Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) · Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) First Published: 2017-06-07 Americas Headquarters Cisco

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)First Published: 2017-06-07

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITEDWARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITHTHE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY,CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain versionof the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDINGANYOTHERWARRANTYHEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS"WITH ALL FAULTS.CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OFMERCHANTABILITY, FITNESS FORA PARTICULAR PURPOSEANDNONINFRINGEMENTORARISING FROMACOURSEOFDEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUTLIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERSHAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, networktopology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentionaland coincidental.

This product includes cryptographic software written by Eric Young ([email protected]).

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (https://www.openssl.org/)This product includes software written by Tim Hudson ([email protected]).

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnershiprelationship between Cisco and any other company. (1110R)

Please send general FSF & GNU inquiries to [email protected]. There are also other ways to contact the FSF. Please send broken links and other corrections or suggestions [email protected]. Please see the Translations README for information on coordinating and submitting translations of this article.Copyright © 2007, 2009, 2011 Free Software Foundation, Inc. Verbatim copying and distribution of this entire article are permitted worldwide, without royalty, in any medium, providedthis notice, and the copyright notice, are preserved. Updated: Date: 2011/06/28 02:44:32

© 2017 Cisco Systems, Inc. All rights reserved.

https://www.openssl.org/https://www.cisco.com/go/trademarkshttps://www.cisco.com/go/trademarksmailto:[email protected]://www.gnu.org/contact/mailto:[email protected]://www.gnu.org/server/standards/README.translations.html

C O N T E N T S

P r e f a c e Preface lv

Audience lv

Document Conventions lv

Related Documentation lvii

Documentation Feedback lvii

C H A P T E R 1 Using the APIC CLI 1

Using the NX-OS Style CLI 1

C H A P T E R 2 A Commands 5

aaa authentication login console 7

aaa authentication login default 8

aaa authentication login domain 9

aaa authentication login fallback-check 10

aaa authentication login ping-check 11

aaa banner 12

aaa group server ldap 13

aaa group server radius 14

aaa group server tacacsplus 15

aaa user default-role 16

absolute 17

access-encap 18

access-group 19

access-list 20

account-status 21

action 22

active-flow-timeout 23

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) iii

address-family 24

address-pool-ref 28

address-pool 29

address-range 30

address 31

admin-state-enable 32

admin 34

advertise-subnet 35

aggregate-address 36

allow-credential 37

allow-origin 38

allow-promiscuous 39

allow-self-as 40

allow-writes 41

allowed-self-as-count 42

analytics 43

application 44

area default-cost 45

area interpod 46

area l3out 47

area loopback 48

area nssa 49

area nssa default-information-originate 50

area nssa no-redistribute 51

area nssa translate 52

area range 53

area route-map 54

area stub 55

arp flooding 56

asn 57

attach-avs 58

attribute-logical-expression 59

attribute 60

authenticate 61

authentication-key-timeout 62

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)iv

Contents

authentication-key 64

authentication 67

auto-cost 70

auto-route-target 71

autonomous-system 72

C H A P T E R 3 B Commands 73

bandwidth 74

basedn 75

bash 76

bfd 77

bfd ip ipv6 authentication 79

bfd ip ipv6 inherit 82

bfd ip ipv6 tenant 84

bgp-fabric 86

bgp 87

binddn 89

bpdu-filter 90

breakout 91

bridge-domain-match 93

bridge-domain 94

C H A P T E R 4 C Commands 97

callhome 100

callhome test info notice emergency alert critical error debug warning node 101

catalog-version 102

cdp 103

cert-chain 107

cert 108

certificate 109

channel-group 110

channel-mode 112

ciphers 115

clear-encryption-key 116

clear-pwd-history 117

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) v

Contents

clear core-status controller 118

clear core-status switch 119

clear core controller 120

clear core switch 121

clear endpoints leaf tenant bridge-domain 122

clear endpoints leaf tenant bridge-domain vlan 123

clear endpoints leaf tenant vrf 124

clear firmware 125

clear snapshot file 126

clear snapshot job 127

clear techsupport controllers 128

clear techsupport switch 129

clear troubleshoot epext session report 130

clear troubleshoot eptoep session report 131

clock display-format 132

clock show-offset 133

clock timezone 134

cluster-device 135

cluster-interface 136

collect 137

comm-policy 138

community-list expanded 139

community-list standard 140

configure-avs 141

configure-dvs 142

configure 143

connection intra-service 144

connection intra-service service1 connector1 service2 connector2 copyservice 145

connection terminal provider consumer service 146

connection terminal provider consumer service connector copyservice 147

connection terminal provider consumer terminal provider consumer copyservice 148

connector 149

console 150

consumer 151

contract-id 152

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)vi

Contents

contract 153

contract consumer 154

contract deny 157

contract enforce 159

contract provider 160

controller-group 163

controller 164

coop-fabric 165

coop 166

copp-aggr 167

cost 168

country 169

crypto aes 170

crypto ca 171

crypto keyring 172

crypto webtoken 173

csr 174

customer-id 175

C H A P T E R 5 D Commands 177

data 179

dead-interval 180

debug log reset 181

debug log set 182

decommission controller 183

decommission switch 184

default-information 185

default-originate 187

delay 188

deny-mode 189

deploy-epg tenant application epg type 190

deploy-epg tenant application epg vlan 192

deployment-mode 194

descr 195

description 196

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) vii

Contents

destination-port 218

destination-profile 219

destination 220

destination address 223

destination destip 225

destination epg 226

destination external-l3 epg tenant l3out epg 228

destination external-l3 epg tenant vrf epg 230

destination interface 232

destination tenant 233

dhcp option 235

dhcp relay policy 236

dhparam 239

direction 240

disable-connected-check 243

disable-peer-as-check 244

distance 245

dns 249

dnssearchsuffix 250

dnsservers 251

dnssuffix 252

dnssvr 253

dnssvrgrp 254

domain 255

dot1q-tunnel 257

dscp 258

dsr-vip 260

dsr 261

C H A P T E R 6 E Commands 263

ebgp-multihop 265

echo-address 266

echo-mode 267

echo-rx-interval 268

email-addr 270

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)viii

Contents

email-contact 271

email 272

enable-bfd 273

enable-ssl 274

encap-mode 275

encap 276

encryption 277

end 278

endpoint 279

endpoint ip aging 280

endpoint loop-detect action bd-learn-disable 281

endpoint loop-detect action port-disable 282

endpoint loop-detect enable 283

endpoint loop-detect factor 284

endpoint loop-detect interval 285

endpoint move-detection 286

endpoint retention bounce-age-interval 287

endpoint retention hold-interval 288

endpoint retention local-age-interval 289

endpoint retention move-frequency 290

endpoint retention policy 291

endpoint retention remote-age-interval 292

enforce-subnet-learning 293

ep-flush 294

epg 295

eraseconfig 296

errdisable recovery cause bpduguard 297

errdisable recovery cause ep-move 298

errdisable recovery cause mcp-loop 299

errdisable recovery interval 300

erspan-id 301

erspan-version 303

evpn 305

evpn consumer 306

evpn export 307

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) ix

Contents

evpn import 308

evpn provider 309

exec 310

exit 311

expiration 312

expires 313

export-config 314

export 315

exporter 317

extcommunity-list expanded 318

extcommunity-list standard 319

external-l2 320

external-l3 321

external-l3 epg 322

external-routed-domain 323

C H A P T E R 7 F Commands 325

fabric-external 327

fabric-internal 328

fabric clear 329

fabric show 330

fc 331

fcoe 332

fcoe fcmap 334

fcoe fka-adv-period 335

fcoe vsan vlan loadbalancing 336

fctimer e-d-tov 338

fctimer r-a-tov 339

feature 341

fex-interface-group 342

fex-profile 343

fex 344

file 346

filter 347

filter tenant bd 349

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)x

Contents

filter tenant vrf 350

fips mode 351

firewall-logging 352

firewall 353

firmware-version 354

firmware 355

firmware repository add 356

firmware repository delete 357

firmware upgrade controller-group 358

firmware upgrade switch-group 359

first-file 360

first-name 361

flow-exporter 362

flow 363

flow exporter 364

flow monitor 366

flow node-policy 367

flow record 369

flow timeout collection 370

flow timeout template 371

flow vm-exporter 372

forged-transmits 373

format 374

forward-error-correction 375

C H A P T E R 8 G Commands 377

global-name 378

graceful-restart-helper 379

graceful-restart 380

group 382

C H A P T E R 9 H Commands 383

hello-interval 384

host-rt-leak 385

hsrp delay 386

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xi

Contents

hsrp enable-bfd 387

hsrp group 388

hsrp use-bia 389

hsrp version 390

http 391

https 392

C H A P T E R 1 0 I Commands 393

idle-flow-timeout 400

immediacy-immediate 401

import-config 402

inband-mgmt 403

inband-mgmt epg 404

inherit-from-epg 405

inherit 407

inherit analytics-policy 414

inherit bfd 415

inherit bgp 416

inherit bgp address-family 417

inherit bgp dampening 418

inherit eigrp 419

inherit fc-fabric-policy 421

inherit fc-leaf-policy 422

inherit hsrp 423

inherit ipv4 424

inherit ipv6 425

inherit isis-fabric 428

inherit node-control-policy 429

inherit node-only 430

inherit ntp-fabric 431

inherit pod-group 432

inherit snmp-fabric 433

inherit vsan-attribute 434

instance 435

interface 436

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xii

Contents

interface ethernet 439

interface inband-mgmt0 441

interface mgmt0 442

interface port-channel 443

interface vfc-po 445

interface vfc 446

interface vlan 447

interface vpc 448

interpod 449

ip 450

ip address-range 453

ip address 455

ip address tenant application 459

ip address tenant external-l2 461

ip address tenant external-l3 463

ip bandwidth 465

ip bfd 468

ip dhcp relay address tenant application 471

ip dhcp relay address tenant external-l2 474

ip dhcp relay address tenant external-l3 475

ip distribute-list eigrp 476

ip dscp 478

ip flow 480

ip hello-interval 484

ip hold-interval 487

ip igmp 490

ip igmp allow-v3-asm 491

ip igmp fast-leave 493

ip igmp group-timeout 495

ip igmp inherit 497

ip igmp last-member-query-count 499

ip igmp last-member-query-response-time 501

ip igmp querier-timeout 502

ip igmp query-interval 504

ip igmp query-max-response-time 506

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xiii

Contents

ip igmp report-link-local-groups 508

ip igmp report-policy 510

ip igmp robustness-variable 512

ip igmp snooping 514

ip igmp snooping access-group route-map leaf interface ethernet ethernet vlan 515

ip igmp snooping access-group route-map leaf interface port-channel vlan 516

ip igmp snooping access-group route-map vpc context interface vpc vlan 517

ip igmp snooping fast-leave 518

ip igmp snooping last-member-query-interval 519

ip igmp snooping policy 520

ip igmp snooping querier 521

ip igmp snooping query-interval 522

ip igmp snooping query-max-response-time 523

ip igmp snooping startup-query-count 524

ip igmp snooping startup-query-interval 525

ip igmp snooping static-group leaf interface ethernet ethernet vlan 526

ip igmp snooping static-group leaf interface port-channel vlan 527

ip igmp snooping static-group vpc context interface vpc vlan 528

ip igmp ssm-translate 529

ip igmp startup-query-count 530

ip igmp startup-query-interval 532

ip igmp state-limit 534

ip igmp state-limit reserved 536

ip igmp static-oif 538

ip igmp version 540

ip multicast 542

ip next-hop-self 543

ip ospf authentication-key 546

ip ospf authentication 548

ip ospf bfd 550

ip ospf cost 552

ip ospf dead-interval 554

ip ospf hello-interval 556

ip ospf inherit 558

ip ospf mtu-ignore 560

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xiv

Contents

ip ospf network 561

ip ospf passive-interface 563

ip ospf prefix-suppression 564

ip ospf priority 566

ip ospf retransmit-interval 568

ip ospf transmit-delay 570

ip passive-interface 572

ip pim 575

ip pim auto-rp forward 576

ip pim auto-rp listen 577

ip pim auto-rp mapping-agent-policy 578

ip pim border 579

ip pim bsr bsr-policy 580

ip pim bsr forward 581

ip pim bsr listen 582

ip pim dr-delay 583

ip pim dr-priority 585

ip pim fast-convergence 587

ip pim hello-authentication 588

ip pim hello-interval 590

ip pim inherit 592

ip pim jp-interval 593

ip pim jp-policy 595

ip pim mtu 597

ip pim neighbor-policy 598

ip pim passive 600

ip pim register-rate-limit 601

ip pim register-source 602

ip pim rp-address 603

ip pim sg-expiry-timer 604

ip pim sparse 605

ip pim ssm route-map 606

ip pim state-limit 607

ip pim state-limit reserved 608

ip pim strict-rfc-compliant 609

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xv

Contents

ip pim use-shared-tree-only 611

ip prefix-list 612

ip prefix-list permit le 613

ip prefix 614

ip prefix permit le 615

ip router eigrp 616

ip router ospf default 618

ip shared address consumer 620

ip shared address provider 621

ip split-horizon 622

ip summary-address eigrp 625

ip throughput-delay 627

ip ttl 630

ipobtainmode 632

iprange 633

ipv6 634

ipv6 address-range 636

ipv6 address 638

ipv6 address tenant application 642

ipv6 address tenant external-l2 644

ipv6 address tenant external-l3 646

ipv6 bandwidth 648

ipv6 bfd 650

ipv6 dhcp relay address tenant application 652

ipv6 dhcp relay address tenant external-l2 653

ipv6 dhcp relay address tenant external-l3 654

ipv6 distribute-list eigrp 655

ipv6 flow 657

ipv6 hello-interval 661

ipv6 hold-interval 663

ipv6 link-local 665

ipv6 nd hop-limit 667

ipv6 nd managed-config-flag 670

ipv6 nd mtu 672

ipv6 nd ns-interval 675

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xvi

Contents

ipv6 nd ns-retries 678

ipv6 nd other-config-flag 681

ipv6 nd policy 683

ipv6 nd prefix 684

ipv6 nd ra-interval 686

ipv6 nd ra-lifetime 689

ipv6 nd reachable-time 692

ipv6 nd retrans-timer 695

ipv6 nd suppress-ra-mtu 698

ipv6 nd suppress-ra 700

ipv6 next-hop-self 702

ipv6 ospf bfd 704

ipv6 ospf cost 706

ipv6 ospf dead-interval 708

ipv6 ospf hello-interval 710

ipv6 ospf inherit 712

ipv6 ospf mtu-ignore 714

ipv6 ospf network 715

ipv6 ospf passive-interface 717

ipv6 ospf prefix-suppression 718

ipv6 ospf priority 720

ipv6 ospf retransmit-interval 722

ipv6 ospf transmit-delay 724

ipv6 passive-interface 726

ipv6 router eigrp 728

ipv6 router ospf default 730

ipv6 shared address consumer 732

ipv6 shared address provider 733

ipv6 split-horizon 734

ipv6 summary-address eigrp 736

ipv6 throughput-delay 738

isis 740

isolation 741

C H A P T E R 1 1 K Commands 743

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xvii

Contents

key 744

C H A P T E R 1 2 L Commands 745

l2-unknown-unicast 748

l2protocol-tunnel 749

l3-unknown-multicast 750

l3out 751

l4l7-cluster 752

l4l7-peer 753

l4l7 754

l4l7 cluster import-from 755

l4l7 cluster name 756

l4l7 graph 757

l4l7 resource-pool 758

label 759

label match 760

label name 761

lacp fast-select-hot-standby 762

lacp graceful-convergence 763

lacp load-defer 764

lacp max-links 765

lacp min-links 767

lacp port-priority 769

lacp port-priority interface 771

lacp rate 772

lacp rate fast normal interface 774

lacp suspend-individual 775

lacp symmetric-hash 776

last-name 777

layer2-switched flow 778

ldap-server attribute 782

ldap-server basedn 783

ldap-server filter 784

ldap-server host 785

ldap-server retries 786

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xviii

Contents

ldap-server timeout 787

leaf-group 788

leaf-interface-group 789

leaf-interface-profile 790

leaf-policy-group 792

leaf-profile 793

leaf 794

legacy 796

link 797

lldp 801

lldp holdtime 805

lldp reinit 806

lldp timer 807

load-balance 808

local-as 810

locality 812

logfile 813

logging 814

logging audit 815

logging description 816

logging event 817

logging fault 818

logging server-group 819

logging session 820

logging severity 821

logit 823

logit severity dest-grp server node 824

lsp-fast-flood 825

lsp-gen-interval 826

lsp-mtu 827

C H A P T E R 1 3 MCommands 829

mac-address 832

mac-changes 835

mac-learning 836

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xix

Contents

match-precedence 837

match 838

match arp 840

match bridge-domain 841

match dscp 842

match icmp 843

match ip 844

match ip multicast group 845

match ip multicast group rp 846

match ip multicast group rp source 847

match ip multicast group source 848

match ip multicast group source rp 849

match ip multicast rp 850

match ip multicast rp group 851

match ip multicast rp group source 852

match ip multicast rp source 853

match ip multicast rp source group 854

match ip multicast source 855

match ip multicast source group 856

match ip multicast source group rp 857

match ip multicast source rp 858

match ip multicast source rp group 859

match ipv6 860

match prefix-list 861

match raw 862

match route group 863

match tcp 864

match udp 865

max-lsa 866

max-validity-period 868

max concurrent 869

max running 870

maxas-limit 871

maximum-paths 872

maximum-prefix 875

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xx

Contents

mcp 877

mcp action 880

mcp control pdu-per-vlan 881

mcp description 882

mcp enable 883

mcp factor 884

mcp init-delay 885

mcp transmit-frequency 886

member 887

message-level 888

message-size 889

metric 890

mgmt-connectivity-pref 892

mgmt-epg 893

microsoft-domain 894

microsoft 895

min-rx 896

min-tx 898

min 900

mode 901

modulus 902

monitor 903

monitor access 904

monitor fabric 905

monitor tenant 906

monitor virtual 907

mtu-ignore 908

mtu 909

multi-destination 913

multi-site-mac-address 914

multicast-address 915

multiplier 916

C H A P T E R 1 4 N Commands 919

name-alias 920

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxi

Contents

name-lookup 924

name 925

negotiate 926

neighbor 929

network 931

next-hop-self 932

node-control 933

npv 934

npv auto-load-balance 935

npv traffic-map external-interface vfc-po 936

npv traffic-map external-interface vfc 938

npv traffic-map server-interface vfc-po 939

npv traffic-map server-interface vfc 941

ntp 943

C H A P T E R 1 5 O Commands 945

oob-mgmt 946

oob-mgmt epg 947

optimize 948

option 949

org-name 950

org-unit-name 951

C H A P T E R 1 6 P Commands 953

passive-interface 955

passphrase 956

password 957

password change-count 959

password change-during-interval 960

password change-interval 961

password change-password 962

password history-count 963

password no-change-interval 964

password pwd-strength-check 965

path 966

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxii

Contents

pause 967

peer-dead-interval 968

periodic-inventory notification 969

phone-contact 970

phone 971

pod-profile 972

pod 973

pods 974

policy-group 975

policy-map type control-plane-if 977

policy-map type control-plane-leaf 978

policy-map type control-plane-spine 979

policy-map type data-plane 980

policy-map type qos 981

port 982

porttrack delay 985

porttrack minlinks 986

porttrack state 987

power 988

preempt 989

preempt delay 990

prefix-suppression 992

preview 993

priority-flow-control 994

priority 997

priv-type 1000

priv 1001

private-as-control 1002

profile-type 1003

protocol 1004

protocol bps 1005

provider 1006

proxy-arp 1007

pwd-lifetime 1008

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxiii

Contents

C H A P T E R 1 7 Q Commands 1009

qos 1010

qos parameters 1011

qos preserve 1012

query-profile 1013

query 1014

queue control 1015

queue limit 1016

quota 1017

C H A P T E R 1 8 R Commands 1019

radius-server host 1021

radius-server retries 1022

radius-server timeout 1023

rbac role 1024

rbac rule 1025

rbac security-domain 1026

realm 1027

record 1028

recurring 1029

redir-dest 1030

redirect 1031

redistribute 1032

redundancy-mode 1033

region 1034

reload controller 1035

reload switch 1036

remote-as 1037

remote 1038

replace-controller replace 1040

replace-controller reset 1041

request-status-count 1042

reset-to-factory 1043

response-incl 1044

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxiv

Contents

response-subtree 1045

retransmit-interval 1046

retries 1047

reverse-port 1048

revision 1049

role 1050

route-control 1051

route-map 1052

route-profile 1055

route-reflector 1056

route-target 1057

router-id 1059

router bgp 1061

router eigrp 1062

router ospf 1063

rtr-cfg 1064

run-mode 1065

C H A P T E R 1 9 S Commands 1067

sampling-rate 1092

schedule 1093

scheduler 1094

scheduling 1095

scope 1096

scvmm 1098

second-file 1099

security-domain 1100

security 1101

security allow-promiscuous 1102

security forged-transmits 1103

security mac-changes 1104

send-community 1105

server 1106

service-policy 1109

service 1114

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxv

Contents

session-record-flags 1115

set 1116

set addcommunity 1119

set burst 1124

set cir 1125

set community 1126

set conform-cos-transmit 1133

set conform-dscp-transmit 1134

set conform 1135

set dampening 1136

set dscp-code 1141

set dscp 1142

set exceed-cos-transmit 1143

set exceed-dscp-transmit 1144

set exceed 1145

set excessive-burst 1146

set local-preference 1147

set metric-type 1151

set metric 1155

set mode 1159

set next-hop 1160

set pir 1164

set qos-class 1165

set tag 1167

set target-dscp 1171

set type 1172

set violate-cos-transmit 1173

set violate-dscp-transmit 1174

set violate 1175

set weight 1176

shellinabox 1180

show aaa authentication 1181

show aaa groups 1182

show access-list 1183

show accounting log 1184

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxvi

Contents

show acllog deny l2 flow 1185

show acllog deny l2 flow tenant vrf 1186

show acllog deny l2 flow tenant vrf detail 1187

show acllog deny l2 pkt 1188

show acllog deny l2 pkt tenant vrf 1189

show acllog deny l2 pkt tenant vrf detail 1190

show acllog deny l3 flow 1191

show acllog deny l3 flow tenant vrf 1192

show acllog deny l3 flow tenant vrf detail 1193

show acllog deny l3 pkt 1194

show acllog deny l3 pkt tenant vrf 1195

show acllog deny l3 pkt tenant vrf detail 1196

show acllog permit l2 flow tenant vrf 1198

show acllog permit l2 flow tenant vrf detail 1199

show acllog permit l2 pkt tenant vrf 1200

show acllog permit l2 pkt tenant vrf detail 1201

show acllog permit l3 flow tenant vrf 1202

show acllog permit l3 flow tenant vrf detail 1203

show acllog permit l3 pkt tenant vrf 1204

show acllog permit l3 pkt tenant vrf detail 1205

show analytics 1207

show application 1208

show audits 1209

show audits tenant 1210

show audits tenant application 1211

show audits tenant application epg 1212

show audits tenant bridge-domain 1213

show audits tenant bridge-domain detail 1214

show audits tenant dnsservergroup 1215

show audits tenant dnsservergroup server 1216

show audits tenant dnsservergroup server domain 1217

show audits tenant interface bridge-domain 1218

show audits tenant interface bridge-domain detail 1219

show audits tenant multicast-route-maps 1220

show audits tenant vrf 1221

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxvii

Contents

show audits tenant vrf acllog l2 1222

show audits tenant vrf acllog l3 1223

show audits tenant vrf detail 1225

show audits tenant vrf external-l3 bgp 1226

show audits tenant vrf external-l3 bgp node 1227

show audits tenant vrf external-l3 eigrp 1228

show audits tenant vrf external-l3 eigrp detail 1229

show audits tenant vrf external-l3 epg 1230

show audits tenant vrf external-l3 epg detail 1231

show audits tenant vrf external-l3 epg name 1232

show audits tenant vrf external-l3 epg name detail 1233

show audits tenant vrf external-l3 interfaces 1234

show audits tenant vrf external-l3 interfaces detail 1235

show audits tenant vrf external-l3 ospf 1236

show audits tenant vrf external-l3 ospf detail 1237

show audits tenant vrf external-l3 static-route 1238

show audits tenant vrf external-l3 static-route detail 1239

show audits tenant vrf external-l3 static-route node 1240

show audits tenant vrf external-l3 static-route node detail 1241

show audits tenant vrf multicast 1242

show bridge-domain 1243

show bridge-domain detail 1244

show callhome 1245

show callhome common destination-profile 1246

show callhome common query-profile 1247

show callhome common transport-email 1248

show catalog 1249

show cli command 1250

show cli internal audit 1251

show cli internal transaction 1252

show cli internal usage 1253

show cli list 1254

show cli manpage 1255

show cli path 1256

show clock 1257

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxviii

Contents

show communication ciphers 1258

show communication controller 1259

show communication http 1260

show communication https 1261

show communication shellinabox 1262

show communication ssh-service 1263

show communication telnet 1264

show communication web-requests 1265

show contract-type 1266

show contract 1267

show controller 1268

show controller detail 1269

show cores 1270

show cores status 1271

show debug counter 1272

show debug log 1273

show deployment endpoint node 1274

show dns-address 1275

show dns-domain 1276

show dot1q-tunnel 1277

show endpoints 1278

show endpoints leaf interface ethernet 1279

show endpoints leaf interface port-channel 1280

show endpoints vpc 1281

show epg 1282

show epg detail 1283

show events 1284

show events controller 1285

show events controller detail 1286

show events leaf 1287

show events leaf fex 1288

show events leaf fex module 1289

show events leaf interface ethernet 1290

show events leaf interface l3instance 1291

show events leaf interface mgmt 1292

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxix

Contents

show events leaf interface portchannel 1293

show events leaf interface tunnel 1294

show events leaf inventory chassis 1295

show events leaf inventory fans 1296

show events leaf inventory module 1297

show events leaf inventory module fabricport 1298

show events leaf inventory module leafport 1299

show events leaf inventory powersupply 1300

show events leaf inventory supervisor 1301

show events leaf protocol 1302

show events leaf vpc 1303

show events leaf vrf 1304

show events spine 1305

show events spine interface ethernet 1306

show events spine interface l3instance 1307

show events spine interface mgmt 1308

show events spine interface tunnel 1309

show events spine inventory chassis 1310

show events spine inventory fabric 1311

show events spine inventory fans 1312

show events spine inventory module 1313

show events spine inventory module fabricport 1314

show events spine inventory powersupply 1315

show events spine inventory supervisor 1316

show events spine inventory system 1317

show events spine protocol 1318

show events spine vrf 1319

show events tenant 1320

show events tenant application 1321

show events tenant application epg 1322

show events tenant bridge-domain 1323

show events tenant bridge-domain detail 1324

show events tenant dnsservergroup 1325

show events tenant dnsservergroup server 1326

show events tenant dnsservergroup server domain 1327

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxx

Contents

show events tenant endpoints 1328

show events tenant endpoints leaf interface ethernet 1329

show events tenant endpoints leaf interface port-channel 1330

show events tenant endpoints vpc 1331

show events tenant interface bridge-domain 1333

show events tenant interface bridge-domain detail 1334

show events tenant multicast-route-maps 1335

show events tenant vrf 1336

show events tenant vrf acllog l2 1337

show events tenant vrf acllog l3 1338

show events tenant vrf detail 1340

show events tenant vrf external-l3 bgp 1341

show events tenant vrf external-l3 bgp node 1342

show events tenant vrf external-l3 eigrp 1343

show events tenant vrf external-l3 eigrp detail 1344

show events tenant vrf external-l3 epg 1345

show events tenant vrf external-l3 epg detail 1346

show events tenant vrf external-l3 epg name 1347

show events tenant vrf external-l3 epg name detail 1348

show events tenant vrf external-l3 interfaces 1349

show events tenant vrf external-l3 interfaces detail 1350

show events tenant vrf external-l3 ospf 1351

show events tenant vrf external-l3 ospf detail 1352

show events tenant vrf external-l3 route-map 1353

show events tenant vrf external-l3 route-map detail 1354

show events tenant vrf external-l3 static-route 1355

show events tenant vrf external-l3 static-route detail 1356

show events tenant vrf external-l3 static-route node 1357

show events tenant vrf external-l3 static-route node detail 1358

show events tenant vrf multicast 1359

show external-l2 epg 1360

show external-l2 epg name 1361

show external-l2 epg tenant 1362

show external-l3 bgp 1363

show external-l3 bgp tenant 1364

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxi

Contents

show external-l3 bgp tenant vrf 1365

show external-l3 bgp tenant vrf node 1366

show external-l3 eigrp 1367

show external-l3 eigrp detail 1368

show external-l3 eigrp node 1369

show external-l3 eigrp node detail 1370

show external-l3 eigrp tenant 1371

show external-l3 eigrp tenant detail 1372

show external-l3 eigrp tenant vrf 1373

show external-l3 eigrp tenant vrf detail 1374

show external-l3 eigrp tenant vrf node 1375

show external-l3 eigrp tenant vrf node detail 1376

show external-l3 epg 1377

show external-l3 epg detail 1378

show external-l3 epg name 1379

show external-l3 epg name detail 1380

show external-l3 epg tenant 1381

show external-l3 epg tenant detail 1382

show external-l3 epg tenant vrf 1383

show external-l3 epg tenant vrf detail 1384

show external-l3 interfaces 1385

show external-l3 interfaces detail 1386

show external-l3 interfaces node 1387

show external-l3 interfaces node detail 1388

show external-l3 interfaces tenant 1389

show external-l3 interfaces tenant detail 1390

show external-l3 interfaces tenant vrf 1391

show external-l3 interfaces tenant vrf detail 1392

show external-l3 interfaces tenant vrf node 1393

show external-l3 interfaces tenant vrf node detail 1394

show external-l3 ospf 1395

show external-l3 ospf detail 1396

show external-l3 ospf node 1397

show external-l3 ospf node detail 1398

show external-l3 ospf tenant 1399

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxxii

Contents

show external-l3 ospf tenant detail 1400

show external-l3 ospf tenant vrf 1401

show external-l3 ospf tenant vrf detail 1402

show external-l3 ospf tenant vrf node 1403

show external-l3 ospf tenant vrf node detail 1404

show external-l3 route-map 1405

show external-l3 route-map detail 1406

show external-l3 route-map name 1407

show external-l3 route-map name detail 1408

show external-l3 route-map tenant 1409

show external-l3 route-map tenant detail 1410

show external-l3 route-map tenant vrf 1411

show external-l3 route-map tenant vrf detail 1412

show external-l3 route-map tenant vrf node 1413

show external-l3 route-map tenant vrf node detail 1414

show external-l3 static-route 1415

show external-l3 static-route detail 1416

show external-l3 static-route node 1417

show external-l3 static-route node detail 1418

show external-l3 static-route tenant 1419

show external-l3 static-route tenant detail 1420

show external-l3 static-route tenant vrf 1421

show external-l3 static-route tenant vrf detail 1422

show external-l3 static-route tenant vrf node 1423

show external-l3 static-route tenant vrf node detail 1424

show fabric-recovery status 1425

show faults 1426

show faults controller 1428

show faults controller detail 1429

show faults l4l7-cluster 1430

show faults l4l7-graph 1431

show faults leaf 1432

show faults leaf fex 1433

show faults leaf fex module 1434

show faults leaf interface ethernet 1435

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxiii

Contents

show faults leaf interface l3instance 1436

show faults leaf interface mgmt 1437

show faults leaf interface portchannel 1438

show faults leaf interface tunnel 1439

show faults leaf inventory chassis 1440

show faults leaf inventory fans 1441

show faults leaf inventory module 1442

show faults leaf inventory module fabricport 1443

show faults leaf inventory module leafport 1444

show faults leaf inventory powersupply 1445

show faults leaf inventory supervisor 1446

show faults leaf protocol 1447

show faults leaf vpc 1448

show faults leaf vrf 1449

show faults microsoft domain 1450

show faults microsoft domain name 1451

show faults microsoft domain name hyperv 1452

show faults microsoft domain name port-group 1453

show faults microsoft domain name scvmm 1454

show faults microsoft domain name vm 1455

show faults microsoft domain name vm name 1456

show faults quota 1457

show faults spine 1458

show faults spine interface ethernet 1459

show faults spine interface l3instance 1460

show faults spine interface mgmt 1461

show faults spine interface tunnel 1462

show faults spine inventory chassis 1463

show faults spine inventory fabric 1464

show faults spine inventory fans 1465

show faults spine inventory module 1466

show faults spine inventory module fabricport 1467

show faults spine inventory powersupply 1468

show faults spine inventory supervisor 1469

show faults spine inventory system 1470

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxxiv

Contents

show faults spine protocol 1471

show faults spine vrf 1472

show faults tenant 1473

show faults tenant application 1474

show faults tenant application epg 1475

show faults tenant bridge-domain 1476

show faults tenant bridge-domain detail 1477

show faults tenant dnsservergroup 1478

show faults tenant dnsservergroup server 1479

show faults tenant dnsservergroup server domain 1480

show faults tenant interface bridge-domain 1481

show faults tenant interface bridge-domain detail 1482

show faults tenant multicast-route-maps 1483

show faults tenant vrf 1484

show faults tenant vrf acllog l2 1485

show faults tenant vrf acllog l3 1486

show faults tenant vrf detail 1488

show faults tenant vrf external-l3 bgp 1489

show faults tenant vrf external-l3 bgp node 1490

show faults tenant vrf external-l3 eigrp 1491

show faults tenant vrf external-l3 eigrp detail 1492

show faults tenant vrf external-l3 epg 1493

show faults tenant vrf external-l3 epg detail 1494

show faults tenant vrf external-l3 epg name 1495

show faults tenant vrf external-l3 epg name detail 1496

show faults tenant vrf external-l3 interfaces 1497

show faults tenant vrf external-l3 interfaces detail 1498

show faults tenant vrf external-l3 ospf 1499

show faults tenant vrf external-l3 ospf detail 1500

show faults tenant vrf external-l3 static-route 1501

show faults tenant vrf external-l3 static-route detail 1502

show faults tenant vrf external-l3 static-route node 1503

show faults tenant vrf external-l3 static-route node detail 1504

show faults tenant vrf multicast 1505

show faults vmware domain 1506

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxv

Contents

show faults vmware domain name 1507

show faults vmware domain name epg 1508

show faults vmware domain name esx 1509

show faults vmware domain name port-group 1510

show faults vmware domain name trunk-portgroup 1511

show faults vmware domain name vcenter 1512

show faults vmware domain name vm 1513

show faults vmware domain name vm name 1514

show fips 1515

show fips status 1516

show firmware repository 1517

show firmware repository detail 1518

show firmware upgrade status 1519

show firmware upgrade status controller-group 1520

show firmware upgrade status controller-group detail 1521

show firmware upgrade status detail 1522

show firmware upgrade status switch-group 1523

show firmware upgrade status switch-group detail 1524

show flow exporter 1525

show flow exporter infra 1526

show flow exporter tenant 1527

show flow monitor 1528

show flow monitor infra 1529

show flow monitor tenant 1530

show flow node-policy 1531

show flow node-policy detail 1532

show flow record 1533

show flow record infra 1534

show flow record tenant 1535

show flow vm-exporter 1536

show health 1537

show health leaf 1538

show health leaf fex 1539

show health leaf fex module 1540

show health leaf interface ethernet 1541

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxxvi

Contents

show health leaf interface l3instance 1542

show health leaf interface mgmt 1543

show health leaf interface portchannel 1544

show health leaf interface tunnel 1545

show health leaf inventory chassis 1546

show health leaf inventory fans 1547

show health leaf inventory module 1548

show health leaf inventory module fabricport 1549

show health leaf inventory module leafport 1550

show health leaf inventory powersupply 1551

show health leaf inventory supervisor 1552

show health leaf protocol 1553

show health leaf vpc 1554

show health leaf vrf 1555

show health spine 1556

show health spine interface ethernet 1557

show health spine interface l3instance 1558

show health spine interface mgmt 1559

show health spine interface tunnel 1560

show health spine inventory chassis 1561

show health spine inventory fabric 1562

show health spine inventory fans 1563

show health spine inventory module 1564

show health spine inventory module fabricport 1565

show health spine inventory powersupply 1566

show health spine inventory supervisor 1567

show health spine inventory system 1568

show health spine protocol 1569

show health spine vrf 1570

show health tenant 1571

show health tenant application 1572

show health tenant application epg 1573

show health tenant bridge-domain 1574

show health tenant bridge-domain detail 1575

show health tenant dnsservergroup 1576

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxvii

Contents

show health tenant dnsservergroup server 1577

show health tenant dnsservergroup server domain 1578

show health tenant interface bridge-domain 1579

show health tenant interface bridge-domain detail 1580

show health tenant multicast-route-maps 1581

show health tenant vrf 1582

show health tenant vrf acllog l2 1583

show health tenant vrf acllog l3 1584

show health tenant vrf detail 1586

show health tenant vrf external-l3 bgp 1587

show health tenant vrf external-l3 bgp node 1588

show health tenant vrf external-l3 eigrp 1589

show health tenant vrf external-l3 eigrp detail 1590

show health tenant vrf external-l3 epg 1591

show health tenant vrf external-l3 epg detail 1592

show health tenant vrf external-l3 epg name 1593

show health tenant vrf external-l3 epg name detail 1594

show health tenant vrf external-l3 interfaces 1595

show health tenant vrf external-l3 interfaces detail 1596

show health tenant vrf external-l3 ospf 1597

show health tenant vrf external-l3 ospf detail 1598

show health tenant vrf external-l3 static-route 1599

show health tenant vrf external-l3 static-route detail 1600

show health tenant vrf external-l3 static-route node 1601

show health tenant vrf external-l3 static-route node detail 1602

show health tenant vrf multicast 1603

show inband-mgmt 1604

show inband-mgmt controller 1605

show inband-mgmt switch 1606

show interface bridge-domain 1607

show interface bridge-domain detail 1608

show ip interface bridge-domain 1609

show ipv6 interface bridge-domain 1610

show l4l7-cluster 1611

show l4l7-graph 1612

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxxviii

Contents

show l4l7-package 1613

show ldap-server 1614

show locator-led 1615

show locator-led status leaf 1616

show microsoft domain 1617

show microsoft domain name 1618

show microsoft domain name hyperv 1619

show microsoft domain name port-group 1620

show microsoft domain name scvmm 1621

show microsoft domain name vm 1622

show microsoft domain name vm name 1623

show microsoft vm 1624

show monitor access 1625

show monitor fabric 1626

show monitor tenant 1627

show monitor virtual 1628

show name-alias tenant 1629

show name-alias tenant acl 1630

show name-alias tenant application 1631

show name-alias tenant application epg 1632

show name-alias tenant bridge-domain 1633

show name-alias tenant contract 1634

show name-alias tenant contract subject 1635

show name-alias tenant l3out 1636

show name-alias tenant vrf 1637

show ntpq 1638

show oob-mgmt 1639

show oob-mgmt controller 1640

show oob-mgmt switch 1641

show pd-recovery status 1642

show policy-map 1643

show policy-map type data-plane 1644

show policy-map type qos 1645

show port-channel leaf 1646

show port-channel map 1647

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxix

Contents

show port-channel map leaf 1648

show quota 1649

show radius-server 1650

show resource 1651

show resource conflict encap-vlan epg 1652

show resource conflict encap-vlan epg node 1653

show role 1654

show running-config 1655

show sessions 1656

show sessions controller 1657

show sessions controller detail 1658

show sessions leaf 1659

show sessions spine 1660

show snapshot active 1661

show snapshot files 1662

show snapshot jobs 1663

show snmp 1664

show snmp clientgroups 1665

show snmp community 1666

show snmp engineid 1667

show snmp hosts 1668

show snmp summary 1669

show snmp users 1670

show stats 1671

show stats granularity communication controller 1672

show stats granularity leaf 1673

show stats granularity leaf fex 1674

show stats granularity leaf fex module 1675

show stats granularity leaf interface ethernet 1676

show stats granularity leaf interface mgmt 1677

show stats granularity leaf interface portchannel 1678

show stats granularity leaf inventory chassis 1679

show stats granularity leaf inventory fans 1680

show stats granularity leaf inventory powersupply 1681

show stats granularity leaf inventory supervisor 1682

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xl

Contents

show stats granularity spine 1683

show stats granularity spine interface ethernet 1684

show stats granularity spine interface mgmt 1685

show stats granularity spine inventory chassis 1686

show stats granularity spine inventory fabric 1687

show stats granularity spine inventory fans 1688

show stats granularity spine inventory module 1689

show stats granularity spine inventory powersupply 1690

show stats granularity spine inventory supervisor 1691

show stats granularity spine inventory system 1692

show stats granularity tenant 1693

show stats granularity tenant application 1694

show stats granularity tenant application epg 1695

show stats granularity tenant dnsservergroup 1696

show stats granularity tenant dnsservergroup server 1697

show stats granularity tenant dnsservergroup server domain 1698

show stats granularity tenant dot1q-tunnel 1699

show stats granularity tenant multicast-route-maps 1700

show stats granularity tenant vrf 1701

show stats granularity tenant vrf acllog l2 1702

show stats granularity tenant vrf acllog l3 1703

show stats granularity tenant vrf detail 1704

show stats granularity tenant vrf external-l3 bgp 1705

show stats granularity tenant vrf external-l3 bgp node 1706

show stats granularity tenant vrf external-l3 eigrp 1707

show stats granularity tenant vrf external-l3 eigrp detail 1708

show stats granularity tenant vrf external-l3 epg 1709

show stats granularity tenant vrf external-l3 epg detail 1710

show stats granularity tenant vrf external-l3 epg name 1711

show stats granularity tenant vrf external-l3 epg name detail 1712

show stats granularity tenant vrf external-l3 interfaces 1713

show stats granularity tenant vrf external-l3 interfaces detail 1714

show stats granularity tenant vrf external-l3 ospf 1715

show stats granularity tenant vrf external-l3 ospf detail 1716

show stats granularity tenant vrf external-l3 static-route 1717

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xli

Contents

show stats granularity tenant vrf external-l3 static-route detail 1718

show stats granularity tenant vrf external-l3 static-route node 1719

show stats granularity tenant vrf external-l3 static-route node detail 1720

show stats granularity tenant vrf multicast 1721

show switch 1722

show switch detail 1723

show tacacs-server 1724

show techsupport all 1725

show techsupport controllers 1726

show techsupport host 1727

show techsupport switch 1728

show tenant 1729

show tenant access-list 1730

show tenant application 1731

show tenant application endpoints 1732

show tenant application endpoints leaf interface ethernet 1733

show tenant application endpoints leaf interface port-channel 1734

show tenant application endpoints vpc 1735

show tenant application epg 1736

show tenant application epg detail 1737

show tenant application epg endpoints 1738

show tenant application epg endpoints leaf interface ethernet 1739

show tenant application epg endpoints leaf interface port-channel 1740

show tenant application epg endpoints vpc 1741

show tenant bridge-domain 1743

show tenant bridge-domain detail 1744

show tenant contract-type 1745

show tenant contract 1746

show tenant detail 1747

show tenant dnsservergroup 1748

show tenant dnsservergroup server 1749

show tenant dnsservergroup server domain 1750

show tenant dot1q-tunnel 1751

show tenant endpoints 1752

show tenant endpoints leaf interface ethernet 1753

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xlii

Contents

show tenant endpoints leaf interface port-channel 1754

show tenant endpoints vpc 1755

show tenant epg 1756

show tenant epg detail 1757

show tenant external-l2 epg 1758

show tenant interface bridge-domain 1759

show tenant interface bridge-domain detail 1760

show tenant ip interface bridge-domain 1761

show tenant ipv6 interface bridge-domain 1762

show tenant multicast-route-maps 1763

show tenant policy-map 1764

show tenant policy-map type data-plane 1765

show tenant policy-map type qos 1766

show tenant vrf 1767

show tenant vrf acllog l2 1768

show tenant vrf acllog l3 1769

show tenant vrf detail 1770

show tenant vrf external-l3 bgp 1771

show tenant vrf external-l3 bgp node 1772

show tenant vrf external-l3 eigrp 1773

show tenant vrf external-l3 eigrp detail 1774

show tenant vrf external-l3 epg 1775

show tenant vrf external-l3 epg detail 1776

show tenant vrf external-l3 epg name 1777

show tenant vrf external-l3 epg name detail 1778

show tenant vrf external-l3 interfaces 1779

show tenant vrf external-l3 interfaces detail 1780

show tenant vrf external-l3 ospf 1781

show tenant vrf external-l3 ospf detail 1782

show tenant vrf external-l3 route-map 1783

show tenant vrf external-l3 route-map detail 1784

show tenant vrf external-l3 static-route 1785

show tenant vrf external-l3 static-route detail 1786

show tenant vrf external-l3 static-route node 1787

show tenant vrf external-l3 static-route node detail 1788

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xliii

Contents

show tenant vrf multicast 1789

show troubleshoot epext session 1790

show troubleshoot epext session atomiccounter 1791

show troubleshoot epext session audit 1792

show troubleshoot epext session contracts 1793

show troubleshoot epext session deployments 1794

show troubleshoot epext session events 1795

show troubleshoot epext session faults 1796

show troubleshoot epext session latency 1797

show troubleshoot epext session monitor 1798

show troubleshoot epext session reports 1799

show troubleshoot epext session statistics 1800

show troubleshoot epext session topology 1801

show troubleshoot epext session traceroute 1802

show troubleshoot epext sessions 1803

show troubleshoot eptoep session 1804

show troubleshoot eptoep session atomiccounter 1805

show troubleshoot eptoep session audit 1806

show troubleshoot eptoep session contracts 1807

show troubleshoot eptoep session deployments 1808

show troubleshoot eptoep session events 1809

show troubleshoot eptoep session faults 1810

show troubleshoot eptoep session latency 1811

show troubleshoot eptoep session monitor 1812

show troubleshoot eptoep session reports 1813

show troubleshoot eptoep session statistics 1814

show troubleshoot eptoep session topology 1815

show troubleshoot eptoep session traceroute 1816

show troubleshoot eptoep sessions 1817

show username 1818

show username detail 1819

show version 1820

show vlan-domain 1821

show vmm internal debug 1822

show vmm internal debug epg 1823

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xliv

Contents

show vmm internal debug mac 1824

show vmware domain 1825

show vmware domain name 1826

show vmware domain name epg 1827

show vmware domain name esx 1828

show vmware domain name port-group 1829

show vmware domain name trunk-portgroup 1830

show vmware domain name vcenter 1831

show vmware domain name vm 1832

show vmware domain name vm name 1833

show vmware vm 1834

show vpc 1835

show vpc map leaf 1836

show vrf 1837

show vrf detail 1838

show vsan-domain 1839

shut 1840

shutdown 1841

site-id 1845

slow-drain congestion-timeout action 1846

slow-drain congestion-timeout count 1849

slow-drain pause 1852

slow-timer 1855

snapshot download 1856

snapshot export 1857

snapshot import 1858

snapshot rollback 1859

snapshot upload 1860

snmp-server clientgroup 1861

snmp-server community 1862

snmp-server contact 1863

snmp-server host 1864

snmp-server location 1865

snmp-server protocol 1866

snmp-server user 1867

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xlv

Contents

source 1868

source application 1870

source interface ethernet 1871

source interface port-channel 1872

source interface vpc 1873

spanning-tree 1874

spanning-tree bpdu-filter 1878

spanning-tree bpdu-guard 1879

speed 1880

spf-interval 1883

spine-group 1884

spine-interface-group 1885

spine-interface-policy-group 1886

spine-interface-profile 1888

spine-policy-group 1889

spine-profile 1890

spine 1891

ssh-key 1892

ssh-service 1893

ssl-protocols 1894

ssl-validation-level 1895

state 1896

static-endpoint 1897

static-tep 1901

statistics 1905

storm-control broadcast level 1906

storm-control broadcast pps 1909

storm-control level 1912

storm-control multicast level 1915

storm-control multicast pps 1918

storm-control pps 1921

storm-control unicast level 1924

storm-control unicast pps 1927

street-address 1930

subject 1931

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xlvi

Contents

subnet 1932

summary-address 1933

svcredir-pol 1934

switch-group 1935

switch 1936

switching 1937

switchport 1938

switchport access vlan tenant application 1940

switchport access vlan tenant external-svi 1944

switchport mode 1947

switchport port-security maximum 1951

switchport port-security timeout 1954

switchport port-security violation 1957

switchport tenant 1960

switchport trunk allowed vlan inband-mgmt 1963

switchport trunk allowed vlan tenant application 1964

switchport trunk allowed vlan tenant external-l2 1968

switchport trunk allowed vlan tenant external-svi 1971

switchport trunk allowed vlan tenant legacy-forwarding 1974

switchport trunk allowed vsan tenant application 1977

switchport trunk native vlan tenant application 1980

switchport trunk native vlan tenant external-svi 1984

switchport vepa 1987

switchport vlan 1990

switchport vsan 1993

switchport vsan tenant application 1996

syslog 1997

system cluster-size 1998

system controller-id 1999

system dynamic-load-balance 2000

system fabric-security-mode 2001

system jumbomtu 2002

system pod 2003

system switch-id 2004

system use-infra-gipo 2005

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xlvii

Contents

C H A P T E R 2 0 T Commands 2007

tacacs-server host 2011

tacacs-server retries 2012

tacacs-server timeout 2013

tag 2014

target 2016

telnet 2017

template bfd 2018

template bgp address-family 2020

template bgp timers 2021

template dhcp option 2022

template dhcp relay 2023

template eigrp interface-policy 2024

template eigrp vrf-policy 2025

template endpoint retention policy 2026

template fc-fabric-policy 2027

template fc-leaf-policy 2028

template hsrp group-policy 2029

template hsrp interface-policy 2030

template ip igmp interface-policy 2031

template ip igmp snooping policy 2032

template ip pim interface-policy 2033

template ipv6 nd policy 2034

template ipv6 nd prefix 2036

template isis-fabric 2037

template leaf-policy-group 2038

template ntp-fabric 2039

template ospf interface-policy 2040

template ospf vrf-policy 2041

template pod-group 2042

template policy-group 2043

template port-channel 2044

template route-profile 2045

template route group 2047

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xlviii

Contents

template route tag 2048

template snmp-fabric 2049

template spine-interface-policy-group 2050

template spine-policy-group 2051

template vsan-attribute 2052

tenant 2053

terminal 2054

time 2055

time start daily 2056

time start weekly 2057

timeout 2058

timers 2059

timers lsa-arrival 2063

timers lsa-group-pacing 2064

timers throttle lsa 2065

timers throttle spf 2067

tp 2069

transmit-delay 2070

transport 2071

transport email from 2073

transport email mail-server 2074

transport email reply-to 2075

trigger fabric-recovery 2076

trigger shutdown 2077

trigger snapshot download 2078

trigger snapshot export 2079

trigger snapshot import 2080

trigger snapshot rollback 2081

trigger snapshot upload 2082

trigger techsupport all 2083

trigger techsupport controllers 2084

trigger techsupport host 2085

trigger techsupport local 2086

trigger techsupport switch 2087

trigger troubleshoot epext session report 2088

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xlix

Contents

trigger troubleshoot eptoep session report 2089

trigger vmware 2090

troubleshoot epext session atomiccounter 2091

troubleshoot epext session description 2092

troubleshoot epext session latestminutes 2093

troubleshoot epext session monitor destination apic 2094

troubleshoot epext session monitor destination prefdestgroup 2095

troubleshoot epext session monitor destination tenant 2096

troubleshoot epext session scheduler 2098

troubleshoot epext session srcextip destip tenant application 2099

troubleshoot epext session srcextip destip tenant vrf 2100

troubleshoot epext session srcip tenant application epg destextip 2101

troubleshoot epext session srcip tenant vrf destextip 2102

troubleshoot epext session starttime 2103

troubleshoot epext session traceroute 2104

troubleshoot epext session traceroute protocol icmp 2105

troubleshoot epext session traceroute protocol tcp 2106

troubleshoot epext session traceroute protocol udp 2107

troubleshoot eptoep session atomiccounter 2108

troubleshoot eptoep session description 2109

troubleshoot eptoep session latestminutes 2110

troubleshoot eptoep session monitor destination apic 2111

troubleshoot eptoep session monitor destination prefdestgroup 2112

troubleshoot eptoep session monitor destination tenant 2113

troubleshoot eptoep session scheduler 2115

troubleshoot eptoep session srcip tenant application epg destip tenant application 2116

troubleshoot eptoep session srcip tenant application epg destip tenant vrf 2117

troubleshoot eptoep session srcip tenant vrf destip tenant application 2118

troubleshoot eptoep session srcip tenant vrf destip tenant vrf 2119

troubleshoot eptoep session srcmac tenant application epg destmac tenant application 2120

troubleshoot eptoep session srcmac tenant application epg destmac tenant vrf 2122

troubleshoot eptoep session srcmac tenant vrf destmac tenant application 2124

troubleshoot eptoep session srcmac tenant vrf destmac tenant vrf 2126

troubleshoot eptoep session starttime 2128

troubleshoot eptoep session traceroute 2129

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)l

Contents

troubleshoot eptoep session traceroute protocol icmp 2130

troubleshoot eptoep session traceroute protocol tcp 2131

troubleshoot eptoep session traceroute protocol udp 2132

trunk-portgroup 2133

trusted-key 2134

try 2135

C H A P T E R 2 1 U Commands 2137

ui-idle-timeout-seconds 2138

unicast 2139

update-source ethernet 2140

update-source loopback 2141

update-source vlan 2142

usage 2143

use-bia 2144

use-keyring 2145

use-vrf 2146

user 2147

username 2148

C H A P T E R 2 2 V Commands 2149

vcenter 2151

vemcmd show avs 2152

vemcmd show cdp 2153

vemcmd show dfw connection 2154

vemcmd show dfw flows 2155

vemcmd show dfw globals 2156

vemcmd show dfw interfaces 2157

vemcmd show dfw port-drop 2158

vemcmd show dfw session 2159

vemcmd show dfwdenyflows 2160

vemcmd show dfwflows ftp 2161

vemcmd show dfwflows internal 2162

vemcmd show dfwflows ltl 2163

vemcmd show dfwslflows 2164

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) li

Contents

vemcmd show epp 2165

vemcmd show heap 2166

vemcmd show host 2167

vemcmd show l2 2168

vemcmd show lacp 2169

vemcmd show lldp 2170

vemcmd show mempool 2171

vemcmd show microsegment tables brief 2172

vemcmd show microsegment tables info 2173

vemcmd show opflex 2174

vemcmd show packets 2175

vemcmd show pc 2176

vemcmd show pd-port 2177

vemcmd show port 2178

vemcmd show portmac 2179

vemcmd show proxy-arp 2180

vemcmd show sod 2181

vemcmd show span 2182

vemcmd show stats cookie 2183

vemcmd show useg all 2184

vemcmd show useg tables brief 2185

vemcmd show useg tables info 2186

vemcmd show useg unresolved 2187

vemcmd show version 2188

vemcmd show vlan 2189

vemsend 2190

version 2191

vlan-domain 2193

vlan-pool 2198

vlan-range 2199

vlan 2200

vmware-domain 2202

vnic 2204

vpc context 2205

vpc domain consecutive 2206

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)lii

Contents

vpc domain explicit 2207

vpc domain reciprocal 2208

vrf-blacklist-mode 2209

vrf 2210

vsan-domain 2219

vsan 2222

vxlan 2223

C H A P T E R 2 3 WCommands 2225

webtoken-timeout-seconds 2226

weight 2227

where 2228

where detail 2229

whitelist-blacklist-mix 2230

winservers 2231

C H A P T E R 2 4 Z Commands 2233

zone 2234

zones 2235

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) liii

Contents

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)liv

Contents

Preface

• Audience, page lv

• Document Conventions, page lv

• Related Documentation, page lvii

• Documentation Feedback, page lvii

AudienceThis guide is intended for network and systems administrators who configure and maintain the ApplicationCentric Infrastructure fabric.

Document ConventionsCommand descriptions use the following conventions:

DescriptionConvention

Bold text indicates the commands and keywords that you enter literallyas shown.

bold

Italic text indicates arguments for which the user supplies the values.Italic

Square brackets enclose an optional element (keyword or argument).[x]

Square brackets enclosing keywords or arguments separated by a verticalbar indicate an optional choice.

[x | y]

Braces enclosing keywords or arguments separated by a vertical barindicate a required choice.

{x | y}

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) lv


Nested set of square brackets or braces indicate optional or requiredchoices within optional or required elements. Braces and a vertical barwithin square brackets indicate a required choice within an optionalelement.

[x {y | z}]

Indicates a variable for which you supply values, in context where italicscannot be used.

variable

A nonquoted set of characters. Do not use quotation marks around thestring or the string will include the quotation marks.

string

Examples use the following conventions:


Terminal sessions and information the switch displays are in screen font.screen font

Information you must enter is in boldface screen font.boldface screen font

Arguments for which you supply values are in italic screen font.italic screen font

Nonprinting characters, such as passwords, are in angle brackets.< >

Default responses to system prompts are in square brackets.[ ]

An exclamation point (!) or a pound sign (#) at the beginning of a lineof code indicates a comment line.

!, #

This document uses the following conventions:

Means reader take note. Notes contain helpful suggestions or references to material not covered in themanual.

Note

Means reader be careful. In this situation, you might do something that could result in equipment damageor loss of data.

Caution

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)lvi

PrefaceDocument Conventions

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before youwork on any equipment, be aware of the hazards involved with electrical circuitry and be familiar withstandard practices for preventing accidents. Use the statement number provided at the end of each warningto locate its translation in the translated safety warnings that accompanied this device.

SAVE THESE INSTRUCTIONS

Warning

Related DocumentationCisco Application Centric Infrastructure (ACI) Documentation

The ACI documentation is available at the following URL: http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.html.

Cisco Application Centric Infrastructure (ACI) Simulator Documentation

The Cisco ACI Simulator documentation is available at http://www.cisco.com/c/en/us/support/cloud-systems-management/application-centric-infrastructure-simulator/tsd-products-support-series-home.html.

Cisco Nexus 9000 Series Switches Documentation

The Cisco Nexus 9000 Series Switches documentation is available at http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/tsd-products-support-series-home.html.

Cisco Application Virtual Switch Documentation

The Cisco Application Virtual Switch (AVS) documentation is available at http://www.cisco.com/c/en/us/support/switches/application-virtual-switch/tsd-products-support-series-home.html.

Cisco Application Centric Infrastructure (ACI) Integration with OpenStack Documentation

Cisco ACI integration with OpenStack documentation is available at http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.html.

Documentation FeedbackTo provide technical feedback on this document, or to report an error or omission, please send your commentsto [email protected]. We appreciate your feedback.

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) lvii

PrefaceRelated Documentation

http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-centric-infrastructure-simulator/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-centric-infrastructure-simulator/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/switches/application-virtual-switch/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/switches/application-virtual-switch/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlmailto:[email protected]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)lviii

PrefaceDocumentation Feedback

Using the APIC CLI

• Using the NX-OS Style CLI, page 1

Using the NX-OS Style CLI

The APIC NX-OS style CLI uses similar syntax and other conventions to the Cisco NX-OS CLI, but theAPIC operating system is not a version of Cisco NX-OS software. Do not assume that a Cisco NX-OSCLI command works with or has the same function on the APIC CLI.

Note

Abbreviating Commands

You can abbreviate commands and keywords by entering the first few characters of a command. Theabbreviation must include sufficient characters to make it unique from other commands or keywords. If youare having trouble entering a command, check the system prompt and enter the question mark (?) for a list ofavailable commands. You might be in the wrong command mode or using incorrect syntax. Commandabbreviation is shown in the following example:

apic1# show aaa authenticationDefault : localConsole : local

apic1# sh aa aDefault : localConsole : local

Command Completion

To complete a command or keyword after entering an abbreviated string, press the Tab key. The CLI completesthe command or keyword only if the partial string matches only one command or keyword.

Some commands, such as show hardware internal power-management, require the Tab key for partialcompletion and the ESC key for the remainder of the completion.

Note

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 1

Viewing Command Options

After typing a partial command, you can display the command options by typing a question mark (?), as shownin the following example:

apic1# show aaa ?authentication Show AAA Authentication informationgroups Show AAA group information

Command History

The history buffer stores the previous commands you entered. Using the Up arrow key (or typing Ctrl-P), youcan recall commands in the history buffer, beginning with the most recent command. Repeat the key sequenceto recall successively older commands. To return to more recent commands in the history buffer after recallingcommands, use the Down arrow key or type Ctrl-N).

Filtering show Command Output

You can use the vertical bar (|) with any show command and include a filter option and filtering expression.The filtering is performed by matching each output line with a regular expression. By selecting different filteroptions you can include or exclude all output that matches the expression. You can also display all outputbeginning with the line that matches the expression.

An example of filtering options with the show command is as follows:

apic1# show aaa authenticationDefault : localConsole : local

apic1# show aaa authentication | grep ConsoleConsole : localapic1#

Displaying a List of Commands and Syntax

To display a list of CLI commands and their syntax, use the show cli list command, as shown in the followingexample

apic1# show cli list[ ][mode] [None ] exec[cfg ][mode] [exec ] configure [['terminal', 't']][cfg ][mode] [configure ] power redundancy-policy [cfg ][cmd ] [power ] redundancy-mode combined|ps-redundant|redundant...

You can filter the output of this command, as shown in the following example:

apic1# show cli list | grep ntp[cfg ][mode] [pod ] ntp[cfg ][cmd ] [ntp ] authenticate[cfg ][cmd ] [ntp ] authentication-key [md5 ]...

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)2

Using the APIC CLIUsing the NX-OS Style CLI

Negating a Command with the no Prefix

Almost every configuration command has a no form that can be used to disable a feature, revert to a defaultvalue, or remove a configuration.

To disable a feature, remove a created object, or revert a configuration setting to its default value, mostconfiguration commands can be preceded with the prefix 'no'.



A Commands

• aaa authentication login console, page 7

• aaa authentication login default, page 8

• aaa authentication login domain, page 9

• aaa authentication login fallback-check, page 10

• aaa authentication login ping-check, page 11

• aaa banner, page 12

• aaa group server ldap, page 13

• aaa group server radius, page 14

• aaa group server tacacsplus, page 15

• aaa user default-role, page 16

• absolute, page 17

• access-encap, page 18

• access-group, page 19

• access-list, page 20

• account-status, page 21

• action, page 22

• active-flow-timeout, page 23

• address-family, page 24

• address-pool-ref, page 28

• address-pool, page 29

• address-range, page 30

• address, page 31

• admin-state-enable, page 32

• admin, page 34


• advertise-subnet, page 35

• aggregate-address, page 36

• allow-credential, page 37

• allow-origin, page 38

• allow-promiscuous, page 39

• allow-self-as, page 40

• allow-writes, page 41

• allowed-self-as-count, page 42

• analytics, page 43

• application, page 44

• area default-cost, page 45

• area interpod, page 46

• area l3out, page 47

• area loopback, page 48

• area nssa, page 49

• area nssa default-information-originate, page 50

• area nssa no-redistribute, page 51

• area nssa translate, page 52

• area range, page 53

• area route-map, page 54

• area stub, page 55

• arp flooding, page 56

• asn, page 57

• attach-avs, page 58

• attribute-logical-expression, page 59

• attribute, page 60

• authenticate, page 61

• authentication-key-timeout, page 62

• authentication-key, page 64

• authentication, page 67

• auto-cost, page 70

• auto-route-target, page 71

• autonomous-system, page 72


A Commands

aaa authentication login consoleaaa authentication login console

Description: Configure console methods

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']](config)# aaa authentication login console


A Commandsaaa authentication login console

aaa authentication login defaultaaa authentication login default

Description: Configure default methods


Command Path:

# configure [['terminal', 't']](config)# aaa authentication login default


A Commandsaaa authentication login default

aaa authentication login domainaaa authentication login domain

Description: Configure domain methods

Syntax:

Login domain nameWORD


Command Path:

# configure [['terminal', 't']](config)# aaa authentication login domain


A Commandsaaa authentication login domain

aaa authentication login fallback-checkaaa authentication login fallback-check

Description: checks if default auth servers are active or not before allowing fallback login


Command Path:

# configure [['terminal', 't']](config)# aaa authentication login fallback-check


A Commandsaaa authentication login fallback-check

aaa authentication login ping-checkaaa authentication login ping-check

Description: Enables ICMP health check of AAA servers


Command Path:

# configure [['terminal', 't']](config)# aaa authentication login ping-check


A Commandsaaa authentication login ping-check

aaa banneraaa banner

Description: CLI informational banner to be displayed before user login (wrap with single quotes)

Syntax:

CLI informational banner to be displayed before user login (wrap withsingle quotes) (Max Size None)

LINE


Command Path:

# configure [['terminal', 't']](config)# aaa banner


A Commandsaaa banner

aaa group server ldapaaa group server ldap

Description: LDAP server group name.

Syntax:

LDAP server group nameWORD


Command Path:

# configure [['terminal', 't']](config)# aaa group server ldap


A Commandsaaa group server ldap

aaa group server radiusaaa group server radius

Description: RADIUS server group name.

Syntax:

RADIUS server group nameWORD


Command Path:

# configure [['terminal', 't']](config)# aaa group server radius


A Commandsaaa group server radius

aaa group server tacacsplusaaa group server tacacsplus

Description: TACACS+ server group name.

Syntax:

TACACS+ server group nameWORD


Command Path:

# configure [['terminal', 't']](config)# aaa group server tacacsplus


A Commandsaaa group server tacacsplus

aaa user default-roleaaa user default-role

Description: Default role assigned by aaa-admin for remote authentication

Syntax:


Command Path:

# configure [['terminal', 't']](config)# aaa user default-role


A Commandsaaa user default-role

absoluteabsolute window

Description: Absolute window configuration mode

Syntax:

Configure scheduler windowwindow

Window name (Max size 31)WORD

Command Mode: scheduler : Scheduler configuration mode

Command Path:

# configure [['terminal', 't']](config)# scheduler fabric|controller schedule (config-scheduler)# absolute window


A Commandsabsolute

access-encapaccess-encap vlan

Description: set the access-vlan for the qinq tunnel

Syntax:

Encapsulation Vlanvlan

Encapsulation Vlan. Number range from=1 to=4094

Command Mode: dot1q-tunnel : Tunnel configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant (config-tenant)# dot1q-tunnel (config-tenant-tunnel)#access-encap vlan


A Commandsaccess-encap

access-groupaccess-group

Documents

Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) · Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) First Published: 2017-06-07 Americas Headquarters Cisco