Cisco Prime Infrastructure 3 - Cisco - Global Home Page Prime Infrastructure 3.0 ... Managemen PfR Monitoring AVC for Flex UCS-C, UCS-E ... Higher priced NW equipment such as !

Cisco Prime Infrastructure 3.0 Søren Dulong Andreasen

FORVENTET FCS I slutningen af August, start September, afhænger af det igangværende betaforløb

PI-DK mail liste, nyheder, tips og trick etc (1-2 mails om måneden), skriv til [email protected] hvis du vil være med ;-)

Cisco Confidential 2 © 2013-2014 Cisco and/or its affiliates. All rights reserved.

Prime Infrastructure - UCS-Based Physical Appliance (Gen 2)

Generation 1 PRIME-NCS-APL-K9

2.4 GHz, Intel E5620

Generation 2 PI-UCS-APL-K9

UCSC-C220-M4S 2.30 GHz E5-2650

v3/105 W 10C/25 MB Cache/DDR4 2133 MHz

CPU

MEM

HDD

1 RU, dual power supply, hot-swappable HDD

EoS/EoL May 2015

PI 2.2 or lower Niihau Maint Rel.

1 RU, dual power supply, hot-swappable HDD

8 cores

16 GB

4 x 300 GB

RAID 5

ISO Image Available Today

10 cores

64 GB

4 x 900 GB

RAID 10 RAID

ISO Image Available Today

Gen1 Appliance Scale

Gen 2Appliance Scale

5000 Max unified Aps 10,000 3000 Max autonomous APs 3000 500 Max WLAN controllers 1000

6000 Max wired (switches, routers) 13,000 10 Max MSE 25

500 NAMs 1000 10,000 Max number of devices

(Combination of wired, wireless)

20,000

FCS April 3, 2015

Downloadable ISO Image, Install

Guide Supports PI 2.2 or

higher


Prime Infrastructure 3.0 (2015)

CUWN - 8.1 – ATE, MS Lync

Wireless Wired Datacenter Platform

Alarm Flexibility

Modern User Interface

UCS Service Profiles

Configuration Compliance

Nexus - Overlay

Complete IWAN support with APIC

EM Integration

Rogue Management PfR Monitoring

AVC for Flex UCS-C, UCS-E Performance

Multi-NAM /vNAM deployment

Client Troubleshooting

Out of box Port Monitoring

Switching Workflows


§  Composite Reports

§  In-line upgrade from PI 2.2 to PI 3.0

§  Alarm customization (Tech pack 1-2 months after FCS)

§  EoL/EoS/PSIRT reports are back

Platform Enhancements

§  Gen 1 Appliance supported with PI 3.0 – MR1 release

§  Background task optimized §  No more dependency between tasks §  Tasks run at scheduled intervals


Access Point Support – Device Pack

New AP Support via Device Pack

AP support at existing feature parity of WLC

release

Simple download

available via in-product update



§  AP 1850

§  Hyperlocation module with advanced security (MSE 8.x integration)

§  Hyperlocation antenna (configuration and monitoring – no MSE integration)*

§  Gladiator

§  Orstead

*MSE 10.x integration with PI Lanai Release

Wireless Platforms


Client Troubleshooting Enhanced Easy client status

visualization

Status of client statistics

Easy to get to next steps


§  Quickly identify client infrastructure connectivity issues

§  Easy navigation to detailed troubleshooting

§  Switch between DB mode and real-time mode

§  Visualize RSSI/SNR via color coding

Client Troubleshooting Enhanced


§  Bulk Update of Rogue Alarms

§  Sorting/Filtering/Searching of all of the columns in the rogue alarms

§  Automated update of OUI signatures from IEEE website

§  Auto Switch port tracing enhancements

Rogue Management Simplified


§  Integration with MS Lync SDN Server

§  Configuration §  Lync policy §  Lync profiles

§  Monitoring §  Site to site traffic §  Wired vs Wireless §  User specific metrics and

troubleshooting

MS Lync Troubleshooting For Wireless deployments


§  View Primary and Secondary controllers

§  Performance statistics of both controllers

§  Events/Alarms for HA controller failure and alarm generation

§  HA status summary in primary and secondary controllers in DWC

HA monitoring for WLC


§  Redundant guest anchor

§  Channel Utilization breakdown per AP

§  ATF Monitoring

§  AVC on flex – configuration and monitoring

§  VLAN support/Native VLAN for Flex-connect

§  WiFi interference awareness (configuration)

Other Capabilities


Performance Graphs Correlated Charts – Comparative Troubleshooting

Alarms Config

Changes


§  Mobility Express §  Mingle-Lite

§  Bulk Update AP/Refresh AP §  RMA AP with same AP model §  Refresh infrastructure with new upgraded AP eg Migrate from 1700 to 1850 §  Preserves the map location §  Association to controller and AP group/flex connect group (reboot of AP

required)

Prime Infrastructure 3.0 – MR1


© 2013 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16

Licensing, Pricing and Support Update

Cisco Enterprise Management 3.x Enabling Market Transformation to SDN Led Management


Cisco ENT MGMT 3.x

APIC-EM License ($0) •  Controller and Foundation Apps

(PnP, Inventory, Topology etc) •  APIC-EM Physical Appliance ($$)

(Optional)

One Cisco Enterprise MGMT 3.x Dev Lic ($)

•  Prime Infra (LF, AS) •  APIC-EM Solution Apps (e.g

IWAN App, others)

Others (Optional) ($) •  UCS Physical Appliance (PI 3.0

and / or APIC EM Controller) •  UCS Server and VM Management

License •  Advanced Apps ($$) (e.g Prime

Insight, Branch Services Automation (BSA), etc)

Cisco SDN MGMT Solution for the Enterprise


When customers purchase Cisco ENT MGMT 3.x License, they get •  Prime Infra (LF, AS) device license •  License to use APIC-EM solution Apps

•  e.g. IWAN App, others

(Optionally) customers can purchase: •  PI 3.x License for managing UCS Server and VMs ($$) •  Gen2 Prime Infra Physical Appliance* ($$) , APIC-EM Physical Appliance ($$) •  Advanced Apps ($$)

•  e.g. Prime Insight, BSA, etc ..

Cisco ENT MGMT 3.x Prime Infrastructure 3.0 and APIC EM Solution Apps (e.g IWAN App)

*Gen1 Prime Infrastructure Appliance (PRIME-NCS-APL-K9) is EoS as of May 2015; Support is continued per EoS / EoL Schedule; Prime Infra 3.x will be supported on Gen1 Appliance within a few months of PI 3.0 FCS


Cisco Enterprise Management 3.x Support and Services Contract (1 of 2) SW and Licensing Support via SWSS

§  Includes PI 3.x, APIC-EM Solution Apps

HW support via SMARTNET

§  Prime Infra Appliance §  APIC-EM Appliance

For customers running APIC-EM (Controller and Foundation Apps) only •  APIC EM Controller and Foundation Apps support will be via devNet ($0)

•  If applicable, TAC Support for Physical Appliance will be via SmartNet ($$)


APIC-EM (Foundation Apps), Solution Apps

Ordering Use-cases -  New Purchases

-  Upgrades from NCS, PI (w/ and w/o Serv. Contract) -  Upgrading from WCS, LMS

Some Key Facts


Cisco Enterprise MGMT 3.x Licensing Workflow (1 of 3) Use Case: Greenfield, or Adding Capacity

4 1 2 3

Take NW Inventory Decide on Deployment Order / Purch Lic (Reqd) Download Software # Unified APs - VM vs PHY - Base license(s) - PI 3.x # Switches (Cat) -  # of PI Servers

-  HA - Software (version) - APIC- EM Controller (Opt)

- 2K, 3K - Device Licenses - 4K, 6K # Switches (Nexus) Order / Purch Phy Appl (Opt) Install SW * - 3K, 4K .. - PHY Server(s) (if app) - PI 3.x (PHY / VM) # Routers - APIC- EM (PHY) - Optional -ISR 1K, 2K .. - ASR 1K, .. Decide on License Type*** Order / Purch Lic (Opt) Install License** # UCS Servers - Smart - H/A License (if app) - PI 3.x (Trad Lic Only) - Running Bare metal - Traditional - Oper Center (if app) - Running VMs

* Gen 2 Phy Appl ships w/ SW * PI 3.x will accept both Node locked and Node lock removed licenses; ** APIC-EM uses RTU, so No .Lic File *** Cisco ONE Licenses are used when purchasing Cisco ONE bundles, Hence not applicable


Cisco Enterprise MGMT 3.x Licensing Workflow (2 of 3) (With Valid Support Contract on PI 1.x / 2.x) Upgrading from PI 1.x / 2.x to MGMT 3.x

1 2 Moving from VM to PHY Appl ?

Download Software

If yes, - PI 3.x Order Phys Appliance(s) - APIC- EM Controller (Opt) Upgrade / Install SW * - PI 3.x (PHY / VM) - APIC- EM (PHY) - Optional Decide on Deployment Install License** - VM vs PHY - PI 3.x (Trad Lic Only)*** - # of PI Servers * Gen 2 Phy Appliance ships w/ SW * MGMT 3.x will accept both Node locked and Node lock removed licenses; NO REHOST REQUIRED ** APIC-EM uses RTU, so No .Lic File

*** Additional lic need to be added only for additional devices/features


Cisco Enterprise MGMT 3.x Licensing Workflow (3 of 3) (Without Valid Support Contract on PI 1.x / 2.x) Upgrading from Legacy to MGMT 3.x

1 2 3 Moving from VM to PHY Appl ?

Order / Purch Upgrade Lic (Reqd)

Download Software

If yes, - Base license(s) - PI 3.x Order Phys Appliance(s) - Software (version) - APIC- EM Controller (Opt) - Device Licenses Order / Purch Phy Appl

(Opt) Upgrade / Install SW *

- PHY Server(s) (if app) - PI 3.x (PHY / VM) - APIC- EM (PHY) - Optional Decide on Deployment Order / Purch Upg Lic (Opt) Install License** - VM vs PHY - H/A License (if app) - PI 3.x (Trad Lic Only) - # of PI Servers - Oper Center (if app)

* Phy Appl ships w/ SW * MGMT 3.x will accept both Node locked and Node lock removed licenses ** APIC-EM uses RTU, so No .Lic File


§  Cisco ENT MGMT 3.x will be aligning with Cisco ONE §  PI 3.x Licenses will be orderable in increment of one unit device license

(No more packs of 25, 50 ..etc)

§  PI 3.x Licenses are now linked to category / sub-category of network devices §  e.g., L-MGMT3x-LFAS-AP, L-MGMT3x-LFAS-3K , etc.

§  PI 3.x licenses will combine Lifecycle (LF) and Assurance (AS) License into one* §  This will ensure richer management (Monitoring / Troubleshooting) experience, and

end to end application level visibility

Cisco Enterprise Management 3.x (some key facts)

* When customers upgrade from PI 2.x to MGMT 3.x / PI 3.x, customers are not required to but strongly encouraged to add AS licenses for existing devices.


Category 1 (90 – 95% NW Devices fall into this category) §  Wireless APs (all models), Cat 2K, 3Ks, ISR 1K §  The licenses will be priced at $105 / Device*

§  E.g., L-MGMT3X-AP, L-MGMT3x-2K Category 2 (5 – 10% NW Devices fall into this category): §  Higher priced NW equipment such as

§  Cat 4K, 6K and Nexus Switches, Switch stacks, Groups of Instant access switches, Fabric Extenders §  The licenses will be priced at “N” X $105 / Device*

§  Each device license translates to “N” LF Token and “N” AS Token §  E.g., N = 2 for L-MGMT3X-4K; N = 3 for L-MGMT3x-6K



§  Customers purchasing MGMT 3.x licenses for existing devices §  Need to take an approximate* inventory of device across categories / sub

categories of network devices (APs, Switches, Routers) and UCS servers §  Purchase Cisco MGMT 3.x device licenses as per the inventory taken above

§  Customers purchasing new Cisco H/W (APs, Switches, Routers, UCS Servers) §  Are strongly encouraged to purchase matching management licenses (# and

type) along with network device purchases (Similar to Cisco ONE)

Cisco Management 3.x (some key facts)


§  Customers upgrading from Legacy (PI 1.x / 2.x) with no devices to add §  PI 3.x will allow customers to use their Legacy licenses with no negative

impact §  LF à LF; LF+AS à LF+AS §  Customers are not required to but encouraged to add AS licenses

§  PI 3.x will create grandfathered licenses for Category 2 devices (as previously explained) and switch stacks (2K, 3K)

Cisco Management 3.x (some key facts)


§  MGMT 3.x solution will be available for purchase via: §  Ala carte’ purchases (Both Smart and Traditional) §  Cisco ONE Bundles purchases

§  Cisco ONE SKUs are available for purchase within Cisco ONE Bundles and not applicable for traditional purchases


Thank you.

Documents

Cisco Prime Infrastructure 3 - Cisco - Global Home Page Prime Infrastructure 3.0 ... Managemen PfR Monitoring AVC for Flex UCS-C, UCS-E ... Higher priced NW equipment such as !