Embed Size (px)
Citation preview
Application Note
Mapping of Basic Cisco IOS CLI and System Management Commands to JUNOS Internet Software Commands
Juniper Networks, Inc.1194 North Mathilda AvenueSunnyvale, CA 94089 USA408 745 2000 or 888 JUNIPERwww.juniper.net
Part Number : 350023-001 07/02
Siew NgNetwork Support Engineer
Mapping of Basic Cisco IOS CLI and System Management Commands to JUNOS Internet Software Commands
PurposeThis note provides a mapping between basic Cisco CLI and system management commands and the equivalent JUNOS Internet software commands. The purpose of this mapping is to assist network professionals who are familiar with Cisco IOS commands in learning the JUNOS Internet software. This note also serves as a command quick reference.
Category IOS Command JUNOS Internet Software Command
Basic CLI and Systems Management Commands
clock set set date
ping ping
reload request system reboot
send request message
show clock show system uptime
show environment show chassis environment
show history show cli history
show ip traffic show system statistics
show logging show logshow log file name
Show processes show system processes
show running config show configuration
show tech-support request support information
show users show system users
show version show versionshow chassis hardware
terminal length set cli screen-length
terminal width set cli screen-width
trace traceroute
Interface Commands clear counters clear interface statistics
show interfaces show interfacesshow interfaces detailshow interfaces extensive
show ip interface show interfacesshow interfaces detailshow interfaces extensive
show ip interface brief show interfaces terse
Routing Protocol-Independent Commands
clear arp-cache clear arp
show arp show arp
show ip route show route
show ip route summary show route summary
show route-map show policyshow policy policy-name
2 Copyright © 2002, Juniper Networks, Inc.
Mapping of Basic Cisco IOS CLI and System Management Commands to JUNOS Internet Software Commands
ReferencesJUNOS Internet Software Configuration Guide Release 5.3 Cisco IOS Release 12.0 Configuration Guides and Command References
Category IOS Command JUNOS Internet Software Command
show tcp show system connections
OSPF Commands show ip ospf database show ospf database
show ip ospf interface show ospf interface
show ip ospf neighbor show ospf neighbor
IS-IS Commands clear clns neighbors clear isis adjacency
clear isis * clear isis database
show clns neighbor show isis adjacency
show isis database show isis database
show isis routeshow isis topology
show isis routes
Show isis spf-log Show isis spf log
BGP Commands clear ip bgp clear bgp neighbor
clear ip bgp dampening clear bgp damping
show ip bgp show route protocol bgp
show ip bgp community show route community
show ip bgp dampened paths
show route damping decayed
show ip bgp neighbors show bgp neighbor
show ip bgp neighbors address advertised-routes
show route advertising-protocol bgp address
show ip bgp neighbors address received-routes
show route receive-protocol bgp address
show ip bgp peer-group show bgp group
show ip bgp regexp show route aspath-regex
show ip bgp summary show bgp summary
Copyright © 2002, Juniper Networks, Inc. All rights reserved. Juniper Networks is registered in the U.S. Patent and Trademark Office and in other countries as a trademark of Juniper Networks, Inc. Broadband Cable Processor, G10, Internet Processor, JUNOS, JUNOScript, M5, M10, M20, M40, M40e, M160, M-series, ServiceGuard, T640, and T-series are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners. All specifications are subject to change without notice.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Copyright © 2002, Juniper Networks, Inc. 3
