Embed Size (px)
Citation preview
Since 2016: 9 Sponsors
200 Project validated over 9
years
Successful rate 41%
Total financing of
40,7 million euros
114 achieved
63 ongoing projects
23 cancelledSupported by
Key figures over 9 calls
2008-2016
Eligibility• The proposal must answer the sponsors needs,
• The coordinator must be a French company, preferably a SME, no constraint on the partners,
• Maximum duration 18 months, maximum operated budget 800 000 euros.
Financing rulesFunding covers 50% of the total budgeted expenses; It is not reimbursable but subject to counterparts for
sponsors (Collaborative contract).
Advices• Mean operated budget around 400 000 euros,
• For higher operated budget propose a phasing over two calls,
• The proposal is very simple, as some sponsors experts are not French, it is better to fill in it in English.
CITEPH rules
sponsoring
companies
research
priorities and
expectations
presentation
Financing decisions
Project’s Evaluation
Commission
Committee Board
JanuaryJune July October
Expert groups
Second Step
Project
presentation
Third Step
January -> April
Project form
First Step
May
10th Projects call
opening
Exchange with
the sponsors to
find a match
between their
needs and the
proposal.
Submission of
the Proposal
Projects
evaluationProjects
evaluation &
selection
CITEPH program Steps
Call answer
� Accessibility to new explored zones:• Deep buried reservoirs with extreme
conditions HP HT
• Arctic zone
• Unconventional resources…
� EOR (Enhanced Oil recovery):Matures fields
� Heavy oil
� Ultra deep water:• Compression, injection, separation
• Flow assurance
• Gas lift
� New equipment: Insulation, corrosion HP/HT, transport, Inspection, O&M
� Natural gas: Offshore GNL, production, transport and storage
� Real time visualization
� Seismic survey
� HSE
� Microfluidics
Main technical areas
SPONSORS
• Direct support to SME and
innovative companies
• Faster access to developed
technologies
PROJECT LEADERS
• Financial support of the R&D
(50%)
• Direct application and
implementation of the results
by the sponsors
Forum of exchanges and shared vision of the technologies evolutionSharing of the financial risks of the research - Collaborative work
Advantage of the Credit Tax associated to Research investment CIR
Expected profits
180 attendees representing 115 companies
Sponsors
Companies
SME
Universities, Pôles de
compétitivité
Research institute :
IFPEN, IFREMER
Technological
centers: CETIM,
INNOCOLD Exchange
day
10tH CITEPH call
January 19th, 2016
Sponsors needs regrouped by thematics:
Cost reduction
• Cashing white drilling
• Flexidrilling
• Smart mud injection and management
• monitoring
Well integrity management / Asset integrity management
Drilling and completion
Automatic sampling system
Smart tracer and new monitoring techniques
Data acquisition (Large volume of data to transfer, drone)
Metrological check and 3D mapping by lasergrammetry for deep
offshore applications
Geophysics acquisition in surf zone
Induced seismicity
Geotechnics, geology, geophysics, oceanometeo
Underground storage (salt, horizontal cavity..)
Progress on integration and interpretation tool to reduce uncertainties
and provide fit for purpose data right on time
Reservoir modeling tool for reliable predictions & optimized development
plan (non-structured grids)
Geotechnics modeling, decision tools
2G&R interpretation: Innovative tools & functionalities to speed up and
bring robustness to the evaluation processes
Geotechnics, geology, geophysics, oceanometeo
Next generation of workstations (innovative HMI, touch screen technology) +
collaborative work
Innovation of IT: collaborative systems, HPC, Data access&QC
Monitoring of the currents and waves in the water column in quasi real time
conditions without considering the anchor systems
Operational tool type early warning system for the solitons
Prediction tool for inundations
Geotechnics, geology, geophysics, oceanometeo
Safety enhancement All
Economical tools for environmental monitoring (subsea, on the floor, in
the aquifers)
Early detection of errors or disorders (acoustic systems, networks)
Water treatment
• Innovative solutions
• nanomaterials for desalination, separation
Development of bio-sensors to be installed on production installations to
monitor production waters
Noise impact in subsea (measurement, reduction)
HSE
Alternate solutions to biocide treatments with low environmental impact
Dredging and landing sediment removal management
Efficient solutions for GHG emission reductions
Augmented reality: Development of glasses resistant in explosive conditions
(ATEX)
Effluent, waste treatment and valorization
Valorization of gas at the beginning of production of end-of-life of a field
Efficient process for producing clean energy from hydrocarbons
HSE
Automation, robotics offshore, mechatronics, cobotics
• AUV, ROV, gliders
• autonomous system; data acquisition/communication; energy
harvesting
• maintenance and inspection
Underwater communication network
Material (alloys, welding, elastomer, composite, polymer…) behavior in
extreme conditions
• high pressure and temperature gradient: rheology stability (0-150°C)
• reliable plastic (isolation) upto 200°C
• high Strength Steels, composites, strength/weight ratio
• insulation materials (dry or wet, non-metallic)
• Artic zone; corrosive environment
• biofouling
• lifetime
• gas treatment: absorption, adsorption, membrane, catalytic systems
• buoyancy
New materials, equipment, monitoring, data
Minimization of cost
• weight reduction of material, equipment
• monitoring (fatigue, fluid quality, use of nanotechnologies for surface
installations and pipes)
• coatings, pipe cladding
Reliability of subsea
• power generation, transmission, distribution
• connectors
• leak detection, monitoring
• active heating
High temperature electronics
• Active and passive components for T>200°C
• ASICs and MCMs developments
New materials, equipment, monitoring, data
Data processing
• Acquisition � Merging � HMI � Modeling
• Storage/management � Statistics
• Multiphysics inversion
• Algorithms: anisotropy tonsorial analysis, distributed computing, predictive
• Real time measurement � Real3D
• Augmented reality: Image identification in a complex industrial zone (e.g.
piping network)
Non destructive testing, non intrusive measurements
Microbial corrosion sensors with quick response time
Easy/ quick titration methods of corrosion inhibitor residuals in produced
waters (for site application , i.e. with minimal preparation and equipment)
New materials, equipment, monitoring, data
Simulation, modeling (fluid, structure, mooring, fatigue, thermal, FEA,
automatic creation of a 3D model of a complex installation)
LNG: spill prevention, protection materials, processing, transfer, floating
technology (FLNG)
New gas processes: motion insensitive processes, compact processes,
technologies for cold systems, new architecture (Coupled & integrated
processes Modular & flexible systems)
Gas valorization solutions for stranded or associated gas
Energy storage
• subsea backup power supply
• performance including reliability
• automated maintenance without human intervention
• modular architecture
On&offshore construction engineering
Energy efficient solutions for O&G production processes
Reducing conservatism in Design codes (DnV, API…)
Cost effective solutions
• field abandonment, reuse / abandonment of existing platform
• increase production of mature field (gas lift, EOR, monitoring..)
• prevent formation of scale, wax
• thermal insulation
• low energy reliable sensors
• modular equipment
• dispersed resources and ultra deep reservoirs with new architecture
concepts and ground breaking subsea processing technologies
• new inspection, monitoring, maintenance and repair subsea technologies
• gas treatment & valorization processes for acid gas assets (compactness,
flexibility) compliant with stringent regulation
On&offshore construction engineering
Particular subjects
• Welding, steel / concrete interface
• Large diameter, low pressure pipes
• Heat exchangers
• Sour gas processing
• Regasification units
• Compact separation
• Riser concept
• Heavy crude oil processing
• Sand handling
• Deepwater buoyancy
• Goods handling (on/offshore)
• High and reliable clamps capacity
• Fast and easy Scaffoldings
• Operability improvement
• Innovative Factories and production lines equipment (ex. Cobotics…)
• Nanomaterials for wear-proof, (self)-repair, frost-proof, corrosion-proof,
adherence, lightening and reinforcing structures
On&offshore construction engineering
www.citeph.fr
Thanks for your attention
Download R&D needs on
