CL5/CL3/CL1 V1.7 Supplementary Manual · 2019-07-10 · EN V1.7 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1

EN

V1.7 Supplementary ManualThis supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1 firmware V1.6 and V1.7.Use it in conjunction with the CL5/CL3/CL1 Owner’s Manual and Reference Manual.

Contents

V1.7 Supplementary Manual2

Contents

SELECTED CHANNEL section ...................................................... 3Improved gain indication......................................................................................... 3Improved HPF indication ......................................................................................... 4

Centralogic section ................................................................... 4Improved DCA group indication .............................................................................. 4

Input channels .......................................................................... 5Additional head amp setting functions when changing the input patching.............. 5

Grouping and linking ............................................................... 7Improved display of DCA group / MUTE group names............................................. 7Added functions for DCA groups ............................................................................. 8Improvements in channel link display ...................................................................... 9

Monitor and Cue ..................................................................... 10Extended cue functions ......................................................................................... 10

Meters ..................................................................................... 10Added functions for meter display ......................................................................... 10

Graphic EQ, Effects, and Premium Rack ................................. 11Improvements in popup window operation ........................................................... 11Improved display for tap tempo function............................................................... 11

I/O device and external head amp ......................................... 12Added display functions for device status............................................................... 12Improvements in I/O device settings...................................................................... 14

User settings............................................................................ 15Added functions for the GAIN/PAN/ASSIGN knobs (assignable encoders)............... 15Added custom fader bank functions ....................................................................... 15Added load/save functions ..................................................................................... 18Added function for recovering from USB overcurrent.............................................. 21

Other functions ....................................................................... 22Improvements to the channel name display ........................................................... 22Added channel color .............................................................................................. 22Added GPI functions............................................................................................... 23Initializing the Dante audio network settings .......................................................... 23Block Diagram........................................................................................................ 24

SELECTED CHANNEL section

V1.7 Supplementary Manual

e GAIN knob, the analog gain value is shown here.

n if an input without a head amp

3

SELECTED CHANNEL section

Improved gain indicationIn the GAIN/PATCH field of the SELECTED CHANNEL VIEW screen, the analog gain and digital gain of the head amp are both shown at all times.

■ A.GAIN indication

• Gain valueIf analog gain is assigned to the GAIN knob, the digital gain value is shown here.

The GAIN knob, +48V indicator, and HPF ON indicator are not shown if an input without a head amp is patched to the input channel.

■ D.GAIN indication

• Gain valueIf digital gain is assigned to th

The analog gain value is not showis patched to the input channel.

GAIN knob

OVER indicatorØ (Phase) indicator

+48V indicator

HPF ON indicator

Gain value

Centralogic section


ction

up indication in the DCA member indication of the OVERVIEW screen, you s of the Centralogic section to scroll the channels.

4

Improved HPF indicationThe HPF status of an external head amp such as the R-series is now shown in the GAIN/PATCH field of the SELECTED CHANNEL VIEW screen.

• HPF ON indicatorIndicates the HPF on/off status of the external head amp.

The HPF/EQ popup screen now shows an HPF ON indicator and the cutoff frequency.

1 HA HPF ON indicatorIndicates the HPF on/off status of the external head amp.

2 FREQUENCYIndicates the HPF cutoff frequency of the external head amp.

Centralogic se

Improved DCA groIf 15 or more channels are registeredcan now use the multifunction knob

1

2

Input channels


CT popup window

press the GAIN/PATCH field to access the GAIN/PATCH

r INPUT PORT button) to access the PORT SELECT popup

NFO field to specify whether the HA settings of the port hannel will take priority.

ll take priority. Even if you change the patching, the HA settings of d.

ttonl will take priority. The HA settings of the port that had been ied to the newly-patched port.

l appear when you switch buttons.ched to the input channel, the dialog box is not shown.

1 2

5

Input channels

Additional head amp setting functions when changing the input patchingWhen you change the input patching, you can now choose whether the HA (Head Amp) settings of the port you patched will be used, or whether the HA settings of the channel will be copied to the port you patched.Make this selection in the PORT SELECT popup window and the PATCH/NAME popup window.

NOTE

You can also choose whether the HA settings from CL Editor will be used without change or copied from the channel. For details, refer to the CL Editor Owner’s Manual.

■ Settings in the PORT SELE

1. In the OVERVIEW screen, popup window.

2. Press the PATCH button (owindow.

3. Press a button in the HA Ior the HA settings of the c

1 TAKE FROM PORT buttonThe HA settings of the port withe port will remain unchange

2 TAKE FROM CHANNEL buThe HA settings of the channepreviously patched will be cop

A confirmation dialog box wilIf an input without a HA is pat

Input channels

6
If the channel’s HA settings are selected, the following HA settings will be copied from the channel to the port that is patched. If you patch the input channel from an input that does not have these settings (i.e., that does not have a HA), the default values will be specified.

NOTEIf you’re newly patching a previously-unpatched input channel, the default values will be specified if the HA INFO field’s TAKE FROM CHANNEL button is pressed.

■ Settings in the PATCH/NAME popup window

1. In the OVERVIEW screen, press a channel number / channel name field to access the GAIN/PATCH popup window.

2. Make settings in the same way as in the PORT SELECT popup window.

HA setting Default value

HA gain amount –6 dB

HPF on/off Off

Phantom power on/off Off

Gain compensation on/off Off

Grouping and linking


on to access the NAME screen.ear, allowing you to enter or edit the text.

own on the DCA group select button.

7


Improved display of DCA group / MUTE group namesIn the DCA/MUTE GROUP ASSIGN MODE popup window, the DCA group names and mute group names can now be displayed.

■ Editing and displaying DCA group names

1. In the Function Access Area, press the CH JOB button.

2. Press the DCA GROUP button to access the DCA/MUTE GROUP ASSIGN MODE popup window.

1 NAME EDIT buttonEdits the group name of the currently selected DCA group.

3. Press the NAME EDIT buttThe keyboard window will app

4. The DCA group name is sh1



or DCA groupss whose send point is set to PRE can now be assigned to be muted

as POST only.

as PRE and POST.hown below a DCA group that has this setting.

up can be specified individually for each DCP group.re than one DCA group, muting any of the DCA groups will mute sends to the corresponding buses).

1 2

8

■ Editing and displaying mute group namesMute group names can be specified in the same way as for DCA groups.

1 NAME EDIT buttonEdits the group name of the currently selected MUTE group.

The registered group name is shown in the RECALL SAFE MODE popup window, the GLOBAL RECALL SAFE popup window, and the GLOBAL PASTE window’s PATCH/NAME tab.

Added functions fSends from an input channel to a buby a DCA group.

1 POST ONLY buttonSpecifies the object of muting

2 PRE & POST buttonSpecifies the object of muting The PRE&POST indicator is s

The object of muting for a DCA groFor channels that are assigned to mothat channel’s signal path (including

1


9
Improvements in channel link displayA link indicator has been added to the CH LINK MODE popup window, making it easier to determine the currently-assigned link group.

■ Accessing the CH LINK MODE popup window

1. In the Function Access Area, press the CH JOB button.

2. Press the CH LINK button to open the CH LINK MODE popup window.

3. Use the [SEL] keys or the channel display field to select the channels that you want to link; the link indicator will show the link group.

If a channel belonging to a link group is selected, the associated link group is shown. The LINK PARAMETER field and SEND PARAMETER field show the link settings.While you hold down the [SEL] key of a channel that does not belong to any link group, the link indicator shows the link group that will be created next. The LINK PARAMETER field and SEND PARAMETER field show the settings of the link group that had been previously displayed.

Channel display fieldLink indicator

Monitor and Cue


or meter displayL GAIN METER have been added to the METERING POINT

ion, the name of PRE HPF has been changed to PRE D.GAIN.

evel will be detected.

...... Immediately before GAIN COMPENSATION

...... Immediately after DIGITAL GAIN

10

Monitor and Cue

Extended cue functionsThe cue monitor level range has been expanded to –30 dB – +20 dB.

Make this setting in the CUE popup window.

■ Accessing the CUE popup window

1. In the Function Access Area, press the MONITOR button to access the MONITOR screen.

2. Press the CUE popup display button.

Use the knob to adjust the monitor level in the range of –30 dB – +20 dB.

Meters

Added functions fPRE GC METER and POST DIGITAfield of the METER screen. In addit

Select the meter point at which the l

■ For INPUT METER• PRE GC .................................• POST D.GAIN .....................

Graphic EQ, Effects, and Premium Rack


ects, and Premium Rack

opup window operation popup window, and PREMIUM RACK popup window, you can

annels.

sing a top panel [SEL] key while editing an effect parameter will inserted in that channel. The same will occur in the GEQ popup popup window. You can also switch from the EFFECT popup or the PREMIUM RACK popup window.onjunction with the channel being operated.in the Function Access Areahe synchronized CL Editor

in the channel to which you switched, a dialog box informing you

for tap tempo function defined key, and you are specifying the BPM (tempo value) by ike the following will now appear.

ppear if the EFFECT EDIT popup window in which you’re specifying

11

Graphic EQ, Eff

Improvements in pIn the EFFECT popup window, GEQnow use the [SEL] keys to switch ch

In the EFFECT popup window, presswitch the screen to the effect that iswindow and the PREMIUM RACK window to the GEQ popup windowThe following items will change in c

• Selected channel indication • Channel being operated in t

If no insert settings have been madeof this will appear.

Improved display If TAP TEMPO is assigned to a userpressing that key, a popup window l

■ Tap tempo popup window

NOTEThis popup window will not atap tempo is open.

ATT

KeyinSelf PRE EQ

Self POST EQMIX21-24 OUT

CH[1-8,9-16,17-24,25-32,33-40,41-48, 49-56, 57-64, 65-72]POST EQ(CL5)CH[1-8,9-16,17-24,25-32,33-40,41-48, 49-56, 57-64]POST EQ(CL3)

CH[1-8,9-16,17-24,25-32,33-40,41-48]POST EQ(CL1)

ON4BAND EQ

GATEDUCK

EXPANDCOMP

GR METERCOMP

COMPANDDE-ESSER

KEYIN CUE

HPF

PRE HPF POST EQ

INSERT

METERLEVEL/

DCA1-16

PRE FADER

PRE FADER POST ONPRE FADERINSERT OUT

PRE EQINSERT OUT

To OUTPUT PATCH

PRE EQ

INSERT POINTPOST ON INSERT OUTPRE FADER INSERT OUTPRE EQ INSERT OUT

GR METERMETER

POST ONMETER

DYNA2OUTMETER

DYNA1OUTMETEREQ OUT

METERPRE EQ

PRE HPF / PRE EQ / PRE FADER/POST ON ON LEVEL DIRECT OUT 1-72{64,48} To OUTPUT PATCH

PAN LINK

MATRIX1,3...7MATRIX2,4...8

CUE R

MIX1,3...23MIX2,4...24

CUE L

Keyin Filter

CH INSERT IN1-72{64,48}

To RACKIN PATCH

INSERT

CH 1-72{64,48}

(PRE FADER)PFL / (POST ON)AFL / POST PAN L ON

ON

ST L

MONO(C)

ST R

MIX1 2 2324

STL R

MONO

(C)MATRIX1 2 7 8

CUEL R

METERPRE D.GAIN

CH INSERT OUT 1-72{64,48}

PRE EQ / PRE FADER / POST ON ON LEVELON LEVEL

LEVELPAN

ONPRE EQ / PRE FADER / POST ON

To MATRIXVARI

To MATRIXVARI

STEREO


LEVELPAN


To MIXVARI

To MIXVARI

STEREO

To MIXFIXED

POST ON ONON

To MIXFIXED

STEREO

POST PAN LPOST PAN R

ONON

PAN

TO STLR MONO TO MONO

LCR TO LCR

CSR


(PRE FADER)PFL / (POST ON)AFL / POST PAN R

PAN MODE

DELAYMax

1000ms

INSERT

POST ONINSERT OUT

DigitalGAIN

OSCILLATOR

ON

ONON

ON

ONON

ON

ONON

ON

METERPOST DG

72{64,48}

INP

UT

PAT

CH

I/O device and external head amp


reen shows indicators for the status of the R-series units and the

for V1.61, the version indication will be yellow and the indicator

12


Added display functions for device statusYou can now use the touch screen to verify the status of a connected CL series or R-series unit (except the Ro8-D) or the Dante status.In order to verify the status of an R-series unit from the console, it must be assigned to REMOTE HA in DANTE SETUP.

CL seriesThe SETUP field of the DANTE SETUP screen shows indicators for the status of the CL series console and the Dante network.

R-seriesThe Rio field of the I/O DEVICE scDante network.

For firmware that predates support will be unlit.



as shown until the cause is resolved.it, the unit’s clock is unconfirmed.

IP switches are not set ctly.

Check the DIP switch settings, and set them correctly.

e flow number limit was eded.

Examine the Dante network routing.

Description Possible Solution

ord clock is not set ctly.

Set the clock master and sampling frequency correctly on the CL5/CL3/CL1-native device or in Dante Controller.

e Network circuit is n.

Make sure that the Ethernet cables are not removed or short-circuited.

r Dante-compatible es cannot be found due incorrectly-wired Dante ork.

Make sure that the Ethernet cables are connected correctly.

Description Possible Solution

13

MessagesError, warning, and information messages are displayed. Messages are also displayed in the Dante Controller Error Status field.Each indicator lights or flashes as described below:

■ Error MessagesThe SYSTEM indicators will remain lit/blinking as follows until the problem has been resolved. If service is necessary, please contact the Yamaha service center listed in the CL5/CL3/CL1 owner’s manual.

■ Warning MessagesThe indicators will light and/or flashIf the green [SYNC] indicator is unl

No call-out The indicator is off.

Light The indicator remains lit steadily.

Flash The indicator continues to flash.

Flash x2 The indicator flashes twice cyclically.

Flash x3 The indicator flashes three times cyclically.

SYSTEM Indicators Description Possible Solution

An internal error has occurred.

The device has failed. Contact your Yamaha dealer for repair.

The MAC address setting has been corrupted and no communication can occur via Dante.

The internal memory has been corrupted.

Use the front-panel DIP switches to set START UP MODE to REFRESH, then restart the unit. If the problem persists after setting START UP MODE back to RESUME, consult your Yamaha dealer.

UNIT ID is not unique.Set a unique UNIT ID number for the Dante network.

Flash x2

Flash x3

Flash x3Light

Light

The Dcorre

Dantexce

SYNC Indicators

The wcorre

Dantbroke

Othedevicto anNetw

SYSTEM Indicators

Flash

FlashLight

Flash

Flash x2

Flash x3



/O device settingse Dante audio network, the settings and indications have been

fferentiated by their device type.

cted as supported devices.

number (000–FFF) consisting of the digits 0–9 and the uppercase

er (alphabetical uppercase or lowercase, numerals, or - (hyphen)

the ‘Y’ are supported.

CE SELECT popup window shows the device label and device type.

14

If the green indicator is flashing, the unit is the clock master.If the green indicator is lit, the unit is the clock slave and the clock is synchronized.

■ Information MessagesThe status is shown by the lit/flashing state of the indicator.If the orange [SYNC] indicator is unlit, the unit is operating normally.If the green [SYNC] indicator is unlit, the unit’s clock is unconfirmed.

Improvements in IWhen mounting an I/O device on thimproved so that the units can be di

The following device labels are deteY###-**********

# is a three-digit hexadecimal characters A–F* indicates any desired charactmay be used)Up to 31 characters including

The DEVICE LIST field of the DEVI

SYNC Indicators Description Possible Solution

A non-GbE-compatible device is connected.

When transferring audio via Dante, use device that supports GbE.

The SECONDARY connector has taken over communications during redundant network operation.

Check the circuit connected to the PRIMARY connector.

An abnormality has occurred on the circuit connected to the SECONDARY connector during redundant network operation.

Check the circuit connected to the SECONDARY connector.

SYNC Indicators Description Explanation

Synchronization is occurring.

Please wait until the unit synchronizes completely. It may take up to 45 seconds to synchronize completely.(If the DIP switches of an R-series unit are set to REFRESH, synchronization will not be completed until the CL series unit that is set to “with RECALL” has started up.)

The unit is functioning correctly as the word clock master.

The unit is operating as the word clock master.

The unit is functioning correctly as the word clock slave.

The unit is operating as the clock slave and the clock is synchronized.

LightLight or flash

Flash

Light or flash

Flash x2

Light or flash

Light

Flash

Light

User settings


er bank functions be stored/recalled for individual scenes.rated into areas for each model and stored together in the scene

iffer between models, and are not compatible. For example, custom in a scene stored by the CL5 will not be reproduced if that scene is The settings must be created and stored on the CL3 or CL1.

Recall Store Recall Store

CL3 CL1

CL3 console CL1 console

s

15

User settings

Added functions for the GAIN/PAN/ASSIGN knobs (assignable encoders)Functions have been added to the assignable encoders in SENDS ON FADER mode.

■ If ASSIGN is selected by the top panel [GAIN/PAN/ASSIGN] keyUse the assignable encoders to adjust the channel levels.

Channel name display indication

■ If PAN is selected by the top panel [GAIN/PAN/ASSIGN] keyUse the assignable encoders to adjust the pan of the send from the channel to the MIX/MATRIX bus (buses that are assigned to stereo send in the BUS SETUP screen).

Channel name display indication

Added custom fadCustom fader bank settings can nowCustom fader bank settings are sepadata.

NOTECustom fader bank settings dfader bank settings includedrecalled on the CL3 or CL1. Channel level

Adjust using the assignable encoders.

Send level to MIX/MATRIX busAdjust using the top panel faders.

Pan of the send from the channel to the MIX/MATRIX busAdjust using the assignable encoders.

Send level to MIX/MATRIX busAdjust using the top panel faders.

CL5

CL5 console

Recall Store

Custom fader bank setting

User settings


US PARAMETER field to access the FOCUS PARAMETER

close the popup window; then perform a recall

16

■ Focus functionFor the focus function, you can specify for each scene whether custom bank settings will be recalled (loaded).

1. Press the SCENE field of the Function Access Area.

2. Press the FOCUS tab at the bottom of the SCENE LIST window.

Custom bank settings are included in OTHER PARAMs.

3. Press the SET button of the scene for which you want to make settings; the FOCUS RECALL popup window will appear.

4. Press a button in the FOCpopup window.

5. Verify the object of focus.

6. Press the CLOSE button tooperation.

User settings


py and paste the custom bank settings of the current scene to scene

a, press the SCENE field to access the SCENE LIST

utton located in the upper part of the SCENE LIST BAL PASTE window.

tab.

R BANK button.

E area, select the range of paste-destination scenes.

console was loaded from a USB flash drive as a package, load the cessary. The custom fader bank settings of the user who loaded the

hanges from CL Editor are not reflected immediately. They will be IEW mode.

17

■ Recall Safe functionIn the Recall Safe function, you can specify that custom bank settings of all scenes will be globally excluded from recall operations.

1. In the Function Access Area, press the CH JOB button to access the CH JOB popup window.

2. Press the RECALL SAFE button to access the RECALL SAFE MODE popup window.

3. Press the GLOBAL RECALL SAFE field to access the GLOBAL RECALL SAFE popup window.

4. Press the CUSTOM FADER BANK button to specify it as the object of recall safe.

5. Press the CLOSE button to close the popup window; then perform a recall operation.

■ Global Paste functionThe global paste function lets you codata in memory.

1. In the Function Access Arewindow.

2. Press the GLOBAL PASTE bwindow to open the GLO

3. Select the PATCH/OTHERs

4. Select the CUSTOM FADE

5. In the DESTINATION SCEN

6. Press the PASTE button.

NOTE• If the internal data of the CL

user authentication key as nedata will be applied.

• When in PREVIEW mode, capplied when you exit PREV

User settings


n in the field.

n make a selection containing multiple items of data.

ems.

lections.

of the TYPE field to select the type of data that you want

E field will vary depending on the tab you select.

he operation.

get of the operation.

ms that you can select.



Data content

put channel library

utput channel library

put EQ library

utput EQ library

ynamics library

Data content

ffect library

EQ library

Data content

ortico 5033 library

ortico 5043 library

76 library

18

Added load/save functionsCL series settings can now be loaded individually from a USB flash drive, or saved individually to a USB flash drive.

Loading settings from a USB flash driveFollow the steps below to load CL settings from the USB flash drive into the CL series console.

1. In the Function Access Area, press the SETUP button to access the SETUP screen.

2. Press the SAVE/LOAD button to access the SAVE/LOAD popup window.

3. To select the file that you want to load, press the name of the desired file in the file list, or rotate the corresponding multifunction knob on the panel.

4. Press the LOAD button to access the LOAD SELECT popup window.

1 TYPE fieldSelects the type of data to be loaded.

2 SOURCE fieldThis area lists the data that is saved on the USB flash drive.

3 DESTINATION fieldIndicates the load-destination.

4 Data selection knobThis knob selects the data show

5 MULTI SELECT buttonBy pressing this button you ca

6 SELECT ALL buttonPress this button to select all it

7 CLEAR ALL buttonPress this button to clear all se

5. Press the tabs and buttonsto load.The content shown in the TYP

• ALL tabAll items will be the target of t

• SCENE tabScene memories will be the tar

• INPUT/OUTPUT tabThe following table lists the ite

• EFFECT/GEQ tabThe following table lists the ite

• PREMIUM tabThe following table lists the ite

1

2 3

4 45 6 7

Buttons

IN CH LIB In

OUT CH LIB O

IN EQ LIB In

OUT EQ LIB O

DYNA LIB D

Buttons

EFFECT LIB E

GEQ LIB G

Buttons

5033 LIB P

5043 LIB P

U76 LIB U

User settings


settings on a USB flash driventernal data on a USB flash drive.

a, press the SETUP button to access the SETUP screen.

ton to access the SAVE/LOAD popup window.

ctory icon and change the directory.

access the SAVE SELECT popup window.

to be saved.

f the CL series console.

n in the field.

n make a selection containing multiple items of data.

3

4

19

• SETUP tabThe following table lists the items that you can select.

NOTEIf you load output port items individually, the settings of the channel assigned to the port will not be reflected. Recall them after loading a scene that includes input/output patching with those channel settings.

• ADMIN tabThe following table lists the items that you can select.

6. In the SOURCE field, add a check mark ( ) to select the data that you want to load.If you want to load multiple items of data in a single operation, press the MULTI SELECT button.

7. In the DESTINATION field, add a check mark ( ) to the load-destination.

8. Press the LOAD button.

NOTEIf the number of loadable data items in the DESTINATION list is less than the number of items being loaded, the allowable number of data items will be loaded.

Saving the CL console’sHere’s how to save the CL console’s i

1. In the Function Access Are

2. Press the SAVE/LOAD but

3. If necessary, press the dire

4. Press the SAVE button to

1 TYPE fieldThis specifies the types of data

2 SOURCE fieldThis shows the internal data o

3 DESTINATION fieldIndicates the save-destination.

4 Data selection knobThis knob selects the data show

5 MULTI SELECT buttonBy pressing this button you ca

Opt-2A LIB Opt-2A library

EQ-1A LIB EQ-1A library

DynaEQ LIB DynamicEQ library

Buttons Data content

MIXER SETUP Mixer setup

OUTPUT PORT Output ports

MONITOR CUE/MONITOR/OSCILLATOR/TALKBACK

MIDI SETUP MIDI Setup

MIDI PGM MIDI program changes

MIDI CTL MIDI control changes

Dante In Patch DANTE input patch library


ADMIN PREF PREFERENCE (For administrator)

ADMIN UDEF USER DEFINED KEYS/USER DEFINED KNOBS (For administrator)

ADMIN FADER CUSTOM FADER BANK (For administrator)

GUEST PREF PREFERENCE (For guest)

GUEST UDEF USER DEFINED KEYS/USER DEFINED KNOBS (For guest)

GUEST FADER CUSTOM FADER BANK (For guest)

GUEST LEVEL USER LEVEL (For guest)


4 5 6 7

1

2

User settings



individually, the settings for the channel assigned to the port will not to save the scene that includes the input/output patching for those

ADMIN tab when loading items individually will be included in ALL

a check mark ( ) to select the data that you want to

ms of data in a single operation, press the MULTI SELECT button.

, add a check mark ( ) to the save-destination.

access the FILE SAVE popup window.

ent, and press the SAVE button.

Data content

ixer setup

utput ports

UE/MONITOR/OSCILLATOR/TALKBACK

IDI Setup

IDI program changes

IDI control changes

ANTE input patch library

20

6 SELECT ALL buttonPress this button to select all items.

7 CLEAR ALL buttonPress this button to clear all selections.

5. Press the tabs and buttons of the TYPE field to select the type of data that you want to save.The content shown in the TYPE field will vary depending on the tab you select.

• ALL tabAll items will be the target of the operation.

• SCENE tabScene memories will be the target of the operation.

• INPUT/OUTPUT tabThe following table lists the items that you can select.

• EFFECT/GEQ tabThe following table lists the items that you can select.

• PREMIUM tabThe following table lists the items that you can select.

• SETUP tabThe following table lists the ite

NOTE• If you save output port items

be saved. You will also needchannel settings.

• Items that are included in thewhen saving.

6. In the SOURCE field, add save.If you want to save multiple ite

7. In the DESTINATION field

8. Press the SAVE button to

9. Enter a file name or comm


IN CH LIB Input channel library

OUT CH LIB Output channel library

IN EQ LIB Input EQ library

OUT EQ LIB Output EQ library

DYNA LIB Dynamics library


EFFECT LIB Effect library

GEQ LIB GEQ library


5033 LIB Portico 5033 library

5043 LIB Portico 5043 library

U76 LIB U76 library

Opt-2A LIB Opt-2A library

EQ-1A LIB EQ-1A library

DynaEQ LIB DynamicEQ library

Buttons

MIXER SETUP M

OUTPUT PORT O

MONITOR C

MIDI SETUP M

MIDI PGM M

MIDI CTL M

Dante In Patch D

User settings

21
Added function for recovering from USB overcurrentEven if the connection with the USB device was stopped because an overcurrent condition occurred at the USB port, it is now possible to reconnect the USB device without restarting.

Recovery procedureAfter removing the cause of the overcurrent at the USB port, press the location that shows “USB REMOUNT” at the FORMAT button of the SAVE/LOAD screen.

Other functions


lornel color. If black is selected for a channel, its channel color

/ICON popup window.

en that includes the input channel whose channel color

/channel name field of that channel to access the dow.

22

Other functions

Improvements to the channel name displayImprovements have been made to the channel name display and channel color indicator.

The channel on/off status is now shown in SENDS ON FADER mode.

If NAME DISPLAY is set to “NAME ONLY” in the PREFERENCE page of the USER SETUP popup window, the channel number is now shown.

Added channel coBlack can now be specified as a chanindicator will be unlit.

Make this setting in the CH COLOR

■ Channel color setting

1. Access the OVERVIEW screyou want to specify.

2. Press the channel numberPATCH/NAME popup win

3. Select a channel color.

Channel on

Channel off

Channel number indication

Other functions


nte audio network settingsettings to also be initialized to their factory-set state when an error

le settings including the Dante audio network settings that had been will be lost.

n only if you are very sure you want to do this!

CENE MEMORY [STORE] key and [INC] key on the panel, CL console.

initialization is complete; press the CLOSE button.

23

Added GPI functionsYou can now select the attributes (latched or unlatched) of an external switch connected to a GPI IN port.

■ GPI settings

1. In the Function Access Area, press the SETUP button to access the SETUP screen.

2. Press the MIDI/GPI button to access the MIDI/GPI screen.

3. Press the GPI tab.

Each time you press a switch attribute button, its indication will alternate between LATCH and UNLATCH.

LATCH (a switch that alternately turns on/off each time it is pressed) is selected.

UNLATCH (a switch that is on only while pressed and is off when released) is selected.

Initializing the DaIt is now possible for Dante-related soccurs on the Dante audio network.

NOTICEWhen you initialize, all consopreviously saved in memory

Proceed with the following operatio

1. While holding down the Sturn on the power to the

2. A message indicates that Switch attribute button


POST ONINSERT OUT

To OUTPUT PATCHTo RACKIN PATCH(21-24)To KEYIN

To MONITOR SELECT

ATT 4BAND EQ

COMPCOMPANDEXPAND

INSERT

POST EQ

LEVEL

PRE EQINSERT OUT

PRE EQ

GR METERMETER

DYNA OUTMETEREQ OUT

METERPRE EQ

Keyin Self PRE EQ/Self POST EQ/MIX21-24 OUT/ MIX(1-8,9-16,17-24) POST EQ

PRE FADER

CUE ON(PRE FADER)PFL / (POST ON)AFL

MIX 1-24

MATRIX 1-8

CASCADE OUTTo OUTPUT PATCH

To OUTPUT PATCH

To OUTPUT PATCH

To OUTPUT PATCH

To OUTPUT PATCH

To OUTPUT PATCHTo OUTPUT PATCH

To OUTPUT PATCH

To OUTPUT PATCHCUE CASCADE OUT LR

STEREO CASCADE OUT L,R,MONO(C)

MIX CASCADE OUT1-24

MATRIX CASCADE OUT1-8



ON

POST ON

METERPOST ON

MIX OUT1-24INSERT

METERPRE FADER

PRE FADERINSERT OUT

To OUTPUT PATCH

MIXINSERT IN 1-24

To RACKIN PATCHMIX

INSERT OUT 1-24

ST L

MONO(C)

ST R

ONLEVELONLEVEL

LEVEL

PAN/BAL

ON

To MATRIXVARI

To MATRIXVARI

STEREO



To OUTPUT PATCHTo MONITOR SELECT

ATT 4BAND EQ

COMPCOMPANDEXPAND

INSERT

POST EQ

LEVEL

PRE EQINSERT OUT

PRE EQ

GR METERMETER

DYNA OUTMETEREQ OUT

METERPRE EQ

Keyin Self PRE EQ/Self POST EQ/MIX21-24 OUT/ ST(L,R,MONO(C)) POST EQ

PRE FADER

STEREO L,R,MONO(C)

ON

POST ON

METERPOST ON

STEREO OUTL,R,MONO(C)INSERT

METERPRE FADER

BAL

PRE FADERINSERT OUT

To OUTPUT PATCH

STEREOINSERT IN L,R,MONO(C)

To RACKIN PATCHSTEREO

INSERT OUT L,R,MONO(C)

To OUTPUT PATCHTo MONITOR SELECT

ATT 4BAND EQ

COMPCOMPANDEXPAND

INSERT

POST EQ

LEVEL

PRE EQINSERT OUT

PRE EQ

GR METERMETER

DYNA OUTMETEREQ OUT

METERPRE EQ

Keyin Self PRE EQ/Self POST EQ/MIX21-24 OUT/ MATRIX1-8 POST EQ

PRE FADER

ON

POST ON

METERPOST ON

MATRIX OUT 1-8INSERT

METERPRE FADER

PRE FADERINSERT OUT

To OUTPUT PATCH

MATRIXINSERT IN 1-8

To RACKIN PATCHMATRIX

INSERT OUT 1-8


PAN/BALTO ST LR MONOTO MONO

LCRTO LCR

CSRPOST ON

PAN MODE

PRE FADER / POST ON

PRE FADER / POST ON

PRE FADER / POST ON

PRE FADER / POST ONONLEVELONLEVEL

LEVEL

PAN/BAL

ON

To MATRIXVARI

To MATRIXVARI

STEREO


INSERT


INSERT POINT POST ON INSERT OUTPRE FADER INSERT OUTPRE EQ INSERT OUT

POST ONINSERT OUT

INSERT

POST ONINSERT OUT

INSERT


Refer to CL5/CL3/CL1 Mixer Block Diagram 2/2

CUE / MONITOR

BAL

BAL

24

INSERT INPATCH

(OUTPUT CH)

2

PREMIUM RACK INPATCH

EFFECT RACK INPATCH

64

CASCADEIN

SELECT

SLOT1 1-16SLOT2 1-16SLOT3 1-16

ATT

KeyinSelf PRE EQ


CH[1-8,9-16,17-24,25-32,33-40,41-48, 49-56, 57-64, 65-72]POST EQ(CL5)CH[1-8,9-16,17-24,25-32,33-40,41-48, 49-56, 57-64]POST EQ(CL3)

CH[1-8,9-16,17-24,25-32,33-40,41-48]POST EQ(CL1)

ON4BAND EQ

GATEDUCK

EXPANDCOMP

GR METERCOMP

COMPANDDE-ESSER

KEYIN CUE

HPF

PRE HPF POST EQ

INSERT

METERLEVEL/

DCA1-16

PRE FADER

PRE FADER POST ONPRE FADERINSERT OUT

PRE EQINSERT OUT

To OUTPUT PATCH

PRE EQ


GR METERMETER

POST ONMETER

DYNA2OUTMETER

DYNA1OUTMETEREQ OUT

METERPRE EQ

PRE HPF / PRE EQ / PRE FADER/POST ON ON LEVEL DIRECT OUT 1-72{64,48} To OUTPUT PATCH

PAN LINK


CUE R

TB INPUTMETER

HA

MIX1,3...23MIX2,4...24

CUE L

Keyin Filter

CH INSERT IN1-72{64,48}

To RACKIN PATCH

INSERT

CH 1-72{64,48}

72{64,48}

CASCADE IN

To MONITOR SELECT

TALKBACK

INPUTSELECT

ONDANTE IN 1-64OMNI IN 1-8

(PRE FADER)PFL / (POST ON)AFL / POST PAN L ON

ON

ST L

MONO(C)

ST R

MIX1 2 2324

STL R

MONO

(C)MATRIX1 2 7 8

CUEL R

METERPRE D.GAIN

+48V+48V MASTER

+48V

AD[TALKBACK INPUT]

TALKBACKINPUT

TALKBACKLEVEL

ON

12

3+-

+48V

AD[OMNI IN][1-8]

OMNI IN +-1

2

3

METERHA

CH INSERT OUT 1-72{64,48}


LEVELPAN


To MATRIXVARI

To MATRIXVARI

STEREO


LEVELPAN


To MIXVARI

To MIXVARI

STEREO

To MIXFIXED

POST ON ONON

To MIXFIXED

STEREO


ONON

MIX INSERT IN 1-24

STEREO INSERT IN L,R,MONO(C)24

3

CH INSERT IN 1-72{64,48}

MATRIX INSERT IN 1-88

LEVEL ON

Pink NoiseBurst Noise HPF LPF

METEROSCOSCILLATOR

Sine Wave

Refer to CL5/CL3/CL1 Mixer Block Diagram 2/2

INPUT PATCH

DANTE IN1-64

OMNI IN1-8

SLOT3 1-16

SLOT2 1-16

SLOT1 1-16

STEREO OUT L,R,MONO(C)

CHINSERT OUT

1-72{64,48}

MIXINSERT OUT

1-24STEREO

INSERT OUT L,R,MONO(C)

MATRIXINSERT OUT

1-8

GEQ RACK INPATCH

GEQ1 INA(L)/B(R)

GEQ2-16 IN A(L)/B(R)

FX1 INA(L)/B(R)

FX2-8 INA(L)/B(R)

INSERT INPATCH

(INPUT CH)

FX1 OUTA(L)/B(R)

FX2-8 OUTA(L)/B(R)

PR1-8 OUTA(L)/B(R)

FX1-8 OUTA(L)/B(R)

GEQ RACK1(GEQ1)

Flex15GEQ

METER RACK IN AMETER RACK IN B

METER RACK OUT AMETER RACK OUT B

GEQ RACK2-16(GEQ2-16) (same as GEQ RACK1)

EFFECT RACK2-8(FX2-8) (same as EFFECT RACK1)

EFFECT RACK1(FX1)

EFFECT

METER RACK IN LMETER RACK IN R

METER RACK OUT LMETER RACK OUT R

Flex15GEQ

METER RACK IN AMETER RACK IN B

METER RACK OUT AMETER RACK OUT B

EFFECT CUE

PAN


LCR TO LCR

CSR



EFFECT CUE SELECTPR1-8 OUT L/REFFECT CUE

ON

KEYIN CH1-72{64,48}KEYIN CUE KEYIN CUE SELECT

ON

PAN MODE

GAIN/TRIM

31BandGEQMETER RACK IN METER RACK OUT

31BandGEQMETER RACK IN METER RACK OUT


To MATRIX INSERT IN

To STEREO INSERT IN

To MIX INSERT IN

To CH INSERT IN

PR1-2 OUTA(L)/B(R)

FX1-8 OUTA(L)/B(R)

To CASCADE IN SELECT

[SLOT]SLOT1

SLOT2

SLOT3

METERSLOTIN

16

16

16

METERSLOTIN

METERSLOTIN

72

MATRIX OUT1-8

MIX OUT1-24

OUTPUTS

[DANTE] DANTEINPUT

METER

DANTE IN

DELAYMax

1000ms

INSERT

POST ONINSERT OUT

PR1 INA(L)/B(R)

PR2-8 INA(L)/B(R)

PR1 OUTA(L)/B(R)

PR2-8 OUTA(L)/B(R)PREMIUM RACK2-8 (same as PREMIUM RACK1)

PREMIUM RACK1(PR1)

PROCESSOR

METER RACK IN LMETER RACK IN R

METER RACK OUT LMETER RACK OUT R

EFFECT CUE

FX1-8 OUT L/R

RECORDER CUE SELECTPLAYBACK OUT L/RRECORDER CUE

ONRECORDER INL/R

To MONITOR SELECT

METERPLAYBACK OUT

RECORDER CUE

[PLAYBACKOUT]

GAIN

DECODER

16

ON

METERLEVEL/

DCA1-16

PRE FADER

PRE FADER POST ON

METERPOST ON

PAN LINK


CUE R

MIX1,3...23MIX2,4...24

CUE L(PRE FADER)PFL / (POST ON)AFL / POST PAN L ON

ON

ST L

MONO(C)

ST R

To MATRIX

To MIXSAME as INPUT1-72{64,48}

PAN/BAL


LCR TO LCR

CSR



PAN MODE 8R

DigitalGAIN

KeyinSelf PRE EQ


ST IN 1L-8R POST EQ

4BAND EQ

GATEDUCK

EXPANDCOMP

GR METERCOMP

COMPANDDE-ESSER

KEYIN CUE

HPF

PRE HPF POST EQPRE EQ

GR METERMETER

DYNA2OUTMETER

DYNA1OUTMETEREQ OUT

METERPRE EQ

Keyin Filter

METERPRE D.GAIN

DELAYMax

1000ms

SAME as INPUT1-72{64,48}


GEQ1-16 OUTA(L)/B(R)

8

1

DigitalGAIN

ATT

OMNI IN 1-8

OMNI IN 1-8

OSCILLATOR

OSCILLATOR

ON

ONON

ON

ONON

ON

ONON

ON

METERPOST DG

USB

1 2 3 4

ST IN 1L –

Block Diagram

25
OUTPUTS

PHONES OUT LR [PHONES]DA

PHONES LEVEL

2

TipRingSleeveOUTPUT

PATCH

SLOT1

SLOT2

SLOT3

[SLOT]1 6

1 6

1 6

METER SLOT1OUT

METER SLOT2OUT

METER SLOT3OUT

DELAY(MAX:1000ms)

DELAY(MAX:1000ms)

DELAY(MAX:1000ms)

DA [OMNI OUT] (1-8)8

+- 1

2

3

METER OMNI OUTDELAY(MAX:1000ms)

TRIMGAINOUTPUT PATCH

2DIT [DIGITAL OUT]AES/EBU

DELAY(MAX:1000ms)

METER DIGITAL OUT

TRIMGAIN

TRIMGAIN

[DANTE OUT] (1-64)6 4METER DANTE OUTDELAY

(MAX:1000ms)

GAINOUTPUT PATCH

DANTEOUTPUT

MIX CASCADE OUT 1-24STEREO CASCADE OUT L,R,MONO(C)

MATRIX CASCADE OUT 1-8CUE CASCADE OUT L,R

DIRECT OUT 1-72{64,48}

MATRIX OUT 1-8

MIX OUT 1-24STEREO OUT L,R,MONO(C)

MONITOR OUT L,R,MONO(C)CUE OUT L,R

CH INSERT OUT 1-72{64,48}MIX INSERT OUT 1-24

STEREO INSERT OUT L,R,MONO(C)MATRIX INSERT OUT 1-8

2

RECORDER CUE

GAIN

METERRECORDER IN

OUTPUT PATCH

ENCODER [2TR RECORDER]OUTPUT PATCH

MONITOR L

MONITOR R

MONITOR MONO(C) MONITOR OUT MONO(C)

MONITOR OUT R

MONITOR OUT LTo OUTPUT PATCH

To OUTPUT PATCH

To OUTPUT PATCH

MONO

METER MONITOR R

METER MONITOR MONO(C)

TALKBACK ON

METER MONITOR L

CUE TRIM(INPUT/OUTPUT/DCA)

CUE LCUE R

MONO METER CUE L

METER CUE R

ON

MONITORLEVEL

DIM

MER

MONITOR DIMM ON

CUE LOGIC

+MONO(C)

MO

NIT

OR

SEL

ECT

MATRIX OUT1-8MIX OUT1-24

OMNI IN 1/2

DEFINEMIX

(MAX:8ch)

OMNI IN 3/4OMNI IN 5/6OMNI IN 7/8

STEREO OUT L,RSTEREO OUT MONO(C)STEREO OUT L,C,R

PHONES L

PHONES R

To PHONES OUT

To PHONES OUTDELAY(MAX:1000ms)

DELAY(MAX:1000ms)

PHONES LEVEL LINK

An output port delay becomes invalid by assigning a monitor out to the output port.

CUE OUT L

CUE OUT R

To OUTPUT PATCH

To OUTPUT PATCH

CUE OUT ON

PLAYBACK OUT

OMNI IN 1/2OMNI IN 3/4OMNI IN 5/6OMNI IN 7/8PLAYBACK OUT

STEREO OUT L,RSTEREO OUT MONO(C)

CUE L BUS

CUE R BUS

CUE / MONITOR

STEREO L

MONO(C)

STEREO R

DELAY(MAX:1000ms)

DELAY(MAX:1000ms)

DELAY(MAX:1000ms)

MONITORFADER

CUE INTERRUPTION

CUE ON

DELAY(MAX:1000ms)

DELAY(MAX:1000ms)

ON

MONITOR DELAY AUTO BYPASS

CUE OUTLEVEL

USB

1 2 3 4

310IP-A0

© 2013 Yamaha CorporationC.S.G., PA Development Division

Yamaha Manual Libraryhttp://www.yamaha.co.jp/manual/

Yamaha Pro Audio Global Web Sitehttp://www.yamahaproaudio.com/

Documents

CL5/CL3/CL1 V1.7 Supplementary Manual · 2019-07-10 · EN V1.7 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1