Embed Size (px)
Citation preview
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
Model: IF2008
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
Fixing nut x 2
Steel washer
Rubber washer
Counter top
Square washer
Threaded rod x 2
Faucet
Spanner
Cold water line
Faucet
Cold water line connector
Hot water line connector
Hot water line
Supply valve(hot)
Hot water line
Supply valve(cold)
Cold water line
Wrench(not supplied)
6 34 "
7 78 "
6 34 "
38 "
23 34 "
3/8 Comp.
1 14 "max
1 38 "
Faucet hole
10.00°
3 58 "
4 38 "
1 58 "
45.00°
45.00°
5 38 "
PARTS INCLUDED
INSTALLATION MANUAL
Fixing nut x 2
Steel washer
Rubber washer
Counter top
Square washer
Threaded rod x 2
Faucet
Spanner
Cold water line
Faucet
Cold water line connector
Hot water line connector
Hot water line
Supply valve(hot)
Hot water line
Supply valve(cold)
Cold water line
Wrench(not supplied)
6 34 "
7 78 "
6 34 "
38 "
23 34 "
3/8 Comp.
1 14 "max
1 38 "
Faucet hole
10.00°
3 58 "
4 38 "
1 58 "
45.00°
45.00°
5 38 "
A Faucet o-ring x 1 B Rubber washer x 1
C Steel washer x 1 D Nut assembly x 1F Water line x 2
BEFORE INSTALLATION
TROUBLE SHOOTING
LIMITED LIFETIME WARRANTYINOLAV provides its customers with an extensive warranty as a result of our excellent workmanship and high quality components used in our products.
Mechanical warranty: A limited lifetime warranty is provided on all mechanical parts to be free from manufacturing defects in materials and workmanship under normal use for as long as the original purchaser owns their home. Finish warranty: A 5-year warranty is provided on all INOLAV faucet finishes to the original purchaser against manufacturing defects in materials and workmanship.
At its sole discretion, INOLAV will repair or replace any part or finish that proves to be defective in material and/or workmanship under normal installation, use and service.
This warranty is extended to the original consumer owner, but does not cover installation or any other labor charges. In no event shall INOLAV be liable for any incidental, consequential or special damages, installation cost, labor, travel time, freight costs incurred, lost profits, or contingent liabilities. INOLAV makes no representation that its products comply with any or all local building or plumbing codes. It is the consumer’s responsibility to determine local code compliance.
For warranty issues call us at 1-855 472 4304 or send us an e-mail at [email protected] For questions call us at 1-855 472 4304 or visit our website at www.inolav.com
CLEANING AND CAREClean the faucet often with a soft cloth to keep it looking like new. For heavy cleaning you can use mild liquid detergents or non-abrasive liquid polisher. Rinse with water and dry with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
Before your installation please make sure you have received the parts indicated below.
Compliance:NSF/ANSI 61ASME A112.18.1CSA B125.1
U PC
®C
Unscrew the aerator and allow the water to run freely for 5 minutes. Then replace the aerator and tighten. It is recom-mended that you clean the aerator periodically. To do this, remove the aerator, then rinse it with running water until any loose debris are cleared.
Single handle basin faucet
INSTALLATION INSTRUCTIONS
A1 - 2
● We recommend that this product is installed by a qualified professional contractor.
● Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make
sure this product is the correct model and you have all the parts required for installation and using.
● Please flush the water system to ensure that no metal swarf, solder, and other impurities can enter the taps.
● Turn off water supply before commencing work, this should be done at the isolating valves of inlet feeds if fitted or main stopcock.
● Please read these instructions carefully and keep it for future reference.
We do NOT recommend you use any household cleaners to clean the product. Because these cleaners change substance or formula
too frequently. The product should be always cleaned only with soapy water and rinsed with clean water and dried with a soft cloth.
Important
CleaningBefore use: Unscrew the Aerator and allow the water to run freely for 5 minutes. Then screw the filter back in place.
Periodically: Unscrew the Aerator and remove. Rinse it with running water until any loose debris is cleared. Then replace the Aeratorand tighten.
Maintainance
Aerator
ProblemLeaks underneath handle.
Aerator leaks or has inconsistent water flow pattern.
Water will not shut off completely.
CauseCartridge is loose or damaged.
Aerator is dirty or mystified.
Dirty or worn out plastic washer in the cartridge.
ActionMake sure retaining nut is fully tighten. Adjust or replace cartridge if necessary.
Unscrew aerator to check rubber packing or replace aerator.
Adjust or replace cartridge.
E Aerator spanner x 1
Supply valve(hot)
Supply valve(cold)
Wrench(not supplied)
Hot water line connector Cold water
line connector
Faucet
Hot water line Cold water line
Threaded rod
Rubber washer
Steel washer
Fixing nut
Spanner
Counter topFaucet o-ring
Faucet
Hot water lineCold water line
2" 4 78 "
2"
1 34 "
45.00°
45.00°
4 12 "
7 12 "
38 "
1 38 "
1 14 "
max
6 12 "
8.00°max
4 78 "
3/8" comp.
6 12 "
24 34 "
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
STEP 1Screw waterlines into corresponding line connectors of faucet body. Make sure o-ring goes into the line connector. Do not over tighten.
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
STEP 2Secure faucet to counter top or basin using the mounting kit as described in the figure. 1-Insert faucet o-ring into groove of faucet body and insert threaded tube into faucet hole. 2-Align rubber and steel washer, and screw nut assembly by hand all the way up. 3-Using a phillips screw driver, tighten the nut assembly.
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
STEP 3Screw water lines into corresponding water supply lines in the wall using a 5/8” wrench. Do not over tighten. Check for leakage.
For questions call us at 1-855 472 4304 or visit our website at www.inolav.com For questions call us at 1-855 472 4304 or visit our website at www.inolav.com
IF2008 Spec sheetSingle handle basin faucet.
Supply valve(cold)
Supply valve(hot)
Wrench(not supplied)
Faucet body
Threaded tube
Faucet o-ring
Counter top
Rubber washer
Steel washer
Nut assembly
Phillips screw driver(not supplied)
Hot water line connector
Cold water line connector
Hot water line
Cold water line
Cold water line
Hot water line
8 18 "
4 78 "
4"
5 34 "
50.00°
50.00°
1 34 "
1 1/4" max
27"
1 38 " Faucet
hole
Cold
Hot
2"
2 38 "
7 58 "
3 14 "
22.00°
4 38 "
