Upload
ronat
View
27
Download
0
Embed Size (px)
DESCRIPTION
CLIC_DDS2HPT 11.03.2010. V. Khan. Cell#2. Cell#5. Cell#1. Cell#13. Cell#17. Cell#9. Cell#23. Cell#24. Cell#21. 24 cells No interleaving. Undamped. Damped. ∆fmin = 62.3 MHz ∆tmax =16.05 ns ∆s = 4.81 m. 24 cells No interleaving. N=1. Scanning a’s and g’s for a min S11. - PowerPoint PPT Presentation
Citation preview
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 1/10
CLIC_DDS2HPT11.03.2010
V. Khan
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 2/10
Cell#1 Cell#2 Cell#5
Cell#9 Cell#13 Cell#17
Cell#21 Cell#23 Cell#24
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 3/10
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 4/10
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 5/10
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 6/10
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 7/10
24 cellsNo interleaving
∆fmin = 62.3 MHz∆tmax =16.05 ns∆s = 4.81 m
24 cellsNo interleaving
Undamped
Damped
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 8/10
Scanning a’s and g’s for a min S11
N=1
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 9/10
S. Tantawi method
│S22│=0.9527 ϕ22=179.65
CLIC_DDS2HPTCell#1
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 10/10
NextTask Feb Mar Apr May-Jul Sept Oct
onwards
Finalising 9 regular cells for the 1st str.
Done
Matching end cells In progress
HFSS: Full structure(N+2 cells) simulations
To do
Comparison of results (wakefield)in GdfidL
Mechanical design & fabrication (?)
Thesis writing-submission to RMJ
To do
Thesis submission to Uni.
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 11/10
Back up slides
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 12/10
DDS1 : Plain curve ; DDS2 : Curve with dots
Dipole mode : circuit parameters
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 13/10
DDS2_HPT : Surface fields
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 14/10
DDS2_HPT : RF properties
Max. Values
Esur=220 MV/m∆T = 51 deg.Pin= 70.8Eacc_UL=131 MV/mSc=6.75 W/μm2
RF-beam-eff=23.5%
∆T
35*Sc
Esur
Eacc
Pin
Dashed curves : Unloaded conditionSolid curves: Beam loaded condition
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 15/10
Matching cell design
• Two options• Vary a and b : very small room to vary b vary a and L
L
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 16/10
N=1a: 4-6 mm N=2
a: 4-6 mm
N=3a: 4-6 mm
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 17/10
N=1a: 4.4-4.6 mm N=2
a: 4.4-4.6 mm
N=3a: 4.4-4.6 mm
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 18/10
NextTask Feb Mar Apr May-Jul Sept Oct
onwards
Finalising 9 regular cells for the 1st str.
Done
Matching end cells In progress
HFSS: Full structure(N+2 cells) simulations
To do
Comparison of results (wakefield)in GdfidL
Mechanical design & fabrication (?)
Thesis writing-submission to RMJ
To do
Thesis submission to Uni.
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 19/10
)/(E
ESImagSReS 2
2
cell singleacc
ULureacc_struct
61
c mW
Where S= Poynting vector
@ 95 MV/m
Cell # 1
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 20/10
@ 138 MV/m
Cell # 24
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 21/10
DDS2_HPT structure
Cell Eacc Q R’/Q vg/c Es/Eacc Hsur/Eacc Sc/Eacc2
# (V/m) kΩ/m (%) mA/m W/(x10-4)
1 0.4488 5020 10.179 2.07 2.23 4.9 7.3
2 0.4563 5091 10.649 1.85 2.2 4.82 6.9
5 0.4882 5325 11.723 1.62 2.05 4.5 5.5
9 0.5255 5604 12.899 1.51 1.89 4.15 4.5
13 0.5555 5838 13.952 1.42 1.8 4.0 4.0
17 0.5828 6061 15.049 1.34 1.7 3.75 3.4
21 0.6021 6307 16.416 1.22 1.66 3.5 2.9
23 0.4217 6451 17.411 1.11 1.65 3.3 2.9
24 0.5749 6534 18.130 1.0 1.67 3.3 2.98
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 22/10
Vasim Khan MEW group meeting, Cockcroft Institute 11.03.10 23/10
Cell # 1
Cell # 24