MOVING FLOOR TRAILER

MOVING FLOOR

WWW.STAS.BE

Aluminium sub frame with self-supporting monocoque bodystructure

Low empty weight= more loading capacity

User-friendly

CE & TÜV certificat

Exclusive STAS SUBFLOOR concept

Empty weight (kg)

as of (*)

Volume (m3)

Internal length(mm)

Internal width (mm)

Internal height (mm)

Coupling height(mm)

BRIGHT FLOOR

6.900 92 13.500 2.475 2.650 (f)2.825 (b) ± 1.180

(*) depending on the equipment

RECOMMENDED USE

Suitable for transport of bulk products and palletized goodsHighly versatile transport tool(Detailed list of suitable products: see recommendation lists issued by the supplier of the hydraulic drive-unit)

CHASSIS

Sub frame in high quality aluminium profiles with welded cross- membersReinforcements at the height of the hydraulic drive-unit and axles

AxLES AND SUSpENSION

3 x 9 tonne MERCEDES DCA air suspension - with 22.5” disc brakes (Ø 430 mm)Original DCA air suspensionLower/raise valve

TYRES

6 x steel rims 22.5 x 11.75 (Off set 120)6 x tyres 385/65 R22.5 GOODYEAR MST (other makes optional)

BRAKES

2-line air brakes to current CE regulations - WABCO EBS-E 2S/2M2x aluminium air tanks (1x100L for brakes + 1x60L for air-suspension)Parking brake by means of spring brakes on 2 axlesR.S.S. (Roll Stability System)

KING pIN AND LANDING LEGS

2” kingpin, replaceable from below, assembled in a 10 mm steel rubbing plateLanding legs, designed with rocking feet for trailers with airsuspension

ELECTRICS AND LIGHTS

Complete Aspöck set 24V in accordance with EG 97/28 including:2x7 pin sockets + 1x15 pin socket2 x parking lights10 x orange LED side marker lights2 x number plate holder lights2x5-functions Aspöck rear lights with built-in reflector lights 1 reversing light/floodlight at the back of the trailer

MOVING SYSTEM

Make: KEITH WALKING FLOOR® or CARGO FLOOR®Aluminium planks, ribbed, with aluminium end caps and aluminium wear plate - stroke: 200 mmDrive unit and frame with 3 hydraulic cylinders, hoses and valvesElectric operation with remote control (with wonder lead), mounted in a PVC box

Emergency operationHydraulic couplings on the front bulkhead (pressure: ¾”, return: 1”) and provision for connection at the height of the landing legs, hoses are made shut by means of a plugSwitching valve for loading and offloading

GENERAL EQUIpMENT

Single aluminium spare wheel carrier, PVC tool box, PVC mud-guards with 2 spray suppression mudflaps, retractable ladder at the back, aluminium ladder, 2 wheel wedges, hinged protection for the rear lights, aluminium rear under run bar, aluminium side under run bars (1 side fixed, 1 side hinged), toolkit for changing wheels, attachment for detachable hopper at the back, aluminium buffers protecting the rear door hinges and door frame, standard prevision for floor sheet (manual or hydraulically operated), Wabco smartboard

BODY

Monocoque, high grade aluminium bodyFloor construction made of 140 mm high narrow mounted cross-membersSides: • Smooth panels (600 mm wide, 30 mm thick) clamped together and fully seam welded on the insideFront bulkhead: • Straight front bulkhead in smooth 600 mm plank profiles • Large safety catwalk Banister with safety bar, safety plinth, handhold and safety chain • With ladder coming straight down on both sidesRear door: • Smooth bar type rear door made of plank profiles, with, inside as well as outside, fully welded door frame • With exchangeable rubber sealing • 1 powerlock on each door panel • Hinged header bar with auto-lock mechanismMoving bulk head: • Made of plank profiles, with brushes on the sides • Floor sheet 2520 x 1300 mm, that can be fitted to the moving bulkhead

ROOF CONSTRUCTION AND SHEETING

3 hinged round cross bars, flush with the top railStandard roll over sheet, colour free of choice, with translucent strip and 2 longitudinal straps - aluminium sheet bar

FINISHING

Chemical cleaning of the alloy partsSpecial adapted base coat for optimum adhesion of the paintHigh-gloss painting, 1 colour free of choice (metallic colour optional)

Industriezone E17 | Flanders Fieldweg 45 | B-8790 WaregemT +32 (0)56 60 01 91 | F +32 (0)56 60 01 95sales@stas.be | www.stas.be

REMARK:Dimensions and weights are approximately and can be altered according to the vehicle’s components and without any prior notice by the manufacturer. All dimensions and weights are measured according to the DIN 70020 regulation.

VERSION: May 2009