Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
4.9 STARS
CLIENT REVIEWS
HEAVY DUTYDRILL BITS
FOR METAL
www.ttp-hard-drills.com (UK) - www.ttp-hard-drills.net (USA)
www.ttp-hard-drills.com (UK) - www.ttp-hard-drills.net (USA)
DRILLING RUSTED SCREW HEADS
Malcolm
Good for drilling out rusted heads for liftinghardwood decking - very effective indeed.
DRILLING STAINLESS STEEL
Trevor Ball
Hello there….I just thought I’d drop you a linecommending your products. The 6,5,4 and 3 mm drill bitswork a treat on my stainless steel cycle rack. Initially Iran the drills too fast and I didn’t use enough pressurewhich resulted in poor performance, particularly on thelarger drill sizes. I quickly learned that slowing the drilldown and increasing drill pressure whilst ensuringenough cutting grease had been applied enhanced thedrilling performance immensely. It used to frighten mewhen drilling stainless steel. NOT ANY MORE! Well doneyour Company!
DRILLING EXHAUST MANIFOLD STUDS
R Scott Martin
They are fabulous. I still haven’t had the time to use themfor their actual intended purpose – drilling out exhaustmanifold studs, but I did try them out on a couple of boltsto see how they did and was very impressed! Told abunch of my friends about them. Hoping to get a jointorder together. I want more sizes or one of the sets!
Our Client Reviews
www.ttp-hard-drills.com (UK) - www.ttp-hard-drills.net (USA)
DRILLING 10MM STAINLESS STEEL
Mr A. Prioleau
Having used the 3 mm version I knew this bit wouldhave no problem drilling into 10 mm stainless steel.It performed the task with ease. These are definitely thebest drill bits I have ever used.
DRILLING STAINLESS WITH 3MM &CUTTING PASTE
Steven EugeneRaiguel
I'd been having trouble drilling stainless steel, even withthe "best" bits from the local hardware store. On anInternet recommendation, I tried these. With a dab ofcutting paste, these drills will go through stainless theway most drills cut through soft metal, and cost muchless than those I was getting from the hardware store.
Our Client Reviews
DRILLING TENSILE BOLTS
JIM J
I was very happy with my purchase of the tough drill bits,they allowed me to drill out some broken off tensile boltsfrom a 25 year old motorbike cylinder head, failure in thiswould have meant finding a new head or abandoning theproject.
www.ttp-hard-drills.com (UK) - www.ttp-hard-drills.net (USA)
HAPPY TO RECOMMEND
GeorgeFairweather
Great buy. Have used drills from well knownmanufacturers, but these are better. Would recommendthem and will be using again.
DRILLING 1/2” PLATE STEEL
Steven EugeneRaiguel
The drill has drilled several holes through 0.25 inch platesteel and is still going strong!
Our Client Reviews
3MM SUCCEEDS WHEREOTHERS FAILED
Mr. JohnSpeakman
Could not have done job without these bits (drilling intoStainless steel) after no other bit would touch the job inhand and also got the job done quickly and neatly.
www.ttp-hard-drills.com (UK) - www.ttp-hard-drills.net (USA)
OUR CLIENT REVIEWS
CUTTING PASTE HELPS DRILLING
Robert Trinagle
Upon testing this product with various drill sizes intohardened angle iron steel. It worked GREAT - keep inmind when drilling into metal - DRILL SPEED can be yourenemy. Fast will burn the bit out even with the cuttinglubricant. Slow and Constant will get a clean and nicehole each and every time without blowing a bit for noreason. This is a nice find and addition to my tool bench
BEST METAL DRILL BITSI HAVE EVER USED
Jodie Schleicher
These are by far the best metal drill bits I have ever usedhands down. I hesitated to purchase these bits for awhile because of the price but finally pulled the triggerand I can say I was stupid for not buying them right away.If your thinking of buying these but are hesitant becauseof the price do yourself a favour and get them, you willsave time and money in the long run.
Our Client Reviews
LIKE A HOT KNIFE THROUGH BUTTER
USA Customer
Just to let everyone know these drill bits a BRILLIANT,it is the first time I have ever worked with metal andwas using titanium bits, managed 3 holes with 3 drillbits. Then I ordered ttp bits and were like a hot knifethrough butter. I was drilling 1cm hard steel and the jobwas so easy. Highly recomended. Don`t buy expensiveimmitations.
www.ttp-hard-drills.com (UK) - www.ttp-hard-drills.net (USA)
OUR CLIENT REVIEWS
DRILLING 6.8MM THICKSTAINLESS STEEL
Matthew Langley
These do the job. Out of the package their only goodfor about 15-20 holes, when drilling through 6.8mmthick stainless steel, that's using cutting lube too.After that they have to be sharpened. After re-sharpeningthey usually are good for an additional 10-15 holesbefore having to re-sharpen again. Would buy themagain.
DRILLING THROUGH HARDENEDBAR STOCK
Brian Watts
These drills perform exceptionally well. They're farsuperior to anything I can buy locally. Delivery isextremely fast. I was able to finish drilling a 3/8" holethrough 1-1/4" hardened bar stock. I must have gonethrough a dozen conventional cobalt bits beforepurchasing this kit. Love ‘em.
Our Client Reviews
DRILLING HARDENED SEAT BOLT
Michael Esplin
Had to drill out a hardened seat bolt from my Jeep,worked perfectly.
www.ttp-hard-drills.com (UK) - www.ttp-hard-drills.net (USA)
OUR CLIENT REVIEWS
DRILLING OVERHEAD WITHCUTTING PASTE
Kim Tate
I recently did large diameter drilling thru 1/4 inch plateabove my head and needed a cutting lubricant thatwould stay in place. Cut-It performed very well in stayingon my low rpm drill bit. The large diameter drill bit stayedcool and cut well. Highly recommend Cut-It paste.
DRILLING STAINLESS STEEL WITH EASE
Mich
I just used my new 4.2mm bit to drill a hole into stainlesssteel tube (to be used for a stair railing). The TTP bitworked beautifully. This is a terrific product at anexcellent price.
Our Client Reviews
BREEZED THROUGH GRADE 8 BOLT
Robert Sacklow
I've been at this a long time and I have never seen bitsthis good. On my test, they breezed through gr 8 bolton the press with cut oil. When I tested with the cord drill,I found that you could break the bit if you werentperfectly square. On the car with the broken exhauststud, it was fantastic, they bite like crazy. I’m going togive them as gifts to my wrenching friends.
BUY ONLINE
www.ttp-hard-drills.com
www.ttp-hard-drills.net
www.ttp-hard-drills.com (UK) - www.ttp-hard-drills.net (USA)
20% DISCOUNT with voucher code TRADE20 at checkout