Clip Art GuideThe clip art has been organized into folders. If you choose to install the clip art from the disk then by default it will be located in your “My Documents” folder

Copyright © 2015 Vectric Ltd. All Rights Reserved

Clip Art Guide

An overview and catalog of the Clip Art files included with Aspire V8.5

Vectric Ltd. Document V.1.0

Contents

Overview ................................................................................................................................................. 4

Vector Art 3D Models ..................................................................................................................... 4

Guide to the File Names.......................................................................................................................... 5

*.3DCLIP .......................................................................................................................................... 5

-X ..................................................................................................................................................... 5

*.CRV3D .......................................................................................................................................... 5

-V ..................................................................................................................................................... 5

*.V3M .............................................................................................................................................. 5

*.CRV ............................................................................................................................................... 5

Guide to the Folders ............................................................................................................................... 6

2D Vectors ....................................................................................................................................... 6

Animals ............................................................................................................................................ 6

Borders ............................................................................................................................................ 6

Decorative ....................................................................................................................................... 6

Domes (Dishes) ............................................................................................................................... 6

Objects & People............................................................................................................................. 6

Panels & Shields .............................................................................................................................. 7

Plants & Fruit .................................................................................................................................. 7

Ribbons (Banners) ........................................................................................................................... 7

Texture Area Tiles ........................................................................................................................... 7

Textures (Not Tilable)...................................................................................................................... 7

Weaves ............................................................................................................................................ 7

2D Vectors Catalog .................................................................................................................................. 8

2D Vectors Catalog (2) ............................................................................................................................ 9

2D Vectors Catalog (3) .......................................................................................................................... 10




Animals Catalog .................................................................................................................................... 14

Animals Catalog (2) ............................................................................................................................... 15

Animals Catalog (3) ............................................................................................................................... 16

Animals Catalog (4) ............................................................................................................................... 17

Border Catalog ...................................................................................................................................... 18

Decorative Catalog ................................................................................................................................ 19

Decorative Catalog (2) .......................................................................................................................... 20





Domes (Dishes) Catalog ........................................................................................................................ 25

Objects & People Catalog ..................................................................................................................... 26

Objects & People Catalog (2) ................................................................................................................ 27




Panels & Shields Catalog ....................................................................................................................... 31

Panels & Shields Catalog (2) .................................................................................................................. 32





Plants & Fruit Catalog ........................................................................................................................... 37

Ribbons (Banners) Catalog .................................................................................................................... 38

Texture Area Tiles ........................................................................................................................... 39

Textures Area Tiles (2) .......................................................................................................................... 40

Textures Catalog ................................................................................................................................... 41

Textures Catalog (2) .............................................................................................................................. 42

Weaves Catalog ..................................................................................................................................... 43

Weaves Catalog (2) ............................................................................................................................... 44

Weaves Catalog (3) ............................................................................................................................... 45

License Agreement................................................................................................................................ 46

Overview

IMPORTANT: All the clipart supplied with Vectric Software is subject to the License

Agreement shown at the end of this document. You must agree to this before using any of

the files included on the disk.

The software is supplied with a large selection of 2D and 3D clipart files. These can be utilized as is,

to carve the designs on your CNC or can be edited and used as elements in more complex parts. In

this document we will provide a guide to the included clipart, information on the different types of

files and how they can be used as well as a catalog showing you images and names for each one.

Note: If you are new to Vectric software, the relevance of some of this information may not be

100% clear at this stage. As you progress through the tutorials and start to understand more about

the file-types and how the modeling tools function then you will be able to see how the clipart

discussed here is not just valuable as a source of artwork but also how some of the files can be

used as a learning aid and as a basis to create your own variations to the originals.

Vector Art 3D Models

Many of the models included with the software are supplied by Vector Art 3D, Inc. Each of their

models is supplied in 3 styles; A – Regular, B – Dished and C – Recessed. The A, B and C are indicated

as a suffix in the file names. You can see an example of each these styles in the image below. In the

catalog in this document we will not show all three styles but will indicate which models include

these variations.

A - Regular

B - Dished

C - Recessed (faux hand carved edge)

Vector Art 3D have over 2000 other high quality clip art models to choose from on their website

http://www.vectorart3d.com. We recommend the V3M file format for use with the Software.

Note: When you setup an account on the Vector Art 3D website there is an area to indicate which

version of the software you own. By entering this information it will ensure that the models on the

site that are included with your version will be tagged. This means when browsing the site if logged

into your account you can see these files and avoid buying duplicates. If you already have an

account just go to the “Edit Your Account” option after logging in to turn on this option.

http://www.vectorart3d.com/

Guide to the File Names

The clipart is provided in different file types as detailed below, we have also used certain naming

conventions to help indicate files with particular properties which are also discussed on this page:

*.3DCLIP

Files with this extension contain only 3D data; they can be imported into an active session of the

software from the Import a component or 3D model icon on the modeling tab or dragged and

dropped into the 2D or 3D view either from the 3D Clipart Tab or a file folder on your PC.

A 3DCLIP file may contain a single component or may be a group of components that can be

ungrouped after import to access its original constituent pieces.

-X

The “-X” suffix on a 3DCLIP file name indicates that it contains a group of individual

components that make up the model, files without this indicate that they contain just a

single component. The –X files can be a useful teaching aid to see how individual pieces can

be used to make a more complex finished part.

*.CRV3D

Files with this extension may contain 2D and 3D data; they can be opened directly in Aspire as a new

file. In addition they can also be imported into an active session of Aspire either by using the Import

vectors from a file icon on the drawing tab (to import 2D data) or by using the Import a

component or 3D model icon on the modeling tab (to import the 3D data).

These files can also be dragged and dropped into the 2D view either from the 3D Clipart Tab or a file

folder on your PC. By default when you drag and drop a CRV3D file that contains both 2D and 3D

data the 3D data will be imported. Holding Shift down when dragging and dropping a CRV3D file will

ensure that the vectors are imported rather than the 3D.

Importing 3D data from a CRV3D file will bring it in as a single component. Importing 2D data will

lose the layer information in the file and bring it all in on the active layer.

-V

The “-V” suffix in a CRV3D file name indicates that it contains 2D vector data, this may be on

multiple Layers, so you should check the Layer Tab when opening these files.

*.V3M

V3M files contain exclusively 3D data and will be imported as a single component that can be edited

in the software.

*.CRV

Files with this extension contain only 2D vector data; they can be opened as a new file in the

software. They can also be imported into an active session using the Import vectors from a file icon

on the drawing tab or dragged and dropped into the 2D view either from the Clipart Tab or a file

folder on your PC.

Guide to the Folders

The clip art has been organized into folders. If you choose to install the clip art from the disk then by

default it will be located in your “My Documents” folder under a sub-folder called “Vectric Files”.

Below you can read an overview of the files you will find in each folder and on the following pages

you can see a catalog containing the name and an image for each file.

2D Vectors

This folder includes 110 CRV files that contain 2D vector shapes. Many of these

are single outline versions of the panels and shields in the “Panels & Shields”

folder but there is also a small selection of other vector shapes as well. These

vectors are approximately 12” (300mm) in their longest dimension.

Animals

This folder contains a mix of Animal themed models in 3DCLIP and V3M file

format. There are 45 Vector Art 3D models (all three styles) and 21 other

individual models for a total of 156 files.

Borders

This folder contains a selection of border shapes in 3DCLIP and V3M file format.

There are 7 Vector Art 3D models (all three styles) and 10 other individual models

for a total of 31 files. Within the files there are individual rope and chain link

components which can be used to create your own border variations.

Decorative

This folder contains a large selection of decorative flourishes suitable for many

traditional woodworking applications. There are 61 Vector Art 3D models (all

three styles) and 60 other individual models for a total of 244 files in 3DCLIP and

V3M file format.

Domes (Dishes)

This folder contains a set of Domes/Dishes. There are 10 files in V3M file format.

Objects & People

This folder contains a large set of pictorial models. There are 29 Vector Art 3D

models (all three styles) and 60 other individual models for a total of 147 files in

3DCLIP and V3M file format.

Panels & Shields

This folder contains 90 panel shapes, 1 Vector Art 3D Panel (all three styles) and 10

shields. For each shape there are 4 versions, one CRV3D and three 3DCLIP or V3M

files. The CRV3D all contain the 2D data that was used to create the 3D models

(drive rails and cross sections for Two Rail Sweep) These vector files could be used

to edit and create your own variations of the panel. The three 3DCLIP files are

individual models that contain a variant of the panel with a different edge style, these have the

suffix: -i, -ii and –iii in the file names. In total this folder contains 403 files. These models are

approximately 12” (300mm) in their longest dimension.

Plants & Fruit

This folder contains a mix of models with different plants, trees and fruit in them.

There are 15 Vector Art 3D models (all three styles) and 1 other individual model

for a total of 46 files in 3DCLIP and V3M file format.

Ribbons (Banners)

This folder contains 13 ribbon and banner shapes. There are 2 Vector Art 3D

models (all three styles) and 11 other individual files. Nine of the files in this folder

are CRV3D files that contain the 2D data that was used to create the models and

they could also be easily edited to create variations. In total this folder contains 19

files.

Texture Area Tiles

This folder is a selection of 40 3DCLIP files that are specially created for use in the

Create Texture Area tool. These mainly fall into two types of shape, those that go

to the edge of the square and those that don’t. The ones that go to the edge of the

square tile area are designed to be tiled seamlessly. The shapes that don’t go to the

edge are designed to be manipulated with the modifying options on the form to

achieve different results.

Textures (Not Tilable)

This folder is a selection of 60 3DCLIP files that can be imported and cropped to

create background textures for your designs. These textures are not designed to be

tiled so do not match if arrayed edge to edge but they can be imported and re-

sized. When imported the standard size for these textures is approximately 48” x

24” x 0.3” (1200mm x 600mm x 8mm). The preview images for these models are

blue.

Weaves

This folder contains 50 weave designs. For each shape there are 4 versions, one

CRV3D and three 3DCLIP or V3M files. The CRV3D all contain the 2D data that was

used to create the 3D models (drive rail and cross sections for use with the Extrude

& Weave function). These vector files could be used to edit and create your own

variations of the weave. The three 3DCLIP and V3M files are individual models that contain a variant

of each weave with a different cross section profile, these have the suffix: -i, -ii and –iii in the file

names. Most of these models are approximately 14” (350mm) in their longest dimension.

2D Vectors Catalog

Bone Bottle House Jigsaw

Keyhole

Light bulb

Panel 1 Panel 2

Panel 3 Panel 4 Panel 5 Panel 6

Panel 7

Panel 8

Panel 9 Panel 10

Panel 11

Panel 12

Panel 13 Panel 14

2D Vectors Catalog (2)

Panel 15

Panel 16

Panel 17 Panel 18

Panel 19

Panel 20

Panel 21 Panel 22

Panel 23

Panel 24

Panel 25 Panel 26

Panel 27

Panel 28 Panel 29 Panel 30
















Panel 78 Panel 79

Panel 80 Panel 81



Panel 90 Rosette

Shield 1 Shield 2


Shield 3 Shield 4 Shield 5 Shield 6

Shield 7 Shield 8 Shield 9 Shield 10

Sign Blank 1 Sign Blank 2 Wrench

Animals Catalog

Alligator-57705

(3 styles) Bald_Eagle-50000

(3 styles) Bass-50034

(3 styles) Blue_Heron_2-50276

(3 styles)

Bulldog Head Cartoon Canadian_Goose-50067 (3 styles)

Cantering_Arabian-50099 (3 styles)

Caribou_Reindeer-57546 (3 styles)

Carousel_Horse_2-50640

(3 styles) Carousel_Lion-50639

(3 Styles) Cat Head Cartoon 1

(Components) Cat Head Cartoon 2

(Components)

Chinese_Dragon-50234

(3 styles) Coyote-57760

(3 styles) Deer_Fawn_1-57333

(3 styles) Deer_Scene-50052

(3 styles)

Deer-50005 (3 styles)

Dog Head Cartoon 1 (Components)



Animals Catalog (2)

Dove & Heart 1 (Components)

Dove & Heart 2 (Components)

Dove Dragon_3-57633 (3 styles)

Duck_3-57246 (3 Styles)

Eagle on Rock Eagle_Head-50218 (3 Styles)

Fish_Shellfish-57852 (3 Styles)

Frog_2-58195 (3 Styles)

Gorilla-50008 (3 Styles)

Gryphon-57616 (3 Styles)

Heron-Shell Sign

Horse Cantering Horse Head UG Horse Running

Horse Trotting

Horse_Head_3-50100

(3 Styles) Horse_Head_5-50441

(3 Styles) Hunting_Dog-50066

(3 Styles) Kitten_2-57699

(3 Styles)

Animals Catalog (3)

Leaping_Bass-50078

(3 Styles) Lion_3-58284

(3 Styles) Live Bait Sign Marine Corps Bulldog

(Components)

Octopus-50459 (3 Styles)

Ornamental_Lion-50295 (3 Styles)

Pelican_3-57700 (3 Styles)

Pig Head Cartoon

Piglet_1-57897

(3 Styles) Quarter_Horse-50101

(3 Styles) Rabbit-50046

(3 Styles) Reindeer Cartoon

(Components)

Rooster3-50731

(3 Styles) Sea_Horse-50017

(3 styles) Seagull-50614

(3 Styles) Sleepy_Mouse-50431

(3 Styles)

Squirrel_on_Branch-57688 (3 Styles)

Stable Sign (Components)

Standing_Bear-50079 (3 Styles)

Swordfish-50513 (3 styles)

Animals Catalog (4)

Teddy Bear (Components)

Toucan-50724 (3 Styles)

Tropical_Fish-50007 (3 Styles)

Wading_Moose_2-50603 (3 Styles)

Whale_3-57632 (3 styles)

Wolf_2-57630 (3 styles)

Border Catalog

Barbed_Wire_1-50237

(3 styles) Barbed_Wire_2-50348

(3 styles) Barbed_Wire_3-57372

(3 styles) Barbed_Wire_Heart-57168

(3 styles)

Chain Circle (Components)

Chain Links (Components)

Chain Rectangle (Components)

Rope Border 1

Rope Border 2 Rope Border Loop

Rope Border Mitre Rope Circle

Rope Link

Rope Rectangle

Rope_Border_3-50245 (3 styles)

Rope_Border-50094 (3 styles)

Rope_Oval-50198 (3 styles)

Decorative Catalog

Acanthus Acanthus_Vertical_3-57693 (3 styles)

Artist_Tools_Flourish-57529 (3 styles)

Cartouche_5-57449 (3 styles)

Cartouche_6-57586 (3 styles)

Celtic Cross (Components)

Circle_Surround-57754 (3 styles)

Coat_of_Arms_5-57694 (3 styles)

Corbel Front & Sides (Components)

Corner Post (Components)

Crown_1-57712 (3 styles)

C-Scroll-Cross

C-Scroll

(Components) Decorative Window Decorative_Circle_1-50290

(3 Styles) Decorative_Circle_2-50642

(3 Styles)

Decorative_Circle_3-50643

(3 Styles) Egg and Dart (Components)

Fleur_de_Lys1

Fleur_de_Lys1 (Components)

Decorative Catalog (2)



Floral_Drop_Bow-50379 (3 styles)

Floral_Swag-50375 (3 styles)

Flourish 101-1 (Components)


Flourish 101-3









Flourish 101-12

Flourish 101-13


Flourish 101-15



Flourish 101-17




Flourish 101-21

Flourish 101-22



Flourish Repeat 1 Flourish Repeat 2 Flourish Repeat 3 Flourish Repeat 4

Flourish Repeat 5 Flourish_73B-57340 (3 styles)

Flourish_74B-57342 (3 styles)

Flourish_75-57344 (3 styles)

Flourish_76B-57347

(3 styles) Flourish_79A-57358

(3 styles) Flourish_80B-57367

(3 styles) Flourish_80C-57368

(3 styles)


Flourish_85A-57401 (3 styles)



Flourish_89C-57436 (3 styles)

Flourish_90A-57440

(3 styles) Flourish_92B-57446

(3 styles) Flourish_95C-57463


(3 styles)











Flourish_142D-57730 (3 styles)



Flourish_158-57822

(3 styles) Flourish_199-58148

(3 Styles) Flourish_202-58151


(3 styles)




Flower UG

Flower Heart_Flourish_2-58299

(3 styles) Laurel_Wreath-50445

(3 styles) Leaf Circle UG

Leaf Curves Flourish (Components)

Leaf Flourish End Leaf Molding Short (Components)

Leaf Molding (Components)

Leaf_Flourish-57270

(3 styles) Leaf-Cluster 1 Linenfold UG

(Components) Linenfold UG


Oak_Mantel-57128

(3 styles)

Ornamental_Border_16-57750 (3 styles)

Rosette 1 (Components)

Rosette 2



Rosette_2-50362 (3 styles)

Round_Flourish_1-50083 (3 styles)

Scallop_Shell-50186

(3 styles) Shell Flourish (Components)

Shell Simple_Laurel_Wreath

Square_Rosette_3-57604 (3 styles)

Swag_&_Ribbons_2-57470 (3 styles)

Swag_Ribbon_1-50300 (3 Styles)

Three_Feathers-57759 (3 Styles)

Vertical_Flourish_1-50084 (3 styles)

Vertical_Panel_1-50296 (3 Styles)

Wave Wing_1-50415 (3 styles)

Domes (Dishes) Catalog

Dome Dish 30

Dome Dish 45 Dome Dish 60

Dome Dish 90

Flat Rectangle 1

Flat Round Circle

Flat Round Oval 1 Flat Round Oval 2

Flat Square

Objects & People Catalog

Anchor_2-50452

(3 styles) Anonymous Statue Baluster

(Components) Baseball-50351

(3 styles)

Beer Mug

Beer Mug (Components)

Bones Bottle_Cap-50587 (3 styles)

Box and Lid Box

(Components) Bright Idea (3 Styles)

Carvers_Tools-50435 (3 styles)

Cherub_3-50630 (3 styles)

Christmas Bells

Christmas Bells (Components)

Christmas Candle (Components)

Christmas Candy Cane (Components)

Christmas Decorations (Components)

Christmas Stocking (Components)

Coffee Cup (Components)

Objects & People Catalog (2)

Coffee Mug

(Components) Coffee to Go

Comedy Mask Finished Dice-50688

(3 styles)

Diploma-50544

(3 styles) Discobolus-57896

(3 styles) Drum

(Components) Flower_Maiden-57702

(3 Styles)

Football_50352

(3 Styles) George Washington Gingerbread Man

(Components) Golf Ball & Tee (Components)

Golf-Ball-&-Tee

Graduation_Cap-50545

(3 Styles) Hat Heart & Banner

(Components)

Heart Pair

(Components) Heart

Heart Pair

Helmet_Plumes-50412

(3 styles)


Ice Cream 1

(Components) Ice Cream 2



Instrument Scroll Jack in Box (Components)

Lobster_Boat-57716 (3 Styles)

Log Cabin

Mail_Bugle-50478

(3 Styles) Mans_Watch-50485

(3 Styles) Maple Sign

(Components) Mona Lisa

Mushroom 1

(Components) Mushroom 2

(Components) Mushroom 3

(Components) Mushroom Group

Mushroom Plaque Mustang P51

Open Book

Paint_Brush-50192

(3 Styles)


Painting_Fairy-57703

(3 Styles) Parchment

Perfect Pies Sign

Pick-57767 (3 Styles)

Pointing Finger 1 Pointing Finger 2 Rod_of_Asclepius-57646

(3 Styles) Santa Head

Scroll-50355

(3 Styles) Scroll

(Components) Ships_Wheel-50075

(3 Styles) Shovel-57768

(3 Styles)

Skull X-Bones (components)

Skull Skull_&_Cross_Bones_2-50270 (3 Styles)

Snow Man (Components)

Soccer_Ball-50350 (3 Styles)

Theatre Masks Toy Blocks (Components)

Toy_Blocks_5-50703 (3 Styles)


Toy_Blocks_6-50702 (3 Styles)

Tragedy Mask Finished

US Belt Buckle (Components)

US Belt Buckle Texture (Components)

Wedding Rings (Components)

Wedding Rings

Witch_on_Broom-57749 (3 Styles)

Wizard-57755 (3 Styles)

Panels & Shields Catalog

Panel 1

Panel 2 Panel 3 Panel 4





All models shown in the Panels and Shields section are provided in 3 variants, each with a different edge profile in addition to a file that includes the vectors used to create them

Panels & Shields Catalog (2)





















Panel 89

Panel 90 Scroll_Sign_Panel_1-50535

(3 Styles) Shield 1

Shield 2

Shield 3 Shield 4 Shield 5

Shield 6

Shield 7 Shield 8 Shield 9


Shield 10

Plants & Fruit Catalog

Apple-50353

(3 Styles) Cat_Tails-50232

(3 Styles) Double_Grapes-50216

(3 Styles) Figs 50531 (3 Styles)

Fir_Tree-50641 (3 Styles)

Fir_Trees_5-50651 (3 Styles)

Flower_Flourish-57277-A (3 Styles)

Grape_Leaf-50602 (3 Styles)

Grapes (Components)

Lily_Bunch_2-57845 (3 Styles)

Lotus_Flourish_B-58338 (3 Styles)

Magnolia_Flower-57649 (3 Styles)

Maple_Leaf-50146 (3 Styles)

Ornate_Fruit_in_Bowl-57621 (3 Styles)

Palm_Tree_2-50520 (3 Styles)

Rose_3-57190 (3 Styles)

Ribbons (Banners) Catalog

Banner Banner_9-50405 (3 Styles)

Banner_11-50414 (3 Styles)

Banner (Components)

Ribbon 1

(Vectors and Components) Ribbon 2



Ribbon 4 (Vectors and Components)





Ribbon 9


Texture Area Tiles

Block_Wall1 Bow_Circle Bow_Circle2 Bow_Circle3

Bow_Circle4 Bow_Circle5 Bow_Circle5 Celtic_Weave1

Diamond_Plate1 Domed_Pyramid Domed_Pyramid_Middle_In

vert Domed_Pyramid_Scallop1

Domed_Pyramid_Scallop2 Egg_Web1 Ornament1 Ornament2

Ridges1 Rock-Grain1 Roof_Tile1 Roof_Tile2

Textures Area Tiles (2)

Rough_Weave1 Scallops1 Square_Angles1 Square_Star1

Square_Wave1 Square_Wave2 Square_Wave3 Square_Wave4

Square_Wave5 Square_Wave6 Stones_Smooth1 Tri_Shape1

Wave_Tile1 Wave_Tile2 Wave_Tile3 Wave_Tile4

Wave_Tile5 Wave_Tile6 Weave_Diamond1 Wooden_Planks1

Textures Catalog

Bark 1 Bark 2 Bark 3 Basket 1

Basket 2 Bush 1

Bush 2 Bush 3

Checkerboard Mesa

Clouds 1

Cracked Earth Folds 1

Folds 2

Fossil 1

Fossil 2 Fossil 3

Fossil 4 Grain 1

Grain 2 Grain 3

Grain 4

Grain 5 Grain 6 Grain 7

Grain 8 Grain 9 Grain 10 Grain 11

Grain 12 Grass 1

Grass 2 Grass 3

Textures Catalog (2)

Gravel

Leaf 1

Leaf 2 Leaves 1

Leaves 2 Leaves 3 Leaves 4 Leaves 5

Leaves 6 Rock 1

Rock 2 Rock 3

Rock 4 Rock 5 Rock 6 Rock 7

Rock 8 Sand 1

Shells 1 Sticks 1

Sticks 2

Stones

Wall 1 Wall 2

Water

Wave 1

Wave 2 Weave

Weaves Catalog

Weave1 Weave 2 Weave 3 Weave 4

Weave 5 Weave 6 Weave 7 Weave 8




Weaves Catalog (2)






Weaves Catalog (3)



Weave 49 Weave 50

All models shown in the Weave section are provided in 3 variants, each with a different cross section profile in addition to a file that includes the vectors used to create them

License Agreement

You, the end user, agree to be bound by the terms of this agreement. The Files on the disk are

copyright Vectric Ltd. and Vector Art 3D Inc. and your rights are subject to the limitations and

restrictions imposed by the copyright laws of the United States and international copyright treaties.

The term “Files” includes items with the file extension CRV, CRV3D, 3DCLIP, V3M and any other

format supplied on the software disk or as downloaded files from Vectric Ltd. or Vector Art 3D.

License Agreement

Vectric Ltd. and Vector Art 3D, Inc. grant you a non-exclusive limited license to use the computer

models as decorative or illustrative material that is included as part of, or all of a CNC carved part or

an object grown on a 3D Printer, produced for you, your employer, or a client. There is no limit on

how many times a model can be made and the finished part sold as long as each part is individually

carved or 3D-printed. You may not use any of the models in whole or in part to create a tool or

master-model which can be used for casting, molding or other mass production methods.

Files of national or organizational insignia are protected by various laws against misuse. Typically, all

logos, insignia, seals, flags etc. are for official use only. It is your responsibility to obey all laws

regulating the production and display of these.

It is against the law to copy, reproduce, or transmit (including, without limitation, electronic

transmission) part or whole of any of the Files except as permitted by the Copyright Act of the

United States. Under the law, copying includes translating into another language or format. You

many not under any conditions copy original or altered Files or images to sell or distribute to others

other than as a carved or grown part as detailed above. The purchase or use of the Files does not, in

any way, transfer ownership or rights to contents, in whole or in part, to you.

Copyright

The Files are copyrighted by Vectric Ltd. and Vector Art 3D, Inc. with all rights reserved. Under

copyright law, the Files may not be copied, in whole or in part, without written permission of Vectric

Ltd.

Limited Warranty

Vectric Ltd. and Vector Art 3D, Inc. do not and cannot warrant the performance or results you may

obtain by using the Files or other content. Vectric Ltd. and Vector Art 3D, Inc. make no warranties

express or implied, as to the non-infringement of the third party rights or fitness for any particular

purpose.

Limitation of Liability

In no event will Vectric Ltd. or Vector Art 3D, Inc. be liable to you for any consequential, incidental,

or special damages, including lost profits or savings. This warranty gives you specific rights, and you

may also have other rights which vary from state to state. Some states do not allow the exclusion of

consequential, incidental or special damages, so the above limitation or exclusion may not apply to

you.