Clue Machinery - April 2016 Issue

M A C H I N E R Y

APRIL 2016Volume 31 Number 4Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.comemail: [email protected]

Ontario and Eastern Canada:Showroom & Training Centre10 Natura Way, Cambridge, ON N3C 0G7

Western Canada:Westside Service Ltd.122 Broxburn Blvd.Lethbridge, AB T1J 4P4

toll-free # 1-877-337-7424 | [email protected]

www.ferricmachinery.com

Your One Stop Machine ShopIn stock for immediate delivery: Press brakes, Shears, Plate Rolls, Lasers, Saws, Ironworkers, Angle

Notchers, Punch Presses, Plasma Cutting Centers and more..

PROFILE ROLLS

PRESS BRAKES

PUNCH PRESSES

PLASMA CUTTING CENTERS

SHEARS

PLATE ROLLS

FIBER LASERS

16May_Ferric_Bending.indd 1 2016-03-29 4:50 PM

Quality . Service . Value SAWS

Page 2 Clue April, 2016

PRE-OWNED MATSUURA V.PLUS-1000 VERTICAL MACHINING CENTER

YCM TCV3000A-5AF 5 AXES (3+2)

HIGH PERFORMANCE TRAVELING COLUMN VERTICAL MACHINING CENTER

SPINDLE: 12,000 RPM (20/25/29.5 HP) X-AXIS TRAVEL: 3,000mm (118.1”) Y-AXIS TRAVEL: 800mm (31.5”) Z-AXIS TRAVEL: 800mm (31.5”) TABLE SIZE: 3,500 X 800mm (137.8” x 31.5”) B-AXIS (HEAD): +/- 110 degrees C-AXIS (TABLE): 360,000 (0.001 degrees) ATC: 40 POSITIONS

ACCESSORIES: CHIP CONVEYOR 300 PSI COOLANT THROUGH SPINDLE DATA SERVER WITH ETHERNET (4GB) PROBES: RENISHAW NC-4 & RMP-40

PRE-OWNED 2013 MODEL COMMISSIONED IN 2014 WITH ONLY 250 CUTTING HOURS!!

Elliott-Matsuura Canada Inc. 2120 Buckingham Road, Oakville, ON, L6H 5X2

Tel: 905.829.2211 Fax: 905.829.5600 E-mail: [email protected]

Web: www.elliottmachinery.com

VANCOUVER * CALGARY * EDMONTON * WINNIPEG * TORONTO * MONTREAL * QUEBEC

CALL ELLIOTT DIRECT AT 905.829.2211 SPEAK WITH FRANK HAYDAR, FRANK BOLIEIRO, VINCE D’ALESSIO, OR TIM FRANKLIN

PRE-OWNED NAKAMURA WT250IIS MULTI SPINDLES / MULTI TURRETS

12,000 RPM / 30 HP / 40 ATC / TURBO MICROHINGE 500 CHIP CONVEYOR / TSUDAKOMA RZ-160 INDEXER /

FANUC SOFTWARE PACKAGE / HANDYMAN

L&R SPINDLES: 65mm BAR CAPACITY / FIVE AXIS / PARTS CATCHER A / TOOL SETTER / REAR DISCHARGE CONVEYOR / HAINBUCH SPANNTOP COLLET CHUCKS

Ontario and Eastern Canada:Showroom & Training Centre10 Natura Way, Cambridge, ON N3C 0G7

Western Canada:Westside Service Ltd.122 Broxburn Blvd.Lethbridge, AB T1J 4P4

toll-free # 1-877-337-7424 | [email protected]

www.ferricmachinery.com

Your One Stop Machine ShopIn stock for immediate delivery: Press brakes, Shears, Plate Rolls, Lasers, Saws, Ironworkers, Angle

Notchers, Punch Presses, Plasma Cutting Centers and more..

PROFILE ROLLS

PRESS BRAKES

PUNCH PRESSES

PLASMA CUTTING CENTERS

SHEARS

PLATE ROLLS

FIBER LASERS

16May_Ferric_Bending.indd 1 2016-03-29 4:50 PM

Quality . Service . Value SAWS

Clue April, 2016 Page 3

PAGE 4 CLUE, April 2016

63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada

Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com

AIR COMPRESSORS5hp CAMERON, Piston type25hp DEVILBISS, Piston Type, 575V

BENDERS, HYDRAULIC5-1/2" ENERPAC, Hyd. Pipe bender, w/assisted tooling

BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i

BRAKES, PRESS30 to 3000 Ton “NEW” ACCURPRESS Models CNC20 Ton x 4’ WYSONG, Mech. Automec CNC single axis backgauge35 Ton x 6’ ALLSTEEL, No. 35-6, Manual BG45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R, Crowning, Laser safety45 Ton x 8’ ALLSTEEL, Automec CNC 99, Single axis backgauge50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC Touch screen55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis60 Ton x 8’ ACCURPRESS, No.7608, Autogauge G24 Backgauge, ETS100 Ram65 Ton x 6’ ALLSTEEL, No. 6508 (2001), Automec single axis, BG70 Ton x 10’ ALLSTEEL, Hyd.75 Ton x 10’ “NEW” ACCURPRESS, CNC95 Ton x 8’ ALLSTEEL, Allsteel 2-axis CNC BG100 Ton x 6’ ACCURPRESS, 71006, ETS3000, 3-Axis, X,Y,R110 Ton x 10’ AMADA, RG100 (1998), NC-9EXII Ctrl, Safety lights120 Ton x 8’ ALLSTEEL, CNC, Single-Axis Gauge130 Ton x 10’ “NEW” ACCURPRESS, CNC200 Ton x 12’ “NEW” ACCURPRESS, CNC250 Ton x 12’ “NEW” ACCURPRESS, CNC750 Ton x 16’ CHICAGO, Hyd. CNC Automec 2-Axis, Safety lights, Guarding

DRILLS, COLUMN & BENCH1-3/8"cap “NEW” DRILLMASTER, Z5035, Geared Head

DRILLS, RADIAL3’ arm “NEW” TONE FAN, RD-9003’ arm SUNLIKE, 1500rpm, w/work table4’ arm DARBERT, TF-1100 (2003)9’ arm SHENYANG, Box table

EDM, WIRE NC/CNCX-23.6" Y-15.7" Z-16.5" MITSUBISHI, MV-2400-ST (2013), CNC Wire EDM

GRINDERS, CYLINDRICAL12"x 40" KIKINDA, w/I.D. Grinding

GRINDERS, SURFACE, RECIPROC6" x 18" “NEW” KENT, KGS-2008"x 18" FREJOTH, Automatic, Hyd.10"x 20" ACER, 3-Axis, Fully Auto, Hyd. Coolant12"x 24" OKAMOTO (2007), CNC, Fanuc 21MB

HONESSUNNEN, MBC-1804M & MBC-1802MR, Power Stroke, Horiz.SUNNEN, MBB-1660K, ManualSUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet

PRESSES, INSERTION4 Ton HAEGER, w/Stand8 Ton PEMSERTER, Series 2000 (2002), PLC control

IRONWORKERS55 Ton “NEW” MAKO, Universal, 5"x 5"x 3/8" angle

LASERS2000 Watt - 33 Ton AMADA, ApelioIII, 375V, Hyd Punch/Laser Machine5000 Watt TRUMPF, L3050 (2005), 5’ x 10’

LATHES, ENGINE12" x 40" “NEW” MORTON, F1900-AEG (2001), Single Phase13"x 40" HARRISON, Collet chuck, 2-Axis DRO14"x 40" LIBERTY 1300, 6" 3-Jaw18" x 60" “NEW” POWERTURN, 46020"x 48" VDF, 10" 3-Jaw chk63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe

LATHES, N/C & CNCDMG, CTX 410 (2008), Live tool, Fanuc 32, Excellent!HAAS, SL-20T (2005), 8"chk, Part Catch, Chip AugerOKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar capMORI SEIKI, SL150S (1997)MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live holders, C&Y Mill capHAAS, SL-20 (2005), Live ToolROMI, M17 (2007), 17"x 43", Fanuc 21i, 8"ChkTOOLMEX, TUR560MN-2000 (2012), 22"x 78.7", Siemens 840D, 16" Chk.TOOLMEX, TUR630AMN-3000 (2008), 24.8"x 118", Siemens 840D, 16” Chk.

HYUNDAI, L300 LA (2013), 29.5"SW, 52" Mach. Length, Fanuc Oi-TD, High Accuracy, HighProduction, 12"Chk

MACHINING CTRS, HORZOKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000

MACHINING CTRS, VERTHAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpmFADAL, VMC40, X-22" Y-16" Z-20", CNC 88 CtrlOKUMA, No.MX-45 VAE (1998), X-30" Y-18.1" Z-17.7", 40 Taper, OSP 700MIKRON, HSM-600U (2006), X-31.4" Y-23.6" Z-19.7", 5-Axis high speedMAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5 CNC, 13,000 rpmMILLTRONICS, RH20 (2000), X-40" Y-20" Z-24", Centurion 6 controlOKK, MCV-560 (2001), X-41.3" Y-22.04" Z-22.04", Fanuc 16iM, CTS, 50 tap.HURCO (2013), 5-Axis, X-42" Y-24" Z-24"HAAS, VF-5 (2013), X-50" Y-26" Z-32", 50 TaperDAHLIH, MCV-1500 (1996), X-59" Y-24" Z-27", 3500rpmDAHLIH, MCV-1700, X-67" Y-33" Z-29", 3500/6000rpm, 1997

MILLS, VERTICAL9"x 42/48" BRIDGEPORT, w/Fagor DRO9" x 49" "NEW" MAGNUM-CUT, VM-2V, 3hp9"x 49" EXCELLO, 60210"x 50" TOPWELL, No.3VK, 2-Axis Anilam DRO, Power Drawbar10" x 54" "NEW" MAGNUM-CUT, VM-4V, 40 Taper, 5hp12"x 51" TOS, FNK2 (1999), DRO, P/F, V/S

MILLS, VERTICAL, CNC9"x 49" BRIDGEPORT, Acu-Rite MillPower 3-Axis CNC, R8 Taper10"x 50" SOUTHWESTERN INDUSTRIES, TRAK K3 (2002)12"x 51" TOS, FV25 CNC A (2004), 3-Axis, Fagor 800M CNC Ctrl

NOTCHING MACHINES9"x 9"x 1/8" STRIPPIT, Hyd.

PLASMA CUTTING MACHINES100 Amp MESSER MG (2000), 6’x 10’, Hy-Definition, CNC plasma, Metalmaster II

PRESSES, OBI40 Ton BROWN BOGGS, Air Assist Clutch80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed

PUNCHES, SINGLE STATION60 Ton FABMASTER (2011), Like new

PUNCHES, TURRET16.5 Ton WIEDEMANN, Centrum 1000Q, w/Tooling, Fanuc OP22 Ton STRIPPIT, 1250/H20 (1998), 197" x 50" Max. sheet size22 Ton TRUMPF, TC2020R (2003), W/ Load & Unload System, Excellent !25 Ton TRUMPF, TC500R/1600 (2001), 60” throat, set of Catridges, Asstd’

tooling, Quicksharp tool grinder25 Ton TRUMPF, TC500/1300, 50"x 100"33 Ton AMADA, 357 Queen (1998)33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P33 Ton AMADA, EMK 3610NT (2007)50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54 Stn, tooling

ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" (Demo) TAURING, SAF DS 50HV, Hydraulic2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital Readout

ROLLS, PLATE BENDING1.575"x 10" MG, Hyd, 4-Roll1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch3/4"x 10' BERTSCH (2005), Hydraulic

SAWS, BAND, HORIZONTAL9"x 16" DOALL, Semi-Auto10"x 15" "NEW" ACRA, Speeder FHBS-250V10"x 16" JAESPA, Semi-Auto12"x 14" RAM, Semi-Auto

SAWS, BAND, VERTICAL20" throat CLAUSING STARTRITE, No.20V

SHEARS, POWER SQUARING1/4"x 10’ "NEW" ACCURSHEAR, No.6250103/8"x 8’ ACCURSHEAR (1998), Hydraulic

MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendantGundrill ELDORADO, M75-1041, 3/4" x 30"Threader RIGID, Model 535, some toolingSanding/Deburring Machine, 37" MIDWEST, (2014), w/ Dust CollectorSpot Welder 15 KVA, WELDOMATIC, 24" throat, 575VWire Machinery "NEW" METALEX, WT250, Wire Nibbler

NEW


WE BUY SINGLE MACHINES OR COMPLETE PLANTS

63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com

HAAS, VF-1D, 2005, 20”X, 16”Y, 20”Z,Vert. Mach. Center, 15,000 rpm

HAAS, SL-20T, 2005,CNC Turning Center,

NEW Accupress CNC Hydraulic Press Brakesavailable from stock

TRUMPF, 5000 Watt, 5’ x 10’, 2005,Siemens 840D Control

22 Ton, TRUMPF, TC2020R, 2003, With Load & Unload System, Full set of Cartridges, Excellent !

HAAS, No, SL-20, 2005, With Live Tooling, C-Axis, Excellent !

100 Ton x 6’, ACCURPRESS, No. 71006, ETS3000, 3-Axis Control, X, Y, R

12” x 51” TOS, No. FV25 CNC A,Fagor 800M, 3-Axis CNC Control


MASTEEL AMERICA CORP.

Vancouver Head Office: Unit 120, 7490 MacDonald Road, Delta, B.C. V4G 1N2 Tel: 800-813-4434 Edmonton Office: 854 78 Ave NW, Edmonton, AB, T6P 1L7 Tel: 780-466-4693 Toronto Office: 1775 Meyerside Drive, Unit 3, Mississauga, Ontario, L5T 1A3 Tel: 905-670-4434

MASTEEL AMERICA CORP.

www.masteels.com

MAXCUT CNC HORIZONTAL BORING MILLS

CNC HORIZONTAL BORING MILLS

Fixed column or T-type design 110 mm, 130 mm and 150 mm diameter spindles Spindle speeds to 3000 rpm Rotary Table or Planer table or Combination table Table lengths to 6000 mm X-axis travels to 6200 mm Y-axis travels to 3000 mm Table capacity to 50 t Cast iron construction Box ways (on X & Y-axis) Linear scales on X, Y and Z-axis standard 40 position tool magazine standard Chip conveyor and bin standard Table splash guard standard Universal index head option CNC Facing head option FANUC, FAGOR of HEIDENHAIN CNC

PRICES START AT:

U.S. $ 375,000 Some models available from

stock



Page 8 / Steel Marketplace / JULY 2007

�

• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •

• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •

VISIT US AT:www.jordancraigmachinery.com

TO VIEW A COMPLETE LIST

Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com

JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected]: 845-398-0074 www.jordancraigmachinery.com

4000 WATT AMADA FOMII 3015NT LASER MFG:2012, STOCK #10395

257 TON, TRUMPF TRUMABEND V230, BRAKE PRESS, DELEM DA69 6-AXIS, CLAMPING, CROWNING, MFG:2004, STOCK #10404

33 TON, AMADA, EMK3610NT AMNC-F,TURRET PUNCH, 60” X 100”,MFG:2007, STOCK #10361

AMADA,GEMINI FO-3015NT, 4,000 WATT, LASER, 5’X10’, APPROX HRS: 45,000

MFG:2005, STOCK #10402

22 TON, STRIPPIT, V20 1525 FANUC 180I,TURRET PUNCH, 60” X 80”, 34 STATION,

4 A/I, MFG:2011, STOCK #10413

88 TON, AMADA, RG-8024LD, BRAKE PRESS, 2-AXIS CNC, MFG:1999 STOCK #10425

AMADA 6KW LC-3015F1NT, LASER,5’ X 10’ DUAL PALLET

MFG: 2011, STOCK #10114

33 TON, AMADA, VIPROS 358 KINGII, TURRET PUNCH, FANUC 18P, 4 A/I.MP1225NJ LOAD/

UNLOAD, MFG:1999, STOCK #10383

33 TON, AMADA, PEGA 357, TURRET PUNCH, FANUC 04PC, 58STA., 2 A/I,MFG:1994, STOCK #10429

AMADA FO MII RI 3015, 4000 WATT, LASER,5’ X 10’ ROTARY INDEX,

MFG:2012, STOCK #10320

143 TON, AMADA, HDS-1303NT, BRAKE PRESS, AMNC-PC 8-AXIS,

MFG:2006 STOCK #10426

22 TON, AMADA EM2510NT, TURRET PUNCH, AMNC NT CNC, 45 STATION 4 A/I,

MFG:2004 STOCK #10451

Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS


MACHINERY ADVERTISER

PUBLISHER

David Stapleford

PRINTED BY:

Ricter Web Printing

DELIVERY

Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month

DEADLINE

The deadline for advertising is the dayfollowing the last Wednesday of the month

ADDRESS

343 Smith AveBurlington, ON, L7R 2T9

Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.com

e-mail: [email protected]

MUST SELL

Cincinnati 10ga x 10'

Power Squaring Shear

Bliss #21

Punch Press

Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228

Website: www.managingyourassets.com

Alberta

B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15

British Columbia

ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17

Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15

Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21

Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22

Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27

Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10

Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18

Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3

Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26

Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13

Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14

Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15

Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2

L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12

Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25

Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15

Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1

Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15

Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15

Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15

Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5

S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23

Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4

Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15

TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28

Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6

Quebec

Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15

Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17

Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23

Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15

Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25

Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15

USA

Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8

S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25

Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY

New & Used Fabricating Machinery for Over 39 Years

2 TON ALVA ALLEN, OBI, #B2, 1/3 HP, 110 V - $2,150.00 (2)2 TON ALCECO, OBI, #2IP, 1/3 HP, 110 V - $2,150.002 TON BENCHMASTER, OBI, #2, 1/2 HP, 110 V - $1,850.003-1/2 TON ALCECO, OBI, DEEP THROAT, 110 V - $2,500.004 TON ALCECO, OBI, # 4IP, 1/3 HP, 550 V - $2,250.00 (6)4 TON ALCECO, OBI, #4IP, 1/3 HP, 110 V - $2,250.00 (2)4 TON ALCECO, OBI, #4SP, 9” SH, 1/3 HP, 110 V - $2,950.00 (2)4 TON BENCHMASTER, OBI, #451, 1/3 HP, 110 V - $2,250.004-1/2 TON FAMCO, OBI, #50A, 1/4 HP, 550 V - $2,150.00 (2)5 TON ALVA ALLEN, OBI, #BT5, 1/3 HP, 110 V - $2,250.00 (4)5 TON BENCHMASTER, OBI, # 152, 1/3 HP, 110 V - $2,250.005 TON ROUSSELLE, OBI, #OE, 1/3 HP, 110 V - $2,450.006 TON ALCECO, OBI, #6IP, 1/2 HP, 550 V - $2,950.006 TON AZIMUTH, OBI, #6IP, 1/2 HP, 550 V - $2,950.006 TON AZIMUTH, OBI, # 6IP, 1/2 HP, 110 V - $2,950.0010 TON AZIMUTH, OBI, #10IP, 1 HP, 550 V - $3,500.0010 TON ROUSSELLE, OBI, #1A, 3/4 HP, 110 V - $2,950.0015 TON ROUSSELLE, OBI, #2, 1 HP, 550 V - $2,950.0015 TON ROUSSELLE, DEEP THROAT, # 2G, 1 HP, 550 - $3,500.0020 TON BLOW, OBI, #2, 1 HP, 550 V - $2,850.0022 TON ALCECO, OBI, #22IP, 2 HP, 550 V - $3,950.0025 TON ROUSSELLE, OBI, #3, 2 HP, 550 V - $4,250.00 50 TON BROWN BOGGS, OBI, #16, 5 HP, 550 V - $5,500.0050 TON BROWN BOGGS, OBI, A/C, PALMS/FOOT, 5 HP - $15,500.0070 TON STANKO, OBI, A/C, PALMS/FOOT, 5 HP, 550 - $15,500.00

LARGEST INVENTORY OF SMALL USED PUNCH PRESSES IN CANADA!

STEVENS MACHINERY SALES (2005) INC.2 Royalcrest Road, Etobicoke (Toronto) ON, M9V 2L5

Phone: (416) 798-3611 Toll Free: 1-866-798-3611www.stevensmachine.com • Email: [email protected]

• Reach more people faster• Email over 5000 companies using CLUE’s highly targeted industry list• Save on the second blast• Feature your machine in our monthly newsletter


Call today: 905-528-7765 oremail us at: [email protected]

Over 5000 Names

CLUE MACHINERY ADVERTISER ONLINE

Great forAuctions

Single MachinesMultiple MachinesPlant Real Estate

M A C H I N E R Y

EMAILBLAST


7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959

Email: [email protected]: www.walkermachinery.com

FEELER FTC-10CNC lathe

BORING MILLS, CNC, HORZ, FLOORUNION BFP 130 CNC, 5.12", (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLETOS WHN 13, CNC, 80” x 137“ travel, 1996, Heidenhain 426 control4” TOS W100A, 44”x63”x63” trvls, 50 tpr, 4-axis DRO, new paint!, 19814” TOS W100A, 44”x63”x63” trvls, 50tpr, 4-axis DRO, new paint!, 19864“ TOS W100A, (2014) Remanufactured, 50 tpr spindle factory rebuilt to new tolerance, 5-axis Heidenhain DRO4” UNION CNC point to point, 44”x40”x63” trvls, TNC 135 Heidenhain control, very nice condition!4“ TOS W100A, 44"x 63"x 63" trvls, 4-axis DRO 49"x 49" rotary table, new 19964.3” TIGERCUT 110 CNC, 63"x 86" travels, Fagor CNC 1 degree index table, new 2005BORING MILLS, VERT72” G&L, CNC, 12 ATC, live tools, Refurbished 2009 Fanuc 21i ctlDRILLS, RADIALMAS VR 8A x 2500, 3" capLATHES, ENGINEChein Yeh, 20”x60”, 4-way toolpost, steady & follow rest, 3.25” bore, new paint!VDF 25”x120”, quick change toolpost, steadies, follow rest, 3 & 4 jaw chk, excellent!TOS SN 63C, 25”x157”, 4-way toolpost, steadies, new 1998TACCHI, 50"x 315", (1973) Steadies, follow rest, 4-jaw chuckPOREBA TCG 160, 63"x 393", As New!NILES, 70"x 315", 3-bedway design, pendant control on carriage heavy dutyLATHES, N/C & CNCMORI SEIKI SL-6 CNC, 50hp motor, Fanuc 6T control, 15"chk new 1981Feeler FTC 10 CNC, yr 1998, Fanuc control, 6” chk, chip conveyor, 8 sta. turret

MACHINING CTRS, HORZNIIGATA HN 80 FC, 32"x 32" pallets, Fanuc 11m control, 6 pallet pool built in facing head and in/out spindle movement for boring mill applications, 120 ATC, new 1992MILLS, UNIVERSALTOS FGS 63T plus, 25"x 71", (2002) 3-Axis DRO, Variable speeds/feeds pendant ctl, 50 tpr, unv headZAYER 66MB, 28"x 80", 3-Axis DRO, Unv head, pendant ctl variable speeds/feedsMISCELLANEOUS50 plastic automotive skids, 45"x48" pallet - 4 way pick upCast Iron Floor Plates, 157" x 74" x 16" 2 AvailablePortable Drilling Unit, CLIMAX KM 3000Rotary Table, TOS ISO 16, 86"x 86", 60" Travel, 17 Ton, Rotary & Linear DRO

20Years

MODERN TOOL BC LTD.

New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440

Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.

1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440

DURMA AD-R37175 CNC Hydraulic Press Brake

HYD-MECH S-20A IIIAutomatic Band-Saw

Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm

On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC

Service & Parts Sales | Toll-Free: 1-800-717-1440

SCOTCHMAN 6509-24MHydraulic Ironworker

DURMA PBH-180Profile Bending Machine


• Reach more people faster

• Email over 5000 companies using CLUE’s highly targeted industry list


Call today: 905-528-7765 or email us at: [email protected]

Over 5000 Names

CLUE MACHINERY ADVERTISER ONLINE

M A C H I N E R Y

LET US MANAGE YOUR MACHINES ONLINE


SYLVAIN TREMBLAY MACHINERY

NICHOLAS COREA, Table 43”x117”, ISO 50, Speed

20-2000, Heid. 3-Axis

TARNOW Lathe, TUJ50MX2000,1995, Fully Equipped, DRO

LEPONT Lathe (Italy), 40” x 16’,4.5” Spindle Bore, DRO

KONE 15TM (2 x 7.5TM) x 36', 25’ Lift, Mint Condition

2 x 7.5 TM hoist KONE

MUST BE SOLD

CNC Lathe, HURCO TM8, 2010, 23.5”x18.8”, Bar 2”, Chuck 8”,

Control WINMAX, 15hp

Roto-Die 10', model 10,mint condition

Universal milling GAMBIN, 3M,15” x 60”, 40 Taper

Contact: Sylvain Tremblay • Cell: (819) 314-4967 • [email protected]

KINGSLAND, 175 Tons, Secured, Tooling

TOS, SN71, 28''x157'', taper,full equip, DRO Acurite

PAGE 30 CLUE, December 2013

AIR COMPRESSORS

JUN AIR 15 litre 120psi

QUINCY 5hp

HUSKY (Pro) 5hp 80 gallon tank

DEVILBISS 5hp

WEBSTER 30hp 200 gallon tank

DRILLS

CANADIAN BUFFALO 1/2"

BUFFALO

ALLEN drill press, 3ph

ARBOGA Gearhead Drill

DoALL Gearhead drill, swivel

ARBOGA (G1304) Bench top drill

HERBERT 15" 3ph

CINCINNATI BICKFORD 24"

FORK LIFT TRUCKS

BLUE GIANT 1500lb die lift

TCM 5000lb propane, 4 stge mast, side shift

TCM 10,000lb Propane, 3stge mast

Assorted Pallet Trucks

HYSTER 15,000lb propane, 3stge mast, side

shift

GRINDERS

FORD SMITH pedestal grinder

THOR Pedestal grinder

JONES & SHIPMAN Surface Grinder 540,

550v, 3ph

J&S 6"x 18" automatic surface grinder

LATHES

TOS (SV18RA) 15"x 60"

COLCHESTER 16"x 60"

VOEST 17"x 60"

(LC360B) 360"x 1000"

MILLS

HONEYWELL Light curtains

BRIDGEPORT (J series) 9"x 32"

CINCINNATI 11"x 54" Vertical

TOS (FNK25A) 11"x 65"

TOS (FA3AV) 12"x 54" 40 taper

PRESSES

ARBOR (#2)

GREENERD (#3a) Arbor Press

ALGOMA 50T H Press, 575v, 3ph

BUFFALO 100T H press

SAWS, BAND, HORIZONTAL

WELLS (V-12)

STARTRITE (H225) 10"x 16"

TURN-PRO 10"x 17"

RAM 12"x 16"

SAWS, BAND, VERTICAL

RIGID (MS1065LZA) 10" compound mitre saw

CLIPPER (BBC156) 14" Concrete saw

ROCKWELL 14"

MAKITA 14" Chop saw, single phase

MEP (Rabbit 351) 14" Cold cut saw

WELDERS

MILLER (650) Mig welder w/ double feeder

AERCOLOGY’S WELDAIR (WA1000CP)

Smoke eater

THERMAL ARC (PAK 5Xr) Plasma cutter

MILLER (Coolmate 4) Water cooler

ARCWELD (G022263) 230/460/575

Smoke Eater, NEDERMAN

LINCOLN (CV-300)

THERMALARC (250 Tigwave)

CANOX Arc Welder

L-TEC Heliarc 250hf plus squarewave

MILLER (Big 50) Diesel welder, 400 amp

MEMCO (Stick AC-225) single phase

MISCELLANEOUS

Assorted Transformers

Hydraulic Pump

Industrial Fan, VARY 4’ x 4’

MITUTOYO height gauges, assorted sizes

Assorted Rotary Tables

Mag. Lathe Chuck, ECLIPSE

Belt sander, KALAMAZOO 6" Pedestal

Assorted Demagnetisers

Bead Rolling Machine, CMZ7, 114v, single

phase

Pressure Washer, PSC 600v, 3ph

Assorted Measuring Tools

Belt Sander, BROOK HANSEN 6"x 80"

Pipe Vise Stands, (2) PILOT (No.20)

Angle Plates

Torque Wrench, PROTO 600 ft/lbs

Collet sets

Assorted vises

Assorted Chain Hoists

Tri Vise, RIGID

Magnets, 800-1000kg

Air Hoist 2T

Hardness Testers

JET & CM 10T chain falls, 20’ lift

Bore Gauge, SUNNEN (Dial)

Tri Vise, RIGID

RIGID Tooling for threading machine

Phone: 905-634-8442 Fax: 905-681-69404280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5

www.paulmachinery.com


A2450 AIR COMPRESSORS

25hp DEVILBISS, , Piston Type, 575V, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

B1804 BENDERS, HYDRAULIC

5-1/2" ENERPAC, , Hyd. Pipe bender, w/assisted tooling,

(Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

B5500 BORING MILLS, HORZ, TABLE

TOS, W-100A (1987), Excellent Condition, $64,500,

(Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266)

TOS, WHN 13, S/N 04-18, Installed new 1996, Spindle 5.12",

ISO #50, Cross trvl:138", Vert:78", 50 hp, Fanuc 16M, CNC

rot. tbl 63" X 70", (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

B6985 BRAKES, HAND

16ga X 10’ BROWN & BOGGS, , $3,000, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 1

B7000 BRAKES, PRESS

15 Ton x 4’ CHICAGO, , Mechanical, $1,900, (Machine

Solutions Inc. Tel: 416-220-5910 See Page 1

20 Ton x 4’ ALLSTEEL, , Hydraulic, $5,500, (Machine


20 Ton x 4’ WYSONG, , Mech. Automec CNC single axis

backgauge, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

35 Ton x 6’ ALLSTEEL, No. 35-6, Manual BG, (Trader

Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

35 Ton x 6’ TRI-ACRO, 35-6 (1993), Hydra-Mechanical,

Hurco 5C, Ref# 10204, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R,

Crowning, Laser safety, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

45 Ton x 8’ ALLSTEEL, , Automec CNC 99, Single axis

backgauge, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

55 Ton AMADA, FBDIII5020NT (2000), “Up-Acting” 7-Axis NT

Control, Ref# 10355, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

55 Ton AMADA, RG50 (1999), Hurco Autobend 7, 2-Axis,

Ref# 10354, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

55 Ton AMADA, FBD5020 (1989), NC9EXII 3-Axis CNC,

78.74" O.A., Ref# 10391, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

55 Ton TRUMPF, V50 (2001), Prog. Z1,Z2, Clamping, Ref#

10417, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader


See Page 4

60 Ton x 6’ CINCINNATI, 60CBII4 (1997), 2-axis CNC Back

Gauge (Upgrade), Ref# 10370, (Jordan Craig Machinery

Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)

See Page 7

60 Ton x 8’ ACCURPRESS, No.7608, Autogauge G24

Backgauge, ETS100 Ram, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

65 Ton x 6’ ALLSTEEL, No. 6508 (2001), Automec single

axis, BG, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

72 Ton TRUMPF, Trubend 3066 (2008), 4-Axis, 2700 Hours,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader


See Page 4

88 Ton AMADA, FBDIII8025NT (2001), AMNC-PC, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,

(Jordan Craig Machinery Int’l Inc. Tel: 845-398-0073,

Fax: 845-398-0074) See Page 7

88 Ton AMADA, Astro 100M (2001), FBDIII-8025, Sold NEW

in 2004, Ref# 10192, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

88 Ton AMADA, RG-8024LD (1999), 2-Axis CNC, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

88 Ton x 98.6" AMADA, FBD 8025F (1992), “Up-Acting”,

NC9F Control, Ref# 10356, (Jordan Craig Machinery Int’l

Inc. Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

90 Ton CINCINNATI, 90AFX10 (2000), AutoForm 6-Axis,

Crowning, 12’ O.A., Ref# 10392, (Jordan Craig Machinery

Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)

See Page 7

93.5 Ton TRUMPF, Trubend 5085 (2011), 6-Axis BG, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

95 Ton TRUMPF, V85 (1997), Delem Prog. Z1 & Z2, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

100 Ton TOYOKOKI, HYB 1003 (1998), 10’ O.A.,5-Axis,

European Style Tooling, Ref# 10405, (Jordan Craig

Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)

See Page 7

100 Ton x 6’ ACCURPRESS, 71006, ETS3000, 3-Axis, X,Y,R,


Fax: 905-669-7512) See Page 4

110 Ton AMADA, Astro 100NT (2004), HDS1030, Robotic

bending cell, Ref# 10203, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

110 Ton x 8’-6’ “NEW” FERRIC, , Ferric PB Pro Falcon

2600x100, XR Back gauge, CNC crown, 2D graphic, (Ferric


See Page 2

110 Ton x 10’ AMADA, RG100 (1998), NC-9EXII Ctrl, Safety

lights, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

110 Ton x 13.5’ GASPARINI, EFB 4100x105, XR Backgauge,

CNC Crown, DNC angel prog., (used), (Ferric Machinery


120 Ton ACCURPRESS, Edge 412012 (2015), 6-Axis Vision

CNC, Ref# 10415, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

120 Ton x 12’ ALLSTEEL, , Hurco CNC, $18,000, (Machine




See Page 4

137 Ton AMADA, HFB1254/5, NEW 1995, Operateur CNC,

165", Ref# 10214, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

138 Ton AMADA, FBD1253NT (1999), Up-Acting CNC, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

138 Ton AMADA, FBD1253NT (2003), Up-Acting CNC, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

143 Ton AMADA, HDS-1303NT (2006), AMNC-PC 8-Axis,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

PAGE 16 CLUE, April, 2016

CLASSIFIED -LISTING YOUR MACHINERY AND EQUIPMENT TODAY

LEADS TO SUCCESSFUL SALES TOMORROW

Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222

USED PRESS BRAKE WARCOM, CNC 6 AXIS+CROWNING, COMPLETELY SECURE

Must

be Sold

125TM x 4 meters (13’-6’’)

Contact Sylvain Tremblay Ph: 819-477-6677Em: [email protected]


CLUE, April 2014 PAGE 17

B7000 BRAKES, PRESS G4706 GRINDERS, CYLINDRICAL

143 Ton AMADA, HDS-1303NT (2005), AMNC-PC 8-Axis,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

144 Ton TRUMPF, V130 (1997), Delem Prog. Z1 & Z2, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

146 Ton AMADA, HFE 1303 M2 (2010), Ref# 10435, (Jordan

Craig Machinery Int’l Inc. Tel: 845-398-0073,

Fax: 845-398-0074) See Page 7

150 Ton x 10’ “NEW” FERRIC, Speed Bend Pro, 3100x135,

XRZ1Z2 back gaug, CNC crown, 2-3D prog. off line

software, (Ferric Machinery Inc. Tel: 877-337-7424,

Fax: 905-820-3234) See Page 2

165 Ton x 12’ HACO, ERM 36150, 6 axes CNC BG, CNC,

Crown, AKAS Laser BC59, 2D Graphic (used), (Ferric


See Page 2

165 Ton x 12’ HACO, ERM 36150, CNC backgauge, ATS560

ctrl & tooling (used), (Ferric Machinery Inc.

Tel: 877-337-7424, Fax: 905-820-3234) See Page 2

170 Ton x 12’ VERSON, , Mechanical, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 1

175 Ton x 12’ ACCURPRESS, Advantage 717512 (2004),

ETS3000 3-Axis, Ref# 10273, (Jordan Craig Machinery Int’l


175 Ton x 12’ “NEW” TOSKAR, , CNC 4-axis Touch graphic

Manual crown tooling, quick release clamping, (Machine


193 Ton x 10’ “NEW” FERRIC, , PB Pro Falcon 3100x175, XR

Back gauge, CNC crown, 2D graphic, (Ferric Machinery







See Page 4

220 Ton x 13’ FISHER, , XR BG, CNC Crown Cybelec

DNC900 control, (used), (Ferric Machinery Inc.

Tel: 877-337-7424, Fax: 905-820-3234) See Page 2




242 Ton x 12’ “NEW” FERRIC, SB Pro 3760x220, XRZ1Z2

backgauge, CNC crown, ER90 Plus 2D-3D offline incl.,

(Ferric Machinery Inc. Tel: 877-337-7424,

Fax: 905-820-3234) See Page 2



See Page 4

257 Ton TRUMPF, Trumabend V230 (2004), Delem DA69

6-Axis, Clamping, Crowning, Ref# 10404, (Jordan Craig


See Page 7


Back Gauge, CNC Crown, 2D graphic, (Ferric Machinery


40-400 Ton x 5-16’ “NEW” TOSKAR, , Hydraulic, (Machine


400 Ton x 17’ CINCINNATI, , Mechanical, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 1

600 Ton x 16’ ALLSTEEL, , Hydraulic, $27,000, (Machine


750 Ton x 16’ CHICAGO, , Hyd. CNC Automec 2-Axis, Safety

lights, Guarding, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

1750 Ton PACIFIC, Fabri-K 1750-40/36 (2007), Cybelec

8805, Ref# 10242, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

D0654 DEBURRING MACHINES

37" MIDWEST, (2014), w/ Dust Collector, Sanding/Deburring

Machine, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

D5700 DRILLS, RADIAL

3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery


5" BERGONZI, TM50/1600, (Powermaster Machinery Ltd.

Tel: 905-624-9327, Fax: 905-624-8591) See Page 18

F5006 FURNACES

Heat Treating , New & Reconditioned, Powered by Electric,

Gas, Oil, Propane, for all purposes, (Park Thermal

International Tel: 905-877-5254, Fax: 905-877-6205)

G4706 GRINDERS, CYLINDRICAL

12"x 40" KIKINDA, , w/I.D. Grinding, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4


G8025 GRINDERS, SURFACE, RECIP. L0850 LASERS


G8025 GRINDERS, SURFACE, RECIP.

8"x 18" FREJOTH, , Automatic, Hyd., (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

8"x 20" JONES & SHIPMAN, , $1,900, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 1

10"x 20" CHEVALIER, , (Powermaster Machinery Ltd.

Tel: 905-624-9327, Fax: 905-624-8591) See Page 18

H6004 HONES

SUNNEN, , MBC-1804M & MBC-1802MR, Power Stroke,

Horiz., (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

SUNNEN, MBB-1660K, Manual, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet,


Fax: 905-669-7512) See Page 4

I4775 PRESSES, INSERTION

4 Ton HAEGER, , w/Stand, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

8 Ton PEMSERTER, Series 2000 (2002), PLC control,


Fax: 905-669-7512) See Page 4

I6200 IRONWORKERS

50 Ton “NEW” FERRIC, HIW 45, Single Operator, 5 Stations,


Fax: 905-820-3234) See Page 2

60 Ton “NEW” FERRIC, HIW 60 DC, Dual operator, 5

stations, (Ferric Machinery Inc. Tel: 877-337-7424,

Fax: 905-820-3234) See Page 2

65 Ton “NEW” FERRIC, HIW 60, Single operator, 5 stations,


Fax: 905-820-3234) See Page 2

75 Ton KINGSLAND, 75XS, Dual operator, 5 stations (used),


Fax: 905-820-3234) See Page 2



Fax: 905-820-3234) See Page 2



Fax: 905-820-3234) See Page 2



Fax: 905-820-3234) See Page 2

55 Ton to 120 Ton “NEW” DURMA, , (Machine Solutions Inc.

Tel: 416-220-5910 See Page 1

100 Ton OMERA, , Mechanical, $3,900, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 1

L0850 LASERS

2000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff

control, Lantek Expert, (Ferric Machinery Inc.

Tel: 877-337-7424, Fax: 905-820-3234) See Page 2

2000 Watt AMADA, LC1212A3XL (2004), 4’ x 8’, 17,000

hours, New turbo blower, Ref# 10175, (Jordan Craig


See Page 7

2000 Watt SALVAGNINI, L3 Fiber (2011), 5’x 10’, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

2000 Watt AMADA, Pulsar LC1212A2 (1998), 28,300 Hrs,

New Turbo Blower @ 23,400, Ref# 10406, (Jordan Craig


See Page 7

2000 Watt AMADA, Pulsar LC2415XLA3 (2000), Current

Machine Hours 34,000, Ref# 10414, (Jordan Craig


See Page 7

2000 Watt AMADA, Pulsar LC1212A2 (1996), 39,500 hours,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

2600 Watt TRUMPF, Trumatic L2503E, 5’ x 10’ table, good

working order, (Ferric Machinery Inc. Tel: 877-337-7424,

Fax: 905-820-3234) See Page 2



Tel: 877-337-7424, Fax: 905-820-3234) See Page 2

3000 Watt “NEW” FERRIC, Fibermak, 78 X 160, Beckhoff


Tel: 877-337-7424, Fax: 905-820-3234) See Page 2

3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483

Beam on hours, Ref# 9753, (Jordan Craig Machinery Int’l


3000 Watt BYSTRONIC, BySprint Fiber 3015, Installed New:


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,


Fax: 845-398-0074) See Page 7

3.2KW TRUMPF, L2030 (2009), 5’x 10’, Auto

Loader/Unloader, Ref# 10432, (Jordan Craig Machinery

Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)

See Page 7

3500 Watt TANAKA, TF-3500B (1996), 8’ x 95’, Fanuc 16L,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

British Columbia

Masteel, Delta (Mary) ...................................................................604-952-4434 ........604-952-4432..........6

Modern Tool (BC) Ltd., Port Coquitlam (Pam) .............................604-472-1444 ........604-472-1455..........9

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ...........................519-485-7089 ........519-485-7368........12

CanAmera Machine Tools Inc., Cambridge (Marian) ...................905-878-0888.......................................13

DiPaolo Machine Tools Ltd., Mississauga (Nelson) .....................905-676-9265 ........905-676-9436........19

Elliott Machinery Ltd., Oakville (Frank).........................................905-829-2211 ........905-829-5600..........3

Ferric Machinery Inc., Mississauga (Koen) ..................................877-337-7424 ........905-820-3234..........2

Havlik Int’l Machinery, Cambridge (John).....................................519-624-6240 ........519-624-4119........20

Machine Solutions Inc., Guelph (Andrew)....................................416-220-5910.........................................1

Park Thermal International, Georgetown (Sales).........................905-877-5254 ........905-877-6205........18

Paul Machinery, Burlington (Paul) ................................................905-634-8442 ........905-681-6940........11

Powermaster Machinery Ltd., Mississauga (Peter)......................905-624-9327 ........905-624-8591........18

S K Braly Machinery Inc., Mississauga (Steve)............................905-793-8080 ........905-793-2190........15

Stevens Machinery Sales (2005) Inc, Toronto (Andrew) ..............416-798-3611 ........416-798-8439..........8

Trader Machinery Inc., Concord (Jonathan).................................905-669-7507 ........905-669-7512..........4

Walker Machinery Ltd., Milton (Chris) ..........................................905-876-0890 ........905-876-1959..........9

Quebec

Machinerie Gilles Lupien, Drummondville (Gilles)........................819-478-5266 ........819-478-5266........12

Machinery S. Tremblay, Drummondville (Sylvain)........................819-477-6677 ........819-477-6466........11

USA

Jordan Craig Machinery Int’l Inc., New City (Jordan) ...................845-398-0073 ........845-398-0074..........7

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY


L0850 LASERS L6135 LATHES, N/C & CNC



Tel: 877-337-7424, Fax: 905-820-3234) See Page 2

4000 Watt AMADA, FO MII RI 3015 (2012), 5’x 10’ Rotary

Index, Ref# 10320, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt TRUMPF, Trulaser (2006), 5’x 10’, 22,000 Beam

on hours, Ref# 10325, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt TRUMPF, Trulaser 3040 (2011), 80"x 160", Dual

Pallet, Ref# 10260, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt AMADA, Gemini FO4020 (2003), 80"x 160", Dual

Pallet, Ref# 10262, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt AMADA, FOMII 3015NT (2012), Ref# 10395,


Fax: 845-398-0074) See Page 7

4000 Watt AMADA, Gemini FO-3015NT (2005), 5’x 10’,

Aprrox. Hrs: 45,000, Ref# 10402, (Jordan Craig Machinery

Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)

See Page 7

4000 Watt MAZAK, Hypergear 510 (2006), Installed

New:2008, Less than 8500hrs, Ref# 9707, (Jordan Craig


See Page 7

4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt TRUMPF, TCL3030 (2002), Siemans CNC, 60"x

120", Ref# 10412, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4KW TRUMPF, Trulaser 3030 (2009), 5’x 10’, 22 Shelf

Tower/Liftmaster, Ref# 10431, (Jordan Craig Machinery Int’l


4000 Watt AMADA, LC3015F1NT (2012), 5’x 10’, Approx. 12,

000hrs, Ref# 10434, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt AMADA, Gemini FO-3015NT (2004), 5’ x 10’,

Installed 2005, Ref# 10453, (Jordan Craig Machinery Int’l


4000 Watt BYSTRONIC, Bystar 3015 (1999), 5’ x 10’, Shuttle

table, Rotary axis, Loader, Ref# 10455, (Jordan Craig


See Page 7

4000 Watt BYSTRONIC, Bystar 4020 (1999), 80"x 120",

Shuttle table, Rotary axis, Loader, Ref# 10456, (Jordan


Fax: 845-398-0074) See Page 7

5000 Watt TRUMPF, L3050 (2005), 5’ x 10’, (Trader


See Page 4

5 KW TRUMPF, Trulaser 3030 (2010), 5’x 10’, Liftmaster,

Approx. 5000 Beam on hrs, Ref# 10352, (Jordan Craig


See Page 7

5000 Watt HK, FL-3015 (2011), 5’x 10’, Ref# 10259, (Jordan


Fax: 845-398-0074) See Page 7

5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

6000 Watt TRUMPF, Trulaser 5030 (2008), Liftmaster, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

6KW AMADA, LC-3015F1NT (2011), 5’x 10’, Dual Pallet, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

6KW BYSTRONIC, Bystar 4020 (2011), Rotary Axis &

Automation, Ref# 10422, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720,


Fax: 845-398-0074) See Page 7

L2150 LATHES, CNC

OKUMA ROBUSTURN, LFS15-2SP (1999), Twin Spindle,

4-axis, Dual chk, Dual Turret turning center, (Machinerie

Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)

L3000 LATHES, ENGINE

12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed,

3 & 4 jaw chucks, collets., (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

13"x 40" HARRISON, , Collet chuck, 2-Axis DRO, (Trader


See Page 4

14"x 40" LIBERTY, 1300, 6" 3-Jaw, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

16"x 40" ACRA, , DRO, (Powermaster Machinery Ltd.

Tel: 905-624-9327, Fax: 905-624-8591) See Page 18

18" x 60" “NEW” POWERTURN, 460, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

22"x 80" CHIEN YEH, , (Powermaster Machinery Ltd.

Tel: 905-624-9327, Fax: 905-624-8591) See Page 18

26"x 120" CHIEN YEH, , (Powermaster Machinery Ltd.

Tel: 905-624-9327, Fax: 905-624-8591) See Page 18

63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe,


Fax: 905-669-7512) See Page 4

L6135 LATHES, N/C & CNC

OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw,

2" Bar cap, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

MORI SEIKI, SL150S (1997), (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk,

live holders, C&Y Mill cap, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

HAAS, SL-20 (2005), Live Tool, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

CLUE, April 2014 PAGE 19

CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]

W W W . S K B R A L Y . C O M

CLUE, July 2010 Page 3

BRAKES, PRESS

PACIFIC, 35-6, 35 Ton x 6’ CNCCHICAGO, BPO-412-6, 12ga x 48" Box & PanAMADA, RG-100, 110 Ton x 10’ CNC

DRILLS

SAALFELD, BS50 Pillar drill, 2" capacityBERGONZI, TM1600, 5’ Radial drillDOALL, TG-17 Geared Head drill

FACING & CENTERING

SENECA FALLS, EW-75 CNC w/Milling stationSENECA FALLS, EW-75 CNCSENECA FALLS, CS-LO, 5"x 42"

GRINDERS, CYLINDRICAL

TSCHUDIN, HG-400, 8"x 16"TOS, 2UD-1000, 11.5"x 40" Hyd. Universal grinderSTUDER, S-36, 13"x 40" CNC

GRINDERS, SURFACE, RECIPROC

JONES & SHIPMAN, 540P, 6"x 18" HydraulicBROWN & SHARPE, Micromaster, 6"x 18" HydraulicNICCO, NFG-515HD, 6"x 20" Form grinderBROWNE & SHARPE, 12"x 24"

GRINDERS, TOOL & CUTTER

DECKEL, S1 Multi Axis

LATHES, CNC

DAEWOO, 10 HC CNC Turning CentreMAZAK, Super Quadrad 200 4-AxisCHEVALIER, FCL-1840, 18"x 40" Flatbed cnc lathe

LATHES, ENGINE

HARDINGE, HLV-H, 11"x 18" Precision LatheHARDINGE, HLV-H, 11"x 18" with DROMONARCH, EE, 12-1/2"x 20" Precision Engine LatheNAMSEON, 17"x 55"MORI SEIKI, MR-1500, 20"x 60"CHIEN YEH, 20"x 60"CHIEN YEH, CY560, 22"x 80"TOS, SN63/2000, 24"x 80"PBR, TM-300, 24"x 196"

MACHINING CTRS, HORZENSHU, JE30S

OKUMA, MA40-HA, 16"

MACHINING CTRS, VERTMORI-SEIKI, NV-5000

MILLS, UNIVERSALDECKEL, FP 4, 16"x 28"

MILLS, VERTICAL

FIRST, LC, 9"x 42" 1-1/2EXCELLO, 602, 9"x 42"BRIDGEPORT, 9"x 42"FIRST, LC20VH, 10"x 50" Vert/HorizTOPWELL, 5VK, 10"x 50"

PRESSES, HYDRAULIC & AIRDAKE, PSM-20, 20 Ton manual, H-Frame shop press

PUNCHES, TURRET

STRIPPIT, 18-30

SAWS

STARTRITE, H330MV, 12", HorizontalDOALL, C916, 9"x 16", HorizontalDOALL, 36", VerticalSOCO, MC350 NFA Automatic cut-off saw, non-ferrous

SHEARS, POWER SQUARINGDIACRO, 16ga x 24" Hand shear with standEDWARDS, True-Cut, 10ga x 48"AMADA, M-2560, 1/4"x 8’

WELDERSAIRCO, CV-200 Aircomatic mig welder w/ wire feed15KVA FH Spot welder w/ Holden Hunt TransformerPRECISION, 50KVA Spot welder

MISCELLANEOUS

Belt/disc sander, ROCKWELL DELTA, 429/02End Finishing Machine, SOCO, EF-PV/52Flex Arm Tapper, ROSCAMAT, 300Hot Melt Machine, BENCHMARK, 205-HPHot Melt Machine, BENCHMARK, 525Lapping machine, 16" DOALL, LapmasterThread Rolling Machine, SHENG JIAN, Z28-63Tool setter, WAHLI, MXH 300/200Tilting box table, 30"x 24"x 22"


12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over

Bed 20", Mint cond., (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens

840D, 16" Chk., (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens

840D, 16” Chk., (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0130 MACHINING CTRS, HORZ

OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8",

OSP7000, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0185 MACHINING CTRS, VERT

HAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm, (Trader


See Page 4

OKUMA, No.MX-45 VAE (1998), X-30" Y-18.1" Z-17.7", 40

Taper, OSP 700, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

OKUMA, MX-45 VAE (1999), X-30" Y-19" Z-18", Table 40"x

20", only 5378 hrs. cutting time, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5

CNC, 13,000 rpm, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

HURCO, (2013), 5-Axis, X-42" Y-24" Z-24", (Trader


See Page 4

HAAS, VF-5 (2013), X-50" Y-26" Z-32", 50 Taper, (Trader


See Page 4

M0850 MEASURING MACHINES

SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,


Fax: 845-398-0074) See Page 7

M1550 MILLS, CNC

SUPERMAX, , Knee type Centroid CNC, (Powermaster

Machinery Ltd. Tel: 905-624-9327, Fax: 905-624-8591)

See Page 18

JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd.

Tel: 905-624-9327, Fax: 905-624-8591) See Page 18

M1659 MILLS, UNIVERSAL

10"x 50" TECHLEADER, , 5hp, 2 axis read-out, powerfeed,

$5,500, (Machine Solutions Inc. Tel: 416-220-5910

See Page 1

10"x 50" FIRST, , Horz/Vert, DRO, (Powermaster Machinery

Ltd. Tel: 905-624-9327, Fax: 905-624-8591) See Page 18

M2824 MILLS, VERTICAL

9"x 42/48" BRIDGEPORT, , w/Fagor DRO, (Trader Machinery


9"x 49" EXCELLO, 602, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

10"x 50" FIRST, , 40 Taper, DRO, (Powermaster Machinery


10"x 50" TOPWELL, No.3VK, 2-Axis Anilam DRO, Power

Drawbar, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

10"x 50" HOLKE, , 40 Taper, DRO, (Powermaster Machinery


M2833 MILLS, VERTICAL, CNC

9"x 49" BRIDGEPORT, , Acu-Rite MillPower 3-Axis CNC, R8

Taper, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

10"x 50" SOUTHWESTERN INDUSTRIES, TRAK K3 (2002),


Fax: 905-669-7512) See Page 4

12"x 51" TOS, FV25 CNC A (2004), 3-Axis, Fagor 800M CNC

Ctrl, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

N5230 NOTCHING MACHINES

1/4" x 8.6"sq “NEW” FERRIC, , variable angle, (Ferric


See Page 2

9"x 9"x 1/8" STRIPPIT, , Hyd., (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

O7397 OVENS

New & Reconditioned , Powered by Electric, Gas, Oil,

Propane, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

P2135 PLASMA CUTTING MACHINES

100 Amp MESSER MG, (2000), 6’x 10’, Hy-Definition, CNC

plasma, Metalmaster II, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P6100 PRESSES, OBI

40 Ton BROWN BOGGS, , Air Assist Clutch, (Trader


See Page 4

60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales

Inc Tel: 519-485-7089, Fax: 519-485-7368)

75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton

Machinery Sales Inc Tel: 519-485-7089,

Fax: 519-485-7368)

80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x

36"bed, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable

Stroke Length, Command stamp ctls, (Brighton Machinery

Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch

w/air assist, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

P9050 PUNCHES, LOAD/UNLOAD

AMADA, MP1225NJ (1998), Automatic Load/Unloader, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

P9150 PUNCHES, SINGLE STATION

60 Ton FABMASTER, (2011), Like new, (Trader Machinery


P9275 PUNCHES, TURRET

16.5 Ton WIEDEMANN, Centrum 1000Q, w/Tooling, Fanuc

OP, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#

9812, (Jordan Craig Machinery Int’l Inc. Tel: 845-398-0073,

Fax: 845-398-0074) See Page 7

20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton WIEDEMANN, 2044 (2001), 30 Sta, 2 A/I, 114 Style,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton AMADA, Apelio III 2510VL, Fanuc 160IL, 2KW Laser,

New 2003, Ref# 10372, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,

Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton STRIPPIT, V20 1525 (2011), Fanuc 180I, 60"x 80", 34

Station, 4A/I, Ref# 10413, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton AMADA, AE2510NT (2010), 50"x 100", 51 Station,

Brush table, Ref# 10436, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton AMADA, EM2510NT (2004), AMNC NT CNC, 45

Station, 4 A/I, Ref# 10451, (Jordan Craig Machinery Int’l


22 Ton TRUMPF, TC2020R Bosch (2001), 50"x 100", Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

23 Ton STRIPPIT, Global 20 (2003), Fanuc 180I, 4A/I, Thick

Style, Ref# 10423, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

25 Ton TRUMPF, TC6000L 1600 (2010), Laser/Punch,

Sheetmaster, Ref# 10191, (Jordan Craig Machinery Int’l


25 Ton TRUMPF, TC5000R-1600 (2005), New linear

amplifier, 14,039hrs, Ref# 10159, (Jordan Craig Machinery

Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)

See Page 7

L6135 LATHES, N/C & CNC P9275 PUNCHES, TURRET

PAGE 22 CLUE, April, 2016

OvensFor Powder Coating, Aging,

Stress Relief, Normalizing

Gas or Electric

Heat Treat Equipment

Numerous Sizes Available

Call: 905-702-4644


CLUE, May 2010 PAGE 21

P9275 PUNCHES, TURRET Z9000 MISCELLANEOUS

27.5 Ton TRUMPF, TC500R Bosch CNC (1993), 18 Station

Rotation, Ref# 10349, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

27.5 Ton TRUMPF, TC600L, Siemans 840D, Ref# 10378,


Fax: 845-398-0074) See Page 7

33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P,


Fax: 905-669-7512) See Page 4

33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4 A/I

MP1225NJ Load/Unload, Ref# 10383, (Jordan Craig


See Page 7

33 Ton YAWEI-NISSHINMBO, HPQ-3048 (2012), Siemens

Control, Thick style tooling, Ref# 10326, (Jordan Craig


See Page 7

33 Ton AMADA, EMK3610NT AMNC-F (2007), 60"x 100",


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Vipros 368 King II (1998), Fanuc 18P CNC

control, Ref# 10363, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Vipros 357 Queen (1998), Fanuc O4PC &

PHNC, 58 Sta, 2 A/I, Ref# 10179, (Jordan Craig Machinery

Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)

See Page 7

33 Ton AMADA, Vipros 3610L (2000), L-Shear, 6 Shelf

Loader, Unload Conveyor, Ref# 10269, (Jordan Craig


See Page 7

33 Ton AMADA, EMK 3610NT (2007), (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

33 Ton AMADA, Vipros 358 King (1998), Fanuc O4PC, 4 A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton STRIPPIT, FC1250MH (1992), Fanuc OPB,

Load/Unload, Thick Style 4A/I, Ref# 10420, (Jordan Craig


See Page 7

33 Ton AMADA, Vipros 358 King (1998), Fanuc O4PC, 4A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Pega 357 (2000), Fanuc O4PC, 58 Sta, 2A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Pega 345K (1993), Fanuc O4PC, 58 Sta,

2A/I, Ref# 10421, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Pega 367 (1987), Fanuc O4PC, 60"x 72", 58

Sta, 2A/I, Ref# 10433, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Pega 357 (1994), Fanuc O4PC, 58 Station, 2

A/I, Ref# 10429, (Jordan Craig Machinery Int’l Inc.

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54

Stn, tooling, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

R4704 ROLLS, ANGLE BENDING

2"x 2"x 3/16" “NEW” (Demo) TAURING, SAF DS 50HV,

Hydraulic, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

2"x 2"x 1/4" “NEW” FERRIC, APK50, Mod. Rolls, (Ferric


See Page 2

2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV, (Trader Machinery


2-3/8" x 2-3/8" x 1/4" “NEW” FERRIC, APK61, Mod. Rolls,

DRO, (Ferric Machinery Inc. Tel: 877-337-7424,

Fax: 905-820-3234) See Page 2

3-1/4"x 3-1/4"x 3/8" “NEW” FERRIC, APK81, Mod. Rolls,

DRO, Hyd. Side guides, (Ferric Machinery Inc.

Tel: 877-337-7424, Fax: 905-820-3234) See Page 2

4"x 4"x 3/8" “NEW” FERRIC, APK101, Mod Rolls, DRO, Hyd.

Side guides, (Ferric Machinery Inc. Tel: 877-337-7424,

Fax: 905-820-3234) See Page 2

6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control,

Digital Readout, (Trader Machinery Inc. Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

R5603 ROLLS, PLATE BENDING

1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch, (Trader


See Page 4

3/16"x 4’ “NEW” FERRIC, , ASM plate roll, DRO, mot.

Bending roll, (Ferric Machinery Inc. Tel: 877-337-7424,

Fax: 905-820-3234) See Page 2

3/16"x 5’ “NEW” FERRIC, , ASM plate roll, DRO, mot.


Fax: 905-820-3234) See Page 2

3/16"x 6.5’ “NEW” FERRIC, , ASM plate roll, DRO, mot.


Fax: 905-820-3234) See Page 2

5/16"x 8’ “NEW” FERRIC, , AHS 256 plate roll, 4 roll machine,

hardened rolls cone rolling, DRO, (Ferric Machinery Inc.

Tel: 877-337-7424, Fax: 905-820-3234) See Page 2

1-3/4"x 6.5’ AHK 2035, plate roll, 3 roll machine, hardened

rolls, cone rolling, DRO, (Ferric Machinery Inc.

Tel: 877-337-7424, Fax: 905-820-3234) See Page 2

S0653 SAWS, BAND, HORIZONTAL

9"x 16" DOALL, , Semi-Auto, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

10"x 16" JAESPA, , Semi-Auto, (Trader Machinery Inc.

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

11"x 16" BAXTER, , (Powermaster Machinery Ltd.

Tel: 905-624-9327, Fax: 905-624-8591) See Page 18

S0690 SAWS, BAND, VERTICAL

20" throat CLAUSING STARTRITE, No.20V, (Trader


See Page 4

24" STARTRITE, , (Powermaster Machinery Ltd.

Tel: 905-624-9327, Fax: 905-624-8591) See Page 18

S0805 SAWS, COLD & FRICTION

SOCO, MC350A (2001), (Machine Solutions Inc.

Tel: 416-220-5910 See Page 1

S0948 SAWS, MISCELLANEOUS

4"x 10" ELUMATEC, , Fully Automatic Circular Saw,

(Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266)

S4105 SHEARS, POWER SQUARING

1/4"x 10’ PEARSON, , Hydraulic, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 1

1/4"x 10’ JELSINGRAD, HSL306, Mot. Backgauge (used),


Fax: 905-820-3234) See Page 2

1/4"x 10’ “NEW” FERRIC, HGD 3100 x 6, Mot. CNC back

gauge, Auto gap, (Ferric Machinery Inc. Tel: 877-337-7424,

Fax: 905-820-3234) See Page 2

1/4"x 10’ HACO, (2007), CNC with 39" back gauge, $19,500,

(Machine Solutions Inc. Tel: 416-220-5910 See Page 1

1/4"x 10’ CINCINNATI, 1810G (1996), CNC Front/Rear, Ref#


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

1/4"x 12’ WYSONG, , Mechanical, CNC gauging, (Machine


1/2" x 10’ “NEW” FERRIC, HGD 3100 x 13, Mot. CNC back

gauge, Auto gap, (Ferric Machinery Inc. Tel: 877-337-7424,

Fax: 905-820-3234) See Page 2

1/2"x 12’ ALLSTEEL, , Motorized BG adjustable rake and

gap, (Machine Solutions Inc. Tel: 416-220-5910

See Page 1

1/4"-1" x 8’-20’ “NEW” TOSKAR, , Hydraulic, (Machine


W3054 WELDERS, SPOT

15 KVA WELDOMATIC, , 24" throat, 575V, (Trader Machinery


Z9000 MISCELLANEOUS

Transformers 5 KVA to 1000 KVA, Large Assortment of used,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Pallet Trucks, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Assorted Fans, (Park Thermal International

Tel: 905-877-5254, Fax: 905-877-6205)

Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendant,


Fax: 905-669-7512) See Page 4

Threader RIGID, Model 535, some tooling, (Trader Machinery



BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

“SPECIAL PRICES”HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

42” x 24” x 24” Fagor Control32” x 20” x 20”

28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40


Horizontal Lathes “NEW” 20˝x 60˝ manual lathe, 10˝ 3

jaw chuck, 14˝ 4 jaw chuck, 4˝ spindle bore, splash guard, steady rest, stock 4039

“NEW” 20˝x 80˝ manual lathe, 10˝ 3 jaw chuck, 14˝ 4 jaw chuck, 4˝ spindle bore, splash guard, steady rest, stock 4037

MAZAK Slant Turn 40N-ATC Millcenter 1000, Fanuc Control

RD&D 64˝x 170˝, sliding bed type gap lathe, 16˝ hole through spindle, GN10 CNC control, Stock No. 3849

SAFOP 63˝x 236˝, C axis, live tooling on programmable turret, Siemens 840D CNC control, Stock No. 3791

HITACHI 29˝ swing, Turret Lathe, 6.25˝ hole through, Stock No. 3183

MORI SEIKI 27˝x 35˝, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 4173

AWOH+AMUKO 11˝x 13˝ CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157

SMTCL HTC2050, 8˝x 20˝, CNC turning center, FANUC control, tailstock, low hours, like new, 2010.

DMG CTX-410, 2008, 365mm turning diameter, 505mm swing, 66mm bar diameter, 1700 hours.

Vertical Lathes BERTHIEZ 62˝ table, 75˝ swing, Model

TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 4079

SCHIESS 40˝ table, 55˝ swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071

BULLARD Man-Au-Trol, 42˝ table, equipped with side head, from an aerospace facility, gently used, Stock No. 4205

OKUMA+HOWA ACT 2SP-V3, 10˝ chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219

Cylindrical Grinders SCHAUDT 13˝x 27˝, Universal Heavy

Duty, Stock No. 3826

B&S 10˝x 48˝, Brown & Sharp, Model 1048 Microstatic, Stock No. 3825

Milling Machines HECKERT 16˝x 63˝, Model No. FSS 440

V1/2, Heavy Duty, Universal, Stock No. 3686

Horizontal Boring Mills TOS WD130, 130mm spindle,

Floor type boring mill, FAGOR 8055 CNC, 232˝x 97˝ travel, 90˝x 84˝ G&L table, linear scales, under power, Stock No. 4353

TOS W100A, 1988, FAGOR DRO, tailstock, Stock No. 4805

SCHARMANN 125mm spindle, Model Ecocut, Siemens 880 Ctrl, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50˝x 63˝

Surface & Blanchard Grinders

ARTER Rotary Surface, Horizontal Spindle, Stock No. 3827

SHIBAURA 48˝, Model No. KRT-8D, Blanchard Style, Stock No. 3684

Machining Centres TOS 12˝x 51˝, Model FV 25, FAGOR

CNC control, box ways, pricedto sell, Stock No. 3710

LEADWELL 20˝x 30˝, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453

BRIDGEPORT 20˝x 40˝ CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159

BOSTOMATIC 32G Graphite VMC, 42K spindle, 4th axis.

Miscellaneous IEMCA Bar feeder, 2.55˝ bar capacity,

3600mm bar length, Stock No. 4066

DANDREA CNC facing head

DO-ALL Horizontal Bandsaw, Model C-916A, Stock No. 3466

AMADA Punch Grinder, Stock No. 3463; Granite Table, 150˝x 150˝, Massive!, Stock No. 3418

ARCHDALE Radial Drill, Stock No. 4211

PRATT & WHITNEY Jig Grinder, Model No 20, Pratt and Whitney rotary table, from an aerospace facility, gently used, Stock No. 4215

AMERICAN Radial drill, 5´ arm, 17˝ column, 5MT spindle taper, power quill travel, Stock No. 4237

PFAUTER Gear hobber, Model P900 Turbo, 36˝ max workpiece diameter, 2.5 max DP, 24˝ axial travel, max hob 7-3/8˝ dia x 9˝ long, Auto hob shift, swing away tailstock, change gears, Stock No. 4253

FLOOR PLATES Various sizes

Toronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]

NEW & USED MACHINERY

OTHER SERVICESOn-Site spindle taper grinding

Machine tool calibration and metrology

Mechanical, Electrical and CNC field service

Installations and plant moves

Spare parts including exchange programs

Authorized distributor for Heidenhain,Fagor, Fanuc FA, Siemens and Renishaw.

Certified Appraiser on staff

Way Grinding

Gantries andVertical Boring Mills

Cylindrical, Surface, Rotary, and Vertical

Grinders

CNC Milling Machines and Machining Centers

Universal 5 Axis Milling Machines

Heavy DutyCNC Lathes

Horizontal Boring Mills, Milling Machines,

Machining Centers

Double Column Vertical

Machining Centers

LGB Model R5030, Hydraulic surface grinder, 11.8” x 23.6” magnetic chuck, 1997, Stock 4598.

KASTO Horizontal bandsaw, Model SBA-220 AU, 1985, Stock No. 4567

TRANSFORMERS Various sizes and voltages

LEVELING SHOES Various sizes available

CNC CONTROLS motors, and drives, various

WHQ 13, 2003, 130mm spindle, Heidenhain 430M CNC control, 3500mm - X travel, 2500mm - Y travel, 1250mm - Z travel, 800mm - W travel, 1800mm x 2200mm table size, serial number 2239, Stock No.4851

TOS

BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

“SPECIAL PRICES”HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

42” x 24” x 24” Fagor Control32” x 20” x 20”

28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40


M A C H I N E R Y

899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765

Fax: 905-917-0222


www.havlikgear.com

Introducing the FUT - TOS new generation

Leaders in gear manufacturing since 1886

Exclusive dealer for TOS Kurim

Havlik Gear (Head Office)455 Sheldon Dr., Cambridge, ON N1T 2B7, CanadaTel: (519) 624-6240 Fax: (519) [email protected]

FUT - TOS new generation

The machine is intended for machining of complex shaped work pieces by adopting the conventional technology and high speed cutting. Independent longitudinal and cross beds with a T-shape layout are the base of the machine. A longitudinal slide with a rotary, adjustable table travels along the longitudinal bed in the direction of the “X” axis. Column moves in the cross direction of the “Z” axis.The headstock moves on the guide surfaces of the column in the vertical direction of the “Y” axis.

MAIN MACHINE FEATURES• cutting-edge composite bed and column solution based

onaweldmentfilledwithaspecialconcretemix• considerable higher rigidity than in conventional struc-

tures• spindle with high torque and speed up to 6 000 rpm• high versatility of automatically interchangeable milling

heads• rapid feed rate 30 m/min• HSCmachiningfromfivesides• up to 6 contouring axis• versatile design and application • thermal stabilization of headstock and heads• long service life, accuracy and reliable operation

The FUT machine axis design goes beyond the industry and reached into the segment of horizontal boring machines where it stands out against other current manufacturers asitofferstopparametersregardingdynamicsandrigid-ity. This ensures higher labour productivity and accuracy of machined parts. The composite solution increasesdampening during machining processes, leading to longer service live of machines and the entire machinery.

Documents

Clue Machinery - April 2016 Issue