Upload
phungcong
View
214
Download
1
Embed Size (px)
Citation preview
CME-12 Continuous excavator
The CME-12 features a front-mounted cutter, feed conveyor, underhung transfer chute and rear-mounted discharge conveyor. Originally designed for open pit coal mining, it has been recognized as an efficient and effective system suitable for other applications.
CME-12 Continuous excavator
Features• Variable discharge height from 1.5 m to 6.7 m• 140º discharge conveyor swing• Use for overburden, partings, coal, compact clay,
or any friable material• Shrouded cutter minimizes spillage• Horizontal rotary cutter cuts smooth floor for
crawler operation• Can work on vertical face or in thin horizontal
seam• Highly maneuverable with simple control system• Simultaneous excavation and loading eliminates
rehandling• Minimum dust generation• No clean-up or assist machinery required
Specifications
Nominal Capacity up to 900 tph
Cutter Width 3.66 m
Cutter Elev. Range 0.15 m to 4.30 m
Belt Width (transfer conveyor) 1.06 m
Belt Width (discharge conveyor) 1.06 m
No. of Tracks 2
Low Travel Speed up to 20.0 m/min.
High Travel Speed up to 75.0 m/min.
Diesel Power 354.2 kW
Conveyor Drives Hydraulic
Track Drives Hydraulic
Machine Weight 45,000 kgSpecial features and modifications available upon request
Copyright © 2015 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth is a (registered) trademark of FLSmidth A/S. This brochure makes no offers, representations or warranties
(express or implied), and information and data contained in this brochure are for general reference only and may change at any time.
Rev
. 01 S
EP k
ls-u
s
FLSmidth’s RAHCO® CME-12 Continuous Excavator is capable of excavating at a capacity of 630 – 900 tph
FLSmidth USA, Inc.Spokane Operations605 E. Holland Ave, Suite 300Spokane, WA 99205USATel +1 509 467 0770Fax +1 509 466 [email protected]