CMP & SUPPLY CO

Connecticut DOT DBE Certified

Tel: 207-487-3681 Fax: 207-487-3684

Website: www.cmpandsupply.com

2015

http://www.cmpandsupply.com/

CMP & SUPPLY CO.

2 TEL: 207-487-3681 EMAIL:[email protected] FAX: 207-487-3684

Payment:

Our terms are Net 30 Days.

Warranty:

CMP & Supply neither makes, nor shall we be bound by any other warranty, express or implied, statutory

or otherwise. Under no circumstances shall CMP & Supply be liable for any loss, damage, expense or

consequential damage of any kind arising from the use or the inability to use any of our products.

Pricing:

Prices are subject to change without notice, and unless specified differently on CMP & Supply’s

confirmation, orders will be shipped at pricing in effect on date of shipment. Prices quoted herein are exclusive

of all taxes and shall remain the sole responsibility of the buyer. CMP & Supply shall not be liable for any

delays due to causes beyond its control such as but not limited to: acts of God, labor dispute, or transportation or

supply difficulties. We reserve the right to adjust catalog prices at any time without prior notice. Any product

shortage or damaged material must be reported to CMP & Supply within five working days of receipt.

Acceptance of our product indicates Purchaser’s acceptance of these Terms and Conditions.

Cancellations or changes to an open order:

Customer must notify CMP & Supply immediately to cancel an item on an order that has not been

processed or shipped. Special products are non-returnable or non-cancelable once product is shipped.

Surcharges:

Surcharges may be applied on certain products.

Returned Merchandise:

CMP & Supply reserves the right to refuse cancellations or returns. Seller has sole discretion to determine

the value at which merchandise returned will be credited. Returned merchandise is subject to applicable freight

charge and a 20% restocking fee.

TERMS & CONDITIONS

CMP & SUPPLY CO.

TEL: 207-487-3681 EMAIL: [email protected] FAX: 207-487-3684 3

Vendor Listing A-Z Partial listing

3-IN-ONE

3M

Aearo

Ajax

Allen

Ames Tru Temper

Anthony Cylinder Carts

Apex

Arcair

Arrow

Astro Pneumatic

ATA Tools

Atlas

Avesta

Band-It

Benzomatic

Bernard

Bessy Clamps

Bosch

Boss

Bostitch

C S Unitec

Camel

Cam-Lok

Campbell

Channel Lock

Comeaux Caps

Contour

Cooper Tools

Crescent

Crews

Delta

Dewalt

Dicke Safety

Direct Wire & Cable

Duracell

Duragloss Dykem/Dymon/Mark-

Tex

Dynaflux

Eagle Brushes

Eagle Mfg.

E-A-R plugs

Energizer

Enerpac

Ever ready

FeatherLight Ladders

Fend All

Fill-Rite

First Aid Only

Flame Tech

Flange Wizard

G.C. Fuller

Gatorade

Georgia Pacific

Gererico

Gilbreth Industries

Gojo

Golden Empire Co.

Goss Equipment

Gray

Guardian

H.K. Porter

Hanson

Harris

Henkel

Hitachi

Hobart

Howard Leight

Huntsman

Igloo

Impact

Impacto

Irwin Industries

J.W. Harris

Jackson Products

Jaguar Plastics

Jamco Products

Johnson Diversey

Justrite

Kidde

Kimberly-Clark

Kleen Products

Kleenex

Klein Tool

Krylon

Kutol

Lakeland Industries

Lava

Legacy

Lenco Products

Loctite

Lufkin

Magnaflux

Makita

Master Lock

Master Power

MCR Memphis

Memphis

Metabo Power Tools

Michigan Pneumatic

Milwaukee

Moldex

MSA

National Marker

Nelco New England Twist

Drill

North

Norton

Oetiker

Oreck

Patco Air Tools

Pearson

Phoenix Rod Ovens

Porta-Band

Powers Fasteners

Profax

Proto

Pyramex

Rod Guard

Rubbermaid

Saf-T-Cart

Sharpie

Shop-Vac

Shurlite

Sioux Tools

SK Hand Tools

Skil

Smith Equipment

Solo Cup

SPC

Sperian

Spotshot

Squincher

Stanley

Streamlight

Sumer

Superior Fitting

Sylvania

Tempil Products

Texas Pneumatic

Thermacut

Thermal Dynamics

Tweco

UltraSafe

Unibit

Unisan

Uniweld

Urrea

Uvex

Vertex Standard

Victor

VonDrehle Corp.

Walter Kidde

WD-40

Weiler

Weiler Brush

Weld-Air Products

Weldcraft

Welding Nozzle

Weller

Western Enterprises

Wilson Safety Curtains

Wilton

Wiss

Wright Tool

Wypall

mailto:[email protected]

CMP & SUPPLY CO.


A Annular Cutters 13

Arc Welding Electrodes 45

B

Back-up Pads 23

Barricade Tape 61

Batteries 61

Beam Clamps & Trolleys 63

Bench Wheel 20

Blades

Band Saw 19

Circular-Saw 19

Cut-Off 17

Hack Saw 14

Hole Saw 12

JigSaw 14

Reciprocating 14

Boots 58

Burrs 24

C Cable Connectors 44

Cable Cover 32

Carabiners 59

Carbide Burrs 24

Carbon Arc Electrodes & Torches 46

Chain Hoist 63

Chemicals 7

Circular Saw Blades 19

Clamps, Ground 44

Clothing 58

Contact Tips 35-36

Cups, Crimped 25

Cups, Knot 25

Cups, Shield 43

Cups, Tig 31

Cut-Off Wheels 17

Cutting Tips 2

D Diffuser, Mig 39

Disc, Fiber 23

Disc, Flap 22

Drill Bits 9-11

Drop Lights 61

E Ear Protection 55

Electrodes, Arc Welding 45

Electrodes, Carbon Arc 46

Electrodes, Tungsten 33

Electrode Holders 44

Eye Glass Cords 53

Eye Protection 51-53

F Fall Protection 59

Fiber Discs 23

Fire Detectors 57

Fire Extinguishers 57

First Aid 58

Flashlights 61

Flint 28

Flap Wheel Discs 22

Flap Wheels & Arbors 21

Flow Meters & Gauges 26

G Gauges 26

Gas Lens, Tig 32

Glasses, Safety 51-53

Gloves 54-55

Goggles 51-53

Gouging Torches & Electrodes 46

Gouging Tips 27

Grinding Wheels 15-16

Ground Clamps 44

Gas Kits 26

Guns, Mig 34

H Hack Saws 14

Hand Cleaners 7

Hard Hats 60

Harnesses 60

Hearing Protection 55

Helmets, Welding 47-48

Hoists 63

Hole Saws 12

Hose 28

I-J-K Insulator, Torch 30

Insulator, Mig 39

Janitorial Supplies 6-8

JigSaw Blades 14

L Lanyards 59-60

Levels 64

Lever Hoists 63

Lighting 61

Life Lines 60

Liners, Helmet 60

Liners, Mig Gun 39

Lugs, Cable 44

M

Mandrel 17

Masking Tape 61

Masonry Drill Bits 11

Mig:

Contact Tips 35-36

Gas Diffusers 39

Gloves 54

Guns 34

Insulators 39

Liners 39

Nozzles 37-38

Welding Wires 40-42

Mounted Points 24

N Non-Woven Pads 19

O Oxy/Acetylene Equipment 26-27

P

Pads, Non-Woven 19

Paint Brushes 25

Paper Products 6

Pins, center 14

Plasma 42-43

Plates, Cover 49

Quartz Light Bulbs & Fixtures 61

R Raingear 58

Rags 8

Reciprocating Saw Blades 14

Regulators, Inert Gas 26

Respirators 56

Retractables 60

Contents

CMP & SUPPLY CO.


S Saw Blades:

Band 19

Circular 19

Hack 14

Hole 12

Reciprocating 14

Shop Pads 19

Signage 57

Silver & Deming Drill Bits 10

Soaps 7

Soapstone 28

Straight Shank Masonry Drill Bits 11

T Tapes 61

Tape Measures 64

Tig: 29-31

Tungsten 33

Welding Wire 44

Tip Cleaners 28

Tips, Cutting, 27

Torch Handle 30

Torches:

Tig 29

Traffic Vests 58

Trash Bags 8

Trolleys 63

Twin Oxygen/Fuel Gas Hose 28

U-V

Vests, Safety 58

Visors 53

W Welding:

Cable Connectors 44

Clothing 55

Gloves 54-55

Goggles 53

Helmets & Hoods 47-48

Jacket 58

Winter Liners 50



PAPER PRODUCTS

ITEM# DESCRIPTION PRICE

SBF52231 2 ply paper towel 100 sheets 30 rolls/cs $28.75

SBF11230 Toilet Tissue 2 ply 96 rolls per carton $49.95

BATH T23633 9”X3.7 2 Ply Jumbo Bath Tissue – 12/case $26.51

HWRTBR350 Hardwound Roll Towel Brown 350' - 12 rolls/cs $26.25

HWRTBR600 Hardwound Roll Towel Brown 600-12 rolls/cs $38.00

HWRT-WT600 Hardwound Roll Towel White 600 12 rolls/cs $49.00

JUMBO SHOP ROLL 10” X 4750’ $55.00

CPRT 7200E-3 Center-Pull Towels, 2 ply 8"x600' per roll 6 roll/cs $26.82

Partial Listing - We carry a full line of paper and dispensers for all of your paper needs.

Please call for more information.

CMP & SUPPLY CO.


SOAPS – CLEANERS – CANLINERS - RAGS


GOJ 5161 GOJO Luxury Foam soap 1 1250 ml. bottle $16.15

GOJ7255 GOJO Natural Orange Pumice 1- 2000 ml bottle $18.94

GOJ7556 GOJO Natural Orange Pumice 1-5000 ml bottles $38.99

4567 Super Scrub Green w/scrubbers 2 ltr bottle $22.69

458189 Dial Antibacterial 1 gallon $15.25

458180 Dial Antibacterial gold bar soap 1 bar $1.09

COX 97326 Pine Sol Disinfectant deodorizer 24oz bottle $5.52

DYM 42272 SCRUBS in a bucket 6/case 72 count $79.16

28707706 Kresto Kwik Wipes 6/tubs per cs 70 count $79.00

494052 Simple green all-purpose biodegradable 1 gal. $14.17



848987 Cleaner, Mop & Glo 64 oz. $12.51

807729 Glass Cleaner, Sustainable Earth 1 gallon $ 6.85

BPR919537-1 Brighton One step Floor Cleaner 1 gal $23.95

672160 Cleaner, Spic and Span, Floor 1 Gallon $38.98

RAGS-COLOR-T Reclaimed colored t-shirt rags 50lb. box $50.00

RAGS –WHITE-T Reclaimed White T-shirt rags 50 lb. box $68.75

CANLINERS – partial listing call for more sizes!


864786 Can liner 10 gallon black 500/cs $21.00

814876 Can liner 33 gal. white 150/c $18.99

814856 Can liner 33x40 33 gallon black 250/cs $24.85

814884 Can liner 40-45 gal clear 250/cs $26.75

814888 Can liner 60 gal black 100/cs $41.90

847252 Can liner 16 gal clear 1000/cs $46.54

CMP & SUPPLY CO.


SIZE PKG ITEM # PRICE

1 12 J2-01 1.25

2 12 J2-02 1.25

3 12 J2-03 1.25

4 12 J2-04 1.25

5 12 J2-05 1.25

6 12 J2-06 1.25

7 12 J2-07 1.25

8 12 J2-08 1.25

9 12 J2-09 1.25

10 12 J2-10 1.25

11 12 J2-11 1.25

12 12 J2-12 1.25

13 12 J2-13 1.25

14 12 J2-14 1.25

15 12 J2-15 1.25

16 12 J2-16 1.25

17 12 J2-17 1.25

18 12 J2-18 .88

19 12 J2-19 .88 20 12 J2-20 .88 21 12 J2-21 .88 22 12 J2-22 .88 23 12 J2-23 .88 24 12 J2-24 .88 25 12 J2-25 .88 26 12 J2-26 .88 27 12 J2-27 .88 28 12 J2-28 .67

29 12 J2-29 .67 30 12 J2-30 .67 31 12 J2-31 .67 32 12 J2-32 .67 33 12 J2-33 .67 34 12 J2-34 .67 35 12 J2-35 .67 36 12 J2-36 .67 37 12 J2-37 .67 38 12 J2-38 .67 39 12 J2-39 .67 40 12 J2-40 .67

SIZE PKG ITEM # ITEM # #PRICE

1/16 12 J-116 JB-116 .56

5/64 12 J-564 JB-564 .56

3/32 12 J-332 JB-332 .56

7/64 12 J-764 JB-764 .56

1/8 12 J-18 JB-18 .56

9/64 12 J-964 JB-964 .67

5/32 12 J-532 JB-532 .67

11/64 12 J-1164 JB-1164 .67

3/16 12 J-316 JB-316 .67

13/64 12 J-1364 JB-1364 .97

7/32 12 J-732 JB-732 .97

15/64 12 J-1564 JB-1564 .97

1/4 12 J-14 JB-14 .97

17/64 12 J-1764 JB-1764 1.78

9/32 12 J-932 JB-932 1.79

19/64 6 J-1964 JB-1964 1.99

5/16 6 J-516 JB-516 1.88

21/64 6 J-2164 JB-2164 2.33

11/32 6 J-1132 JB-1132 2.55

23/64 6 J-2364 JB-2364 1.96

3/8 6 J-38 JB-38 2.79

25/64 6 J-2564 JB-2564 3.12

13/32 6 J-1332 JB-1332 3.57

27/64 6 J-2764 JB-2764 3.73

7/16 6 J-716 JB-716 3.94

29/64 6 J-2964 JB-2964 4.33

15/32 6 J-1532 JB-1532 4.59

31/64 6 J-3164 JB-3164 4.71

1/2 6 J-12 JB-12 4.65



SIZE ITEM # PRICE

17/32 SD3-3364 9.91

9/16 SD3-916 10.45

19/32 SD3-1932 11.39

5/8 SD3-58 11.94

21/32 SD3-2132 12.67

11/16 SD3-1116 13.37

23/32 SD3-2332 13.79

3/4 SD3-34 14.41

25/32 SD3-2532 15.40

13/16 SD3-1316 15.93

27/32 SD3-2732 16.66

15/16 SD3-1516 18.90

31/32 SD3-3132 20.64

1 SDL3-1 22.29

1-1/16 SDL3-1116 25.38

1-1/8 SDL3-118 28.67

1-3/16 SDL3-1316 32.21

1-1/4 SDL3-114 34.86

SIZE PKG ITEM # PRICE

1/16 12 C1-116 1.08

5/64 12 C1-564 1.08

3/32 12 C1-332 1.08

7/64 12 C1-764 1.17

1/8 12 C1-18 1.23

9/64 12 C1-964 1.35

5/32 12 C1-532 1.61

11/64 12 C1-1164 1.73

3/16 12 C1-316 2.01

13/64 12 C1-1364 2.44

7/32 12 C1-732 2.44

15/64 12 C1-1564 2.71

1/4 12 C1-14 2.71

17/64 12 C1-1764 3.76

9/32 12 C1-932 4.15

19/64 6 C1-1964 4.01

5/16 6 C1-516 4.11

21/64 6 C1-2164 4.59

11/32 6 C1-1132 4.59

23/64 6 C1-2364 5.83

3/8 6 C1-38 5.83

25/64 6 C1-2564 6.33

13/32 6 C1-1332 7.00

27/64 6 C1-2764 7.49

7/16 6 C1-716 8.01

29/64 6 C1-2964 8.77

15/32 6 C1-1532 9.50

31/64 6 C1-3164 10.14

1/2 6 C1-12 10.05

17/32 CSD-1732 33.06 15/16 CSD-1516 73.03

9/16 CSD-916 35.00 31/32 CSD-3132 74.42

19/32 CSD-1932 41.37 1 CSDL-1 74.42

5/8 CSD-58 41.79 1-1/16 CSDL-

1116

102.58

21/32 CSD-2132 40.21 1-1/8 CSDL-118 129.74

11/16 CSD-1116 41.32 1-3/16 CSDL-

1316

141.63

23/32 CSD-2332 43.11 1-1/4

13/16 CSD-1316 52.27

27/32 CSD-2732 62.90

7/8 CSD-78 63.74

29/32 CSD-2932 65.53

SIZE ITEM # PRICE SIZE ITEM PRICE

CMP & SUPPLY CO.


DRILLS BITS

SIZE ITEM # PRICE

1/4 WS6-14 1.16

3/8 WS6-38 1.22

1/2 WS6-12 1.39

5/8 WS6-58 1.67

3/4 WS6-34 1.89

7/8 WS6-78 2.03

1 WS6-1 2.28

1-1/4 WS6-114 2.92

1-1/2 WS6-112 3.61

1/4”-1”

6 piece

set

WS6 8.02

SIZE ITEM # LENGTH PRICE

1/4 MD6-146 6 2.09

5/16 MD6-5166 6 2.40

3/8 MD6-386 6 3.13

5/8 MD6-586 6 5.74

1 MD6-1 6 10.46


3/8 MD12-38 12 7.84

1/2 MD12-12 12 8.63

5/8 MD12-58 12 13.00

3/4 MD12-34 12 15.63

7/8 MD12-78 12 18.90

1 MD12-1 12 22.84


1/2 MD18-12 18 12.53

5/8 MD18-58 18 16.06

3/4 MD18-34 18 17.95

7/8 MD18-78 18 26.21

1 MD18-1 18 32.37



HOLE SAWS, ACCESSORIES

ITEM # DESC. PRICE

HSKE-8 8-PIECE ELECTRICIANS KIT

includes 7/8, 1-1/8, 1-3/8, 1-3/4, 2

and 2-1/2 hole saws and 2 arbors

59.50

HSKM14 14-PIECE INDUSTRIAL KIT

includes 3/4, 7/8, 1, 1-1/4, 1-3/8, 1-

1/2, 1-3/4, 2, 2-1/4, 2-1/2, and 3

hole saws and 3 arbors

99.50

HSKP-8 8-PIECE PLUMBER’S KIT

includes 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4

and 2-1/4 hole saws and 2 arbors.

59.50

HSA1 3/8” shank hole saw adapter .Fits

hole saws 9/16”-1-1/8”

7.17

HSA2 7/16” shank hole saw adapter. Fits

hole saws 1-1/4”-6”

12.98

HSA4 7/16” shank hole saw adapter. Fits

hole saws 9/16”-1-1/8”

5.63

HSA10 3/8”shank hole saw adapter. Fits

hole saws 1-1/4”-6”0

12.63

SIZE ITEM # PRICE SIZE ITEM PRICE

5/8 HS58 5.72 2-1/4 HS214 9.73

11/16 HS1116 6.30 2-5/16 HS2516 9.68

3/4 HS34 5.72 2-3/8 HS238 9.74

13/16 HS1316 6.24 2-1/2 HS212 10.29

7/8 HS78 5.72 2-9/16 HS2916 10.29

15/16 HS1516 6.31 2-5/8 HS258 10.29

1 HS1 5.96 2-3/4 HS234 10.80

1-1/16 HS1116 7.49 2-7/8 HS278 10.71

1-1/8 HS118 5.96 3 HS3 10.72

1-3/16 HS1316 6.51 3-1/8 HS318 12.11

1-1/4 HS114 6.24 3-1/4 HS314 12.11

1-5/16 HS1516 7.65 3-3/8 HS338 12.54

1-3/8 HS138 6.46 3-1/2 HS312 13.04

1-7/16 HS1716 7.00 3-5/8 HS358 13.89

1-1/2 HS112 6.65 3-3/4 HS334 14.32

1-9/16 HS1916 6.96 3-7/8 HS378 15.96

1-5/8 HS158 7.39 4 HS4 16.78

1-11/16 HS11116 6.46 4-1/8 HS418 20.35

1-3/4 HS134 7.98 4-1/4 HS414 20.35

1-13/16 HS11316 7.94 4-1/2 HS412 20.95

1-7/8 HS178 8.05 4-3/4 HS434 23.25

2 HS2 8.30 5 HS5 25.72

2-1/16 HS2116 9.66 5-1/2 HS512 29.95

2-1/8 HS218 9.66 6 HS6 37.71

CMP & SUPPLY CO.


ANNULAR CUTTERS

Suitable for all drilling machines with ¾” drive. 3” and 4” also available. Please call for pricing.

Cutter

Diameter

1” Depth

Part #

Price 2” Depth

Part #

Price

7/16” 6-1-114 20.00 6-1-214 26.00

1/2” 6-1-116 21.50 6-1-216 28.50

9/16” 6-1-118 24.50 6-1-218 32.50

5/8” 6-1-120 26.00 6-1-220 35.00

11/16” 6-1-122 27.00 6-1-222 39.00

3/4” 6-1-124 28.00 6-1-224 43.00

13/16” 6-1-126 30.00 6-1-226 45.00

7/8” 6-1-128 32.00 6-1-228 48.00

15/16” 6-1-130 34.50 6-1-230 51.50

1” 6-1-132 37.00 6-1-223 56.00

1-1/16” 6-1-134 38.00 6-1-234 57.50

1-1/8” 6-1-136 44.00 6-1-236 66.00

1-3/16” 6-1-138 46.00 6-1-238 70.00

1-1/4” 6-1-140 47.00 6-1-240 71.50

1-5/16” 6-1-142 50.00 6-1-242 75.50

1-3/8” 6-1-144 64.00 6-1-244 79.00

CENTER PINS

Item # Description Price

7-3-102 1” center pin 9.50

7-3-201 2” center pin 9.50

7-3-302 3” center pin 16.41



RECIPROCATING, BLADES

ITEM# LENGTH WIDTH TEETH PRICE APPLICATION

RB414 4” 5/8” 14 1.50 Metal over 1/8”

RB418 4” 5/8” 18 1.50 Heavy-gauge metal/pipe/conduit

RB424 4” 5/8” 24 1.50 Thin metal tube/pipe under 18 gauge

RB614 6” 3/4” 14 1.62 Metal over 1/8”

RB618 6” 3/4” 18 1.62 Heavy-gauge metal/pipe/conduit

RB624 6” 3/4” 24 1.62 Thin metal tube/pipe under 18gauge

RB818 8” 3/4” 18 2.18 Metal over 18 gauge – long reach

RB814 8” 3/4” 14 2.18 Metal over 1/8” angle stock

RB1214 12” 3/4” 14 3.57 Metal over 1/8” – long reach

HACKSAW, BLADES AND FRAME ITEM# LENGTH WIDTH TEETH PRICE APPLICATION

HHSB14 12” 1/2” 14 1.20 Heavier metals, angles

HHSB18 12” 1/2” 18 1.20 Metal over 1/8”, pip, conduit

HHSB24 12” 1/2” 24 1.20 General purpose – 1/16” – 1/4”

HHSB32 12” 1/2” 32 1.20 Thin metal, fine cutting

JigSaw, BLADES

Wood Cutting – 1/4” Universal Shank

ITEM# LENGTH TEETH PRICE APPLICATION

JS6 3-1/2” 6 1.38 Thick wood, fast cutting

JS10 3-1/2” 10 1.38 Smooth cutting –wood

JSS10 3-1/2” 10 1.38 Wood scroll

Metal Cutting – 1/4” Universal Shank


JS14 3” 14 1.38 Metal over 1/4”, plastic, fiber board

JS18 3” 18 1.38 Metal over 1/8”, conduit, tubing

JS24 3” 24 1.38 Thin metal, fine cutting, panels

JS32 3” 32 1.38 Extra-fine cutting

Woodcutting –Bosch Shank


BJS6 3-3/4” 6 1.38 Fast cutting, thick material, wood

BJS10 3-3/4” 10 1.38 General purpose wood

BJS10S 3-3/4” 10 1.38 Smooth cut, scroll

Metal Cutting – Bosch Shank ITEM# LENGTH TEETH PRICE APPLICATION

BJS14 3” 14 1.38 Metal over 1/8” plastic, fiberglass

BJS18 3” 18 1.38 Metal over 18 gauge, plastic, fiberglass

BJS24 3” 24 1.38 Thin metal, fine cutting

CMP & SUPPLY CO.


GRINDING WHEELS, TYPE 27 DEPRESSED CENTER Camel Brand

USA made flap discs. Fastest grain removal in the marketplace for carbon based steels (26% more than the

competition).

Recommended for aggressive use and heavy duty applications.

Active grinding agent provides cool cutting with light pressure.

Premium Zirconia Aluminum grain with a poly/cotton heat treated backing

A: Aluminum Oxide ZA: Zirconia & Aluminum Oxide mixture

WA: White Aluminum Oxide

Right Angle Grinder

4 1/2” PART # DESCRIPTION SPEC. $ EACH

45002 4- 1/2” x .045 x 7/8 ZA60 $1.18

45004 4- 1/2” x .045 x 7/8 A46 $1.46

45103 4- 1/2” x .045 x 7/8” A60 $1.52

45003 4- 1/2" x .045 x 7/8” WA60 $1.40

45099 4- 1/2” x .045 x 7/8” A60 $1.92

70094 4- 1/2” x .075 (5/64) x 7/8 A46 $2.82

70095 4- 1/2” x .075 (5/54) x 5/8-11 A46 $4.10

45020 4- 1/2” x 3/32 x 7/8 A36 $1.47

45021 4- 1/2” x 3/32 x 5/8-11 A36 $3.68

45107 4- 1/2” x 1/8 x 7/8 A24R $1.35

45108 4- 1/2” x 1/8 x 5/8-11 A24R $2.63

35666 4- 1/2” x 1/8 x 7/8 A24T $1.84

35664 4- 1/2” x 1/8 x 5/8-11 A24T $3.13

36255 4- 1/2” x 1/4 x 7/8 A24R $1.17

36256 4- 1/2” x 1/4 x 5/8-11 A24R $2.32

5” PART # DESCRIPTION SPEC. $ EACH

45005 5 x .045 x 7/8 ZA60 $1.98

70114 5 x .045 x 7/8 A46 $1.76

45006 5 x .045 x 7/8 WA60 $1.62

70096 5 x .075 (5/64) x 7/8 A46 $2.96

70097 5 x .075 (5/64) x 5/8-11 A46 $4.25

45022 5 x 3/32 x 7/8 A36- $1.79

45023 5 x 3/32 x 5/8-11 A36- $3.07

35675 5 x 1/8 x 7/8 A24R l $1.63

35676 5 x 1/8 x 5/8-11 A24R $2.92

45200 5 x 1/8 x 7/8 A24T $1.79

45201 5 x 1/8 x 5/1-11 A24T $3.07

36257 5 x 1/4 x 7/8 A24R $1.33

36258 5 x 1/4 x 5/8-11 A24R $2.47



GRINDING WHEELS, TYPE 27 DEPRESSED CENTER USA made flap discs. Fastest grain removal in the marketplace for carbon based steels (26% more than

the competition).

Recommended for aggressive use and heavy duty applications. Right Angle Grinder

Active grinding agent provides cool cutting with light pressure.

Premium Zirconia Aluminum grain with a poly/cotton heat treated backing

A: Aluminum Oxide ZA: Zirconia & Aluminum Oxide mixture

WA: White Aluminum Oxide


45007 6 x .045 x 7/8 ZA60 $1.57

70115 6 x .045 x 7/8 A46 $2.06

45098 6 x .045 x 7/8 A60 $2.19

45017 6 x .045 x 7/8 WA60 $1.72

45024 6 x 3/32 x 7/8 A36 $2.40

35630 6 x 1/8 x 7/8 A24R $2.40

36224 6 x 1/8 x 5/8-11 A24R $2.76

36259 6 x 1/4 x 7/8 A24R $1.94

36260 6 x 1/4 x 5/8-11 A24R $2.96


45008 7 x 1/16 x 7/8 ZA60 $2.33

45009 7 x 1/16 x 7/8 WA60 $2.53

45026 7 x 3/32 x 7/8 A36 $2.73

45027 7 x 3/32 x 5/8-11 A36 $4.30

35634 7 x 1/8 x 7/8 A24R $2.42

36226 7 x 1/8 x 7/8 A24R $3.27

36229 7 x 1/8 x 7/8 A24T $1.99

36230 7 x 1/8 x 5/8-11 A24T $3.49

36261 7 x 1/4 x 7/8 A24R $2.16

36262 7 x 1/4 x 5/8-11 A24R $3.66

9” PART # DESCRIPTION PEC. $ EACH

45047 9 x 1/16 x 7/8 ZA60 $2.85

35648 9 x 1/8 x 7/8 A24R $2.89

35649 9 x 1/8 x 5/8-11 A24R $4.46

35662 9 x 1/8 x 7/8 A24T $3.63

35663 9 x 1/8 x 5/8-11 A24T $5.21

36263 9 x 1/4 x 7/8 A24R $3.46

36264 9 x 1/4 x 5/8-11 A24R $4.96

CMP & SUPPLY CO.


Camel Brand

CUT-OFF WHEELS, TYPE 1

PART # DESCRIPTION SPEC. $ EACH

2”

59111 2 x 1/32 x 3/8 A60 $ .60

59112 2 x 1/16 x 3/8 A60 $ .60

59113 2 x 1/8 x 3/8 A24 $ .60


59105 3 x 1/16 x 3/8 A36 $.70

45086 3 x 1/16 x 3/8 A60 $.70

59114 3 x 1/8 x 3/8 A24 $.70

59103 3 x 1/32 x 3/8 A60 .70

59105 3 x 1/16 x 3/8 A36 .70


59107 4 x 1/32 x 3/8 A60 $.70

59108 4 x 1/16 x 3/8 A36 $.70

45087 4 x 1/16 x 3/8 A60 $.1.17

59116 4 x 1/8 x 3/8 A24 $.73

36180 4 x 1/32 x 3/8 ZA60 $1.67

36178 4 x 1/16 x 3/8 ZA36 $1.96

Cut-Off Wheel Mandrel Adaptor


48227 1/4-3/8” MANDREL ADAPTOR Type 1 $ 5.82

48245 3/8” -24 MANDREL ADAPTOR Type 1 $ 4.86

A: Aluminum Oxide; ZA: Zirconia & Aluminum Oxide C: Silicon Carbide (stone/concrete)

WA: White Aluminum Oxide. 045 wheels extra thin for faster cutting with less resistance.



CUT-OFF WHEELS, TYPE 1 cont.


37573 7 x .045 x 5/8 A60 $2.59

37574 7 x .045 x 5/8 C30 $3.02

35573 7 x 3/32 x 5/8 A24 $2.66

35574 7 x 3/32 x 5/8 C24 $3.02

59109 7 x 3/32 x 5/8 A24 Fast Cut $1.60

59110 7 x 3/32 x 5/8 C24 Fast Cut $1.60


70111 10 x 1/7 x 5/8 A24 $2.99

35577 10 x 1/16 x 5/8 A24 $4.46

35579 10 x 1/8 x 5/8 A24 $4.49

35580 10 x 1/8 x 1 A24 $4.49


70105 12 x 1/8 x 1 A24 $3.47

35581 12 x 1/8 x 1 A24 $4.78


36233 14 x 1/8 x 1 A24 $3.79

35582 14 x 1/8 x 1 A24 $5.13

37671 14 x 1/8 x 1 C24 $6.38

45089 14 x 1/8 x 1 WA24 $6.38


70106 16 x 5/32 x 1 A24 $6.76

35584 16 x 5/32 x 1 A24 $11.85


70107 18 x 5/32 x 1 A24 $10.83

CMP & SUPPLY CO.


CUT-OFF WHEELS, TYPE 1 cont.


70108 20 x 5/32 x 1 A24 $15.53

70109 20 x 3/16 x 1 A24 $17.50

35851 20 x 7/32 x 1 A30 $35.99

CIRCULAR SAW BLADES

10-24-825B 8-1/4” 24 tooth carbide tip 5/8”arbor $11.43

10-40-825B 8-1/4” 40 tooth carbide tip 5/8” arbor $12.95

PORTABAND BLADES

61-051830 44 7/8” 24 tooth Porta-band blade $5.91

IRW3074002P25 44 7/8" 18 tooth Irwin Porta Band blade $5.91

BSB10 44 7/8 10 tooth PortaBand saw blade $5.91

STANDARD NON-WOVEN HAND PADS Engineered for surface preparation

Maroon pads for removing rust and corrosion and surface preparation and cleaning.

Green pads for cleaning all types of equipment, metal surfaces and durable surfaces.

White pads for cleaning sensitive surfaces, metal, Formica, solid surfaces, glass & mirror.

36241 Maroon, 6”x 9” hand pad- all purpose package of 10 $8.00

36242 Green, 6” x 9” hand pad- Medium duty package of 10 $8.00

36243 White, 6” x 9” hand pad- Light duty package of 10 $8.00



BENCH WHEELS, TYPE 1

PART # DESCRIPTION SPEC. $ EACH PART # DESCRIPTION SPEC. $ EACH

38001 6” x 1/2” x 1 A24 $11.68 38011 6 x 1 x 1” A24 $14.26

38003 6” x 1/2” x 1 A46 $11.68 38012 6 x 1 x 1” A36 $14.26

38004 6” x 1/2” x 1 A60 $11.68 38013 6 x 1 x 1” A46 $14.26

38005 6” x 1/2” x 1 A80 $11.68 38014 6 x 1 x 1” A60 $14.26

38015 6 x 1 x 1” A80 $14.26

38006 6 x 3/4” x 1 A24 $13.04 38016 7 x 1 x 1” A24 $16.79

38007 6 x 3/4” x 1 A36 $13.04 38017 7 x 1 x 1” A36 $16.79

38008 6 x 3/4” x 1 A46 $13.04 38018 7 x 1 x 1” A46 $16.79

38009 6 x 3/4” x 1 A60 $13.04 38019 7 x 1 x 1” A60 $16.79

38010 6 x 3/4” x 1 A80 $13.04 38020 7 x 1 x 1” A80 $16.79

38021 8 x 1 x 1” A24 $20.63 38026 10 x 1 x 1-1/4” A24 $34.39

38022 8 x 1 x 1” A36 $20.63 38027 10 x 1 x 1-1/4” A36 $34.39

38023 8 x 1 x 1” A46 $20.63 38028 10 x 1 x 1-1/4” A46 $34.39

38024 8 x 1 x 1” A60 $20.63 38029 10 x 1 x 1-1/4” A60 $34.39

38025 8 x 1 x 1” A80 $20.63 38030 10 x 1 x 1-1/4” A80 $34.39

38031 10 x 1-1/2 x 1-1/4” A24 $44.22 38036 12 x 1 x 1-1/4” A24 $54.04

38032 10 x 1-1/2 x 1-1/4 A36 $44.22 38038 12 x 1 x 1-1/4” A46 $54.04

38033 10 x 1-1/2 x 1-1/4 A46 $44.22 38039 12 x 1 x 1-1/4” A60 $54.04

38034 10 x 1-1/2 x 1-1/4 A60 $44.22

38035 10 x 1-1/2 x 1-1/4 A80 $44.22 38041 12 x 1-1/2” x 1-1/4” A24 $67.72

38042 12 x 1-1/2” x 1-1/4” A36 $67.72

38043 12 x 1-1/2” x 1-1/4” A46 $67.72

38044 12 x 1-1/2” x 1-1/4” A60 $67.72

A: Aluminum Oxide, GC: Green Silicon Carbide, AZ: Premium Blue Aluminum Oxide, WA:

White Aluminum Oxide

CMP & SUPPLY CO.


FLAP WHEELS 1/4” SHANK Made with premium aluminum oxide grain. Grits 120 through 320

available upon request.


39903 1”x 5/8” x 1/4” A60 $2.10

39904 1”x 5/8” x 1/4” A80 $2.10

39907 1” x 1” x 1/4” A40 $1.50

39908 1” x 1” x 1/4” A60 $1.50

39909 1” x 1” x 1/4” A80 $1.50

39915 1-1/2” x 1/2” x 1/4” A60 $1.63

39916 1-1/2” x 1/2” x 1/4” A80 $1.63

39920 1-1/2” x 1” x 1/4” A40 $1.80

39921 1-1/2” x 1” x 1/4” A60 $1.80

39922 1-1/2” x 1” x 1/4” A80 $1.80

39924 2” x 1/2” x 1/4” A40 $2.00

39925 2” x 1/2” x 1/4” A60 $2.00

39926 2” x 1/2” x 1/4” A80 $2.00

39931 2” x 1” x 1/4” A40 $2.12

39932 2” x 1” x 1/4” A60 $2.12

39933 2” x 1” x 1/4” A80 $2.12

41015 2-1/2” x 1/2” x 1/4” A60 $2.50

41016 2-1/2” x 1/2” x 1/4” A80 $2.50

39941 2-1/2” x 1” x 1/4” A60 $2.96

39942 2-1/2” x 1” x 1/4” A80 $2.96

41121 2-1/2” x 1-1/2” x 1/4” A60 $3.59

41122 2-1/2” x 1-1/2” x 1/4” A80 $3.59

41018 3” x 1/2” x 1/4” A60 $3.13

41019 3” x 1/2” x 1/4” A80 $3.13

39947 3” x 1” x 1/4” A40 $3.27

39948 3” x 1” x 1/4” A60 $3.27

39949 3” x 1” x 1/4” A80 $3.27

41513 3” x 1-1/2” x 1/4” A60 $4.92

41514 3” x 1-1/2” x 1/4” A80 $5.22

41044 3” x 2” x 1/4” A40 $5.51

39954 3” x 2” x 1/4” A60 $5.51



FLAP DISCS

Z/A - Zirconia alumina coated, for high-alloyed steel, stainless steel and heat-treated steel. Recommended for aggressive use and heavy duty application.

Grits 80 and 120 also available.

TYPE 27 TYPE 29

PART # PART # DESCRIPTION GRIT PRICE

42300 42320 4-1/2 x 7/8 24 $3.50

41701 41721 4-1/2 x 7/8 36 $2.86

41702 41722 4-1/2 x 7/8 40 $2.86

41704 41724 4-1/2 x 7/8 60 $2.86

42310 42330 4-1/2 x 5/8-11 24 $4.50

41711 41731 4-1/2 x 5/8-11 36 $4.50

41712 41732 4-1/2 x 5/8-11 40 $4.50

41714 41734 4-1/2 x 5/8-11 60 $4.50

42500 42520 5 x 7/8 24 $3.79

42501 42521 5 x 7/8 36 $3.79

42502 42522 5 x 7/8 40 $3.79

42504 42524 5 x 7/8 60 $3.79

42510 SM 5 x 5/8-11 24 $4.79

42511 42531 5 x 5/8-11 36 $4.79

42512 42532 5 x 5/8-11 40 $4.79

42514 42535 5 x 5/8-11 60 $4.79

53001 53021 6 x 7/8 36 $4.79

53002 53022 6 x 7/8 40 $4.79

53004 53024 6 x 7/8 60 $4.89

53011 53031 6 x 5/8-11 36 $5.89

53012 53032 6 x 5/8-11 40 $5.89

53014 53034 6 x 5/8-11 60 $5.89

42700 42720 7 x 7/8 24 $6.98

41941 41961 7 x 7/8 36 $5.75

41942 41962 7 x 7/8 40 $5.75

41944 41964 7 x 7/8 60 $5.75

41951 41971 7 x 5/8-11 36 $7.32

41952 41972 7 x 5/8-11 40 $7.32

41954 41974 7 x 5/8-11 60 $7.32

CMP & SUPPLY CO.


FIBER DISCS


48011 4-1/2” x 7/8” Box of 25 24 grit $18.75

48014 4-1/2” x 7/8” 50 grit $18.75

48015 4-1/2” x 7/8” 60 grit $18.75 48021 5” x 7/8” 24 grit $20.00

48024 5” x 7/8” 50 grit $20.00

40825 5” x 7/8” 60 grit $20.00

48031 7” x 7/8” 24 grit $26.00

48034 7” x 7/8” 50 grit $26.00

48035 7” x 7/8” 60 grit $26.00

CAMEL BRAND

Back-up Pads

PART # DESCRIPTION/ SPEC. $ EACH

MEDIUM

36204 4 1/2” $7.48

48225 5” $8.91

48222 7” $19.28

Aluminum Oxide designed for long life. 7” discs are available with a depressed center which increases the

amount of disc that can be used. Must be used with back-up pads.

Use with coarse grits

Spiral ribs provide contact points and form channels for air flow, extending disc life 30% - 50%.



CARBIDE BURS, 1/4” SHANK

PART # DESCRIPTION (diameter x length) $ EACH

62319 1/4x5/8” SA-1 Double Cut Flat Head 7.14

62323 1/4x3/4” SA-3 Double Cut Flat Head 8.92

62328 1/2”x1” SA-5 Double Cut Flat Head 15.09



62377 1/4x5/8” SC-1 Double Cut Cylinder Shape 7.68

62381 3/8x3/4” SC-3 Double Cut Cylinder Shape 9.88

62386 1/2”x1” SC-5 Double Cut Cylinder Shape 15.09

62388 5/8x1” SC-6 Double Cut Cylinder Shape 20.70

62391 3/4x1” SC-7 Double Cut Cylinder Shape 27.90

62404 1/4” SD-1 Double Cut Round Ball 7.97





62423 1/4x3/8” SE-1 Double Cut Oval/Egg 8.24



62429 5/8x1” SE-6 Double Cut Oval/Egg 24.42

62440 1/4x5/8” SF-1 Double Cut Rounded Tree 8.09

62442 3/8x3/4” SF-3 Double Cut Rounded Tree 10.42

62446 1/2x1” SF-5 Double Cut Rounded Tree 15.09



62462 1/4x5/8” SG-1 Double Cut Pointed Tree 8.09

62465 3/8x3/4” SG-3 Double Cut Pointed Tree 10.84

62468 1/2x1” SG-5 Double Cut Pointed Tree 15.09

62505 1/4x5/8” SL-1 Double Cut Radius Cone 8.09

62508 3/8x 1-1/16” SL-3 Double Cut Radius Cone 12.36

62502 1/2x1-1/8” SL-4 Double Cut Radius Cone 17.02

62511 5/8x1-3/16” SL-5 Double Cut Radius Cone 31.56

62522 1/4x1/2” SM-1 Double Cut Pointed Cone 7.97

62524 1/4”x1” SM-3 Double Cut Pointed Cone 8.24

62526 1/2”x7/8” SM-5 Double Cut Pointed Cone 15.64

Double Cut designed to produce smaller chips for faster cutting action. For stainless steel and ferrous

materials. 1/8” shank available upon request.

CMP & SUPPLY CO.


BRUSHES, CARBON STEEL

PART # DESCRIPTION (diameter x length) $ EACH

BRUSHES 60226 1” Pure bristle wood handle paint brush 1.25

60227 1-1/2” Pure bristle wood handle paint brush 1.75

60228 2” Pure bristle wood handle paint brush 2.05

60229 3” Pure bristle wood handle paint brush 2.85

60201 3x19 row scratch brush 1.90

60205 4 x 16 row scratch brush 2.40

END BRUSHES

60578 1” KNOTTED END CARBON .020 WITH 1/4” SHANK 6.19

60592 1”CRIMPED END CARBON .020 WITH 1/4” SHANK 6.50

CRIMPED CUP 60560 3” CUP CRIMP CARBON .014X5/8-11” 6.19

60561 3” CUP CRIMP STAINLESS .014X5/8-11” 13.63

60562 4” CUP CRIMP CARBON .020X5/8-11” 8.89


60564 6” CUP CRIMP CARBON .020X5/8-11” 23.55


KNOT WIRE CUP 60500 3” KNOT WIRE CARBON .014X1/2-3/8” 7.44

60501 3” KNOT WIRE STAINLESS .014X1/2-3/8” 12.88

60502 4” KNOT WIRE CARBON .020X5/8-11” 7.44

60503 5” KNOT WIRE CARBON .020X5/8-11” 10.65

60505 6” KNOT WIRE CARBON . .020X5/8-11” 11.38

CRIMPED WHEEL 60171 3” CRIMPED CARBON W/SHANK .014 w/ 1/4” shank 6.02

60172 3” CRIMPED STAINLESS W/SHANK .014 w/ 1/4” shank 11.04

60150 4” RADIAL CARBON .014X5/8-11” 10.90

60190 6” RADIAL CARBON .014X1/2-5/8” 20.18

TWISTED WHEEL 60001 4” KNOT WIRE CARBON .014 x 5/8-11 11.40

60006 4” KNOT WIRE STAINLESS .014 x 5/8-11 15.66

60013 5” KNOT WIRE CARBON .020 X 5/8-11 18.10

60052 6” KNOT WIRE CARBON .020 X 5/8-11 19.19

60055 6” KNOT STAINLESS .016 X 5/8-1/2 31.40



CUTTING & WELDING


KH370 Airco Style cutting & welding kit $280.00

KL79 Harris Style cutting & welding kit 290.00

WURKS-V Victor style cutting & welding kit 280.00

90 DEGREE TORCHES


54A-21 Airco Style 21” $150.00

40A-21 Harris Style 21” 160.00

830-21 Victor Style 21” 160.00

CA370 Airco Style cutting attachment 120.00

CA43A Harris Style cutting attachment 120.00

780A Victor Style cutting attachment 125.00

98L9 Airco Style handle 105.00

43L9 Harris Style handle 105.00

WH360 Victor Style handle 95.00

GAS REGULATORS

RVT8010 Uniweld Oxygen 2 Stage regulator 185.00

RVT8011 Uniweld Acetylene 2 Stage regulator 185.00

MR8210 Uniweld Oxygen single stage regulator 79.00

MR8211 Uniweld Acetylene single stage regulator 79.00

MR8212 Uniweld Mapp single stage regulator 79.00

FUEL GAS KITS

WB500 Propane Weed Burner 500,000 BTU 69.00

89600 Air Acetylene twister kit 170.00

KT2LP4 LP outfit includes Regulator Handle, 12’ 154.00

Hose, & two tips

CMP & SUPPLY CO.


CUTTING TIPS

VICTOR STYLE


1-101-(size) Oxygen/Acetylene 6 hole sizes (000-8) $5.22

1-112-(size) Oxygen/Acetylene 3 hole (00-4) 17.01

1-118-(size) Oxygen/Acetylene 6 hole 18.28

1-200-(size) Oxygen/Fuel Gas Single Piece 8 hole 14.00

AIRCO STYLE


144-(size) Oxygen/Acetylene 4 hole Medium Preheat (sizes 00-8) $6.00

164-(size) Oxygen/Acetylene 6 hole Heavy Preheat (sizes 00-10) 6.00

183-(size)` Oxygen/Acetylene 6 hole Bent Gouging 34.00

AFS-(size) Oxygen/Fuel Gas Single Piece sizes 31-71 12.50

ASP-(size) Oxygen/Fuel Gas Two Piece 8 preheats, sizes 31-72 10.50

HARRIS STYLE


6290A-(size) Oxygen/Acetylene 6 hole Sizes 00-6 $7.00

6290G-(size) Single piece 34.00

6290VVC-(size) Oxygen/fuel gas Two Piece sizes 40-75 11.00



TWIN WELDING HOSE ITEM# DESCRIPTION PRICE

H12 12-1/2’ 3/16 Single Acetylene Hose Grade R 17.00

H43B 25’ 1/4” Twin Hose Grade R Oxyacetylene 19.00



H32BT 12-1/2’ Oxy LP Gas 3/16” Grade T Twin Hoses 20.00

HT43B 25’ Oxy LP Gas 1/4” Grade T Twin Hoses 28.00



FLASH & FLOW ARRESTORS

TFA100 Torch Style Flash Arrestors Oxygen & Acetylene/Fuel Gas 31.00

RFA100 Regulator Style Flash Arrestors Oxygen & Acetylene/Fuel Gas 33.00

TCV100 Torch Check Valve Oxygen & Acetylene/Fuel Gas 11.92

RCV100 Regulator Check Valve Oxygen & Acetylene/Fuel Gas 12.52

OXY/FUEL GAS, ACCESSORIES

FL34 Single Flint Striker 2.30

FL37 One 5 Flint Renewal 1.50

FL3437TC Single Lighter, w/ 5 Flint Renewals and standard Tip Cleaner 6.56

FL35 Triple Flint Striker 2.85

FL36 One triple flint renewal for FL35 lighter 3.00

FL3536TC Triple Lighter with/Triple Flint Renewal and standard Tip Cleaner 7.75

SSRDK Round Soapstone 6 piece Kit includes holder 3.45

SSRD Round Soapstone Replacements 9.30

SSFLATK Flat Soapstone 6 piece Kit includes holder 2.50

SSFLAT Flap Soapstone Replacements 9.30

W05 B & MC Tank Box Wrench 3.50

W94 BC & MC Combination Wrench for “A” fittings 6.72

HRK26 Hose Repair Kit “B” size hose fittings for 1/4” I.D. hose 65.00

CMP & SUPPLY CO.


TIG

WELDING TORCHES


#9 130 Amp Flexible Air Cooled

TM 9F-12R-S Tig Torch Pack TM9F 130A 12’ 1 pc. cable $45.00

TM 9F-25R-S Tig Torch Pack TM9F 130A 25’ 1 pc. cable 66.00

TM 9FV-12R-S Tig Torch Pack w/Valve TM9FV 130A 12’ 1 pc. cable 53.00



TM 17F-12R-S Tig Torch Pack TM17F 150A 12’ 1 piece cable 60.00

TM 17F-25R-S Tig Torch Pack TM17F 150A 25’ 1 piece cable 73.00




TM 20-25-S Tig Torch Pack TM20 25A 25’ Water Cooled 75.40


TM 18-25-S Tig Torch Pack TM20 350A 25’ Water Cooled 79.61


TM 26FV-12R-S Tig Torch Pack w/Valve TM25FV 200A 12’1 piece cable 81.84

TM 26FV-25R-S Tig Torch Pack w/Valve TM25FV 200A 25’1 piece cable 111.70

TIG GAS HOSE ASSEMBLY

TM 40V77 Hose Assy. Gas 12’ TM18 Ext. 18.00

TM 41V30R Hose Assy. Gas 25’ TM18, 26 23.23



TIG POWER CABLES ITEM# DESCRIPTION PRICE

TM 57Y01R Power Cable Assembly 12’ suit TM9,17 $28.00

TM 57Y03R Power Cable Assembly 25’ suit TM9, 17 $42.00

TM 46V28R Power Cable Assembly 12’ suit TM26 $44.00

TM 46V30R Power Cable Assembly 25’ suit TM26 $74.00

TM 56Y38R Power Cable Assembly 12’ suite TM24 $33.00

TM 56Y97R Power Cable Assembly 25’ suite TM24 $58.00

POWER CABLE ADAPTORS

TM 105Z57 Adaptor Power suit TM9, 17 $5.60

TM 45V62 Adaptor Power suit TM26 $9.00

FLOWMETER

REG10FL SGC-580 Flow meter 0-60 SCFH $55.00

TORCH INSULATORS

TM 18-7 Back Cap Gasket suit TM 17, 18, 26 $1.95

TM 18CG Gasket – Cup suit TM 17, 18, 26 $1.95

TM 53N66 Insulator – Gas Lens Suite TM 24 $2.35

TORCH BACK CAPS

TM 41V24 Back Cap Long suit TM 9,20 $1.75

TM 41V35 Back Cap Medium suit TM 9, 20 $1.65

TM 41V33 Back Cap Short suit TM 9,20 $1.55

TM 57Y02 Back Cap Long suit TM17, 18, 26 $1.25

TM 57Y04 Back Cap Short suit TM 17, 18, 26 $1.15

TORCH HANDLES

H-100R Ribbed handle for # 9, 17 & 24 torches $3.30

CMP & SUPPLY CO.


TIG CUPS, GAS LENS ALUMINA


54N14 #8 1/2” Pink #17, 18, &26 Torch cup 1.10

54N15 #7 7/16” Pink #17, 18, & 26 Torch cup 1.10

54N16 #6 3/8” Pink #17, 18, & 26 Torch cup 1.10

54N17 #5 5/16” Pink #17, 18, & 26 Torch cup 1.10

54N18 #4 1/4” Pink #17, 18, & 26 Torch cup 1.10

57N75 #6 3/8” Large Pink #17, 18, &26 Torch cup 2.30

57N74 #8 1/2” Large Pink #17, 18, &26 Torch cup 2.30

53N58 #4 1/4” Pink #9, 20, & 24 Torch cup 1.00

53N59 #5 5/16”Pink #9, 20, & 24 Torch cup 1.00

53N60 #6 3/8” Pink #9, 20, & 24 Torch cup 1.00

53N61 #7 7/16”Pink #9, 20, & 24 Torch cup 1.00

TIG CUPS, STANDARD ALUMINA

10N44 #12 3/4” Pink #17, 18, & 26 Torch cup 1.00

10N45 #10 5/8”Pink #17, 18, & 26 Torch cup 1.00

10N46 #8 1/2” Pink #17, 18, & 26 Torch cup 1.00

10N47 #7 7/16” Pink #17, 18, & 26 Torch cup 1.00

10N48 #6 3/8” Pink #17, 18, & 26 Torch cup 1.00

10N49 #5 5/16” Pink #17, 18, & 26 Torch cup 1.00

10N50 #4 1/4” Pink #17, 18, & 26 Torch cup 1.00

13N08 #4 1/4” Pink #9, & 20 Torch cup 1.00

13N09 #5 5/16” Pink #9, & 20 Torch cup 1.00

13N10 #6 3/8” Pink #9, & 20 Torch cup 1.00

13N11 #7 7/16” Pink #9, & 20 Torch cup 1.00

13N 12 #8 1/2” Pink #9, & 20 Torch cup 1.00

13N13 #10 5/8” Pink #9, & 20 Torch cup 1.00

53N24 #4 1/4” Pink #24 Torch cup 2.60

53N25 #5 5/16” Pink #24 Torch cup 2.60

53N27 #6 3/8” Pink #24 Torch cup 2.60

TIG, STARTER KITS AK-3 For 18 & 26 series torches. Collets and collet bodies and tungsten in sizes 1/16”, 3/32, 1/8. $32.00

Also includes standard alumina cups in sizes #5,6,7

AK-4 For 20 series torches. Collets and collet bodies and tungsten in sizes 1/16”, 3/32”, 1/8”. $41.00

Also includes standard alumina cups in sizes # 5, 6, 7.

AK-5 For 24 series torches. Collets and collet bodies and tungsten in sizes .040, 1/16”. Also includes $23.00

standard alumina cups in sizes # 4, 5, 6




COLLETS

10N23 1/16” Copper Collet for #17, 18 & 26 torches .75



10N20 5/32”Copper Collet for #17, 18 & 26 torches 1.00

10N24S 3/32” Short Copper Collet for #17, 18 & 26 torches 1.50

10N25S 1/8” Short Copper Collet for #17, 18 & 26 torches 1.50

13N22 1/16” Copper Collet for #9 torches .75



53N14 1/16” Copper Collet for #24 torches 1.25

24C332 3/32” Copper Collet for #24 torches 1.25

53N64 1/16” Copper Collet for #24 torches 1.30

24GLC332 3/32” Copper Collet for #24 torches 1.30

COLLET BODIES GAS LENS

45V25 1/16” Copper Gas Lens for #17, 18 & 26 torches 3.75




45V64 3/32” Large Copper Gas Lens for #17, 18 & 26 torches 5.50

995795 1/8” Large Copper Gas Lens for #17, 18 & 26 torches 5.50

45V43 1/16” Copper Gas Lens for #9 torches 3.20



COLLET BODIES

10N28 1/8” Copper Collet Body for #17, 18, & 26 torches 2.00




17CB20 3/32” & 1/8” Small Copper Collet Body for #17, 18, & 26 torches 1.50

13N27 1/16” Copper Collet Body for #9 torches 1.30



CMP & SUPPLY CO.


CABLE COVERS WC4-10 4”x10’ Woven Tig cover with Zipper $15.89

WC4-23 4”x22’ Woven Tig cover with Zipper $54.00

WC4-23L 4”x23’ Leather cover with snaps $83.00

7” TUNGSTEN, ELECTRODES

1/16” 3/32” 1/8” 5/32”

07WP-(size) Pure Tungsten Electrode 10/pkg. Green 12.00 23.95 38.95 75.95

07WTH-(size) 2% Thoriated Tungsten Electrode Red 12.00 23.95 38.95 90.95

07WL15-(size) 1.5% Lanthanated Tungsten Electrode Gold 12.00 23.95 39.95 82.95

07WC-(size) 2% Ceriated Tungsten Electrode Orange 12.00 23.95 44.00 82.95

1/16” 3/32” 1/8” 5/32”

ER4043 Aluminum 4043 Alloy $7.35 6.95 6.75 6.75

ER5356 Aluminum 5356 Alloy $5.35 4.95 4.75 4.75

ER308L-(size) Stainless Steel ER308L $6.50 6.15 5.90 5.90

ER309-(size) Stainless Steel ER309 $9.35 8.95 8.75 8.75

WE309L-(size) Stainless Steel ER309L $9.35 8.95 8.75 8.75


ER316L-(size) Stainless Steel ER316L $ 9.35 8.95 8.75 8.75

ER317L-(size) Stainless Steel ER317L $13.35 12.95 12.75 12.75



ERTI1 36” Titanium Grade Ti-1 $76.50 68.50 66.95 66.95

ERTI2 36” Titanium Grade Ti-2 $76.50 68.50 66.95 66.95

ER70S2-(size) Mild Steel ER70S2 $3.35 2.95 2.75 2.75



ER80SB2-(size) Mild Steel ER80SB2 $4.95 4.55 4.35 4.35

ER80SD2-(size) Mild Steel ER80SD2 $4.95 4.55 4.35 4.35

ER90SB3-(size) Mild Steel ER90SB3 $5.95 5.55 5.35 5.35



MIG GUNS

Choosing the right MIG gun can have a big impact on your comfort level and muscle fatigue throughout the course

of the work day. Selecting the lightest, most flexible MIG gun for the application is the best choice. In the case of

a 400-amp application, a MIG gun rated at 300 amps may suffice. As when selecting MIG gun or a handle, a good

rule of thumb is also to select the smallest and shortest power cable possible that can still meet the needs of the

application. Smaller and shorter power cables are lighter and more flexible and can, therefore, reduce operator

fatigue. They can also minimize clutter in the work space and prevent excessive coiling that may be cumbersome

for the welding operator to rectify and that could also lead to poor wire feeding. An added advantage is that smaller

and shorter cables tend to be less expensive, as well.


Please specify: L-Lincoln, M-Miller, E-Euro Connector

T200-3545-10- 200 Amp Tweco Style w/10’ cable $147.00




T300-3545-15- 300 Amp Tweco Style w/15’ cable $175.00 T300-3545-25- 300 Amp Tweco Style w/25’ cable $195.00




B200-3545-10- 200 Amp Bernard Style w/10’ cable $155.00









CMP & SUPPLY CO.


CONTACT TIPS

BERNARD


1588 Contact Tip Long 0.030” suit all models .70



1591 Contact Tip Long 1/16” suit all models .70

1592 Contact Tip Long 5/64” suit all models .70

7497 Contact Tip Short 0.023” suit all models .50




7498 Contact Tip Short Alum 3/64” suit all models .50

7491 Contact Tip Short 1/16” suit all models .50

7492 Contact Tip Short 5/64” suit all models .50

4285 Contact Tip Tapered 0.030” suit all models .70




4280 Contact Tip Tapered 1/16” suit all models .70

TWECO

11-23 Contact Tip Std Duty 0.023” suit TW1, Mini .35




11T-23 Contact Tip Tapered .023” suit TW1, Mini .35

11T-30 Contact Tip Tapered .030 suit TW1, Mini .35




14-23 Contact Tip Std Duty 0.023” suit TW2,4 .38




14-564 Contact Tip Hvy Duty 5/64” suit TW2,4 .38


14-116 Contact Tip Std Duty 1/16” suit TW2,4 .38



TWECO, Cont.


14H-30 Contact Tip Hvy Duty 0.030” suit TW2,4 .48



14AH-364 Contract Tip Hvy Duty Alum 3/64” suit TW5 .48

14H-52 Contact Tip Hvy Duty 0.052” suit TW5 .48

14H-116 Contact Tip Hvy Duty 1/16” suit TW2,4 .48

14T-30 Contact Tip Tapered 0.030” suit TW2,4 .60






15AH-364 Contact Tip Hvy DutyAlum 0.035” suit TW5 .85


15H-116 Contact Tip Hvy Duty 1/16” suit TW5 .85

15AH-116 Contact Tip Alum 1/16” suit TW5 .85

15H-564 Contact Tip Hvy Duty 5/64” suit TW5 .85

15HFC-35 Contact Tip Hvy Duty 0.035” F/C suit TW5 .85

15HFC-45 Contact Tip Hvy Duty 0.045” F/C suit TW5 .85

15HFC-116 Contact Tip Hvy Duty 1/16” F/C suit TW5 .85

15HFC-564 Contact Tip Hvy Duty 5/64” F/C suit TW5 .85

CMP & SUPPLY CO.


MIG NOZZLES

BERNARD


4391 Gas Nozzle HD Straight suit BE200, 300 $3.70

4392 Gas Nozzle HD Tapered suit BE200, 300 3.70

4491 Gas Nozzle HD Straight suit BE400, 500 4.20

4492 Gas Nozzle HD Tapered suit BE400, 500 4.20

4295 Gas Nozzle Tapered suit BE200, 300 4.20

TWECO

21-50 Gas Nozzle Std Duty 1/2” suit TW1, Mini 3.80

21-62 Gas Nozzle Std Duty 5/8” suit TW1, Mini 3.80

21-37F Nozzle Flush 3/8”

21-50F Gas Nozzle Flush 1/2" suit TW1, Mini 3.80

21-62F Gas Nozzle Flush 5/8" suit TW1, Mini 3.80

22-50 Gas Nozzle Std Duty 1/2” suit TW2 2.00

22-62 Gas Nozzle Std Duty 5/8” suit TW2 2.00

22-50SS Gas Nozzle Short Stop 1/2” suit TW2 2.00

23-50F Gas Nozzle Screw On Flush 1/2” suit TW3,4 6.50

23-62F Gas Nozzle Screw On 5/8” Flush 6.50

23-50 Gas Nozzle Screw On 1/2” suit TW3,4 5.50



Nozzles available in packs of 5.



TWECO, cont.


24A-50SS Gas Nozzle Short Stop 1/2” suit 1.95

24A-62SS Gas Nozzle Short Stop Alum 5/8” suit TW4 1.95

24A-75SS Gas Nozzle Short Stop Alum 3/4” suit TW4 1.95

24A-50 Gas Nozzle Std Duty 1/2” Suit TW4 1.95

24A-62 Gas Nozzle Std Duty 5/8” Suit TW4 1.95

24A-75 Gas Nozzle Std Duty Alum 3/4” Suit TW4 1.95

24AH-50 Gas Nozzle Hvy Duty Alum 1/2” suit TW4 3.70



24CT-37S Gas Nozzle Fixed 3/8” TW 2,3,4 3.00

24CT-50S Gas Nozzle Fixed 1/2” TW4 3.00



25CT-50 Gas Nozzle Fixed 1/2” suit TW5 3.30



CMP & SUPPLY CO.


MIG, INSULATORS & DIFFUSERS


4323R Cap Rubber suit BE 200, 300 2.20

4423R Cap Rubber suit BE400, 500 2.20

4235 Head for Long Tips BE 200,300 (5/pkg) 3.70

4335 Head for Short Tips BE200, 300 (5/pkg) 3.70

4435 Head for Short Tips BE400, 500 (5/pkg) 3.70

4635 Head for Long Tips BE 400,500 (5/pkg) 3.70

32 Insulator suit TW2 1.00

34A Insulator suit TW4 1.00

34CT Insulator Course Thread suit TW4 6.35

35CT Insulator Course Thread suit TW5 7.35

52 Gas Diffuser Std suit TW2 2.50

52FN Gas Diffuser Fixed Nozzle suit TW2 2.15

54A Gas Diffuser Std TW3,4 1.00

55 Gas Diffuser Std suit TW5

MIG, GUN LINERS

43010 Liner Assy .023-.030” 10’ suit BE200, 300 9.75





42-23-15 Conduit Assy .023” 15’ suit TW2 9.50

42-3035-15 Conduit Assy .030-.035” 15’ suit TW2 9.50





44N-3545-15 Conduit Assy Nylon.035-.045” 15’ suit TW4 13.50

44-116-15 Conduit Assy 1/16” 15’ suit TW4 9.50

44-116-25 Conduit Assy 1/16” 25’ suit TW4 13.50

All available in packs of 5.



MIG, WELDING WIRES

STEEL Mild & Low Alloy Steel

1170S6023 ER70S-6 .023-025 11 lb spool 23.95/spool

1170S6030 mig wire 70s-6 0.030 11 lb spool price per lb 1.77 lb

1170S6035 ER70S6 Mig Wire 11 lb Spool .035 1.98 lb

3370S6030 70S6-030 Mig Wire, 33 lbs Spool 1.85 lb

4470S6035 70S-6 .035x44 lb spool price per pound 1.41 lb

4470S6045 70S-6 .045x 44 lb spool price per/lb 1.48 lb

STAINLESS STEEL

Item # .030 .035 .045 1/16

ER308 5.95 5.55 5.35 5.35

ER308L 5.95 5.55 5.35 5.35

ER309 8.15 7.75 7.55 7.55

ER309L 8.15 7.75 7.55 7.55

ER310 14.55 14.15 13.95 13.95

ER312 12.00 11.55 11.35 11.35

ER316 9.00 8.55 8.35 8.35

ER316L 9.20 8.75 8.55 8.55

ER317L 12.20 11.75 11.55 11.55

All Pricing is per pound.

All Pricing is per pound.

CMP & SUPPLY CO.


MIG, WELDING WIRES, CONT.

FLUX CORED SS

FLUX CORED

MILD STEEL

ALUMINUM

Item # .035 .045 1/16

E308LT1-1/4 13.15 12.95 12.95

E309LT1-1/4 14.55 14.35 14.35

E316LT1-1/4 15.75 15.55 15.55

E317LT1-1/4 14.15 13.95 13.95

Item # .045 .052 1/16

3371T1 2.15 1.88 1.89

Item # .030 .035 1/16

ER4043-4 6.15 5.75 5.35

ER5356-4 7.75 7.35 6.95



PLASMA

HYPERTHERM

RETAINING CAPS

& SHIELDS

ITEM PRICE

020034 30.00

020043 50.00

020087 80.00

020104 12.00

020200 13.00

020930 120483 40.00

120600 22.90

120601 15.95

120827 17.95

120828 17.95

120925 10.55

120928 41.95

120929 18.35

120930 19.35

120977 23.95

220048 43.95

NOZZLES

ITEM PRICE

020035 11.75

020036 11.75

020037 11.75

020047 15.15

020084 14.35

020089 14.35

020115 1.80

020131 1.80

020197 1.80

020219 1.80

020335 14.55

020337 2.35

020340 3.35

020350 2.15

020381 1.75

020395 2.15

020466 2.15

020539 4.75

020605 5.55

120616 5.55

120023 2.35

120272 17.55

120281 4.55

120282 2.35

120304 2.55

120305 2.55

120476 5.15

120504 2.00

120515 12.35

120518 10.00

120577 2.35

120578 2.35

120606 3.15

120607 4.55

120826 3.15

120927 8.75

120929 18.35

120931 9.15

SWIRL

RINGS ITEM PRICE

020039 13.55

020040 13.55

020042 11.55

020048 14.75

020079 12.55

020101 8.95

020239 9.55

020361 9.55

020706 15.95

025028 .55

120303 5.35

120474 10.15

120576 16.15

120925 10.55

220051 14.15

ELECTRODES

020038 10.55

020082 14.35

020103 2.75

020167 6.15

020191 3.75

020193 5.75

020220 3.55

020285 11.75

020382 3.35

020414 12.95

020415 12.95

020467 46.95

120470 27.95

120473 5.75

120573 5.55

120574 5.55

120667 10.55

120926 5.55

120930 19.35

220037 5.95

CMP & SUPPLY CO.


PLASMA CONT.

ESAB

SHIELD CUPS

ITEM PRICE

19124 5.95

20747 11.55

21326 16.95

21447 20.35

33419 13.35

21616 16.35

TIPS

18820 4.15

19914 2.75

19916 2.75

19917 2.75

20426 4.35

20860 3.15

20861 3.35

21008 3.35

21328 4.15

ELECTRODES

18205 7.35

20862 5.95

33366 6.95

21150 5.75

19918 5.35

21595 7.55

THERMAL

DYNAMICS

SHIELD CUPS ITEM PRICE 84088 4.95

85526 5.15

87500 28.15

87507 32.95

87575 15.75

95500 4.95

95617 3.55

95630 3.75

95694 8.15

95712 9.35

95750 25.75

95774 25.15

95779 19.15

95780 19.15

95790 42.15

96003 18.15

96004 27.75

96016 23.55

98218 41.15

98237 65.35

98236 25.15

98239 25.15

98243 14.95

98241 29.95

98402 11.55

ELECTRODES

84259 3.75

87502 5.95

95503 7.95

95582 5.55

95619 5.55

95633 2.95

95711 5.95

95749 6.55

95754 17.75

95760 6.95

95898 5.75

96006 5.15

96078 10.55

96506 3.55

96542 10.75

98215 13.15

98402 11.55

98407 10.15

THERMAL

DYNAMICS, CONT.

TIPS

ITEM PRICE 84173 2.95

87503 3.75

87504 3.75

87505 3.75

87506 3.75

95501 2.15

95581 2.95

95618 2.35

95631 1.95

95702 2.15

95707 2.35

95708 2.35

95709 2.35

95746 4.95

95747 4.95

95748 4.95

95782 2.15

95897 3.15

96000 2.95

96001 2.95

96002 2.95

96056 7.35

96099 2.95

96120 2.95

96500 2.95

96501 2.95

97726 4.15

97728 4.15

98207 9.15

98208 7.95

98210 9.15

98208 7.95

98210 9.15

98211 8.95

98212 9.15

98227 10.15

GAS DISTRIBUTORS

83218 2.55

87508 12.95

95502 12.95

96007 4.35

96081 27.55

96507 11.55



GROUND CLAMPS

GLC200 200amp Lenco Style Copper Ground Clamp $11.00

GLC300 300amp Lenco Style Copper Ground Clamp $19.00

GCW200 200amp Lenco Style Steel Ground Clamp $4.00

GCW300 300amp Lenco Style Steel Ground Clamp $5.00

GCW200 200amp Tweco Style Copper Ground Clamp $4.00

GCW300 300amp Tweco Style Copper Ground Clamp $4.50

ELECTRODE HOLDERS

EHRAF200 Lenco Style RAF Series 200 amp Holder $10.00




EHT200 Tweco Style T Series 200 amp Holder $11.50




CABLE, CONNECTORS & LUGS

CRTP1 Tweco Style 1-MPC Male/Female $7.00



CLH1020BP Hammer On Cable Lug Fits cable 1/0-2/0 $4.01

CL1020BP Solder On Cable Lug Fits cable 1/0-2/0 $3.00

CMP & SUPPLY CO.


WELDING ELECTRODES

NICKEL ALLOYS

STAINLESS STEEL

MILD & ALLOY STEEL

ALUMINUM

Item # 3/32 1/8 5/32 3/16

NA 190 21.95 21.75 21.75 21.75

NA A 21.75 21.55 21.55 21.55

NA 182 21.35 21.15 21.15 21.15

NA 112 27.15 26.95 26.95 26.95

HAS C276 29.55 29.35 29.35 29.35

NI 55 13.55 13.35 13.35 13.35

NI 99 20.35 20.15 20.15 20.15

Item # 3/32 1/8 5/32 3/16

E308-16 5.75 5.55 5.55 5.55

E308L-16 5.95 5.75 5.75 5.75

E309-16 6.95 6.75 6.75 6.75

E310-16 7.95 7.75 7.75 7.75

E312-16 5.95 5.75 5.75 5.75

E316-16 9.55 9.35 9.35 9.35

E316L-16 8.35 8.15 8.15 8.15

E317L-16 9.55 9.35 9.35 9.35

Item # 3/32 1/8 5/32 3/16

6010 2.35 2.15 2.15 2.15

6011 2.35 2.15 2.15 2.15

6013 2.15 1.95 1.95 1.95

6022 2.15 1.95 1.95 1.95

7010-A1 2.55 2.35 2.35 2.35

7014 2.15 1.95 1.95 1.95

7018 2.27 1.99 1.95 1.95

7024 2.35 2.15 2.15 2.15

8018-B2 2.95 2.75 2.75 2.75

9018-B3 3.35 3.15 3.15 3.15

Item # 3/32 1/8 5/32 3/16

A-3 11.75 11.55 11.55 11.55



CARBON ARC GOUGING

AEC 4000-1 Profax 4000-1 gouging torch $135.00

K3 600 Amp Torch w/7’ swivel cable $125.00

CH1812 1/8x12” Copperclad Pointed Electrode 100/box .17

CH53212 5/32 x 12” Copperclad Pointed Electrode 100/box .20






Torches and Electrodes

CMP & SUPPLY CO.


Processes: GMAW, SMAW, GTAW, FCAW, & PLASMA ARC WELDING/CUTTING

Viewing Area: 98x44 mm (3.86” x 1.73”)

Standards: EN, DIN, ISO9001-200, ANSI Z87.12003, & CAN/ CSA Z94.3

ITEM DESCRIPTION PRICE

WHADF600SBLK Black 91.00

WHADF600SBLUE Blue 94.00

WHADF600SRED Red 94.00

WHADF600SSIL Silver 94.00

We carry a full line of Jackson, Huntsman, Optrel and Pearson. Please call for

more information.

ITEM DESCRIPTION PRICE

WHADF700SBLKFL Black Flame, GMAW,SMAW,GTAW,FCAW 121.00

WHADF700SREDFL Red Flame, GMAW,SMAW,GTAW,FCAW 121.00

WHADF700SUSFLG Blue w/USA Flag GMAW,SMAW,GTAW,FCAW 121.00

Auto Darkening Filter ADF – 600S & 700S Lightweight High Impact Resistant Black Shell



2x4” Flip

ITEM PRICE

WHO32L 2x4.25” Flip Front Helmet w/shade 11 lens $22.00

4x5” Fixed

ITEM PRICE

WHO35FIXED 4.5x5.25” Fixed Front Helmet w/ shade 10 lens $20.00

4x5” Lift

ITEM PRICE

WHO35L 4.5x5.25” Flip Front Helmet w/shade 10 lens $25.00

PARTS

WHH71A Headgear for Inweld 2x4 & 4x5 Helmets w/sweatband $7.00

WHADF600SHG Headgear for Inweld ADF300S &600S w/sweatband $7.00

Helmets-Welding

CMP & SUPPLY CO.


Auto Darkening Filter Replacements lenses

S-240-10 Arc One 2x4 shade 10 auto lens $82.00



X540V-1500 Arc One 4x5 auto lens for vision helmet $185.00

LENSES

We have a full line of welding lenses and hoods.

Lenses-Clear 2 x 4.25”

L2CG Glass 2x4.25” .50

L2CG20 Glass 2x4.25” x 2.0 mm .50

L2CG27 Glass 2x4.25” x 2.7mm .50

L2CLCR39 CR39 2x4.25” .60

L2CLP040 Poly 2x4.25” x0.040 .60

L2CLP060 Poly 2x4.25” x 0.060 .60

4.5 x 5.25”

L4CG Glass 4.5 x 5.25” .60

L4CLCR39 CR39 4.5x 5.25 1.40

L4CLP040 Poly 4.5x5.25 x 0.040 .90

L4CLP060 Poly 4.5x5.25 x 0.060 .90



WE CARRY A FULL LINE OF JACKSON, HUNTSMAN, AND MSA

BRANDS. PLEASE CALL FOR MORE INFORMATION.


301LOG-(color) 4 pt. Pinlock Suspension $6.50

302LOG-(color) 4 pt. Ratchet Suspension $9.00

Jackson Blockhead™ Hard Hats

20699KC2 LOG-(color) 8 pt. Ratchet suspension $13.95

Jackson Sentry III™ Hard Hats

14409KC2 LOG-(color) 6 pt. Ratchet Suspension $14.55

LINERS

16867EG 3-Layer Extreme Series 100% Poly Fleece Lining (6/case) $34.70

16850EG 2-Layer Series 100% Poly Fleece Lining (6/case) $27.00

300442JS Blue Quilted Nylon Shell, 3-Layers of thick foam ea $ 2.20

3000439JS Heavy Knit Spun Polyester Heavyweight Fleece Lining ea. $ 7.60

Available in Black, Blue, Lime, Orange, Red, Yellow & White. 4 pt. ratchet or pinlock suspensions. Meets ANSI Z89.1 Type 1, Class E Standards

Available in Blue, Green, Orange, Hi-Vis Orange, Red, Yellow & White. 8 pt. Ratchet suspension. Meets ANSI Z89.1 Type 1, Class E Standards.

Available in Blue, Green, Orange, Hi-Vis Orange, Red, Yellow & White. 6 pt. Ratchet suspension. Meets ANSI Z89.1 Type 1, Class E Standards. Lightweight, molded from High

Density Polyethylene (HDPE)- only weighs 12.5 oz.

CMP & SUPPLY CO.


SAFETY GLASSES Prices based on lens and frame colors. We have many colors to choose from. Please call for more

information.

Part # Product/Description Price From:

NEMESIS EYEWEAR Nemesis™Safety Eyewear $2.41 - 5.12

SW MAGNUM 3G

EYEWE R Smith & Wesson® Magnum 3G™ Safety Eyewear $4.03 - $8.26

HELLRAISER EYE HellRaiser™ Safety Eyewear $3.03 - $5.87

SW EYEWEAR Smith & Wesson® Elite™ Safety Eyewear $4.20 - $4.82

ELEMENT EYEWEAR Element™ Safety Eyewear $0.92 - $1.46

OTG EYEWEAR OTG™ (Over The Glass) Safety Eyewear $3.58

301170JS Smith & Wesson® Viewmaster™ Safety Eyewear $28.67

NEMEIS VL EYEWEAR Nemesis VL™ Safety Eyewear 3.20 - $6.03

SW EQUALIZER

EYEWEAR Smith & Wesson® Equalizer™ Safety Eyewear $3.65 - $.70

NEMESIS RX EYEWEAR Nemesis RX™ Safety Eyewear $5.76

EXPO EYEWEAR Expo™ Safety Eyewear $0.78

UNISPEC EYEWEAR Unispec II™ Safety Eyewear $.50 -$3.70


http://www.logisticssupply.com/task=itemtype&type=Eyewear/HELLRAISER%20EYEWEAR

http://www.logisticssupply.com/task=itemtype&type=Eyewear/SW%20ELITE%20EYEWEAR

http://www.logisticssupply.com/task=itemtype&type=Eyewear/ELEMENT%20EYEWEAR

http://www.logisticssupply.com/task=itemtype&type=Eyewear/3011704JS

http://www.logisticssupply.com/task=itemtype&type=Eyewear/NEMESIS%20RX%20EYEWEAR


Prices based on lens and frame colors. Many colors to choose from. Please call for more information.

Part # Product/Description Price From:

BEARKAT Bearkat® Safety Glasses $1.37- $1.97

KLONDIKE

BLACK Klondike® Eyewear with Black Frame $2.98 - $3.60

CHECKLITE Checklite® Safety Glasses $1.15 - $2.15

STORM

BLACK Storm® Safety Glasses with Black Frame $3.75 - $4.85

STRATOS

BLACK Stratos® Eyewear with Black Frame $0.85 - $1.68

CK2 SMOKE CK2® Eyewear with Smoke Temple/Clear Nosepiece $2.08 - $3.74

CHECKMATE Checkmate® Safety Glasses $1.35 - $2.85

TOMAHAWK

BLACK Tomahawk® Eyewear with Black Frame $1.62 - $3.29

TOMAHAWK

USA Tomahawk® Eyewear with Red/White/Blue Frame $1.92 - $2.80

CK2 CK2® Eyewear, Smoke Temple w/Yellow Accents $2.08- $3.75

99940C Excalibur® Safety Glasses with Red Frame $2.25

DESPERADO

BLACK

Desperado™ Safety Glasses with Black Nylon Frame/Clear

Nosepiece $3.50 - $5.45

YUKON XL Yukon® XL Eyewear $1.50 - $2.66

http://www.logisticssupply.com/task=itemtype&type=Eyewear/CHECKLITE

CMP & SUPPLY CO.


EYE SAFETY


320004 LOG Eye Wash Station, Dual 16 oz Bottles $40.55

45416BYLOG Green on White lettering holds two 32oz. bottles $60.00

H703FLOG 1/2 oz. bottles 12/box $32.50

7501LFA Portable gravity operated. 9 gal. capacity. $214.00

EYE GLASS CORDS

210C Crews Economy Black, 24” . 79

214C Breakaway Black 1.95

GOGGLES

2220C Perforated Rubber Strap, Clear Lens 1.70

2230RC Chemical Splash Goggle w/Indirect Vent 2.25

2310 AFC LOG RX 1000 Goggles w/Clear Anti-Fog Lens 6.04

28550C Crews Welding Goggle Green Lens 6.11

VISORS


10017934MSA Polycarbonate Visor, Clear (Flat) 8" x 15.5" x .040" 3.75

10109109MSA Propionate, Dark Green Basic Z87.1 8”x15.5”x.060 4.18

181640C LOG 8x15 ½ clear face shield .040 thickness 1.98

HEAD GEAR

BG1 ARC Ratchet headgear for face shield comes with clear shield 9.99



GLOVES

WORK the following gloves come in sizes S-XL special sizing available call for pricing

ITEM# DESCRIPTION PRICE/DOZEN

528 Economy Shoulder-split leather palm 2 1/2" starched safety cuff $18.00dz

558 Select Shoulder, Economy Leather, 2 1/2" Plasticized Cuff LG 20.38dz

450DP Double Leather Palm, 2 1/2" Safety Cuff L-2XL DZ 21.60dz

5558P Fleece Lined Leather Palm Glove 3.87 pr

DRIVERS

993K-size Split Leather Cow driver, Straight Thumb sizes L-XL 5.40 pr

999KT 100 gram 3M Thinsulate lining 8.50 pr

WELDING

9041-size Premium select side leather Kevlar sewn wing thumb 6.00 pr

MIG & TIG WELDING

6010 Mig Glove, 4" cuff L-XL 8.67pr

6140-size Premium Kidskin Tig glove Kevlar® sewn 2” cuff 9.00pr

INSULATED

1555 Pigskin, Thinsulate® Lined Gloves w/Knit Wrist Lg. only 6.19pr

HV05555 Hi-Vis Premium Grain Pigskin w/3M scotch brite fabric Insulated 8.58pr

Industry Applications: Welding and heat applications, plus all general purpose applications requiring heat, flame

or spark protection. Many more styles to choose from. Please call for more information.

CMP & SUPPLY CO.


STRING & COATED

ITEM# DESCRIPTION PRICE/DOZEN

K710SBW Cotton String Knit, natural Large 7 gauge 7.60 dz

K708SKHW String Knits w/PVC dots. Abrasion Resistance 9.95 dz

DISPOSABLE/EXAM GLOVES

2905-size 3 mil Powder free textured gloves 100/bx 6.80

2550-size 14 mil Powder free Latex gloves 50/box high risk EMT grade 12.99

EARMUFFS

1010421HW LOG Mach™ 1 Earmuffs 9.20

1011602SN 25NRR Cap-Mounted T2H Noise Blocking Earmuff 13.63

FOAM PLUGS

MAX1SN Uncorded NRR29 (200/box) 26.55

MAX30SN Corded NRR24 Conic-Fit (100/box) 24.38

QB2HYG® Banded ear plugs for environments that have intermittent noise.

NRR 25 4.34 ea

This is a partial listing of earmuffs. We offer a full line to suit your needs. Please call us for more options.



RESPIRATORS


14110388 SAF-T-FIT® Plus Disposable Particulate Med/Lg. 20/box $15.95

14110444HW N95 Non-Valved (Style #NBW95) 20/box $11.00

1740GN N95 Respirator w/o Exhalation Valve Adjustable metal nose band $12.00

10/box

RESPIRATOR CARTRIDGES

Full line of cartridges available. Please call us for more information.

SIGNS

We supply all custom made safety and warning signs. Call for more information.

Definitions:

N95 Particulate Filter (95% filter efficiency level) – Effective against particulate aerosols free of oil; time use

restrictions may apply.

R95 Particulate Filter (95% filter efficiency level)- Effective against all particulate aerosols; time use restrictions

may apply.

P100 Particulate Filter (99.97% filter efficiency level)- Effective against all particulate aerosols.

CMP & SUPPLY CO.


FIRE AND DETECTION

466142K Kidde 2 1/2 lb ABC Disposable Extinguisher w/Nylon Strap Bracket $26.00

466425K Kidde 5 lb ABC Extinguisher FC340M-VB w/Steel Bracket & Strap $48.00

466204K Kidde 10 lb ABC Pro Line MP Extinguisher w/Wall Hook $57.00

21007867B Badger® Advantage® 10 lb ABC Extinguisher w/Wall Hook $79.00

466206K Kidde 20 lb ABC Pro Line MP Extinguisher w/Wall Hook $106.43

DETECTION FIRE AND CARBON MONOXIDE

0914E Micro Ionization Smoke Alarm (DC) $8.81

I4618 i4618 AC/DC Ionization Wire-In Smoke Alarm w/Battery Backup $21.61

21006406LEG CO Alarm, AC Wire-In w/Battery Backup $38.36

HD135F Heat Detector with Thermal Sensor (AC/DC) $29.92

47173BY "FIRE EXTINGUISHER" sign 8"H x 8 1/2"W x 3 1/4"D $19.48

FXWMANMC “FIRE EXTINGUISHER" Arrow Aluminum Sign $10.75



FIRST AID

223GF 25-Person, 106-Piece Kit w/Gasket (Plastic) $26.50

225ANF 50-Person, 195-Piece Kit w/Dividers (Plastic) $55.00

CLOTHING

V200RRC 3/4" Lime Prismatic Mesh Fabric $4.50

V201RC General Purpose Orange Safety Vest no stripes $4.50

V201RRC Class 2 Luminator, Poly Orange Safety Vest w/Silver Stripes $12.48

39030(size) Green welding jacket 30” Snap sleeves and front (Med-XL) $25.21

38100 Red-Ram Leather Cape with Snap Bib (XL-2XL) $50.00

39120 Fire Retardant Fabric Welding Bib for Cape $22.00

RAIN GEAR

2403LRC Classic .35mm PVC/Poly, 49" Yellow Raincoat w/Attached Hood Lg. $10.50

RW353 Choice 3 Piece PVC/Polyester Rain-suit sizes Med-4XL $8.01

BYR10011RC Rubber Slush Boot 17” Yellow, Sizes 10-16 $23.50

CMP & SUPPLY CO.


FALL PROTECTION

ULTRA-SAFE

96305N Economy Full Body Harness single D-ring center back only. Sm-XLg. $38.00

96307 Full Body Harness, retrieval type. D-ring center back and on each shoulder. $58.00

96305 Full Body Harness, 3 point positioning type. D-ring ctr.back & on each hip. $55.00

96396 Full Body harness, Iron worker type $89.00

LANYARDS

US96502 Nylon web lanyard with double locking snaps on each end. $33.00

US96406 1/2” x 6’ Nylon rope lanyard $40.00

US97514 4’ Shock Lanyard $43.00

US96516 1/2”x 6 shock absorbing lanyard $50.00

FALL PROTECTION HARDWARE


96594 Small Carabiner $25.00

96598 Large Carabiner $31.00

96596 Small rebar hook $23.50

96597 Large rebar hook $30.00

The fall restraint and fall arrest products below meet or exceed ANSI Z359.1 and OSHA regulations.



ULTRA-SAFE

9659all

RETRACTABLE LANYARDS

Web Retractables, w/ swivel tops, Aluminum Carabiners and Aluminum Hooks.


US-HPS8 1” webbing, Length-8’ Retractable w/swivel top and carabiner $140.00



Cable Retractables w/swivel tops, Carabiners and Steel Load Indicator Hooks.

US-HN10 3/16”cable, Length-10’ $155.00




CMP & SUPPLY CO.


Tape

ITEM# DESCRIPTION PRICE EA. ROLL

M183 Industrial Grade Masking Tape 1”x60’ 36/case $1.80

M801 ¾”x60’ General Purpose Electrical Tape $1.59

GP2280 General Purpose DUCT tape 2”x60’ 24/cs $4.66

M234 Barricade Tape, Danger 3”x1000’ 8/cs $8.23

M224 Barricade Tape, Caution 3”x1000’ 12/cs Yellow $8.23

Batteries

ENE EN91 AA Energizer Batteries 24/pk $14.64

ENE EN92 AAA Energizer Batteries 24/pk $15.50 ENE EN95 D Energizer batteries 1 doz. $18.00

Lighting

E250YEN Economy Industrial 2D Flashlight $4.50

1151EN Energizer® Industrial® 2AA Heavy-Duty Flashlight $5.00

500QTZ 500 watt Quartz with Floor Stand. $40.00

500QTZSTD 500 watt Quartz with tripod Stand $55.00



ATA PNEUMATIC POWER TOOLS

Power Tools


GAL-1340A Extended Right Angle Wheel Grinder 13,500 RPM Call for pricing

GAL-1340A-C Extended Right Angle Collet Grinder 13,500 RPM

G-1340A ¼” Lightweight Aluminum Body Die Grinder 25,000 RPM

GE-1340A-C 1/4” Extended heavy-duty Die Grinder 25,000 RPM

PAS-361 Air Marking Pen writes on materials up to RC-64

SV27LR Anti-Vibration Die Grinder 1.00Hp 25000RMP 6mm Collet

SDX37LR Extended Body Straight Grinder 37,000RPM 6mm Collet

RA20LR Small Right Angle Die Grinder 20,000 RPM

RA14-125RA4 Right Angle Grinder 12,000RPM 125mm Disc Type 27, 41, 42

CMP & SUPPLY CO.


Chain Hoists

VCH12x10 ½ ton x 10’ Chain Hoist $135.00



VCH1x10 1 ton x 10’ Chain Hoist $155.00



VCH112x10 1-1/2 ton x10’ Chain Hoist $200.00

VCH112x15 1-1/2 ton x 15’ Chain Hoist $225.00

VCH112x20 1-1/2 ton x 20’ Chain Hoist $259.00

VCH2x10 2 Ton x 10’ Chain Hoist $248.00






Lever Hoists

VLH12x5 ½ Ton x 5’ Lever Hoist $137.00

VLH12x10 ½ Ton x 10’ Lever Hoist $149.00

VLH34x5 ¾ Ton x 5’ Lever Hoist $198.00




VLH112x5 1-1/2 Ton x 5’ Lever Hoist $252.00


VLX112x15 1-1/2 Ton x 15’ Lever Hoist $291.00


VLH3x5 3 Ton x 5’ Lever Hoist $385.00




Push Trolley

VPT1 1 Ton Trolley $100.00



Manual Chain Hoists are available to 20 ton rating. Auto Brake, Bolt on Latches, Heat Treated Hooks.



Beam Clamp VBC1 1 Ton Adjustable Clamp $75.00

VBC2 2 Ton Adjustable Clamp $80.00

VBC3 3 Ton Adjustable Clamp $129.00

Levels

330-24 24” Polycast Level $5.75

540-24 24” Aluminum Level $10.40

EM81.24 24” Heavy Duty Magnetic Aluminum I-Beam $18.50

540-48 48” Aluminum Level $16.00

EM81.48 48” Heavy Duty Magnetic Aluminum I-Beam $33.00

Squares

EM0100 8”x12” Steel carpenter Square $4.50

1794469 12” Combination Square $8.90

Tape Measures

6926 25’x1” Yellow Case with Slide Lock $5.25

6936 30’x1” Yellow Case with Slide Lock $6.50

7536 35”x1” Yellow Case with Slide Lock $8.00

6100 100’x ½” ABS Closed Case Tape-Fiberglass Blade $18.00

CMP & SUPPLY CO.


Let our experience and service work for you.

Tel: 207-487-3681 Fax: 207-487-3684

Website: www.cmpandsupply.com


http://www.cmpandsupply.com/

Documents

CMP & SUPPLY CO