2018 Winter FlyerPricing valid from January 1 to March 31, 2018

Canadians Supporting Canadians

Distributed by:

The Staff & Management ofSowa Tool & Machine extend our

warmest wishes to All for aSafe and Prosperous 2018

• With 2 dial gauges (1" for vertical and 2" table travel)• Large 12" x 3" t-slot stage with 6" horizontal and2-1/2" vertical travel

• 12" diameter protractor screen• Rotatable screen with fine adjustment• Selectable high and low intensity profile illuminationswitch

• Vernier resolution of 5 minutes• Overlay clips• Digital indicator and V-Blocks are not included

12” Optical Comparator

Vertical Profile Projector

Code No.: 7641010

$9,382.00$18,213.10 Value

$2,914.00Code No.: 7641090

$4,206.20 Value

• Direct imaging• Stage size: 340 x 152mm• Glass table: 196 x 96mm• Projector Screen: 12”, usable range >300mm• Objective lens: 10X• Dimensions: 770 x 550 x 1100mm• 130kgs

• Designed to provide excellent quality images with accurate magnification

• The error of the contour measuring is under 0.08% deviation

• Convenient foot switch transfers the coordinate data to the data processing system

LIMITED QUA

NTITIES

1-800-265-8221 www.sowatool.com2

Range Accuracy Code No. List $ SALE $0-6”/0-150mm ±.001”/±0.02mm 7307065 107.40 57.500-8”/0-200mm ±.0015”/±0.03mm 7307085 155.00 90.800-12”/0-300mm ±.0015”/±0.03mm 7307125 217.10 124.80

• Resolution .0005" / 0.01mm• Extra large LCD readout• The origin position is retained through the on/off cycle• Inch/Metric conversion

Range Accuracy Code No. List $ SALE $0-1”/0-25mm ±.0001”/.002mm 7105015 217.70 130.40

• ResolutionDigital: .00005"/ 0.001mmScale: .0001"

• Dual Ratchet combines both the Ratchet Stop and Friction Thimble

• Protection level IP65• Upon switch-on the display will read the actual absolute measuring position

• Automatic On/Off to maximize battery life• Inch/Metric conversion• Absolute or incremental measuring modes• Carbide tipped measuring faces

Dial Range Accuracy Code No. List $ SALE $ 0-.15” ±.0002” 7469008 291.40 161.35

• Graduation .0005" / 0.01mm• Provides a simplified method of centering a work piece or fixture on horizontalfor vertical machines, internal or external diameters. Face of indicator remainsstationary in any desired position while the machine spindle rotates, leaving theoperator with both hands free to accurately position the machine table

• Shank Dia.: Ø3⁄8" / Ø10mm• Operating speed not to exceed 800rpm• RangeInternal: 5⁄32" - 12"/ 4 - 300mmExternal: Up to 12"/ 300mm

Granite Surface PlateCompressive Strength 7329 lbs. / in2Water Absorptivity 0.13%• 24” x 36” x 4” No Ledge• Grade B - Tool Room• 475 lbsCode# 255-140Reg. List $611.10

18” Height Gauge• Graduation: Inch: .001”/Metric: 0.01mm• Dial & digit counter reading• Carbide tipped scriber• Range: 0-18”• Accuracy: ±.002”Code# 7623181Reg. List $728.40

Code No.: 500-124

$250.75 $762.00

Code No.: 500-845

$937.65

Noga DG1003 Magnetic Base• 11” reach• Noga central locking mechanism andNoga designed spring loaded bearing

• Powerful (80kgf) On/Off magnetic baseCode# 165-350Reg. List $212.80

Asimeto Dial Test Indicator• Graduation: .0005”• Range: .03”• Dial Reading: 0-15-0• Accuracy: ±.0005”• Horizontal style• Jeweled bearings• Easy to read yellow face• 3/8” and 8mm dovetail stems includedCode# 7501733Reg. List $119.60

$332.40 Value$1,339.50 Value

Made in Israel

Noga Magnetic Base & Dial Test Indicator Set

Digital Calipers IP65 Digital Outside Micrometer w/ SPC Output

PRECISION TOOLS

Centering Indicator

18” Height Gauge & Surface Plate Combo

31-800-265-8221 www.sowatool.com

Features:• Covered rack• Accurate to .001 per 6"• Made of Stainless Steel• Clamp for repetitive setting• Deluxe case• .100" Revolution

Range Resolution Code No. SALE $ 0-12 .001 200-586 97.93

• Unit will sound at the same timewhen the red lamp lights up

• Accuracy: within 0.005 mm

Model Shank Dia. Point Dia. Type Code No. SALE $VPS-20B 20mm 10mm UM-5# 337-960 134.89VPS-3/4B 3/4” 10mm UM-5# 337-962 141.89

• Matched pairs• Made of high grade steel alloy• Hardened and ground• Tolerance ± 0.0003"

Model Dimensions No. per Pair Code No. SALE $ DK 32-045 3/16 x 1 x 6, 3/16 x 1-1/4 x 6, 230-850 70.25

3/16 x 1-1/2 x 6, 3/16 x 1-3/4 x 6 DK 32-050 1/2 x 1 x 6, 1/2 x 1-1/4 x 6, 230-855 78.50

1/2 x 1-1/2 x 6, 1/2 x 1-3/4 x 6 DK 32-064 1/4 x 3/4 x 6, 1/4 x 7/8 x 6, 1/4 x 1 x 6, 230-857 128.90

1/4 x 1-1/8 x 6, 1/4 x 1-3/8 x 6, 1/4 x 1-1/2 x 6,1/4 x 1-5/8 x 6, 1/4 x 1-3/4 x 6

DK 32-073 1/2 x 7/8 x 6, 1/2 x 1 x 6, 1/2 x 1-1/8 x 6, 230-860 124.901/2 x 1-1/4 x 6, 1/2 x 1-3/8 x 6, 1/2 x 1-5/8 x 6,1/2 x 1-3/4 x 6

• Base and scriber hardened• Bottom grooved for cylindrical work• Front recessed for depressing spindle below base level• Has fine adjustment• Base has 2 retractable gauge pins to set againstedge of a surface plate

Description. Code No. SALE $4" and 7" spindles (1 of each) 200-840 31.43

9" and 12" spindles (1 of each) 200-845 27.37

12” Dial Caliper

Touch Point Sensor (With Beeper)

Bevel Edge Square

Precision Parallel Sets

Steel Square

• Accuracy Class H• Hardened steel squares• Accurate right angles both inside and outside• Blades are beveled on both edges of each side• Made from a single piece of fully seasoned tool steel• Beams and blades are ground and accurately lappedfor straightness and parallelism

Blade Size (in.) Beam Code No. SALE $

7-7/8 5 230-360 37.00

Description Code No. SALE $STM Pen Scriber c/w carbide point 201-060 4.27Replacement carbide point 201-065 1.47

Inch Metric Size Size Squareness Style Code No. SALE $General Type 6” x 4” 150 x 100mm 00 Bevel 7639240 46.30

Features:• Made of precision groundhardened Stainless Steel

Surface Gauges

Scribers With Magnet

Outside Micrometer Set

• Ratchet and lock nut• Complete with standards (2" and up)• Carbide faces• Fitted wood case• Range: 0-3” • Graduation: .0001”

Code No.: 200-578

$94.00

PRECISION TOOLS

1-800-265-8221 www.sowatool.com4

Features:• For easily and quickly cleaning spindle holes.• Plastic body, the taper wiper is made of special cotton materialtherefore not damaging the spindle.

• The BT & DIN tapers are the same.

Model Taper Total Length Code No. SALE $ VTW-40 #40 159mm 326-215 29.44 VTW-50 #50 265mm 326-220 42.88

1” Extended Die Grinder - TP-1102H 1/4” 90º Die Grinder Kit (with Throttle Lever)

Spindle Taper Wipers

U/N Work Stopper - Toothed

Air Micro Die Grinder

Specifications• Air Inlet (N.P.T.): 1/4”• Air Consumption (Loading): 13 cfm• Exhaust System: Rear• Aluminum Alloy Housing

Air NetHorse Collet Pressure O.A.L. WeightPower RPM Size (psi) (in.) (lb) Code No. SALE $ 0.3 28,000 1/4”(6mm) 90 7-1/2 1.07 174-040 127.02

Description Code No. SALE $1/4" 90° die grinder kit 174-006 109.13

Contains:• 1 pc. TP-1014 Grinder• 1 pc. 1/8" (3 mm) collet• 1 pc. 1/4" (6 mm) collet• 2 pcs. spanners• 5 pcs. 1/4" (6 mm) shank grinding• 5 pcs. 1/8" (3 mm) shank grinding• 25,000 RPM

Description Code No. SALE $ 1/8" die grinder kit 174-002 154.91

Contains:• 1 pc. TP-501-1 Grinder• 1 pc. 3 mm collet• 10 pcs. 1/8" (3 mm) grinding stones• 2 pcs. spanners• 1 pc. blow case• 56,000 RPM

VHL-400L

400 Series

500 Series

VHL-500L

Features:• Water proof lighting head with reinforcedglass resists large temperature fluctuations of cutting oil.

• 110 voltage

T-Slot Stop Pin Arm Model Size Length Height Length Code No. SALE $VWS-125 16mm 160mm 200mm 132mm 326-445 218.46

• Locking lever can be rotated a full 360º

• Arm made of anodized aluminum

• Steel hinge pins• Slip adjustment of the stop pinbefore it is locked into placeArm Length Base Width Weight

Model No. (mm) (mm) (kgs.) Code No. SALE $ VHL-400L 400 x 400 79 3.8 326-335 197.10 VHL-400S - 60 2.8 326-345 153.83 VHL-500L 400 x 400 79 4 326-350 197.10 VHL-500M 220 x 220 79 3.8 326-355 197.10

Granite Surface Plates

Ship Size Thickness Weight (±) Code No. SALE $ Grade B-Tool Room- No Ledge

18” x 24” 4” 189 lb .00015” 255-110 280.42Grade A-Inspection

18”x 24” 3” 145 lb .000075” 255-135 202.93

These plates are made of the highest quality – True Black – Fine Grained – Non-porous – Jewel Hardness – Granite available to give years of longlasting service.

• An exclusive formulation that isextremely effective for the cleaningand care of granite surface plates• Works quickly and effectively,leaves no residue on the granite.

Description Code No. SALE $ Pint Spray Bottle 7607520 9.78 Gallon 7607550 34.09

Surface Plate Cleaner

SHOP SUPPLIES

Water-Proof Halogen Lamps

51-800-265-8221 www.sowatool.com

Parts Cabinets

• Steel plate covered with Zinc.• Drawer material: GPS

VA6-212H

Model Width Depth Height No. (mm) (mm) (mm) Drawers Code No. SALE $ VA7-324P 440 222 642 24 326-538 339.15

TR100 EDM Broken Tap Remover

Flexible Magnetic Pick-Up Tool• 21” in length• 12 lb capacity

Model Code No. SALE $ VCC-20 230-640 31.64

Model Length Code No. SALE $ SP2500 400mm 165-488 27.63 SP2550 600mm 165-490 31.28

For removing chips and clean the chip trays on your machines.Black finished steel hooks.The Chip Hooks include a plastic protective guard.NogaGrip Handle designed for maximum comfort in your hand.

Chip Collector with Flexible Arm

“G” Clamps

Chip Hooks - SP2500 & SP2550

Clamp Throat Load Model Capacity Depth Capacity Code No. SALE $ GCL/13D/100 4” 2-11/32” 1200lb 231-442 19.45 GCL/13D/150 6” 3” 1400lb 231-443 24.70 GCL/13D/200 8” 3-1/8” 1700lb 231-444 31.30 GCL/13D/250 10” 3-1/2” 2200lb 231-445 43.75

• SG iron with a tensile strength over 60,000 psi• Powder coated finish• Swiveling pad• Handle designed to bend before the frame canbe overstressed

• Light, small, portable, compact design• High speed & high efficiency• Simple operation allows easy removalof broken tap

• Dielectric:Uses ordinary tap water as the dielectricmedium

• Electrode:Uses any brass bar as electrode

• ESA Approved

Code No.: 901-176

CNC Tool Trolleys

Inserts Taper Includes per Tray Code No. SALE $ 40 4 trays hold 28 inserts 7 326-985 600.95 50 4 trays hold 20 inserts 5 326-995 600.95

Complete Tool Trolley with 4Tool Trays and Inserts.• Trays bolt in• (w)1002mm x (D)650mmx (H)830mm• Weight: 51kgs

Call Today For Special Net Pricing

LIMITED QUA

NTITIES The Quick Solution To A Broken Tap

Fast, low cost, high performance

ASK FOR A DEMONSTRATION

SHOP SUPPLIES

1-800-265-8221 www.sowatool.com6

CUTTING TOOLS

1” 2”Depth Depth

Size Code No. SALE $ Code No. SALE $ 7/16 138-000 41.34 138-054 57.60 1/2 138-002 43.68 138-056 59.82 9/16 138-004 43.68 138-058 59.82 5/8 138-006 43.68 138-060 59.82 11/16 138-008 43.68 138-062 59.82 3/4 138-010 46.38 138-064 64.56 13/16 138-012 51.18 138-066 68.76 7/8 138-014 52.02 138-068 77.22 15/16 138-016 55.14 138-070 82.02 1 138-018 58.38 138-072 87.301-1/16 138-020 61.80 138-074 92.101-1/8 138-022 67.44 138-076 92.641-3/16 138-024 70.20 138-078 96.001-1/4 138-026 71.64 138-080 101.041-5/16 138-028 78.66 138-082 107.941-3/8 138-030 87.06 138-084 115.921-7/16 138-032 95.40 138-086 126.301-1/2 138-034 103.86 138-088 131.821-9/16 138-036 109.38 138-090 141.061-5/8 138-038 112.26 138-092 148.621-11/16 138-040 126.30 138-094 165.541-3/4 138-042 129.06 138-096 168.241-13/16 138-044 145.92 138-098 182.341-7/8 138-046 145.92 138-100 185.101-15/16 138-048 151.44 138-102 196.26

2 138-050 162.60 138-104 201.902-1/16 138-052 189.24 138-106 229.86

• Eliminate multi-step drilling• Lower cost per hole• Better finishing• More accurate, cleaner holes.• Longer tool life• 3/4” shank dia. with two flats• Cutters are interchangeable with other standard hole cutting systems.

HSS Annular Cutters - Inch 5pc Nahanni Variable Helix Carbide End Mill Set

Fast delivery on non stock items.

Made in the UK

Coolant through

Cutting Bore No. of Kit Model No. Dia. (ØD) Dia.(Ød) ØD2 Ød2 a b E F Insert Inserts Code No. SALE $ HFPC 13250R-3 (148-638) 2.500 .750 1.772 .630 .321 .221 .778 1.969 WDKT 130520 ZDSR-MH PM10C (148-653) 10 149-200 295.60 HFPC 13300R-4 (148-640) 3.000 1.000 2.205 .827 .384 .248 .985 2.756 WDKT 130520 ZDSR-MH PM10C (148-653) 10 149-201 391.64 HFPC 15400R-4 (148-767) 4.000 1.25 3.780 1.024 .510 .319 .866 2.000 WDKT 150625 ZDSR-MH PM10C (149-108) 10 149-203 552.48 HFPC 15600R-7 (148-770) 6.000 2.00 3.937 2.835 .758 .433 1.181 2.500 WDKT 150625 ZDSR-MH PM10C (149-108) 10 149-204 713.48

Features:Powerful & economic milling tool with double clamping and 3 corner-use insert.

• Revolutionary design of the cutter and the special cutting edgeof the insert make superb feed rate possible when compared with conventional tools. (Max. fz=0.138ipt)

• Low-cutting-resistance chip breaker achieves excellent cuttingperformance and longer tool life.

• HFP can cover various applications due to HFP insert sizes08,10,13 and 15 line up.

Made in South Korea

HFPC High Feed Face Mill Kits

153-005HPROMO CODE:

List: $297.30

Set Includes:

• 4 Flute• Small corner radius for added strength andsmoother cutting action

• AlTiN coated for improved tool life andincreased production output

* WITH PURCHASE OF SET

$150.00NET

FREE

Ball Cap

Cutting With Dia. Radius (in.) Code No. List $ 3/16 153-002 28.80 1/4 153-006 39.50 5/16 153-012 55.00 3/8 153-018 62.10 1/2 153-027 111.90

Promo Prices While Quantities Last

SAVE

60%

71-800-265-8221 www.sowatool.com

Pieces Shank Size per Set Code No. SALE $ 3⁄4 12 140-950 82.28

These bars are made of extra heavy construction ensuring that more steel is behind the cutting facefor chatter-free and heavier cuts.• Extra heavy construction - 100% longer tool life• All shanks ground to +.0" - .0010"• Designed so that the same bar can bore flatbottomed holes or face

Pieces Description Per Set Code No. SALE $ 1/16” - 1/2” x 64ths Fractional Set 29 127-050 126.84

A stronger self repairing coating leading to longertool life compared to TiN coating. TiAlN Tip also allows increased speeds and feeds.

HSS 30ºTiAlN TipJOBBERSLENGTH118º

Split Point

Carbide Tipped Boring Bar Set - C6 HSS TiAlN Tip Jobber Length Drill Set

$669.00

$68.50

Code No. 500-747Reg List $1,013.90

215pc TiAlN TIP DRILL SETWITH DISPLAY CASE

• Labeled for inch drills• 1/16” - 1/2” by 64ths• Metal construction• Lockable

Made in South Africa

These Premium HSS drills can be used in a variety of applications.Their surface treatment increases abrasion resistance, which reduces the amount of chip welding and improves chip flow.• A stronger self repairing coating leading to longer tool life compared to TiN coating

• 50% more holes drilled compared to TiN tip, 200% more holes compared to bright finish

• 118º split point

Complete speeds and feeds availableAsk for your copy of theTiAlN Tip Drill Brochure (STT216C)or download it fromwww.sowatool.com

HSS TiAlN TIP JOBBER DRILLS

Flute Overall Size Decimal Length Length (in.) Equivalent (in.) (in.) Code No. SALE $

1/16 .0625 13/16 1-3/4 127-001 0.77 5/64 .0781 1” 1-15/16 127-002 0.77 3/32 .0938 1-3/16 2-1/4 127-003 0.84 7/64 .1094 1-5/16 2-7/16 127-004 1.19 1/8 .1250 1-7/16 2-9/16 127-005 1.26 9/64 .1406 1-9/16 2-13/16 127-006 1.40 5/32 .1562 1-3/4 3” 127-007 1.47 11/64 .1719 1-7/8 3-3/16 127-008 1.54 3/16 .1875 2-1/16 3-7/16 127-009 1.61 13/64 .2031 2-1/16 3-7/16 127-010 1.89 7/32 .2188 2-1/4 3-11/16 127-011 1.96 15/64 .2344 2-1/4 3-11/16 127-012 2.31 1/4 .2500 2-1/2 4” 127-013 2.38 17/64 .2656 2-3/4 4-5/16 127-014 2.66 9/32 .2812 2-3/4 4-5/16 127-015 2.87 19/64 .2969 3” 4-5/8 127-016 3.29 5/16 .3125 3” 4-5/8 127-017 3.43 21/64 .3281 3” 4-5/8 127-018 3.85 11/32 .3438 3-1/4 4-15/16 127-019 4.34 23/64 .3594 3-1/4 4-15/16 127-020 4.69 3/8 .3750 3-7/16 5-1/4 127-021 4.76 25/64 .3906 3-7/16 5-1/4 127-022 5.39 13/32 .4062 3-7/16 5-1/4 127-023 5.67 27/64 .4219 3-3/4 5-5/8 127-024 6.16 7/16 .4375 3-3/4 5-5/8 127-025 6.65 29/64 .4531 3-3/4 5-5/8 127-026 7.28 15/32 .4688 4” 6” 127-027 7.63 31/64 .4844 4” 6” 127-028 8.19 1/2 .5000 4” 6” 127-029 8.47

Letter & W

ire Gauge sizes also available from stock!

Empty drill display also available

Code No. 113-843Reg List $89.60

Made in South Africa

50% more holes drilled compared to TiN tip,200% more holes compared to bright finish

215pc Set includes:1/16” - 1/2” x 64th in the following quantities

• 10 pcs -1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”,5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”

• 5 pcs - 9/32”, 19/64”, 5/16”, 21/64”, 11/32”,23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”

CUTTING TOOLS

• High Speed Steel

5pc Chatterfree HSS Countersink Set

Dowel Pin Reamers HSS

Flute Flute Overall Dia. Length Length (in.) (in.) (in.) Code No. SALE $ .124 7/8 3-1/2 111-400 16.80 .126 7/8 3-1/2 111-402 16.80 .1865 1-1/8 4-1/2 111-404 21.38 .1885 1-1/8 4-1/2 111-406 21.38 .249 1-1/2 6 111-408 23.33 .251 1-1/2 6 111-410 23.33 .3115 1-1/2 6 111-412 27.45 .3135 1-1/2 6 111-414 27.45 .374 1-3/4 7 111-416 29.55 .376 1-3/4 7 111-418 29.55 .4365 1-3/4 7 111-420 33.38 .4385 1-3/4 7 111-422 33.38 .499 2 8 111-424 36.23 .501 2 8 111-426 36.23

• Straight flute

Series Diameter TIN TIALN Min. to Inch Decimal Coated Coated Max Metric (in.) Code No. SALE $ Code No. SALE $

13mm .5118 - - 162-726 37.1333/64” .5156 162-018 31.13 162-198 37.1317/32” .5313 162-020 31.13 162-200 37.1313.50mm .5315 162-019 31.13 - -35/64” .5469 162-021 31.13 162-201 37.1314mm .5512 162-658 31.13 162-728 37.139/16” .5625 162-022 31.13 - -

14.50mm .5709 162-660 30.45 162-730 37.130 37/64” .5781 162-024 31.13 162-206 37.13

.511” 15mm .5906 162-662 30.45 162-732 37.13 to 19/32” .5938 162-026 31.13 162-208 37.13 .695” 39/64” .6094 162-027 31.13 - - (1/8”) 15.50mm .6102 162-664 30.45 - - Thick 5/8” .6250 162-028 31.13 - -

16mm .6299 162-666 31.13 - -41/64” .6406 162-029 31.13 162-211 37.1316.50mm .6496 162-668 30.45 - -21/32” .6563 162-030 31.13 162-212 37.1317mm .6693 - - 162-740 37.1343/64” .6719 162-031 31.13 162-213 37.1311/16” .6875 - - 162-214 37.1317.50mm .6890 - - 162-215 37.1345/64” .7031 162-036 34.88 162-218 41.4018mm .7087 - - 162-742 41.4023/32” .7188 162-038 34.88 162-220 41.4018.50mm .7283 162-674 34.28 162-744 40.6547/64” .7344 162-040 34.88 162-222 41.4019mm .7480 162-676 34.28 162-746 41.403/4” .7500 162-042 34.88 162-224 41.4049/64” .7656 162-044 34.88 162-226 41.40

1 19.50mm .7677 162-045 34.88 - - .690” 25/32” .7813 162-046 34.88 162-228 41.40 to 20mm .7874 - - 162-748 41.40 .960” 51/64” .7969 162-047 34.88 162-229 41.40 (5/32”) 20.50mm .8071 162-680 34.28 - - Thick 13/16” .8125 162-048 34.88 162-230 41.40

21mm .8268 - - 162-752 41.4027/32” .8438 162-050 34.88 162-232 41.4055/64” .8594 162-051 34.88 162-233 41.4022mm .8661 162-684 34.88 - -7/8” .8750 162-052 34.88 162-234 41.4057/64” .8906 - - 162-235 41.4023mm .9055 - - 162-237 41.4029/32” .9063 162-054 34.88 - -59/64” .9219 162-056 34.88 162-238 41.4015/16” .9375 162-058 34.88 162-240 41.4024mm .9449 162-686 34.28 162-756 41.40

Series Diameter TIN TIALN Min. to Inch Decimal Coated Coated Max Metric (in.) Code No. SALE $ Code No. SALE $

31/32” .9688 162-062 41.03 162-244 48.6863/64” .9843 162-064 41.03 162-246 48.681” 1.0000 - - 162-248 48.68

1-1/64” 1.0156 162-068 41.03 162-250 43.5826mm 1.0236 162-688 41.03 - -1-1/32” 1.0313 162-070 41.03 162-252 48.681-3/64” 1.0469 162-071 41.03 162-253 48.681-1/16” 1.0625 162-072 41.03 162-254 48.6827mm 1.0630 162-073 41.03 162-255 48.68

2 1-3/32” 1.0938 162-074 41.03 162-256 48.68 .961” 28mm 1.1024 162-690 41.03 162-760 48.68 to 1-7/64” 1.1094 162-075 41.03 - - 1.380” 1-1/8” 1.1250 162-076 41.03 162-258 48.68 (3/16”) 29mm 1.1417 - - 162-762 48.68 Thick 1-5/32” 1.1563 162-078 41.03 162-260 48.68

30mm 1.1811 162-694 41.03 162-764 48.681-7/32” 1.2188 162-082 41.03 162-264 48.6831mm 1.2205 - - 162-265 48.681-1/4” 1.2500 162-084 41.03 162-266 48.6832mm 1.2598 162-696 41.03 162-766 48.681-9/32” 1.2813 162-086 41.03 162-268 48.6833mm 1.2992 162-698 41.03 162-768 48.681-5/16” 1.3125 162-088 41.03 162-270 48.6834mm 1.3386 - - 162-770 47.781-11/32” 1.3438 162-090 41.03 162-272 48.681-3/8” 1.3750 162-092 41.03 162-274 48.6835mm 1.3780 - - 162-772 47.78

For any of our other series, (Y, Z, 3, 4)Please see page B55 of the Sowa catalogue

CUTTING TOOLS

1-800-265-8221 www.sowatool.com8

Description Contents Code No. SALE $ 82º Sizes 0, 1, 2, 3, 4 121-035 256.00

SUPERHSCO-T15 TiN 132ºTiAlN

For drilling in High Alloy materials & exoticmaterials, T15 may also be used in generalpurpose applications where increased speedsand enhanced wear resistance is required.

Super HSCO (T15) Spade Drills

Jaw Jaw Width Opening Depth Weight Code No. SALE $ 4” 4” 1-3/8” 10lb 370-211 52.00

• High tensile iron casting• Cold rolled screw thread• Plain jaws of special steel

The forming ring is used for cutting soft jaws by clamping and extendingthe thru hole to increase the accuracy of clamping the workpiece

The size can be adjusted against the helical slot.

Pin can be rotated 180º to extend the clamping range.

No need to drill new hole. The hole on the soft jaw can beused directly for pin

For Chuck Weight Model No. Dia. (kg) Code No. SALE $ VFR-05 5” 1 326-250 255.83 VFR-06 6” 1.5 326-255 324.75 VFR-08 8” 2.4 326-260 373.88 VFR-10 10” 3.2 326-265 393.53 VFR-12 12” 5 326-270 590.33

Limited Supply

Super Precision Keyless Drill Chucks Soft Jaw Forming Rings

Type 25 & Type 32 Collet Chuck Sets

Chuck Code No. SALE $COLLET SETS CONSIST OF 10 COLLETS 1/8” - 1” (TYPE 25)

ISA-30 334-600 370.93 ISA-40 334-605 370.93 ISA-50 334-608 435.26 M.T.3 334-610 370.93 R-8 334-620 370.93

COLLET SETS CONSIST OF 15 COLLETS 1/4” - 1-1/4” (TYPE 32) ISA-40 334-625 845.67 ISA-50 334-630 888.51

Keyless chucks are engineered to quickly loosen and tighten a tool onthe chuck collar of the drill, either by manual operation or when torqueis applied. Rotating the chuck collar in a counterclockwise directionwill loosen the tool.• High precision, premium tolerance• The jaws feature a TIN coated surface treatment to assure durability.

Chuck Capacity Model (in.) Mount Code No. SALE $ 6XH 1/64-1⁄4 JT1 536-524 121.24 6XH 1/64-1⁄4 3/8 -24 536-526 71.19 10XH 1/64-3⁄8 JT33 536-530 143.15 13XH 1⁄64-1⁄2 JT6 536-534 122.92 13XH 1⁄64-1⁄2 JT33 536-536 120.75 13XH 1⁄64-1⁄2 1⁄2 -20 536-538 77.56 16XH 1⁄8-5⁄8 JT6 536-540 134.75 16XH 1⁄8-5⁄8 JT33 536-542 126.35

Model Code No. SALE $ VMS-5 325-305 24.38

• Holds 5C, C32, or OZ25 collets• 220x110x6mm• Plastic

* Collets not included

Collets Rack

• Made of tool steel, hardenedand ground to maintain original accuracy

Size Code No. SALE $1/8 325-315 10.403/16 325-320 10.401/4 325-325 10.405/16 325-330 10.403/8 325-335 10.407/16 325-340 10.401/2 325-345 10.409/16 325-350 10.405/8 325-355 10.4011/16 325-360 10.403/4 325-365 10.4013/16 325-370 10.407/8 325-375 10.4015/16 325-380 10.401 325-385 10.40

5C Collet Set 1/8-1” 325-310 119.30

5C Collets

• Solid one piece body• Square and parallel within 0.0002” and 0.0003”

• Angled centre channel provides extra jaw capacity

Jaw Jaw Model Length Width Opening Height Code No. SALE $ YCT-VB20 140mm 48mm 65mm 25mm 230-815 100.73 YCT-VB25 170mm 63mm 90mm 35mm 230-820 123.06 YCT-VB30 180mm 73mm 90mm 35mm 230-825 133.42 YCT-VB35 225mm 88mm 125mm 45mm 230-830 204.96

Drill Press Vise

Toolmaker Vises

Set includes:1 chuck, 1 wrench, 1 each collet and fitted caseType 25• 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4”, 7/8”, 1”

Type 32• 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”,1”, 1-1/8”, 1-1/4”

WORKHOLDING

1-800-265-8221 www.sowatool.com 9

1-800-265-8221 www.sowatool.com

WORKHOLDING

10

Tap Nose GaugeRange Dia. Length

Taper Hand System (in.) (in.) Code No. SALE $ 40 3/8” - 3/4” 2 2.323 2.874 531-614 645.05

SYNCHROLIZE TAPPING SYSTEM FOR RIGID TAPPING

• Slim nose Design• Up to 200% increase in tap life

Slim Nose Design

Designed forPERFECT hole alignment

• See page G28 of our catalogue for ER25 tap collets

Tap Collet NoseSystem Range Style Length Dia. Code No. SALE $ 2 3/8” - 3/4” ER25 28mm 42mm 338-122 313.04

• Opposing set screws to secure tap• Designed for perfect hole alignment

Benefits• Higher quality threads• No tapped holes out of tolerance• Increased tool life• Less time spent changing tools• Less time spent inspecting• Adapters make tap changes fast and easy. Change taps in spindle without presetting equipment• Up to 9” of gauge length can be obtained when using the extension system

CAT Taper Synchrolize Tap Chuck Synchrolize Quick Change Tap Adapter

0.039” Tension Stroke0.008” Compression Stroke

De s i g n e d f o r t o d a y ’s h i g h p e r f o rman c e ma c h i n e r y

• See page G80-G81of our catalogue for more about the Synchrolize Tapping System

Case Hardened and ground shankand shaft

Positioning pin with automatic release

Modular antirotation group

Angular contact preloadedball bearings of precisionclass ABE 7/9

Gleason ground spiral bevelgears for maximum performanceand minimum vibration

Graduated ring

Output- ER Collet (Standard)- Weldon- Shell mill holder- Special

Design

The compact design, along with mentionedspecifications allows for the highestperformances, high speeds and long tool life

Standard 10Bar coolantthrough pin

Treated steel head bodywith 360º position andinternal air pressure, maximum rigidity and corrosion resistant. Minimum thermal expansion

Download your copy today

Do you have a question on aspecial application?

Need a Quote?Contact our customer servicerepresentatives - From Mon-Fri,

7:30am to 6:00pm

111-800-265-8221 www.sowatool.com

WORKHOLDING

Code No.: 604-336

Vacmagic® VM300

Workholding Specialists

The All-in-One Pallet Changer and Vacuum SystemIn a relatively short amount of time the VM300 has established itself as the vacuum system to which all others are measured. Capabilities include traditional vacuum applications using ourstandard vacuum pallet and custom vacuum applications (ie. machining blank pallet to suit specific part geometry) and theability to perform as a rock solid pallet changer.

• Simple design keeps cost low• Quick-change - swap pallets in 30 seconds or less• Productivity maximized - load pallets while machining• Easy to install and set-up• Precise repeatability• Reliable and easy to use - virtually maintenance free • Flexible pallet design - limited only by your imagination!• No pumps - uses standard shop air

Tech DataAir Supply Requirements . . . .70 psi (5 bar)

2 CFM (55 LPM)Low Pressure Safety Switch . .includedVacuum Indicator . . . . . . . . . . includedHardened Locator Pins . . . . . . .included

B

A

C

$ 5,583.68

Mitee-Bite has a new catalogue.Visit our website orcall to get your copy.

Scan for download page

$6,979.60 Value

Printed in Canada

*CADIS41*

Pricing valid from January 1 to March 31, 2018 or while quantities last.

Sowa Tool & Machine Co. Ltd.500 Manitou DriveKitchener, OntarioN2C 1L3

Western Canada Branch9649-49th AveEdmonton, ABT6E 5Z5

Toll Free: 1-800-265-8221Phone: (519) 748-5750Fax: (519) 748-9304Email: sales@sowatool.comweb: www.sowatool.com

We reserve the right to make changes without notice and accept no liabilities for mistakes and printing errors. All taxes extra.

100% Forged ConstructionCertified Balanced up to 30,000 r.p.m. (with Nut on Holder)DIN Coolant Thru The Flange - StandardTraverse Ground Throughout

2 Coolant Options Standard

Note: You can see the compression of the steel core of the tool holder during the forging process= Strongest holder on the market

FACTS ABOUT HOLDERS

• DIN Coolant through the flange option standard (Most competitors Standard Holders do not offer this - you need to orderthis as a special feature which is more expensive than GS standard holders)• AT3 or better taper accuracy• Material: Low Carbon Chromium-Molybdenum Alloy Steel - SCM415 hardened to HRC 58-60• Maximum TIR 0.0002” O.D. to I.D.• Each holder balanced with Haimer machine• Each holder comes with a certificate of inspection lab reportEnd Mill Holders Taper/RPM• BT30 End Mill Holders balanced to 20,000 rpm• CAT/BT40 & HSK63 End Mill Holders Balanced to 30,000 rpm- (Competitors - 15,000 to 25,000 rpm)

• CAT/BT50 & HSK100 End Mill Holders balanced to 25,000 rpmShrink Fit Holders (Balanceable) -RPM• BT30 balanced to 20,000 rpm• CAT/BT40 & HSK63 balanced to 30,000 rpm• CAT50 & HSK100 balanced to 25,000 rpmCollet Chucks Taper/RPM• Balanced with Nut on Chuck• ER Chucks 30-20,000, 40-30,000, 50-25,000• SA Collet Chucks 30/40-20,000, 50-15,000• TG Single Angle Collet Chucks 30/40-20,000, 50-15,000• DA Collet Chucks 30/40-20,000, 50-15,000