COLD JET: SDI SELECT™

60

DRY ICE & DRY ICE BLASTING EQUIPMENT

The power of selection. Any dry ice. Any application. Anywhere.

Dry ice cleaning continues to become the preferred method for environmental cleaning and surface preparation across an increasing number of industries. Cold Jet remains ahead of the curve with the SDI Select™ 60, a dry ice cleaning system that offers the value of delicate cleaning and high-level aggression all in one frame.

Designed with application variability and ever-changing industry demands in mind, the SDI Select™ 60 can navigate the dry ice cleaning spectrum with ease.

Showcasing Cold Jet’s patented shaved dry ice technology, the SDI Select™ 60 can clean large surfaces of thin, hard contaminant, without damaging the substrate. And when faced with heavier contaminants, simply bypass the shaving media, turn up the aggression and clean using full 3 mm pellets.

ERGONOMIC APPLICATORINTUITIVE CONTROL PANEL

WELDED STEEL FRAME

360° TURNING RADIUS

EASY-OFF PANELS

ERGONOMIC HANDLES

Cold Jet’s patented feeder technology creates shaved dry ice on demand, regardless of input.

Simply switch to full pellet cleaning to penetrate the most difficult, thick contaminants.

The SDI Select™ 60 can accept any form of dry ice for their cleaning medium; block, pellet or slices.

COLD JET SDI SELECT™ 60

DRY ICE & DRY ICE BLASTING EQUIPMENT

CONTINENTAL CARBONIC PRODUCTS, INC.3985 E. Harrison Ave.Decatur, IL 62526217-428-20681-800-DRY-ICE2www.continentalcarbonic.com

© 2016 All Rights Reserved. 1-23456789-2 DESC 03/16

DRY ICE PURCHASINGTo purchase dry ice pellets contact us at 1-800-DRY-ICE2 (379-4232).

MACHINE PURCHASE AND RENTAL OPTIONS We maintain a rental fleet of blasting equipment. We will rent our equipment on a weekly or monthly basis. Ask us about rental equity towards the purchase of a dry ice blasting machine. Visit www.continentalcarbonic.com and fill out an inquiry form online.

FEATURES

• Shave with any dry ice media (block, pellet, slices)• Bypass for full 3mm pellet performance• Clean from as low as 50 CFM, using 1/3 of the

compressed air, thus reducing noise levels and air usage vs. alternative dry ice cleaning systems.

• Increase blast pressure up to 250 psi to clean the most stubborn contaminants.

• Choose from any Aero nozzle or accessory to maximize flexibility

SPECIFICATIONS

• Dimensions inch/cm• Length: 24 / 61• Width: 28 / 71• Height: 43 / 109• Weight: 343 lbs. without pressure regulator• Weight: 365 lbs. with optional pressure regulator• Hopper Capacity: 60 lbs. (block) 50 lbs. (pellet)• Hopper Dimensions: 10”x10”x12”• Dry Ice Consumption: 0 - 6 lbs./min, adjustable• Supply Air Pressure: 65 - 250 psi (4.5 - 17.2 bar) • Air Consumption Range: 50 - 215 CFM (1.4 - 6.1 m3/

min) at 80 psi (5.5 bar) for standard nozzles• Blast Pressure Range: 65 - 250 psi (4.5 - 17.2 bar)

without pressure regulator. 20 - 250 psi (1.4 - 17.2 bar) with optional pressure regulator

• Compressed Air Connection: 1” NPT