ECNO:1005k

Microjet Recorder SeriesColor Printer

Fuji Instrumentation & Control

1 2

Ink Jet Technology

The ink jet head is formed on astable quality silicon chip.The ink jet head printing mechanismdoes not touch the chart paper, allowing reliablerecording.

The ink jet mechanism is formed on a thin silicon chip (17.6x 16mm) using silicon micro machining technology.It is provided with piezo elements.With voltage applied to the piezo elements, the shape ofthe elements changes as shown in the diagram, and inkparticles are ejected from the tip of the nozzle.These particles are very small and fast, and draw a series ofvery small dots of about 0.3mm diameter on the chart paper.These small dots are combined together to form charactersand trace lines for clear visible recording.

A Revolution in Recorder Technology

The microjet recorder is a revolutionary recorder, its ink jet colorprinter technology is adopted in industrial type recorders forthe first time in the world.Fuji established ink jet technology based on the unique siliconchip manufacturing process for FCX transmitters.The ink jet printing mechanism provides twelve continuoustraces with a 180mm width recorder and six continuous tracewith a 100mm width recorder without pen offset. Themechanism also provides six sharply defined colors.Microjet recorder was designed with a reduced number ofcomplicated mechanical parts to make it as trouble-free aspossible.

Nozzle

Ink

Piezo Element

(Model :PHC)

4

The ink jet printing mechanism allowscontinuous recording for a maximumof 12 channels (6 channels with 100mmwidth recorder) in 6 different colors.An A/D converter is used for eachinput signal for high speed datasampling to obtain a trace similarto that obtained by conventional penmechanism recorders.Digital printing is also possible inthe same color as the channel color,so clear and visible recording canbe obtained. (for model PHA, PHC)

6 Color High Quality Trace

Microjet

Scale

Instantaneous value

Chart speed

Time

Time line

Tag No./Tag name

Alarm OFF

Alarm ON

3

5

■ Continuous recording・6 colors・180mm width, 12 channels

100mm width, 6 channels■ Digital data printing in channel

color■ Self-printing scale in channel

color■ Tag No./Name printing in channel

color, 8 digits (Max)■ Message printing in 6 color■ Long life recording

6 months continuous operation withone cartridge.

■ Color on each channel isselectable

The following status printing is availablefor analyzing recording results.・Alarm

Red at alarm ON, black at alarmOFF, Channel No. and time areprinted・Burnout・ Ink shortage・Recording start mark・Chart speed change mark■ High reliability recording・6 colors continuous trace

・Ink is not soluble in water, excellentwater/sunlight resistingcharacteristics.

■ Compact and light-weight design・Mass (weight): 2.1kg/100mm width

6.0kg/180mm width・Depth: 199mm■ Simple choice・The 100 and 180mm width recorders

are configurable on each channeland accept most industrial inputs.・The recorder operates on AC power

100 to 240V.■ RS-485 Communications

Daily report/totalizationOn a daily report, measured values for every hour are printedalong with maximum, minimum and average values.On a totalization, integrated values at intervals of 1 hour andthe total value for one day are printed.

Logging printPrinting of measured values at intervals of 10-60 minutes.Note: Analog trace is not available for logging printing.

Parameter list, test patternConfiguration data can be checked with parameter list.A test pattern of all colors and all combinations of colors isavailable.

Zoom, zone, auto-range traceSpecial traces that match the operating conditions of the plantare available.

Report Generation

Microjet RecorderPHC/PHA

(PHC)(PHA)

Simple Operation4-key operation (with door closed)

German and French languages can be displayed.

A. Record start/stop keyB. Display select keyC. Measured value print keyD. Chart feed key

(PHC)

(PHA)

4-key configuration (with door open)

Configuration can be done according to operation guide

E. Select keyF. Up keyG.Down keyH. Data entry key

(PHC)

(PHA)

6

Simple DesignThe ink jet mechanism is simplein design.Electronic parts are increasinglyused in the recorder.Mechanical parts have beenreduced to about 1/3 that ofconventional recorders and itcomprises about 2/3 of the totalnumber of parts.The small size (199mm deep)contributes to panel cost saving.

Fully Configurable inputThis recorder accepts multipleinputs.With a process input, it can recordand print the results of filter,square-root extraction, subtractioncalculation and scaling for eachchannel.

Reduced MaintenanceComplicated servo mechanism isnot used.Each input has its own inputcircuit.Unlike conventional recorders,input scanning relays are notused and hence trouble-freeoperation is ensured.

Simple Design

7

Model PHC PHA

Chart width/length 100mm/15m 180mm/20m

No. of input channel 3/6 6/12

Measuring cycle 160/320ms. 320ms.

Accuracy

Display Fluorescent (20 characters x 2 lines)

Display Accuracy ±0.15% of measuring range, ±1 digit without cold junction compensation error

Analog TraceAccuracy

Display accuracy ±0.25% of measuring range

Calculation * Square root extraction, Subtraction, Scaling, Input filter, Logarithm

Report Generation Daily report, Totalize list, Parameter list, Test pattern, Measured value list, Logging print, Message print

Alarm H, L, RH, RL for each input, Burnout, Ink-out, Chart end, Battery alarm

Alarm output 6 Relay output 6/12 Relay output

Option

100-240V AC(Usable Range 85-300VAC)

100-120V AC or 200-240V AC(Usable Range 85-150VAC or 150-300VAC)

EnvironmentalTemperature: 0 to 50°C IEC IP50Humidity: 20 to 80%RH

(Temp. (°C) x Humi. (%RH) < 3200)

Mass {weight} Approx. 2.1kg (without options) 6kg (without options)

Remote control Record start/stop, Chart speed change, Measured value print, Message print

Communication RS-485 RS485, T-Link

Chart Illumination Cold cathode fluorescent

Chart speed5-400mm/h continuous trace401-1500mm/hintermittent trace

5-300mm/h continuous trace301-1500mm/hintermittent trace

Recording cycle

Power supply

Recording =

cycle (sec.)Recording cycle is more than 2 seconds.

Input Signal type TC (J, K, E, R, B, S, T, L, U, W, PN, N), RTD, DC V (±50mV,±500mV, ±5V, ±50V DC), DC mA

400Chart speed (mm/h)

Recording =

cycle (sec.)Recording cycle is more than 3 seconds.

450Chart speed (mm/h)

* Consult Fuji Electric Instruments for additional features not listed such as flowintegration record and calculation of input signal, etc.

Specification Summary

8

144mm

136.4mm

144mm 158mm 41mm

199mm26mm

Dimension of PHC (100mm width)

288mm

280mm

288mm 160mm 39mm

199mm18mm

Dimension of PHA (180mm width)

Code Symbols

P H C 300 -

-V

Recording points

3 continuous recording

6 continuous recording

6 intermittent recording

3

6

6

3

6

7

Power Supply

100 to 120V AC 50/60Hz

200 to 240V AC 50/60Hz

A

E

Chart paper illumination

Without

With

A

B

Transmission function

Without

With RS-485

Y

R

Alarm output/external control

Without

6-point alarm output (N.O.)/

3-point external control

6-point alarm output (N.C.)/

3-point external control

0

1

2

Description

1 2 3 4 5 6 7 8 9 10 11 12 13

P H A 400 -

-VE

Recording points

6 continuous recording

6 intermittent recording

12 intermittent recording

12 continuous recording

6

6

8

8

6

7

8

9

Chart paper illumination

Without

With

A

B

Transmission function

Without

With RS-485

With T-Link

Y

R

T

Alarm output/external control

Without

6-point alarm output/3-point

external control

12-point alarm output/3-point

external control

0

1

2

Description

1 2 3 4 5 6 7 8 9 10 11 12 13

Note) 1. Input signalSetting prior to delivery is as follows;• Thermocouple K: 0 to 1200˚C

2. Shunt resistor (10Ω± 0.1%) should be ordered separately for current input.Shunt resistor : Ordering code PHZT8101 for PHA, PHZT1101 for PHC

3. T-Link transmission function is Fuji's original PLC Link transmission function

9

Model PHE1 PHE2 PHE7, 8, 9

Chart width/length 100mm/15m

No. of input channel 1 2 6

Measuring cycle 200ms/point30s/all point with inputscanning relay

Input/Recording range User programmable or factory configuration

Accuracy

Display LED (7 segments x 6 digits)

DisplayAccuracy

(±0.3% ＋1 digit) of measuring range (DC voltage, DC current input )

Analog traceAccuracy

Display accuracy ±0.2% of measuring range

Power supply 100-120V AC or 200-240V AC

Mass {weight} Approx. 1.2kg (without option) 1.2kg (without option) 1.5kg (without option)

Alarm L/LL, H/L, H/HH

Alarm output 2 relay output 4 relay output 6 relay outputOption

Remote control Chart speed change

Chart speed 10/20/24/30/50/120/200/300/400 mm/h10/20/24/30/50/120/200/300/400/1000/1200/1500 mm/h

During analogrecording

Printingfunction

Channel No., Periodic data, Scale, Alarm, Burnout, Date and Time

Independent of analogrecording

Instantaneous value list, Parameter list, Scale list, Test Pattern

Other Recording start mark, Chart speed change mark

Signal type TC (J, K, E, R, B, S, T, L, U, W, PN, N), RTD, DC V (±50mV,±500mV, ±5V, ±50V DC), DC mA

Recording cycleRecording

=cycle (sec.)Recording cycle is more than 2 seconds.

400Chart speed (mm/h) 30s/all point

EnvironmentalTemperature: 0 to 50°C IEC IP50Humidity: 20 to 80%RH

(Temp. (°C) x Humi. (%RH) < 3200)

Microjet Recorder-EPHE

Specification Summary

Inkjet technology, previously available only onexpensive printers, is now available on a strip chartrecorder at an affordable price, a price that fallsbelow the cost of some dot matrix type printers. If you note the comparison between the dot matrixand inkjet typeface, there simply is no reason to usea dot matrix type recorder anymore.

・This recorder has basically 2 models, user programmablemodel and factory configuration model.・Factory can pre-configure recorder parameters with

customer supplied information prior to shipment, reducingthe users' total installation cost and time.・In case of 1 or 2 continuous recording, 2-color type Ink

cartridge (PHZH2002) is also available.Since its life-span became longer than before, you can cutthe running-cost in 1/4-1/2.・Real time clock (calendar) function is available with

standard specification.

10

P H E 200 --

VV V E

Recording points1 continuous recording2 continuous recording6 intermittent recording

129

1234

Power Supply・Temperature Unit100 to 120V AC 50/60Hz ˚C200 to 240V AC 50/60Hz ˚C100 to 120V AC 50/60Hz ˚F200 to 240V AC 50/60Hz ˚F

Alarm output/external control input(1 point)Without2 points alarm output (1 continuous only)4 points alarm output (2 continuous only)6 points alarm output (6 intermittent only)2 points alarm output/External control (1 continuous only)4 points alarm output/External control (2 continuous only)6 points alarm output/External control (6 intermittent only)

01

2

3

Description1 2 3 4 5 6 7 8 9 10 11 12 13

Input : Universal (Programmable)Range : Field settable (Programmable)

Note) 1. Input signal Setting prior to delivery is as follows; • Thermocouple K: 0 to 1200˚C 2. Shunt resistor (10Ω± 0.1%) should be ordered separately for current input. Shunt resistor : Ordering code PHZT 1101

User programmable model

A

B

C

144mm

144mm

Continuous type

175mm

Intermittent type

197mm

Outline diagrams

Code Symbols

P H E 2 --

Y

Recording points1 continuous recording2 continuous recording6 intermittent recording (single scale) 6 intermittent recording (double scale)

1278

Input signal 1 continuous　　　　　　　 ＊ Y　2 continuous ＊ ＊

6 intermittent (single range) ＊ Y6 intermittent (double range) ＊ ＊ Symbols of input signalsX...... B thermocouple R...... R thermocoupleS...... S thermocouple K...... K thermocoupleE...... E thermocouple J...... J thermocoupleT...... T thermocouple N...... N thermocoupleW...... W thermocouple L...... L thermocoupleU...... U thermocouple P...... PN thermocouple

H...... Pt100

A...... 1 to 5V DC B...... 4 to 20mA DC *1C...... 10 to 50mA DC *1 M......± 50mV DCO...... ± 500mV DC V......± 5V DCF...... ± 50V DC

Description

＊

Power supply・ Temperature Unit100 to 120VAC 50/60Hz °C 200 to 240VAC 50/60Hz °C 100 to 120VAC 50/60Hz °F 200 to 240VAC 50/60Hz °F

1

432

Alarm output/external control input (1 point) Without2 points alarm output (1 continuous only)4 points alarm output (2 continuous only)6 points alarm output (6-intermittent only)2 points alarm output/External control (1 continuous only)4 points alarm output/External control (2 continuous only)6 points alarm output/External control (6 intermittent only)

10

A32

B

C

＊

measuring range 1 continuous　　　　　　　 ＊ Y　2 continuous ＊ ＊

6 intermittent (single scale) ＊ Y6 intermittent (double scale) ＊ ＊ measuring range code are specified for each input signal.

＊

Instruction manualNot attachedEnglish

＊

Y

1 2 3 4 5 6 7 8 9 10 11 12 13

Note) Recorder will be shipped with 10Ω shunt resistor attached to terminal for current input. For intermittent double scale type, 2 kind of recording range and unit should be specified. One is for channel 1 to channel 3, the other is for channel 4 to channel 6.

Factory configuration model

EYY

Printed in Japan 2009-4/10FIS

International Sales Div.1Sales GroupGate City Ohsaki, East Tower, 11-2, Osaki 1-chome,Shinagawa-ku, Tokyo 141-0032, Japanhttp://www.fesys.co.jp/engPhone: 81-3-5435-7280, 7281 Fax: 81-3-5435-7425http://www.fic-net.jp/eng

Information in this catalog is subject to change without notice.