4
PRODUCT SPECIFICATIONS THE LEVITON LOAD CENTER Leviton Mfg. Co., Inc. 201 North Service Road, Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com © 2020 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice. FEATURES AND BENEFITS • In compliance with standards UL 67, UL 50, UL 50E, UL869A, EUSERC - SEC. 300, NEMA type 3R • Semi flush, Underground feed/Overhead feed capable 2 • 5th jaw accessory available at 9 o’clock or 6 o’clock position • Factory installed main breaker in main breaker catalogs • Solar-ready for future installations • Provision for two field-install CTs • Powder coated • Tin Plated Copper bussing on all models for superior quality and conductivity • Up to 225A bussing for solar photovoltaic (PV) backfeed Combination Service Entrance Devices Solar-Ready, Semi flush, Ring Type APPLICATION Leviton’s Solar-Ready Meter-Load Center Combination Panels, also called “All-in-Ones”, are Electric Utility Service Equipment Requirements Committee (EUSERC) and California Title 24 1 compliant. The panels feature an award-winning installation design that makes them the ideal solution for integrating alternative energy sources into any residential system. THE LEVITON LOAD CENTER ADVANTAGE Easy Installation Allows for all wiring at rough-in 3 , without any circuit breakers present. Our all plug-on design increases efficiency and provides room for hands to move and work freely. Safer The only GFCI circuit breaker on the market that exceeds UL requirements 4 for ground-fault protection, helping to ensure the safety of residents. Other load centers may allow users to reset GFCI circuit breakers leaving them with unprotected power. Optional Smart Wi-Fi ® or Ethernet connection options for remote monitoring, tripping and firmware updates for each circuit in the home. 1 California Title 24, Section 110.10 2 OH Service Application requires the use of the applicable Overhead Tunnel Kit 3 For applications up to 60A when using copper wire; or 50A when using aluminum wire 4 The UL943 standard exempts GFCI circuit breakers from detecting and warning when the trip solenoid and/or switching semiconductor fails in the “open” state, rendering the GFCI circuit breaker incapable of tripping in response to a fault condition, resulting in complete loss of GFCI protection.

Combination Service Entrance Devices · Combination Service Entrance Devices Solar-Ready, Semi flush, Ring Type APPLICATION Leviton’s Solar-Ready Meter-Load Center Combination Panels,

  • Upload
    others

  • View
    13

  • Download
    0

Embed Size (px)

Citation preview

PRODUCT SPECIFICATIONS

TH

E LE

VIT

ON

LO

AD

CEN

TER

Leviton Mfg. Co., Inc. 201 North Service Road, Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com © 2020 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

FEATURES AND BENEFITS • In compliance with standards UL 67, UL 50,

UL 50E, UL869A, EUSERC - SEC. 300, NEMA type 3R

• Semi flush, Underground feed/Overhead feed capable2

• 5th jaw accessory available at 9 o’clock or 6 o’clock position

• Factory installed main breaker in main breaker catalogs

• Solar-ready for future installations• Provision for two field-install CTs• Powder coated• Tin Plated Copper bussing on all models

for superior quality and conductivity• Up to 225A bussing for solar

photovoltaic (PV) backfeed

Combination Service Entrance Devices Solar-Ready, Semi flush, Ring Type

APPLICATION Leviton’s Solar-Ready Meter-Load Center Combination Panels, also called “All-in-Ones”, are Electric Utility Service Equipment Requirements Committee (EUSERC) and California Title 241 compliant.

The panels feature an award-winning installation design that makes them the ideal solution for integrating alternative energy sources into any residential system.

THE LEVITON LOAD CENTER ADVANTAGEEasy Installation Allows for all wiring at rough-in3, without any circuit breakers present. Our all plug-on design increases efficiency and provides room for hands to move and work freely.

Safer The only GFCI circuit breaker on the market that exceeds UL requirements4 for ground-fault protection, helping to ensure the safety of residents. Other load centers may allow users to reset GFCI circuit breakers leaving them with unprotected power.

Optional Smart Wi-Fi® or Ethernet connection options for remote monitoring, tripping and firmware updates for each circuit in the home.

1 California Title 24, Section 110.102 OH Service Application requires the use of the applicable Overhead Tunnel Kit3 For applications up to 60A when using copper wire; or 50A when using

aluminum wire4 The UL943 standard exempts GFCI circuit breakers from detecting and warning

when the trip solenoid and/or switching semiconductor fails in the “open” state, rendering the GFCI circuit breaker incapable of tripping in response to a fault condition, resulting in complete loss of GFCI protection.

PRODUCT SPECIFICATIONST

HE

LEV

ITO

N L

OA

D C

ENT

ER

Ordering Information

Maximum Ampacity

Catalog Number

Enclosure Material

Service Application Phase Number

of Jaws

Types of

Bypass

Type of Cover

Opening for Underground

Conduit

EUSERC Reference Drawing Number

Number of Branch Breaker

Positions

Over/Under Semi-Flush Construction

125 LP112-SRGalvanized

SteelUG/OH2 Single 4 None Ring Type 3” Maximum 301 12

200 LP120-SRGalvanized

SteelUG/OH2 Single 4 None Ring Type 3” Maximum 301 12

Main Lugs Only

200 LP120-SRLGalvanized

SteelUG/OH2 Single 4 None Ring Type 3” Maximum 301 12

2 OH Service Application requires the use of the Overhead Tunnel Kit (LOTK1)

CAT NO LP120-SR

DIMENSIONAL DRAWINGS

SECURING / LOCKINGSCREW

LATCH TO PERMITTHE POSITIVE LOCKING

RINGED COVER SECUREDBEHIND THE METER

33.6"

1.5"

8.6" 11.6"

34.9"

6.6"

27.7"

10.7"

A

A

CONDUIT GROUNDING LUG14-2/0 KCMIL Cu12-2/0 KCMIL Al

NEUTRAL TERMINAL#4 - 300 KCMIL

1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2" KO

15.1"

7.3"

16.8"

1/4" KO 2X

3/4, 1", 1 1/4", 1 1/2", 2" KO 2X

1/2", 3/4", 1" KO

1/2" KO 13X

1/2", 3/4" KO 3X

1", 1 1/2", 2", 2 1/2", 3" KO

1/2", 3/4" KO 4X 1/2" KO 2X

1/4" KO 2X

1/2", 3/4", 1" KO 3X

3/4", 1", 1 1/4", 1 1/2", 2" KO

7.3"

3/4", 1", 1 1/4", 1 1/2" KO

1.2"

SECTION ASERVICE CONDUCTORTERMINALS #4 - 300 KCMIL

PRODUCT SPECIFICATIONS

TH

E LE

VIT

ON

LO

AD

CEN

TER

Ordering Information

Maximum Ampacity

Catalog Number

Enclosure Material

Service Application Phase Number

of Jaws

Types of

Bypass

Type of Cover

Opening for Underground

Conduit

EUSERC Reference Drawing Number

Number of Branch Breaker

Positions

125 LP312-SRGalvanized

SteelUG/OH2 Single 4 None Ring Type 3” Maximum 301 30

200 LP320-SRGalvanized

SteelUG/OH2 Single 4 None Ring Type 3” Maximum 301 30

2 OH Service Application requires the use of the Overhead Tunnel Kit (LOTK3)

DIMENSIONAL DRAWINGS

CAT NO LP320-SR

43.0"

1.5"

8.5" 11.5"

44.2"

6.6"

37.0"

10.7"

A

A

CONDUIT GROUNDING LUG14-2/0 KCMIL Cu12-2/0 KCMIL Al

NEUTRAL TERMINAL #4 - 300 KCMIL

1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2" KO

SERVICE CONDUCTORTERMINALS #4 - 300 KCMIL

3/4", 1", 1 1/4", 1 1/2", 2" KO

1/2", 3/4", 1" KO 3X

1/2" KO 2X1/4" KO 2X1/2", 3/4" KO 4X

1", 1 1/2", 2", 2 1/2", 3" KO

15.1"

7.3"

16.8"

3/4", 1", 1 1/2", 1 1/4", 2" KO 2X1/4" KO 2X

1/2", 3/4", 1" KO

1/2" KO 13X1/2", 3/4" KO 3X

7.3"

3/4", 1", 1 1/4", 1 1/2" KO

RINGED COVER SECUREDBEHIND THE METER

LATCH TO PERMITTHE POSITIVE LOCKING

SECURING / LOCKINGSCREW

1.2"

SECTION A

Leviton Manufacturing Co., Inc.201 North Service Road, Melville, NY 11747-3138Telephone: 1-800-323-8920 • FAX: 1-800-832-9538Tech Line: 1-800-824-3005 Mon-Fri 8am-10pm EST, Saturday 9am-7pm EST

Visit our Website at: www.leviton.com/loadcenter© 2020 Leviton Manufacturing Co., Inc. All rights reserved. TS-121919-dp

Ordering Information

Maximum Ampacity

Catalog Number

Enclosure Material

Service Application Phase Number

of Jaws

Types of

Bypass

Type of Cover

Opening for Underground

Conduit

EUSERC Reference Drawing Number

Number of Branch Breaker

Positions

200 LP420-SRGalvanized

SteelUG/OH2 Single 4 None Ring Type 3” Maximum 301 40

225 LP422-SRGalvanized

SteelUG/OH2 Single 4 None Ring Type 3” Maximum 301 40

2 OH Service Application requires the use of the Overhead Tunnel Kit (LOTK4)

DIMENSIONAL DRAWINGS

CAT NO LP420-SR

8.5" 11.5"

42.1"

1.5"

49.2"

50.5"

6.6"

10.7"

A

A

CONDUIT GROUNDING LUG14-2/0 KCMIL Cu12-2/0 KCMIL Al

NEUTRAL TERMINAL#4 - 300 KCMIL

SERVICE CONDUCTORTERMINALS #4 - 300 KCMIL

1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2" KO

15.1"

7.3"

16.8"

3/4", 1", 1 1/4", 1 1/2", 2" KO 2X

1/2", 3/4" KO 3X

1/2" KO 13X1/4" KO 2X

1/2", 3/4", 1" KO 3X

7.3"

3/4", 1", 1 1/4", 1 1/2" KO

1", 1 1/2, 2", 2 1/2", 3" KO

1/2", 3/4" KO 4X1/2" KO 2X

3/4", 1", 1 1/4", 1 1/2", 2" KO

1/2", 3/4", 1" KO 3X

1/4" KO 2X

RINGED COVER SECUREDBEHIND THE METER

LATCH TO PERMITTHE POSITIVE LOCKING

SECURING / LOCKINGSCREW

1.2"

SECTION A

PRODUCT SPECIFICATIONST

HE

LEV

ITO

N L

OA

D C

ENT

ER