Embed Size (px)
DESCRIPTION
Â
Citation preview
Morris Sallick Industrial Supplies, Inc. Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
DIRTY AIR FILTERS = MORE FUEL CONSUMPTIONIMPROVE FUEL EFFICIENCY BY KEEPING YOUR AIR FILTERS ALWAYS CLEAN
VIA THE USE OF ULTRA EFFICIENT AIR PRECLEANERS
1. The Precleaners have specially designed blades that cause the incoming air to spin.2. As air spins, centrifugal force spins dust, dirt, insects, rain and snow from clean air.3. Contaminants are blown out special discharge ports by a high-velocity air powered rotor.4. Only the purified air goes to the air filter.
What Makes our Precleaner Different From Other Air Intake Precleaners?
• Our precleaners utilize a straight through flow path, meaning that the dirty air entering into the top simply flows straight into our guide vanes and the rotor chamber where centrifugal forces help to drive more than 85% of the contaminants outward where they fall harmlessly through the discharge slots. Only clean air then flows out the discharge into your machine. • Competitors typically use “reverse axial” designs, meaning that the air enters the bottom of the precleaner, where it then must make a U-turn, adding restriction and robbing your engine of additional power. This makes them more restrictive, which means your filters don’t last as long. Also we have some of the most efficient designs available today. • Our precleaners are much more efficienct that conventional precleaners thus your filters will last 6 to 10 times longer.
Morris Sallick Industrial Supplies, Inc. Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
80% OF ENGINE DAMAGE FROM AIR CONTAMINATION COMES FROM MICRO ABRASIVE DUST WHICH IS LESS THAN 20 MICRONS IN SIZE
• Micro-Abrasive dust particles are extremely abrasive. They have razor-like flakes that grind and gouge surfaces, alter clearances, and generate even more abrasive debris. They are drawn into the engine through the air intake and destroy critical precision parts. • Micro-abrasive dust wreaks havoc on your equipment, your high-tech filters and your livelihood. Its particles drastically degrade engine performance and increase fuel-consumption. Not even dual-stage filters can stop these devastating particles.• Our pre-cleaner removes dust in the range of 5 to 20 microns.• This is the only equipment in the market that is able to do this job.• Cartridge air filter life is extended from 6 to 10 times.
What Makes our Precleaner Different From Other Air Intake Precleaners?
• Our precleaners utilize a straight through flow path, meaning that the dirty air entering into the top simply flows straight into our guide vanes and the rotor chamber where centrifugal forces help to drive upwards of 85% of the contaminants outward where they fall harmlessly through the discharge slots. Only clean air then flows out the discharge into your machine. • Competitors typically use “reverse axial” designs, meaning that the air enters the bottom of the precleaner, where it then must make a U-turn, adding restriction and robbing your engine of additional power. This makes them more restrictive, which means your filters don’t last as long. Also we have some of the most efficient designs available today.
Morris Sallick Industrial Supplies, Inc. Mechanical, Electrical, Control/Automation & Instrumentation Process Engineering
ULTRA ADVANCED HYBRID AIR FILTRATION TECHNOLOGY THAT PROVIDES THE FOLLOWING BENEFITS:• PROVIDE A LOWER PRESSURE DROP THAN CONVENTIONAL AIR FILTER SYSTEMS.• PROVIDE FILTRATION EFFICIENCY OF 99% AT 5 MICRONS.• TO HAVE A MUCH LARGER DUST HOLDING CAPACITY THAN ALL OTHER TOP NOTCH FILTERS IN THE MARKET.• THE PRESSURE DROP DIFFERENTIAL FROM NEW TO REPLACEMENT/CLEANING TIME IS TO BE MINIMAL.• DESIGNED TO IMPROVE HORSEPOWER.• TO BE REUSABLE INSTEAD OF REPLACEABLE.• EASY TO CLEAN / USES NO OIL.• TO BE ABLE TO NOTIFY THE OPERATOR THAT THE FILTER IS READY FOR REPLACEMENT/CLEANING.
