Upload
anupthatta
View
219
Download
0
Embed Size (px)
Citation preview
8/14/2019 Comer elecatric drive solutions
1/13
CIADVEWD08-10C3000WheelDriveUnits
wheel drive units
Operating Unit Axles & Wheel Drive Units
42046 Reggiolo (RE) Italy
Via Magellano, 37
Tel. +39 0522 974111 Fax +39 0522 211645
web site: www.comerindustries.com
Electric Wheel DrivesElectric Wheel Drives
8/14/2019 Comer elecatric drive solutions
2/131
Electric Wheel Drives
page
2 Profile
4 Range
6 Transmission with vertical motor
8 Transmission with horizontal motor
9 Rigid and steering axles
10 Mechatronics Research Centre
pag.
2 Profilo
4 Gamma
6 Trasmissioni con motore verticale
8 Trasmissioni con motore orizzontale
9 Ponti differenziali
10 Centro Ricerche di Meccatronica
Electric Wheel Drives
8/14/2019 Comer elecatric drive solutions
3/132
ProfileProfilo
Comer Industries leader a livello internazionale nella progettazione e produzione di sistemiavanzati di ingegneria e soluzioni di meccatronica per la trasmissione di potenza, destinatiai principali costruttori mondiali di macchine per lagricoltura, lindustria e la produzione dienergia rinnovabile.
Comer Industries ha la sede principale a Reggiolo (Reggio Emilia).
La vendita dei prodotti e il supporto alla clientela affidata ad una organizzazionecommerciale diretta, costituita da 3 Divisioni, ciascuna focalizzata su uno specifico settore dimercato: Agri, Industrial e Wind Energy. Comer presidia inoltre i principali mercati esteri conle proprie filiali commerciali negli Stati Uniti, in Cina, Germania, Francia e Regno Unito.
Lo sviluppo dei nuovi prodotti supportato dalla funzione Ricerca e Sviluppo, che ha ufficitecnici di progettazione a Reggiolo (Reggio Emilia), Cavriago (Reggio Emilia) e, recentementea Shaoxing (Cina).
La linea di produzione WHEEL DRIVE UNITS si compone di ruote elettriche verticali, ruoteelettriche orizzontali, sterzi e freni destinati principalmente allimpiego su macchine per lalogistica e la movimentazione interna.
Le trasmissioni della linea WHEEL DRIVE UNITS hanno caratteristiche strutturali, di versatilite di performance duso in grado di rispondere ad ogni necessit operativa.
La continua innovazione di prodotto ed il know-how ingegneristico generano nuovepossibilit applicative oltre al carrello elevatore, quali automobili, trattorini, lavapavimenti,spazzatrici.
8/14/2019 Comer elecatric drive solutions
4/133
Electric Wheel DrivesElectric Wheel Drives
Comer Industries is a global leader in the design and production of advanced engineering
systems and mechatronic solutions for power transmission, supplied to major manufacturers ofagricultural equipment, industrial machinery and of renewable energy applications worldwide.
Comer Industries Headquarters is based in Reggiolo (Reggio Emilia), Italy.
The sale of products and customer support is entrusted to a direct sales organization, consisting of3 divisions, each focusing on a specific market segment: Agri, Industrial and Wind Energy. Comer
Industries also operates in major foreign markets with its own sales subisidiaries in the UnitedStates, China, Germany, France and the United Kingdom. New product development is supportedby the Research & Development Dpt., which has technical design offices in Reggiolo (ReggioEmilia), Cavriago (Reggio Emilia) and recently in Shaoxing (China).
The WHEEL DRIVE UNITS product line is divided into vertical electric wheels, horizontal electricwheels, steerings and brakes mainly employed on material handling and warehousingequipments.
The WHEEL DRIVE UNITS transmissions have structural, versatile and functional performancefeatures capable of meeting every single operational requirement.
The continuous product innovation and the advanced engineering know-how allow the researchof new wheel drives applications different from forklift trucks, like cars, tow tractors, floor-cleaners,sweepers.
8/14/2019 Comer elecatric drive solutions
5/134
RangeGammaTRASMISSIONI CON MOTORE VERTICALE - TRANSMISSION WITH VERTICAL MOTOR
TRASMISSIONI CON MOTORE ORIZZONTALE - TRANSMISSION WITH HORIZONTAL MOTOR
STERZI ELETTRICI E IDRAULICI - ELECTRICAL AND HYDRAULIC STEERINGS
Le ruote elettriche, ad ingranaggi, sono predisposte per il montaggio del motore elettrico in posizione
verticale e con ralla sterzante integrata. Progettate tenendo conto delle pi recenti tecnologie e nel
rispetto delle normative vigenti relative alle trasmissioni per veicoli industriali a batteria. Di pocamanutenzione e di facile assistenza poich il montagggio e lo smontaggio dellle parti assemblate (es.motore elettrico) avviene senza dover rimuovere alcuna parte della trasmissione e degli accessori.
Lubrificazione a bagno dolio.
The gearing transmissions are pre-arranged for the fitting of the electric motor in a vertical position.Developed and designed according to the state-of-the-art technology, they meet all requirements on
power transmission of battery-driven industrial trucks. This type of transmissions need law maintenance
and servicing since the assembly and disassembly of the parts (i.e. electric motor) happens without having
to remove any transmission parts and accessories.Oil bath lubrication.
Le ruote elettriche, ad ingranaggi, sono predisposte per il montaggio del motore elettrico in posizioneorizzontale. Progettate tenendo conto delle pi recenti tecnologie e nel rispetto delle normative
vigenti relative alle trasmissioni per veicoli industriali a batteria. Di poca manutenzione e di facile
assistenza poich il montagggio e lo smontaggio dellle parti assemblate (es. motore elettrico) avvienesenza dover rimuovere alcuna parte della trasmissione e degli accessori.
Lubrificazione a bagno dolio.
The gearing transmissions are pre-arranged for the fitting of the electric motor in a horizontal position.Developed and designed according to the state-of-the-art technology, they meet all requirements on
power transmission of battery-driven industrial trucks. This type of transmissions need law maintenance
and servicing since the assembly and disassembly of the parts (i.e. electric motor) happens without having
to remove any transmission parts and accessories.Oil bath lubrication.
Gli sterzi elettrici sono predisposti per laccoppiamento diretto al motore. Progettati tenendo contodelle pi recenti tecnologie e nel rispetto delle normative vigenti relative alle trasmissioni.
Lubrificazione mediante grasso.
Electric steerings have been specially studied to be fitted directly to the motor. They have been developedand designed according to the latest state-of.the-art technology and meet all requirements on power
transmissions.
Grease bath lubrication.
Lo sterzo idraulico si basa sul principio dellasta cremagliera che agisce su una ruota dentata al cuiasse sono collegate le ruote. Lasta cremagliera azionata da un doppio cilindro idraulico. Progettato
tenendo conto delle pi recenti tecnologie e nel rispetto delle normative vigenti relative alletrasmissioni per veicoli industriali a batteria. Lubrificazione mediante grasso.
Su richiesta: Applicazione per una sola ruota; diverse altezze del piede; diverse flangie per fissaggio
ruota.
The hydraulic steering is based on the principle of the rack rod that acts on a gear wheel to the axis of which
the wheels are coupled. It has been designed according to the latest state-of-the-art technologies and in
compliance with current regulations. It is grease lubricated.
On request: application for one wheel only; various foot heights; various wheel securing flanges.
8/14/2019 Comer elecatric drive solutions
6/135Electric Wheel DrivesElectric Wheel Drives
8/14/2019 Comer elecatric drive solutions
7/136
TRASMISSIONI CON MOTORE VERTICALE - TRANSMISSION WITH VERTICAL MOTOR
TypeWD-100 TypeEL-100 TypeEL-96 TypeEL-300
Lmax Carico max. sulla ruota Max load on the wheel
Cacc Coppia asse ruota max. accelerazione e frenata Max torque on the wheel axis in acceleration and breaking
Ccon Coppia asse ruota continua Continuous torque on the wheel
Rrid Rapporto di riduzione Reduction ratio
Diam Dimensione ruota Wheel dimension
Pmot Potenza max. motore elettrico Motor maximum power
Lmax 1000 kg
Cacc 400 Nm
Ccon 200 Nm
Rrid 25-32
Diam230x75
mmPmot 1500 W
Lmax 1200 kg
Cacc 450 Nm
Ccon 180 Nm
Rrid 18 - 20 - 23 - 32
Diam230x75
mmPmot 2000 W
Lmax 1500 kg
Cacc 500 Nm
Ccon 250 Nm
Rrid 13-15-18-21-24
Diam260x95
mmPmot 3000 W
Lmax 2200 kg
Cacc 1100 Nm
Ccon 400 Nm
Rrid 19.5-24-24.5
Diam310x110
mmPmot 4500 W
8/14/2019 Comer elecatric drive solutions
8/137
Lmax 3000 kg
Cacc 1500 Nm
Ccon 650 Nm
Rrid 10-22-25
Diam350
mmPmot 7000 W
Lmax 3000 kg
Cacc 1500 Nm
Ccon 650 Nm
Rrid 10-22-25
Diam425-470
mmPmot 7000 W
Lmax 3000 kg
Cacc 3000 Nm
Ccon 1450 Nm
Rrid 20
Diam -
mmPmot 3000 W
Electric Wheel DrivesElectric Wheel Drives
TypeEL-92 TypeEL-93-94 TypeEL-700
8/14/2019 Comer elecatric drive solutions
9/138
TRASMISSIONI CON MOTORE ORIZZONTALE - TRANSMISSION WITH HORIZONTAL MOTOR
CVmax 2000 kg
CGmax 970 kg
Cacc 856 Nm
Ccon 380 Nm
Rrid29.3
Diam 300x138 mm
Pmot 2000 W
CVmax 2000 kg
CGmax 970 kg
Cacc 856 Nm
Ccon 380 Nm
Rrid29.3
Diam 350x138 mm
Pmot 2000 W
CVmax - kg
CGmax 1800 kg
Cacc 750 Nm
Ccon 300 Nm
Rrid 12.4-16.5-18.8-21.7
Diam 473x178 mm
Pmot 3800 W
TypeEL-140 TypeEL-150 TypeEL-781
NOTA:Freno sul motore enon sulla trasmissione.
NOTE:Brake on motorside andnot on transmission side.
CVmax Carico max. sulla ruota (in vulkollan) Max load on the wheel (in vulkollan)
CGmax Carico max. sulla ruota (in gomma) Max load on the wheel (in rubber)
CaccCoppia asse ruota max. accelerazione e
frenata
Max torque on the wheel axis in
acceleration and breaking
Ccon Coppia asse ruota continua Continuous torque on the wheel
Rrid Rapporto di riduzione Reduction ratio
Diam Dimensione ruota Wheel dimension
Pmot Potenza max. motore elettrico Motor maximum power
8/14/2019 Comer elecatric drive solutions
10/139Electric Wheel DrivesElectric Wheel Drives
Type5915 TypeS-128
Pdmax 4500 daN
Psmax 5630 daN
Cmax 350 daNm
Rtras 16.95 : 1
Fserv TamburoDrum Brake
Pred Motore elettrico oidraulico / Electric orhydraulic motor
Pdmax 6600 daN
Psmax 12000 daN
Cmax 2400 daNm
Rtras 13.40 : 1 - 24.60 : 1
Fserv Disco in bagno dolioOil bath discs
Pred Motore elettrico oidraulico / Electric orhydraulic motor
Pdmax Portata dinamica max. Max. dinamic load
Psmax Portata statica max. Max. static load
Cmax Coppia max.alle ruote
Max. intermittentoutput torque
Rtras Rapportodi trasmissione
Transmissionratio
Fserv Freno di servizio estazionamento
Service and parkingbrake type
Pred Predisposizione per Input flange
STERZO IDRAULICO - HYDRAULIC STEERING
Type43
Coppia max di picco - Max torque admissible 560 Nm
Pressione massima a coppia max - Max pressure to the max. torque 61 bar
Corsa cilindro - Cylinder stroke 97 mm
Area cilindro - Cylinder area 31.15 cm3
Volume olio - Oil volume 302 cm3
Angolo totale - Total angle 185 30
8/14/2019 Comer elecatric drive solutions
11/1310
Mechatronics Research Centre
Ricerca applicata edinnovazione di prodotto
Lo sviluppo, la sperimentazionee la prova dei prodottiWHEEL DRIVE UNITS vengonoeffettuati nel Centro Ricerchedi Meccatronica di ComerIndustries, realizzato nel 1996
a Reggiolo (RE) per la ricercaapplicata e linnovazione diprodotto.
Dal 2002 il Centro Ricerche inserito nellalbo dei laboratori diricerca pubblici e privati gestitodal Miur, il Ministero italianodellIstruzione dellUniversite della Ricerca, quale primolaboratorio in Italia operativonel campo della meccatronica.
Il Centro Ricerche consente aComer Industries di realizzarelinnovazione, la messa apunto ottimale del prodottoe di comprimere i tempi diesecuzione dei prototipi; aiclienti consente di ridurre iltime to market per il lanciosul mercato delle nuovemacchine.
Applied research and productinnovation
WHEEL DRIVE UNITS productline is developed, tested andapproved in the Comer IndustriesMechatronics Research Center,which has been set up in 1996 atReggiolo (RE) to conduct applied
research and innovation.Since 2002, the Center has beenintroduced in the register of thePrivate and public ResearchLaboratories run by the MIUR,the Italian Ministry of Instruction,University and Research. In theMechatronic sector, the ComerIndustries laboratory is the firstin Italy included in the ministerialprogram.
The Center enables Comer Industriesto maximize innovation, theoptimum product performances,to reduce the prototyping leadtimes and the customers time-to-market required for innovativeprojects.
Centro Ricerche di Meccatronica
8/14/2019 Comer elecatric drive solutions
12/1311
NoteNotes
8/14/2019 Comer elecatric drive solutions
13/13
NoteNotes