Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
LST Radiators • Radiant Panels • Fan Convectors • Door Curtains Trench Heating • Perimeter Heating • Fan Coil Units • Unit Heaters • Chillers
P R O D U C T G U I D E
Welcome
Comfort Zoneto the
With over 100 years experience of delivering high quality, reliable and efficient heat and cooling emitters, Dunham-Bush is in a unique position to offer specifiers a single source for a comprehensive range of technically advanced products.
Whether it’s a high-rise office block, school, leisure centre, car showroom or hospital, we have a heat or cooling emitter to satisfy every application.
CONTENTS
LST radiators (low surface temperature) Page 1
Radiant panels (Evolution, Evo-Lite & Dunham Strip) Page 2
Fan convectors (Series AM Comfort) Page 3
Fan convectors (Avant Garde ECO & Super Comfort) Page 4
Fan convectors (Series BM & Series CM) Page 5
Fan convectors (Series 600, Ceiling Grid) Page 6
Door curtains (Sentry & Sentinel) Page 7
Trench heating (Hydrocourse & Aerocourse) Page 8
Perimeter heating (Finvector) Page 9
Fan coil units (Panther & Lynx) Page 10
Fan coil units (Leopard & Cougar) Page 11
Fan coil units (Puma, Ocelot, Concierge & Zone Flow) Page 12
Unit heaters (Series UH) Page 13
Packaged water chillers (Zeus ACDS Series) Page 14
Packaged water chillers (Achelous AVX-B Series & WCFX-V Series) Page 15
Packaged water chillers (PROmetheus DCLC Series-M & Helios ACHX-B Series) Page 16
Public Buildings
Schools, libraries, transport hubs, airports, prisons, nurseries, sports facilities, colleges, offices, churches, showrooms,
garages, fire stations, police stations, ambulance stations, waiting rooms, museums, theatres
Cooling = C
Heating = H
Healthcare
Hospitals, care homes, schools, prisons, secure units, child care, warden assisted and disabled care facilities,
retirement home, community care and psychiatric premises, sheltered housing, waiting rooms, clinics
Commercial
Retail premises, offices, showrooms, stock rooms, leisure facilities, public houses, restaurants, cinemas, holiday camps
Industrial
Workshops, factories, warehouses, storerooms, hangars, depots, process facilities
Residential and High-End Apartments
KEY /colour codes
QUALITY MANAGEMENT SYSTEMIt is accepted practice at Dunham-Bush to maintain exceptional standards
in engineering and quality. To this end, Dunham-Bush operates a quality
management system to BS EN ISO 9001:2008, which is accredited by the
British Standards Institute.
Full Product Literature can be viewed via the Quick Reference code reader
on each page, or by visiting our website: www.dunham-bush.co.uk
• Surface temperature limited to 43oC, eliminates accidental
scalding
• Fully meets NHS guidelines and tested to BS EN442
• Extensive range of outputs and sizes to suit every
application
• Choice of panel or low water content energy efficient fin
pipe elements
• Quick fit 1st and 2nd fix delivery options
• Bespoke wall to wall fitted systems available
• Compatible with all makes of TRV and LSV
• Lockable access panels and pencil proof grilles
• Optional finishes in BS or RAL colours
Typical Applications: Healthcare, nursing homes, nurseries,
crèches, play and primary schools, warden assisted sheltered
housing, retirement homes, disabled facilities, prisons,
public buildings, community care and psychiatric facilities.
There are 2 versions:
One version has a fin pipe heater element and the second
has a panel radiator element.
Each version has four different styles –
Style A for wet floor areas where the casings are better
sited above the skirting board.
Style B for wet or dry floor areas where pipes enter from
below or through the wall.
Style C for dry floor areas where a robust floor plinth
provides a space for pipe runs.
Style D for vertical casing delivering high performance in
a confined space (width).
Extensive range of sizes. Radiator heights from 450mm to
2400mm. Lengths from 500 to 2400mm. Nominal outputs
from 203W to 3500W @50oC ∆T. Working pressure up to 8-bar gauge.
Evo-Lite Radiant Panel SystemThe standard range consists of one, two or four pipe options
with the same CG, CS, FS and WS models as the Evolution
panels. Working parameters are the same as the Evolution
panels with outputs ranging from 86(W/m) to 444(W/m).
Applications same as Evolution.
Dunham Strip Radiant PanelsApplications include heavy-duty industrial systems where
HTHW up to 180oC or steam up to 10-bar is required.
Outputs range from 125(W/m) to 1999(W/m).
Dunham-Bush LST radiators are designed to deliver efficient, cost effective heat anywhere safety is of paramount importance.
They are the trusted choice for hospitals, nursing homes, nurseries, playschools, retirement homes and public buildings.
RADIANT HEATING PANELSSYSTEM LST RADIATORS
Evolution Great products evolve over time. Our Evolution radiant
panels are designed for ceiling and high wall mounting
and reflect years of on-going research and development.
The result is a range of technically advanced super efficient
panels with mounting options to suit just about every ceiling
and high wall application.
• Ideal for hospital and educational establishments
• Ceiling grid, ceiling surface, freely suspended and wall
surface mounted options for LTHW and MTHW systems
• Lengths from 600mm to 3000mm (specials up to 4800mm)
• Efficient, simple to install and reliable in operation
• Outputs range from 34(W/m) to 944(W/m)
• Finished in white polyester to RAL 9010 30% gloss
• Horizontal panels tested to EN14037 parts 1, 2 and 3
The standard range consists of one, two, four or six pipe
options with lengths from 600 to 3000mm. Installation
options include the following configurations –
CG ceiling grid, CS ceiling surface fix, FS freely suspended,
WS wall or surface application.
No special tools or training are required to install the
Evolution panel system.
1 2
H HC
System LST
Evo-Lite Radiant Panel
Evolution Radiant Panel
Dunham Strip
• Manufactured in the UK
• Rugged durable construction
• Lockable access panels and pencil proof metal grilles
• Optional electronic speed controls
• External, internal or remote control switches
• Bespoke colours and finishes available
• EC fan motor option
Series AM Comfort HeatersThe versatile range of 22 standard models, each produced
in four casing lengths and three coil types, allows Series AM
fan convectors to be used for many applications, such as
schools, colleges, elderly persons homes, libraries, offices
and churches.
All models can be supplied in a range of nominal heat
outputs from 2.6kW to 12.7kW with lengths from 695mm
to 1495mm. Nominal outputs are based on LTHW 80/70oC,
ambient at 18oC and coil type WA2.
Super ComfortSuper Comfort fan convectors are high specification units
that are readily available from stock to meet fast delivery
to site requirements. For absolute safety these units feature
rounded corners, pencil proof metal grilles and security locks
on all access panels. A top quality build ensures reliability
and a long and trouble-free working life. Because all Super
Comfort fan convectors operate on low temperature hot
water, they provide highly efficient, fast response warm
air heating, making them ideal for schools, colleges, care
homes, offices and many other applications.
There are five models in the range, each model is available
in four sizes – fig 3, fig 6, fig 10 and fig 15.
AM13 floor standing with front discharge
AM25 floor standing with curved discharge grille
AM38 high wall mounted unit with curved discharge grille
AM31 ceiling mounted unit with curved discharge grille
CM SA floor mounted unit with front discharge grille
600mm high unit with front discharge grille
• Outputs range from 1.7 to 12.5kW.
• All metal rounded corners and access panel locks
• Pencil proof metal grilles
• Quality UK manufacture
• BS EN ISO quality assurance system
• Durable finish
• Quiet operation
• Fast delivery
Avant Garde ECO Fan ConvectorsECO models are for use in conjunction with low return
temperature systems (i.e. condensing boilers).
The Avant Garde Series AM and BM fan convectors is the
next generation heat emitter. Careful and ingenious design
allows condensing boiler plants to operate at maximum
efficiency at all times and with the minimum capital
investment.
Traditional low-pressure hot water (LPHW) heating systems
operate at 82oC flow and 71oC return during peak loads
on both compensated (radiators etc) and constant (fan
convector etc) temperature systems.
The Dunham-Bush Avant Garde unit is designed to operate
at 55oC flow and 35oC return during peak loads, whilst
maintaining the same duty, options and features as Dunham-
Bush’s extensive range of Series AM and Series BM fan
convector heaters.
• Boiler return temperature is always below 55oC, ensuring
the boiler is in condensing mode at all times
• Increased differential water temperature across the coil,
reduces pumping energy by up to 87%
• Decreased flow and return temperatures reduce standing
losses from pipework
• Low water content and thermal mass of the unit minimises
the response time, avoiding a protracted warm up period
and overshoot
• Integral 4-port valve prevents wasteful natural convection
during mild conditions
(2-port valve option available on request)
• Option of EC motors is available reducing electrical
power consumption by up to 80% compared to a standard
AC motor
3 4
FAN CONVECTORS FAN CONVECTORSH H
Comfort fan convectors are designed and engineered with safety, efficiency and ease of maintenance the key criteria. With
over 30 floor, wall and ceiling models in the range and outputs from 2.6 to 12.7kW and lengths from 695mm to 1495mm,
there’s one to suit every application.
Safety, efficiency and ease of maintenance make
Dunham-Bush fan convectors top of the class in
schools and other educational establishments
AM 25
Super Comfort AM25
AM 31
Series BM Fan ConvectorsDunham-Bush Series BM is available in a versatile range of
8 models, each produced in 9 sizes and 3 hot water coils,
with electric heating available up to 6kW. It is suitable for
floor, wall ceiling and base mounting, concealed within the
building fabric or ceiling void.
Nominal outputs from 2.6 to 19.1kW with casing lengths
from 800 to 1600mm. Nominal outputs are based on LTWH
80/70oC and ambient air temperature of 18oC.
The range of switch options, thermostats, valves, electrical
heating, ESC speed controller and motorised damper options
are shared with the AM section.
A selection of popular spigot plates and air handling options
is available, including: various inlet boxes, manual damper
boxes, motorised damper boxes, circular spigot plates and
boxes, plinths, filters, grilles and extension ducts.
Series CM Fan ConvectorsSeries CM fan convectors are suitable for most applications
where low-level free standing heaters with front discharge
and re-circulation grilles are desirable. Having an overall
height of 600mm, Series CM fan convectors are particularly
suitable for under sill or worktop applications.
The CM range is ideal for replacement of fan convectors
in SCOLA schools and can provide an easy upgrade to
EC motors.
The range consists of two models: SA standard airflow,
bottom front inlet and top front outlet and RA reversed
airflow, bottom front inlet and top front inlet and bottom
front outlet.
Both models are offered in a range of nominal outputs from
2.6 to 12.7kW and casing lengths from 695 to 1495mm.
Nominal outputs are based on LTHW 80/70oC, ambient air
18oC and coil type WA2.
Ceiling Grid Series 600 Fan Convectors Series 600 fan convector heaters provide the ideal solution
where wall space is not available and surface mounted
ceiling units cannot be used. The unit is specifically
designed for integration with ceiling grid applications, such
as in schools, colleges, offices, libraries and commercial
properties. They are elegant in design, but built to the same
robust quality that is typical of all Dunham-Bush products.
Series 600 fan convectors are freely suspended high level
heaters, designed to fit within a 600 x 600mm T bar type
ceiling grid. They provide warm air heating when used with
low or medium temperature hot water.
The standard finish is a white polyester coating to RAL
9010 30% gloss finish, including grilles. Accessories include
remote automatic temperature controls, as well as on/off
and fan speed switches, which can be fitted or remote.
All Series 600 units are supplied with tamper proof
access panels.
Nominal outputs range from 2.94 to 8.81kW with three
casing sizes, 590 x 590 x 250mm, 1190 x 590 x 250mm
and 1790 x 590 x 250mm.
5 6
FAN CONVECTORS FAN CONVECTORS H
Series BM
Series CM
Series 600
Series AM Super Comfort
H
Sentry and Sentinel door curtains provide the perfect
solution to maintaining comfort conditions in commercial
and retail premises where the entrance doors are
permanently open to encourage high levels of pedestrians.
Providing a virtual barrier separating indoor and outdoor
environments, they will reduce heat losses while
conditioning incoming air efficiently.
SentrySentry door curtains can be utilised as either a door
curtain, which elevates the space/room temperature slightly
creating a barrier to help prevent the ingress of cold air
into the building or they can also be used as a door heater,
elevating the air temperature across the doorway.
Sentry door curtains are available in a range of models
suitable for horizontal or vertical mounting. Each model is
available with left or right coil connections and top or back
pipe entry into the casing.
There are four models, CH (cased horizontal), CV (cased
vertical), BH (basic horizontal) and BV (basic vertical) in 3
overall lengths, 1000, 1500 and 2000mm and 3 nominal
outputs 5, 10 and 15kW.
All Sentry door curtains comprise forward curve centrifugal
fans, G2 filter, LPHW or electric heating coil and electrical
connections box.
Models BH and BV have self-finished galvanised steel
casings for installation into a bulkhead. The supply air grille
is fitted with an adjustable telescopic duct for flexibility.
SentinelSentinel door curtains are all cased units for surface fixing
and are fitted with tangential fans, which provide even
distribution of air across the length of the unit.
Sentinel door curtains are available in a range of models for
ambient, LPHW and electric heating. Each model is available
in three sizes: 1000mm, 1500mm and 2000mm, (overall
lengths from 1113 to 2121mm) and nominal outputs of 5kW,
10kW and 15kW.
All Sentinel models are suitable for doorway heights
between 1800 and 2700mm. Each model comprises motor,
tangential fan(s), optional LPHW coil or black bar electric
heating elements and electrical connection box.
• Hydrocourse (Natural Convection) and Aerocourse (Fan
Assisted) systems for both LPHW and MTHW systems
• Even heat distribution along length of heat emitter
• Efficient controllable heat
• Standard and bespoke systems available
• Rigid or roll type floor grilles
• Grille bars in stainless steel anodised aluminium, bespoke
cast iron and wooden grilles are also available
Hydrocourse Natural ConvectionDunham-Bush Hydrocourse trench heating units are
manufactured in 22 standard types and in fixed lengths of
500mm, 1000mm and 1500mm. Telescopic 1000 - 1500mm
lengths and 50 - 1000mm trim lengths are also available.
The system comprises casings formed from black powdered
steel, aluminium finned copper tube elements and rigid or
roll up satin anodised aluminium transverse grilles.
Casings and elements are sized to accommodate single or
double runs of finned element lengths where appropriate,
in progressive ascending output combinations. Return
pipework can be accommodated within the trench casing
when specified.
Aerocourse Fan AssistedFan assisted trench heating units are manufactured in 5
standard lengths of 1250mm, 1750mm, 2250mm, 2750mm
and 3250mm with a range of non active make-up sections
and corner casing for continuous runs of trench heating.
Available with an extensive range of control options, from
a simple single speed on/off, to a comprehensive waterside
modulating BMS control. All units supplied with energy
efficient DC fans.
Casings are available in a range of 8 models to suit outputs
as well as to accommodate flow and return pipework. Four
model types are available, each with an optional 40mm
increase in width incorporating support brackets for flow
and return pipework.
7 8
Dunham-Bush’s innovative trench heating system provides a highly successful, tried and tested solution for offsetting down
draughts on cold surfaces, such as large glazed areas and outside walls. Perfect for a wide variety of commercial buildings,
including high-rise offices, car showrooms, airports and exhibition centres.
TRENCH HEATINGDOOR CURTAINS H HC
Sentry cased horizontal with
access panel removed
Sentinel Door Curtain
Finvector Finvector perimeter heating is tailor made to meet the
heating requirements of modern buildings, particularly those
with significantly exposed exterior walls and large glazed
areas.
Modular in design to ensure ease of installation, Finvector
will reduce heat losses while providing flexible comfort
heating.
Finvector has been applied successfully to heat many
types of buildings, such as office blocks, schools, colleges,
universities, libraries and hospitals.
It is particularly suitable for installation beneath large glass
areas featured in many modern buildings, since it offsets
down draughts and ensures comfortable conditions.
Finvector is also ideally suited for heating large spaces,
subsequently to be divided into smaller units. The design
and construction of the casing is such that the modular
features of the building can be matched, permitting
partitioning to be re-sited at will, without the necessity
to make major alterations to the heating equipment.
Alternatively where the application is non-modular, the
design permits flexibility, and adjustment to the overall
length of casing run is possible, due to the overlap of the
front plate on the make-up plates, end cap and corner
pieces.
The overlap and front plates in relief feature can be used to
emphasise the modular building construction when the tailor
made Finvector equipment is selected to follow the column
and window mullion positions.
• Quiet, powerful operation
• Energy efficient
• Fast simple installation
• Easy access for maintenance
• Extendable condensate pans
• High quality EC fan motor assembly
• Comprehensive range of models to meet most heating
and cooling requirements
• Proven acoustic and thermal performance
Panther280mm deep
Horizontal Waterside Control – Chassis Unit
Panther – high specification 280mm deep horizontal chassis
with waterside controls and EC motors. The Panther range
has been extended and improved over time with all models
now featuring EC external rotor motor or twin shaft motors.
There is a comprehensive range of inlet and discharge
acoustic attenuators for applications where noise is a
critical feature of the building design. This high specification
unit aimed at the premium fan coil unit market, offering
exceptional features and quality, is available in a range of
standard and specially engineered configurations to suit the
most demanding of applications.
Lynx280mm deep
Horizontal Waterside Control – Chassis Unit
Lynx – developed to address the high-end high volume
residential and commercial sector, where energy efficiency
and low noise levels have become a standard requirement.
The Lynx uses the latest EC motors driving all metal fans
and is installed in a 280mm deep horizontal chassis. A wide
range of control options, acoustic attenuators and water
control valves make the Lynx ideal for many applications in
its standard configuration. Quick delivery and availability at
a highly competitive price to suit the market for which it has
been designed, the Lynx is a high quality fan coil unit ideally
suited to today’s market.
FAN COIL UNITS
9 10
PERIMETER HEATING H HCDunham-Bush fan coil units are built in the UK to no-
compromise engineering standards, using only the most
modern and reliable components available. Combined with
the very latest design and manufacturing technology, they
provide the ideal solution to meet precise thermal and noise
criteria.
Style FA Lynx
Panther
Style SA
Style TA
ConciergeHorizontal ceiling void applications with integrated access
door. Waterside controls. Supply air attenuators.
Concierge – cassette type unit with bulkhead discharge
designed specifically for hotel bedrooms and apartments
with built-in acoustic attenuators, metal drop down access
panels and low sound levels as standard. Designed to
minimise the time required for servicing and maintenance,
ideal for hotel guest rooms.
Typical Applications: Offices, hotels and conference centres.
Zone Flow Communicating control system for fan coil units with BMS.
Compatible with both air and waterside control strategy.
Zone flow enables the various components, which make up
the services within a building, to communicate. The system
can range from the simple control of the fans to full building
services control.
Leopard230mm deep
Horizontal Waterside Control – Chassis Unit
Similar in construction to the Panther but contained within
a 230mm deep chassis for use where ceiling void space is
more restricted. Quiet, powerful operation. Long life stainless
steel condensate pans. Adaptable controls box.
Cougar 180mm deep
Slimline Horizontal Waterside Control – Chassis Unit
Cougar – with simple access for maintenance, such as
cleaning or replacing filters.
Both the Cougar and Leopard use a non-handed dual-
purpose coil block covered by a stainless steel ‘V’ formed
condensate pan, terminating with a central drain point at the
lowest end of the tray. This universal design is used on both
RH and LH configurations and allows the complete coil and
condensate pan assembly to be site reversible without the
need for any additional parts or metalwork. The discharge
plenum is supplied with a combination of spigots and
blanking plates that are screw fixed to the plenum for ease
of interchange. The added facility to relocate the controls
box from one side of the unit to the other gives the Cougar
and Leopard the flexibility to accommodate site layout
changes and client fit-outs.
Ocelot248mm deep
Vertical Waterside Control – Cased Unit
These high specification models are available in seven
chassis sizes. The Ocelot fan coil unit has an EC motor,
which can be controlled by an external 0-10V signal or
potentiometer, fitted locally or externally.
11 12
FAN COIL UNITS FAN COIL UNITSH HC C
Leopard
Puma
Ocelot
Concierge
Cougar
Puma235mm deep
Vertical Waterside Control – Chassis Unit
These high specification models are available in seven
chassis sizes. The Puma fan coil unit has an EC motor,
which can be controlled by an external 0-10V signal or
potentiometer, fitted locally or externally.
Whether it’s a car production line, a high-tech warehouse
or a traditional workshop, Dunham-Bush Series UH unit
heaters will provide an effective and efficient method of
space heating. Unit heaters are an ideal product to be
used with biomass installations in agricultural applications,
for example and as a method to utilise excess heat from
Biomass boilers and redistribute the energy for heating or
process requirement within the building.
Easy to install, reliable in operation and eminently
controllable, Dunham-Bush unit heaters are available
with a wide range of accessories to suit many industrial
applications.
• Four casing sizes with hot water and steam coil options
• EC fan motors fully compliant with ErP 2015
• Wide range of accessories, including widespread discharge
and a discharge cone option for vertical applications
• Remote speed potentiometer or analogue input with
optional on/off relay
• Wall/ceiling fixings eliminate need for drop rods
• Suitable for use with biomass boiler systems
• Nominal outputs range from 3.87kW to 108.04kW across
the range
Reflecting over 100 years experience of manufacturing innovative, highly efficient and reliable products for the HVAC
industry, the range includes scroll and centrifugal based models with cooling capacities from 400 to 4000kW to meet every
requirement.
13 14
The range utilises scroll, screw and centrifugal compressor
technology, packaged with direct expansion or flooded
evaporator designs. The chillers can be configured to provide
high efficiencies, low noise and compact overall dimensions
to suit most applications.
• Produced in the UK
• Air and water cooled, screw and centrifugal compressor
models available
• Cooling capacities up to 4000kW
• High efficiencies maintained whatever the load
• Low noise in operation
• Models operating on R134a and R410A refrigerant
• Full microprocessor control with touch screen displays
Zeus ACDS SeriesAir Cooled Scroll Chiller (ACDS)
• 30 models from 35kW to 633kW
• Multiple scroll compressors
• High efficiency plate heat exchanger and high quality robust
design
• Available in modular configuration
• AHRI certified
• Unit operating temperature range -10 to 46oC
Zeus Series, ACDS air cooled scroll chillers feature energy
efficient designs, ease of installation, control flexibility and
high reliability with microprocessor controls. The chillers
feature a robust design contained within a compact footprint.
Delivered to site, fully assembled, charged and tested.
HSERIES UH UNIT HEATERS CHILLERS C
Series UH Unit Heater Zeus ACDS
Achelous AVX-B Series Variable SpeedAir Cooled Vertical Screw Chiller (AVX-B)
• 13 models from 400kW to 1650kW
• Built-in variable frequency drive (VFD) screw compressor
• Multiple compressor models with independent refrigerant
system per compressor
• Shell and tube flooded heat exchanger
• Unit operating temperature range -10oC to 52oC
• AHRI certified performance
The Achelous Series, AVX-B air cooled chiller range features
the new generation Dunham-Bush MSC vertical screw
compressors with built-in variable frequency drive, offering
superior part load energy efficiency. The entire product
line has been designed to provide the greatest amount of
cooling for the least power input over the entire operating
range of your building. The range features energy efficiency,
ease of installation, control flexibility with the Vision 2020i
controller and high reliability ensured through the use of
robust and proven twin screw compressor technology.
PROmetheus DCLC Series-MMagnetic Bearing Variable Speed Centrifugal Chiller
• Dual-stage positive pressure, compact, high efficiency
compressor
• Flooded shell and tube evaporator and condenser
• Advanced microprocessor controller
• 260mm TFT colours touch screen display
• Can be disassembled for restricted access
• Simple operation and maintenance
• AHRI certified up to 2400kW
Typical applications – the DCLC range of chillers is ideal
for offices, hospitals, hotels and retail stores, as well as
industrial applications. The chiller offers a full range of
evaporator/condenser/compressor combinations, enabling
precise matching of the chiller capacity to the system
requirements.
WCFX-V SeriesVariable Speed Water Cooled Screw Chiller
• 20 models from 467kW to 2627kW
• High efficiency twin-screw compressors
• Built-in inverter drive
• Touch screen control panel
• Compact design
• Can be disassembled for restricted access
• Excellent full and part load efficiency
• AHRI certified performance
Dunham-Bush Series WCFX-V variable speed water cooled
rotary screw flooded chillers are backed by more than
45 years experience. The WCFX-V is our premium water
cooled chiller for commercial and industrial applications,
where installers, consultants and building owners require
maximum quality, reliability and optimum performance at
all levels of load.
Helios ACHX-B SeriesAir Cooled Horizontal Screw Chiller
Energy efficient, compact design, high quality
• 14 Models with cooling capacities form 299 to 1090kW
• Independent refrigerant circuits on single and twin
compressor configuration
• Economiser cycle fitted as standard to maximise energy
efficiency
• Robust screw compressor design capable of operating over
a wide range of conditions
• Stepless unloading via slide valve arrangement to ensure
optimum performance at all levels of load
• Flooded type shell and tube evaporator as standard to
ensure excellent full and part load efficiency
• Full microprocessor control as standard
• V Coil configuration resulting in compact dimensions
The ACHX-B range of chillers is available in 14 models,
each equipped with one or two Dunham-Bush horizontal
screw compressors. The units have been designed with
compact overall dimensions and with excellent energy
efficiency and low noise levels. Designed for operation in
ambient conditions up to 46oC, the Helios range of chillers
addresses an important sector of the air cooled chiller
market in Europe.
15 16
C CCHILLERS CHILLERS
Achelous AVX-B WCFX-V PROmetheus DCLC Helios ACHX-B
In addition to the popular range of chillers above, Dunham-Bush offer centrifugal water cooled chillers up to
14000kW, air cooled heat pumps up to 2000kW, precision computer room air conditioners, water and air cooled
rooftop units, packaged units and a complete range of air handling units.
Dunham-Bush LtdDownley Road, Havant, Hampshire PO9 2JDTel: 023 9247 7700Fax: 023 9245 3601Email: [email protected]
Dunham-Bush reserves the right to change any specification without notice. 000 – 000 -020 – A . Oct 2016
FN00659Made in GB
P R O D U C T S T H A T P E R F O R M F R O M P E O P L E W H O C A R E
Service Support
Dunham-Bush offers a range of services from
installation and commissioning to aftercare and routine
maintenance to suit all your needs. Our Service Team
has a wide range of experience and knowledge of all
refrigeration equipment, which includes split A/C VRV
or VRF air and water cooled chillers and heat pumps.
Continued support and regular maintenance will help
prevent any down time of your equipment. All our
engineers are fully trained and hold current Skill Cards
and F-Gas qualifications.
Button 3: Button 4: Button 24: Button 5: Button 23: Button 6: Button 22: Button 7: Button 21: Button 8: Button 20: Button 9: Button 19: Button 10: Button 18: Button 11: Button 16: Button 12: Button 14: Button 15: