Upload
trandan
View
257
Download
0
Embed Size (px)
Citation preview
Commercial Body Fittings – 8th Edition
Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]
260 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]
TOOLBOXES – PLASTIC
Part No. Length(mm)
Height(mm)
Depth(mm) Fixings
Recommended Load Weight
(Standard Fitment)*
Wgt.(kg)
CABX45 450 380 400 Integral 50kg 5.00
CABX52 520 360 360 Integral 50kg 5.00
CABX58 580 400 450 Integral 50kg 7.00
CABX62A 620 360 400 Integral 50kg 6.00
CABX62 620 360 610 see page 261 75kg 8.00
CABX65 650 500 480 see page 261 75kg 9.00
CABX80A 800 500 360 Integral 75kg 9.00
CABX80 800 500 480 see page 261 75kg 11.00
CABX100 1000 500 480 see page 261 75kg 14.00
CABX120 1200 500 480 see page 261 75kg 16.00
ToolboxesPlastic
CABX RANGE
l CABX45, 52, 58, 62A & 80A have integral fixing for fitment directly to the floor of the vehicle
(see dimension chart below)l CABX62, 65, 80, 100 & 120 are better fitted using our support bracketry which ensures heavy loads do not cause damage to the boxl Other colours available to special order (subject to minimum order quantity)l Single handle 3-point locking mechanisml Handle dust coverl All logos are laser engraved as standardl Fully recyclable, chemical resistant, UV stabilised PEl May be incorporated in the sideguard in accordance
with Regulation 73l For fitting kits see page 261
No. CABX/JBXLOCK Replacement Handle Setwgt. 0.22kg
l Suits all Jonesco CABX plastic toolboxesl Supplied with dust coverl Other spares available upon request CABX62A
Ø9.5 B C
A
Integral Fixings
Integral Fixing Dimensions
Part No. A(mm)
B(mm)
C(mm)
CABX45 400 120 230
CABX52 470 120 190
CABX58 530 120 265
CABX62A 570 120 230
CABX80A 740 120 205
CABX45
*Additional load may be carried if a support base shelf is added and the bracketry is reinforced accordingly
All Jonesco plastic toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of UTAC.
A monogramming serviceis available
(Subject to minimum order quantity)
261
Commercial Body Fittings – 8th Edition
Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]
TOOLBOXES – PLASTIC TOOLBOXES – PLASTIC
Part No. Length(mm)
Height(mm)
Depth(mm)
Fixings / Mounting
Kit
No. of Handles
Wgt.(kg)
CABJBZ600 600 450 480 Integral 1 6.50
CABJBZ700 700 480 490 see below 2 8.00
CABJBZ900 900 480 490 see below 2 10.50
ToolboxesPlastic
TIGA-BOX RANGEAll Jonesco plastic toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of UTAC.
l Lid sits in a recess to minimize the potential for water ingressl Additional protection through automotive grade rubber seall Lockable with 2 key operated locks as standardl Handles flip up into horizontal position and allow for easy unlocking even with gloves onl Handles flip down into a safety recess preventing them from rotating openl Lid opens 180⁰l No protruding partsl Other colours available to special order (subject to minimum order quantity)l Handles with integrated dust coverl All logos are laser engraved as standardl Fully recyclable, chemical resistant, UV stabilised PEl May be incorporated in the sideguard in accordance with Regulation 73l Passed UTAC side-impact test
Toolbox Part No.
NormalLoads
ExcessiveLoads
CABX62 CABX/KIT26 CABX/KIT27
CABX65 CABX/KIT22 CABX/KIT23
CABX80 CABX/KIT20 CABX/KIT21
CABX100 ------------------- CABX/KIT25
CABX120 ------------------- CABX/KIT29
CABJBZ700 ------------------- CABX/KIT35
CABJBZ900 ------------------- CABX/KIT36
CABX/JBH67 CABX/KIT53 -------------------
CABX/JBL67 CABX/KIT53 -------------------
Toolbox Fixing KitsHeavy-Duty 25 x 5mm Flat Black Painted Steel Brackets
l Complete with nut and bolt attachment kit
A monogramming serviceis available
(Subject to minimum order quantity)
Commercial Body Fittings – 8th Edition
Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]
262 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]
TOOLBOXES – PLASTICToolboxes
PlasticCABV RANGE
Document HolderPlastic
All Daken plastic toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of TUV Rheinland.
l All toolboxes supplied with patented Europlex locking ‘T’ handles. Complete with key cover
l Injection moulded polypropylenel Fully sealedl Extremely robust and securel Optional mounting/fitting kits availablel Gas springs available to aid operationl Supplied with up to 3 locking handles, subject to width
No. CAB1005 Black plastic / Screw on capwgt. 0.54kg Size: L320 x 0125mm
l 2 x 08mm pre-threaded holesl Other colours available to orderl Complete with rubber seal & chain
Part No. Length(mm)
Height(mm)
Depth(mm)
No. of Handles
Mounting Kit to Suit
Wgt.(kg)
CABV81000/410BP 410 330 340 1 88010 4.0
CABV81002/500BP 500 350 400 1 88010 6.0
CABV81004/600BP 600 400 500 2 88030 9.0
CABV81006/800BP 800 500 500 2 88030 12.0
CABV81008/1000BP 1000 500 500 3 88030 14.0
Mounting Kits
Part No. To suit
CABV88010/PR 8100081002
CABV88030/PR810048100681008
No. CABV9945/BP Replacement Plastic Europlex handlewgt. 0.28kg
l Suits all CABV plastic toolboxesl Supplied with key coverl Steel version available upon request
Mounting kit
263
Commercial Body Fittings – 8th Edition
Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]
TOOLBOXES – PLASTIC TOOLBOXES – PLASTIC / ALUMINIUMStorage Boxes
PlasticCABX RANGE
No. CABX/JBH67 Hinged Lid
No. CABX/JBL67 Detachable Lid
l Supplied with safety lock & 2 keys
No. CABX/JBC40
l Supplied with compartment lock and 2 keys
No. CABX/JBC40T
l Supplied with latchlock that can be locked with a padlock
CABX/JBL67
CABX/JBH67
CABX/JBC40
l Fully sealed enclosurel Robust design/corrosion resistantl 2mm aluminium l ’D’ section seall Stainless steel ‘T’ locking handlesl Interior base mat supplied with all boxes
Part No. Length(mm)
Height(mm)
Depth(mm) Lid Mounting
KitWgt.(kg)
CABX/JBH67 670 305 230 Hinged CABX/KIT53 4.0
CABX/JBL67 670 305 230 Detachable CABX/KIT53 4.0
CABX/JBC40 400 275 330 Hinged --------------- 4.0
CABX/JBC40T 400 275 330 Hinged --------------- 4.0
Part No. Length(mm)
Height(mm)
Depth(mm)
No. of Handles
Wgt.(kg)
CABA450/ACP 450 480 490 1 11.00
CABA600/ACP 600 480 490 1 13.00
CABA800/ACP 800 480 490 1 16.00
CABA1000/ACP 1000 480 490 2 19.00
ToolboxesAluminium Chequer Plate
CABA RANGEManufactured from 2mm aluminium chequer plate, press-formed and welded.
All CABX range storage boxes are manufactured from fully recyclable moulded polyethylene (PE).
Commercial Body Fittings – 8th Edition
Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]
264 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]
TOOLBOXES – STEELToolboxes
SteelCABV25 RANGE
ToolboxesStainless Steel
CABV35 RANGE
l Fully sealed enclosurel Robust design / Robotically formed
and weldedl 1.5mm steel zinc plated/black powder
coatedl Patented Europlex ‘T’ locking handlesl Gas strut kits available
No. CABV9941/BP Replacement Plastic Europlex handlewgt. 0.28kg
l Suits all CABV25 steel toolboxes
l Fully sealed enclosurel Robust design / Robotically formed and
weldedl 1.5mm 304G stainless steell Stainless steel ‘T’ locking handlesl Gas strut kits available l Fully buffed to a matt surface finish
Mounting kit
Mounting kit
Part No. Length(mm)
Height(mm)
Depth(mm)
No. of Handles
Mounting Kit
Wgt.(kg)
CABV2515/500BS 500 350 400 1 CABV9515/PR 12.21
CABV2520/600BS 600 400 500 1 CABV9515/PR 15.21
CABV2525/800BS 800 500 500 2 CABV9520/PR 24.35
CABV2530/1000BS 1000 500 500 2 CABV9520/PR 30.90
CABV2535/1200BS 1200 500 500 2 CABV9520/PR 34.00
CABV2540/1450BS 1450 500 500 2 CABV9520/PR 40.81
Mounting KitsBlack Powder Coated Steel (pair)
Part No. Material Thickness
SizeW x H(mm)
CABV9515/PR 3mm 420 x 160
CABV9520/PR 4mm 520 x 205
CABV9941/BP
Part No. Length(mm)
Height(mm)
Depth(mm)
No. of Handles
Mounting Kit
Wgt.(kg)
CABV3515/500SS 500 350 400 1 CABV9525/PR 12.21
CABV3520/600SS 600 400 500 1 CABV9525/PR 15.21
CABV3525/800SS 800 500 500 2 CABV9530/PR 24.35
CABV3530/1000SS 1000 500 500 2 CABV9530/PR 30.90
CABV3535/1200SS 1200 500 500 2 CABV9530/PR 34.00
CABV3540/1450SS 1450 500 500 2 CABV9530/PR 40.81
Mounting KitsBlack Powder Coated Steel (pair)
Part No. Material Thickness
SizeW x H(mm)
CABV9525/PR 2.5mm 420 x 160
CABV9530/PR 2.5mm 520 x 205
All Bawer CABV25 toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of TUV SUD.
All Bawer CABV35 toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of TUV SUD.