COMMERCIAL FINNED TUBE RADIATION TRADE PRICES

COMMERCIAL FINNED TUBE RADIATION

TRADE PRICESSTYLES: S, F, FT, T, E, X, XC, AR, PM, SS, LB2, LCS-10 & GUARDIAN

INDEXITEM PAGE

Elements .......................................................................................................................... 2-3Rough-in MaterialsBrackets, Hangers and Backplate ................................................................................... 3Versa-Line S, T, F, FT, RD, PM, SS, E, X, XC ........................................................................ 4-10LCS-10 ............................................................................................................................ 11 LB-2 ................................................................................................................................. 11Classic Wiped Edge, Slip Jointed, Louvered Inlet, Slope Top and Pedestal Mounted ...... 12-20Dura-Vane II ..................................................................................................................... 21-22Guardian ........................................................................................................................... 23Standard Enclosure Modifications, Louvered Inlet, Draft Barrier ..................................... 24Pipe Enclosures ............................................................................................................... 25Typical Enclosure Layouts ............................................................................................... 26-27Ordering Procedures ....................................................................................................... 28Terms of Sale.................................................................................................................... 29Warranty .......................................................................................................................... 30

PRICE SHEET: C33EFFECTIVE: 8/1/21SUPERSEDES: C32R

260 North Elm St., Westfield, MA 01085 Tel: (413) 564-5535 Fax: (413) 564-5661www.sterlingheat.com

2

ELEMENTSCOPPER-ALUMINUM & STEEL ELEMENTS USED WITH JVK, LB-2 & LCS-10 ENCLOSURESR01 thru R05 Elements furnished in 3', 4', 5', 6', 7' & 8', lengths only — Consult factory for cost of special lengths.R06 thru R10 Elements furnished in 3' to 12'6" in 1" increments.R11 thru R16 Elements furnished in 3' to 12' lengths in 1" increments.

Shorter lengths available Add 9% List per ft.

SEE CATALOG FOR GUARANTEED WORKING

PRESSURES.

LIST PRICE/FT.CATALOGNUMBER WT.FINS PER FOOT

FIN GAUGE

FIN SIZEHEIGHT x WIDTH

0.80.80.80.80.81.11.51.01.41.64.64.95.04.85.55.7

3/4" Cu.3/4" Cu.1" Cu.

3/4" Cu.1" Cu.1" Cu.1" Cu.

1-1/4" Cu.1-1/4" Cu.1-1/4" Cu.

1" IPS1" IPS

1-1/4" IPS1-1/4" IPS

1" IPS1-1/4" IPS

.011

.010

.011

.0135

.0135

.020

.020

.020

.020

.020

.024

.024

.024

.024

.024

.024

50605550504050504050404040405050

2-1/2" x 2-1/4" Alum.2-1/2" x 2-3/4" Alum.2-1/2" x 2-3/4" Alum.3-3/4" x 2-3/4" Alum.3-3/4" x 2-3/4" Alum.5" x 2-3/4" Alum.5" x 2-3/4" Alum.3-3/4" x 2-3/4" Alum.5" x 2-3/4" Alum.5" x 2-3/4" Alum.3-3/4" x 2-3/4" Steel5" x 2-3/4" Steel5" x 2-3/4" Steel3-3/4" x 2-3/4" Steel5" x 2-3/4" Steel5" x 2-3/4" Steel

$ 10.2012.00 15.05 15.05 17.45 28.80 32.40 31.85 32.40 36.60 34.25 36.65 36.65 34.25 41.60 42.20

TUBE SIZER01R02R03R04R05R06R07R08R09R10R11R12R13R14R15R16

STANDARD COMMERCIAL COPPER-ALUMINUM ELEMENTSStandard elements shown available in lengths of from 3'0" to 12'6" in 1" increments. (3/4" cu elements 8'0" max. length.)

TUBE SIZESHIP. WT.LBS./FT.

LISTPRICE/FT.

FINSPER FT.

CATALOGNUMBERC3/4-33C3/4-34C3/4-35C3/4-43C3/4-44C3/4-45C3/4-433C3/4-434C3/4-435C33C34C35C43C44C45C433C434C435C133C134C135C143C144C145C1433C1434C1435

3/4" Cu.""""""""

1" Cu.""""""""

1-1/4" Cu.""""""""

3-1/4" x 3-1/4" Alum.""

4-1/4" x 4-1/4" Alum.""

3-5/8" x 4-1/4" Alum.""

3-1/4" x 3-1/4" Alum.""

4-1/4" x 4-1/4" Alum.""

3-5/8" x 4-1/4" Alum.""

3-1/4" x 3-1/4" Alum.""

4-1/4" x 4-1/4" Alum.""

3-5/8" x 4-1/4" Alum.""

324050324050324050324050324050324050324050 324050324050

$ 17.4519.85 22.20 23.45 26.40 30.60 21.00 24.00 27.65 19.85 22.20 24.00 25.20 28.80 33.00 23.45 26.40 29.40 23.45 25.20 27.65 28.80 31.85 36.00 26.40 29.40 33.00

1.11.11.31.51.61.71.31.62.01.31.51.61.71.82.01.31.61.91.41.51.81.82.02.51.61.82.0

FIN GAUGE .020"HEIGHT x WIDTH

Note: List add will be 12% of total list price of materials for tagging individual cartons with room numbers, floor, building, etc.

3

ELEMENTS

Price Brackets & Ball Bearing Hangers as follows: 2-with 2' thru 6' lengths, 3-with 7', 7'6" & 8' lengths hgrs for 20" & 24" 2 tier, or as noted.Partial Backplate — 4' and 8' lengths only.∆ Standard brackets with bracket mounted hangers are typically used for steam jobs requiring pitch adjustment. Stand-Offs are to be used with 24" WTRBRKT & BRKT’s with 30" & 36" enclosures.

*Cradle 1, 2, or 3A included in bracket and ball bearing hanger price.

For SS, ARLI, DVLI, LB2, LCS10, & Guardian, please

see individual product pages for backplate. See

PM product pages for pedestal brackets.

K = 3-9/16" Enclosure depthA = 4-3/8" Enclosure depthB = 5-5/16" Enclosure depth

7 = 7" height8 = 8" height

11 = 11" height 14 = 14" height20 = 20" height24 = 24" height

STANDARD COMMERCIAL STEEL ELEMENTS

Elements manufactured in lengths of from 3'0" to 12'6" in 1" increments

Shorter lengths available – add 9% List per ft.

Note: List add will be 12% of total list price of materials for tagging individual cartons with room numbers, floor, building, etc.

BACKPLATE & BRACKETS

CATALOGNUMBER PIPE SIZE FIN SIZE

HEIGHT x WIDTHFINS

PER FT.LIST

PRICE/FT.SHIP. WT.LBS./FT.

S33-024 1" IPS 3 1/4" X 3 1/4" Steel 32 $ 26.85 4.2S33-032 " " 32 28.75 4.8S34-024 " " 40 29.10 4.8S34-032 " " 40 31.40 5.5S35-024 " " 50 33.60 5.5S35-032 " " 50 35.85 6.5S43-024 " 4 1/4" x 4 1/4" Steel 32 32.40 5.9S43-032 " " 32 35.25 6.9S44-024 " " 40 36.95 6.9S44-032 " " 40 39.65 8.2S45-024 " " 50 42.65 9.1S45-032 " " 50 45.35 9.8S133-024 1 1/4" IPS 3 1/4" X 3 1/4" Steel 32 26.85 4.6S133-032 " " 32 28.75 5.2S134-024 " " 40 29.10 5.2S134-032 " " 40 31.40 5.9S135-024 " " 50 33.60 5.9S135-032 " " 50 35.85 6.9S143-024 " 4 1/4" x 4 1/4" Steel 32 32.40 6.3S143-032 " " 32 35.25 7.3S144-024 " " 40 36.95 7.3S144-032 " " 40 39.65 8.6S145-024 " " 50 42.65 8.5S145-032 " " 50 45.35 10.2S242-024 2" IPS " 25 35.90 6.5S242-032 " " 25 37.80 7.4S243-024 " " 32 37.55 7.4S243-032 " " 32 40.20 8.4S244-024 " " 40 41.05 8.4S244-032 " " 40 44.60 9.7

OTHER ROUGH-INCATALOG NUMBER DESCRIPTION LIST PRICE WT.PBP Partial Backplate - 8' Lengths $3.45 /FT 0.4B-610 Mounting Strip - 8' Lengths 3.65 /FT 0.4WTRBRKT-A7 Water Bracket w/Stand-Off "A" 7" 9.75 /EA 0.4WTRBRKT-B7 Water Bracket w/Stand-Off "B" 7" 9.75 0.4WTRBRKT-K8 Water Bracket "K" 8" 7.90 0.4WTRBRKT-K11 Water Bracket "K" 11" 8.50 0.5WTRBRKT-K14 Water Bracket "K" 14" 8.65 0.7WTRBRKT-A11 Water Bracket "A" 11" 8.65 0.6WTRBRKT-A14 Water Bracket "A" 14" 10.85 0.7WTRBRKT-A20 Water Bracket "A" 20" 11.00 0.9WTRBRKT-A24 Water Bracket "A" 24" 11.80 1.0WTRBRKT-B14 Water Bracket "B" 14" 10.85 0.8WTRBRKT-B20 Water Bracket "B" 20" 11.00 0.9WTRBRKT-B24 Water Bracket "B" 24" 11.80 1.0

▼ SO-30P Stand off/gauging tool 30" for PBP "B" 30" 3.10 0.2▼ SO-30F Stand off 30" for FBP "B" 30" 1.75 0.2▼ SO-36P Stand off/gauging tool 36" for PBP "B" 36" 3.35 0.3▼ SO-36F Stand off 36" for FBP "B" 36" 2.05 0.3

BRKT-K8 Steam Bracket "K" 8" 7.80 0.14BRKT-K11 Steam Bracket "K" 11" 7.90 0.22BRKT-K14 Steam Bracket "K" 14" 8.20 0.25

▲ BRKT-A11 Steam Bracket "A" 11" 7.90 0.5▲ BRKT-A14 Steam Bracket "A" 14" 8.20 0.6▲ BRKT-A20 Steam Bracket "A" 20" 9.55 0.8▲ BRKT-A24 Steam Bracket "A" 24" 10.60 0.9▲ BRKT-B14 Steam Bracket "B" 14" 8.20 0.7▲ BRKT-B20 Steam Bracket "B" 20" 9.55 0.8▲ BRKT-B24 Steam Bracket "B" 24" 10.60 0.9▲ BB Hgr-BRKT A Ball Bearing Hgr - Bracket MTD. "A" 6.25 0.4▲ BB Hgr-BRKT B Ball Bearing Hgr - Bracket MTD. "B" 6.25 0.5

BB Hgr - WALL K Ball Bearing Hgr - Wall MTD. "K" 6.25 0.4BB Hgr - WALL A Ball Bearing Hgr - Wall MTD. "A" 6.25 0.4BB Hgr - WALL B Ball Bearing Hgr - Wall MTD. "B" 6.25 0.4RPH-K Roll Pipe Hgr "K" 6.40 0.2RPH-A Roll Pipe Hgr "A" 6.40 0.3RPH-B Roll Pipe Hgr "B" 6.40 0.4* CR6A Cradle 6A 3.25 0.1* CR10 Cradle 10 3.25 0.1JV-UGFAC Urethane Gasket - Factory Installed $3.15 /FT 0.1JV-UGFLD Urethane Gasket - Field Installed $2.40 /FT 0.1TUP Spray Can Touch-Up Paint (1 Can) 22.75 /EA 1.0

FULL BACKPLATES LIST PRICE SHIP WT.

LBS/FTCATALOG NUMBER HEIGHT UNPAINTED GALV BAKED POWDER CRSLIST PRICE/FT LIST PRICE/FT

FBP-7 7" $9.55 $ 10.85 0.9FBP-8 8" 9.70 10.90 1.0FBP-11 11" 9.95 11.40 1.4FBP-14 14" 10.95 13.05 2.1FBP-20 20" 13.15 15.95 2.8FBP-24 24" 14.35 17.25 3.4FBP-30 30" 17.05 17.60 4.3FBP-36 36" 19.70 20.40 4.9

4

STANDARD ENCLOSURE LENGTHS2' thru 8' in 6" increments

S - Slope T - Top Outlet ENCLOSURE LISTINGS

(Depth) K=3-9/16"

Note: Enclosure prices do not include brackets, hangers or backplateSLOPE TOP ENCLOSURES FLAT TOP ENCLOSURES

JV = Versa-Line with Slip Joint — StandardD = Damper TPD = Tamper Resistant Damper

† Damper for JVK-S & T8 only available with R01, R02 & R03 element.

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc.For special colors consult factory

▲RD ONLY AVAILABLE IN 16 GA.

Available in Stainless Steel and Aluminum. Consult Factory.

SEE PAGE 2 & 3 FOR ROUGH-IN MATERIAL PRICESLIST PRICE SHOWN

SLIMLINE VERSA-LINE ENCLOSURES AND ACCESSORIES

Door Sizes for Accessories With Doors

JVK-S8 .................6 W x 5 H JVK-T8 .................6 W x 5 H JVK-S11................6 W x 5 H JVK-T11 ...............6 W x 5 H JVK-S14 ...............6 W x 5 H JVK-T14 ...............6 W x 9 H

DESCRIPTIONJVK-S8

JVK-S11

JVK-S14

PRICE WT. PRICE WT. PRICE WT.

Enclosure 18 GA. $ 14.65/FT 2.5 $ 16.80/FT 2.8 $ 17.50/FT 3.6 Enclosure 16 GA. ▲ 16.05 2.8 18.40 3.1 19.80 4.2 Enclosure 14 GA. 19.35 3.7 21.35 4.0 22.20 5.0 Baked Powder (standard colors) 2.75 - 3.05 - 3.40 -Baked Metallic (standard colors) 4.10 - 4.45 - 5.10 -Knob Damper † 7.85 0.3 7.85 0.3 7.85 0.3 Tamper Resistant Damper † 11.00 0.3 11.00 0.3 11.00 0.3 3" End Cap 23.15/EA 1.1 25.10/EA 1.4 27.20/EA 2.0 8-3/8" End Cap w/Access Door 64.60 2.5 75.20 2.8 88.90 3.5 4" Wall Sleeve 13.30 1.0 17.15 1.2 17.85 1.5 6" Wall Sleeve 16.05 1.3 18.10 1.6 18.65 2.3 8-3/8" Wall Sleeve 18.40 1.9 20.50 2.2 20.85 3.0 8-3/8" Wall Sleeve w/Access Door 35.60 2.0 36.20 2.3 36.80 3.0 Wall Sleeve Support 7.10 0.2 7.35 0.2 8.80 0.3 Inside Corner 90° 48.65 4.5 58.20 4.9 63.30 6.5 Inside Corner 135° 69.60 4.5 80.15 4.9 92.65 6.5 Outside Corner 90° 57.15 4.6 70.20 5.5 82.70 7.0 Outside Corner 135° 80.15 4.6 92.65 5.5 105.45 7.0 12" Valve Compartment 18 GA. 55.25 2.5 63.35 2.8 66.45 3.6 12" Valve Compartment 16 GA. 57.40 2.8 65.60 3.1 70.90 4.2 12" Valve Compartment 14 GA. 60.35 3.7 66.80 4.0 70.90 5.0

JVK-T, RD8

JVK-T, RD11

JVK-T, RD14

PRICE WT. PRICE WT. PRICE WT.- - -

$ 16.80/FT 4.0 $ 18.65/FT 4.4 $ 19.75/FT 5.0 19.55 5.5 22.50 5.9 25.10 6.5

2.90 - 3.40 - 4.00 -4.30 - 5.10 - 5.85 -7.85 0.3 7.85 0.3 7.85 0.3

11.00 0.3 11.00 0.3 11.00 0.3 19.75/EA 1.5 24.50/EA 1.9 27.20/EA 2.3 63.85 2.9 77.60 3.2 91.20 3.5 12.00 0.8 17.15 1.0 17.85 1.3 14.65 1.5 17.85 1.8 18.10 2.1 15.65 2.2 19.90 2.7 20.50 3.0 32.15 2.4 32.80 2.7 35.00 3.0

9.70 0.2 10.10 0.3 10.40 0.4 52.85 4.8 58.40 5.4 63.30 6.5 65.60 4.8 80.20 5.4 92.65 6.5 59.00 5.6 70.25 6.6 82.70 8.0 80.15 5.6 92.65 6.6 101.60 8.0

0.00 0.00 0.0064.40 4.0 71.35 4.4 75.80 5.0 66.95 5.5 71.75 5.9 85.15 6.5

5

S - Slope T - Top OutletF - FrontFT - Front & Top


VERSA-LINE ENCLOSURES AND ACCESSORIES

SEE PAGE 2 & 3 FOR ROUGH-IN MATERIAL PRICES

SLOPE TOP ENCLOSURESNote: Enclosure prices do not include brackets, hangers or backplate

JV = Versa-Line with Slip Joint — StandardD = DamperTPD = Tamper Resistant Damper

ENCLOSURE LISTINGS (Depth) A=4-3/8"

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc.For special colors consult factoryNo small order charge on “S” style.All valve compartments require minimum one bracketAvailable in Stainless Steel and Aluminum. Consult Factory.

Can only use 3-1/4" wide element or smaller.

LIST PRICE SHOWN

FLAT TOP ENCLOSURESNote: Enclosure prices do not include brackets,

hangers or backplate

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc.For special colors consult factoryAll valve compartments require minimum one bracket



DESCRIPTIONJVA-S11

JVA-S14

PRICE WT. PRICE WT.

Enclosure 18 GA. $ 16.80/FT 2.8 $ 17.05/FT 3.6Enclosure 16 GA. 18.00 3.1 18.85 4.2Enclosure 14 GA. 20.80 4.0 21.60 5.0Baked Powder (standard colors) 3.95 - 4.40 -Baked Metallic (standard colors) 5.80 - 6.15 -Knob Damper 7.85 0.3 7.85 0.3Tamper Resistant Damper 11.00 0.3 11.00 0.33" End Cap 26.55/EA 1.4 27.85/EA 2.08-3/8" End Cap w/Access Door 52.20 2.5 53.85 3.24" Wall Sleeve 18.40 1.2 18.65 1.56" Wall Sleeve 19.75 1.6 19.90 2.38-3/8" Wall Sleeve 22.35 2.2 22.55 3.08-3/8 Wall Sleeve w/Access Door 41.80 2.3 42.00 3.0Wall Sleeve Support 8.55 0.2 9.95 0.3Inside Corner 90° 65.60 4.9 66.05 6.5Inside Corner 135° 88.75 5.0 89.50 6.7Outside Corner 90° 72.30 5.4 73.05 7.0Outside Corner 135° 92.55 6.2 100.95 7.812" Valve Compartment 18 GA. 61.30 3.4 63.25 4.212" Valve Compartment 16 GA. 64.50 3.8 66.50 4.912" Valve Compartment 14 GA. 68.35 4.5 70.15 5.6

DESCRIPTIONJVA-F, T, FT, RD

14 PRICE WT.

Enclosure 16 GA ▲ $ 19.05/FT 5.0Enclosure 14 GA 24.35 6.5Baked Powder (standard colors) 4.15 -Baked Metallic (standard colors) 6.20 -Knob Damper 7.85 0.3Tamper Resistant Damper 11.00 0.33" End Cap 26.55/EA 2.38-3/8" End Cap w/Access Door 54.35 3.74" Wall Sleeve 18.30 1.36" Wall Sleeve 20.30 2.18-3/8" Wall Sleeve 22.70 3.08-3/8" Wall Sleeve w/Access Door 42.70 3.0Wall Sleeve Support 10.35 0.5Inside Corner 90° 75.05 6.5Inside Corner 135° 89.55 6.8Outside Corner 90° 83.50 7.2Outside Corner 135° 100.95 8.012" Valve Compartment 16 GA 80.35 5.712" Valve Compartment 14 GA 84.60 7.2

6






ENCLOSURE LISTINGS (Depth) B=5-5/16"


Use only with 4-1/4" wide elements.

LIST PRICE SHOWN


Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc.For special colors consult factoryAll valve compartments require minimum one bracketAvailable in Stainless Steel and Aluminum. Consult Factory.

Use only with 4-1/4" wide elements.

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc.For special colors consult factoryAll valve compartments require minimum one bracket.Available in Stainless Steel and Aluminum. Consult Factory.

DESCRIPTION JVB-S14 JVB-S20PRICE WT. PRICE WT.

Enclosure 18 GA. $ 17.55/FT 3.6 $ 20.65/FT 4.3Enclosure 16 GA. 19.50 4.2 23.15 5.2Enclosure 14 GA. 22.60 5.0 27.70 5.4Baked Powder (standard colors) 4.45 - 4.55 -Baked Metallic (standard colors) 6.65 - 6.85 -Knob Damper 7.85 0.3 7.85 0.3Tamper Resistant Damper 11.00 0.3 11.00 0.33" End Cap 28.85/EA 2.0 33.70/EA 2.68-3/8" End Cap w/Access Door 56.00 3.2 64.10 4.34" Wall Sleeve 20.60 1.5 24.50 1.96" Wall Sleeve 20.80 2.3 26.35 2.78-3/8" Wall Sleeve 23.45 3.0 28.75 3.38-3/8 Wall Sleeve w/Access Door 42.90 3.0 47.25 3.3Wall Sleeve Support 10.25 0.3 11.95 0.4Inside Corner 90° 69.20 6.5 81.45 7.4Inside Corner 135° 91.40 6.7 104.35 7.8Outside Corner 90° 86.95 7.0 107.15 8.0Outside Corner 135° 104.90 7.8 124.80 8.612" Valve Compartment 18 GA. 68.50 4.2 80.90 5.512" Valve Compartment 16 GA. 70.00 4.9 82.45 6.212" Valve Compartment 14 GA. 74.60 5.6 84.80 6.5

DESCRIPTION JVB-S24 JVB-S30 JVB-S36PRICE WT. PRICE WT. PRICE WT.

Enclosure 18 GA. $ 25.80/FT 5.6 - - - -Enclosure 16 GA. 29.85 6.7 $ 52.95/FT 7.4 $ 57.20/FT 8.6Enclosure 14 GA. 35.15 8.0 58.60 9.1 63.70 10.4Baked Powder (standard colors) 4.75 - 4.90 - 5.30 -Baked Metallic (standard colors) 7.00 - 7.45 - 7.85 -Knob Damper 7.85 0.3 7.85 0.3 7.85 0.3Tamper Resistant Damper 11.00 0.3 11.00 0.3 11.00 0.33" End Cap 40.40/EA 3.6 43.50/EA 4.5 52.85/EA 5.48-3/8" End Cap w/Access Door 73.65 5.5 82.55 7.4 86.50 8.84" Wall Sleeve 28.75 2.0 33.60 2.5 34.65 2.86" Wall Sleeve 30.75 3.0 36.85 3.6 38.55 4.08-3/8" Wall Sleeve 33.50 4.2 42.45 4.8 45.05 5.58-3/8 Wall Sleeve w/Access Door 56.00 4.5 65.20 4.8 68.10 5.5Wall Sleeve Support 13.45 0.5 22.35 0.7 22.75 0.9Inside Corner 90° 109.80 8.0 153.35 8.9 165.35 9.8Inside Corner 135° 125.85 8.7 143.40 9.8 153.90 10.9Outside Corner 90° 129.25 9.3 153.35 10.3 165.35 11.3Outside Corner 135° 143.90 9.9 143.40 10.7 153.90 13.612" Valve Compartment 18 GA. 87.15 6.2 - - - -12" Valve Compartment 16 GA. 89.05 7.3 112.00 7.8 116.05 8.612" Valve Compartment 14 GA. 94.55 8.6 117.90 9.1 122.90 10.4

7







FLAT TOP ENCLOSURESNote: Enclosure prices do not include brackets, hangers or backplate

500’ & over$00.00

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc.For special colors consult factoryAll valve compartments require minimum one bracket



LIST PRICE SHOWN

DESCRIPTIONJVB-F, T, FT, RD

14JVB-F, T, FT, RD

20JVB-F, T, FT, RD

24JVB-F, FT, RD

30JVB-F, FT, RD

36PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT.

Enclosure 16 GA ▲ $ 19.80/FT 5.0 $ 23.45/FT 6.5 $ 32.55/FT 7.4 $ 53.50/FT 8.0 $ 57.95/FT 10.0Enclosure 14 GA 25.30 6.5 30.45 7.7 41.60 9.1 59.45 10.6 64.70 11.9Baked Powder (standard colors) 4.40 - 4.50 - 4.75 - 5.00 - 5.30 -Baked Metallic (standard colors) 6.60 - 6.80 - 7.20 - 7.45 - 7.85 -Knob Damper 7.85 0.3 7.85 0.3 7.85 0.3 7.85 0.3 7.85 0.3Tamper Resistant Damper 11.00 0.3 11.00 0.3 11.00 0.3 11.00 0.3 11.00 0.33" End Cap 27.70/EA 2.3 33.70/EA 2.8 40.40/EA 3.6 43.75/EA 4.8 45.90/EA 5.48-3/8" End Cap w/Access Door 59.35 3.7 66.65 4.7 74.85 5.5 75.75 7.9 79.10 9.04" Wall Sleeve 19.00 1.3 23.30 1.8 27.25 2.0 31.70 2.3 32.55 2.76" Wall Sleeve 20.85 2.1 25.80 2.5 30.05 3.0 35.20 3.5 36.50 4.08-3/8" Wall Sleeve 23.45 3.0 29.95 3.5 34.15 4.2 40.45 4.9 42.75 5.68-3/8" Wall Sleeve w/Access Door 44.45 3.0 52.70 3.9 58.70 4.5 62.95 4.9 65.45 5.6Wall Sleeve Support 10.85 0.5 12.55 0.4 15.00 0.5 21.60 0.8 24.95 1.0Inside Corner 90° 79.30 6.5 89.95 7.0 115.25 8.0 146.75 16.0 158.30 18.2Inside Corner 135° 93.45 6.8 104.35 7.5 125.85 8.7 136.15 12.3 146.15 14.1Outside Corner 90° 86.95 7.2 107.15 8.0 129.25 9.3 124.95 15.9 136.70 18.2Outside Corner 135° 104.90 8.0 124.80 8.5 143.90 9.9 114.60 12.3 125.00 14.112" Valve Compartment 16 GA 83.50 5.7 99.95 7.1 108.45 7.9 109.35 7.6 113.15 8.812" Valve Compartment 14 GA 86.95 7.2 105.25 8.3 111.20 9.6 116.60 9.6 121.05 11.0

8

STANDARD ENCLOSURE LENGTHS 2' thru 8' in 6" increments

PM ENCLOSURES AND ACCESSORIES


STYLE “PM” PEDESTAL MOUNT ASSEMBLY

Note: Enclosure prices do not include brackets

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc.

Recommended Bracket Quantity: 2' thru 4' = 2 Brackets 4'6" thru 8' = 3 Brackets


ENCLOSURE LISTINGS (Depth) B-PM=6-1/16" B-2PM=10-5/16"

PM — 1 ROW FREE STANDING ENCLOSURE 6-3/4" HIGH2 PM — 2 ROW FREE STANDING ENCLOSURE 6-3/4" HIGH

JV = Versa-Line with Slip Joint — Standard

DESCRIPTION JVB-PM JVB-2PMPRICE WT. PRICE WT.

Enclosure 16 GA. (Standard) $ 21.60/FT 3.9 $ 29.95/FT 5.0Enclosure 14 GA. 26.85 4.9 35.45 6.2Baked Powder (standard colors) 3.40 - 3.95 -Baked Metallic (standard colors) 5.10 - 5.80 -Support Brkt. Assembly (Maximum 3' on Center) 34.45/EA 2.0 52.35/EA 2.4Cradle #6A (For Use With Return Pipe - See Catalog) 3.25 0.1 6.45 0.2Cradle #10 (For Use With Return Pipe - See Catalog) 3.25 0.1 6.45 0.23" End Cap Flush Mount "FM" (LH or RH) 34.90 2.0 39.05 2.83" End Cap Overlap "OL" 34.90 2.0 39.05 2.44" Wall Sleeve 15.10 2.0 17.10 2.56" Wall Sleeve 17.05 2.5 19.55 3.08-3/8" Wall Sleeve 19.40 3.5 22.15 3.88-3/8" Wall Sleeve w/Access Door 40.70 3.5 44.10 3.8Wall Sleeve Support 17.05 0.8 19.50 1.4Inside Corner or Outside Corner 90° 81.85 7.5 100.95 11.5Inside Corner or Outside Corner 135° 104.35 7.8 119.20 11.8

9

SS 19 — DOUBLE SLOPE TOP ENCLOSURE 19-1/2" HIGHSS 25 — DOUBLE SLOPE TOP ENCLOSURE 25-1/2" HIGHSS 29 — DOUBLE SLOPE TOP ENCLOSURE 29-1/2" HIGH

STANDARD ENCLOSURE LENGTHS 2' thru 8' in 6" increments

SS ENCLOSURES AND ACCESSORIES


STYLE “SS” DOUBLE SLOPE TOP ASSEMBLYNote: Enclosure prices do not include brackets, hangers or backplate



ENCLOSURE LISTINGS (Depth) B=5-5/16" H

JV = Versa-Line with Slip Joint — Standard

DESCRIPTION JVB-SS19 JVB-SS25 JVB-SS29PRICE WT. PRICE WT. PRICE WT.

Enclosure (18 GA. CRS) $ 36.40/FT 4.3 $ 45.50/FT 5.3 $ 50.70/FT 5.9Enclosures (16 GA. CRS) 39.75 5.6 48.05 6.3 54.35 7.7Enclosures (14 GA. CRS) 43.20 7.0 52.70 7.9 59.55 9.6Baked Powder (standard colors) 4.50 - 4.55 - 5.80 -Baked Metallic (standard colors) 7.30 - 7.70 - 7.90 -Knob Damper 7.85 0.3 7.85 0.3 7.85 0.4Tamper Resistant Damper 11.00 0.3 11.00 0.3 11.00 0.4Backplate 20 GA. Galvannealed (Full Height) Unpainted 13.30 2.7 16.45 3.4 19.40 3.9Backplate 20 GA. CRS (Full Height) Baked Powder 15.80 2.7 19.55 3.4 23.20 3.9Vertical Wall Bracket 6.15/EA 0.5 6.50/EA 0.6 7.10/EA 0.7Bracket Mounted Ball Bearing Hanger 6.25 0.5 6.25 0.5 6.25 0.53" End Cap 44.80 3.0 51.95 3.7 56.40 4.29" End Cap w/Access Door 77.45 5.6 85.65 6.6 92.25 7.34" Wall Sleeve 27.00 1.4 31.95 1.8 36.20 2.09" Wall Sleeve 33.85 3.0 39.05 3.6 42.80 4.29" Wall Sleeve w/Access Door 54.40 4.3 63.15 4.9 66.10 5.5Wall Sleeve Support 19.40 1.5 21.35 1.9 23.25 2.3Inside Corner 90° 100.25 6.8 116.00 8.0 135.55 8.8Inside Corner 135° 120.70 7.0 136.85 8.2 157.50 10.0Outside Corner 90° 112.65 8.8 142.70 11.2 154.65 12.8Outside Corner 135° 133.00 9.0 163.00 11.4 175.70 13.0

10

E - Flat Top EnclosureX - Expanded Metal EnclosureXC - Ceiling Expanded Metal Enclosure




FLAT TOP ENCLOSURES Note: Enclosure prices do not include brackets, hangers or backplate

ENCLOSURE LISTINGS (Depth) A=4-3/8" B=5-5/16"

FLAT TOP ENCLOSURES Note: Enclosure prices do not include brackets, hangers or backplate

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc.For special colors consult factoryAvailable in Stainless Steel and Aluminum. Consult Factory.

LIST PRICE SHOWN

DESCRIPTION JVA-E5 JVA-E11PRICE WT. PRICE WT.

Enclosure 18 GA. $13.75/FT 2.5 $19.05/FT 3.7 Enclosure 16 GA. 15.10 2.8 20.60 4.0 Enclosure 14 GA. 18.50 3.2 25.10 4.4 Baked Powder (standard colors) 2.75 - 3.95 -Baked Metallic (standard colors) 4.10 - 5.80 -Partial Backplate - 8' Lengths 3.45 0.4 3.45 0.4 Water Brackets 6.60/EA 0.3 7.60/EA 0.3 Wall Mounted B.B. HangerCeiling HangerPipe & Cover SupportRigid Element Hanger3" End Cap 18.95 1.0 21.00 1.5 8-3/8" Wall Sleeve 14.75 1.2 17.15 1.7 Wall Sleeve Support 8.80 0.2 9.95 0.3 Inside Corner 90° 45.10 3.4 53.40 5.0 Inside Corner 135° 69.75 3.7 79.50 6.4 Outside Corner 90° 41.65 3.7 48.80 6.4 Outside Corner 135° 66.10 4.0 77.10 6.9 3" Splice Plate

DESCRIPTION JVB-E6 JVB-E12PRICE WT. PRICE WT.

Enclosure 18 GA. $15.00/FT 2.5 $19.75/FT 3.7Enclosure 16 GA. 16.20 2.8 21.00 4.0Enclosure 14 GA. 19.90 3.2 25.75 4.4Baked Powder (standard colors) 2.90 - 4.00 -Baked Metallic (standard colors) 4.30 - 5.85 -Partial Backplate - 8' Lengths 3.45 0.4 3.45 0.4Water Brackets 6.70/EA 0.3 6.70/EA 0.3Wall Mounted B.B. HangerCeiling HangerPipe & Cover SupportRigid Element Hanger3" End Cap 19.90 1.0 22.70 1.58-3/8" Wall Sleeve 15.15 1.2 17.55 1.7Wall Sleeve Support 8.85 0.2 10.05 0.3Inside Corner 90° 46.65 3.4 55.60 5.0Inside Corner 135° 73.25 3.7 83.70 6.4Outside Corner 90° 44.40 3.7 50.15 6.4Outside Corner 135° 67.95 4.0 79.05 6.93" Splice Plate

VA-X5 VA-X11 VA-X17PRICE WT. PRICE WT. PRICE WT.

$12.95/FT 0.9 $19.80/FT 1.1 $25.30/FT 1.3

2.75 - 3.95 - 5.85 -4.10 - 5.80 - 8.80 -

6.25/EA 0.4 6.25/EA 0.4 6.25/EA 0.4

7.10 0.3 7.10 0.3 7.10 0.3 4.00 0.3 4.00 0.3 4.00 0.3

12.95 0.5 17.95 0.8 19.50 1.0

26.25 0.9 28.80 1.3 32.80 1.9

27.85 1.0 31.55 1.5 34.30 2.0

5.80 0.5 6.25 0.5 6.70 0.8

VB-X6 VB-X12 VB-X18PRICE WT. PRICE WT. PRICE WT.

$13.30/FT 0.9 $20.35/FT 1.1 $26.00/FT 1.3

2.90 - 4.00 - 6.15 -4.30 - 5.85 - 9.15 -

6.25/EA 0.4 6.25/EA 0.4 6.25/EA 0.4

7.25 0.3 7.25 0.3 7.25 0.34.05 0.3 4.05 0.3 4.05 0.3

13.30 0.5 18.50 0.8 20.30 1.0

28.40 0.9 31.70 1.3 33.85 1.9

28.70 1.0 32.35 1.5 35.45 2.0

6.25 0.3 6.45 0.5 6.90 0.8

VA-X3CPRICE WT.

$23.80/FT 1.0

3.05 -4.45 -

7.10/EA 0.3

17.50 2.3

VB-X4CPRICE WT.

$24.65/FT 1.0

3.15 -4.60 -

7.10/EA 0.3

18.40 2.5

11

Note: List add will be 12% of total list price of materials to be tagged for tagging individual cartons with room numbers, floor, building, etc.

Note: List add will be 12% of total list price of materials to be tagged for tagging individual cartons with room numbers, floor, building, etc.

LCS-10 ENCLOSURES AND ACCESSORIESLCS-10 ENCLOSURES AND BACKPLATES AVAILABLE IN LENGTHS

2' thru 8' in 6" increments

B-610 MOUNTING STRIP SUPPLIED IN 8' LENGTHS SEE PAGE 2 FORELEMENT PRICES

LCS-10 ENCLOSURES LCS-10 ACCESSORIES

LB2 ENCLOSURES AND BACKPLATES AVAILABLE IN THE FOLLOWING LENGTHS


SEE PAGE 2 FORELEMENT PRICES

LB-2 ACCESSORIES

LB-2 ENCLOSURES AND ACCESSORIES



DESCRIPTIONPRICE WT.

Enclosure 18 GA. $ 12.40/FT 2.1 Enclosure 16 GA. 14.35 2.4 Baked Powder (standard colors) 2.40 –Baked Metallic (standard colors) 3.50 –B-610 Mounting Strip - 8' Lengths Only 3.65 1.5 Full Backplate 9.10 1.4 Bracket 7.25/EA 0.4 Adjustable Rod Hanger Upper with Clutch Nut 6.25 0.1 Adjustable Rod Hanger Lower with Clutch Nut 6.25 0.1 Slide Shoe – For R01, R02, R03 Element Only 2.05 0.1 8" Wall Sleeve w/Access Door, Return to Wall 24.10 1.0


3" End Cap $ 13.95/EA 0.7 6" End Cap 17.50 0.8 6" End Cap w/Access Door 22.15 0.8 2" Splice Piece 8.20 0.2 3" Wall Sleeve 10.10 0.3 6" Wall Sleeve 11.00 0.6 14" Fill-In Section 19.50 1.2 Inside Corner 90° 12.85 0.3 Inside Corner 135° 56.00 0.3 Outside Corner 90° 25.60 0.9 Outside Corner 135° 65.15 0.9 8" Valve Compartment - Overlapping 24.00 1.0


2" End Cap $ 17.50/EA 0.66" End Cap to floor 19.55 1.26" End Cap to floor w/Access Door 25.80 1.24" Wall Sleeve 10.15 0.96" Wall Sleeve 11.30 1.18-3/8" Wall Sleeve 12.95 1.38-3/8" Wall Sleeve w/Access Door 18.65 1.3Wall Sleeve Support 8.80 0.4Inside Corner 90° 25.20 0.9Inside Corner 135° 65.00 1.3Outside Corner 90° 26.85 1.3Outside Corner 135° 65.75 1.7

LB-2 ENCLOSURES

LIST PRICE SHOWN

LIST PRICE SHOWN


Enclosure 18 gauge (Does not include backplate or hgrs.) $ 12.55/FT 2.0Enclosure 16 gauge (Does not include backplate or hgrs.) 13.60 2.5Enclosure 14 gauge (Does not include backplate or hgrs.) 16.00 3.0Add for standard modulating damper 5.85 0.3Add for tamper resistant modulating damper 7.65 0.3Full Backplate 20 gauge 8.85 1.4Partial Backplate - 8' Lengths 3.45 1.5Baked Powder (Standard Colors) 3.65 -Baked Metallic (Standard Colors) 4.75 -Adjustable Hanger w/Clutch Nut (For Element or Return Pipe) 6.25/EA 0.1Standard Rod Hanger 3.95 0.1Intermediate Bottom Support w/Ball Bearings 6.50 0.2Intermediate Bottom Support 3.10 0.2Optional Gauging Tool (For Locating Bottom Support) 3.70 0.3

PRICE$ 12.40/FT

14.352.403.503.659.107.25/EA6.256.252.05

24.10

12


ENCLOSURE LISTINGS (Depth) K=3-9/16" A=4-3/8" B=5-5/16"

J = Slip JointedD = Dial Damper TPD =Tamper Resistant Damper SD = Slide Damper (“B” only)

“J” CLASSIC ENCLOSURES AND ACCESSORIES

“J” STYLE CLASSIC ENCLOSURESNote: Enclosure prices do not include brackets, hangers or backplate

Standard product is clear anodized grille with enclosure fronts baked powder finish in any of standard colors shown in Mestek Color Selector.Grille and enclosure painted same color at no extra charge. No deduction is allowed for prime coat.Extruded aluminum grille furnished in standard baked powder for two tone effect add $3.25 List per ft.

AR - Architectural

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc. All accessories overlap the enclosures.



DESCRIPTION JVK-AR11 JVA-AR7 JVA-AR14 JVB-AR7 JVB-AR14 JVB-AR20 JVB-AR24

PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT.Enclosure 16 GA. $36.30 3.6 $35.55 3.0 $41.45 4.5 $37.05 3.1 $42.60 4.5 $45.50 6.1 $50.80 7.5Enclosure 14 GA. 40.70 4.8 39.10 3.7 46.00 5.7 40.70 3.8 47.25 5.7 50.70 7.5 56.40 8.6Baked Metallic (standard colors) 1.60 - 1.50 - 2.15 - 1.50 - 2.15 - 2.30 - 2.70 -Dial Damper 8.50 0.5 - - 8.50 0.5 - - 8.50 0.5 8.50 0.5 8.50 0.5Tamper Resistant Damper 11.80 0.5 - - 11.80 0.5 - - 11.80 0.5 11.80 0.5 11.80 0.5Slide Damper (B offset only) - - - - - - 13.95 0.4 13.95 0.4 13.95 0.4 13.95 0.44" End Cap 26.60 2.2 26.25 1.7 30.50 2.8 27.40 1.8 31.80 2.8 35.55 3.9 38.20 4.58-3/8" End Cap w/Access Door 55.45 3.5 51.40 2.9 57.15 4.0 53.15 3.0 58.70 4.0 63.15 5.1 66.10 5.74" Wall Sleeve 17.85 1.5 15.20 1.2 18.65 2.0 16.05 1.3 19.05 2.0 23.40 2.3 25.40 2.96" Wall Sleeve 20.35 1.8 17.15 1.8 21.00 2.3 18.50 1.9 21.70 2.3 25.80 2.9 28.80 3.48-3/8" Wall Sleeve 22.85 2.4 18.45 2.2 23.80 2.9 20.15 2.3 24.50 2.9 28.80 3.5 32.50 4.08-3/8" Wall Sleeve w/Access Door 43.35 2.6 39.35 2.8 46.85 3.1 41.00 2.5 47.25 3.1 52.20 3.8 56.65 4.2Wall Sleeve Support 8.50 0.4 7.90 0.3 8.20 0.5 8.55 0.3 8.50 0.5 9.70 0.6 10.70 0.7Inside Corner 90° 64.50 4.9 63.30 4.0 75.25 6.5 64.95 4.1 77.60 6.5 95.75 6.9 110.20 8.4Inside Corner 135° 83.00 5.5 83.20 4.4 96.30 7.0 85.50 4.5 98.30 7.0 116.10 7.5 134.00 9.0Outside Corner 90° 61.45 5.5 57.60 5.0 71.25 7.0 59.25 5.1 73.35 7.0 85.55 7.5 105.65 9.0Outside Corner 135° 82.95 6.0 83.25 5.4 90.60 7.5 86.45 5.5 93.30 7.5 105.80 8.0 134.40 9.512" Valve Compartment 16 GA. 69.20 4.1 70.55 3.7 71.95 5.1 74.05 3.7 75.10 5.1 88.55 6.7 98.15 8.112" Valve Compartment 14 GA. 72.40 5.4 73.70 4.5 75.05 6.3 78.80 4.4 76.90 6.3 95.30 8.1 104.05 9.218" Valve Compartment 16 GA. 116.30 6.1 74.85 5.6 121.90 7.6 78.10 5.6 125.45 7.6 141.50 10.0 157.35 12.118" Valve Compartment 14 GA. 122.85 8.1 79.60 6.6 128.75 9.4 82.80 6.6 132.60 9.4 148.85 12.1 163.20 12.8

/FT

/EA

/FT

/EA

/FT

/EA

/FT

/EA

/FT

/EA

/FT

/EA

/FT

/EA

13

V= Wiped EdgeD = Dial Damper SD = Slide Damper (“B” only)TPD = Tamper Resistant Damper

ENCLOSURE LISTINGS (Depth) K=3-9/16" A=4-3/8" B=5-5/16"

AR - Architectural


STANDARD CLASSIC ENCLOSURESNote: Enclosure prices do not include brackets, hangers or backplate

Standard product is clear anodized grille with enclosure fronts baked powder finish in any of standard colors shown in Mestek Color Selector.Grille and enclosure painted same color at no extra charge. No deduction is allowed for prime coat.Extruded aluminum grille furnished in standard baked powder for two tone effect add $3.25 List per ft.

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc. All accessories underlap the enclosures.

Available in Aluminum. Consult Factory.


STANDARD CLASSIC ENCLOSURES AND ACCESSORIES

DESCRIPTION VK-AR11 VA-AR7 VA-AR14 VB-AR7 VB-AR14 VB-AR20 VB-AR24

PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT.Enclosure 16 GA. $37.40 3.5 $36.40 3.0 $42.55 4.5 $38.05 3.1 $43.55 4.5 $46.15 6.1 $52.45 7.5Enclosure 14 GA. 41.65 4.8 40.10 3.7 46.90 5.9 41.75 3.8 48.50 5.9 51.30 7.5 58.20 8.6Baked Metallic (standard colors) 1.60 - 1.50 - 2.15 - 1.50 - 2.15 - 2.30 - 2.70 -Dial Damper 8.50 0.5 - - 8.50 0.5 - - 8.50 0.5 8.50 0.5 8.50 0.5Tamper Resistant Damper 11.80 0.5 - - 11.80 0.5 - - 11.80 0.5 11.80 0.5 11.80 0.5Slide Damper (B offset only) - - - - - - 13.95 0.4 13.95 0.4 13.95 0.4 13.95 0.44" End Cap (VK = 3" End Cap) 21.35 1.5 26.25 1.7 27.85 2.8 27.40 1.8 30.05 2.8 34.40 3.9 37.65 4.58-3/8" End Cap w/Access Door 52.85 3.4 54.10 2.9 63.15 4.0 56.15 3.0 64.95 4.0 70.90 5.1 76.45 5.72" Wall Sleeve 19.20 1.0 16.90 0.3 21.15 1.5 17.25 0.7 22.35 1.6 23.45 1.9 26.10 2.14" Wall Sleeve 20.50 1.5 18.85 1.2 22.70 2.0 19.55 1.3 23.25 2.0 25.75 2.3 29.25 2.96" Wall Sleeve 22.70 1.8 22.25 1.8 26.75 2.3 23.40 1.9 27.00 2.3 29.05 2.9 31.25 3.48-3/8" Wall Sleeve 25.60 2.4 23.40 2.2 27.70 2.9 25.10 2.3 28.45 2.9 31.55 3.5 36.00 4.08-3/8 "Wall Sleeve w/Access Door 48.65 2.5 46.05 2.8 58.65 3.0 47.70 2.9 59.85 3.0 64.95 3.6 71.25 4.1Inside Corner 90° 66.05 4.9 63.30 4.0 75.70 6.5 64.95 4.1 79.25 6.5 92.25 6.9 109.80 8.4Inside Corner 135° 81.80 5.5 86.90 4.4 92.25 7.0 89.40 4.5 94.90 7.0 110.55 7.5 129.50 9.0Outside Corner 90° 63.15 5.5 57.60 5.0 71.25 7.0 59.25 5.1 73.35 7.0 83.15 7.5 100.40 9.3Outside Corner 135° 82.95 6.0 80.80 5.4 89.10 7.5 83.85 5.5 91.90 7.5 107.60 8.0 130.35 9.512" Valve Compartment 16 GA. 76.45 4.2 70.55 3.0 71.95 4.5 74.05 3.1 75.10 4.5 88.55 6.1 98.15 7.512" Valve Compartment 14 GA. 82.20 5.4 73.70 3.7 75.05 5.9 78.80 3.8 76.90 5.9 95.30 7.5 104.05 8.618" Valve Compartment 16 GA. 116.30 6.0 74.85 4.5 121.90 7.3 78.10 4.6 125.45 7.3 141.50 9.0 157.35 11.018" Valve Compartment 14 GA. 122.85 6.6 79.60 6.4 128.75 8.9 82.80 5.0 132.60 8.9 148.85 10.5 165.85 12.5

/FT

/EA

/FT

/EA

/FT

/EA

/FT

/EA

/FT

/EA

/FT

/EA

/FT

/EA

14

“J” CLASSIC LOUVERED INLET TO THE FLOOR ENCLOSURES AND ACCESSORIES

J = Slip JointedSD = Slide Damper (“B” only)

SEE PAGE 2 & 3 FORROUGH-IN MATERIAL PRICES

AR - Architectural

LIST PRICE SHOWNSTANDARD ENCLOSURE LENGTHS



“J” STYLE CLASSIC LOUVERED INLET TO THE FLOORNote: Enclosure prices do not include brackets, hangers, backplate, or floor angle.

Standard product is clear anodized grille with enclosure fronts baked powder finish in any standard colors shown in Mestek Color Selector.Grille and enclosure painted same color at no extra charge.No deduction is allowed for prime coat.Extruded aluminum grille furnished in standard baked powder for two tone effect add $3.25 List per ft.

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc. All accessories overlap the enclosure.


DESCRIPTION JVA-AR10LI JVB-AR10LIPRICE WT. PRICE WT.

Enclosure 16 GA. $ 37.50/FT 3.5 $ 38.65/FT 3.7Enclosure 14 GA. 40.85 4.3 42.30 4.5Baked Metallic (standard colors) 1.70 - 1.70 -Slide Damper (B offset only) - - 13.30 0.44" End Cap 27.25/EA 2.2 28.45/EA 2.28-3/8" End Cap w/Access Door 53.35 3.3 54.60 3.54" Wall Sleeve 16.10 1.6 17.35 1.86" Wall Sleeve 18.10 2.2 19.50 2.48-3/8" Wall Sleeve 22.30 2.6 23.25 2.88-3/8" Wall Sleeve w/Access Door 41.75 2.8 42.20 3.0Wall Sleeve Support 8.35 0.6 8.65 0.8Inside Corner 90° 65.40 4.4 67.95 4.5Inside Corner 135° 82.55 4.8 85.00 5.0Outside Corner 90° 61.85 5.4 64.50 5.5Outside Corner 135° 79.10 5.8 85.85 6.018" Valve Compartment 16 GA. 77.30 5.0 78.15 5.218" Valve Compartment 14 GA. 80.85 5.3 82.55 5.5

CATALOG NUMBER DESCRIPTION PRICE WT.FBP-10 10" Full Backplate - Unpainted Galv $ 9.95/FT 1.2FBP-10 10" Full Backplate - Painted CRS 11.40 1.2EAFA Extruded Aluminum Floor Angle - 8' lengths - Unpainted 7.60 0.3EAFA Extruded Aluminum Floor Angle - 8' lengths - Baked Powder (Standard Colors) 10.00 0.3EAFA Extruded Aluminum Floor Angle - 8' lengths - Baked Metallic (Standard Colors) 13.35 0.3

BACKPLATE AND FLOOR ANGLE

15

STANDARD CLASSIC LOUVERED INLET TO THE FLOOR ENCLOSURES AND ACCESSORIESAR - Architectural V=Wiped Edge

SD = Slide Damper (“B” only)

SEE PAGE 2 & 3 FORROUGH-IN MATERIAL PRICESLIST PRICE SHOWN



STANDARD CLASSIC LOUVERED INLET TO THE FLOORNote: Enclosure prices do not include brackets, hangers, backplate, or floor angle.


Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc. All accessories underlap the enclosure.


DESCRIPTION VA-AR10LI VB-AR10LIPRICE WT. PRICE WT.

Enclosure 16 GA. $ 41.20 3.5 $ 42.55 3.7Enclosure 14 GA. 45.25 4.3 46.60 4.5Baked Metallic (standard colors) 1.80 - 1.80 -Slide Damper (B offset only) - - 13.95 0.44" End Cap 27.80 2.2 28.90 2.28-3/8" End Cap w/Access Door 55.20 3.3 57.00 3.54" Wall Sleeve 20.50 1.6 21.35 1.86" Wall Sleeve 21.35 2.2 24.15 2.48-3/8" Wall Sleeve 25.90 2.6 26.75 2.88-3/8" Wall Sleeve w/Access Door 48.80 2.8 50.60 3.0Inside Corner 90° 66.85 4.4 69.60 4.5Inside Corner 135° 84.90 4.8 88.50 5.0Outside Corner 90° 66.85 5.4 67.75 5.5Outside Corner 135° 84.90 5.8 86.70 6.018" Valve Compartment 16 GA. 79.20 5.0 80.85 5.218" Valve Compartment 14 GA. 82.05 5.3 88.05 5.5

/FT

/EA

/FT

/EA

CATALOG NUMBER DESCRIPTION PRICE WT.FBP-10 10" Full Backplate - Unpainted Galv $ 9.95/FT 1.2FBP-10 10" Full Backplate - Painted CRS 11.40 1.2EAFA Extruded Aluminum Floor Angle - 8' lengths - Unpainted 7.60 0.3EAFA Extruded Aluminum Floor Angle - 8' lengths - Baked Powder (Standard Colors) 10.00 0.3EAFA Extruded Aluminum Floor Angle - 8' lengths - Baked Metallic (Standard Colors) 13.35 0.3


16

“J” CLASSIC SLOPE TOPENCLOSURES AND ACCESSORIESARS - Architectural Slope J =Slip Jointed



ENCLOSURE LISTINGS (Depth) A=4-3/8"

“J” STYLE CLASSIC SLOPE TOP ENCLOSURESNote: Enclosure prices do not include brackets, hangers or backplate




DESCRIPTION JVA-ARS11 JVA-ARS14PRICE WT. PRICE WT.

Enclosure 16 GA. $ 39.50 4.3 $ 41.45 4.3Enclosure 14 GA. 43.75 5.5 46.00 5.5Baked Metallic (standard colors) 2.05 - 2.20 -Knob Damper - - - -3" End Cap 26.55 1.4 27.85 2.08-3/8" End Cap w/Access Door 52.20 2.5 53.85 3.24" Wall Sleeve 18.40 1.2 18.65 1.56" Wall Sleeve 19.75 1.6 19.90 2.38-3/8" Wall Sleeve 22.35 2.2 22.55 3.08-3/8" Wall Sleeve w/Access Door 41.80 2.3 42.00 3.0Wall Sleeve Support 8.55 2.0 9.95 0.3Inside Corner 90° 65.60 4.9 66.05 6.5Inside Corner 135° 88.75 5.0 89.50 6.7Outside Corner 90° 72.30 5.4 73.05 7.0Outside Corner 135° 92.55 6.2 100.95 7.812" Valve Compartment 16 GA. 67.05 3.8 71.95 4.912" Valve Compartment 14 GA. 70.90 4.5 75.05 5.6

/FT

/EA

/FT

/EA

17

“J” CLASSIC SLOPE TOPENCLOSURES AND ACCESSORIESARS - Architectural Slope J =Slip Jointed




“J” STYLE CLASSIC SLOPE TOP ENCLOSURESNote: Enclosure prices do not include brackets, hangers or backplate




DESCRIPTION JVB-ARS14 JVB-ARS20 JVB-ARS24 JVB-ARS30 JVB-ARS36

PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT.Enclosure 16 GA. $ 42.60 4.3 $ 45.50 5.9 $ 50.80 7.3 $ 63.65 8.9 $ 69.35 10.5Enclosure 14 GA. 47.25 5.5 54.80 7.3 56.40 8.4 69.80 10.2 76.30 12.0Baked Metallic (standard colors) 2.40 - 2.50 - 2.55 - 2.70 - 2.80 -Knob Damper - - - - - - - - - -3" End Cap 28.85 2.0 33.70 2.6 40.40 3.6 43.50 4.5 52.85 5.48-3/8" End Cap w/Access Door 56.00 3.2 64.10 4.3 73.65 5.5 82.55 7.4 86.50 8.84" Wall Sleeve 20.60 1.5 24.50 1.9 28.75 2.0 33.60 2.5 34.65 2.86" Wall Sleeve 20.80 2.3 26.35 2.7 30.75 3.0 36.85 3.6 38.55 4.08-3/8" Wall Sleeve 23.45 3.0 28.75 3.3 33.50 4.2 42.45 4.8 45.05 5.58-3/8" Wall Sleeve w/Access Door 42.90 3.0 47.25 3.3 56.00 4.5 65.20 4.8 68.10 5.5Wall Sleeve Support 10.25 0.3 11.95 0.4 13.45 0.5 22.35 0.7 22.75 0.9Inside Corner 90° 69.20 6.5 81.45 7.4 109.85 8.0 153.35 9.1 165.35 10.1Inside Corner 135° 91.40 6.7 104.35 7.8 125.85 8.7 143.40 9.8 153.90 10.9Outside Corner 90° 86.95 7.0 107.15 8.0 129.25 9.3 153.35 10.3 165.35 11.3Outside Corner 135° 104.90 7.8 124.80 8.6 143.90 9.9 143.40 11.0 153.90 12.112" Valve Compartment 16 GA. 75.10 4.9 88.55 6.2 98.15 7.3 112.00 9.2 116.05 10.812" Valve Compartment 14 GA. 76.90 5.6 95.30 6.5 104.05 8.6 117.90 10.5 122.90 12.4

/FT /FT /FT /FT /FT

/EA /EA /EA /EA /EA

18


AR - Architectural

“J” PEDESTAL MOUNT ASSEMBLY OVERLAPPING ACCESSORIES

J = Slip JointedOverlapping AccessoriesSD = Slide Damper (“B” only)


ENCLOSURE LISTINGS (Depth)

B-ARPM=6-1/16"B-AR2PM=10-5/16"

Standard product is clear anodized grille with enclosure painted baked powder finish colors from standard color chart.Grille and enclosure painted same color at no extra charge. No deduction is allowed for prime coat.Extruded aluminum grille with different color finish for two tone effect, add $3.25 List per ft.

“J” CLASSIC “ARPM” ENCLOSURES AND ACCESSORIES

LIST PRICE SHOWN

Note: List add will be 12% of total list price of materials that are to have individual carton information like floor number, room number, etc. shown.


ARPM — 1 ROW FREE STANDING ENCLOSURE 6-3/4" HIGHAR2PM — 2 ROW FREE STANDING ENCLOSURE 6-3/4" HIGH

DESCRIPTION JVB-ARPM JVB-AR2PMPRICE WT. PRICE WT.

Enclosure 16 GA. $48.80 5.0 $67.90 6.0Enclosure 14 GA. 64.10 6.3 72.05 7.3Baked Metallic (standard colors) 1.85 - 2.05 -Support Bracket Assembly (Maximum 3' on center) 32.55/EA 2.0 52.35/EA 2.4Cradle #6A (For Use With Return Pipe - See Catalog) 3.25 0.1 6.50 0.2Cradle #10 (For Use With Return Pipe - See Catalog) 3.25 0.1 6.50 0.23" End Cap 42.75 2.0 106.35 3.04" Wall Sleeve 24.35 1.9 59.50 2.86" Wall Sleeve 25.40 2.5 64.95 3.08-3/8" Wall Sleeve 26.75 3.0 68.20 3.58-3/8" Wall Sleeve w/Access Door 80.35 3.3 - -Wall Sleeve Support 17.05 0.8 19.55 1.4Inside Corner or Outside Corner 90° 162.55 8.0 233.70 12.0Inside Corner or Outside Corner 135° 189.30 9.3 281.70 13.0Slide Damper 13.95 0.4 CONSULT FACTORY

/FT /FT

19

AR - Architectural

PEDESTAL MOUNT ASSEMBLY UNDERLAPPING ACCESSORIES

V = Wiped EdgeSD = Slide Damper (“B” only)

UNDERLAPPING ACCESSORIES



Standard product is clear anodized grille with enclosure fronts baked powder finish in any of the standard colors shown on Mestek Color Selector.Grille and enclosure painted same color at no extra charge. No deduction is allowed for prime coat.Extruded aluminum grille furnished in standard baked powder for two tone effect, add $3.25 List per ft.

CLASSIC “ARPM” ENCLOSURES AND ACCESSORIES

LIST PRICE SHOWN

Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc. All accessories underlap the enclosures.


ARPM — 1 ROW FREE STANDING ENCLOSURE 6-3/4" HIGHAR2PM — 2 ROW FREE STANDING ENCLOSURE 6-3/4" HIGH

ENCLOSURE LISTINGS (Depth) B-ARPM=6-1/16" B-AR2PM=10-5/16"

DESCRIPTION VB-ARPM VB-AR2PMPRICE WT. PRICE WT.

Enclosure 16 GA. $ 46.95 5.0 $ 65.50 6.0Enclosure 14 GA. 61.75 6.3 69.30 7.3Baked Metallic (standard colors) 1.85 - 2.05 -Support Bracket Assembly (Maximum 3' on center) 32.55/EA 2.0 52.35/EA 2.4Cradle #6A (For Use With Return Pipe - See Catalog) 3.25 0.1 6.45 0.2Cradle #10 (For Use With Return Pipe - See Catalog) 3.25 0.1 6.45 0.23" End Cap 41.40 2.0 102.50 3.04" Wall Sleeve 23.30 1.9 57.35 2.86" Wall Sleeve 24.45 2.5 62.45 3.08-3/8" Wall Sleeve 25.80 3.0 65.65 3.58-3/8" Wall Sleeve w/Access Door 77.45 3.3 - -Wall Sleeve Support 17.05 0.8 19.55 1.4Inside Corner or Outside Corner 90° 156.65 8.0 225.25 12.0Inside Corner or Outside Corner 135° 183.70 9.3 271.25 13.0Slide Damper 13.95 0.4 CONSULT FACTORY

/FT /FT

20

“J” CLASSIC DOUBLE SLOPE TOP ENCLOSURES AND ACCESSORIES

J = Slip Jointed

SEE PAGE 2 & 3 FORROUGH-IN MATERIAL PRICES

ARSS - Architectural Double Slope




“J” STYLE CLASSIC DOUBLE SLOPE TOP ENCLOSURESNote: Enclosure prices do not include brackets, hangers or backplate


Note: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc. All accessories overlap the enclosure.


ARSS 19 — DOUBLE SLOPE TOP ENCLOSURE 19-1/2" HIGHARSS 25 — DOUBLE SLOPE TOP ENCLOSURE 25-1/2" HIGHARSS 29 — DOUBLE SLOPE TOP ENCLOSURE 29-1/2" HIGH

DESCRIPTION JVB-ARSS19 JVB-ARSS25 JVB-ARSS29PRICE WT. PRICE WT. PRICE WT.

Enclosure 16 GA. $ 73.05 5.8 $ 83.95 6.5 $ 92.05 7.9Enclosure 14 GA. 77.65 7.2 88.85 8.1 96.80 9.8Baked Metallic (standard colors) 4.95 - 5.20 - 5.35 -Knob Damper - - - - - -Backplate 20 GA. Galvannealed (Full Height) Unpainted 13.30 2.7 16.45 3.4 19.40 3.9Backplate 20 GA. CRS (Full Height) Baked Enamel 15.80 2.7 19.55 3.4 23.20 3.9Vertical Wall Bracket 6.15 0.5 6.50 0.6 7.10 0.7Ball Bearing Hanger - Bracket Mounted 6.25 0.5 6.25 0.5 6.25 0.53" End Cap 44.80 3.0 51.95 3.7 56.40 4.29" End Cap w/Access Door 77.45 5.6 85.65 6.6 92.25 7.34" Wall Sleeve 27.00 1.4 31.95 1.8 36.20 2.09" Wall Sleeve 33.85 3.0 39.05 3.6 42.80 4.29" Wall Sleeve w/Access Door 54.40 4.3 63.15 4.9 66.10 5.5Wall Sleeve Support 19.40 1.5 21.35 1.9 23.25 2.3Inside Corner 90° 100.25 6.8 116.00 8.0 135.55 8.8Inside Corner 135° 120.70 7.0 136.85 8.2 157.50 10.0Outside Corner 90° 112.65 8.8 142.70 11.2 154.65 12.8Outside Corner 135° 133.00 9.0 163.15 11.4 175.70 13.0

/FT

/EA

/FT

/EA

/FT

/EA

21

DURA-VANE IIENCLOSURES AND ACCESSORIES

J =Slip Jointed




DURA-VANE II “JDVA” & “JDVB” STYLE ENCLOSURES AND ACCESSORIESNote: Enclosure prices do not include brackets, hangers or backplate

DURA-VANE II “JDVA 7” & “JDVB 7” STYLE ENCLOSURES AND ACCESSORIESNote: Enclosure prices do not include brackets, hangers or backplate


Standard product is clear anodized grille with enclosure fronts baked powder finish in any standard colors shown in Mestek Color Selector.Grille and enclosure painted same color at no extra charge.No deduction is allowed for prime coat.


All accessories overlap the enclosure.


DESCRIPTION JDVA 14 JDVA 20 JDVA 24 JDVB 14 JDVB 20 JDVB 24

PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT. PRICE WT.Enclosure 16 GA. $47.60 4.5 $52.40 6.1 $61.75/FT 7.5 $48.90 4.5 $53.55 6.1 $63.80 7.5Enclosure 14 GA. 52.70 5.7 57.60 7.5 67.90 8.6 54.25 5.7 59.50 7.5 70.30 8.6Baked Metallic (standard colors) 2.15 - 2.30 - 2.70 - 2.15 - 2.30 - 2.70 -4" End Cap 30.50 2.8 35.55 3.9 38.20/EA 4.5 31.80 2.8 35.55 3.9 38.20 4.58-3/8" End Cap w/Access Door 57.15 4.0 63.15 5.1 65.60 5.7 58.70 4.0 63.15 5.1 66.10 5.74" Wall Sleeve 18.65 2.0 23.40 2.3 25.40 2.9 19.05 2.0 23.40 2.3 25.40 2.96" Wall Sleeve 21.00 2.3 25.80 2.9 28.80 3.4 21.70 2.3 25.80 2.9 28.80 3.48-3/8" Wall Sleeve 23.80 2.9 28.80 3.5 32.50 4.0 24.50 2.9 28.80 3.5 32.50 4.08-3/8" Wall Sleeve w/Access Door 46.85 3.1 52.20 3.8 56.65 4.2 47.25 3.1 52.20 3.8 56.65 4.2Wall Sleeve Support 8.20 0.5 9.70 0.6 10.70 0.7 8.50 0.5 9.70 0.6 10.70 0.7Inside Corner 90° 75.25 6.5 95.75 6.9 110.20 8.4 77.60 6.5 96.30 6.9 110.20 8.4Inside Corner 135° 96.30 7.0 116.10 7.5 134.00 9.0 98.30 7.0 116.10 7.5 134.00 9.0Outside Corner 90° 71.25 7.0 85.55 7.5 105.65 9.0 73.35 7.0 85.55 7.5 105.65 9.0Outside Corner 135° 90.60 7.5 105.80 8.0 134.40 9.5 93.30 7.5 105.80 8.0 134.40 9.512" Valve Compartment 16 GA. 71.95 5.1 88.55 6.7 98.15 8.1 75.10 5.1 88.55 6.7 98.15 8.112" Valve Compartment 14 GA. 75.05 6.3 95.30 8.1 104.05 9.2 76.90 6.3 95.30 8.1 104.05 9.218" Valve Compartment 16 GA. 94.35 7.7 103.75 10.1 110.85 12.2 97.35 8.0 106.55 10.4 116.40 12.518" Valve Compartment 14 GA. 98.40 9.5 109.55 12.2 117.85 13.8 101.60 9.8 112.30 12.5 123.35 14.1

DESCRIPTION JDVA 7 JDVB 7

PRICE WT. PRICE WT.Enclosure 16 GA. $38.45 3.0 $39.85 3.1Enclosure 14 GA. 42.00 3.7 43.55 3.8Baked Metallic (standard colors) 1.50 - 1.50 -4" End Cap 26.25 1.7 27.40 1.88-3/8" End Cap w/Access Door 51.40 2.9 53.15 3.04" Wall Sleeve 15.20 1.2 16.05 1.36" Wall Sleeve 17.15 1.8 18.50 1.98-3/8" Wall Sleeve 18.45 2.2 20.15 2.38-3/8" Wall Sleeve w/Access Door 39.35 2.8 41.00 2.5Wall Sleeve Support 7.90 0.3 8.55 0.3Inside Corner 90° 63.30 4.0 64.95 4.1Inside Corner 135° 83.20 4.4 85.50 4.5Outside Corner 90° 57.60 5.0 59.25 5.1Outside Corner 135° 83.25 5.4 86.45 5.512" Valve Compartment 16 GA. 58.70 3.0 60.45 3.112" Valve Compartment 14 GA. 59.95 4.3 62.30 3.318" Valve Compartment 16 GA. 74.85 4.5 78.10 4.618" Valve Compartment 14 GA. 79.60 6.4 82.80 5.0

/FT

/FT /FT

/FT /FT /FT /FT

/EA

/EA /EA

/EA /EA /EA /EA

22

DURA-VANE II ENCLOSURES AND ACCESSORIES

J = Slip Jointed




Standard product is clear anodized grille with enclosure fronts baked powder finish in any standard colors shown in Mestek Color Selector.Grille and enclosure painted same color at no extra charge.No deduction is allowed for prime coat.


All accessories overlap the enclosure.


DURA-VANE II “JDVA 10” & “JDVB 10” STYLE LOUVERED INLET TO THE FLOOR Note: Enclosure prices do not include brackets, hangers, backplate or floor angle

DURA-VANE II “JDVP B1” & “JDVP B2” PEDESTAL STYLE ENCLOSURES AND ACCESSORIES

Consult Factory for JDVP A1 or JDVP A2 Pricing.


DESCRIPTIONJDVP B1PB1 = 5-1/2"

JDVP B2PB2= 10-7/8"

PRICE WT. PRICE WT.Enclosure 16 GA. $55.60 5.0 $77.40 6.0Enclosure 14 GA. 73.65 6.3 81.55 7.3Baked Metallic (standard colors) 1.85 - 2.05 -Support Bracket Assembly (Maximum 3' on Center) 32.55 2.0 52.35 2.4

3" End Cap 42.75 2.0 106.35 3.04" Wall Sleeve 24.35 1.9 59.50 2.86" Wall Sleeve 25.40 2.5 64.95 3.08-3/8" Wall Sleeve 26.75 3.0 68.20 3.58-3/8" Wall Sleeve w/Access Door 80.35 3.3 - N/AWall Sleeve Support 17.05 0.8 19.55 1.4Corner 90° - Specify In or Out 162.55 8.0 233.70 12.0Corner 135° - Specify In or Out 189.30 9.3 281.70 13.0

DESCRIPTION JDVA 10LI JDVB 10LIPRICE WT. PRICE WT.

Enclosure 16 GA. $42.60 3.5 $44.65 3.7Enclosure 14 GA. 46.15 4.3 48.75 4.5Baked Metallic (standard colors) 1.80 - 1.80 -4" End Cap 28.65 2.2 29.95 2.28-3/8" End Cap w/Access Door 56.00 3.3 57.35 3.54" Wall Sleeve 16.95 1.6 18.20 1.86" Wall Sleeve 19.05 2.2 20.50 2.48-3/8" Wall Sleeve 23.45 2.6 24.45 2.88-3/8" Wall Sleeve w/Access Door 43.85 2.8 44.30 3.0Wall Sleeve Support 8.80 0.6 9.10 0.8Inside Corner 90° 68.70 4.4 71.35 4.5Inside Corner 135° 86.70 4.8 89.25 5.0Outside Corner 90° 65.00 5.4 67.75 5.5Outside Corner 135° 83.05 5.8 90.20 6.018" Valve Compartment 16 GA. 81.15 5.0 82.05 5.218" Valve Compartment 14 GA. 84.90 5.3 86.70 5.5

/FT /FT

/EA /EA

/FT /FT

/EA /EA

CATALOG NUMBER DESCRIPTION PRICE WT.DVFBP-10 10" Full Backplate - Unpainted Galv $9.95/FT 1.2DVFBP-10 10" Full Backplate - Painted CRS 11.40 1.2EAFA Extruded Aluminum Floor Angle - 8' lengths - Unpainted 7.60 0.3EAFA Extruded Aluminum Floor Angle - 8' lengths - Baked Powder (Standard Colors) 10.00 0.3EAFA Extruded Aluminum Floor Angle - 8' lengths - Baked Metallic (Standard Colors) 13.35 0.3


23


S - Slope Top F - Flat Top

PERFORATION:P = Partial

GUARDIAN ENCLOSURES AND ACCESSORIES ENCLOSURE LISTINGS (Depth) **B=5-5/16" (Height) 12" 18"

GUARDIAN SECURITY ENCLOSURESNote: Enclosure prices do not include brackets, hangers or backplate


LIST PRICE SHOWN

Notes: List add will be 12% of total list price of materials tagged for tagging individual cartons with room numbers, floor, building, etc. All Guardian enclosures assemblies require standard wall mounted “B” ball bearing hangers. Consult factory for type, availability and price of tamper resistant fasteners and drive tools. These items are not included in above pricing. For Torx-Pin security stainless steel fasteners to secure accessories, consult factory. ▲ 2" intermediate joiner piece used with full perforation enclosure at enclosure joints. Its use is optional with partial perforation.

** An offset of 4-3/8" available by quote, consult factory.

*** For orders 25 feet or less, consult factory for pricing.

Available in Stainless Steel. Consult Factory.

DESCRIPTION GSBS-12 GSBS-18 GSBF-12 GSBF-18

PRICE WT. PRICE WT. PRICE WT. PRICE WT.Enclosure 14 GA. Partial Perforation $68.75 5.1 $84.55 7.7 $68.75 5.2 $84.55 7.8Enclosure 14 GA. Full Perforation. ▲ Consult FactoryEnclosure 12 GA Partial Perforation *** 81.40 7.1 103.60 10.8 81.40 7.2 103.60 10.0Enclosure 12 GA. Full Perforation. ▲ Consult FactoryBaked Powder (standard colors) 4.45 - 4.55 - 4.45 - 4.55 -Baked Metallic (standard colors) 6.65 - 6.85 - 6.65 - 6.85 -Partial Backplate 14 GA. - 8' Lengths Only 8.15 0.5 8.15 0.5 8.15 0.5 8.15 0.5Full Backplate 14 GA. 21.70 3.1 27.70 4.7 21.70 3.1 27.70 4.73" End Cap 14 GA. 64.95 3.1 70.25 4.1 62.85 3.2 70.25 4.22" Intermediate Joiner Piece ▲ 38.15 1.2 44.30 1.9 38.15 1.6 44.30 2.14" Wall Sleeve 14 GA. (LH or RH) 44.30 2.1 50.55 2.7 44.30 3.0 50.55 4.06" Wall Sleeve 14 GA (LH or RH) 47.70 3.1 54.05 4.1 47.70 3.2 54.05 4.28-3/8" Wall Sleeve 14 GA (LH or RH) 54.35 4.3 61.75 6.5 54.35 4.5 61.75 6.7Wall Sleeve Support (LH or RH) 17.10 1.1 18.10 1.3 17.10 1.2 18.10 1.5Inside Corner 90° 14 GA. 135.45 10.2 155.80 11.5 135.45 10.4 155.80 11.7Outside Corner 90° 14 GA. 138.05 10.9 160.50 12.5 138.05 11.1 160.60 12.7

/FT /FT /FT /FT

/EA /EA /EA /EA

24

DRAFT BARRIER, RETURN TO WALL AND LOUVERED INLET STYLESDoes not apply to Standard Classic Enclosure with Underlapping Accessories or to Duravane Enclosure

Return to Wall, Louvered Inlet(RWLI)

Return to Wall, No Inlet Louvers(Draft Barrier Style)

(RWDB)

LIST ADD PER FOOT OF ENCLOSURE SIZE SIZE SIZE K OFFSET A OFFSET B OFFSET $9.10/FT $11.50/FT $12.05/FT

LIST ADD PER FOOT OF ENCLOSURE SIZE SIZE SIZE K OFFSET A OFFSET B OFFSET $9.10/FT $11.50/FT $12.05/FT

STANDARD ENCLOSURE MODIFICATIONS

*Consult factory for use on JVK-S8 & AR7.

*Consult factory for use on JVK-S8 & AR7.

25

METAL PIPING ENCLOSURES

STANDARD COLUMN ENCLOSURE SETSPrice Includes2 - Corners1 - 2-1/2" Joiner Strip1 - 4'0" B-610 Hanger Strip1 - Rubber U-ChannelRoll Pipe Hangers are separate

All PCH covers are 3-3/4" deep.Available in Stainless Steel and Aluminum. Consult Factory.

CATALOG NUMBER DESCRIPTION LIST

PRICE WT.Pipe Cover Horizontal

PCH-4 4" High 18 GA. - 8' Lengths

Prime $14.35/FT 1.8Add for Baked Powder (standard colors) 2.55 —Add for Baked Metallic (standard colors) 3.70 —

PCH-5 5" High 18 GA. - 8' Lengths

Prime 15.50 2.0Add for Baked Powder (standard colors) 2.70 2.0Add for Baked Metallic (standard colors) 4.00 —

PCH-11 11'' High 18 GA. - 8' Lengths

Prime 19.00 3.0Add for Baked Powder (standard colors) 3.15 —Add for Baked Metallic (standard colors) 4.60 —

PCH-17 17'' High 18 GA. - 8' Lengths

Prime 23.80 4.0Add for Baked Powder (standard colors) 3.65 —Add for Baked Metallic (standard colors) 5.45 —

SCE-4-TS2 2 1/2" Joiner Strip For 4" Assembly 32.30/EA 0.3 SCE-4-TS4 4" Joiner Strip For 4" Assembly 33.80 0.4 SCE-5-TS2 2 1/2" Joiner Strip For 5" Assembly 32.55 0.5 SCE-5-TS4 4" Joiner Strip For 5" Assembly 34.60 0.5 SCE-11-TS2 2 1/2" Joiner Strip For 11" Assembly 34.60 1.0 SCE-11-TS4 4" Joiner Strip For 11" Assembly 36.25 1.0 SCE-17-TS2 2 1/2" Joiner Strip For 17" Assembly 36.25 1.5 SCE-17-TS4 4" Joiner Strip For 17" Assembly 38.00 1.5 B-610 Mounting Strip - 8' Lengths Only 3.65/FT 0.4 RPH-K Roll Pipe Hanger 6.40/EA 0.2

CATALOG NUMBER DESCRIPTION LIST

PRICE WT.Pipe Cover Vertical

PCHV-525 X 5 Two Side18 GA.- 8' Lengths


PCHV-52-TS2 2" Joiner Strip 30.00 /EA 1.0

PCHV-828 X 8 Two Side18 GA. - 8' Lengths


PCHV-82-TS2 2" Joiner Strip 36.00/EA 2.0

PCHV-535 X 5 Three Side 18 GA.- 8' Lengths



PCHV-838 X 8 Three Side 18 GA.- 8' Lengths



1 x 1 FA

1 X 1 SideSupport Angle(2 Per VerticalPipe Enclosure - 8' Lengths)

Prime $4.40/FT 0.4Baked Powder (standard colors) 6.80 —Baked Metallic (standard colors) 10.15 —

UCHAN ‘U' Rubber Channel Trim $3.45/FT 0.1

CAT # DESCRIPTION List Price Wt.SCE-4 4" High $169.00 4.0

SCE-5 5" High $186.00 5.0

SCE-11 11" High $212.80 11.0

SCE-17 17" High $231.25 17.0

26

TYPICAL ENCLOSURE LAYOUTSSTYLES “S” AND “KS” SLOPE TOP INSTALLATION AND ACCESSORY DETAILS

STYLES “PM” PEDESTAL MOUNTED INSTALLATION AND ACCESSORY DETAILS

27

“J” STYLE CLASSIC WITH SLIP-JOINTED EDGES, OVERLAPPING ACCESSORY DETAILS

STANDARD CLASSIC WITH WIPED EDGE, UNDERLAPPING ACCESSORY DETAILS

28

FINNED TUBE ORDERING PROCESS

3. In to the floor installations, louver inlet, either an extruded aluminum floor angle or a standard floor angle, one by one, will be required (See page 3).

4. Element footage based on plan and spec for heat loss (In two tier applications footage is doubled). Insure that the element selected fits in the enclosure selected. Element cradles will ship with element based on the number of brackets and hangers ordered (For elements available se pages 2 & 3).

C. Cover and accessories 1. Enclosure model and height determines which page of

the price book to consult. Review plans and specifications or job measurements to determine length of enclosure required. Overall enclosure length can be adjusted based on the accessories to be used in conjunction with individual pieces of cover.

2. Enclosure Options a. Select gauge as specified. b. Add appropriate charge if baked enamel finish is

specified. Note: Special colors take additional time and must be quoted by factory.

c. Add for knob or tamper proof dampers if required by plans and specifications.

3. Accessories – Specify the number and quantity of accessories. All special degree corners must be quoted by factory and will include a list set-up charge and engineering charge on each individual angle.

4. Additional Charges a. Check if tagging is required. Add a 12% list charge

for factory tagging. See description of “tagging” in price sheet.

b. If return to wall closed inlet or return to wall louvered inlet are specified, apply the list add per foot shown on the associated price sheet (page 15).

A. Select enclosure model and height as well as element based on plans, specifications and/or heat output requirements

B. Rough-in (page 4) 1. Select partial or full backplate (Backplate should

extend to within 1" of end of runs to support accessories and will therefore typically have more footage than cover). Make sure that backplate for valve compartment is included. Partial backplate comes in 8' lengths and is cut on the job to length. Therefore, some extra should be ordered to cover small cuts thrown away.

a. Urethane gasket is typically required factory installed or field installed behind hanger strip.

2. Brackets – Typically water brackets are specified. When ordering brackets you must know the offset and height of the enclosure.

a. Minimum of two brackets per section of cover, three with cover over six feet (see page 4). Minimum of one hanger or wall sleeve support on end accessories that are not returned to the wall (i.e., LCS-10).

b. If return pipe hangers are specified, these should be ordered based on a minimum of one roll pipe hanger per 4' of supported pipe.

c. In two tier applications, additional bracket mounted hangers will be required. Depending upon the height of an enclosure, this can be accomplished by adding a second tier on the original bracket. A ball bearing hanger bracket is mounted to the front of the original bracket. Typically the same number of ball bearing hangers or intermediate hangers are required as original brackets. 20" and 24" brackets have slots for second tier (bracket mounted hangers).

d. For shorter enclosures, wall mounted hangers (BB Hgr) must be used mounted off to the side of the original brackets and hangers.

e. For steam 2 tier installations, a standard bracket with 2 bracket mounted hangers will be required or 1 bracket mounted hanger and 1 wall mounted hanger.

29

TERMS• FREIGHT TERMS: F.O.B Westfield. NO FREIGHT ALLOWANCE ON SHIPMENTS OF LESS THAN 1000 lbs. For shipments of 1000 lbs. or over into ZONE I, full freight will be allowed. ZONE I comprises the following states: Connecticut, Delaware, District of Columbia, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Illinois, Indiana, Iowa, Kentucky, Michigan, Minnesota, Missouri, North Carolina, Ohio, Tennessee and Wisconsin. For shipments of 1000 lbs. or over into ZONE II, full freight will be allowed. However, a freight surcharge of 6% of the net price will be applied as a net extra for all steel elements, covers, and accessories. For all copper and aluminum elements only a freight surcharge of 1-1/2% of the net price will be applied as a net extra. Zone II comprises the following states: Alabama, Arkansas, Colorado, Florida, Georgia, Kansas, Louisiana, Mississippi, Nebraska, New Mexico, North Dakota, Oklahoma, South Carolina, South Dakota, Texas, Utah and Wyoming. For shipments of 1000 lbs. or over into ZONE III, full freight will be allowed. However, a freight surcharge of 9% of the net price will be applied as a net extra for all steel elements, covers, and accessories. For all copper and aluminum elements only a freight surcharge of 3% of the net price will be applied as a net extra. Zone III comprises the following states: Arizona, California, Idaho, Montana, Nevada, Oregon and Washington. Full freight allowed orders will be subject to a maximum of four (4) releases per job, after which releases will be prepaid and add. FREIGHT ROUTING SHALL BE AT THE DISCRETION OF THE SHIPPER.• PRICES: Published trade prices in effect at time of receipt of order at our offices are firm provided the complete order is released for fabrication. All special quotations remain firm for 60 days. No obligation is assumed by this Corporation to sell, to anyone holding this book, any of the items listed herein at the prices stated.• VALID ORDERS: An order is not a valid order until acknowledged by the home office in Westfield, MA.• TERMS: Net 30 Days. Prepaid freight or cartage charges paid by us are not subject to cash discount.• TAXES: The prices listed herein exclude Federal, State, or Municipal Tax applicable to the transaction. Such taxes, where applicable to the transaction should be paid directly to the governing body by the Purchaser.• CLAIMS: As all goods are shipped at buyer’s risk they should be examined carefully before signing transportation delivery receipts. If transportation company tenders delivery of goods in bad order, buyer should insist on transportation agent making a notation of conditions on delivery receipt and request an inspection within 48 hours, thus enabling buyer to secure prompt payment of transportation claims filed by him for value of damaged material. The responsibility of this Company ceases upon delivery of goods in good order to transportation companies. All orders are accepted subject to delays on account of government requirements, strikes, accidents or other causes beyond our control.• MINIMUM ORDERS: Orders with an invoice of less than $25.00 will be invoiced at $25.00.• RETURNED GOODS: Goods must not be returned except by written permission from the factory, and when so returned will be accepted only as stated in the following conditions:1. Special material or material with baked enamel finish is not subject to return.2. All transportation charges for returned goods must be prepaid by the shipper.3. Standard Fin-Tube elements (S-143, S-144, C-144, C-145, C-1435, C-35) (lengths from 2' to 12' in 6" increments)

will be accepted provided they are received in useable condition and subject to a 25% rehandling charge.4. Enclosures of any type are not subject to return.5. Modified or special accessories of any type are not subject to return.6. Standard catalogued accessories (brackets, hangers splice plates, corner pieces and end pieces) may be returned

upon written permission. After inspection at the factory, if they are found to be in good condition, they will be accepted for credit, subject to a 25% rehandling charge.

7. No goods will be accepted for return more than 6 months after shipment. CHANGES TO A RELEASED ORDER – Any changes to a released order will result in a $25.00 net charge

per change. CANCELLATIONS – A minimum of 10% and maximum of all time and material will be charged, depending on

work completed.

30

LIMITED WARRANTYCommercial Finned Tube Radiation

1. The Manufacturer warrants to the original owner at the original installation site that the Commercial Finned Tube (the “Product”) will be free from defects in material or workmanship for a period not to exceed (1) year from date of shipment from the factory. If upon examination by the Manufacturer the Product is shown to have a defect in material or workmanship during the warranty period, the Manufacturer will repair or replace, at its option, that part of the Product which is shown to be defective.

2. This limited warranty does not apply:(a) if the Product has been subjected to misuse or neglect, has been accidentally or intentionally damaged, has not

been installed, maintained or operated in accordance with the furnished written instructions, or has been altered or modified in any way by any unauthorized person.

(b) to any expenses, including labor or material, incurred during removal or reinstallation of the defective Product or part thereof.

(c) to any workmanship of any installer of the Product.

3. This limited warranty is conditional upon:(a) shipment, to the Manufacturer, of that part of the Product thought to be defective. Goods may only be returned

with the prior written approval of the Manufacturer. All returns must be freight prepaid.(b) determination in the reasonable opinion of the Manufacturer that there exists a defect in material or

workmanship.

4. Repair or replacement of any part under this Limited Warranty shall not extend the duration of the warranty with respect to such repaired or replaced part beyond the stated warranty period.

5. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, AND ALL SUCH OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS LIMITED WARRANTY. IN NO EVENT SHALL THE MANUFACTURER BE LIABLE IN ANY WAY FOR ANY CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OF ANY NATURE WHATSOEVER, OR FOR ANY AMOUNTS IN EXCESS OF THE SELLING PRICE OF THE PRODUCT OR ANY PARTS THEREOF FOUND TO BE DEFECTIVE. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY BY EACH JURISDICTION.

31

NOTES:

260 North Elm St., Westfield, MA 01085 Tel: (413) 564-5535 Fax: (413) 564-5661www.sterlingheat.com

Documents

COMMERCIAL FINNED TUBE RADIATION TRADE PRICES