4
Sky Oak

com.my fiw www. · Fax : +603 - 3343 6721 (Marketing) +603 - 3342 6721 (Admin) Email : enquiry@˜w.com.my QUALITY SYSTEM ... JIS G 3302 ASTM A 653 & other equivalent standards

  • Upload
    vancong

  • View
    218

  • Download
    0

Embed Size (px)

Citation preview

www.fiw.com.my

The technical information contained in this brochure is only intended to provide indicative performance of the product. All the information provided herein is given with our best of knowledge true and accurate based on carefully made test on laboratory and field tested results. However, no guarantee of results is implied since condition of use is beyond our control. Therefore, this is not a statement of warranty. The contents are subject to change without prior notice, for up-to-date information, please contact the department concerned. GalMaxx® and ColourMaxx® is a registered trademark of FIW Steel Sdn. Bhd. No part of this material may be transmitted by any means or reproduced in any form without the prior consent of FIW Steel Sdn. Bhd.

FIW STEEL SDN. BHD. (3835-P)

O�ce / Factory :

No. 3, Jalan Keluli Satu,

Kawasan Perindustrian Bukit Raja Selatan,

40000 Shah Alam, Selangor Darul Ehsan, Malaysia

Tel : +603 - 3343 1177 (Hunting Line)

Fax : +603 - 3343 6721 (Marketing)

+603 - 3342 6721 (Admin)

Email : enquiry@�w.com.my

QUALITYSYSTEM

MS ISO 9001 REG. NO. AR 2495

QUALITYMANAGEMENT

074

QUALITYSYSTEM

MS ISO 9001 REG. NO. AR 2495

MS ISO/IEC GUIDE 62:1999QS 02121999 CB 01

QUALITYSYSTEM

MS ISO 9001 REG. NO. AR 2495

LISTEDPRODUCT

CERTIFIED TO BS 476 PART 6 : 1989 BS 476 PART 7 : 1997

CERTIFICATION NO: LF003301

CorrosionResistance

EnvironmentalFriendly

Keep UnderRoof

Lightweight

HighDurability

Recyclable TermiteProof

FIW SteelWarranty

5050up toup to

Sky

Oak

*The dimensional tolerance for thickness, width, flatness and camber are in accordance with the requirement of Japanese IndustrialStandard JIS G 3302.*Other coating mass are available upon request.

Note:● Brown and blue colour tinting is for material idenfication purpose only, no colour warranty will be provided. ● All items featured may differ from the actual product’s colour. ● To avoid storage related corrosion, it is advisable not to leave the fabricated product in the open for prolonged period of time. It is also recommended that the product be used within 6 months.

SPECIFICATION

The development of GalMaxx® Premium is specially dedicated to meet the ever changing and sophisticated market demand for enhanced corrosion resistance galvanized steel subject to reasonable period of outdoor exposure.

Base Steel Chemical Composition

Element Guaranteed (%) Typical (%)

Carbon (C) 0.15 Max 0.03 - 0.06Manganese (Mn) 0.60 Max 0.12 - 0.34Phosphorus (P) 0.10 Max 0.009 - 0.019Sulphur (S) 0.05 Max 0.003 - 0.014

Supply Condition

Standard Coating Mass : Z12, Z18, Z20, Z27

Surface Finish : Minimized Spangle

Surface Treatment : Clear / Oak / Sky resin coated

Oiling : Not oiled, dry

Clear / TintedResin Coating

Clear / TintedResin Coating

Base MetalGalMaxx®

CoatingGalMaxx®

Coating

CROSS SECTION of

Made to Conform :-

Japanese Industrial Standard - JIS G 3302

ASTM A 653 & other equivalent standards

General Description

Galmaxx® Premium - Hot Dip Galvanized Steel

is coated with a clear/tinted resin coating,

minimized spangle surface and guaranteed

minimum Yield Strength of 550 Mpa

Oak Sky

Mechanical Properties

Preferred Base Metal Thickness Strip Width

0.40 - 1.60mm Mother Coil : 1219mm Other strip widths are available upon request

Dimensions (for Normal Product Supply)

Advantages

• Offers Clear, Oak or Sky tinted

• Good corrosion resistance

• Good soil repellant

• Able to withstand severe fabricating process

• Excellent outdoor exposure performance

• Listed product approved by SIRIM

• Warranty up to *50 years

*Other thicknesses are also available

Longitudinal Tensile

Tensile Strength (MPa)

Yield Strength (MPa)*Terms & conditions apply.

G550*(BMT 0.40 - 1.00mm)

G450*(BMT 1.20 - 1.60mm)

Min 550

Min 550

Min 450

Min 450

*The dimensional tolerance for thickness, width, flatness and camber are in accordance with the requirement of Japanese IndustrialStandard JIS G 3302.*Other coating mass are available upon request.

Note:● Brown and blue colour tinting is for material idenfication purpose only, no colour warranty will be provided. ● All items featured may differ from the actual product’s colour. ● To avoid storage related corrosion, it is advisable not to leave the fabricated product in the open for prolonged period of time. It is also recommended that the product be used within 6 months.

SPECIFICATION

The development of GalMaxx® Premium is specially dedicated to meet the ever changing and sophisticated market demand for enhanced corrosion resistance galvanized steel subject to reasonable period of outdoor exposure.

Base Steel Chemical Composition

Element Guaranteed (%) Typical (%)

Carbon (C) 0.15 Max 0.03 - 0.06Manganese (Mn) 0.60 Max 0.12 - 0.34Phosphorus (P) 0.10 Max 0.009 - 0.019Sulphur (S) 0.05 Max 0.003 - 0.014

Supply Condition

Standard Coating Mass : Z12, Z18, Z20, Z27

Surface Finish : Minimized Spangle

Surface Treatment : Clear / Oak / Sky resin coated

Oiling : Not oiled, dry

Clear / TintedResin Coating

Clear / TintedResin Coating

Base MetalGalMaxx®

CoatingGalMaxx®

Coating

CROSS SECTION of

Made to Conform :-

Japanese Industrial Standard - JIS G 3302

ASTM A 653 & other equivalent standards

General Description

Galmaxx® Premium - Hot Dip Galvanized Steel

is coated with a clear/tinted resin coating,

minimized spangle surface and guaranteed

minimum Yield Strength of 550 Mpa

Oak Sky

Mechanical Properties

Preferred Base Metal Thickness Strip Width

0.40 - 1.60mm Mother Coil : 1219mm Other strip widths are available upon request

Dimensions (for Normal Product Supply)

Advantages

• Offers Clear, Oak or Sky tinted

• Good corrosion resistance

• Good soil repellant

• Able to withstand severe fabricating process

• Excellent outdoor exposure performance

• Listed product approved by SIRIM

• Warranty up to *50 years

*Other thicknesses are also available

Longitudinal Tensile

Tensile Strength (MPa)

Yield Strength (MPa)*Terms & conditions apply.

G550*(BMT 0.40 - 1.00mm)

G450*(BMT 1.20 - 1.60mm)

Min 550

Min 550

Min 450

Min 450

www.fiw.com.my

The technical information contained in this brochure is only intended to provide indicative performance of the product. All the information provided herein is given with our best of knowledge true and accurate based on carefully made test on laboratory and field tested results. However, no guarantee of results is implied since condition of use is beyond our control. Therefore, this is not a statement of warranty. The contents are subject to change without prior notice, for up-to-date information, please contact the department concerned. GalMaxx® and ColourMaxx® is a registered trademark of FIW Steel Sdn. Bhd. No part of this material may be transmitted by any means or reproduced in any form without the prior consent of FIW Steel Sdn. Bhd.

FIW STEEL SDN. BHD. (3835-P)

O�ce / Factory :

No. 3, Jalan Keluli Satu,

Kawasan Perindustrian Bukit Raja Selatan,

40000 Shah Alam, Selangor Darul Ehsan, Malaysia

Tel : +603 - 3343 1177 (Hunting Line)

Fax : +603 - 3343 6721 (Marketing)

+603 - 3342 6721 (Admin)

Email : enquiry@�w.com.my

QUALITYSYSTEM

MS ISO 9001 REG. NO. AR 2495

QUALITYMANAGEMENT

074

QUALITYSYSTEM

MS ISO 9001 REG. NO. AR 2495

MS ISO/IEC GUIDE 62:1999QS 02121999 CB 01

QUALITYSYSTEM

MS ISO 9001 REG. NO. AR 2495

LISTEDPRODUCT

CERTIFIED TO BS 476 PART 6 : 1989 BS 476 PART 7 : 1997

CERTIFICATION NO: LF003301

CorrosionResistance

EnvironmentalFriendly

Keep UnderRoof

Lightweight

HighDurability

Recyclable TermiteProof

FIW SteelWarranty

5050up toup to

Sky

Oak