Upload
trananh
View
222
Download
0
Embed Size (px)
Citation preview
1Catalog E 074486 01/15 Edition 2
CompactPCI Connectors acc. to PIGMG 2.0 Rev. 3.0
GeneralLate in 1999 PCI Industrial Computer Manufacturers Group(PICMG) introduced the new revision 3.0 of the Compact-PCI Core Specification. Version 3.0 of this specificationcomprises a.o. hot swap and computer telephony specifi-cations such as pin sequencing. For CompactPCI, themetric ERmet connectors are specified in accordance withIEC 61076-4-101 which are available in build types A, B,AB, and as monoblock versions. This new version of theCompactPCI specification has the consequence a.o. thatfor 3 HE backplanes on position P2 a male connector, build
type B with long connection pins for AB transfer and ABshrouds are inserted into position rP2. At the rear card end,on position rJ2, a sheilded female connector in build typeAB is specified. For 6 HE backplanes, on P3 and P5, themale connector - build type B with long connection pins -for AB transfer and AB shrouds have to be inserted intopositions rP3 and rP5. At the rear card end, on positionsrJ3 and rJ5, a shielded female connector, build type AB,has been specified here. On P4, a blade contact strip, buildtype A with long connection pins for A shroud and A shroudframes, has been specified on position rP4. For the rearcard end, a shielded female connector, build type A, hasbeen defined on rJ4. For male connectors with shrouds inbuild types A and B, the specification only requires a seriesa grounding for the upper screening panel.All necessary connectors required in accordance with thenew CompactPCI specification are available from ERNI. Inaddition, for CompactPCI applications, ERNI also offers aneconomic solution for a male connector with long terminalpins, which is populated with shield contacts on row a only.In addition to the new AB compatible male connectors forCompactPCI, ERNI also supplies shrouds. Here, all shroudsare available in four different heights (3.9 mm, 4.5 mm, 5.3mm, and 6.1 mm) in order to adapt to the printed circuitboard thickness of the backplanes.
2
Ordering Informations
CompactPCI Connectors acc. to PIGMG 2.0 Rev. 3.0
Part NumberLocation OnThe PCB
Number OfPositions*
tcatnoCsenalpkcaB roF srotcennoC elaMLoading*
Part NumberLocation OnThe PCB
Number OfPositions*
Female Connectors For Daughter Cards
Type A With Peg P1 25 CB---BC 923190Type A With Peg And Extended Terminals For Shrouding P1 Special 25 TP---PT 923197Type A Without Peg And With Extended Terminals P1 25 TS---ST 923342Type B (AB Compatible) With Extended Terminals For Shrouding P2, P5 22 TSSSSS- 923345Type B (AB Compatible) With Extended Terminals For Shrouding P3 19 TSSSSST 923341Type B (AB Compatible) With Extended Terminals For Shrouding P3 19 TSSSSS- 923346Type A With Extended Terminals For Shrouding P4 25 S----ST 923347Type A With Peg And Extended Terminals For Shrouding P4 25 TRRRRRT 064688Type A With Peg And Extended Terminals For Shrouding P4 25 TSSSSST 103975Type B (AB Compatible) With Extended Terminals For Shrouding P5 Telecom 22 ------- 923339Type B (AB Compatible) With Extended Terminals For Shrouding P2, P5 22 TSSSSST 923340
Type A With Shield, Without Peg J1, J4 25 354142Type A With Split Shield, Partially Loaded J4 Telecom 25 104512Type A With Split Shield, Partially Loaded rJ4 Telecom 25 104697Type AB With Shield, Without Peg rJ2, rJ5 22 114809Type AB With Shield, Without Peg rJ3 19 134075Type B With Upper Shield J2, J5 22 354148Type B With Upper Shield J3 19 354146
Part NumberLocation OnThe PCB
Number OfPositions*
thgieHsrotcennoC elaM roF sduorhS(mm)
Type A Shroud 25 Positions rP1, rP4 25 14.35 114436Type A Shroud 25 Positions rP1, rP4 25 14.95 054795Type A Shroud 25 Positions rP1, rP4 25 15.75 054794Type A Shroud 25 Positions rP1, rP4 25 16.55 054793Type AB Shroud 22 Positions rP2, rP5 22 14.95 114426Type AB Shroud 22 Positions rP2, rP5 22 15.75 114427Type AB Shroud 22 Positions rP2, rP5 22 16.55 114428Type AB Shroud 19 Positions rP3 19 14.35 114487Type AB Shroud 19 Positions rP3 19 14.95 114488Type AB Shroud 19 Positions rP3 19 15.75 114489Type AB Shroud 19 Positions rP3 19 16.55 114490
Part NumberApplication Code Number
roloCsyeK gnidoC
Coding Keys For Male Connectors And Shrouds 5.0 Volts P1 1567 Brilliant Blue 043347Coding Keys For Male Connectors And Shrouds 3.3 Volts P1 3456 Cadmium Yellow 043345Coding Keys For Male Connectors And Shrouds Telecom P4 1248 Strawberry Red 043350Coding Keys For Female Connectors 5.0 Volts J1 2348 Brilliant Blue 043337Coding Keys For Female Connectors 3.3 Volts P1 1278 Cadmium Yellow 043335Coding Keys For Female Connectors Telecom J4 3567 Strawberry Red 043340
* Length = 50mm; Pitch = 2.0mm => 50 / 2 = 25 Positions**Cross Sectional Loading From Z To F
Catalog E 074486 01/15 Edition 2
2
10 x 2 = 20 8 10 x 2 = 20
2
2
4 x
2 =
8
a
b
c
d
e
1111525 58
21
21.9+-
0.1 9.5+-
0.1
50 max.
0.5+ 0.2
Anforderungsstufe
class
Id.-Nr. Datum
date
Abschirmblech
104514
- shielding Abschirmblech
104515
- shielding
11.4
12.25
3 - 0.4
2
1.7
+ -0.
05
10.8
-0.
2
EE - Zone fuer
durchkontaktierte
Loecher Ø 0.6 ± 0.05
Compliant zone for
thru hole
Ø 0.6 ± 0.05
20.6+-
0.05
10 x 2 = ( 20 ) 10 x 2 = ( 20 )
2
5 x
2 =
(10
)
1.5
8
a
b
c
d
e
f
111131525
0.1
alle Loecher
durchkontaktiert,
Bohrloch 0.7 ± 0.02
Lochbild fuer Leiterplatte
( Bestueckungsseite )
Board hole pattern
( Component mounting side )
plated thru,
drill hole 0.7 ± 0.02
all holes
Fehlende Masse und Angaben nach IEC 61076 - 4 - 101
Missing information and dimensions per IEC 61076 - 4 - 10
XXXXX
XXXXXXXX Information :
Abschirmblech oben montiert
shielding mounted on top
ohne Fixierstift - without locating pegs
ERmet Federleiste A
ERmet Female Type A
2:1
104512
a
b
c
d
e
1111525
Bestueckungsplan - contact layout
= bestueckt - assemble
58
21 x 2 =
5 x
2 =
abcde
1
2
4 x
2 =
8 2
21 x 2 = 42
2
abcde
1
Bestückungsplan -
= bestückt - assemble
contact layout
2
21
44max.
XXXXERNI
1
1148092
22
Anforderungsstufe Id.-Nr. Datumdateclass
EE-Zone fürdurchkontaktierteLöcher [ 0.6 60.05
Compliant zone forthru hole[ 0.6 60.05
11.4
3-0.4
2
1.76
0.05
10.8
-0.2
13.85
abcd
1
0.1alle Löcher
durchkontaktiert,Bohrloch 0.7
Lochbild für Leiterplatte(Bestückungsseite)
all holes plated thru,drill hole 0.7
Board hole pattern(Component mounting side)
2
20.6 +-
0.05
2(10)
1.5
(42)
ef
Fehlende Masse und Angaben nach IEC 61076-4-101Missing information and dimensions per IEC 61076-4-101
Information :Abschirmblech obenshielding mounted on top
ElektroapparateD-73099
Scal
Designation
Toleranc
114809
ERmet Federleiste AB 22
ERmet Female Type AB 22
2:1
I
All rightsOnly forTo insure that this is theversion of this drawing,contact one of the ERNIbeforeSubject to modificationpriorDrawing will not be
21 x 2 = 42
4 x
2 =
8
2
2
2
10
,8
1,9
Abschirmblech / shielding
44 max.
21
prior notice.
contact one of the ERNI companies
Date
25.06.2012b
Index ERMB22
ERmet Female Type B22
ERmet Federleiste B22
354148
2:1Information: Tolerances Scale
All Dimensions
in mm
Class
I
Subject to modification without
A3
Designation
www.ERNI.com
before using.
Drawing will not be updated.
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
Co
pyr
igh
t b
y E
RN
I G
mb
H
Pro
pri
eta
ry n
oti
ce p
urs
ua
nt
to I
SO
16
016
to
be
ob
se
rve
d.
b
c
d
122
a
e
EN-Zone für
durchkontaktierte
Löcher Ø0,6 ±0,05
compliant zone forthru hole Ø0,6 ±0,05
3
-0,4
11,4
all holes
f
e
d
c
b
a
(Component mounting side
alle Löcher
122
Board hole pattern(Bestückungsseite)
Lochbild für Leiterplatte
0,05
1,5
2
1)
21 x 2
2
= (42)
5 x
2
= (
10)
Missing information and dimensions per IEC 61076-4-101Fehlende Maße und Angaben nach IEC 61076-4-101
Schichtaufbau im metallisierten Loch
siehe Zeichnung 114406
see drawing 114406 Metal plating of plated through hole
1) Ø 0.6 ±0.05 Durchmesser des metallisierten Loches
Ø 0.6 ±0.05 Diameter of finished plated-through hole Ø 0.7 ±0.05 Bohrungsdurchmesser des Loches
Ø 0.7 ±0.05 Diameter of drilled hole
Abschirmblech oben montiert
shielding mounted on topAnforderungsstufe 2 / class 2BA2
Bestückungsplan /
d
e
contact layout
122
a
b
c
= bestückt / assembled
16.55
114436
49,9
2
126
x 2
=
22
82010 x 2 = 2010 x 2 =
14,8
H
3,9
14,3
5
11,6
Index Name
Tool-Nr.:Scale
Material
Designation
Class
Date Name
Tolerances
Con
side
r pr
otec
tion
mem
o fro
m D
IN 3
4
Modification Nr. Date
Dimension Nr.
054792
ERmet A Übergaber. m. Klemmst
ERmet A Shroud with clamp part
siehe Einzelteile
see pieceparts
5:1
D
O:00010255.SZN
Ident-Nr. Mass H
15.75
14.95
14.35
054795
054794
054793
dimension HI.D. number
All Dimensionsin mm
Elektroapparate GmbH
D-73099 ADELBERG
All rights reserved.Only for information.To insure that this is the latestversion of this drawing, pleasecontact one of the ERNI companiesbefore using.Subject to modification withoutprior notice.Drawing will not be updated.
114428
114427
114426
114425
16.55
15.75
14.95
14.35
Ident-Nr. Maß H
I.D.number dimensions H
15,4
2
126
x 2
=
14,8
2
4221 x 2 =
43,9
3,9
14,3
5
H
11,6
Index Name
Tool-Nr.:Scale
Material
Designation
Class
Date Name
Tolerances
Con
side
r pr
otec
tion
mem
o fro
m D
IN 3
4
Modification Nr. Date
Dimension Nr.
114429
ERmet AB 22 Überga. m. KLemmst.
ERmet AB 22 Shroud with clamp
siehe Einzelteile
see pieceparts
5:1
D
O:00010299.SZN
All Dimensionsin mm
Elektroapparate GmbH
D-73099 ADELBERG
All rights reserved.Only for information.To insure that this is the latestversion of this drawing, pleasecontact one of the ERNI companiesbefore using.Subject to modification withoutprior notice.Drawing will not be updated.
114490
114489
114488
114487
16.55
15.75
14.95
14.35
Ident-Nr. Maß H
I.D.number dimensions H
3,9
14,3
5
H
11,6
2
3618 x 2 =
37,9
15,4
14,8
2
126
x 2
=
Index Name
Tool-Nr.:Scale
Material
Designation
Class
Date Name
Tolerances
Con
side
r pr
otec
tion
mem
o fro
m D
IN 3
4
Modification Nr. Date
Dimension Nr.
114486
ERmet AB 19 Überg. m. Klemmst.
ERmet AB 19 Shroud with clamp.
siehe Einzelteile
see pieceparts
5:1
D
O:00010296.SZN
All Dimensionsin mm
Elektroapparate GmbH
D-73099 ADELBERG
All rights reserved.Only for information.To insure that this is the latestversion of this drawing, pleasecontact one of the ERNI companiesbefore using.Subject to modification withoutprior notice.Drawing will not be updated.
http://Connect.ERNI.com/contact/
Catalog E 074482 02/00 Edition 1
Coding keys for male connectors and shrouds Coding keys for female connectors
Coding Keys
Part NumberCodeNo.
ColourCoding Key
3568 043342Pastel OrangeRAL 2003Fincke 00233197
1247 043332Pastel OrangeRAL 2003Fincke 00233197
3478 043343Steel BlueRAL 5011Fincke 00251197
1256 043333Steel Blue RAL 5011Fincke 00251197
3467 043344Slate GreyRAL 7015 Fincke 00235197
1258 043334Slate GreyRAL 7015Fincke 00235197
3456 043345Cadmium YellowRAL 1021Fincke 00252197
1278 043335Cadmium YellowRAL 1021 Fincke 00252197
2578 043346Reseda GreenRAL 6011Fincke 00237197
1346 043336Reseda Green RAL 6011Fincke 00237197
1567 043347Brilliant BlueRAL 5007Fincke 00245197
2348 043337Brilliant BlueRAL 5007Fincke 00245197
1356 043348Blue/LilacRAL 4005Fincke 00246197
2478 043338Blue/LilacRAL 4005Fincke 00246197
4678 043349Ocher YellowRAL 1024Fincke 00313197
1235 043339Ocher YellowRAL 1024Fincke 00313197
1248 043350Strawberry RedRAL 3018Fincke 00312197
3567 043340Strawberry RedRAL 3018Fincke 00312197
1236 043351Nut BrownRAL 8011Fincke 00272197
4578 043341Nut BrownRAL 8011Fincke 00272197
053593Mounting DeviceFor Coding-Keys
Ordering Information
Part NumberCodeNo.
ColourCoding Key
min. 0.1
ø 0.6 +- 0.05
ø 0.7 +- 0.02
RestringbreiteRestring width
Durchmesser desmetallisierten LochesDiameter of finishedplated-through hole
Bohrungsdurchmesserdes LochesDiameter of drilled hole
max. 15 µmSn / SnPb
min. 25 µm Cu
Schichtaufbau im metallisierten Loch fuer EE-KontaktMetal plating of plated-through hole for EE-contact
fuer Einpresszone D = 0.72for press-fit zone D = 0.72
Lochaufbau D=0.6Hole design D=0.6
10:1
114406