Embed Size (px)
Citation preview
Performance Data
bar g
bar g
°C
FAD* m3/min 4,18 3,49 3,04 4,85 4,18 3,49
Total input power* (P spec. - kW min/m³) kW 23,66 (5,66) 19,54 (5,59) 17,00 (5,59) 27,87 (5,74) 23,51 (5,63) 19,41 (5,56)
FAD* m3/min 4,17 3,49 3,04 4,85 4,17 3,49
Total input power* kW 25,15 (6,03) 20,85 (5,98) 18,21 (5,98) 29,56 (6,10) 24,99 (5,99) 20,72 (5,94)
FAD* m3/min 4,16 3,48 3,04 4,84 4,16 3,48
Total input power* kW 26,69 (6,41) 22,20 (6,37) 19,43 (6,39) 31,32 (6,47) 26,52 (6,37) 22,06 (6,33)
FAD* m3/min 4,16 3,48 3,04 4,84 4,16 3,48
Total input power* kW 27,49 (6,61) 22,89 (6,58) 20,05 (6,60) 32,23 (6,66) 27,32 (6,57) 22,74 (6,54)
FAD* m3/min 3,48 3,03 4,15 3,48
Total input power* kW 23,59 (6,79) 20,68 (6,82) 28,15 (6,78) 23,44 (6,75)
FAD* m3/min 3,46 3,02 4,14 3,46
Total input power* kW 25,05 (7,23) 21,95 (7,27) 29,87 (7,21) 24,89 (7,19)
FAD* m3/min 3,45 3,01 4,13 3,45
Total input power* kW 26,52 (7,68) 23,24 (7,73) 31,61 (7,65) 26,35 (7,64)
FAD* m3/min 3,00 3,44
Total input power* kW 24,56 (8,20) 27,80 (8,08)
FAD* m3/min 2,99 3,44
Total input power* kW 25,89 (8,66) 29,23 (8,50)
FAD* m3/min 2,98 3,44
Total input power* kW 27,23 (9,12) 30,65 (8,92)
Total input power at no load, fan switched off kW
Male rotor speed rpm
Approx discharge temperature of air above ambient °C 8 7 7 6 5
5 bar
6 bar
7 bar
7,5 bar
10,1 8,6 7,2
3520 2945 2577 4108 3520 2945
30/05/2012
10 13
Minimum working pressure 5,0
Ambient temperature - min/max 1 to 45
Maximum working pressure 7,5 10 13 7,5
L23 - 26 A 50Hz
L23-7,5 A L23-10 A L23-13 A L26-7,5 A L26-10 A L26-13 A
TIS L23-L26/10/CE
Technical Information Sheet V1
Fixed Speed, Air Cooled, CE Version
8 bar
9 bar
10 bar
11 bar
12 bar
13 bar
8,6 7,2 6,3
5Approx. discharge temperature of air above ambient °C
Free field noise level ** dB(A)
Electrical Data
kW
A
%
rpm
kW
mm2
A
Cooling Data
m3/min
%
mm
mm
°C
Pa
Weights, Dimensions and Capacities Data
l
mg/m3
kg
mm* Data measured and stated in accordance with ISO1217 4rd Edition Annex C and at the following conditions: Air Intake Pressure: 1 bar a / 14.5 psia Air Intake Temperature: 20°C / 68°F Humidity: 0% (dry)** Measured in free field conditions in accordance with the ISO 2151, tolerance ± 3dB(A). CompAir policy is one of continuous improvement and we therefore reserve the right to alter specifications without prior notice.*** max.30°C / max. 50m / Copper
Compr. air delivery connection (male screwed thread) EN 10226-1 R 1 1/4 (DIN 2999-R 1 1/4)
650 677
Package dimensions L x W x H 1345 x 880 x 1612
Approx. cooling air temp. above ambient (at max. power) 19 20
90 / 70 80 / 60
Weight
Max. allowable pressure drop in duct (at ambient 35°C / 45°C)
Compressor oil capacity 15
Oil carry over < 3
Heat rejected by ventilating fan (max. % of actual input power) 95
Size of cooling air inlet aperture 595 x 548
Size of cooling air outlet aperture 888 x 372
4G50 / 4G16
100 / 50 125 / 63
Ventilating fan capacity 73 81
Suggested cable size at 230V / 400V ***
Suggested fuse rating at 230V / 400V ( type gG )
4G35 / 4G10
68
Nominal motor rating 22 26
8 7 7 6 5
Drive motor speed
Fan motor rating
Starting current (max. % of full load current) 250
Standard drive motor detail (ECA Qualifying) IP55 (IE-3) - IEC 60034-2-1
3000
0,56 (IP-54)
Nominal voltage [tolerance] (Frequency) 230V[±10%] ; 400V[±10%] (50 Hz)
Full load current max. at 230V / 400V 83 / 48 97 / 56
5
67
