Company Confidential. ©2010 Nokia 1

1

A-Cover Assy# Part Material

--- Acover co-mold assy NA

1 Acover metal frame 30x

2A-Cover Co-Molded Blank

Option 1: EXL 1414 Option 2: 9% GF PC

3 Custom screw inserts (5 x) (welded)

4 Mic 1 mesh and gasket assy

5 Screw inserts (4x) (1.4 screw)

6 Display connector gasket (Not shown)

7 Display window adhesive (Not shown)

8 Earpiece gasket (Not shown)

3

4

1

Notes for SuppliersNote A: Metal flange angles and length can be

modified to what is optimal for vendors process.

Note B: Part # 5 inserts will be heat stacked however insert molding is the backup plan

Note C: This geometry can be modified some to better meet what is optimal for vendor process

25 See Note B

See Note A

See Note C

Company Confidential. ©2010 Nokia 2

2

A-Cover Co-MoldedPART INFORMATION

PLASTIC

Black

Option 1: EXL 1414

Option 2: 9% GF PC

METAL 0.3 SUS 30X

CLASS 1 SURFACE

CMD – Polish Plastic, Black 76701 90% gloss

ADDITIONAL PROCESSES

TBD

Notes for SuppliersNote A: Provide recommendations for

plastic/metal bonding process and geometry. One area is shown however spacing and hole size and shape can be modified to vendors optimal process.

Note B: Provide design recommendations to reduced flatness and warping issues

Class 1 is all outside surfaceSee Note A

Company Confidential. ©2010 Nokia 3

3

Display gasketPART INFORMATION

Poron + adhesive

Notes for SuppliersGasket will be assembled in Nokia factory

to display, however it is beginning consider to assemble into Acover with some design changes to metal frame.

Company Confidential. ©2010 Nokia 4

Cross section in some critical areas.

Company Confidential. ©2010 Nokia 5

Cross section in some critical areas.