Embed Size (px)
Citation preview
Company Confidential
Pike – P4381
Mechanics Components for RFQBased on 11th of March 2010
1 © 2010 Nokia PikeInfo / 2010-03-11/mgollnit
This material, including documentation and any related computer programs, is protected by copyright controlled by Nokia. All rights are reserved. Copying, including reproducing, storing, adapting or translating, any or all of this material requires the prior written consent of Nokia. This material also contains confidential information, which may not be disclosed to others without the prior written consent of Nokia.
Company Confidential
CMD Intend
Company Confidential
Touch Window Assy
A cover Assy
LCD Module
UI Flex Assy
Slider Module Assy Numerical Keymat Assy
C Cover Assy
Antenna Module Assy
Battery
D Cover Assy
Function Keymat Assy
Main Assy overviewPWB engine Assy
Company Confidential
RFQ Relevant Assemblies and Target Cost*
1.A-Cover assy Target Cost: 1,80€
2.Slide module assy Target Cost: 1,46€
3.Antenna Module assy (GSM) Target Cost: 0,65€
4.C-Cover assy Target Cost: 2,15€
5.Function Key Mat Assy Target Cost: 0,35€
6.Numerical Key Mat Assy Target Cost: 0,97€7.BT and WLAN Antenna Assy Target Cost: 0,30€8.Shielding Target Cost: 0,24€
* Inclusive SOT
This RFQ material is only to be used for quotation. The design shown here will most likely be updated from now until the file release. Please see specific details in the CAD files if needed for doing the quotation.
Company Confidential
1
12
3
4
56
78 9
1.) A Cover Assy
Components for RFQ Material
Thickness [mm]
Surface finish
Assembly method
1. A –Cover Trim Adhesive TBF 0.1
2. A-Cover Trim SUS 0.3 Polished, PVD coated, High gloss
Thermobonding
3. Display Window Protective Film
PET foil 0.068
4. Touch Window Assy Lens + ITO
0.8+0.35 n/a for quote
5. Display Window Adhesive 0.15
6. Earpiece Mesh Adhesive + Net
0.05+0.05
Matt
7. A-Cover Blank PC/ABS C1200HF
8. Earpiece Gasket Adhesive + Poron
0.05+0.5
9. A-Cover Blank Metal Insert SUS304 3/4H
0.3 n/a for quote
10. Display Window Gasket Poron92-25031
0.79+0.05
10
Company Confidential
2.) Slider Module Assy
17
4
Please refer 3D file to get
more info about the parts
geometry.
3
8
5
9
1011
12
13
1415
16
17
18
6
2
Company Confidential
Component for RFQ Material Thickness [mm]
Surface finish Assembly method
1. Display 2.6inch 1.9
2. Earpiece frame metal SUS 304 ½ H 0.2 With adhesive
3. Earpiece frame adhesive 0.05 Manual
4. Earpiece Nokia appointed 2.25 Snap by its frame
5. UI Flex Assy With adhesive
6. Slide module Assy
7. LCD Frame Grounding Spring
SUS 301 ½ H 0.15mm
0.15 Laser welding
8. LCD Conductive adhesive
? 0.15 Manual
9. LCD Frame SUS 304 ½ H 0.4 Laser welding
10. Moving Plate SUS 304 ½ H 0.5
11. Bumper POM Heat stack
12. Spring ? 0.4 Gold plated Rivet
13. Screw Nut -1 2 Laser welding
14. Support Plastic PC Heat stack
15. Flex Conn Protective Lid
SUS 304 ½ H 0.1 Laser welding
16. Screw Nut-2 2 Laser welding
17. Base Plate SUS 304 ½ H 0.5
18. Plastic Rail POM CSM5 concept to reduce Free play
2.) Slide Module Assy
Company Confidential
3.) Antenna Module Assy
Component for RFQ
MaterialThickness [mm]
Surface finish Assembly method
1. IHF Gasket Front
2. Speaker Nokia appointed
3. Speaker Gasket
4. Antenna Box PC+ABS 1.0
5. Antenna Flex
6. IHF Gasket Back
1 23 4
6
5
Company Confidential
4.) C -Cover Assy
1
234
56
7
8
1011 12 13 14 15 16
17
18
9*
19*
Note: Differing to the exploded view the red circled area on the C-cover should be NCVM coated. If this cause an additional part, pls quote as described in item #19
* This parts are not in the current 3D data’s implemented
Company Confidential
Component for RFQ Material Thickness
[mm]
Surface finish Assembly method /Note
1. C Cover PA GF50 1.0 double painting, matt
2. AV Jack Nokia appointed 5469980
3. Camera Gasket Rogers 4790-90-12030-04 + Adhesive
4. Battery Cover GND Spring (x 4)
SUS301 1/2 H 0.15
5. Release Button Spring Wire SUS301 1/2H D=0.5
6. IHF Mesh Saatifil Acoustex + Adhesive
7. C-Cover Insert Nut (x 2) M1.6*2
8. Release Button PC EXL 1414 painted, matt color matched to C-Cover
9. SD Card Door PC/ABS + TPU painted, matt Color matched to C-Cover
10. Camera Key PC/ABS + TPU crome + ink filled logo
11. Lock Key PC/ABS + POM painted, matt color matched to C-Cover
12. SIM Holder Assy SUS301 3/4H T=0.20 + WireSUS304 3/4 D=0.6
13. Volume Key PC/ABS + TPU painted, matt color matched to C-Cover
14. Camera Window Adhesive
0.1
15. Camera Window PMMA double sided IMD two colors
16. Flash Limestone Nokia appointed
17. Flash Limestone Adhesive
0.1
18. DC Jack Nokia appointed
19. Decoration Cap PC/ABS crome , NCVM Color matched to the D-Cover
4.) C -Cover Assy
Company Confidential
5.) Function Key Mat Assy
Component for RFQ
Material
Thickness [mm]
Surface finish Assembly method / Note
1 Function keycap PC crome, back printed lasered artwork
2 Function key rubber PC+silicon
1 2
CMD Intend
Company Confidential
6.) Numerical Key Mat AssyComponent for RFQ Material Thickness
[mm]Surface finish
Assembly method / Note
1 Numerical keycap
PC 0.25MM back printed
Matt top surface ?
With vertical ribs
2 Key separater ribs
PET ?
3 Metal grid SUS 0.15mm
4 Rubber Silicon Co-molded to metal grid
5 Key mat frame POM back printed
High loss
1
2
3
4
5 CMD Intend
Company Confidential
7.) D Cover Assy
Component for RFQ
Material Thickness [mm]
Surface finish
Assembly method / Note
1. D Cover GasketPoron 4790-92-12059+Tesa 4983
2. D CoverSUS304,1/2H
0.5 Polished, PVDNokia logo recessed,
Hooks are leaser welded to the cover
12
Company Confidential
8.) BT & WLAN Assy (no detailed information available)
Component for RFQ
Material Thickness [mm]
Surface finish
Assembly method / Note
1. Antenna carrierPC/ABS
2. Antenna Flex bonded to carrier
Company Confidential
9.) Shielding
12
Component for RFQ Material Thickness [mm]
Surface finish
Assembly method / Note
1 Linko A SUS 12,0x9,5 1 pcs shielding
2 Linko B SUS 11,5x17,0 1 pcs shielding
3 Linko C SUS 11,5x9,5 1 pcs shielding
4 BB Shield SUS 36,5x23,0 2 pcs shielding
5 Flash Driver Shield
SUS 7,8x4,4 2 pcs shielding
1
2
3
4
5
