Bureau Veritas Italia S.p.A. Viale Monza, 261 – 20126 MILANO – Doc. n° M29062/12/MC/mc IT FILE 12.IT.1211801.138 Pag.1/1

DESIGN-EXAMINATION STATEMENTOF COMPONENT PART

OF PRESSURE EQUIPMENT

Bureau Veritas Italia S.p.A. certifies that the design-examination, performed on component part

PASSO D’UOMO DN 500 6 TIRANTI type designations

14.70.00 manufactured by

NORMEC S.r.l.Via IV Novembre – 12050 Castagnito (CN)

ITALY

according to the drawing n° 14.70.00.C Rev.0 and to the calculation n° 072-12 Rev.0to be in compliance with the requirements of the standards EN 13445-3 with the field of

application

Design Pressure (PS) : 3,5 bar (g)

Design Temperature (TS) : –50 / +120 °C

and to be in compliance with the requirements of the standard EN 14025 with the field

of application

Maximum Working Pressure (MWP) : 3,5 bar (g)

Test Pressure (ptest) : 5,4 bar (g)

Design Temperature (TS) : –50 / +120 °C

fulfils the relevant essential safety requirements of the Annex I of the Directive

97/23/EC in order to be incorporated to a pressure equipment (ref. guideline 1/22 WGP)

and the requirements of chapters 6.7/6.8 of the European Agreement concerning the

International Carriage of Dangerous Goods by Road (ADR) and by Rail (RID). At Milan, 29st March 2012

Mirko Corsini Bureau Veritas Italia S.p.A.