ComRent LineCard 112612 low res

Load Bank Equipment Specialists With 20 strategically located centers and

North America’s largest inventory – over

2,500 pieces of equipment and 90 miles

of cable – ComRent can meet a wide

variety of load requirements, regardless

of your industry and testing objectives.

Not only do we have more load banks,

cables, switchgear and transformer

equipment in our rental fleet than any

other company in North America, we

also have more experience. To date,

we have provided load banks, cables,

transformers switchgear and technical

support for over 30,000 load bank tests,

with a 99.99% on site performance

record. And with 18 strategically located centers, we’re only a few hours away from

any commissioning or testing project.

Medium Voltage Load Banks ComRent is the only load bank rental

company that has medium voltage load

banks, plus resistive and reactive testing

solutions, for the most accurate and

complete generator load bank testing.

We also test our load banks before we

deliver them to a customer’s site and test

them when they come back to our facility

to ensure reliability on the job.

Unrivaled service and supportComRent proves our commitment to our

load bank rental clients every day with

our 24/7, 365-day customer support.

We build a relationship with our clients

before, during, and after the load bank

commissioning project. You can always

count on ComRent to go above and

beyond simply meeting your load bank

rental requirements because we want to

be your trusted partner. The bottom line:

there’s no better or more experienced

company in the business. Guaranteed.

Which load bank is right for your project? We can help.Browse our load bank equipment

showcase, then contact a ComRent load

bank specialist to discuss your project’s

requirements. If you’re not sure which

type of load bank is right for your testing

or commissioning project and have

questions, or if you can’t find what you

need, the full catalog is available on the

web site. Don’t hesitate to contact us for

input and guidance. After all, that’s what

partners are for.

For More InformationTo learn more about our services and

how we can help you achieve your

testing objectives more efficiently,

please contact us at 888.881.7118 or

email us at [email protected] or visit

www.comrent.com.

ComRent International Headquarters7640 Investment Court, Unit A • Owings, MD 20736

(888) 881-7118www.comrent.com

Global Leader in Load Bank Rentals and Service

Accessories Voltloc® Cable• Medium voltage

power cable system

• Designed for testing portable substations, temporary generator switchgear, temporary MV feeders, and load bank testing

• 15kV class, 100% type SH EPR insulation

• Adapter for indoor/outdoor copper bus, 200 load break elbow, and 200/600 amp dead break elbow

Camlock Cable• Premium-grade 90 degree

EPDM insulated 50’ cable• Designed for testing UPS,

CATV/broadband, telecom, and power utility

• 1/0 cable rated at 265 amps; 4/0 cable rated 405 amps

• Withstands severe environmental conditions

ComRent® CxMonitor• Monitor power quality,

temperature, and humidity in a single device

• Designed to work with Wi-fi, Ethernet, and USB interfaces

• Advanced data collection, storage, and reporting capabilities

• 5 current channels and 10 voltage channels

Daycore® Superb Corona Camera• Pinpoints corona

location and detects electrical leakage

• Designed for predictive maintenance tasks in OH transmission lines, substations, and other non-foot patrol functions

• UV sensitivity of 3x10-18 watt/cm2



What We TestComRent is your single source for electrical and thermal load testing. Load Bank Testing is the most flexible testing method to validate the operating condition and output of diesel and gas turbine generators, UPS, batteries, and CRAC systems.Look to us for:• Resistive Load Tests – Mimics the operational load that

a power source will see in the actual application• Reactive Load Tests – Provides a lagging load to

accurately simulate electric motor and pump function• Capacitive Load Tests – Provides a leading power factor

to compensate for power factor correction on the utilityThe bottom line: ComRent can test any load from 50MW to less than 1kW at low or medium voltage.

Load Bank Guidewww.comrent.com

ComRent® CRLS 11.5• Rack-mountable load bank• Designed to create true hot-aisle/

cold-aisle, heat and air flow• 2 channels, 1 input per channel• Operates at independent

voltages• 4.5 kW @ 120VAC • 8.5 kW @ 208VAC • 10.5 kW @ 230VAC• 11.5 kW @ 240VAC

ComRent® LPH 100 “Freedom”• Portable, self-contained, high

capacity load bank• Designed for testing and

maintenance of indoor emergency generators and UPS systems

• Large load capacity – up to 100kW

• 100 kW @ 480VAC• 93.75 kW @ 240VAC

ComRent® LPH 200/ LPH 400 “Millennium”• Portable, self-contained high

capacity load bank• Designed for ease of load

testing at multiple sites• Large load capacity – up to

400kW• 400 kW @ either 240/480VAC

or 600VAC

ComRent® LPV700 “Patriot”• Portable and easy to transport

and operate at multiple sites• Designed for testing diesel

generating systems at remote sites or UPS and turbine testing on factory production lines

• Extra-large load capacity – up to 700 kW

• 700 kw at either 240/480 VAC or 600VAC

ComRent® K580• Permanently mounted on

heavy-duty trailer for highway travel

• Designed for fast, accurate testing – no cool-down period required after load operation

• Trailer accommodates up to 2,300 lbs. of additional cable and equipment weight

• 1250 kW @480VAC• Load steps: 50, 100, 200, 200,

200, and 500 kW

ComRent K975 • Easy operator controls and

remote operation available up to 1000’

• Horizontal air discharge• 480 volt 3phase operation

operation• Available in 1500, 2000, or

2500 kW load capacity

Resistive Load Banks Reactive Load Banks

ComRent® K596• Portable reactive load bank

intended as a companion to the K595 portable resistive load bank

• Provides a 0.8 power factor at 60Hz when used with the K595 unit

• Configured in a four-wire wye circuit, which allows use in single-phase load testing applications

• Provides 40.5kVAR to complement the 54kW rating of the K595

ComRent® K841B• Load step resolution sized to

match resistive load bank steps to obtain 0.8 PF

• Suitable for indoor or outdoor operation, portable

• Designed for continuous operation

• Non-saturating single-phase and 3-phase iron core reactors

• 750 and 1125 kVAR models

ComRent® R450• Portable 450kVAR inductive

load banks• Designed to provide loads

which can be used to obtain a lagging power factor

• Full capacity at both 50 and 60Hz, 400Hz capability optional

• Fused, contractor controlled load steps

ComRent® K841• Portable and capable of

continuous operation• Designed to be used in

conjunction with a resistive load bank for testing generators and UPS systems at less than utility power factor

• Available in balanced 3-phase loads of 150, 188, 191, 225, 228, 300, and 375kVAR at 240 or 480 volts

• Available with different size load steps, depending on customer requirements


with rugged enclosure for multiple site load testing

• Designed for testing turbines, generators, switchgear

• Used in parallel with the K557 load bank to achieve a 0.8 power factor load

• Total load: 3750kVAR, 480VAC, 60Hz

Medium Voltage Load Banks

ComRent® CR922A• Custom engineered portable

medium voltage resistive 5MW load bank for outdoor use

• Designed for testing medium voltage generators, substations, wind farms, ship engines, medium-voltage switchgear

• Total load capacity: 5MW, 13,800V, 3-phase, 60Hz and 4MW, 4160V, 3-phase, 60Hz

• Operates at lower voltages with standard voltage derating

ComRent ® CR922B• Custom engineered portable


• Designed to be paired with the ComRent® CR922A to test up to 50MW @ 13,800V



ComRent® CR3750• Portable reactive load bank for

tests requiring a power factor of 0.8 at 5 and 15kW class voltages

• Designed to be used in parallel with the CR922 resistive load bank to achieve a 0.8 power factor load

• Designed for testing turbines, generators, switchgear, utility, grids, and substations

ComRent® TORKEL 860• Portable unit that can be linked

together with two or more TORKEL 860 units for higher current testing

• Designed for maintaining battery systems having two different voltages in power plants and transformer substations

• Used for battery systems ranging from 12 to 480V and discharging up to 110 A

ComRent® L42• Portable and can be shipped

overnight anywhere in North America or internationally

• Designed for field servicing and testing batteries, power supplies, and telecom power plants

• Load can be adjusted from 0-500 amps

• Meters: 0-75 V voltmeter, 0-500 A ammeter


overnight anywhere• Designed for field testing

batteries, power supplies, and telecom power plants


• Load steps: 100, 100, 100, 100 amp fixed steps; 0-100 amps adjustable step


ComRent L121• Portable and can be shipped


• Designed for field testing substation and switchgear battery systems, rectifier chargers, and UPS batteries


• Load steps: 0-125 amps adjustable; 125 amps fixed


ComRent® K492• Portable and lightweight

contained in a small enclosure• Designed for testing 26/52VDC

power supplies, batteries, DC generators, and alternators

• Up to 150 amps loading capacity for testing at either 24, 26, 28, 48, or 52 volts DC

• Over-temperature protected – removes loads if overheating occurs

ComRent® CR 600• Portable, self-contained, high

capacity unit for multiple site load testing

• Designed for testing battery and rotor UPS, high capacity battery strings, DC motors, generators, power supplies

• Up to 1000 amps at 300VDC (300 kW) and 600VDC (600 kW)


ComRent® I-Line Multi-Panel• Flexible multi-panel power

distribution system• Designed to enable easy addition

and subtraction of circuit breakers in the field

• Panelboard: 1200 amp main bus• 5W cam-type input receptacles with

snap-back covers

ComRent® 2500-3500 5000/ 7000kVA Transformers• Transformers with multi-tap

configuration: wye-wye, delta-wye

• Designed for medium voltage load tests, transformer replacements, and temporary power generation and distribution

• Input voltage: 2400-14400; output voltage: 480VAC or 600VAC

• 50 and 60Hz voltage taps

Power Distribution

DC Load Banks

ComRent® CR3.3• Portable, ultra compact,

completely weatherproof load bank for outdoor testing

• Designed to test turbines, switchgear, rotary UPS, generators, and UPS systems

• Adjustable resistive only or PF to 0.8

• 1kW and 1kVAR min. load steps



• Easy operator controls with laptop computer or handheld controller



• 1kW and 1kVAR minimum load steps

Resistive/Reactive Load Banks

To download our full catalog, visit us at www.comrent.com To download our full catalog, visit us at www.comrent.com

ComRent® CRLS 11.5• Rack-mountable load bank• Designed to create true hot-aisle/

cold-aisle, heat and air flow• 2 channels, 1 input per channel• Operates at independent

voltages• 4.5 kW @ 120VAC • 8.5 kW @ 208VAC • 10.5 kW @ 230VAC• 11.5 kW @ 240VAC

ComRent® LPH 100 “Freedom”• Portable, self-contained, high

capacity load bank• Designed for testing and

maintenance of indoor emergency generators and UPS systems

• Large load capacity – up to 100kW

• 100 kW @ 480VAC• 93.75 kW @ 240VAC

ComRent® LPH 200/ LPH 400 “Millennium”• Portable, self-contained high

capacity load bank• Designed for ease of load

testing at multiple sites• Large load capacity – up to

400kW• 400 kW @ either 240/480VAC

or 600VAC

ComRent® LPV700 “Patriot”• Portable and easy to transport

and operate at multiple sites• Designed for testing diesel

generating systems at remote sites or UPS and turbine testing on factory production lines

• Extra-large load capacity – up to 700 kW

• 700 kw at either 240/480 VAC or 600VAC

ComRent® K580• Permanently mounted on

heavy-duty trailer for highway travel

• Designed for fast, accurate testing – no cool-down period required after load operation

• Trailer accommodates up to 2,300 lbs. of additional cable and equipment weight

• 1250 kW @480VAC• Load steps: 50, 100, 200, 200,

200, and 500 kW

ComRent K975 • Easy operator controls and

remote operation available up to 1000’

• Horizontal air discharge• 480 volt 3phase operation

operation• Available in 1500, 2000, or

2500 kW load capacity

Resistive Load Banks Reactive Load Banks


intended as a companion to the K595 portable resistive load bank

• Provides a 0.8 power factor at 60Hz when used with the K595 unit

• Configured in a four-wire wye circuit, which allows use in single-phase load testing applications

• Provides 40.5kVAR to complement the 54kW rating of the K595

ComRent® K841B• Load step resolution sized to

match resistive load bank steps to obtain 0.8 PF

• Suitable for indoor or outdoor operation, portable

• Designed for continuous operation

• Non-saturating single-phase and 3-phase iron core reactors

• 750 and 1125 kVAR models

ComRent® R450• Portable 450kVAR inductive

load banks• Designed to provide loads

which can be used to obtain a lagging power factor

• Full capacity at both 50 and 60Hz, 400Hz capability optional

• Fused, contractor controlled load steps

ComRent® K841• Portable and capable of

continuous operation• Designed to be used in

conjunction with a resistive load bank for testing generators and UPS systems at less than utility power factor

• Available in balanced 3-phase loads of 150, 188, 191, 225, 228, 300, and 375kVAR at 240 or 480 volts

• Available with different size load steps, depending on customer requirements


with rugged enclosure for multiple site load testing

• Designed for testing turbines, generators, switchgear

• Used in parallel with the K557 load bank to achieve a 0.8 power factor load

• Total load: 3750kVAR, 480VAC, 60Hz

Medium Voltage Load Banks

ComRent® CR922A• Custom engineered portable


• Designed for testing medium voltage generators, substations, wind farms, ship engines, medium-voltage switchgear



ComRent ® CR922B• Custom engineered portable


• Designed to be paired with the ComRent® CR922A to test up to 50MW @ 13,800V



ComRent® CR3750• Portable reactive load bank for

tests requiring a power factor of 0.8 at 5 and 15kW class voltages

• Designed to be used in parallel with the CR922 resistive load bank to achieve a 0.8 power factor load

• Designed for testing turbines, generators, switchgear, utility, grids, and substations

ComRent® TORKEL 860• Portable unit that can be linked

together with two or more TORKEL 860 units for higher current testing

• Designed for maintaining battery systems having two different voltages in power plants and transformer substations

• Used for battery systems ranging from 12 to 480V and discharging up to 110 A



• Designed for field servicing and testing batteries, power supplies, and telecom power plants




overnight anywhere• Designed for field testing

batteries, power supplies, and telecom power plants


• Load steps: 100, 100, 100, 100 amp fixed steps; 0-100 amps adjustable step


ComRent L121• Portable and can be shipped


• Designed for field testing substation and switchgear battery systems, rectifier chargers, and UPS batteries


• Load steps: 0-125 amps adjustable; 125 amps fixed


ComRent® K492• Portable and lightweight

contained in a small enclosure• Designed for testing 26/52VDC

power supplies, batteries, DC generators, and alternators

• Up to 150 amps loading capacity for testing at either 24, 26, 28, 48, or 52 volts DC

• Over-temperature protected – removes loads if overheating occurs

ComRent® CR 600• Portable, self-contained, high

capacity unit for multiple site load testing

• Designed for testing battery and rotor UPS, high capacity battery strings, DC motors, generators, power supplies



ComRent® I-Line Multi-Panel• Flexible multi-panel power

distribution system• Designed to enable easy addition

and subtraction of circuit breakers in the field

• Panelboard: 1200 amp main bus• 5W cam-type input receptacles with

snap-back covers

ComRent® 2500-3500 5000/ 7000kVA Transformers• Transformers with multi-tap

configuration: wye-wye, delta-wye

• Designed for medium voltage load tests, transformer replacements, and temporary power generation and distribution

• Input voltage: 2400-14400; output voltage: 480VAC or 600VAC

• 50 and 60Hz voltage taps

Power Distribution

DC Load Banks





• 1kW and 1kVAR min. load steps



• Easy operator controls with laptop computer or handheld controller



• 1kW and 1kVAR minimum load steps

Resistive/Reactive Load Banks

To download our full catalog, visit us at www.comrent.com To download our full catalog, visit us at www.comrent.com

Load Bank Equipment Specialists With 20 strategically located centers and

North America’s largest inventory – over

2,500 pieces of equipment and 90 miles

of cable – ComRent can meet a wide

variety of load requirements, regardless

of your industry and testing objectives.

Not only do we have more load banks,

cables, switchgear and transformer

equipment in our rental fleet than any

other company in North America, we

also have more experience. To date,

we have provided load banks, cables,

transformers switchgear and technical

support for over 30,000 load bank tests,

with a 99.99% on site performance

record. And with 18 strategically located centers, we’re only a few hours away from

any commissioning or testing project.

Medium Voltage Load Banks ComRent is the only load bank rental

company that has medium voltage load

banks, plus resistive and reactive testing

solutions, for the most accurate and

complete generator load bank testing.

We also test our load banks before we

deliver them to a customer’s site and test

them when they come back to our facility

to ensure reliability on the job.

Unrivaled service and supportComRent proves our commitment to our

load bank rental clients every day with

our 24/7, 365-day customer support.

We build a relationship with our clients

before, during, and after the load bank

commissioning project. You can always

count on ComRent to go above and

beyond simply meeting your load bank

rental requirements because we want to

be your trusted partner. The bottom line:

there’s no better or more experienced

company in the business. Guaranteed.

Which load bank is right for your project? We can help.Browse our load bank equipment

showcase, then contact a ComRent load

bank specialist to discuss your project’s

requirements. If you’re not sure which

type of load bank is right for your testing

or commissioning project and have

questions, or if you can’t find what you

need, the full catalog is available on the

web site. Don’t hesitate to contact us for

input and guidance. After all, that’s what

partners are for.

For More InformationTo learn more about our services and

how we can help you achieve your

testing objectives more efficiently,

please contact us at 888.881.7118 or

email us at [email protected] or visit

www.comrent.com.

ComRent International Headquarters7640 Investment Court, Unit A • Owings, MD 20736

(888) 881-7118www.comrent.com


Accessories Voltloc® Cable• Medium voltage

power cable system

• Designed for testing portable substations, temporary generator switchgear, temporary MV feeders, and load bank testing

• 15kV class, 100% type SH EPR insulation

• Adapter for indoor/outdoor copper bus, 200 load break elbow, and 200/600 amp dead break elbow

Camlock Cable• Premium-grade 90 degree

EPDM insulated 50’ cable• Designed for testing UPS,

CATV/broadband, telecom, and power utility

• 1/0 cable rated at 265 amps; 4/0 cable rated 405 amps

• Withstands severe environmental conditions

ComRent® CxMonitor• Monitor power quality,

temperature, and humidity in a single device

• Designed to work with Wi-fi, Ethernet, and USB interfaces

• Advanced data collection, storage, and reporting capabilities

• 5 current channels and 10 voltage channels

Daycore® Superb Corona Camera• Pinpoints corona

location and detects electrical leakage

• Designed for predictive maintenance tasks in OH transmission lines, substations, and other non-foot patrol functions

• UV sensitivity of 3x10-18 watt/cm2



What We TestComRent is your single source for electrical and thermal load testing. Load Bank Testing is the most flexible testing method to validate the operating condition and output of diesel and gas turbine generators, UPS, batteries, and CRAC systems.Look to us for:• Resistive Load Tests – Mimics the operational load that

a power source will see in the actual application• Reactive Load Tests – Provides a lagging load to

accurately simulate electric motor and pump function• Capacitive Load Tests – Provides a leading power factor

to compensate for power factor correction on the utilityThe bottom line: ComRent can test any load from 50MW to less than 1kW at low or medium voltage.

Load Bank Guidewww.comrent.com

Documents

ComRent LineCard 112612 low res