Upload
lynn-jordan
View
223
Download
0
Embed Size (px)
DESCRIPTION
Portable Audio Equalizer Objectives 1. The system should have excellent sound quality. 2. The system should have easy equalization 3. The system should be of light weight 4. The system should be low cost Constraints 1. The system must be portable 2. The system will be an add-on to existing MP3 player
Citation preview
Concept Development and End Product
Description
Concept Generation
Portable Audio EqualizerObjectives1. The system should have excellent sound quality.2. The system should have easy equalization3. The system should be of light weight4. The system should be low cost
Constraints1. The system must be portable2. The system will be an add-on to existing MP3 player
Audio Equalizer
Input Amplifier
Automatic Level
controlALC
Graphic Equalizer
Single Transistor +
OPAMP
Dual OPAMP Analog Logarithmic
Amplifier
Microcontroller + variable Gain Amplifier Active Filter
Digital Filter
Pasive Filter
Analog Filter
Concept Fan
Advantages DisadvantagesLow Cost Not meany featuresEasy to Implement Low Signal to Noise ratio
Digital Filter
Graphic Equalizer
Single Transistor + OPAMP
Dual OPAMP
Analog Logarithmic
Microcontroller + variable Gain
Active Filter
Passive Filter
Input Amplifier Automatic Level control ALC
Concept Combination Table
Advantages DisadvantagesModerate Cost Fully FeaturedModerate to Implement Low Signal to Noise ratio
Digital Filter
Graphic Equalizer
Single Transistor + OPAMP
Dual OPAMP
Analog Logarithmic
Microcontroller + variable Gain
Active Filter
Passive Filter
Input Amplifier Automatic Level control ALC
Concept Combination Table
Advantages DisadvantagesModerate Cost Fully FeaturedModerate to Implement Higher Signal to Noise ratio
Digital Filter
Graphic Equalizer
Single Transistor + OPAMP
Dual OPAMP
Analog Logarithmic
Microcontroller + variable Gain
Active Filter
Passive Filter
Input Amplifier Automatic Level control ALC
Concept Combination Table
Sound Quality. Easy Equalization Light Weight Low CostSound Quality. 1 5 3 3
Easy Equalization 1/5 1 1 3Light Weight 1/3 1 1 2
Low Cost 1/3 1/3 1/2 1
1 = equal 3 = moderate 5 = strong 7 = very strong 9 = extreme
Sound Quality. Easy Equalization Light Weight Low Cost G. Mean wSound Quality. 1.00 5.00 3.00 3.00 2.59002 0.53
Easy Equalization 0.20 1.00 1.00 3.00 0.880112 0.18Light Weight 0.33 1.00 1.00 2.00 0.903602 0.19
Low Cost 0.33 0.33 0.50 1.00 0.485492 0.10Total 4.859226
totalMeanGwAAAMeanG NN
/.)(.
1
21
Concept Selection
If a contraint is NoConstraints That Option must be DiscardedMust be PortableAdd-on to existing MP3 P.
Objectives wSound Quality. 0.53 3.00 1.59 3 1.59 5 2.65 5 is Maximum
Easy Equalization 0.18 4.00 0.72 5 0.90 5 0.90Light Weight 0.19 5.00 0.95 4 0.76 4 0.76
Low Cost 0.10 5.00 0.5 5 0.50 3 0.303.76 3.75 4.61
Option 1YesYesYes
Option 2YesYesYes
Option 3YesYesYes
Concept Selection
End Product Description
Level 0 Equalizer FunctionalityAudio Input Signal
Equalizer Control Audio output Signal
Power
Module
Inputs
Outputs
Functionality
Audio Equalizer
Equalized Audio : 1V peak to peak
- Audio input: 1V peak to peak- Power 120 VAC, 60 Hz- Equalization Settings
Equalize the input audio signal to provide desired frequency content
Audio Equalizer
Level 1 Equalizer Functionality
Buffered Input Constant Amplitude Signal
Audio Input Equalized Signal
Module Audio Equalizer
Inputs
Outputs
Functionality
Repeat as necessary
Power 120 VAC, 60Hz
- Audio input: 1V peak to peak- Regulated +/- 12 VDC
- Provides high input impedance- Provides low output impedance
Low impedance buffered input
Pre AmplifierAutomatic Lecel
control (ALC) Digital Filter
Power Supply
Level 2 Equalizer Functionality
Buffered Input Signal Constant Amplitude Signal
Gain Control Output Sample
DC Voltage input
DC Voltage input
Variable GainAmplifier
Microcontroller
Embedded Systems Require additional Information
Module
Inputs
Outputs
Functionality
- Audio output sample- Regulated + 5 VDC
- Gain Control Signal
Microcontroller
StartSample Audio Output
Low Level?
Amplify Control
High Level?
Attenuate Control
Yes
YesNo
No
Continue until the next step is to place
components
Portable Audio EqualizerMarketing Requireme
ntsEngineering Requirements Justification
1, 2, 4 1. The total harmonic distortion should be <0.1%.
Based upon competitive benchmarking and existing amplifier technology. Class A, B, and AB amplifiers are able to obtain this level of THD.
2, 4 1. Should have three band equalization
Achievable with few components and very popular
3 - A 1. Weight should not exceed 1 pound
User will have to carry it while walking
Portable Audio Equalizer3-B 1.The dimensions
should not exceed 2” x 2”x 1”.
Unit will interconnect with existing equipment
4-A 1.Production cost should not exceed $15.
This is based upon competitive market analysis and previous system designs.
Objectives1. The system should have excellent sound quality.2. The system should have easy equalization3. The system should be of light weight4. The system should be low costConstraintsA. The system must be portableB. The system will be an add-on to existing MP3 player
Summarize Specs in one table
Other Deliverables Power Point Presentation Final Report User Manual etc