View
254
Download
7
Embed Size (px)
DESCRIPTION
Concrete Countertop Specialties is the first and only tooling supplier in the U.S.A. to focus solely on concrete countertop fabrication. Through hands-on experience and product knowledge, we have the answers to your questions on concrete pouring, grinding, and polishing. We have been supplying the concrete countertop fabricators from coast to coast since 2003 and look forward to helping you in the future in this unique industry.
Citation preview
866-902-7311 Toll free866-522-1817 Toll free faxconcretecountertopspecialties.comsales@concretecountertopspecialties.com
Grinders & Polishers................Grinding & Shaping Wheels...Diamond Polishing Pads........Floor Polishing.........................Diamond Core Bits.................Polishing Packages................Diamond Drum Wheels..........Buffing......................................Edge Profiling..........................Saws.........................................Diamond Blades.....................Concrete Etching...................Aggregates.............................Mixers.......................................Lifting & Handling....................Care & Repair.........................Adhesives................................Misc. Equipment.....................
178
131617212223272931323438424348
Table Of Contents
pg. 20
pg. 17
pg. 23
INDEX
II
Adhesives ................................................ 43-47Aggregates ............................................. 32-33Akemi Polyester Resin ...................................44Alpha Air 658....................................................4Alpha AWP 158 ................................................3Alpha Felt Buffing Wheels .............................22Alpha VSP 120..................................................3APEXX Router Bits ...........................................26Aprons ............................................................48Barranca BD-2321 ...........................................4Blue Diamond Grinder Tools ........................31Brazed Drums .................................................21Brazed Hard Lippage Discs ............................7Buffing ............................................................22Care & Repair ...............................................42Carry Clamps .................................................39Concrete Etching..........................................31Con-Dri Pads ..................................................10Crack Chaser ................................................30Da’Shaft Extension ........................................12Diamond Blades ..................................... 29-30Diamond Concrete Core Bits ......................16Diamond Core Bits ........................................16Diamond Drum Wheels ................................21Diamond Polishing Pads .......................... 8-12Double Row Grinding Wheel .........................7Dry Polishing Packages.................................18DS-301 ...............................................................5DS-301 Packages ..........................................20Dust Collection ................................................6DX-PRO Pads ...................................................8Eagle Turbo Blades .......................................29Edge Profiling .......................................... 23-25Flex 603 ............................................................2Flex L3709 .........................................................2Flex Planetary Polisher ....................................5Flex PLW Air 923S .............................................4Floor Polishing ......................................... 13-15Galeski Contour Cat - KS-80 .........................24GFCI Cord ........................................................6Grinders & Polishers .................................... 1-6Grinding & Shaping Wheels ...........................7Hand Mixers ...................................................37Lavina Pro Floor Polishing Machines ...........48
Lavina™ Densifier & Floor Glow ...................15Lifting & Handling .................................... 38-41Makita Cut-Off Saw ......................................28Makita DS-301 HD Polisher ..............................5Makita GDO601 .............................................31Makita Hypoid Saw .......................................27Makita PW 5001C ............................................1Master Routers ...............................................25Metabo WE14-125 ...........................................3Minuteman Portable Multimixers .................34Misc. Equipment ..................................... 48-52Mixers ...................................................... 34-37Mortarman Portable Vertical Shaft Mixers .36Mudslinger Pads ............................................10Nato™ Super Thick Pads ..............................14Ogee Aluminum Backer ...............................12Oscillating Drum Wheels ...............................21Pearl Grinder Caddy™ .................................28Polishing Packages ................................ 17-20Polishing Pads ............................................ 8-12Q4 Core Bits ...................................................16Q4 Diamond Stone Profilers .........................23Rival Cleaners ................................................42Rival Colorants ...............................................43Rival Economy Pads .......................................8Rival Resin Products ......................................43Rival Sealers ...................................................42Saws ......................................................... 27-28Self Locking Slab Trolley ................................39Shaping Wheels ...............................................7Sink Hole Saver, Concrete Edition ...............38Sleeve Protectors ..........................................48Solid Felt Buffers, GCT ...................................22Tenax Tiger Ager ............................................42Tenax Wax ......................................................22Touchstone Colorants ...................................45Touchstone Penetrating RS ..........................45Tuck Point Blade ............................................30Ultra Speed Pads .............................................8Undermount Sink Install Tool .........................52V-Harr™ Pads .................................................14Wet Polishing Packages ...............................17Work Tables, GCT ..........................................41Workman II Towable MultiMixer ...................34Zero Tolerance Wheels .................................21
III
DENvER SoLutIoN
www.denver.sm
solutionfriendly technologies
Polishing Smoothing texturing Bush-hammering Sand-blasted ... and much more!
Not oNly for polishiNg!the new frontier of the machines for every type of surface finishings.
The exclusive floating head motion, combined with the X and Y cross moments with adjustable speed, assures an excellent polish on every kind of stone.
The efficient alternative toyour manual radial arm polisher in order to save labor cost without compromising the surface polish quality.
Machine dimensions (LxWxH): 216” x 108” x 95”Table dimensions (LxP): 150” x 75”Machine weight: 4,409 lbs.
230 Volt, 3 Phase, 100 Amps500 RPM, 12.5 HP
Specs.
1 Bearings and linear guides, made of special hardened steel to ensure wear strength, with dust protection.
The springs unit system assembledon the working head ensures a good & homogeneous polish result, also on uneven surfaces. Motorized vertical travel (with safety limit switch) to adjust the tool pressure. Quick-coupling supports for abrasives.
Control panel with amperemeter, speed regulators for X and Y axes, PLC control for managing the 4 cycles in automatic mode.
2
3
3904-0090 $54,995.00Self-contained water recycling starting at:
$16,995.00
$1,295/mo.*offer subject to credit approval
Single-head, automaticmonobloc polishing machine
SoLutIoN tooLING
IV
Grit Item # Price#120 4105-0047 $40.00#220 4105-0048 $40.00#400 4105-0049 $40.00#600 4105-0050 $40.00#800 4105-0040 $40.00
#1800 4105-0041 $40.00#3500 4105-0042 $40.00#8500 4105-0043 $40.00
3904-0091 $369.00
Our premium quality FRANKFURT extra thick resin bond bricks feature a strong, long-lasting high performance resin bond. Resin segments height is 1-inch. FRANKFURT bricks are available in a complete range of grits from 50 to 8500.
FRANKFuRt Extra thick
Bricks
Denver Fast Connection Support Plate
Allows for fast changing of tooling, Aluminum, 350mm.
*optional tooling shown.
Pit Water(Before Filters)
Gray Water(After Cyclone)
Crystal Clear Water(After Hurricane Filters)
Call today to get a cost effective way to filter your water!
Call today to get a cost effective way to filter your water!
ebbcowaterfi l tration.com
Super Joint System (SJS) helps prevent gear damage
pg. 6
1
GRINDERS & PoLISHERS
Makita - 9565Cv variable Speed 5” Angle Grinder
Includes: 5” grinding wheel, Side handle, Wheel guard, Inner flange, Lock nut and Wrench.
• Grinding Wheel - 5”• Wire Cup Brush - 3”• Sanding Disc - 5”• 2,800-10,500 RPM• 120 Volts, 12 Amps• Spindle Thread - 5/8”-11• Overall Length - 11-3/4”• Net Weight - 4.0 lbs.
• GFI Protected• Speed: 2,000 - 4,000 RPM • 120 Volts, 7.9 Amps
Makita - PW5001C 4”variable Speed Wet Stone Polisher
• Spindle Thread: 5/8 - 11”• Overall Length: 12-1/4” • Net Weight: 4.6 lbs.
Makita - 9227C 7” Polisher/Sander
1 Year LimitedWarranty
1 Year LimitedWarranty
1 Year LimitedWarranty
BESTSELLER
Carbon BrushSET
Includes: Head cover, & wrench
• Sanding Disc 7" • Wool Bonnet 7" • No Load RPM 600-3,000 • 120 Volts, 10 Amps
Includes: Hook-and-loop pad, hex wrench, hoop handle, & side handle
• Spindle Thread: 5/8”-11• Overall Length: 18-1/2" • Net Weight: 6.6 lbs.
Carbon BrushSET
Carbon BrushSET
1909-0108 $169.003904-0055 $11.25
1909-0079 $279.953904-0055 $11.25
1909-0017 $229.001918-0097 $10.50
1 Year LimitedWarranty
1 Year LimitedWarranty
1 Year LimitedWarranty
1 Year LimitedWarranty
1 Year LimitedWarranty
GRINDERS & PoLISHERS
2
FLEX - LW1503 5” Angle Polisher FLEX -LW603vR 5” variable Speed Angle Polisher
5/8”-11 threaded spindle 5/8”-11 threaded spindle
Lightweight, yet very powerful, known for its durability. 3,700 RPM, 5” disc capacity, 120V-7.8 Amps, Weight: 4.4 lbs., Comes with wrench and built in GFI.
Heavy duty and very powerful. Great for both diamond and silicon carbide wheels. 120V - 13 Amps. Weighs 7.5 lbs. Variable speed from 1,000 - 2,800 RPM. Comes with wrench and built in Ground Fault Interrupter.
Carbon Brush
• 5” Heavy duty 120V • 11 Amp motor with overload protection and soft start.
FLEX - L1506vR 5” Angle Grinder FLEX- L3410vRG 5”variable Speed Angle Grinder
5/8”-11 threaded spindle
• 120V 10 Amp Motor• Hand adjustable blade guard • 3,000-11,000 speed
5/8”-11 threaded spindle
Carbon Brush
Carbon BrushCarbon Brush
• Ergonomic design• Tough handle wrench
• Variable speed from 2,200 - 6,500 RPM. • Weighs 4.2 lbs.
2 frEE grinding Wheels
with l3709 grinder purchase!
while supplies last.
5” Heavy duty. 120V - 7 Amps. 11,000 RPM. Weighs 4.2 lbs.
1909-0178 $59.95
FLEX - L3709 5” Angle Grinder
5/8”-11 threaded spindle
*
*Free Flex L3709 with orders over $1,000, while supplies last.
1909-0019 $249.001918-0018 $5.94
1909-0028 $397.0099-765-0104 $6.00
1909-0013 $199.001918-0018 $5.94
1909-0084 $169.0099-765-0057 $10.50
1 Year LimitedWarranty
The VSP-120 comes with variable speed control switch with an automatic speed feed-back system to maintain consistent RPMs with or without a load. This switch has also expanded the usable RPM range. The new RPM range reduces heat build-up when polishing Engineered Stone, which eliminates burning or scorching the work piece. Alpha® has also added a Splash Guard that can be trimmed to adjust the height for the best comfort and protection. Every stone fabricator should try the VSP-120 variable speed wet polisher to achieve the best performance and high quality results.
1 Year LimitedWarranty
3
GRINDERS & PoLISHERS
MEtABo PE12-175 7” variable Speed Angle Polisher
• 5/8”-11 threaded arbor• Pad Diameter 7”• Extremely high torque, 124 inch lbs.• Auto-stop carbon brushes• No-load speed: 700-2,200 RPM• Power: 10 Amps, 120V• Spindle thread: 5/8”-11• Tool weight: 5.9 lbs.
Included Equipment:• Heavy duty carrying case• Ground Fault Circuit Interrupter• Water valve and hose• Faucet/garden hose adaptor• Wrench• C-Handle• Reversible side handle• Rubber coated electronics• Extra carbon brush set• Caster assembly
The Alpha AWP-158 Electric Polisher is designed for portable polishing, shaping and light grinding. A center water feed permits wet polishing which helps to reduce dust, extend disc life and gives you a great polish. For your safety, the unit is double insulated and has an installed Ground Fault Circuit Interrupter.
Motor: 110V/7.8 Amps Speed: 3,000 RPMWeight: 6 lbs.Spindle: 5/8”-11
ALPHA - AWP-158 5” Electric Polisher
180 Day Limited Warranty
Carbon BrushSET
ALPHA - vSP-120 5” variable Speed Electric Polisher
90 Day Limited Warranty
MEtABo WE14-125 vSElectric Angle Grinder
• 120V Volt• No Load Speed: 3,000 - 10,000 RPM • Grinding disc diameter: 5” • Rated input: 1,400 Watts • Power: 12 Amps• Tool weight: 5.5lbs.• Spindle: 5/8”-11
Variable Speed
The WE 14-125 VS offers a long lasting motor, vario constamatic (full wave electronics), quick wheel change system, and auto-stop carbon brushes.
1909-0151 $179.00 3905-0014 $269.00
1909-0052 $240.0399-030-0177 $8.25
Carbon BrushSET
1909-0161 $263.3899-030-0227 $10.00
Motor: 120V, 7 AmpsSpeed: 500-2,800 RPMWeight: 7.3 lbs.Spindle: 5/8”-11
GRINDERS & PoLISHERS
4
Specifications:• Air Consumption: 16 CFM• Air Pressure: 85-95 PSI• Speed: 2,500 RPM• Weight: 2.64 lbs.• Spindle: 5/8” - 11• Air Inlet: 1/4” NPT
Equipment Included:• Air lead hose - 10 feet • Exhaust Muffler • Side handle (reversible) • Hose adapter • Water valve with hose • Wrenches / Splash Guard
High performance polisher built for continuous operation. Durable rubber coated body and insulated parts keep hands from getting cold. Has center waterfeed for dust free polishing.
Alpha - AIR 658 Pneumatic Water Feed Angle Polisher
90 Day Limited Warranty
This lightweight, versatile, pneumatic water polisher is used to polish: marble, granite and concrete. Small enough to polish tight curved corners and sink cut-outs. Features: High performance bearings, Dispersed center waterfeed to cover the whole polishing area and air control valve for variable speed up to 4,500 RPM.
Includes: Side handle, Water hose, Oil, Wrench, and Backer pad.
BEST TOOL IN IT’S CLASS, AT THE BEST PRICE !
• Air Usage: 16cfm @ 90 psi• Speed: 4,500 RPMs• 4” Grinding Wheel Size• Spindle: 5/8”-11• Net Weight: 3.3 lbs
Brass Air Coupler1/4” Female Water Conn.
Specifications:• Air Pressure: 90 PSI • RPM: 250 to 5,500 • Shaft Thread: 5/8” - 11 • Air Inlet: 1/4” NPT • Output: 320W • Length: 10-1/4 in. • Air Consumption: 16 CFM• Max. Disc Size: 5” • Weight: 4 lbs.
Equipment Included:• 25’ water hose• 5’ Air hose• 3’ Air/water hose protector• D-handle• Oil• Wrenches
S-9H Pneumatic Water Polisher
BARRANCA - BD-2321 Rear Exhaust Wet Air Polishing tool
90 Day LimitedWarranty
3 Month Limited Warranty
PLW 923S 4” Air Stone Sander/Polisher
The compact, lightweight design gets into tight spaces with ease, and allows for all-day use with less operator fatigue. The PLW 923 S Air Stone Sander/Polisher features a central water feed with rear exhaust. and accepts 3”, 4” or 5” discs. It comes with a 4” Velcro® pad, bail handle, side handle, wrenches, hoses for air, water and exhaust along with appropriate fittings.
Specifications:• Spindle Size: 5/8”-11• Max. Speed: 3,600 RPM• Weight: 2.8 lbs.• Length: 9-1/2”• Air Consumption: 15.19 CFM• Air Inlet: 1/4”• Hose Size: 1/4”• Air Pressure: 90 PSI
3905-0030 $249.99
90 Day LimitedWarranty
3905-0018 $366.63
1909-0150 $289.00
1909-0071 $139.00
2707-0133 $3.852707-0134 $1.60
5
GRINDERS & PoLISHERS
DS-301 Planetary Polisher
voltage: 115V, 60HzCurrent: 10.5 AmpsDriver Speed: 900 to 2,700 RPMPlatform Speed: 150 to 450 RPMPlaten Speed: 750 to 2,250 RPMPlaten Size: 5 inchtool Weight: 30 lbs.3 5/8”-11 spindles
Will produce a FLAT, SWIRL FREE FINISH on monumental work, countertops, floors, walls and steps using coated abrasives, diamond polishing discs or diamond cup wheels. This machine will drastically cut down your polishing time while increasing the quality of your tops. Our package deal on the DS-301 is second to none, we guarantee it!
SAND ♦ GRIND ♦ HONE ♦ POLISH
Dust Cowl
1 Year LimitedWarranty
• Planetary, gear-driven tool.• Center coolant feed• Precision dual bearings• Built-in vacuum port• Operates wet or dry (with use of optional cowl).• Unit is powered by a heavy duty Makita motor.• Rugged, hand-operated, 12-inch platform that grinds, hones, and polishes concrete surfaces.• This RPM provides the best speed for diamond polishing, producing a perfect finish 8 times faster than a single head polisher.
voltage: 115V, 60HzCurrent: 15 AmpsDriver Speed: 6,000 RPMPlatform Speed: 3,000 RPM
DS-301 Heavy Duty Planetary Polisher
Slurry Skirt99-450-0018 $49.00
Platen Speed: 600 RPMPlaten Size: 5 inchtool Weight: 40 lbs.3 5/8”-11 spindles
Flex Planetary PolisherLCP 1703 VR
• The Perfect Machine For The Perfect Finish On Concrete, Granite & Marble.• Rugged, reliable hand-operated 12” platform made of Duralimin, a hardened, anodized aluminum.• Center water feed for wet applications can be shut off for efficient dry operation.• Uses 3” and 5” diamond polishing pads.
Tool Weight: 29lbsMotor: 110V/60Hz, 10Amps, GCFI Protected
Driver Speed: 1,100-3,400 RPMPlaten Speed: 600-1,930 RPMPlatform Speed: 157-481 RPM
Polis
hing
Pac
kage
sPa
ge 1
7-20
99-450-0001 $195.00
3905-0008 $1,889.00
3905-0027 $2,149.00
3905-0031 $2,150.99
GFCI Cord
1918-0102 $39.95
Have in-line mechanical G.F.C.I. centrally placed along the cord, test and reset buttons.
GRINDERS & PoLISHERS
6
5/8”-11 Flange Adapters
These adapters are used to hold blades with 7/8” openings to prevent them from riding on the threads of the grinder.
Flexible Water Hose Assembly with Fittings
10’-1/4” hose with quick-change connector (to fit Flex and Makita waterfeed grinders) on one end and standard female hose connector on other end.
Brass water-valve with 13” of flexible plastic hose and 1” wide spray nozzle. Fits onto almost any angle grinder handle attachment and can be fitted to blade guards on saws.
Quick Change Waterfeed Attachment
vacuumWater Lift: 72”CFM: 116Volts: 110Watts: 1324 peakAmps: 11.5RPM: 23,000
This vacuum comes complete with: 2 Wands, 1 Crevice Tool, 1 Square Floor Tool, 1 Micro Pre-filter Bag, 12’ X 1-1/2” Crush Resistant Hose. Much more than the normal run of the mill Wet/Dry Vac.
1 Year LimitedWarranty
• Cyclonic Pre-Filtering• No Blow-By• Clean filters without taking lid off• No filter change for wet pick up• Regulated drain
Dust Collection Shroud
• Fast and easy to install• Clear polycarbonate for improved visibility and durability• Removable front edge of shroud for grinding close to wall or edge• Brush skirt for improved performance on textured surface• Captures 99% of airborne particulate
Nut Clamp 99-765-0027 $3.05Nut Flange 99-765-0026 $2.58
1918-0094 $19.95 1918-0022 $49.00
4714-0002 $299.95
Micron Pre-Filter Bag 99-461-0001 $25.006ft Hose Extension 99-461-0002 $21.95
5” DustBuddie™ 1918-0104 $99.957” DustBuddie™ 1918-0103 $99.95
Type 4” PriceFine 1903-0304 $79.95
Medium 1903-0302 $79.95Coarse 1903-0303 $79.95
Cyclone Flat Resin Cup Wheels
The first ever flat resin cup wheel with 12 diamond filled segments.
Perfectly balanced for smooth precision grinding.
5/8”-11 thread
Flat DiamondShaping Wheels
Specially designed for chip-free grinding of stone edges.
5/8”-11 thread
Type 6” PriceFine 1903-0159 $141.75
Medium 1903-0024 $141.75Coarse 1903-0025 $141.75
5/8”-11 thread
Grinding Wheels
Balanced to eliminate vibration & chipping when shaping. 5/8”-11 (M18x2) Female thread. Aggressive design with thick turbo segments & diamonds
7
GRINDING & SHAPING
Brazed Hard Diamond Discs These diamond pads are the best for fast stock removal. They are rigid and the edges are tapered for flat polishing and lippage removal. The 5” sizes are ideal for countertop polishing with the DS-301 Machine and have velcro backing for quick changing of grit. (pg. 5).
Q.R.S Connection
4” #60 1806-0247 $45.504” #120 1806-0246 $42.454” #220 1806-0471 $42.455” #30 1806-0028 $55.005” #60 1806-0371 $55.005” #120 1806-0248 $51.855” #220 1806-0370 $51.85
New aggressive design. Super lightweight and fast grinding.
turbo t-Cup Diamond Wheelswith 5/8”-11 female thread
Size Item # Price4” 1903-0093 $39.005” 1903-0094 $46.006” 1903-0095 $58.007” 1903-0096 $66.00
Double Row DiamondGrinding Wheels
A low cost alternative to the turbo style wheels and the preferred grinding wheel used for concrete construction work. Coarse grit only.
Size Item # Price4” 1903-0102 $44.005” 1903-0220 $47.006” 1903-0221 $52.007” 1903-0103 $72.00
Size Type Item # Price4” Fine 1903-0308 $60.004” Medium 1903-0307 $60.004” Coarse 1903-0306 $60.005” Coarse 1903-0309 $82.006” Coarse 1903-0310 $103.007” Coarse 1903-0311 $115.00
DIAMoND PoLISHING PADS
8
DX Series DX-PRO Polishing Pads• 3mm Thick• Strongest Q.R.S Connection Available
• Extra Flexible• High Quality
use under 4,000 RPM - Wet only
DX Series
• 4mm Thick• Q.R.S Backing• Long Lasting• Very aggressive for fast stock removal• Rigid pad that is great for surface polishing
ultra Speed Pads
USE WET ONLY Use under 4,000 RPM
Sets include grits 40-3000, excluding #60
Grit 4” Price 5” Price40 4106-1440 $28.00 4106-1449 $42.0060 4106-1429 $28.00 - -100 4106-1441 $28.00 4106-1450 $42.00200 4106-1442 $28.00 4106-1451 $42.00400 4106-1443 $28.00 4106-1452 $42.00800 4106-1444 $28.00 4106-1453 $42.00
1500 4106-1445 $28.00 4106-1454 $42.003000 4106-1446 $28.00 4106-1455 $42.00
40-3000 6001-0340 $196.00 6001-0341 $294.00
Polishing PadsriVAl Economy
Our goal was simple! The Best Pad at
this price Period!
• 3mm thick• Use Wet Only
Grit 4” Price 5” Price50 4106-1601 $9.95 4106-1706 $17.95
100 4106-1602 $9.95 4106-1707 $17.95200 4106-1603 $9.95 4106-1708 $17.95400 4106-1604 $9.95 4106-1709 $17.95800 4106-1605 $9.95 4106-1710 $17.951500 4106-1606 $9.95 4106-1711 $17.953000 4106-1607 $9.95 4106-1712 $17.95
50-3000 6001-0402 $69.65 6001-0415 $125.65
Grit 4” Price 5” Price50 4116-0021 $19.00 4116-0037 $28.00100 4116-0022 $19.00 4116-0038 $28.00200 4116-0023 $19.00 4116-0039 $28.00400 4116-0024 $19.00 4116-0040 $28.00800 4116-0025 $19.00 4116-0041 $28.00
1500 4116-0026 $19.00 4116-0042 $28.003000 4116-0027 $19.00 4116-0043 $28.00
60-3000 6001-0093 $133.00 6001-0236 $196.00
9
DIAMoND PoLISHING PADS
3M Polishing Pads
• Q.R.S Backing• Extra Long Life
use under 4,000 RPM - Wet only
• Very Flexible• Highest Quality Pad Available
Grit Type 4” Price 5” Price60 Metal Bond 4106-1050 $49.25 4106-0825 $76.35120 Metal Bond 4106-1051 $41.96 4106-0826 $64.96220 Metal Bond 4106-1052 $35.32 4106-0827 $54.62400 Metal Bond 4106-1053 $27.09 4106-0828 $41.74600 Metal Bond 4106-1054 $27.09 4106-0877 $41.74800 Resin 4106-1055 $26.31 4106-0824 $40.50
1800 Resin 4106-1056 $26.31 4106-0823 $40.503000 Resin 4106-1057 $26.31 4106-0822 $40.50
60-3000 6001-0332 $259.64 6001-0180 $399.00
Grit 4” Price 5” Price35 4106-1577 $21.95 4106-1713 $34.7550 4106-1533 $21.95 4106-1714 $34.75100 4106-1534 $21.95 4106-1715 $34.75200 4106-1535 $21.95 4106-1716 $34.75400 4106-1536 $21.95 4106-1717 $34.75800 4106-1537 $21.95 4106-1718 $34.75
1500 4106-1538 $21.95 4106-1719 $34.753000 4106-1539 $21.95 4106-1720 $34.75
50-3000 6001-0370 $153.65 6001-0416 $243.25
Grit 4” Price 5” Price30 4106-1587 $94.25 4106-0757 $109.1550 4106-1588 $88.75 4106-0758 $94.75
100 4106-1748 $78.25 4106-0759 $89.75
Copper Resin Pads
• Q.R.S Connection• use wet only• use under 4,000 RPM
Specially designed copper bond for long lasting and high performance. Designed for granite, marble, natural & engineered stone, and can even be used on concrete.
DS CopperFlexible Polishing Pads
• Q.R.S Connection• use wet only• use under 4,000 RPM
Designed with a copper bond for long lasting. Copper dissipates heat while the resin is given longer life. Designed for granite, marble, natural and engineered stone.
DIAMoND PoLISHING PADS
10
Mudslinger DiamondPolishing Pads
DX Series Con-Dri Pads For Concrete and Granite
Use under 4000 RPMQ.R.S. Connection
favorite for DS-301 ownerS
• Best dry pad available• Superior Polish
use under 4000 RPM - Wet only
Grit 4” Price 5” Price 7” Price50 4106-1391 $36.90 4106-1009 $39.90 4106-1037 $59.95
100 4106-1392 $36.90 4106-1010 $39.90 4106-1038 $59.95200 4106-1393 $36.90 4106-1011 $39.90 4106-1039 $59.95400 4106-1394 $36.90 4106-1012 $39.90 4106-1040 $59.95800 4106-1395 $36.90 4106-1013 $39.90 4106-1041 $59.951500 4106-1396 $36.90 4106-1014 $39.90 4106-1042 $59.953000 4106-1397 $36.90 4106-1015 $39.90 4106-1043 $59.95
50-3000 6001-0315 $258.30 6001-0264 $279.30 6001-0310 $419.65
The Mudslinger Pads are 8mm thick, can be run wet or dry, and are designed specifically for the DS-301 Planetary Polisher. Tests show 4 to 5 times longer life than other leading polishing pads on the market today. Join the long list of DS-301 owners that have switched to the incomparable Mudslinger Polishing Pads for superior polish and life.
• Largest pad available for single head units • Much easier to stay flat• Q.R.S backing• Very high quality • High power polisher needed
Grit 4” Price 5” Price 7” Price50 4106-1488 $19.00 4106-1496 $28.00 4106-1632 $44.95100 4106-1489 $19.00 4106-1497 $28.00 4106-1633 $44.95200 4106-1490 $19.00 4106-1498 $28.00 4106-1634 $44.95400 4106-1491 $19.00 4106-1499 $28.00 4106-1635 $44.95800 4106-1492 $19.00 4106-1500 $28.00 4106-1636 $44.95
1500 4106-1493 $19.00 4106-1501 $28.00 4106-1637 $44.953000 4106-1494 $19.00 4106-1502 $28.00 4106-1638 $44.95
50-3000 6001-0358 $133.00 6001-0359 $196.00 6001-0411 $314.65
Grit 3” Price50 4106-1592 $24.95
100 4106-1593 $24.95200 4106-1594 $24.95400 4106-1595 $24.95800 4106-1596 $24.951500 4106-1597 $24.953000 4106-1598 $24.95
Cyclone Convex Polishing PadsThese pads are useful for ogee edge polishing. Good for polishing difficult to reach areas like inside corners of sink cut outs. Size: 76mm
• Q.R.S Connection• use wet only• use under 4,000 RPM
• Extra Flexible • 3mm Thick
11
DIAMoND PoLISHING PADS
Diamond Hand Pads
Diamond strips are flexible to allow for shaping and smoothing small, intricate areas.
Diamond Strips
Professional quality diamond hand pads with thick foam backing. From grind to polish.
Color Grit Item # PriceGreen 60 4103-0113 $22.85Black 120 4103-0114 $20.00Red 200 4103-0115 $15.00
Yellow 400 4103-0116 $14.30White 800 4103-0117 $14.30Blue 1800 4103-0118 $10.00
60-1800 6001-0087 $96.45
7” Spinflex Pads
Diamond Spinflex pads are a revolutionary polishing and maintaining system that use special grit diamond pads dry, Plus and can be used on polished concrete, terrazzo, marble, natural stone, vinyl and epoxy. These pads will give a dull surface a glossy, high shine in just several passes, saving you time & money!
• Using coarse to finer grits – you can polish a concrete, terrazzo, or restore a natural stone floor to an attractive shine.• Less expensive than mechanical grinding and polishing this makes you more competitive!• This system is designed to be used with most high or low speed auto scrubbers, burnishers, or floor machines on the market.• Simple maintenance equivalent to that of polished concrete.
Grits 2-1/4” x 4” Price#70 4103-0020 $18.00
#120 4103-0017 $15.50#220 4103-0013 $12.80#400 4103-0010 $10.90
#600R 4103-0005 $9.60#800 4103-0006 $9.60#1800 4103-0007 $9.60#3500 4103-0008 $9.60
Handblock 4103-0011 $10.80Set (8 Grits, Handblock) 4103-0032 $100.00
Grits Item # Price#400 4106-1736 $19.32#800 4106-1737 $19.32#1500 4106-1738 $19.32#3000 4106-1739 $19.32
DIAMoND PoLISHING PADS
12
Diskit Backer Pads5/8”-11 female thread
Vinyl backer pad to work with PSA backed sanding discs. 5/8”-11 female threads. 10,000 RPM max.
Q.R.S. Connection
Q.R.S. Connection
Aluminum Hook andLoop Backer Heads
with 5/8”-11 female threads
Hook and Loop Backer Heads with 5/8”-11 female threads
Q.R.S. Connection
Size/Type Item # Price2” Rubber 4113-0083 $8.953” Rubber 4113-0088 $10.004” Rubber 4113-0085 $11.005” Rubber 4113-0086 $11.25
4” Rubber 4113-0135 $10.95
Higher Quality
Q.R.S. connection
Hook and Loop Backer Heads
SUPER FlexibleSize Item # Price3.25” 4113-0134 $22.50
ogee Aluminum Rubber Backer Heads
5/8”-11 female thread
Makes it able to polish concave profiles! Rubber helps protect edges.
7009-0007 $149.95
Da’ ShaftPolisher Extension
This shaft allows you to get into
places you had to polish
by hand before.
5/8”-11 female thread
Size Type Item # Price3” Rigid 4113-0074 $13.004” Rigid 4113-0058 $15.005” Rigid 4113-0075 $24.507” Rigid 4113-0114 $70.00
5” PSA 1908-0064 $19.995” QRS 1908-0081 $16.165” QRS 1908-0088 $18.504” QRS 1908-0086 $18.50
With center holeWithout center hole
Size/Type Item # Price3” Rigid 4113-0013 $17.244” Rigid 4113-0014 $17.695” Rigid 4113-0026 $22.10
2” Rubber 4113-0022 $16.80 3” Rubber 4113-0023 $17.12 4” Rubber 4113-0024 $18.23 5” Rubber 4113-0030 $25.97
Size thick Item # Price3” 3/4” 4113-0041 $17.854” 3/4” 4113-0040 $19.755” 3/4” 4113-0046 $21.25
Extremely flexible backer heads with 5/8”-11female thread.
Super thickBacker Heads
Q.R.S. connection
13
FLooR PoLISHING
These machines effortlessly float over wet or dry concrete on planetary floating heads & are driven by a single serpentine belt. Machines have a self-leveling skirt which
prevents dust or slurry from spraying out.
Lavina 7 Lavina 7N Lavina 16® Lavina 20® Lavina 20®N Lavina 25® Lavina 25®N Lavina 32®
Voltage 1ph x 110V 1ph x 208-240V 1ph x 208-240V 1ph x 208-240V 1or 3ph x 208-240V 1or 3ph x 208-240V 3ph x 208-240V 3ph x 208-240VAmperage 15 Amps 15 Amps 12 Amps 15 Amps 30 Amps 30 Amps 45 Amps 60 AmpsApplication dry dry wet or dry wet or dry wet or dry wet or dry wet or dry wet or dryHorse Power 2 HP 3 HP 3 HP 4 HP 7.5 HP 10 HP 15 HP 20 HPAttachment speed 1,000 RPM 500-1,100 RPM 300-1,100 RPM 300-1,100 RPM 300-1,100 RPM 300-1,100 RPM 300-1,100 RPM 300-1,100 RPMWorking width 7 in. 7 in. 16 in. 20 in. 20 in. 25 in. 25 in. 32 in.Tool diameter 7 in. 7 in. 3 x 7 in. 3 x 9 in. 3 x 9 in. 3 x 9 in. 3 x 9 in. 6 x 9 in.Tool holder diam. 6.5 in. 6.5 in. 3 x 6.5 in. 3 x 6.5 in. 3 x 6.5 in. 3 x 6.5 in. 3 x 6.5 in. 6 x 6.5 in.Weight of Machine 137 lbs. 137 lbs. 203 lbs. 285 lbs. 337 lbs. 439 lbs. 550 lbs. 880 lbs.Grinding pressure 50 lbs. 50 lbs. 121 lbs. 180 lbs. 216 lbs. 306 lbs. 331 lbs. 639 lbs.Machine L.W.H. 39”x13”x37” 39”x16”x37” 46”x17”x42” 53”x21”x43” 53”x21”x43” 62”x28”x46” 62”x27”x46” 90”x 34”x44”
Item# 1802-0019 1802-0020 1802-0021 1802-0022 1802-0023 1802-0024 1802-0025 1802-0026Price $3,685.00 $4,014.00 $5,834.00 $6,800.00 $8,467.00 $13,984.00 $16,650.00 $25,734.00
LAvINA™ 1250 Single-phase110v 50/60Hz vacuum
LAvINA™ 2150 Single-phase220v 50/60Hz vacuum
Filtration SystemPulse-Bac® Celf-Cleaning TechnologyFilter Media5 x Twist-On Filters, 100% Spunbond Polyester, PTFE CoatedMotorAMETEK® GEN II INFIN-A-TEKTM, TANGETIAL; 1750 WattsCFM: 450 (OEM Rating)Inlet: 3.00”Lift: 70” Amperage: 7.9 Ampvoltage: 220V AC, 50/60HzHeight: 63” Weight: 222 lbsCapacity: 8 Gallons
Filtration SystemPulse-Bac® Celf-Cleaning TechnologyFilter Media3 x Twist-On Filters, 100% Spunbond Polyester, PTFE CoatedMotor2 x AMETEK LAMB MOTORS, 1100 Watts (P/N 103575-03)CFM: 245 (OEM Rating)Lift: 70” Amperage: 15.5 Ampvoltage : 110V AC, 50/60HzHeight: 38” Weight: 82 lbsTop Hood/Base Plate Size12.93” H x 21.57” Wtop Cover/Hood Weight : 44 lbstank Assm. Size: 25.48” H x 22.86” Wtank Assm. Weight: 43 lbs (w/Filters)Capacity: 16 Gallons
floor polishing Machines
1809-0005 $4,292.00 1809-0006 $7,477.00
FLooR PoLISHING
14
Foam Head 9”Q.R.S. Connection
50lb Weight
NAto™ 3” Super Thick Polishing Discs
Each grit step increases concrete’s glossiness and reflectivity. For matte finish stop polishing after grit 400.
v-Harr™ System for Polishing &Restoring Concrete Floors
This system is developed exclusively for polishing and restoring concrete floors. However, it is also ideal for terrazzo and soft marble floors and can be used on any planetary movement floor polisher.
Many Other Sizes Available
1804-0064 $99.001804-0069 $176.00
#30 1806-0706 $18.70#50 1806-0707 $18.70
#100 1806-0324 $18.70#200 1806-0704 $18.70#400 1806-0708 $18.70#600 1806-0709 $18.70#800 1806-0710 $18.70
#1500 1806-0705 $18.70#3500 1806-0711 $18.70SET 6001-0304 $168.30
Grit Item # Price#30 1806-0330 $70.75#46 1806-0331 $63.50#70 1806-0332 $61.50
#120 1806-0281 $61.50
3” Super Thick Floor DiscsMETAL BOND
These superthick floor polishing discs are used for lighter machines which develop a relative pressure of 2 to 6 lbs. per square inch.
Can be used wet or dry
Grit 9” Price#120 1806-0712 $54.95#220 1806-0713 $54.95#400 1806-0714 $54.95#600 1806-0715 $54.95#800 1806-0716 $54.95
#1800 1806-0717 $54.95#3500 1806-0718 $54.95#8500 1806-0725 $54.95Set:
120-1800 6001-0357 $329.70
They are for wet applications only!
Terrazzo bond for softer concrete. The 6 buttons provide a less aggressive cut & allow for a more refined finish.
9” PLAtE FoR LAvINA w/ 6 ButtoNS
9” PLAtE FoR LAvINA w/ 6 ButtoNS
Metal bond for harder concrete. The 6 buttons provide a less aggressive cut & allow for a more refined finish.
9” PLAtE FoR LAvINA w/ 4 ButtoNS
9” PLAtE FoR LAvINA w/ 4 ButtoNS
Metal bond system which is recommended for a more aggressive grind or cut of harder concrete floors.
Terrazzo bond system, which is recommended for a more aggressive grind or cut of softer concrete floors.
Grit Item # Price#6 1804-0082 $139.00
#14 1804-0083 $139.00#30 1804-0084 $119.00#70 1804-0085 $119.00
#120 1804-0086 $119.00
Grit Item # Price#6 1804-0080 $126.00
#14 1804-0081 $126.00#30 1804-0070 $109.00#70 1804-0071 $109.00
#120 1804-0072 $109.00
Grit Item # Price#6 1804-0001 $109.00
#14 1804-0002 $109.00#30 1804-0003 $94.00#70 1804-0004 $94.00
#120 1804-0005 $94.00
Grit Item # Price#6 1804-0087 $126.00
#14 1804-0088 $126.00#30 1804-0089 $109.00#70 1804-0090 $109.00
#120 1804-0091 $109.00
15
FLooR PoLISHING
LAvINA™ SPS Floor Glow
LAvINA™ SPS Premium Densifier
PRODUCT ADVANTAGES• Low odor. Easy to apply. Fast drying.• VOC Compliant. Non-flammable. Non-toxic.• Breathable and UV stable. Will not yellow, discolor, peel or flake.• Produces a long lasting, high gloss finished concrete floor with maximum light reflectance.• Will not contribute to surface crazing. High lithium content combats surface ASR.• Gloss and hardness do not reduce slip resistance.
LAVINA SPS Floor Glow produces a long lasting high-gloss finished concrete floor with maximum light reflectance. It eliminates the need for floor waxes, liquid polishes & conventional resin based coatings. It improves the surface sheen & hardness, and the stain resistance of floors treated with LAVINA SPS Premium Densifier.
LAVINA SPS Premium Densifier’s patented formulation penetrates & reacts quickly to produce a better initial & ultimate hardness. It also provides a better abrasion resistance than conventional hardeners, & produces a fast surface gloss which improves with traffic & maintenance.
PRODUCT ADVANTAGES• Easy, one step application. No scrubbing. No flushing. No caustic waste water.• VOC Compliant. Non-flammable. Non-toxic. Low odor.• May be applied to broom finished, steel trowelled, power trowelled or burnished concrete finishes.• Improves performance, appearance and light reflectance of new or old concrete.• Reduces application time and costs of diamond polishing operations.• Will not contribute to surface crazing. • High lithium content combats surface ASR.• Lithium will not absorb water or contribute to floor sweating.• Gloss & hardness do not reduce slip resistance.• Breathable and UV stable. Will not yellow, discolor, peel or flake.• Cures quickly. Most floors can be opened to traffic within 1-hr of treatment.• Treated surfaces are easy to maintain and require no waxing.
LAvINA™ Grinding Box
Similarly to the LAVINA custom made polishing box, we offer a custom built grinding box, which accommodates three sets of grinding plates. Our LAVINA grinding box is a must have tool as it keeps all the plates organized in a single box.
*Plates not included
Qt. 5105-0007 $39.95
Qt. 5105-0008 $49.95
5105-0008 $49.95
Madein U.S.A.Madein U.S.A.
DIAMoND CoRE BItS
16
• 1-1/4”-7 thread• 15” Bit Height• Wet use only
Ideal for coring reinforced concrete and other hard materials
Diamond Concrete Core Bits
Diamond Plate Sided Core Bits
Blue Diamond - Water Jackets for Center Water Feed tools
4½” 1103-0061 $152.005” 1103-0062 $168.006” 1103-0063 $210.008” 1103-0064 $255.00
10” 1103-0065 $325.0012” 1103-0066 $367.50
These Diamond sided core bits are the new generation of diamond core bits. The electroplated diamond sides prevent the core from slowing down when the segments wear. These bits cut fast and have a long life. Use with drill presses or waterfeed angle grinders.
Try these new core bits and see the advantages for yourself!Must be used wet.
5/8”-11 connections
Size Item # Price3/8” 1105-0067 $30.001/2” 1105-0068 $31.003/4” 1105-0072 $33.001” 1105-0069 $35.00
1-1/4” 1105-0026 $45.001-3/8” 1105-0065 $46.001-1/2” 1105-0070 $65.00
2” 1105-0071 $69.002-1/2” 1105-0071 $69.00
Cyclone Dry/WetCore Bits
Specially designed T-segments for segment durability. • Recently tested by an independent laboratory to drill 145 holes dry and 250 holes wet at an average of 30 seconds per hole.• Laser-welded segments for increased segment strength.• Perfect for use in the field when water is not an option and outperforms any wet bit used in the shop with water.Recommended 4,000-8,000 rpm.
1-3/4” 1105-0123 $93.002” 1105-0124 $98.50
2-1/4” 1105-0126 $104.252-1/2” 1105-0125 $109.002-3/4” 1105-0127 $117.00
Size Item # Price1” 1105-0122 $62.00
1-1/4” 1107-0457 $66.671-3/8” 1107-0458 $75.001-1/2” 1107-0459 $83.33
Description Item # Price1/2” shaft to 5/8-11 with 1/4” hose connection 1918-0083 $118.751/2” shaft to 5/8-11 with 1/2” hose connection 1918-0084 $123.50
1/2” shaft to 5/8-11 with garden hose connection 1918-0085 $128.25
5/8-11 fem. to 5/8-11 male with 1/4” hose connection 1918-0086 $138.505/8-11 fem. to 5/8-11 male with 1/2” hose connection 1918-0087 $140.00
5/8-11 fem. to 5/8-11 male with garden hose connection 1918-0088 $146.50
1/2” shaft to 1/2 gas with 1/4” hose connection 1918-0089 $138.001/2” shaft to 1/2 gas with 1/2” hose connection 1918-0090 $143.00
1/2” shaft to 1/2 gas with garden hose connection 1918-0091 $148.00
1/4” NPT brass valve (fits any of the above water jackets) 1918-0092 $24.00 Must Use Wet
Diam. Item # Price2” 1103-0056 $74.00
2½” 1103-0057 $88.003” 1103-0058 $102.00
3½” 1103-0059 $116.004” 1103-0060 $136.00
17
PACKAGE DEALS
4” Ultra-Speed Wet Polishing Package
4” CopperHead Wet Polishing Package
5” CopperHead Wet Polishing Package
1909-0079 Makita PW5001C 4” V.S. Electric Wet Polisher
1918-0094 10’ x 1/4” Water Hose Assembly
4113-0014 Alpha 4” Rigid Backer Pad
6001-0093 4” Ultra-Speed Polishing 7-Disc Set
5209-0020 Concrete Specialties Gear Bag
6001-0421 PACKAGE $440.00
1909-0079 Makita PW5001C 4” V.S. Electric Wet Polisher
1918-0094 10’ x 1/4” Water Hose Assembly
4113-0014 Alpha 4” Rigid Backer Pad
4113-0024 Alpha 4” Flexible Rubber Backer Pad
6001-0370 4” CopperHead Polishing 7-Disc Set
5209-0020 Concrete Specialties Gear Bag
6001-0270 PACKAGE $495.00
1909-0079 Makita PW5001C 4” V.S. Electric Wet Polisher
1918-0094 10’ x 1/4” Water Hose Assembly
4113-0026 Alpha 5” Rigid Backer Pad
4113-0030 Alpha 5” Flexible Rubber Backer Pad
6001-0416 5” CopperHead Polishing 7-Disc Set
5209-0020 Concrete Specialties Gear Bag
6001-0271 PACKAGE $565.00
PACKAGE DEALS
18
5” Con-Dri Dry Polishing Package
1909-0028 Flex LW603VR 5”Wet Stone Grinder
1918-0094 10’ x 1/4” Water Hose Assembly
4113-0114 7” Rigid Aluminum Backer Pad
6001-0310 7” Mudslinger Pads Set
99-030-0197 Spacer Bushing
6001-0308 PACKAGE $793.00
7” Mudslinger Wet Polishing Package
3905-0014 Metabo PE12-175 7”Variable Speed Polisher
1918-0103 7” DUST BUDDY
4113-0114 7” Rigid Aluminum Backer Pad
6001-0411 7” Con-Dri Polishing 7-Disc Set
6001-0418 PACKAGE $695.00
7”Con-Dri Dry Polishing Package
1909-0108 Makita 9565CV 5” Variable Speed Angle Grinder
1918-0104 5” DUST BUDDY
4113-0075 5” Rigid Aluminum Backer Pad
6001-0359 5” Con-Dri Polishing 7-Disc Set
5209-0020 Concrete Specialties Gear Bag
6001-0273 PACKAGE $521.76
5” Mudslinger Wet Grinding Package1909-0079 Makita PW5001C 4” V.S.
Electric Wet Polisher1918-0094 10’ x 1/4” Water Hose Assembly
4113-0075 5” Rigid Aluminum Backer Pad
6001-0264 5” Mudslinger Pads Set
5209-0020 Concrete Specialties Gear Bag
6001-0354 PACKAGE $550.00
4” CopperHead Da’ Shaft Wet Package
3905-0030 Flex PLW 923S 4” Air Stone Sander/Polisher
4113-0041 3” Extra Thick Backer Pads
6001-0370 4” CopperHead Polishing 7-Disc Set
7009-0007 Da’ Shaft Polisher Extension
6001-0420 PACKAGE $535.00
19
PACKAGE DEALS
5” RIVAL Do It YourselfGrinding Package
1909-0052 Alpha AWP-158 Polisher
4113-0075 5” Rigid Aluminum Backer Pad
6001-0415 5” RIVAL Polishing 7-Disc Set
5209-0020 Concrete Specialties Gear Bag
6001-0276 PACKAGE $360.00
PACKAGE DEALS
20
DS-301 & 3-Sets 5” Mudslinger Pads DS-301 & 6-Sets 5” Mudslinger Pads
DS-301 Polisher & Mudslinger Pad Packages
3905-0008 DS-301 Planetary Polisher
6001-0264 3 Sets Mudslinger Pads
6001-0277 PACKAGE $2,595.00
3905-0008 DS-301 Planetary Polisher
6001-0264 6 Sets Mudslinger Pads
6001-0278 PACKAGE $2,995.00
Flex Planetary & 3-Sets 5” Mudslinger Pads Flex Planetary & 6-Sets 5” Mudslinger Pads
Flex Planetary Polisher & Mudslinger Pad Packages
3905-0031 Flex Planetary Polisher
6001-0264 3 Sets Mudslinger Pads
6001-0417 PACKAGE $2,695.00
3905-0031 Flex Planetary Polisher
6001-0264 6 Sets Mudslinger Pads
6001-0419 PACKAGE $3,095.00
21
DRuM WHEELS
With top bearing and 5/8”-11 thread. Now have New 30 grit!
with center water
Brazed Diamond Drum Clean-up Wheels
Diamond Polishing Drum Wheels
Edge polishing for sink cut-outs.Recommended use: oscillate up & down for proper drum wear.
5/8”-11 female thread - with center water
The fastest way to remove material after cutting out sink holes with a diamond blade, or to shape a radius on the outside edge.
with center water
Zero tolerance Wheels with 5/8”-11 threads and internal water holes
Use wet or dry!
Grit 2” x 2” Price#50 1919-0163 $21.95
#100 1919-0164 $21.95#200 1919-0165 $21.95#400 1919-0166 $21.95#800 1919-0167 $21.95
#1500 1919-0168 $21.95#3000 1919-0169 $21.95Black 1919-0170 $27.95White 1919-0171 $27.95
50-3000 6001-0409 $153.65
oscillating Drum Wheel System
Type Grit Item # Price2 x 2” Metal #30 1919-0172 $115.002 x 2” Metal #100 1919-0081 $115.00
Resin #50 1920-0038 $89.00 Resin #100 1920-0039 $89.00 Resin #200 1920-0031 $89.00 Resin #400 1920-0032 $89.00 Resin #800 1920-0033 $89.00 Resin #1500 1920-0045 $89.00 Resin #3000 1920-0035 $89.00
Final Buff Buff 1920-0036 $89.00 Set: 50-3000 6001-0092 $623.00
5/8”-11female thread
*Metals do not oscillate
Use wet or dry!
Oscillating Head
4108-0024 $199.50
X-TREME JR.Page 24
Size Grit Item # Price2 x 2” #30 1919-0172 $115.002 x 2” #100 1919-0173 $115.003 x 2” #30 1919-0174 $170.003 x 2” #100 1919-0175 $170.00
Size Item # Price2” x 1-3/8” 1919-0100 $85.003” x 1-3/8” 1919-0101 $124.004” x 1-3/8” 1919-0102 $130.00
Buffer Cap
Used to increase the shine in onyxes, marble, natural stones, granite, agglomerates and terrazzo. It also can brighten up stones that have lost their shine. Cera TeWax is the result of pure and white waxes, dissolved through solvents. It allows high penetration levels on treated material leading to a long-lasting effect.
teWax
Comparable to Pamir Wax
Liter Clear 0706-0012 $12.95Liter Black 0706-0009 $12.95
GCT
GCT
BuFFING
22
These solid felt buffers are Q.R.S. backed for quick change. This high quality felt ensures positive results. Use to apply buffing compounds. Great for cleaning and restorating. Medium density for long life. Can be used wet or dry.
Felt Buffing Wheels
Solid Felt Buffer
Buffers are made of the finest quality felting wools, carefully selected and blended to ensure uniform quality and density.
4” Felt Buffer
Black Hook and
Loop backing
Paste Wax
A high grade wax for concrete, marble, granite, and travertine. Special Preparation is a quick drying formula that penetrates the material giving the surface a long lasting sheen and deepens color. Not to be used on floors.
High density cotton3” 4101-0001 $6.594” 4101-0002 $8.195” 4101-0003 $11.24
5” Alum. Buffer Cap 4101-0015 $39.20
4” 4101-0032 $12.75
Black Wax, 1.3kg 0706-0031 $19.00 Clear Wax, 1.3kg 0706-0032 $15.50
3” have 1/2” recesses
Size 1” Thick Price 2” Thick Price Size 3” Thick Price5” 4101-0011 $22.90 4101-0013 $35.20 6” 4101-0020 $95.006” 4101-0014 $32.04 4101-0017 $56.10 8” 4101-0030 $131.507” 4101-0025 $43.49 4101-0018 $76.50 10” 4101-0031 $199.008” 4101-0026 $49.95 4101-0019 $99.959” 4101-0027 $65.00 4101-0028 $126.5010” 4101-0022 $77.50 4101-0029 $155.90
Can be used for Floor Polishing Applications Too!
These Profilers are designed to produce everything from roundovers to vertical grinding on granite, engineered stone, and porcelain tile and slab. The nylon guide slides along the surface and the rotary toucher controls the depth of the cut to make this tool nearly “goof-proof”. 3,500 max, RPM. 5/8”-11 thread.
Profiler Wheels Shape Size Item # PriceB 3/16” Roundover 4315-0003 $125.73 B 3/8” Roundover 4315-0001 $125.73 B 1/2” Roundover 4315-0013 $146.89B 3/4” Roundover 4315-0002 $157.33 E 1” Holl. Bevel 4315-0015 $207.32
F Pos.0 3/4/ Ogee 4315-0016 $281.28F Pos.1 3/4” Ogee 4315-0014 $292.86F Pos.0 1-1/4” Ogee 4304-0114 $301.61F Pos.1 1-1/4” Ogee 4304-0115 $319.58
Q 1/4” Recessed 4315-0017 $174.48RE 3/8” Int. Bevel 4315-0012 $170.62V 1-1/4” Full Bull 4310-0101 $345.42V 1-1/2” Full Bull 4310-0197 $416.55Z 1-1/4” Vert. Grind 4315-0011 $213.64Z 1-1/2” Vert. Grind 4315-0018 $272.86
Diamond Stone Profilers
• Fast stock removal • 5/8”-11 female thread for angle grinders
COARSE
These cost effective stone profilers are made to work aggressively.
Shape Item # Size PriceA 1912-0060 3/16” R $99.00A 1912-0061 3/8” R $99.00A 1912-0062 1/2” R $109.00
B20 1912-0055 3/4” Half Bullnose $129.00E 4302-0042 3/16” Bevel $99.00E 1912-0059 3/8” Bevel $99.00
F20 1912-0056 3/4” Ogee $129.00V20 1912-0057 3/4” Full Bullnose $109.00V30 1912-0058 1-1/4” Full Bullnose $149.00
23
EDGE PRoFILING
Router Bits not included
X-TREME JR.
This new design is the first of its kind. It features the Makita 9565CV with its lasting power and variable speed from 2,850 to 10,500 RPM. The Aquaplaning bottom gives effortless movement.
• Aquaplaning• 120V, 12 Amps• 5/8”-11 threaded arbor**• Full height adjustment
Affordable Alternative
Router
6001-0363 $995.00
EDGE PRoFILING
24
GALESKI - Contour Cat - KS-80
This German built industrial 2HP, variable speed router is the most versatile machine ever built for countertop work. Perfect for edging countertops up to 4cm, using APPEX diamond router bits. Also is small enough to cleanup, edge and polish inside sink holes! No other machine on the market can do all this. Has height adjustment plate, splash guard, and a central and external waterfeeds. Felt plate rides on a layer of water to help prevent surface scratching. The Motor is very powerful and will last for years: 12.5 Amp, 2 HP, dial-in variable speed: 2,400, 3,200 & 6,800 RPM.
• 5/8”-11 Threaded Arbor• Voltage: 115V - 56/60 Hz • Power Input: 1,300W, 1,500W • Horse Power: 1.8 HP, 2.0 HP, 12.5 AMP • Max. Tool Diameter: 5” (120mm)• Variable Speed: 2,400 to 6,800 RPM • Weight: 14.3 lbs.
Comes with FREE
Heavy Duty Carrying Case
Variable Speed6 Month Limited
Warranty
6 Month LimitedWarranty
FLEX - LWW2106vR 40mm Edge Shaping Machine
Heavy-Duty and cost much less than comparable routers for 40mm material. Variable speed 2,000 - 6,500 RPM, 120V - 15 AMP. Has plastic wheels and has both a center waterfeed and external waterfeed. Includes GFI. * 1/2 Gas Female Arbor
1 Year LimitedWarranty
4306-0080 $2,420.00
2106VR 4305-0002 $1,499.00*1/2 gas 4308-0097 $39.25
• Threephase electric motor 48 volts• Asynchronous B14 motor, 1.4 HP, 50/60 hz• Motor speed 2,800 RPM• Shaft speed: 4,200 RPM• Anticorodal steel• INOX steel structure• Screws in stainless steel
• Variable speed: 2,800-5,600 RPM• Asynchronous 3ø motor, 3.5 HP, 48 volts, 50/60 hz• Mechanical structure in aluminium, anticorodal and stainless steel; • Screws in stainless steel• Housing in fireproof polypropylene (super-light)• Isolation ch, term. 140° c• Transmission poly/v, 10 g• Special treatment: mechanical parts are galvanized, aesthetic part are heat painted
The Masters are portable electric contouring machines with “WATER SYSTEM” base plate which creates a gliding water film between the machines and the slab. This system immediately eliminates the stone pieces broken during the working without scratching the surfaces. These machines are built with high-quality materials chosen between the best producers of rough materials.
MAStER 3500 (variable Speed)
MAStER 2800 (Single Speed)
Base Plate 2800Base Plate 3500“Water System”
Plate 3500 Conversion unit
4305-0030 $4,384.00
4305-0033 $2,923.00
4305-0031 $858.004308-0183 $610.004308-0179 $350.004308-0181 $382.00
25
EDGE PRoFILING
Madein U.S.A.Madein U.S.A.
Blue Diamond 1/2” Shaft Router tools
Half B
ullnosew
/ bottom bearing
w/ bottom
bearing
3/16” R x 1 3/4” Ø 4309-0048 $125.00 4309-0098 $127.001/4” R x 1 3/4” Ø 4309-0049 $130.00 4309-0099 $122.003/8” R x 1 3/4” Ø 4309-0050 $142.00 4309-0100 $140.00
1/2” R x 2” Ø 4309-0051 $157.00 4309-0101 $152.005/8” R x 2” Ø 4309-0052 $173.00 4309-0102 $168.003 cm R x 3” Ø 4309-0054 $269.00 4309-0104 $237.00
45° Bevel, 1/4” x 1 3/4” Ø 4312-0028 $117.00 4312-0032 $105.002 cm x 2 1/2” Ø Ogee
w/ bottom bearing 4304-0090 $232.00 4304-0107 $217.0045° Bevel, 1/4” x 1 1/4”
w/ bottom bearing 4312-0014 $114.00 4312-0035 $110.0045° Bevel, 3/4” x 1 1/4”
w/ bottom bearing 4312-0015 $150.00 4312-0036 $142.00
EDGE PRoFILING
26
For: X-Treme, Sector, Master, Stinger, Flex, & Standard Routers
Diamond Router Bits Shape Size Profile POS 1 POS 2 Price
1 1-30 Pencil 4313-0466 - $307.00A 1/4” Radius 4313-0036 4313-0096 $167.00A 3/8” (10mm) Radius 4313-0037 4313-0097 $165.00B 3/8” (10mm) Half Bullnose 4313-0038 4313-0088 $166.00B 1/2” (15mm) Half Bullnose 4313-0039 4313-0089 $172.00B 3/4” (20mm) Half Bullnose 4313-0040 4313-0090 $174.00B 1-1/4” (30mm) Half Bullnose 4313-0041 4313-0091 $265.00
B+B 1-1/4” (30mm) Triple Waterfall 4313-0234 4313-0235 $403.00E 3/4” (20mm) Bevel Router 4313-0042 - $190.00E 1-1/4” (30mm) Bevel Router 4313-0043 - $234.00F 3/4” (20mm) Ogee 4313-0044 4313-0052 $165.00F 1-1/4” (30mm) Ogee 4313-0045 4313-0053 $233.00
FV 1-1/4” (30mm) Ogee Bullnose 4313-0348 4313-0349 $375.00FV 1-1/2” (40mm) Ogee Bullnose 4313-0201 4313-0202 $392.00
F+V 1-1/4” (30mm) Ogee+Bullnose 4313-0419 4313-0420 $510.00F+V 1-1/2” (40mm) Ogee+Bullnose 4313-0394 4313-0395 $567.00
H 3/4” (20mm) Dupont 4313-0208 4313-0209 $212.00H 1-1/4” (30mm) Dupont 4313-0212 4313-0301 $224.00O 1-1/4” (30mm) Cove Dupont 4313-0220 4313-0221 $347.00T 30/40mm Double Eased 4313-0387 - $375.00Q 3/4” (20mm) Cove Ogee 4313-0210 4313-0211 $297.00Q 1” (25mm) Cove Ogee 4313-0332 4313-0333 $345.00Q 1-1/4” (30mm) Cove Ogee 4313-0390 4313-0497 $347.00V 3/4” (20mm) Full Bullnose 4313-0046 4313-0092 $259.00V 1-1/4” (30mm) Full Bullnose 4313-0047 4313-0093 $280.00V 1-1/2” (40mm) Full Bullnose 4313-0048 4313-0094 $295.00Z 3/4” (20mm) Straight 4313-0049 - $270.00Z 1-1/4” (30mm) Straight 4313-0050 - $270.00other PoS 0 are available upon request.
High performance proved! Fast cutting & long lasting!
Shape Size Profile POS 0 PriceB 3/4” (20mm) Half Bullnose 4313-0590 $207.00B 1-1/4” (30mm) Half Bullnose 4313-0518 $307.00F 3/4” (20mm) Ogee 4313-0503 $200.00F 1-1/4” (30mm) Ogee 4313-0491 $279.00V 1-1/4” (30mm) Full Bullnose 4310-0219 $308.00
30/40 Diamonds 50/60 DiamondsDescription Item # Price Item # Price
1/2” Dia x 1 1/2” lg. Blunt end router 1916-0005 $57.00 1916-0009 $52.00
1/2” Dia x 1 1/2” lg. Sphere end router 1916-0006 $59.00 1916-0010 $54.001/2” Dia x 1 1/2” lg.
Blunt end router w/slot 1916-0007 $70.00 1916-0011 $62.003/8” R x 1 3/4”
Ø Half Bullnose 4309-0086 $128.00 4309-0093 $119.002 cm R x 2 1/4” Ø Half Bullnose 4309-0089 $167.00 4309-0096 $140.00
30/40 Diamonds 50/60 Diamonds
GFCI Included
5477NB 7-1/4” Hypoid Saw
Warning:Use a Ground fault Interrupter if using
with water to prevent electrical shock.
Blade Diameter: 7-1/4”Max. Cut - 90°: 2-3/8”Max. Cut - 45°: 1-3/4” Max. Cut - 50°: 1-9/16”
Optional WaterFeed Kit
Skil® HD5860 8-1/4” Saw
• 22-amp switch and heavy gauge cord• Die-cast aluminum motor and gear housings• Exclusive 60° bevel feature with 8-1/4” blade• High Torque 13 Amp Motor• Oil indicator level and relief bellows for long life• Precision-machined, durable worm drive gears• Cutting depth: 2-7/8”, 5/8” Arbor
Arbor: 5/8”
No Load Speed: 4,500 RPM15 Amps (120v)
4915-0005 $289.00
Without Waterfeed 4903-0023 $179.00With Waterfeed 6001-0145 $235.65
4903-0006 $56.65
27
SAWS
Makita 4101RH 5” Masonry Saw
• Powerful 7.9 AMP motor, 120V• Special cover design prevents water from entering into motor housing • Cuts up to 1-3/8” at 90° and 13/16” at 45° • Ground fault circuit interrupter (GFCI) plug • Lock-on button for continuous use • Includes 15 ft. of tubing, water pressure regulator and water valve • Adjustable depth of cut • No load speed: 12,000 RPM 5/8” Arbor
Makita 4114 14” Angle Cutter
• Arbor: 1” • Weight: 23 lbs• Power: 120V - 15 Amps• No-load speed: 3,500 RPM• Cutting disk diameter: 5”• Max. cutting depth: 5”
1 Year LimitedWarranty
1 Year LimitedWarranty
1 Year LimitedWarranty
Husqvarna - K3000 - 14” Electric Saw
The NEW Husqvarna K3000 Electric Saw is one of the world’s most powerful and versatile electric saws. With its powerful motor (2.5 HP) 120V 4,500 RPM, ergonomic design and deep cutting capacity, it’s the best in its class. The K3000 Electric is not an angle grinder, it is a cut-off saw from the ground up. 5/8” Arbor
Tool Picture Shows Optional Diamond Blade
1 Year LimitedWarranty
1 Year LimitedWarranty
1 Year LimitedWarranty
5/8” Arbor4911-0038 $339.00
4905-0052 $669.00
4905-0036 $749.00
5005BA 5-1/2”Circular Saw
Specifications:• Blade diameter: 5-1/2” • Max. cutting cap. at 90°: 1-3/4” • Max. cutting cap. at 45°: 1-3/16” • No load speed: 8,000 RPM • Watts out: 1,050 • 8 Amps, 120V
4903-0013 $259.00
with electric brake
FOR GRINDERS
Will �t the following grinders:- Metabo® WE9-125Quick- Dewalt® DW402- Ridgid® R1000- Makita® 9527PB- Bosch® 1710- Hitachi® G12SE2- Milwaukee® 6148-6
• INSTALLS IN SECONDS • GREAT FOR CRACK-
CHASING AND TUCKPOINTING
• ADJUSTABLE DEPTHOF CUT
• NON-MARKINGWHEELS
Concrete, Marble, Limestone, etc.
GRINDER CADDY™ BLADE ROLLER™FOR 4" AND 4-1/2" GRINDERS
USES: SCORING DECORATIVE LINES; TUCK POINTING;STONE AND MASONRY WORK; FABRICATION;CRACK CHASING.
PT. NUMBER
#BR45003
FOR GRINDERS
Will �t the following grinders:- Metabo® WE9-125Quick- Dewalt® DW402- Ridgid® R1000- Makita® 9527PB- Bosch® 1710- Hitachi® G12SE2- Milwaukee® 6148-6
• INSTALLS IN SECONDS • GREAT FOR CRACK-
CHASING AND TUCKPOINTING
• ADJUSTABLE DEPTHOF CUT
• NON-MARKINGWHEELS
Concrete, Marble, Limestone, etc.
GRINDER CADDY™ BLADE ROLLER™FOR 4" AND 4-1/2" GRINDERS
USES: SCORING DECORATIVE LINES; TUCK POINTING;STONE AND MASONRY WORK; FABRICATION;CRACK CHASING.
PT. NUMBER
#BR45003
FOR GRINDERS
Will �t the following grinders:- Metabo® WE9-125Quick- Dewalt® DW402- Ridgid® R1000- Makita® 9527PB- Bosch® 1710- Hitachi® G12SE2- Milwaukee® 6148-6
• INSTALLS IN SECONDS • GREAT FOR CRACK-
CHASING AND TUCKPOINTING
• ADJUSTABLE DEPTHOF CUT
• NON-MARKINGWHEELS
Concrete, Marble, Limestone, etc.
GRINDER CADDY™ BLADE ROLLER™FOR 4" AND 4-1/2" GRINDERS
USES: SCORING DECORATIVE LINES; TUCK POINTING;STONE AND MASONRY WORK; FABRICATION;CRACK CHASING.
PT. NUMBER
#BR45003
SAWS
28
Makita DPC7321 14” Power Cut-off SawDisplacement: 4.5 cu.in. (73cc.)Maximum power: 5.6 HP/4.2 kWNo load speed: 9,350 RPMMaximum spindle speed: 4,300Max. cutting depth: 4-13/16”Wheel diameter: 14”Arbor: 1” (w/adaptor)Net weight: 22.0 lbs
Includes: • 14” Cut-off wheel • Universal wrench• Torx wrench• Screwdriver• Adaptor Ring (22 mm to 1”)
PEARL Grinder Caddy™ Blade Roller™
• Installs in seconds• Great for crack-chasing & tuck pointing• Adjustable depth of cut• Non-marking wheels
PEARL Water Feed Blade Roller™ Kit
WaterFeed Kit• Standard Hose Coupling• Strong flow to remove debris
Pearl Blade RollerNon-marking wheels
*Angle G
rinder not includ
ed
1 Year LimitedWarranty
Tool Picture Shows Optional Diamond Blade
6001
-030
3
Comes with waterfeed attachment
for 4” and 4-1/2” grinders
Package DealGet 10 - 14” tall segment dry-cut diamond blades
and the 14” Makita 5.6HP Cut-off Saw.$1,499.00
4903-0022 $929.00
4903-0004 $62.00
4903-0006 $56.65
4903-0021 $50.50
29
DIAMoND BLADES
High speed, performance in cutting of general purpose concrete.
General PurposeDiamond Blades
Size Item # Price4” 0508-0725 $16.95
4.5” 0508-0726 $19.955” 0508-0727 $22.956” 0508-0728 $29.95
High speed, value plus performance in cutting of general purpose concrete.
value PlusConcrete Blades
Eagle Diamond turbo Blades10MM Height - Premium
Fast cutting laser welded turbo blades designed for stone and tile.
Premium diamond blades at a competitive price. Use wet or dry
Size Item # Price4” 0508-0423 $13.00
4.5” 0508-0424 $14.005” 0508-0425 $15.006” 0508-0426 $20.00
Arbor Chart4” to 6”
5/8”- 20mm- 7/8”- 4 Hole
7” to 8”
5/8”- ◊- 7/8”
9” to 14”
20mm-7/8”-1”
7” ◊ 0508-0427 $30.008” ◊ 0508-0428 $40.009” 0508-0429 $50.00
10” 0508-0430 $60.0012” 0508-0431 $70.00
Turbo Blades
The blade is designed for optimal performance in cutting granite, marble & hard stone. Close blade serration insures chip free - fast cutting performance. Super High 10mm large segment height. 5/8 - 7/8 Arbor.
Arbor Chart4” to 6”
5/8”- 20mm- 7/8”- 4 Hole
7” to 8”
5/8”- ◊- 7/8”
9” to 14”
20mm-7/8”-1”
Size Item # Price4” 0508-0286 $19.95
4.5” 0508-0289 $24.955” 0508-0287 $29.956” 0508-0694 $39.95
7” ◊ 0508-0370 $54.958” ◊ 0508-0616 $59.95
Use wet or dry.
• Premium diamond• 10mm kerf height!• Chip-free cuts!
7” ◊ 0508-0729 $39.958” ◊ 0508-0730 $49.9510” 0508-0731 $59.9512” 0505-0075 $79.9514” 0513-0009 $89.95
Arbor Chart4” to 6”
5/8”- 20mm- 7/8”- 4 Hole
7” to 8”
5/8”- ◊- 7/8”
10” to 14”
20mm-7/8”-1”
Arbor Chart12” to 14”
20mm-7/8”-1”Size Item # Price14” 0505-0072 $59.00
2 for $99
DIAMoND BLADES
30
T-REX Diamond Blade
Great for curve cutting machines. Also the ideal blade for use with an angle grinder for cutting curved areas and light grinding. The T-segments protrude from both sides of the bladewhich helps prevent it from binding in the cut.
use wet or dry
Size Item # Price4.5” 0508-0316 $35.255” 0508-0317 $38.50
7” ◊ 0508-0318 $47.50
Arbor Chart4.5” to 5”
5/8”- 20mm- 7/8”- 4 Hole
7”
5/8”- ◊- 7/8”- 4 Hole
tuck Point Rodding Diamond Blades
The kerf is used for slotting & cutting grooves and notches in granite & other stones. Can also be used for cleaning out mortar joints on masonry structures.
7/8”-20mm-5/8” Arbor
Size Thick Item # Price3” 4mm 0508-0707 $49.005” 4mm 0508-0708 $69.00
Flush Mount AdaptersFlush adapters make the back side of the blade flush allowing difficult flush cuts to be achieved. Very popular with sculptors, stone and finish cutters using right angle grinders for surface relief cutting, pitching lines and intricate cutting. The steel 4-hole adapter is for 4” - 7” blades. The steel 8-hole adapter is for 8” - 14” blades. Most of the blades we sell accommodate these adapters’ hole patterns, just ask when ordering.
Description Item # Price4-Hole
Stainless Steel 0501-0045 $19.95
Description Item # Price8-Hole
Stainless Steel 0501-0046 $29.95
Crack Chaser Blade
Size Item # Price4” 0504-0003 $62.00
4.5” 0504-0009 $65.425” 0504-0002 $68.007” 0504-0006 $96.008” 0504-0007 $113.00
Designed for opening or widening cracks and imperfections. Allowing for easier repairing.
Euro Turbo Blade
Size Seg. Item # Price4” 100mm 0508-0038 $19.95
4.5” 115mm 0508-0039 $24.955” 125mm 0508-0040 $29.956” 150mm 0508-0065 $34.95
7” ◊ 180mm 0508-0066 $39.958” ◊ 200mm 0508-0067 $49.959” 220mm 0508-0068 $59.95
Arbor Chart4” to 6”
5/8”- 20mm- 7/8”- 4 Hole
7” to 8”
5/8”- ◊- 7/8”
9”
20mm-7/8”-1”
This blade is designed for fast cutting performance & extruded diamond sides to prevent binding in the cut. The diamond bond is universal for use in all stone, concrete & masonry.
use wet or dry
Size Thick Item # Price3” 1/4” 0508-0615 $49.004” 1/4” 0508-0419 $49.005” 1/4” 0508-0421 $59.007” 1/4” 0508-0628 $99.00
31
EtCHING
1 Year LimitedWarranty
Blue Diamond Electroplated 1/4” & 6mm Shaft Die Grinder Tools
30/40 Diamonds 50/60 Diamonds (Standard) 1/4” Shaft 6 mm Shaft 1/4” Shaft 6 mm Shaft
Description # Item # Price Item # Price Item # Price Item # Price5/32” Dia Blunt x3/8” lg 1 - - - - 1912-0064 $18.00 1912-0090 $18.001/4” Dia Blunt x 1/2” lg 2 1912-0125 $22.00 1912-0149 $22.00 1912-0065 $21.00 1912-0091 $20.001/4” Dia Blunt x 3/4” lg 3 1912-0126 $23.50 1912-0150 $23.00 1912-0066 $22.00 1912-0092 $22.00
1/4” Dia Blunt x 1 1/2” lg 4 1912-0127 $28.50 1912-0151 $28.00 1912-0067 $25.00 1912-0093 $25.003/8” Dia Blunt x 3/8” lg 5 1912-0128 $23.50 1912-0152 $20.00 1912-0068 $18.00 1912-0094 $17.003/8” Dia Blunt x 3/4” lg 6 1912-0129 $22.00 1912-0153 $22.00 1912-0069 $19.00 1912-0095 $18.501/2” Dia Blunt x 3/4” lg 7 1912-0130 $28.50 1912-0154 $28.00 1912-0070 $23.00 1912-0096 $23.001/2” Dia Blunt x1 1/2” lg 8 1912-0131 $39.00 1912-0155 $38.00 1912-0071 $28.00 1912-0097 $27.005/8” Dia Blunt x 3/4” lg 9 1912-0132 $35.00 1912-0156 $35.00 1912-0072 $27.00 1912-0098 $27.00
1/4” Sphere End x 3/8” lg 10 1912-0133 $22.00 1912-0157 $22.00 1912-0073 $20.00 1912-0099 $20.003/8 “ Sphere End x 3/4” lg 11 1912-0134 $30.00 1912-0158 $30.00 1912-0074 $27.00 1912-0100 $27.501/2 “ Sphere End x 3/4” lg 12 1912-0135 $37.00 1912-0159 $37.00 1912-0075 $25.00 1912-0101 $25.00
1/2” Bullet x 3/4” lg 13 1912-0136 $38.50 1912-0160 $38.00 1912-0076 $37.00 1912-0102 $37.00Pointed 14 - - - - 1912-0077 $14.00 1912-0103 $12.50
Dove Tail 5/8” dia 15 1912-0137 $33.50 1912-0161 $35.50 1912-0078 $30.00 1912-0104 $30.00Cone 1/2” dia x 3/4” lg 16 1912-0138 $32.00 1912-0162 $32.00 1912-0079 $29.50 1912-0105 $30.00
Cone 3/4” dia x 1 1/8” lg 17 1912-0139 $36.50 1912-0163 $36.50 1912-0080 $27.00 1912-0106 $27.001/2” dia Ball 18 1912-0140 $25.00 1912-0164 $25.00 1912-0081 $22.50 1912-0107 $22.003/4” dia Ball 19 1912-0141 $35.00 1912-0165 $35.00 1912-0082 $28.00 1912-0108 $28.001” dia Ball 20 1912-0142 $42.00 1912-0166 $42.00 1912-0083 $44.00 1912-0109 $35.00
1” dia x 1/8” Disc 21 1912-0143 $35.00 1912-0167 $35.00 1912-0084 $30.00 1912-0110 $30.001” dia x 1/4” Disc 22 1912-0144 $37.00 1912-0168 $37.00 1912-0085 $30.00 1912-0111 $25.001” dia x 3/4” Disc 23 1912-0145 $50.00 1912-0169 $50.00 1912-0086 $43.00 1912-0112 $40.00
11/2” dia x 1/4” Disc 24 1912-0146 $57.00 1912-0170 $57.00 1912-0087 $55.00 1912-0113 $47.002” dia x 1/4” Disc 25 1912-0147 $100.00 1912-0171 $100.00 1912-0088 $86.00 1912-0114 $80.00
1” dia x 1/4” rad. Edge Disc 26 1912-0148 $35.00 1912-0172 $35.00 1912-0089 $27.00 1912-0115 $27.00
Madein U.S.A.Madein U.S.A.
Features: • 1/4” collet capacity • Double insulated • Stepped neck of solid aluminum housing for added durability• High speed (25,000 RPM) for maximum production • 120 Volts, 3.5 AMP hi-tech motor• AC/DC switch for use with alternative power source• Vent slots designed to direct exhaust air away from the user
GDo601 Die Grinder
1703-0054 $119.00
1234
567
89
10
11
12
13
14
15
16
18
17
19
20
21
22
23
24
25
26
AGGREGAtES
32
Staley BlackGranite Aggregate
Cibola GoldGranite Aggregate
Dark Baldwin RedGranite Aggregate
Mt AiryGranite Aggregate
HazelGranite Aggregate
tan Quartzite Granite Aggregate
CS AmberGlass Aggregate
Crushed MirrorGlass Aggregate
Forest GreenGlass Aggregate
Co BlueGlass Aggregate
Size Item # Price1 lb. 7010-0001 $3.25
Size Item # Price1 lb. 7010-0002 $3.25
Size Item # Price1 lb. 7010-0003 $3.25
Size Item # Price1 lb. 7010-0004 $3.25
Size Item # Price1 lb. 7010-0005 $3.25
Size Item # Price1 lb. 7010-0008 $6.50
Size Item # Price1 lb. 7010-0006 $3.25
Size Item # Price1 lb. 7010-0009 $6.50
Size Item # Price1 lb. 7010-0010 $6.50
Size Item # Price1 lb. 7010-0011 $6.50
5 lbs / each = 15% OFF • 10 lbs / each = 25% OFFFor Larger Quantities call for discount.
33
AGGREGAtES
AquaGlass Aggregate
t BlueGlass Aggregate
CA RedGlass Aggregate
BlackGlass Aggregate
Go AmberGlass Aggregate
Washington White Granite Aggregate
Antique GreenGranite Aggregate
White RoseConcrete Aggregate
DMC old YellowGranite Aggregate
Milk White Glass
Aggregate
Size Item # Price1 lb. 7010-0012 $6.50
Size Item # Price1 lb. 7010-0013 $6.50
Size Item # Price1 lb. 7010-0014 $6.50
Size Item # Price1 lb. 7010-0015 $6.50
Size Item # Price1 lb. 7010-0016 $6.50
Size Item # Price1 lb. 7010-0017 $3.25
Size Item # Price1 lb. 7010-0018 $3.25
Size Item # Price1 lb. 7010-0019 $3.25
Size Item # Price1 lb. 7010-0020 $3.25 Size Item # Price
1 lb. 7010-0023 $6.50
5 lbs / each = 15% OFF • 10 lbs / each = 25% OFFFor Larger Quantities call for discount.
MIXERS
34
IMER Minuteman II & Wheelman IIPortable MultiMixers The Minuteman and Wheelman continue to reign as
the “World’s Finest Portable Concrete Mixers”. Like all champions, the Minuteman and Wheelman are a unique blend of power, speed and reliability.
MINUTEMAN II WHEELMAN IIDrum capacity 5 cu. ft. 5 cu. ft.
Batch output 275 lbs., 2.5 cu.ft. 200 lbs. 2 cu. ft.
Motor rating 1/2 HP 110V / 6Amp 1/2 h.p. 110v / 6Amp
Gas Engine n/a Honda 3 h.p.
Drum diameter 24” 24”
Discharge outlet height 21” 8 21” w/stand
Wheel size 10” 14” pneumatic tires
Weight 120 lbs. elec. 101 lbs., gas 115 lbs.
Speed: Mix 200-275 lbs. of mortor, stucco, grout, or concrete in less than 4 min.
Gas Power: Working on a jobsite without electrical power, no problem, the Wheelman is available in a 3 HP Honda engine.Portability: In just a minute, the Minuteman or Wheelman can be “knocked down” into 3 easy to load components. Allthis by one person, with no toolsrequired!
Poly Drum is only available on the Wheelman.
Power: The fully enclosed 1/2 HP 110Vindustrial grade motor with directgear drive provides non-stopperformance on any constructionproject. These mixers truly arecontractor-duty!
IMER Workman II 250-350-420towable MultiMixers
Innovation & Safety: The autostop dump wheel is made possible by a special bearing and seal system available from the aviation industry. When you stop rotating the dump wheel it locks in place, automatically!
WORKMAN II 250 350 420Drum capacity 9 cu. ft. 12 cu. ft. 14.5 cu. ft.
Batch output 6 cu. ft. (good) 9.5 cu. ft. (very good) 11.5 cu. ft. (HUGE)
Electric motor rating 1.5 HP 110/220V 1.5 HP 110/220V 1.5 HP 110/220V
Gas engine 5.5 HP Honda 5.5 HP Honda 5.5 HP Honda
Diesel engine N / A 5 HP Yanmar 5 HP Yanmar
Drum diameter 27.5” 32.5” 38”
Discharge outlet height 27.5” 26.5” 27”
Pneumatic wheels 20” 20” 20”
Weight 525 lbs. 650 lbs. 900 lbs.
Towing Safety: Full width fenders and torsionbar suspension provide a smooth cruise to and from the jobsite.
Power: Direct drive gearbox to the drum, no more external drive gears! This drive system is whisper quiet and is sealed for life… no maintenance required!
Reliability: The jig-welded box steel frame isvery strong and rigid, and includes a built in work platform. Tilt the mixer back, drop the support legs, and you have a mini batch plant.
Economical Power:
Now available with Yanmar DieselPower, run all day on 2 quarts of fuel!
Extra Value:
Every mixer from IMER USA comes with a commercial duty tow hitch,not some welded on cheapie.
1002-0016 $599.00Gas 1002-0009 $925.00
Electric 1002-0020 $699.00
Gas 1002-0003 $2,549.00Electric 1002-0018 $2,649.00
1002-0048 $2,849.001002-0060 $2,999.00
1002-0061 $3,899.001002-0062 $3,999.00
Extra Value:
Every mixer from IMER USA comes with a commercial duty tow hitch,not some welded on cheapie.
Extra Value:
Every mixer from IMER USA comes with a commercial duty tow hitch,not some welded on cheapie.
35
MIXERS
IMER Henchman 2 HSMtowable Horizonal Shaft Mortar Mixers
The Henchman 2 HSM has the most reliable and powerful paddle drive system ever designed and manufactured for a 9 cu. ft. mortar mixer. No more jackshaft bearings, idler springs and exposed drive gears to maintain and worry about. The mixing paddles are driven by an enclosed oil bath gearbox and a huge centrifugal clutch. Run the Henchman 2 hard all day… everyday!
IMER Henchman 4 HSMtowable Horizonal Shaft Mortar Mixers
The Henchman 4 HSM is ready to take on the toughest high production jobs. Hydraulic power and a revolutionary paddle design make the Henchman 4 the perfect partner for the Spec Mix Silo delivery system. Batch out 12 cu. ft. every 3 minutes. GUARANTEED!
Production & Inovation: The FOLIUM II paddle design gets the job done. Laser cut paddles create lots of shear action - mixing a batch in 3 minutes is no problem.
Hydralic Power Pack: The 13 HP Honda powered hydraulic drive system is a very economical design. The controls, the fittings, and the hoses that transfer the hydraulic power are routed in a well-engineered fashion. Run this system hard – Day in and Day out!
HENCHMAN 2 HSMDrum capacity 9 cu. ft.
Batch output 7 cu. ft. (2½ bags)
Gas engine 8 HP Honda or 7 HP Subaru Robin
Drum diameter 24”
Discharge outlet height 28”
Pneumatic wheels 20”
Weight 650 lbs.
HENCHMAN 4 HSMDrum capacity 16 cu. ft.
Batch output 12 cu. ft. (4-5 bags)
Gas engine 13 HP Honda
Drum diameter 33”
Discharge outlet height 28”
Pneumatic wheels 22”
Weight 1,145 lbs.
Safety: Full width fenders prevent road spray from being thrown onto the mixer frame and other vehicles. The torsion bar suspension provides both compression and rebound dampening. Towing performance is the best in the industry, no contest.
Toughness: The jig welded box steel frame is strong and very rigid. Many times stronger than our competitors’ channel steel frames.
Innovation: Hydraulic dump action allows for quick n’ complete discharge with finger tip control.
Production: Our all new FOLIUM II paddle design mixes all materials quickly and thoroughly, including aggregates up to 3/8”.
Power: Hydraulic drive eliminates all kinds of maintenance - no more drive shaft problems, just run it hard.
Safety: Torsion bar suspension with compression and rebound dampening provides a smooth tow at all times.
Gas 1002-0063 $2,899.00
Gas 1002-0064 $5,799.00
360 MBP
750 MBP
MIXERS
36
IMER Mortarman 120Portable vertical Shaft Mixers
The Mortarman 120 is perfect for the 2-3 person construction crew. Why go through all the hassles of towing a mixer to the jobsite, when the Mortarman 120 can make a wheelbarrow of mortar, stucco, grout or dry pack mortar every 3 minutes!
IMER Mortarman 360/750 vertical Shaft Mixers
Output has been increased to 9-18 cu. ft. of mud every three to four minutes - perfect partners for busy precast mixing operations system. The discharge systems is now easier to open and close and better protected from being hit by the mud bucket or forklift. The safety grate has been improved, it is now hinged. Access for clean-up is immediate and complete. Mini Batch Plant production for the cost of a mortar mixer.
Set Up: The stability legs slide outward to accommodate a wide variety of mud pans. They can also be adjusted up or down depending upon the desired discharge height. These extra wide stability legs are standard on the Mortarman 750 MBP and are available as an accessory kit for the Mortarman 360 MBP.
Production: Further study and testing have lead to drum and paddle design changes that vastly improve batch output, mix 800 to 1,600 lbs. of material every load. Mini Batch Plant production for the cost of a mortar mixer.
MORTARMAN 360 MBP 750 MBPDrum capacity 12 cu. ft. 22 cu. ft.
Batch output 9 cu. ft., 800 lbs. 16-18 cu. ft., 1,600 lbs.
Drum diameter 38” 52”
Discharge outlet height 30” 30”
Pneumatic wheels 18” 22”
Weight 800 lbs. 1,700 lbs.
Electric motor rating 5 HP 220V 1ø or 3ø 5 HP 220V 1ø / 7.5 HP 220V 3ø
Gas engine 11 HP Honda 13 HP Honda w/elec. start
MORTARMAN 120Drum capacity 4.5 cu. ft.
Batch output 2.2 cu. ft. / 175 lbs.
Motor rating 1 HP 110V, 12 Amp.
Paddle speed 32 RPM
Drum diameter 27”
Machine weight (boxed) 192 (220) lbs.
Wheel size 12”
Electric 1002-0065 $1,899.00
Gas 1002-0066 $4,499.00Electric 1002-0049 $4,799.00
1002-0067 $7,899.001002-0069 $7,999.00
37
MIXERS
Collomix SeriesHand Mixers - Single Shaft CX - HF Series - Handmixer with HEXAFIX® System
CX100HF - Hand-Held Mixer, 110V 7.0 Amp, 1.1 HP, 1-Gear 790 RPM, w/WK120HF PaddleCX300HF - Hand-Held Mixer, 110V 7.0 Amp, 1.1 HP, 2-Gear 470/890 RPM, w/WK120HF PaddleCX600HF - Hand-Held Mixer, 110V 10.4 Amp, 1.7 HP, 2-Gear 490/620 RPM, w/MK140HF PaddleCX100HFE - Hand-Held Mixer, 230V 4.4 Amp, 1.1 HP, 1-Gear 670 RPM, w/WK120HF PaddleCX400HFE - Hand-Held Mixer, 230V 6.0 Amp, 1.8 HP, 2-Gear 500/850 RPM, w/WK140HF PaddleCX600HFE - Hand-Held Mixer, 230V 7.1 Amp, 2.2 HP, 2-Gear 420/630 RPM, w/MK160HF Paddle
Paddles for Hand Mixers
FM80S - Paddle, 3 1/8” Dia., 15 3/4” length, chucksize 3/8”, for 10-20 lb mixesFM100S - Paddle, 4” Dia., 23 1/4” length, chucksize 1/2”, for 20-50 lb mixesFM120HF - Paddle, 4 3/4” Dia., 23 1/4” length, chucksize 3/4” and HEXAFIX®, for 40-65 lb mixes
WK90S - Paddle, 3 1/2” Dia., 20” length, chucksize 3/8”, for 15-25 lb mixesWK100S - Paddle, 4” Dia., 23 1/4” length, chucksize 1/2”, for 20-30 lb mixesWK120HF - Paddle, 4 3/4” Dia., 23 1/4” length, chucksize 3/4” and HEXAFIX®, for 20-30 lb mixesWK140HF - Paddle, 5 1/2” Dia., 23 1/4” length, chucksize 3/4” and HEXAFIX®, for 30-65 lb mixes
FM Series - Low viscous Materials, Wallpaints, Lacquers Material Flow: from top to the bottom
WK Series - sticky, high viscous materials; adhesives, ready-mix plasters, fillersMaterial Flow: from bottom to the top
1002-0053 CX100HF $279.001002-0054 CX300HF $398.001002-0055 CX600HF $539.001002-0056 CX100HFE $269.001002-0057 CX400HFE $448.001002-0058 CX600HFE $539.00
1010-0041 FM80S $11.00 1010-0042 FM100S $15.00 1010-0043 FM120HF $30.00
1010-0044 WK90S $15.00 1010-0045 WK100S $24.00 1010-0046 WK120HF $32.00 1010-0047 WK140HF $37.00
1.4 in.to
2.6 in.
NEW
Clamping
Range!
LIFtING & HANDLING
38
The Sink Hole Saver™ by Omni Cubed is an innovative stiffening device that protects finished concrete countertops from breakage during lifting, transport and installation. The product stays together as one unit, which makes it very convenient to use. Large, easy-grasp clamp knobs make the clamps effortless and quick to tighten. The stiffening rail is very strong, yet light-weight, and features a sliding channel for custom placement of each clamp. Sink Hole Savers can be applied in the shop and left on the countertop all the way to and through the install!
Available in 4, 6, and 8 ft. lengths.
USA Patents Pending
omni Cubed Concrete Edition Sink Hole Saver™
BENEFITS- Helps prevent breakage- Fast and easy to use- Effortless tightening of knobs- Useable on A-frames during transportation- Use in the shop and through the install
FEATURES- Attaches in seconds and stays secure until removal- Large, easy-grasp tightening knobs- Strong stiffening rail spans entire length of countertop- Sliding rail channel which allows custom placement of individual clamps- Inexpensive replacement parts- Long lasting, quality materials that won’t rust- Works great on backsplashes- Available in three lengths
4 ft 2525-0033 $219.95 /ea.6 ft 2525-0034 $284.95 /ea.8 ft 2525-0035 $329.95 /ea.
0 to 270° of rotation!
SHS Angle Bracket
The SHS Bracket is used for safetransportation of angled countertop pieces.
2525-0030 $98.50 /ea.
• Works great for carrying thick concrete countertops• Enables 2 to 4 installers to lift & carry countertops safely • The more weight lifted, the tighter the clamp grips• Clamp designed to “hold onto” top when not in use & tension can be adjusted• Tear resistant, silicone rubber gripping pads won’t mark or stain surfaces• Comfortable foam rubber handle grips • High quality, precision-machined aluminum arms• Inexpensive replacement parts• One set includes two clamps & free carrying/storage case• 500 pound capacity per pair
Mega-Jaw™ Carry Clamp
2507-0065 $259.95/set
Carry tops up to 2.6” thick!
39
LIFtING & HANDLING
NEW RuBBER GRIPPING ACtIoN!
The DP Carry Clamps allow you to safely lift and carry your stone without hurting your back. Clamp design uses the weight of the stone to provide clamping action. That means the heavier the load, the more clamping action. Sold in pairs. Max opening: 1¾”
Carry Clamps Stone Pro Cross Carry Strap
Use your legs to lift
Shoulder the load for vertical or omni-directional movement.
2507-0020 $239.002510-0013 $98.00
Site trolley
Self-Locking trolley
• 2 pneumatic rubber: 10 1/4 “x 2 1/4”• Bottom, sides and upper edges of the channel rubber padding. • Load capacity: 660 lbs• Weight: 17 lbs• Support plate: 1’ - 3 7/10” x 3 9/10”• Wheelbase: 3 9/10”
• Grips material automatically and securely. • Clamping supports and base are rubber padded. • 2 rubber wheels: 16” x 3 ¼”• Loading capacity: 880 lbs• Weight: 65 lbs• Length of support plate: 20” • Wheelbase:21” • Clamp width: 0-6 “
Slab trolley• 2 solid rubber wheels: 7 9/10” x 2”• Bottom, sides & top edges of channel are rubber padded.• Loading capacity: 660 lbs• Weight: 19 lbs• Support plate: 1’ - 3 7/10” x 3 9/10”• Wheelbase: 3 9/10”
GCTGCT
GCT
2511-0023 $349.00
Ideal for moving kitchen tops and other heavy work pieces onto work site. Large pneumatic wheels make moving heavy loads over rough terrain easy.
2517-0022 $109.00
2511-0022 $99.00
Groves transport Racks
Casters Wheels (optional)
• Fork lift hoops mounted on the sides.• Bottom pads and uprights have full length rubber strips.• Hot dip galvanized finish.• Quick release mounting pins change the transport rack from mobile to stationary quickly.
Groves Double Sided Heavy Duty Shop Carts
Heavy Duty
• Rugged 4,000 lb. capacity. • Rubber is mounted on base & upright supports to help protect material. • Six ratchet straps are included to secure load. • 8” casters, two rigid and two swivel with brake rated at 1000 lbs. each.
Groves Single-SidedShop Cart
• Holds fabricated parts. • Easy clean-up with hose. • Removable top A-frame for economical shipping. • 7” ledge depth. • 10” diameter pneumatic tires. • 5” diameter swivel locking casters. • 2,000 lb. capacity.
Dimensions: 40” L x 24” W x 36” H
Type Size Capacity Overall Height
Height With
CasterItem # Price
TR4482 44” x 82” 4,000lbs 58” 69” 2516-0026 $1,150.00TR4496 44” x 96” 4,000lbs 70” 81” 2516-0025 $1,450.00
Caster Kit - - - - 2516-0036 $100.00
Size Weight Item # Price54” L x 38” W x 48” H 215 lb. 2515-0025 $550.0084” L x 40” W x 48” H 360 lb. 2515-0026 $735.0084” L x 42” W x 72” H 460 lb. 2515-0027 $895.002516-0118 $295.00
LIFtING & HANDLING
40
PRo-DoLLY™Seam Setter vC2
Great seams, without the hassle!
The Seam Setter VC2 is a worry-free solution for achieving high-quality seams. Large 6” cups handle heavy stone tops with ease. The powerful, yet compact, vacuum pump maintains pressure or all cups and operates on AC Power or a single 9V battery (for installations where electricity is not available).
2510-0044 $695.00
2517-0019 $337.50/ea
• Use alone or in pairs for moving very large & heavy countertops• Low-profile cart allows rolling of tall tops through doors• Flat-free tires reduce potential breakage caused by vibrations• Extremely stable; no worries of cart tipping over• Portable and lightweight cart (only 20 lbs)• Clamps material thicknesses up to 69 mm (2.7 inches)• 750 pound capacity per dolly (1,500 for pair)
6ft. long Slab DollyThis dolly can transport a complete 7’ x 10’ stone slab. The heavy gauge steel tube is carpeted and is 6’ long x 1-1/2” wide. Four adjustment pins help hold the slab in place for transport. The two center wheels are 10” high and the four outer wheels are 8” high and made of heavy duty solid rubber. This design makes it easy to turn the slab in any direction.
GrovesSlab Dollies
Maneuvers easily indoors and out. 3” wide neoprenerubber. Pneumatic tires reduce breakage causedby vibration, 12” width measured from outside of wheels adds stability, 1,000 lb. capacity using 10” tires and 4” casters, 500 lb. capacity using 8”tires and 3” casters.
Now able to hold 6cm!
2517-0007 $478.00Length /wheel size Item # Price
36”L/10”wheels 2517-0003 $151.0048”L/10”wheels 2517-0002 $177.0072”L/10”wheels 2517-0006 $209.0048”L/8”wheels 2517-0011 $167.0072”L/8”wheels 2517-0009 $198.00
TILT
41
LIFtING & HANDLING
PRo-CARtAt1
2517-0016 $647.95
2517-0017 $165.00/set
2517-0018 $99.00/kit
Multi-topAccessory
forPRo-CARt
Folding Kit for PRo-CARt• Clamps to countertop, so you can pick it up over curbs, etc.• Lightweight aluminum construction under 50 pounds• All-terrain pneumatic casters easily handle gravel, dirt, grass, and curbs while dampening vibrations• Cart wheels can rest on stair treads• Compact design fits into tight spaces• Ships via UPS, so there is no expensive freight charges• Optional Folding Kit upgrade available for convenient storage
Don't settle forcheap imitations,get the original,
made in the UsA!
Madein U.S.A.Madein U.S.A.
Work tables• Heavy Duty 8” Rubber Swivel Cast Tires with Brakes - 500 lbs Capacity Each • Middle Stabilizer Bar on top is removable to use cart as a work table for sink cut outs • 55° - 80° Maximum Tilt with two 25° stops• Three slab holder wedges on 96” tables, and two on 72” tables.• 36” to 40” Height Adjustment • 1,500 lbs capacity
*All carts ship broken down for lowest cost shipping*
GCT
Size Item # Price96” x 24” 2517-0010 $695.0072” x 35” 2515-0020 $795.0096” x 35” 2515-0018 $895.00 96” x 48” 2515-0016 $995.00
96” x 72” Crankoperated Slab table
• Heavy Duty 8” Rubber Swivel Cast Tires with Brakes - 500 lbs Capacity Each • 80° tilt with two safety pin locks• Four slab holder wedges included• Middle stabilizer bar on top is removable to use cart as a work table for sink cut outs • 36” to 40” Height Adjustment • 1,500 lbs capacity
GCT
2516-0044 $1,995.00
Madein U.S.A.Madein U.S.A.
TILT
RIvAL (matte)Color Intensifying Impregnator
This protective treatment enhances the natural color of all rough natural stone surfaces without producing any gloss. It prevents water from penetrating into the stone surface. The repellent effect simplifies cleaning. Slip resistance and the stone’s ability to breathe are not affected. Suitable for indoor and outdoor use.
Size Item # Price1 liter 0710-0355 $29.505 liters 0710-5355 $129.99
RIvAL (gloss)Color Intensifying Sealer
This treatment enhances the natural color of rough natural stone surfaces by forming a hard-wearing protective film. This glossy film prevents water & oil from penetrating into the stone surface. The repellent effect simplifies cleaning. Suitable for indoor use only.
Size Item # Price1 liter 0710-0357 $31.995 liters 0710-5357 $144.99
RIvALCement Residue & Rust Remover
RIvALHeavy Duty Cleaner
This special acidic cleaner is ideally suited for removing all anorganic dirt deposits, such as cement and mortar residues, lime scale and water marks, rust and rust discoloration. Suitable for acid resistant stone only.
This special cleaner is ideally suited for occasional deep cleaning or for the final cleaning after construction. Removes all kinds of heavy dirt and can even be used to remove cement residues from marble and other sensitive natural stones.
Size Item # Price1 liter 0702-0725 $20.995 liters 0702-5725 $95.99
Size Item # Price1 liter 0703-0515 $13.955 liters 0703-5515 $84.95
CARE & REPAIR
42
The Ager Tiger is suitable to darken up the color of exotic resined granite. Sometimes these granites are darker then normal due to the kind of epoxy resin used in the manufacturing process. Ager Tiger will match the color of the lighter edge with the surface in just one or two applications.
Tenax Ager is generally applied to sanded or smooth surfaces to give the stone a wet look. It can also be applied to polished surfaces to enhance color. Suitable for indoor or outdoor use on stones of all types including marble and granite.
Ager tiger Ager
0706-0008 $57.000706-0037 $76.95
Powder tints are available in the following 7 colors:
Stone Dust is available in the following 7 colors:Color Item # Price
White 0301-0132 $6.59Yellow 0301-0129 $6.59Gray 0301-0130 $6.59Black 0301-0131 $6.59Rust 0301-0133 $6.59
Green 0301-0134 $6.59Brown 0301-0135 $6.59
KIT 6001-0254 $43.00
Color Item # PriceWhite Quartz 0301-0126 $6.59Red Granite 0301-0123 $6.59White Marble 0301-0127 $6.59Brown Granite 0301-0124 $6.59Black Granite 0301-0128 $6.59Pink Granite 0301-0125 $6.59Grey Granite 0301-0122 $6.59
KIT 6001-0255 $43.00
riVAl
RIVAL PolyesterResin Products
Madein U.S.A.Madein U.S.A.
Extra Hardener
• Accepts polyester coloring to match stone colors and hide bond lines.• Smooth texture for a finish as smooth & brilliant as polished stone.• Neutral color blends well with a variety of stone colors.
Polyester Coloring Paste
Desc. Item # PriceTransparent Flowing - Quart 0303-0092 $11.95Transparent Flowing - Gallon 0303-0093 $39.95Transparent Flowing - 5 Gal 0303-0094 $139.95Transparent Knife Grade - Quart 0303-0095 $11.95Transparent Knife Grade - Gallon 0303-0096 $39.95Transparent Knife Grade - 5 Gal 0303-0097 $139.95
Small (1 oz.) 0303-0099 $2.20Large (4 oz.) 0303-0100 $3.00
Colorants (1oz)
White, Black, Red, Red-Brown, Ochre, Green, Blue, & Fawn Brown
Color Item # PriceBuff 0303-0120 $3.35Gray 0303-0121 $3.35
Ochre 0303-0116 $3.35Black 0303-0112 $3.35Red-
Brown 0303-0114 $3.35
Green 0303-0117 $3.35Brown 0303-0119 $3.35Blue 0303-0118 $3.35Red 0303-0115 $3.35
White 0303-0113 $3.35
43
ADHESIvES
These products consist of a two-part resin and hardener that have a quick set-up time and create a strong, durable bond that can be polished to a high gloss finish. Resins available in knife-grade or flowing: Clear, Transparent, White, Black, and new, super clear Platinum. (Not for structural support).
Extra Hardener
Polyester Resin Products Size Desc. Item # PriceGAL RESIN 4500 Knife-grade 0303-0059 $102.74GAL RESIN 4500 Flowing 0303-0027 $98.28LT 1000 TRANS Knife-grade 0303-0022 $23.42LT 1000 Transparent Flowing 0303-0018 $22.13
10 LT 1000 Transparent Flowing 0303-0086 $178.37LT 1000 Platinum Flowing 0303-0089 $27.00LT 1000 Platinum Knife-grade 0303-0023 $26.60
10 LT 1000 Platinum Knife-grade 0303-0088 $176.70LT LITER BUFF Knife-grade 0303-0025 $23.42
900 ml H20 CRYSTAL CLEAR Knife-grade Translucent 0303-0074 $27.75
900 ml H20 CRYSTAL CLEAR Flowing Translucent 0303-0020 $27.75
900 ml Acrylic - Tan 0303-0026 $44.49
Small (20G) Liquid 0303-0004 $4.25Small (30G) Paste 0303-0003 $4.25
Large (150G) Paste 0303-0014 $16.77
1 OZ. TubesEpoxy colors Resin colors
Color Paste Kits
1 OZ. TubesColor Item # PriceRed 0303-0005 $6.00
Red-Brown 0303-0006 $5.35White 0303-0007 $5.35Black 0303-0008 $5.50Ochre 0303-0009 $5.35Green 0303-0010 $5.35Brown 0303-0011 $5.35Blue 0303-0012 $6.00
Assorted 0303-0024 $44.25
Color Item # PriceRed 0301-0003 $6.00
Red-Brown 0301-0010 $6.00White 0301-0005 $5.35Black 0301-0006 $5.50Ochre 0301-0007 $5.35Green 0301-0008 $5.35Brown 0301-0004 $5.35Blue 0301-0009 $5.35
Assorted 0301-0042 $44.25
RIVAL Acrylic Super Penetrating
RIVAL travertine Spackle
• Very low viscosity penetrates fine cracks and fissures• Consolidates and strengthens weak or porous stone• Accepts polyester coloring to match stone colors and hide bond lines• Excellent for laminating stone on horizontal surfaces
• Smooth knifegrade consistency for filling, bonding & repairing travertine• Tinted adhesive matches the color of most travertine stone• Accepts polyester soling paste to adjust color
Qt. 0303-0107 $24.00Qt. 0303-0106 $19.25
ADHESIvES
44
Easy-Mix Dispensers
Edge System (tES)
Penetrating Epoxy RS (Rapid Set)
Colorantsfor Epoxies
The strongest adhesive bond available for stone lamination. This clear, flowing epoxy does it all. It’s water-clear, polishable, and unlike polyester and acrylic adhesives the Touchstone™ Edge System will not shrink. Lay down a thin, tight bond line, and bullnoses stay put. With Touchstone™ Edge System you never have to return to the job site to solve adhesive problems. Comes in sets of: Two-part A and One part B. Use with the Touchstone Easy-Mix Dispenser for perfect results every time. 2 hour set time at 70 degrees (heating will shorten time). Use Touchstone colorants or stone-dust to get the color match with the stone.
Touchstone™ Penetrating Epoxy RS has a 2-component water-like consistency. This very low viscosity product is developed for laminating, thin crack repair, and filling applications. Will not shrink. This exterior grade epoxy is
clear and has a fast set-up time. 1-2 hour set time @ 70°F.
Advantages:• 2 oz. and 8 oz. squeeze bottles• Liquid tints - easier mixing than paste tints• Squeeze bottles facilitate consistent color match• Even consistency throughout adhesive
Features:• Excellent stability• Rapid cure• Tack free in 10 minutes• Color consistent for color matching• Low shrinkage• Superior strength• Light cured film• Knife Grade
Polyester Resin
Extra Hardener1oz 0303-0077 $2.95
2 Qts (A), 1 Qt (B) 0301-0081 $88.002 Gal (A), 1 Gal (B) 0301-0119 $244.09
Dispenser with heater 0305-0004 $405.00
2 Qts (A), 1Qt (B) 0301-0076 $75.86 1 Qt. (B) 0301-0118 $38.602 Gals (A), 1Gal (B) 0301-0075 $219.00 1 Gal (A) 0301-0120 $106.00
Color 2 oz. Price 8 oz. PriceWhite 0301-0082 $6.95 0301-0115 $19.25Black 0301-0083 $6.95 0301-0099 $19.25Red 0301-0084 $6.95 0301-0159 $19.25
Red-Brown 0301-0085 $6.95 0301-0114 $19.25Blue 0301-0086 $6.95 0301-0160 $19.25
Yellow 0301-0087 $6.95 0301-0161 $19.25Brown 0301-0088 $6.95 0301-0110 $19.25Buff 0301-0089 $6.95 0301-0111 $19.25Gray 0301-0090 $6.95 0301-0112 $19.25
Green 0301-0091 $6.95 0301-0113 $19.25
10 Color (2oz)Tint Kit
(white, black, red, red-brown, blue, yellow, brown, buff,
gray, green)
0301-0092 $60.00
Qt. 0303-0061 $12.57
45
ADHESIvES
Waterjet Epoxy Clear Gel Epoxy
Express IIFlowing Epoxy Penetrating Epoxy
This high-strength 2-part adhesive is designed for bonding intricate assemblies of cut stone, inlays, and stone-on-metal projects. Waterjet epoxy forms a thin, tight bond for seamless joints involving variations in granite, marble, and tile. Available in quarts. The mix ratio is 2:1 by volume. 2 hour set time at 70°F
This epoxy is handy for joining countertops or laminating edges. The consistency of this knife-grade epoxy allows you to squeeze out thin bond lines, so that clamping doesn’t produce a mess of displaced adhesive. Easily tinted for true colors Clear Gel delivers high bond strength, is polishable, and sets up fast. Applying heat shortens set time. Touchstone Clear Gel Epoxy is a versatile product, it works great as a patching compound too.
Touchstone™ Express Flowing Epoxy is a two-part transparent epoxy that sets up in 45 to 60 minutes at 65°F and will enable the fabricator to work on the edge in half the time it takes for most epoxies.
Touchstone™ Penetrating, a low viscosity penetrating epoxy along with our mesh backing, will create effective reinforcement of your slab or countertop. This product penetrates the structural fissures of granite and marble and will adhere the mesh to the stone for added strength and integrity.
Dries completely clear and delivers high bonding strength is polishable and sets up fast. Knife-grade consistency. Accepts Touchstone colorants. For interior and exterior applications on: granite, marble, natural, and engineered stone. This smooth, Vaseline-like epoxy is ideal for joining countertops, laminating edges, repairing monuments, stone tiles, etc. Set time 2 hours at 75 degrees. Cure time 24 hours.
Clear Gel Epoxy
2Qts (A) 1Qt (B) 0301-0102 $71.75
600ml Cartridge 0301-0142 $31.07Dual Cartridge gun 0305-0028 $68.95
Large Applicator Tube 0305-0008 $2.60
2 Qts (A), 1 Qt (B) 0301-0276 $88.002 Gal (A), 1 Gal (B) 0301-0274 $272.95
2 Qts (A) 1 Qt (B) 0301-0080 $93.502 Gal (A) 1 Gal (B) 0301-0146 $328.25
Flowing 2 Qts (A), 1Qt (B) 0301-0076 $75.86Knife-Grade 2 Qts (A), 1Qt (B) 0301-0079 $83.21Knife-Grade 2 Gals (A), 1Gal (B) 0301-0077 $235.17
ADHESIvES
46
47
ADHESIvES
Single Sided Razor Blades
Best Quality
cases include 12 tubes
100% silicon and can withstand heat up to 400°! Water resistant!
RIVAL Silicone Sealant
Madein U.S.A.Madein U.S.A.
• For commercial, industrial and residential use • Permanently flexible • Excellent adhesion • No cracking, shrinking or chalking
Heavy Duty Caulking Gun
Rotating Head
Item# Color Price Ea.0301-0294 Clear $2.990301-0295 White $2.990301-0296 Beige $2.990301-0297 Black $2.99
10.3 oz 0305-0030 $19.95
Glue Stirring SticksMeasuring Cups Glue Spreaders
Plastic 4” wide. Sold in Boxes of 100
Pour Spouts
50 Pack 0305-0005 $8.50
Box 500 0305-0012 $8.50
Box 100 0305-0017 $28.95
Quart 0305-0003 $6.00Gallon 0305-0002 $6.50
0305-0011 $3.50/Box 100
0305-0035 $3.95/Box 100
Yellow Rain SuitRubber Apron
Deluxe HeavyDuty Apron
Apron
This heavy duty rubberized fabric is 2-ply neoprene-36”Wx48”L, and offers excellent protection to anyone working in water spray. This full length apron is made of durable material.
New patent pending, heavy-duty apron made especially for stone fabricators. Two velcro strips are on the front to hold replacement polishing pads. The apron also has 2 pockets in the front with dual closing design which can hold cell phones and other valuables.
The Alpha® Apron is uniquely designed to prevent the polishing worker from getting wet. Made of strong vinyl material. This apron is lightweight, comfortable, and easy to use. A flexible waistband keeps it in place so there are not any strings or knots to deal with. The Alpha® Apron can also be used to keep the dust associated with dry polishing from your clothing.
Three piece heavy duty rain suit with vented back, jacket, bib, and hood. Available in two sizes: large and extra-large.
Flexible Waistband
BULLET PROOF™Fabricator Apron
BULLET PROOF™ fabricator aprons are lighter, more durable, and safer than any other apron on the market. With the neoprene neck strap and lightweight/ultra tough Cordura you won’t even know you have it on. It is extra long and wide to keep your legs dryer and it buckles behind you to keep you safe.
Desc. Item # PriceOne Size
Fits All 4501-0018 $16.974501-0045 $19.95
4501-0003 $19.50
Size Item # PriceXXL 4501-0072 $19.00XL 4501-0039 $19.00L 4501-0040 $19.00
4501-0074 $52.95
GCT
MISC. EQuIPMENt
48
Abaco Waterproof Sleeve Protectors
Protects arms from getting wet during polishing. Lightweight, durable and flexible. 20” long. Velcro on top and a rubber bottom for watertight seal. Sold in Pairs
4501-0062 $21.85/pr.
China Markers
Excellent for most surfaces. Pull string to sharpen. Sold in boxes of 12.
Color Item # PriceBlack 2906-0009 $7.95/dzRed 2906-0010 $7.95/dz
Yellow 2906-0011 $7.95/dzWhite 2906-0012 $7.95/dz
Quick Jaw - Power Clamp & Spreader
Helps with the pain of not having to pull apart
your clamps to get them loose.
3 MODELS AVAILABLE:• 12” Quick-Jaw: 8”-20” Spread• 24” Quick-Jaw: 8”-32” Spread• 36” Quick-Jaw: 8”-44” Spread
Size Item # Price12” Quick-Jaw 2507-0035 $17.0024” Quick-Jaw 2507-0036 $20.5036” Quick-Jaw 2507-0037 $24.50
Wax CrayonsThese non-staining
waterproof crayons will mark on practically any
surface, including glass.
box of 12!
Color Item # PriceBlack 2906-0005 $4.95Red 2906-0006 $4.95
Yellow 2906-0007 $4.95
Pine Shims
Shims come in cartons of 120 and are 8”. 5207-0004 $9.95/box
GCT
Composite Shims
• Pre-scored for easy snapping• Greater load bearing than wood shims• Use on all shimming applications• Split resistant• Waterproof
5207-0003 $5.95/box32
GCT
49
MISC. EQuIPMENt
Fine tips are the perfect markers used to draw lines on stone for sink cut-outs and radius templating. Holds up to water during the cut. Remove with steel wool. Metal tip, quick drying, water resistant, smooth marking. Medium tips are for general stone identification marking.
Paint Markers
Wobble Wedges are used for leveling granite countertops. Ridged sides lock into place and prevent slipping.
Wobble Wedges
Fine White 5209-0001 $3.30Fine Red 5209-0002 $3.30
Med. White 5209-0003 $3.20Med. Red 5209-0004 $3.20
BOX 75 5207-0002 $11.90BOX 300 5207-0001 $39.50
3M Filter Mask No. 8210
General dust and sanding mask. Meets new NIOSH standards for non-toxic dusts and mists in well ventilated areas. This disposable mask is for temporary use. Sold in boxes of 20.
4507-0002 $17.50/Box
MISC. EQuIPMENt
50
The plated-steel frame provides ideal combination of strength and economy. The 2-ply soft-natural rubber blades yield performance superior to similar looking products. 14” wide.
Concrete Countertop Specialties Gear Bag
High Quality Construction
For all your tool
holding needs!
MSA Advantage 200 Respirator
Uses new patented Multiplex combination soft rubber and plastic that provides the most comfortable customized fit ever available on a small facial respirator. Uses NIOSH approved cartridges.
Grinder Gear Water Protectors for angle grinders
Grinder Gear is designed to protect the operator’s hand and grinder from water, cold and dust. By using Grinder Gear daily you will extend grinder life and enjoy increased productivity.
Klondike Safety GlassesThe Klondike® Series features safety and style at an affordable price to separate you from the pack. Klondike’s matte black frame finish, adjustable temples, 11 degree base curve lens and proprietary gel nose piece keeps you at the peak of comfort and style all day long.
Moldex Ear Plugs • Longer length for easy fitting and removal. • Bright green color for easy compliance checks. • Tapered for easy insertion in any size ear canal. • Non-irritating, smooth surface for added comfort. • NRR 32 rating• Corded or non-corded
Squeegee
Buffalo Steel toe BootsBuffalo Steel Toe Boots are made of high molecular weight PVC for high abrasive wear. They are net lined for easy on and off, have V-bar molded shanks and safety toes that meet or exceed ANSI.
Size Item # Price8 4501-0065 $20.009 4501-0066 $20.00
10 4501-0067 $20.0011 4501-0068 $20.0012 4501-0069 $20.0013 4501-0070 $20.0014 4501-0071 $24.50
5209-0008 H-14 Squeegee $8.50 5209-0009 Z-14 extra rubber blade $5.90/ea.
5209-0020 $34.95
Medium respirator 4507-0015 $15.00P-100 dust filters 2PK 4507-0004 $11.45GMA paint filters 2PK 4507-0014 $16.50
1918-0009 $21.00
Smoke 4504-0010 $3.95Clear 4504-0009 $3.95
Uncorded set 4503-0001 $.50prCorded set 4503-0006 $.90pr
• Click mechanism for easier use and dispensing.• Chute delivers plugs into the palm of your hand.• Affordable enough to be near every work area.• Eliminates the mess of individual paper/polybag packaging.• Each dispenser is sealed and disposable, plus completely recyclable.• Available in 250 per PlugStation®
with SparkPlugs® foam earplugs.• Mounting bracket with hardware included with every PlugStation.
4503-0008 $32.25
PlugStation® Earplug Dispenser
51
MISC. EQuIPMENt
Face Shield For full-face protection rely on Wilson visors to guard against light impacts, sparks, molten metal, and liquid splashes. Meets or exceeds ANSIZ87.1-1989 specs. Brow guard is constructed of tough, thermoplastic materials with a specially designed ledge to prevent liquids from splashing down the inside of the visor. Face shields are molded of durable, propionate and polycarbonate to resist impact; attaches easily to brow guard with positive locks and snap fasteners.
Once the concrete is placed and floated,allow to set, floating as needed, to bring Portland and air to the surface. Once the concrete has set to the point that it is firm to the touch you can begin using The Kipper Surface Finisher™ surface finisher being sure to start at a low RPM (50-100 RPM). As the concrete sets or firms up, continue with The Kipper Surface Finisher™ until you have reached the desired finish, not to exceed 1,200 RPM. Wait 15-20 minutes between uses depending again on the set time of the concrete.
*Set times vary depending on concrete, concrete slumps, and environment temperatures
the Kipper Surface Finisher™
Makita vR251DWDE 12v Cordless Concrete vibrator
Features: • Powerful 12V (2.6Ah) Ni-MH battery for powerful performance • Vibrates at 12,500 VPM for smooth mixing of concrete • Produces a consistent finish on concrete countertop footings and walls • Protective cover on switch and battery to prevent contamination • Increases strength of concrete• 46-7/8” flexible shaft
Standard Equipment: 2 Ea. Battery 1234 (193157-5) Charger DC1411 Battery cover (414938-7)
2” Faucet Knockoutfor concrete countertops
Tapered design enables easy release. Use silicone or a 2.5” screw to secure knockout to form. No release agent needed.
GCT
4504-0007 Headgear/Frame only $11.704510-0010 Faceshield lenses $5.75
3904-0052 $232.95
1001-0039 $477.14 7009-0002 $19.95
MISC. EQuIPMENt
52
Features and Benefits:• Allows undermount sinks to be placed before silicone starts to set up.• Eliminates the “rush” to get mounting hardware in position.• Most sinks can be installed by one person instead of two.• Works on kitchen and bathroom undermount sinks.• Rubberized to protect sink from being chipped or scratched.
• Easily undermounts any sink - including ovals and rounds• Use with solid surface or granite countertop materials• Eliminates the need for wood supports• Saves time, money and materials
• Fully adjustable and removable• 25”, 36”, and 50” lengths easily trim to fit any cabinet size• Use side to side or front to back• Hardware supplied for all installations (two undermounter packages are needed for ovals and rounds)
This tool allows you to install undermount sinks with ease. It will hold the sink in place so you can install the permanent mounting hardware. Perfect for using with our K-4 and K-6 undermount kits.
Sink undermounter Kits
undermount Sink Installation tool
5201-0023 $37.50/ea.
Size Weight per Set Item # Price25” 1.70 lbs. 5201-0007 $20.5036” 2.40 lbs. 5201-0008 $23.5050” 2.70 lbs. 5201-0009 $37.00
Professionally installs undermount sinks, from stainless steel to cast iron, under any countertop surface.
• No shimming• No drilling• No sawing
The front to back allowsinstallations from 14” to 26” The side to side allows
installations from 25” to 47”The offset side to side allows installations from 31” to 47”
Installs in minutes - saves money!Installs in minutes - saves money!
Sink Setter undermount Sink Installation Kits
5201-0076 $21.95
5201-0060 $32.95
5201-0059 $29.95
Front to Back Side to Side offset Side to Side
• No Gluing• No improvising!
Made in USA from 22 gauge galvanized steel Accommodates virtually any dishwasher Easy installation under any type of counter top Can be installed prior to or after counter top installation Dishwasher does not have to be present at jobsite Won’t damage expensive cabinetry.Eliminates return trip by counter top installer to anchor dishwasher Saves time AND money!
Diamond Grip II and tSN Installation tool
Lever action tool provides maximum setting power with minimum effort. Operating instructions included.
Drill 1/4” hole and insert your mounting nuts for easy setting!
No messing with glues
Description Item # PriceDiamond Grip II Tool 5201-0017 $96.00
Sink Mounting Nut Inserts 8/32” - 25 pk 5201-0052 $10.79
Diamond Grip II TSN Conversion Kit 5201-0022 $39.00
Granite Grabbers™
5201-0065 $4.95 ea. 5201-0075 $4.95 Set
Simple. Lasting. Secure.™A Revolutionary Solution for Quickly and Securely Installing Dishwashers Under Granite or Other Solid-Surface Countertops. Works on all Solid Surface Countertops!
AnchorsClips Dishwasher
Clips
ScrewsSinkStuds
DishwasherClips
Dimension: 3/8” dia. x 9/16” longThread: 10-24
Size: 10-24 x 1/2”
100 Pack 5201-0056 $52.00
100 Pack 5201-0074 $9.991 Pack 5201-0057 $.65
100 Pack 5201-0070 $30.00
50 Pack 5201-0071 $40.00 100 Pack 5201-0073 $3.8950 Pack 5201-0072 $35.00
53
MISC. EQuIPMENt
tERMS & CoNDItIoNS
PAYMENT TERMS • ALL PAYMENTS IN U.S. FUNDS ONLY• All invoices are due upon receipt unless stated definitely• Outstanding Invoice 30 days or older will be charged 1.5% interest monthly. • Granite City Tool accepts Visa, MasterCard, American Express, and Discover credit cards. • Orders on account with a past due balance will be shipped only with Credit Card payment. • A $30.00 Fee will be charged to all NSF Checks.
ORDERING • Orders can be placed over the phone, by fax, by mail, or online at concretecountertopspecialties.com.• There is a $15.00 minimum order required on All ORDERS or an additional $10.00 handling fee will be applied.
SHIPPING • Unless a preference is indicated by the customer, GCT will ship ‘best way’. • If GCT is unable to fill an entire order, partial shipment will be made, unless “Ship Complete” is indicated on order.
FREIGHT • Inspect shipment immediately. Damages or shortages must be reported to the carrier at once, and noted damage on Bill of Lading. • If package arrives damaged, notify carrier immediately. Save all packing and cartons for the carrier to inspect. • GCT must be notified of any shortages within 24 Hours of Receipt. • Freight is FOB St. Cloud, MN unless drop-shipped from the manufacturer.• Additional charges may apply to a factory direct shipment. • All orders to be shipped NEXT DAY must be received by 1:00 pm Central Standard Time (CST). • Normal delivery service anywhere in the continental USA is 1-7 business days guaranteed by the Carrier. • INTERNATIONAL ORDERS: Granite City Tool welcomes orders from all over the world. Freight Charges are dependent upon
weight and dimension of package. A minimum order $100.00 (US funds) is required. The Virgin Islands, Puerto Rico, and other countries will be charged the current international Air Express shipping rate. All duty is paid by the customer.
• Shipments outside the Continental U.S., please call for details. • Fed Ex is available to Alaska and Hawaii. Please call for details.
PRICE CHANGES • Prices and availability are subject to change without notice. • Quoted prices are good for 10 days. • Granite City Tool reserves the right to correct pricing errors on any or all print or any electronic media. • Granite City Tool reserves the right to limit quantities.
RETURNS • 30 Day Return Policy for most unused items. Special Orders or customized products cannot be returned. Additional restocking fees may apply.• All returns need a Return Merchandise Authorization Number (RMA#) from Granite City Tool. To receive an RMA#,
contact a sales person by calling 800-328-7094 or e-mail [email protected]. • Returned items must be unused, missing no parts, and be in a resalable condition to receive full credit.
If you prefer a refund, payment will be in the same form as original payment. • Items eligible to be returned must be postmarked within 30 days of invoiced date or 45 days from shipping. Items returned after
the above set time period, or in non-resalable condition, including marked or damaged manufacturer original packaging, will not be credited. These packages need to be kept in new and resalable condition.
• Once you have received a RMA number, write the RMA number on the packing slip and label. Then ship the item to: Granite City Tool Attn: Returns RMA #__________ 247 28th Ave S Waite Park, MN 56387 • Items returned without a RMA # will be subject to a restocking fee of 20% of the sale price.• Return of non-stock items will be subject to manufacturer’s restocking fee. • NO RETURNS ON PRINTED MATERIALS, VIDEOS, DVDs, OR SOFTWARE.• Replacement items will be billed to customer account until credit is issued when the item is received by Granite City Tool.• Please note that we will refund shipping costs only if the return is a result of our error.
COMMUNICATION • PHONE NUMBER: 1-866-902-7311 OR 320-257-7311 • FAX NUMBER (24 HOURS): 866-522-1817• EMAIL: [email protected]• WEBSITE: concretecountertopspecialties.com
HOURS • C.C.S. / Granite City Tool is open for phone orders: Monday thru Friday 7:00 am to 6:00pm Central Std Time Saturday 8:00 am to 12:00 pm from April 1st thru Nov. 22nd• Closed New Years Day, Memorial Day, July 4th, Labor Day, Thanksgiving, Christmas Day
WARRANTY • All warranty claim are subject to approval for credit by the manufacturer. • Shipping costs are subject to manufacturer’s policy.
FAX oRDER SHEEt
55
BILL TO: SHIP TO: Customer Phone # E-Mail Customer Fax # Contact Via Customer PO Salesman Credit Card #
EXP V-Code Terms
Item # Quantity Description Unit Price Total
Total
Prices and terms are subject to approval and acceptance by St. Cloud office. All terms to be cash unless credit arrangements made. Invoices due payable 30 days from date issued. Buyer agrees to pay all collection charges and reasonable attorney fees where required to secure payment of account.
PurchaserBy
CUST ID MAIL: 247 28th Ave. Waite Park, MN 56387Sales Order # FAX: 866-522-1817Date 20
CREDIt APPLICAtIoN
247 28TH AVENUE SOUTH WAITE PARK, MN 56387 PH: (320) 251-8600 866-902-7311 FAX: (866) 522-1817
Full Company Name: ___________________________________________________________________
Address: _____________________________________________________________________________
City: _________________________________________ State: _______________ Zip: _________________
Business Phone: ________________________________ Fax: ____________________________
Company Tax Id or Owner Social Security Number: __________________________________________
Full Name of Company Manager or Owner: _________________________________________________
Ship to Address: _____________________________________________________________
City: ________________________ State: _______ Zip: ___________ Home Phone: _________________
Type of Business: __________________________________________________________ Length of Time Doing Business at this Address: ___________________________________ Length of Time in Business: __________________________________________________
Trade References: (Be sure to INCLUDE FAX #)
Name _______________________________________ Name_________________________________________ Address _____________________________________ Address________________________________________ City, State, Zip _______________________________ City, State, Zip___________________________________ Phone # _____________________________________ Phone _________________________________________ Fax# _______________________________________ Fax# __________________________________________
Name _______________________________________ Name _________________________________________ Address _____________________________________ Address________________________________________ City, State, Zip _______________________________ City, State, Zip___________________________________ Phone # _____________________________________ Phone _________________________________________ Fax# _______________________________________ Fax# __________________________________________
Name of Bank ______________________________________________________________ Address __________________________________________________________________ Checking _________________________________________________________________ Address __________________________________________________________________ Loans ____________________________________________________________________ Address __________________________________________________________________
I/we hereby authorize Granite City Tool Company or its representatives to contact the above listed persons or businesses for the purpose of determining my credit rating, and such other financial information, which such firms may have with respect to my company that will be useful in determining my credit worthiness.
For consideration of the extension of credit to the firm named, herein, I/we promise to pay to the order of Granite City Tool Company Inc, 247 28th Avenue South, Waite Park, Minnesota all charges to the account of the firm shown herein with in 30 days of invoice date. A finance charge of 1-1/2% per month, which is an annual percentage rate of 18% will be due on all accounts more that 30 days old. There is a $30.00 service charge on all returned checks.
I/we further agree that if payment of said account is not made on or before the due date(s) and the account is placed in the hands of an attorney for collection or suit is brought on the same, or same is collected through probate or bankruptcy proceedings, an additional 40% of the outstanding debt shall be added to the balance as collection costs.
Signature ______________________________________ Date ______________________ Title _________________________________________
I/we agree that in the event the said account should default on payment of account I will be personally responsible for payment of same in accordance with above terms.
Signature(s) ____________________________________ Date ______________________
FAX oRDER SHEEt
57
BILL TO: SHIP TO: Customer Phone # E-Mail Customer Fax # Contact Via Customer PO Salesman Credit Card #
EXP V-Code Terms
Item # Quantity Description Unit Price Total
Total
Prices and terms are subject to approval and acceptance by St. Cloud office. All terms to be cash unless credit arrangements made. Invoices due payable 30 days from date issued. Buyer agrees to pay all collection charges and reasonable attorney fees where required to secure payment of account.
PurchaserBy
CUST ID MAIL: 247 28th Ave. Waite Park, MN 56387Sales Order # FAX: 866-522-1817Date 20
Fax or Mail Application to:
Concrete CountertopSpecialties
Phone: (866) 902-7311 Fax: (866) 522-1817
247 28th Ave S [email protected] Waite Park, MN 56387 www.concretecountertopspecialties.com
Lessee Company Information
Company Name ________________________________________________________________________________________________________________
Company Address ______________________________________________________________________________________________________________
E-mail _________________________________________________________________________________________________________________________ Phone ( ________ )_________________________________________________ Fax ( ________ ) _________________________________________________
Signer _________________________________________________________________________________________________________________________
Title ___________________________________________________________________________________________________________________________
State Corp. Filing # ______________________________________________________________________________________________________________
Type of Business: Non-Pro�t Partnership Proprietorship Corporation
Number of Years in Business ______________________________________ Annual Sales _________________________________________________
Personal Information on O�cers, Partners, or Guarantors
Name _________________________________________________________________________ Title ___________________________________________
SSN _____________________________________________ % Ownership ____________________ Phone ( _______ ) __________________________
Home Address __________________________________________________________________________________________________________________
Name _________________________________________________________________________ Title ___________________________________________
SSN _____________________________________________ % Ownership ____________________ Phone ( ________ ) _________________________
Home Address __________________________________________________________________________________________________________________
Lease Term
Term _________________________________________________________________ Monthly Payment: $ _____________________________________
Advance Payments: 1 2 3 Other Purchase Option: FMV $1 10% Other
Vendor Information
Vendor Name _________________________________________ Contact ____________________________________________________________
Phone ( ______ ) __________________________ E-mail _______________________________________________________________________________
Equipment Information
Address (if di�erent from Company address) _____________________________________________________________________________
Equipment Description ___________________________________________________________ Equipment Cost ______________________________
Applicant _____________________________________________________________ Signature ______________________________________________
Title __________________________________________________________________ Date ___________________________________________________
Applicant _____________________________________________________________ Signature ______________________________________________
Title __________________________________________________________________ Date ___________________________________________________
Lease Application