Embed Size (px)
Citation preview
Conference Agenda
28th International Conference on Flexible Automation and Intelligent Manufacturing
Date: Sunday, 10/Jun/2018
3:00pm - 6:00pm Registration
Foyer
6:00pm - 8:00pm Welcome Reception
Seneca Room
Date: Monday, 11/Jun/2018
8:00am - 5:30pm Registration: Registration of participants
Foyer
8:30am - 9:10am Opening: Opening Session Session Chair: Mohammad Munir Ahmad Session Chair: Dusan Sormaz Westin Grand
Ballroom
9:10am - 10:00am Mon-09.10-Gb: Keynote 1: Large scale 3D printing – past, present and future prospectsSession Chair: Dusan Sormaz Speaker: Behrokh Khoshnevis, Contour Crafting, University of Southern California Westin Grand
Ballroom
Large scale 3D printing – past, present and future prospects Behrokh Khoshnevis Contour Crafting Corporation (CC Corp)
10:00am - 10:50am Mon-10.00-Gb: Keynote 2: A Supply Chain Model for Additive Manufacturing: AMedical Case component Session Chair: F. Frank Chen Speaker: Richard A. Wysk, North Carolina State University, US
Westin Grand Ballroom
A Supply Chain Model for Additive Manufacturing: A Medical Case component Richard A. Wysk North Carolina State University, Raleigh, NC
10:50am - 11:20am Coffee break
11:20am - 12:40pm Mon-11.20-Ch: Design and Manufacturing of Personilized Products and Services 1 Session Chair: Roland Stolt Session Chair: Ardian QorriChittenden Room
11:20am - 11:40am
A new approach to predict the flexibility and precision of manufacturing systems using geometric constraints and small displacement torsors Hana Amin Khan1, Sajid Ullah Butt2, Aamer Ahmed Baqai2, Hasan Aftab Saeed2 1Electrical Engineering Department, Foundation University, Islamabad Pakistan; 2National University of Sciences and Technology (NUST), Islamabad, Pakistan
11:40am - 12:00pm
Comparison of Visual Performance with Operational Fatigue Level based on Eye Tracking Model Seng Fat Wong, Yufang Cong University of Macau, Macau S.A.R. (China)
12:00pm - 12:20pm
Introducing Tool Inserts for Die Casting Manufactured by Selective Laser Sintering Roland Stolt, Samuel André, Fredrik Elgh Jonkoping University, Sweden, Sweden
12:20pm - 12:40pm
Green Supply Chain Management Practices and Company Performance: A Meta-analysis approach Ardian Qorri1, Zlatan Mujkić1, Saranda Gashi2, Andrzej Kraslawski1,3 1School of Business and Management - Industrial Engineering and Management, Lappeenranta University of Technology, Finland; 2Facoltà di Economia "Giorgio Fuà" - Università Politecnica delle Marche, Italy; 3Faculty of Process and Environmental Engineering, Technical University of Lodz, Poland
11:20am - 12:40pm Mon-11.20-Ga: Enterprise Knowledge Management Session Chair: Milton Borsato Session Chair: Zoran Draskovic Great Southern
Gallery
11:20am - 11:40am
Risk Management Analysis in Product Development - Bibliometric and systemic analysis to identify research opportunities Gustavo Bastchen1, Fernanda Silva2, Milton Borsato3 1UTFPR, Brazil; 2UTFPR, Brazil; 3UTFPR, Brazil
11:40am - 12:00pm
Guideline to aid Project Managers in Conceptualising and Implementing Risk Management in Building Projects Nengi Odimabo, Chike F Oduoza University of Wolverhampton, United Kingdom
12:00pm - 12:20pm
Comparative Analysis of Knowledge Management Activities in SMEs: Empirical Study from a Developing Country Zorica Uzelac1, Djordje Celic1, Viktorija Petrov2, Zoran Draskovic1, Dalibor Beric1 1Faculty of Technical Sciences, University of Novi Sad, Serbia; 2Faculty of Economics, University of Novi Sad, Serbia
11:20am - 12:40pm Mon-11.20-Ne: Lean and Agile Manufacturing 1 Session Chair: Chike F Oduoza Session Chair: Rebekka BüttnerNeil Room
11:20am - 11:40am
Influence of Lean Practice on Performance of Manufacturing SMEs in Kurdistan Region of Iraq (KRI) Ibrahim Salih Mohammad, Chike F Oduoza University of Wolverhampton, United Kingdom
11:40am - 12:00pm
Cloud Kanban Framework for Service Operations Krishnan Krishnaiyer, F. Frank Chen, Hamed Bouzary The University of Texas at San Antonio, United States of America
12:00pm - 12:20pm
Changeability of manufacturing companies in the context of digitalization Rebekka Büttner1, Egon Müller2 1BMW Group, Germany; 2Chemnitz University of Technology, Germany
12:20pm - 12:40pm
Agile Integrated Facilities Maintenance Approach to Apparel Sector Wathsala Chamini Thenuwara, Y. G. Sandanayake Department of Building Economics, University of Moratuwa, Sri Lanka
11:20am - 12:40pm Mon-11.20-Pa: Modelling and Simulation of Manufacturing and Services 1 Session Chair: Pawel Pawlewski Session Chair: Mandvi MalikPark Room
11:20am - 11:40am
Logistics maturity model for service company – theoretical background Karolina Werner-Lewandowska, Monika Kosacka-Olejnik, Marek Fertsch Poznan University of Technology, Poland
11:40am - 12:00pm
Planning and optimising petroleum supply chain Sameh M Saad, Elganidi H Elsaghier, David Ezaga Sheffield Hallam University, United Kingdom
12:00pm - 12:20pm
Using PFEP for simulation modeling of production systems Pawel Pawlewski Poznan University of Technology, Poland
12:20pm - 12:40pm
Data-driven Simulation Modelling for Progressive Care Units in Hospitals Dusan Sormaz, Mandvi Malik Ohio University, United States of America
11:20am - 12:40pm Mon-11.20-Th: Smart Factories and Internet of Things Session Chair: Sang Won Yoon Session Chair: Marco MaggipintoThurber Room
11:20am - 11:40am
Industry_Integrator as retrofit solution for digital manufacturing methods in existing industrial plants Dennis Cüneyt Bakir, Robin Bakir, Engels Florian Innovator_Institut, Germany
11:40am - 12:00pm
Industrie 4.0 in production ramp-up management Uwe Dombrowski, Jonas Wullbrandt, Philipp Krenkel Technische Universität Braunschweig, Germany
12:00pm - 12:20pm
A Distributed Adaptive Coordination Protocol to Enhance Manual Order Picking Operations Husam R. Dauod, Ibrahim Yilmaz, Sang Won Yoon Binghamton University, United States of America
12:20pm - 12:40pm
A Dynamic Sampling Approach for Cost Reduction in Semiconductor Manufacturing Gian Antonio Susto1, Marco Maggipinto1, Federico Zocco2, Sean McLoone2 1University of Padova, Italy; 2Queen's University Belfast, United Kingdom
12:40pm - 1:40pm Lunch break
1:40pm - 3:40pm Mon-13.40-Ch: Additive, Subtractive and Hybrid Manufacturing 1 Session Chair: Mika Lohtander Session Chair: Andi DineChittenden Room
1:40pm - 2:00pm
On the development of a robotic 3D printing system Andi Dine, George-Christopher Vosniakos National Technical University of Athens, Greece
2:00pm - 2:20pm
Fabrication of surfaces with reduced friction using nanosecond pulse laser Jarno, Jere, Juhani Kaakkunen, Jonna Tiainen, Ahti Jaatinen-Värri, Aki Grönman, Mika Lohtander Lappeenranta University of Technology, Finland
2:20pm - 2:40pm
G-code Visualization and Editing Program for Inexpensive Metal 3D Printing Trung Huy Duong, Nebojsa I. Jaksic, Jude L. DePalma, Bahaa Ansaf, D Michael Daniel, James Armijo, Miguel Galaviz Colorado State University-Pueblo, United States of America
2:40pm - 3:00pm
Topology optimization of 2.5D parts using the SIMP method with a variable thickness approach Volkan Kandemir1, Oguz Dogan2, Ulas Yaman3 1ROKETSAN, Turkey; 2ASELSAN, Turkey; 3Middle East Technical University, Turkey
3:00pm - 3:20pm
Comprehensive Analysis of the Shrinkage Compensation Approach Proposed for the FDM process Mecid Ugur Dilberoglu1, Seyda Simsek2, Ulas Yaman1 1Middle East Technical University, Turkey; 2ASELSAN, Turkey
3:20pm - 3:40pm
Characterization of resistors created by fused filament fabrication using electrically-conductive filament Nebojsa Ilija Jaksic1, Pratik Dilip Desai2 1Colorado State University - Pueblo, United States of America; 2Rice Lake Weighing Systems, United States of America
1:40pm - 3:40pm Mon-13.40-Ga: Workshop: Intelligent Planning, Part 1 Session Chair: Dusan Sormaz Additional fee, only for workshop ticket holders. Great Southern
Gallery
Tools and Applications of Intelligent Manufacturing Planning, Part 1 Dusan Sormaz Ohio University, United States of America
1:40pm - 3:40pm Mon-13.40-Ne: Cellular Manufacturing Design and Control Session Chair: Ilkay Saracoglu Session Chair: Azadeh SadeghiNeil Room
1:40pm - 2:00pm
Product Development, Digital Manufacturing and Product Manufacturing Information: A Bibliometric and Systemic Analysis Roberto Shigueru Sato, Milton Borsato, Jaqueline Sebastiany Iaksch, Ederson Carvalhar Fernandes, Kaio Vasconcelos Oliveira UTFPR-Federal University of Technology - Parana (UTFPR)
2:00pm - 2:20pm
A Petri Net Model for Scalable Systems Syed Maaz Hasan, Sajid Ullah Butt, Aamer Ahmed Baqai College of Electrical and Mechanical Engineering, National University of Science and Technology, Islamabad, Pakistan, Pakistan
2:20pm - 2:40pm
Framework for Part Family Formation based on setup similarity coefficient Ijlal Ahmed Institute of Space Technology, Islamabad, Pakistan
2:40pm - 3:00pm
Scheduling and sequencing of products in the batch-cyclic method Najat Eid Al masarwah1, Gursel Suer2 1Ohio University, USA; 2Ohio University, USA
3:00pm - 3:20pm
Multi-Objective Fuzzy Flow Shop Scheduling Model in a Manufacturing Company Ilkay Saracoglu1, Gursel A. Suer2
1Department of Industrial Engineering, Istanbul Gelisim University, Avcilar, 34215, Istanbul, Turkey; 2Department of Industrial and Systems Engineering, Ohio University, Athens, OH, 45701
3:20pm - 3:40pm
Bi-objective Fuzzy Mathematical Models in a Labor-Intensive Cell Azadeh Sadeghi, Roohollah Younes Sinaki, Gursel Suer Ohio university, United States of America
1:40pm - 3:40pm Mon-13.40-Pa: Production Planning, Scheduling and Control Session Chair: Kyung-Hee Park Session Chair: Robert OjstersekPark Room
1:40pm - 2:00pm
Improved Heuristic Kalman Algorithm for Solving Multi-Objective Flexible Job Shop Scheduling Problem Robert Ojstersek1, Hankun Zhang2, Liu Shifeng2, Borut Buchmeister1 1University of Maribor, Slovenia; 2Beijing Jiaotong University, China
2:00pm - 2:20pm
Solving Robust Resource Constrained Scheduling Problem by Multi-objective Optimization Method based on Hybridization of EDA and GA Xinchang Hao1, Lu Sun2, Mitsuo Gen3 1Changzhou Institute of Technology, Changzhou, China; 2School of Software, Dalian University of Technology, Dalian, China; 3Fuzzy Logic Systems Institute and Tokyo University of Science, Tokyo, Japan
2:20pm - 2:40pm
An approach for improvement in local benchmarking of manufacturing lines by correlation of planning parameters Syed Maaz Hasan, Muhammad Faisal Rana, Sajid Ullah Butt, Aamer Ahmad Baqai College of Electrical and Mechanical Engineering, National University of Science and Technology, Islamabad, Pakistan, Pakistan
2:40pm - 3:00pm
Evaluation of the influence of Human Personalities in Multi-objective Decision Making using An Island-based Genetic Algorithm Gursel Suer, Arkopaul Sarkar Ohio University, United States of America
1:40pm - 3:40pm Mon-13.40-Th: Sustainable Manufacturing and Engineering 1 Session Chair: Carlos Rodrigues Rocha Session Chair: Usama AwanThurber Room
1:40pm - 2:00pm
Understanding influential factors on implementing Social Sustainability Practices in Manufacturing Firms: An interpretive structural modelling (ISM) analysis Usama Awan, Andrzej Kraslawski, Janne Huiskonen LUT School of Business and Management, Lappeenranta University of Technology Lappeenranta, Finland
2:00pm - 2:20pm
Analysis and ranking of drivers for eco-design implementation in the Finnish pulp and paper industry Shqipe Buzuku1, Javier Farfan1, Tuomo Kässi1, Andrzej Kraslawski1,2 1Lappeenranta University of Technology, Finland; 2Lodz University of Technology, Łódź, Poland
2:20pm - 2:40pm
Multi-commodity multimodal splitable supply chain network design for smart manufacturing via logistics hubs
Behnam Karimi, Mahdi Bashiri Shahed university, Iran, Islamic Republic of
2:40pm - 3:00pm
Research on Edges Immunization Strategy for Complex Network Based on SIS-CA Model Guanglin Wu, Chong Peng Beihang University, China, People's Republic of
3:00pm - 3:20pm
A novel method for analysis and optimization of electric energy consumption in manufacturing processes Gislene Sailm Rodrigues1,2, João Carlos Espíndola Ferreira1, Carlos Rodrigues Rocha2 1Federal University of Santa Catarina; 2Federal Institute of Education, Science and Technology of Rio Grande do Sul, Brazil
3:20pm - 3:40pm
Role of positional assembly accuracy in press forming of paperboard Panu Tanninen, Sami Matthews, Antti Pesonen, Ville Leminen, Harri Eskelinen, Juha Varis Lappeenranta University of Technology, Finland
3:40pm - 4:10pm Coffee break
4:10pm - 5:30pm Mon-16.10-Ch: Collaborative Robotics in Smart Manufacturing 1 Session Chair: Marcello Pellicciari Session Chair: Ahlem AssilaChittenden Room
4:10pm - 4:30pm
A mixed-reality digital set-up to support design for serviceability Margherita Peruzzini1, Fabio Grandi1, Marcello Pellicciari1, Claudia Elisabetta Campanella2 1University of Modena and Reggio Emilia, Italy; 2CNH Industrial, Italy
4:30pm - 4:50pm
TECHNOLOGICAL AND ECONOMIC EVALUATION OF CONVERSION OF POTENTIAL FLARE GAS TO ELECTRICITY IN NIGERIA. Emeka Nnanna Ojijiagwo1, Chike F Oduoza2, Nwabueze Emekwuru3 1University of Wolverhampton, United Kingdom; 2University of Wolverhampton, United Kingdom; 3Coventry University, United Kingdom
4:50pm - 5:10pm
Impact of sustainability on the supply chain 4.0 performance Paul-Eric Dossou Icam, France
5:10pm - 5:30pm
Towards improving the future of manufacturing through digital twin and augmented reality technologies Souad Rabah2, Ahlem Assila1, Elio Khouri3, Florian Maier2,4, Fakhreddine Ababsa3, Valery Bourny2,5, Paul Maier4, Frédéric Mérienne3 1CESI, LINEACT, Reims, France; 2ESIEE-Amiens, France; 3Image Institue Ensam OarisTech school, France, France; 4EREM Company, France; 5UPJV, Laboratory of Innovative Technologies, Amiens, France
4:10pm - 5:30pm Mon-16.10-Ga: Workshop: Intelligent Planning, Part 2 Session Chair: Dusan Sormaz Additional fee, only for workshop ticket holders. Great Southern
Gallery
Tools and Applications of Intelligent Manufacturing Planning, Part 2
Dusan Sormaz Ohio University, United States of America
4:10pm - 5:30pm Mon-16.10-Ne: Big Data Analytics in Manufacturing Systems Session Chair: Lihui Wang Session Chair: Syed Maaz HasanNeil Room
4:10pm - 4:30pm
Predictive Maintenance of Machine Tool Linear Axes: A Case from Manufacturing Industry Bernard Schmidt1, Lihui Wang2,1 1University of Skövde, Sweden; 2Royal Institute of Technology, Sweden
4:30pm - 4:50pm
A Convolutional Autoencoder Approach for Feature Extraction in Virtual Metrology Marco Maggipinto, Chiara Masiero, Alessandro Beghi, Gian Antonio Susto University of Padova, Italy
4:50pm - 5:10pm
Reconciling the Bill of Materials to the Bill of Process for Configured Assemblies David Sly Proplanner, United States of America
4:10pm - 5:30pm Mon-16.10-Pa: Modelling and Simulation of Manufacturing and Services 2 Session Chair: Nebojsa Ilija Jaksic Session Chair: Muhammad AwaisPark Room
4:10pm - 4:30pm
Evaluation of procurement scenarios in one-dimensional cutting stock problem with a random demand mix Huseyin Sarper1, Nebojsa Ilija Jaksic2 1Old Dominion University, United States of America; 2Colorado State University - Pueblo, United States of America
4:30pm - 4:50pm
A computational and experimental analysis of crease behavior in press forming process Muhammad Awais1, Panu Tanninen1, Teemu Leppänen2, Sami Matthews1, Juha Varis1, Kaj Backfolk1 1Lappeenranta University of Technology, School of Energy Systems, P.O. Box 20, Lappeenranta FI-53851, Finland; 2LUT Savo Sustainable Technologies, Lappeenranta University of Technology, Varkaus unit, Opiskelijankatu 3, Varkaus FI-78210, Finland
4:50pm - 5:10pm
Assessment Methodology for Competitive Manufacturing Mohammad Munir Ahmad Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan, Pakistan, Pakistan
5:10pm - 5:30pm
Towards a hybrid multi-dimensional simulation approach for performance assessment of MTO and ETO manufacturing environments Cátia Sofia Rodrigues Barbosa1,2, Américo Azevedo1,2 1Inesc Tec, Porto, Portugal; 2Faculty of Engineering, University of Porto, Porto, Portugal
4:10pm - 5:30pm Mon-16.10-Th: Sustainable Manufacturing and Engineering 2 Session Chair: Yasangika Gayani Sandanayake Session Chair: Monika Kosacka-OlejnikThurber Room
4:10pm - 4:30pm
Role of moisture on press formed products made of Wood Plastic Composites Sami Matthews, Amir Toghyani, Sami-Seppo Ovaska, Marko Hyvärinen, Panu Tanninen, Ville Leminen, Antti Pesonen, Harri Eskelinen, Juha Varis, Timo Kärki Lappeenranta University of Technology, Finland
4:30pm - 4:50pm
Consumer Choice and Sustainable Development of Supply Chains Zlatan Mujkic1, Ardian Qorri1, Andrzej Kraslawski1,2 1Lappeenranta University of Technology, Finland; 2Technical University of Lodz, Poland
4:50pm - 5:10pm
Facilities Management Supply Chain: Functions, Flows and Relationships Nishara Abdeen, Y. G. Sandanayake Department of Building Economics, University of Moratuwa, Sri Lanka
5:10pm - 5:30pm
How to determine reverse logistics process maturity profile: method proposal Monika Kosacka - Olejnik, Karolina Werner -Lewandowska Poznan Univeristy of Technology, Poland
6:00pm - 9:00pm Dinner
Westin Grand Ballroom
Date: Tuesday, 12/Jun/2018
8:00am - 8:30am Registration
Foyer
8:30am - 9:50am Tue-08.30-Ch: Engineering and Manufacturing Methods and Tools for Industry 4.0, 2 Session Chair: David Sly Session Chair: Pierre Eric Christian JohanssonChittenden Room
8:30am - 8:50am
A digital twin for a micro manufacturing unit Mika Lohtander1, Elodie Garcia1, Minna Lanz2, Jarno Kaakkunen1, Jarno Volotinen1, Juho Ratava1 1Lappeenranta University of Technology, Finland; 2Tampere University of Technology, Finland
8:50am - 9:10am
Spatial Augmented Reality: an application for human work in smart manufacturing environment Maura Mengoni, Silvia Ceccacci, Andrea Generosi, Alma Leopardi Università Politecnica delle Marche, Italy
9:10am - 9:30am
Internet Based eKanban/eKitting involving suppliers David Sly Proplanner, United States of America
9:30am - 9:50am
Enhancing Future Assembly Information Systems – Putting Theory into Practice Pierre Eric Christian Johansson1,2, Lennart Malmsköld3, Åsa Fast-Berglund2, Lena Moestam1 1Volvo Group Trucks Operations; 2Chalmers University of Technology; 3University West
8:30am - 9:50am Tue-08.30-Ga: Manufacturing Processes and Technology Session Chair: Peter John Tiernan Session Chair: Teresa Pereira Great Southern
Gallery
8:30am - 8:50am
Improving an APEX machine involved in tires manufacturing process Rui F. L. Santos, Francisco J. G. Silva, Ronny M. Gouveia, Raul D. S. G. Campilho, Maria Teresa R. Pereira, Luís C. P. Ferreira ISEP - School of Engineering, Polytechnic of Porto, Portugal
8:50am - 9:10am
Development of Low-Cost High Temperature Testing Device Peter John Tiernan, Gerard O'Connor University of Limerick, Ireland
9:10am - 9:30am
Interfacial Polymerization: A Facile Technique for Developing Solvent Resistant Nanofiltration (SRNF) Membrane Fozia Tabasum Minhas1,2, Muhammad Iqbal Bhanger3 1Department of Chemistry, Khwaja Fareed University of Engineering and Information Technology (KFUEIT), 64200, Rahim Yar Khan; 2School of Chemical and Materials Engineering (SCME), National University of Sciences and Technology, H-12,44000, Islamabad, Pakistan; 3HEJ Research Institute of Chemistry, University of Karachi, Karachi-75270, Pakistan
9:30am - 9:50am
A codification system roadmap: case study in a metalworking company Carlos Lemos, Maria Teresa R. Pereira, Luís Pinto Ferreira, Francisco J. G. Silva ISEP - School of Engineering, Polytechnic of Porto, Portugal
8:30am - 9:50am Tue-08.30-Ne: Lean and Agile Manufacturing 2 Session Chair: Francisco J. G. Silva Session Chair: Ronny Miguel GouveiaNeil Room
8:30am - 8:50am
Implementing lean tools in the manufacturing process of small textile products Patrícia Neves1, Francisco J. G. Silva1, Ana Gouveia2, Luís Pinto Ferreira1, Carina Pimentel3 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2MCS Textile Solutions, Lda.; 3GOVCOOP, DEGEIT, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
8:50am - 9:10am
Establishing standard methodology to improve the production rate of assembly lines used for low added-value products Conceição Rosa, Francisco J. G. Silva, Luís Pinto Ferreira, Maria Teresa Pereira, Ronny Miguel Gouveia ISEP - School of Engineering, Polytechnic of Porto, Portugal
9:10am - 9:30am
Improvement of the Statistical Process Control Certainty in an Automotive Manufacturing Unit Radu Godina1, Carina Pimentel2, Francisco J. G. Silva3, João C. O. Matias1,2 1C-MAST, University of Beira Interior, Portugal; 2GOVCOPP, DEGEIT, University of Aveiro, Portugal; 3ISEP - School of Engineering, Polytechnic of Porto
9:30am - 9:50am
Development of hydraulic clamping tools for the machining of complex shape mechanical components Cláudio Costa, Francisco J. G. Silva, Ronny M. Gouveia, Rui P. Martinho ISEP - School of Engineering, Polytechnic of Porto, Portugal
8:30am - 9:50am Tue-08.30-Pa: Manufacturing Systems Design and Analysis 1 Session Chair: Paul Heisler Park Room
8:30am - 8:50am
The way to a simple and environment-friendly production design of complex foam parts – innovative solutions for the polyurethane manufacturing industry Paul Heisler, Sascha Dominik Gick, Joerg Franke Friedrich-Alexander-University of Erlangen-Nuremberg, Germany
8:50am - 9:10am
Experimental and numerical analysis of scarf aluminium adhesive joints Daniel F. O. Silva1, Raul D. S. G. Campilho1,2, Francisco J. G. Silva1, Ulisses T. F. Carvalho1 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2INEGI - Polo FEUP, Porto, Portugal
9:10am - 9:30am
Development of a numerical methodology for strength prediction of weld-bonded joints Fernando J. S. Almeida1, Raul D. S. G. Campilho1,2, Francisco J. G. Silva1, Gustavo P. Marques1 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2INEGI - Polo FEUP, Porto, Portugal
9:30am - 9:50am
Comparison of different adhesively-bonded joint configurations for mechanical structures Nelson G. C. Barbosa1, Raul D. S. G. Campilho1,2, Francisco J. G. Silva1, Raul D. F. Moreira1 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2INEGI - Polo FEUP, Porto, Portugal
8:30am - 9:50am
Thurber Room Tue-08.30-Th: Sustainable Manufacturing and Engineering 3 Session Chair: Fazleena Badurdeen Session Chair: Paul-Eric Dossou
8:30am - 8:50am
Combined effect of blank holding force and forming force on the quality of press-formed paperboard trays Ville Leminen, Sami Matthews, Antti Pesonen, Panu Tanninen, Juha Varis Lappeenranta University of Technology, Finland
8:50am - 9:10am
Sustainable Logistics and mobility in cities: the example of Paris South-East Area Charles-Henri Sullet, Paul-Eric Dossou Icam, France
9:10am - 9:30am
Towards Developing Sustainable Reconfigurable Manufacturing Systems Aihua Huang, Fazleena Badurdeen, I.S. Jawahir Institute for Sustainable Manufacturing, Department of Mechanical Engineering, UNIVERSITY OF KENTUCKY, United States of America
9:30am - 9:50am
Designing a novel feeding system for CNC turning machines Gabriel B. Silva, Francisco J. G. Silva, Raul D. S. G. Campilho, Ronny M. Gouveia ISEP - School of Engineering, Polytechnic of Porto, Portugal
10:00am - 10:50am Tue-10.00-Gb: Keynote 3: Robotics as Assistive Technology for Humans: Design ofRobot as Tool for Treatment of Children with Developmental Disorders Session Chair: Dusan Sormaz Speaker: Branislav Borovac, University of Novi Sad, Serbia
Westin Grand Ballroom
Robotics as Assistive Technology for Humans: Design of Robot as Tool for Treatment of Children with Developmental Disorders Branisalv Borovac University of Novi Sad
10:50am - 11:20am Coffee break
11:20am - 12:40pm Tue-11.20-Gb: Panel: Emerging Methods for Advanced Manufacturing Systems Session Chair: Gursel Suer Session Chair: Dusan Sormaz Speakers: Cihan Dagli, Djerdj Horvat, Nenad Ivezic, Lihui Wang
Westin Grand Ballroom
Emerging Methods for Advanced Manufacturing Systems Cihan Dagli1, Djerdj Horvat3, Nenad Ivezic4, Lihui Wang2 1MST, USA; 2KTH SE, Sweden; 3Fraunhofer Institute for Systems and Innovation Research ISI DE, Germany; 4NIST
12:40pm - 1:40pm Lunch break
1:40pm - 3:40pm Tue-13.40-Ch: Artificial Intelligence and Machine Learning in Manufacturing Session Chair: Yi-Chi Wang Session Chair: Sadegh MirshekarianChittenden Room
1:40pm - 2:00pm
Reinforcement Learning for Process Planning of Heavy Plate Rolling Richard Meyes1, Hanna Kahlfeld1, Alexander Krämer2, Gerhard Hirt2, Tobias Meisen1 1Institute of Information Management in Mechanical Engineering, RWTH Aachen University; 2Institute of Metal Forming, RWTH Aachen University
2:00pm - 2:20pm
Conceptual design of an intelligent ultrasonic crimping process using machine learning algorithms Michael Weigelt, Andreas Mayr, Johannes Seefried, Paul Heisler, Jörg Franke Institute for Factory Automation and Production Systems, Germany
2:20pm - 2:40pm
Recurrent Neural Network-Based Stencil Cleaning Cycle Predictive Modeling Haifeng Wang, Tian He, Sang Won Yoon Binghamton University, United States of America
2:40pm - 3:00pm
Online Control of Stencil Printing Parameters Using Reinforcement Learning Approach Nourma Khader, Sang Won Yoon Binghamton University, United States of America
3:00pm - 3:20pm
Machine Learning Approaches to Learning Heuristics for Combinatorial Optimization Problems Sadegh Mirshekarian, Dusan Sormaz Ohio University, United States of America
3:20pm - 3:40pm
A Direct-solution Fuzzy Collaborative Intelligence Approach for Yield Forecasting in Semiconductor Manufacturing Yi-Chi Wang1, Toly Chen2 1Department of Industrial Engineering and Systems Management, Feng Chia University, Taiwan; 2Department of Industrial Engineering and Management, National Chiao Tung University, Taiwan
1:40pm - 3:40pm Tue-13.40-Ga: Workshop, Cells and Assembly Lines, Part 1 Session Chair: Gursel Suer Additional fee, only for workshop ticket holders. Great Southern
Gallery
Workshop on flexibility in production and assembly lines, part 1 Gursel Suer Ohio University, United States of America
1:40pm - 3:40pm Tue-13.40-Ne: Lean and Agile Manufacturing 3 Session Chair: Nemanja Sremcev Session Chair: Sameh M SaadNeil Room
1:40pm - 2:00pm
Development of an Integrated Quality Management Conceptual Framework for Manufacturing Organisations Sameh M Saad, Mohamed Khamkham Sheffield Hallam University, United Kingdom
2:00pm - 2:20pm
Improving teaching and learning process by applying Lean thinking Nemanja Sremcev1, Milovan Lazarevic1, Branislava Krainovic3, Jovan Mandic2, Milovan Medojevic1 1Faculty of Technical Sciences, Serbia; 2Faculty of Education, Sombor, Serbia; 3HUTCHINSON, Ruma, Serbia
2:20pm - 2:40pm
Agility Capability Maturity Model framework Agnieszka Stachowiak, Joanna Oleśków-Szłapka Poznan University of Technology, Poland
2:40pm - 3:00pm
Applying SMED methodology in cork stoppers production Eduardo Alberto Cunha e Sousa1, Francisco J. G. Silva1, Luís Pinto Ferreira1, Maria Teresa Pereira1, Ronny Miguel Gouveia1, R. P. Silva2 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2Cork Supply Portugal, S.A., Rua Nova do Fial, 102, Apartado 19, Sao Paio de Oleiros 4536-907, Portugal
3:00pm - 3:20pm
Cost reduction and quality improvements in the printing industry António André Moreira1, Francisco J. G. Silva1, Aldina I. Correia2, Luís Pinto Ferreira1, Maria Teresa Pereira1, Fátima de Almeida2 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2ESTG - School of Management and Technology, Polytechnic of Porto, Portugal
3:20pm - 3:40pm
A Structural Literature Review of the Single Minute Exchange of Die: The Latest Trends Radu Godina1, Carina Pimentel2, Francisco J. G. Silva3, João C. O. Matias2 1C-MAST, University of Beira Interior, Portugal; 2GOVCOPP, DEGEIT, University of Aveiro, Portugal; 3ISEP - School of Engineering, Polytechnic of Porto
1:40pm - 3:40pm Tue-13.40-Pa: Manufacturing Systems Design and Analysis 2 Session Chair: Francisco J. G. Silva Session Chair: Anita TavaresPark Room
1:40pm - 2:00pm
Investigations on the Edge Crack root cause in Dual Phase steel stamping process Carlos R. M. Silva, Francisco J. G. Silva, Ronny M. Gouveia ISEP - School of Engineering, Polytechnic of Porto, Portugal
2:00pm - 2:20pm
On the Physical Vapour Deposition (PVD) Process Evolution Andresa Baptista1,2, Francisco J. G. Silva1, Gustavo Pinto1,2, J. Porteiro2, J. J. Míguez2, Liliana Fernandes1 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2Universidad de Vigo - Dpto. de Ingeniería Mecánica, Máq. y Motores Térmicos y Fluidos
2:20pm - 2:40pm
Study on the optimization of textile coloristic performance of bleaching process using pad steam Carla A. G. Tavares1, Francisco J. G. Silva1, Aldina I. Correia2, Maria Teresa Pereira1, Luís Pinto Ferreira1, Fátima De Almeida2 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2ESTG - School of Management and Technology, Polytechnic of Porto, Portugal
2:40pm - 3:00pm
Development of a novel equipment for automated clothing manufacturing P. M. M. Santos1, Raul D. S. G. Campilho1,2, Francisco J. G. Silva1 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2INEGI - Polo FEUP, Porto, Portugal
3:00pm - 3:20pm
Injection mold design for a plastic component with blowing agent Rui C. N. Barbosa1, Raul D. S. G. Campilho1,2, Francisco J. G. Silva1 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2INEGI - Polo FEUP, Porto, Portugal
3:20pm - 3:40pm
A novel rework costing methodology applied on a bus manufacturing company
Hélio Santos, Maria Teresa R. Pereira, Francisco J. G. Silva, Luís Pinto Ferreira ISEP - School of Engineering, Polytechnic of Porto, Portugal
1:40pm - 3:40pm Tue-13.40-Th: Sustainable Manufacturing and Engineering 4 Session Chair: Alan Ryan Session Chair: Maria De Fátima De Almeida FerreiraThurber Room
1:40pm - 2:00pm
Design of a manufacturing hub with modular automation units Mahdi Bashiri, Alireza Golkarian, Erfaneh Nikzad Shahed University, Iran, Islamic Republic of
2:00pm - 2:20pm
Compatibilization effect of organophilic clay in PA6/PP polymer blend Fátima De Almeida1, Aldina Correira1, Eliana Costa e Silva1, I. Cristina Lopes2, Francisco J. G. Silva3 1ESTG-School of Technology and Management, Polytechnic of Porto, Portugal; 2ISCAP – School of Accounting and Administration, Polytechnic of Porto, Portugal; 3ISEP – School of Engineering, Polytechnic of Porto
2:20pm - 2:40pm
Finite element analysis of paperboard package under compressional load Minhaj Zaheer1, Muhammad Awais2, Lauri Rautkari2, Joonas Sorvari1 1Lappeenranta University of Technology, Centre of Computational Engineering and Integrated Design (CEID), P.O. Box 20, Lappeenranta FI-53851, Finland; 2Aalto University of Technology, Department of Bioproducts and Biosystems, P.O. Box 11000, FI-00076 AALTO, FINLAND
2:40pm - 3:00pm
DYNAMIC JOINT CONSTRUCTION AND OPTIMAL STRATEGY OF MULTI-OBJECTIVE MULTI-PERIOD MULTI-STAGE REVERSE LOGISTICS NETWORK: A CASE STUDY OF LEAD BATTERY IN SHANGHAI Jianquan Guo1, Fang Jiang2, Mitsuo Gen3 1Sino-Germany school,University of Shanghai for Science and Technology, China, People's Republic of China; 2Business school, University of Shanghai for Science and Technology, China, People's Republic of China; 3Tokyo University of Science, Japan Fuzzy Logic Systems Institute, Japan
3:00pm - 3:20pm
Investigating Process Water Recovery within the Irish Dairy Industry. Elaine O'Connor, Alan Ryan, Patrick Cronin, Greg Lohan University of Limerick, Ireland
3:40pm - 4:10pm Coffee break
4:10pm - 5:30pm Tue-16.10-Ch: Additive, Subtractive and Hybrid Manufacturing 2 Session Chair: Hantang Qin Session Chair: Aditya Umesh MahadikChittenden Room
4:10pm - 4:30pm
Machine vision assisted micro-filament detection for real-time monitoring of electrohydrodynamic inkjet printing Hantang Qin Iowa State University, United States of America
4:30pm - 4:50pm
A novel approach to optimize the design of parts for Additive Manufacturing Francisco J. G. Silva, Raul D. S. G. Campilho, Ronny M. Gouveia, Gustavo F. L. C. Pinto, Andresa Baptista ISEP - School of Engineering, Polytechnic of Porto, Portugal
4:50pm - 5:10pm
Conversion of the SCARA Robot into a Hybrid Manufacturing Workstation Sanjeewa. S. Jayasinghe Gamaralalage, Jesus Pagan, Dusan Sormaz Ohio university, United States of America
5:10pm - 5:30pm
Cost Estimation of Layer Additive Manufacturing using Break-down approach Aditya Umesh Mahadik, Dale Masel Ohio University, United States of America
4:10pm - 5:30pm Tue-16.10-Ga: Workshop, Cells and Assembly Lines, Part 2 Session Chair: Gursel Suer Additional fee, only for workshop ticket holders. Great Southern
Gallery
Workshop on flexibility in production and assembly lines, part 2 Gursel Suer Ohio University, United States of America
4:10pm - 5:30pm Tue-16.10-Ne: Lean and Agile Manufacturing 4 Session Chair: Francisco J. G. Silva Session Chair: Damasio José Silva CorreiaNeil Room
4:10pm - 4:30pm
Analysis and Improvement of Processes in the Jewelry Industry Hugo Tiago Rocha, Luís Pinto Ferreira, Francisco J. G. Silva ISEP - School of Engineering, Polytechnic of Porto, Portugal
4:30pm - 4:50pm
A Practical Study of the Application of SMED to Electron-beam Machining in Automotive Industry Marc Martins1, Radu Godina2, Carina Pimentel3, Francisco J. G. Silva4, João C. O. Matias2,3 1Coficab-company Wires and Cables Ltd; 2C-MAST, University of Beira Interior, Portugal; 3GOVCOPP, DEGEIT, University of Aveiro, Portugal; 4ISEP - School of Engineering, Polytechnic of Porto
4:50pm - 5:10pm
Improving the multibrand channel distribution of a fashion retailer Tiago Silva, Maria Teresa R. Pereira, Luís Pinto Ferreira, Francisco J. G. Silva ISEP - School of Engineering, Polytechnic of Porto, Portugal
5:10pm - 5:30pm
Improving manual assembly lines devoted to complex electronic devices by applying Lean tools Damásio Correia, Francisco J. G. Silva, Ronny M. Gouveia, Maria Teresa Pereira, Luís Pinto Ferreira ISEP - School of Engineering, Polytechnic of Porto, Portugal
4:10pm - 5:30pm Tue-16.10-Pa: Modelling and Simulation of Manufacturing and Services 3 Session Chair: Georges AbdulNour Session Chair: Andreas ZellerPark Room
4:10pm - 4:30pm
A critical review on the numerical simulation related to Physical Vapour Deposition Gustavo Pinto1,2, Francisco J. G. Silva1, Andresa Baptista1,2, J. Porteiro2, J. J. Míguez2, Liliana Fernandes1 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2Universidad de Vigo - Dpto. de Ingeniería Mecánica, Máq. y Motores Térmicos y Fluidos
4:30pm - 4:50pm
Composition of Modular Models for Verification of Distributed Automation Systems
Andreas Zeller, Michael Weyrich University of Stuttgart, Germany
4:50pm - 5:10pm
OPTIMIZATION OF THE EMERGENCY DEPARTMENT IN HOSPITALS USING SIMULATION AND EXPERIMENTAL DESIGN: CASE STUDY Abdeljelil Aroua, Georges AbdulNour Université de Québec à Trois-Rivières, Canada
5:10pm - 5:30pm
Minimizing the adhesion effects in food packages forming by the use of advanced coatings Liliana Fernandes1,2, Francisco J. G. Silva1, Olga C. Paiva1, Andresa Baptista1, Gustavo Pinto1 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2COLEP PORTUGAL, S.A.
4:10pm - 5:30pm Tue-16.10-Th: Robotics and CIM 1 Session Chair: Mohammad Munir Ahmad Session Chair: Haifeng WangThurber Room
4:10pm - 4:30pm
On the development of a filament winding robotic system George-Christopher Vosniakos, Isabella Koustas, Theodore Papingiotis, Andi Dine National Technical University of Athens, Greece
4:30pm - 4:50pm
PID Control and Stability Analysis of an ith Leg of a Six Degree of Freedom Machining Bed Muhammad Faizan Shah1, Zareena Kausar2, Mohammad Munir Ahmad3 1Khwaja Fareed University of Engineering and Information Technology,Rahim Yar Khan, Pakistan; 2Air University, Islamabad, Pakistan; 3Khwaja Fareed University of Engineering and Information Technology,Rahim Yar Khan, Pakistan
4:50pm - 5:10pm
Smart Manufacturing of Thermoplastic CFRP Skins Alfons Schuster, Lars Larsen, Frederic Fischer, Roland Glück, Stefan Schneyer, Michael Kühnel, Michael Kupke German Aerospace Center, Germany
5:10pm - 5:30pm
Comparison of Four Population-Based Meta-Heuristic Algorithms on Pick-and-Place Optimization Tian He, Haifeng Wang, Sang Won Yoon Binghamton University, United States of America
6:00pm - 7:00pm Guided Tour of Downtown Columbus Meet in the Foyer 6:00 pm sharp. Dinner on your own. Foyer
Date: Wednesday, 13/Jun/2018
8:30am - 9:00am Registration
8:30am - 9:50am Wed-08.30-Ch: Design and Manufacturing of Personilized Products and Services 2 Session Chair: Gary Zheng Session Chair: Paolo GuardianiChittenden Room
8:30am - 8:50am
A table-top demonstration of intelligent products and human operators for agent-based manufacturing systems Gary Zheng, Ilya Kovalenko, Kira Barton, Dawn Tilbury University of Michigan
8:50am - 9:10am
A negotiation based approach for agent based production scheduling Matthias Klein, Andreas Löcklin, Nasser Jazdi, Michael Weyrich University of Stuttgart, Germany
9:10am - 9:30am
Novel Integrated Robotic System for Tiny Duct Inspection Paolo Guardiani, Carlo Canali, Alessandro Pistone, Sergio Leggieri, Claudio Gloriani, Nahian Rahman, Ferdinando Cannella, Darwin Caldwell Istituto Italiano di Tecnologia, Italy
9:30am - 9:50am
CLEANING AND INSPECTION OF AIR CONDITIONING DUCTS WITH ROVER EXPLORER ROBOT Filipe Santos Aureliano1, Ariellen Aparecida Fidelis Costa2, Alexandre de Oliveira Lopes Lopes3 1Centro Universitário de Minas Gerais - UNIS MG, Brazil; 2Centro Universitário de Minas Gerais - UNIS MG, Brazil; 3Centro Universitário de Minas Gerais - UNIS MG, Brazil
8:30am - 9:50am Wed-08.30-Ga: Digital, Cyber and Cloud Manufacturing 2 Session Chair: F. Frank Chen Session Chair: Kyoung-Yun Kim Great Southern
Gallery
8:30am - 8:50am
A Mathematical Model for Task Scheduling in Cloud Manufacturing Systems focusing on Global Logistics Jalal Delaram1, Omid Fatahi Valilai2 1Sharif University of Technology, Islamic Republic of Iran; 2Sharif University of Technology, Islamic Republic of Iran
8:50am - 9:10am
Hybrid Nugget Width Prediction for Resistance Spot Welding Jaemun Sim, Kyoung Yun Kim Wayne State University, United States of America
9:10am - 9:30am
A modified discrete invasive weed algorithm for optimal service composition in cloud manufacturing systems Hamed Bouzary, F. Frank Chen, Krishnan Krishnaiyer The University of Texas at San Antonio, United States of America
9:30am - 9:50am
Challenges Building a Data Value Chain to Enable Data-Driven Decisions: A Predictive Maintenance Case in 5G-Enabled Manufacturing
Magnus Åkerman1, Camilla Lundgren1, Maja Bärring1, Mats Folkesson2, Viktor Berggren2, Johan Stahre1, Ulrika Engström2, Martin Friis3 1Chalmers, Sweden; 2Ericsson, Sweden; 3SKF, Sweden
8:30am - 9:50am Wed-08.30-Ne: CAD/CAM 1 Session Chair: Dong-Won Kim Session Chair: Tobias StefanakNeil Room
8:30am - 8:50am
Simulation of human-robot collaboration by means of power and force limiting Uwe Dombrowski1,2, Tobias Stefanak1,2, Anne Reimer1,2 1Institute for Advanced Industrial Management; 2TU Braunschweig, Germany
8:50am - 9:10am
Timely and Efficient Chatter Onset Detection for End Milling Besmir Cuka1, Minho Cho2, Dong-Won Kim1 1Department of Industrial and Information Systems Engineering, Chonbuk National University, Jeonju, South Korea; 2Korea Marine Equipment Research Institute, Gunsan, Jeollabuk-do, South Korea
9:10am - 9:30am
Comprehensive Analysis of Chatter Recognition using Multiple Sensors and Multi-layer Neural Networks Oscar Velásquez Arriaza, Zagaa Tumurkhuyagc, Dong-Won Kim Department of Industrial and Information Systems Engineering, Chonbuk National University, Jeonju 54896, South Korea
9:30am - 9:50am
Effect of Cryogenic Machining for Titanium Alloy Based on Indirect, Internal and External Spray System Mohd Azlan Suhaimi1, Gi-Dong Yang2, Kyung-Hee Park2, Mohd Juzaili Hisam1, Safian Sharif1, Dong-Won Kim3 1Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, 81310, Johor, Malaysia; 2Korea Institute of Industrial Technology, Cheonan-si Chungcheongnam-do, 31056, South Korea; 3Department of Industrial and Information Systems Engineering, Chonbuk National University, Jeonju, 54896, South Korea
8:30am - 9:50am Wed-08.30-Pa: Collaborative Robotics in Smart Manufacturing 2 Session Chair: Egon Muller Session Chair: Varun GopinathPark Room
8:30am - 8:50am
Human-Robot collaboration in a small-scale rail industry: Demanufacturing operations Humbulani Simon Phuluwa, Khumbulani Mpofu TUT, South Africa
8:50am - 9:10am
A Context-Aware Safety System for Human-Robot Collaboration Hongyi Liu, Yuquan Wang, Wei Ji, Lihui Wang KTH-Royal Institute of Technology, Sweden
9:10am - 9:30am
Demonstrators to support research in Industrial safety - A Methodology Varun Gopinath, Micael Derelöv, Kerstin Johansen Linköping University, Sweden
9:30am - 9:50am
Evaluation of use cases of autonomous mobile robots in factory environments Hendrik Unger, Tobias Markert, Egon Müller
Department of Factory Planning and Factory Management, Technische Universität Chemnitz, Germany
8:30am - 9:50am Wed-08.30-Th: Robotics and CIM 2 Session Chair: Csaba Raduly-Baka Session Chair: Bahaa AnsafThurber Room
8:30am - 8:50am
A novel concept of CNC machining center automatic feeder Manuel Barbosa1, Francisco J. G. Silva1, Carina Pimentel2, Ronny M. Gouveia1 1ISEP - School of Engineering, Polytechnic of Porto, Portugal; 2GOVCOOP, DEGEIT, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
8:50am - 9:10am
Influence of Humidity and Actuation time on Electromechanical Characteristics of Ionic Polymer-Metal Composite Actuators Bahaa Ansaf, Trung Huy Duong, Nebojsa I. Jaksic, Jude L. DePalma, Aiman Al-Allaq, Brandon DeHerrera, Boyan Li Colorado State University Pueblo, United States of America
9:10am - 9:30am
Efficient tool loading heuristic for machines with modular feeder units. Csaba Raduly-Baka1, Juha Makila1, Mika Johnsson2, Olli Nevalainen1 1University of Turku, Finland; 2Siemens
10:00am - 10:50am Wed-10.00-Gb: Keynote 4: Hybrid Evolutionary Algorithms for SemiconductorManufacturing Scheduling Session Chair: Gursel Suer Presenter: Mitsuo Gen,Research Institute for Science and Technology, Tokyo University of Science, Japan
Westin Grand Ballroom
10:00am - 10:50am
Hybrid Evolutionary Algorithms for Semiconductor Manufacturing Scheduling Mitsuo Gen1,2 1Fuzzy Logic Systems Institute, Tokyo, Japan; 2Tokyo University of Science, Tokyo, Japan
10:50am - 11:20am Coffee break
11:20am - 12:40pm Wed-11.20-Ch: Design and Manufacturing of Personilized Products and Services 3 Session Chair: Dusan Sormaz Session Chair: Ulas YamanChittenden Room
11:20am - 11:40am
3D Printed Composite Keyboard Switches Alec Michael Peery, Dusan N. Sormaz Ohio University, United States of America
11:40am - 12:00pm
Innovative okro slicing machine design and manufacturing Julian Chika Aririguzo, Chukwuma Henry Kadurumba Michael Okpara University of Agriculture, Umudike, Abia State, Nigeria, Nigeria
12:00pm - 12:20pm
Tuning the Center of Gravity of 3D Printed Artifacts Mert Keles, Ulas Yaman Middle East Technical University, Turkey
12:20pm - 12:40pm
Research on Morphology and Semantics of Industrial Design for CNC Machine Tools Xihui Yang1, Xin Zhou1, Kai Cheng2
1Department of Industrial Design, School of Mechano-Electronic Engineering, Xidian University, Xian, P.R. China; 2College of Engineering, Design and Physical Sciences Brunel University, Uxbridge UB8 3PH, UK
11:20am - 12:40pm Wed-11.20-Ga: Digital, Cyber and Cloud Manufacturing 1 Session Chair: Djerdj Horvat Session Chair: Li-Chih Wang Great Southern
Gallery
11:20am - 11:40am
A conceptual approach for analysing manufacturing companies’ profiles concerning Industry 4.0 in emerging countries Djerdj Horvat1, Thomas Stahlecker1, Andrea Zenker1, Christian Lerch1, Marko Mladineo2 1Fraunhofer Institute for Systems and Innovation Research ISI, Germany; 2University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
11:40am - 12:00pm
Development of a Cloud-based Advanced Planning and Scheduling System Tzu-Han Hsu, Li-Chih Wang, Pei-Chun Chu Tunghai University, Taiwan
12:00pm - 12:20pm
BDI-based Multi-agent System for Cloud Manufacturing Process Planning Dusan Sormaz, Arkopaul Sarkar Ohio University, United States of America
12:20pm - 12:40pm
INDUSTRIAL MONITORING WITH DRONE AUTONOMOUS Filipe Santos Aureliano1, Ariellen Aparecida Fidelis Costa2, Alexandre de Oliveira Lopes Lopes3 1Centro Universitário de Minas Gerais - UNIS MG, Brazil; 2Centro Universitário de Minas Gerais - UNIS MG, Brazil; 3Centro Universitário de Minas Gerais - UNIS MG, Brazil
11:20am - 12:40pm Wed-11.20-Ne: CAD/CAM 2 Session Chair: Dong-Won Kim Session Chair: Sajid Ullah ButtNeil Room
11:20am - 11:40am
Thermo-Physical and Lubricating Properties of Silicon Carbide Nanofluid for Machining Operations Ibrahim Ogu Sadiq1, Safian Sharif2, Mohd Azlan Suhaimi2, Noordin Mohd Yusof2, Dong-Won Kim3 1Department of Mechanical Engineering, Federal University of Technology, Minna, P.M.B 65, Minna, Nigeria; 2Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, 81310, Johor Bahru, Johor, Malaysia; 3Department of Industrial and Information Systems Engineering, Chonbuk National University, Jeonju 54896, South Korea
11:40am - 12:00pm
Accuracy Analysis of 3-RSS Delta Parallel Manipulator Mansoor Ghazi, Qasim Nazir, Sajid Ullah Butt, Aamer Ahmed Baqai National University of Sciences and Technology, Pakistan
12:00pm - 12:20pm
Integrating 3D Product Models with Assembly Line Balancing via Process Consumption David Sly Proplanner, United States of America
11:20am - 12:40pm Wed-11.20-Pa: Collaborative Robotics in Smart Manufacturing 3 Session Chair: Harry Pierson Session Chair: Lars LarsenPark Room
11:20am - 11:40am
Meeting The Needs of Industry in Smart Manufacture - The Definition of a New Profession and a Case Study in Providing the Required Skillset. Seamus Gordon1, Alan Ryan1, Shane Loughlin2 1University of Limerick, Ireland; 2ESE Academy Ltd. Ireland
11:40am - 12:00pm
A Framework for Collaborative Robotic Task Specification Steven L. Brown, Harry A. Pierson University of Arkansas, United States of America
12:00pm - 12:20pm
Digital twins of human-robot collaboration in a production setting Ali Ahmad Malik, Arne Bilberg University of Southern Denmark, Denmark
12:20pm - 12:40pm
Path Planning of Cooperating Industrial Robots Using Evolutionary Algorithms Lars Larsen1, Alfons Schuster1, Jonghwa Kim2, Michael Kupke1 1German Aerospace Center (DLR); 2University of Science & Technology (UST)
11:20am - 12:40pm Wed-11.20-Th: Robotics and CIM 3 Session Chair: Varun Gopinath Session Chair: Alireza ZarrehThurber Room
11:20am - 11:40am
Stochastic Search Methods for Mobile Manipulator Calibration Samuel Yaw Amoako-Frimpong1, Henry Medeiros1, Jeremy Marvel2, Roger Bostelman2 1Marquette University, United States of America; 2National Institute of Standards and Technology, United States of America
11:40am - 12:00pm
Collaborative Assembly on a Continously Moving Line - An automotive Case Study Varun Gopinath1, Kerstin Johansen1, Stefan Axelsson2, Åke Gustafson2 1Linköping University, Sweden; 2Volvo Cars, Torslanda, Gothenburg, Sweden
12:00pm - 12:20pm
Posture-dependent stability prediction of a milling industrial robot based on inverse distance weighted method Chen Chen1, Fangyu Peng2, Rong Yan1, Yuting Li1, Zheng Fan1, Dequan Wei1 1National NC System Engineering Research Center, School of Mechanical Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China; 2State Key Laboratory of Digital Manufacturing Equipment and Technology, School of Mechanical Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China
12:20pm - 12:40pm
Cybersecurity Analysis of Smart Manufacturing System Using Game Theory Approach and Quantal Response Equilibrium Alireza Zarreh1, Can Saygin1,2, Hung-Da Wan1,2, Yooneun Lee1,2, Alejandro Bracho Avila1, Li Nie3 1Department of Mechanical Engineering, University of Texas at San Antonio, San Antonio, Texas 78249, USA; 2Center for Advanced Manufacturing and Lean Systems, University of Texas at San Antonio, San Antonio, Texas 78249, USA; 3School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, 2360 Jinhai Road, Pudong District, Shanghai, China,201209
12:40pm - 2:30pm Lunch on your own
2:30pm - 4:00pm Trip to Ohio University Meet 2:15 - 2:30 in Foyer for trip to Athens for closing ceremony and tour Foyer
4:00pm - 5:00pm Tour Athens downtown area
5:00pm - 6:30pm Ohio University Campus Tour
7:00pm - 10:00pm Dinner and Closing Ceremony Athens County Community Center.
10:00pm - 11:30pm Return to Columbus
Date: Thursday, 14/Jun/2018
8:00am - 12:00pm Thu-08.00-Ou: Dayton Air Force Museum Tour
8:15am - 12:00pm Thu-08.15-Ou: Honda Plant Tour
9:00am - 12:30pm Thu-09.00-Ou: EWI Tour
