CONFERENCE AGENDA - Intergraph · p& iD ntegration Vivek Mokashi, Intergraph impr u intergraph’ u E m S Rick Standish, Intergraph 1200 L D C 3D interoperability E Arnab Biswas and

INTERGRAPH 2012 SOUTHEAST ASIA

CONFERENCE AGENDAProcess, Power & Marine17-18 July 2012 ∙ Kuala Lumpur, Malaysia

Intergraph 2012 SoutheaSt aSIa

2

Time KeynoTes Ballroom 3

9.00amWelcome Address Khoo Hong Leng, Regional Manager, Process, Power & Marine, Southeast Asia, Intergraph

9.10amIntergraph Process, Power & Marine in Asia-Pacific: Thinking Forward Franz Kufner, Senior Vice President, Process, Power & Marine, Asia-Pacific, Intergraph

9.40amUnlock the Full Potential of Your Enterprise Patrick Holcomb, Executive Vice President, Global Business Development, Process, Power & Marine, Intergraph

10.25amEstablishing an Enterprise-wide Electronic Document and Data Management System (EDMS) at PETRONAS Zahri Zainal Abidin, Senior Manager, Planning Sourcing and Category Management (PSCM), Group Supply Chain Management (GSCM), PETRONAS

10.45am BREAK

11.10amBuilding an Engineering Excellence Driven Utility Organisation Using SmartPlant Enterprise Riekie Swanepoel, Chief Technologist of Engineering and System Integration Department, Eskom Generation Business Engineering, Eskom Holdings

11.40amEngineering Validation and Visual Asset Management: The Future is Now Patrick Holcomb and the Intergraph Process, Power & Marine Southeast Asia Team

12.25pmCAXperts Overview Anton Schreibmueller, Chief Executive Officer, Global Professional Services, CAXperts

12.30pmBuilding Information Modelling (BIM) in Offshore Structures Mick Hodgson, Technical Manager, B&C Steel Segment, Tekla Oyj

12.35pm LUNCh – BALLROOM 2

JuNIOR BALLROOM 1 BALLROOM 3 BuNGA RAyA ROOM JuNIOR BALLROOM 2

smarT 3D enTerpriseprocuremenT, FaBricaTion & consTrucTion

engineering & schemaTics

1.45pmSmart 3D Solutions

Tom Szoka and Jeff Bashir, Intergraph

SmartPlant Foundation: Speeding the Time to

Information Value Rick Standish and Supratim Mukhopadhyay, Intergraph

SmartPlant Materials and SmartPlant Reference Database Solutions

Michael Buss and Vineesh Gupta, Intergraph

Engineering & Schematics:

Engineering & Beyond Frank Joop, Intergraph

2.45pm

Challenges in Deploying New Technology at

WorleyParsons London Lewis Quinn, WorleyParsons

Introducing SmartPlant Fusion

Supratim Mukhopadhyay, Intergraph

Energising your Electrical Design

Ronnie Moss, Intergraph

3.15pm BREAK

3.45pm

Marine and Offshore Solutions

Jeff Bashir, Intergraph

SmartPlant Enterprise Implementation at Technip

Fabrice Bouget and Jean-Luc Hoffert, Technip

SmartPlant Construction Tim McDavid, Intergraph

Smart Project Execution with Engineering

& Schematics Ronnie Moss, Intergraph

4.15pm

Owner Operator Solutions Adrian Park and

Ray Howarth, Intergraph4.30pm

inDusTryMaking the Right

Decision Early Frank Joop, Intergraph

Leica Geosystems Solutions for Intergraph PP&M

Faheem Khan, Leica Geosystems

5.15pm DAy 1 – CONFERENCE CLOSE

5.30pm Intergraph 2012 Southeast Asia Reception – Pre-Dinner Drinks Intercontinental Hotel Poolside

6.30pm Intergraph 2012 Southeast Asia Dinner Intercontinental Hotel Poolside Barbeque

17 July 2012 – Day One


3

Junior Ballroom 1 Ballroom 3 Junior Ballroom 2

Time SmarT 3D enTerpriSe inDuSTry

9.00am Smart 3D new Features Tom Szoka, Intergraph

Brownfield Design Base Capture and maintenance

Adrian Park and Ray Howarth, Intergraph

intergraph Solutions for the Power Generation industry

Kevin Gribbin, Intergraph

9.45amSmart 3D integration

Vivek Mokashi and Jeff Bashir, Intergraph

Process Safety and asset integrity management Solutions

Adrian Park and Ray Howarth, Intergraph

mining industry Solutions Tom Szoka, Intergraph

10.30am Break

11.00am

SmartPlant 3D in production at Technip France

Jean-Luc Hoffert and Thomas Kerjouan, Technip France

CaPeX and oPeX Project Delivery Adrian Park, Intergraph CaeSar ii, PV elite & Tank:

improving engineering Collaboration for SmartPlant

enterprise Paulo Moncores, Intergraph

11.30amSmart 3D and SmartPlant

P&iD integration Vivek Mokashi, Intergraph

improving the user experience: intergraph’s user experience and

mobile Strategy Rick Standish, Intergraph

12.00pm

legacy Data and 3D interoperability Arnab Biswas and

Jeff Bashir, Intergraph

SmartPlant enterprise: Streamlining enterprise integration

Rick Standish, Intergraph

CaDWorx fieldPipe: Capturing existing Facilities to Create

intelligent Deliverables William Rasco, Intergraph

12.30pm Lunch – Serena BraSSerie, GrounD Floor

ConFerenCe CloSe

18 July 2012 – Day TwO


4

Khoo Hong LengRegional Manager, Process, Power & Marine, Southeast Asia, Intergraph

As Regional Manager, Khoo has been responsible for Malaysia and Brunei sales operations for the last six years. He joined Intergraph® in the early 90s, and has held various positions throughout his 16-year career at Intergraph. These have ranged from a support engineer, to application development for customers in

Southeast Asia, through to project manager and support manager roles. Prior to rejoining Intergraph in 2006, he was with SDRC and EDS as Business Manager. Khoo holds a bachelor’s degree in applied science from Swinburne University in Australia, majoring in instrumentation and computer science.

Franz KufnerSenior Vice President, Process, Power & Marine, Asia-Pacific, Intergraph

Franz is responsible for Intergraph Process, Power & Marine division’s business operations in Asia-Pacific. Prior to this role, he was country manager for the Greater China region, and has also held business development positions with Intergraph. He has also managed Intergraph’s information management and

material management solutions both globally and within the Asia-Pacific region. Franz has more than 22 years of engineering, procurement, and construction (EPC) experience in the oil and gas, petrochemical, and mining industries, where he has been responsible for the delivery of major capital projects in the capacity of manager of the engineering and projects departments. He holds a bachelor’s degree in electrical engineering.

Patrick HolcombExecutive Vice President, Global Business Development, Process, Power & Marine, Intergraph

Patrick is the Executive Vice President of Global Business Development for Intergraph’s Process, Power & Marine division, with responsibility for mergers/acquisitions and product strategic planning. He has a background in process industry engineering, technology startups, IT strategy, and global software marketing. Prior to working at Intergraph, Patrick was founder and VP Business Development for Industria,

securing $34 million in initial capital for a procurement and materials management software startup in Silicon Valley. Prior to that, his experience at Accenture in San Francisco was in the arena of IT strategy and corporate development. Patrick’s first job was with ExxonMobil, where he held several roles including maintenance engineer, process engineer, and refinery coordinator. Patrick’s education includes a Bachelor of Science in Mechanical Engineering from Washington University in St. Louis, and a Master of Business Administration from the University of Michigan.

Zahri Zainal AbidinSenior Manager, Planning Sourcing and Category Management (PSCM), Group Supply Chain Management (GSCM), PETRONAS

Zahri has been at PETRONAS for over four years, and he currently serves as Senior Manager for Planning Sourcing and Category Management (PSCM) and Group Supply Chain Management (GSCM). He has also previously held senior manager roles of other divisions at PETRONAS, including engineering and

construction, and rotating, electrical, and instrumentation. Prior to joining PETRONAS, he was at MTBE Polypropylene Malaysia, moving from production planning and production technology, to operations engineer, through to shift supervisor. Zahri graduated from Universiti Kebangsaan Malaysia.

KeynOTe SpeaKer BiOgraphieS

5


Riekie Swanepoel Chief Technologist of Engineering and System Integration Department, Eskom Generation Business Engineering, Eskom Holdings

As Chief Technologist and previously Engineering Systems and Support Manager of Eskom Generation Business Engineering Division, Riekie has responsibility for the management of key SmartPlant® Enterprise aspects as the common engineering system platform for the organisation. She has 22 years of experience

in the power generation industry, and over the years, has been involved in a number of strategic divisional projects, such as compiling the general information management strategy, business process management projects, plant asset management and optimisation initiatives, integrated engineering system implementations, boiler health monitoring and management systems, condition monitoring management, and research. Riekie also drives numerous new technology initiatives under the Generation Engineering Design Infrastructure (GEDI) project, and is closely involved in the execution of the associated activities, which includes implementation and optimisation of the integrated common engineering system on the SmartPlant Enterprise V2009.1 platform. Riekie holds a master’s diploma in mechanical engineering from Vaal University of Technology, and an Engineering Business Management Diploma from University of Warwick, UK. She is also registered as a professional technologist with Engineering Council of South Africa, as well as a member of the Computer Society of South Africa.

KeynOTe aBSTracTS – Day One

Intergraph Process, Power & Marine in Asia-Pacific: Thinking Forward Franz Kufner, Senior Vice President, Process, Power & Marine, Asia-Pacific, Intergraph

Intergraph’s Process, Power & Marine division is working with customers around the world to think forward, helping them to increase productivity, accelerate projects, and gain a competitive edge. Intergraph’s SmartPlant and SmartMarine® Enterprise suites of solutions are part of the broadest product portfolio available in the market, offering the future of engineering today to both EPCs and owner operators. This keynote will highlight some industry trends, as well as several Intergraph customers and their success stories from using SmartPlant and SmartMarine Enterprise solutions. Customers using these industry-leading solutions report more than 30% productivity gains, which is extremely important in an increasingly competitive global market. With over 40 years of innovation, stability, and market leadership, this session will demonstrate why Intergraph is a proven and dedicated partner for our customers.

Unlock the Full Potential of Your EnterprisePatrick Holcomb, Executive Vice President, Global Business Development, Process, Power & Marine, Intergraph

A growing number of leading companies in the process, power and marine industries are looking beyond traditional point solutions from a multitude of software vendors that deliver only modest productivity gains. Instead, they are embracing new technology that unlocks the full potential of their own enterprises to gain a competitive advantage in today’s markets. Intergraph Process, Power & Marine provides integrated and scalable software for plant engineering and operation that enables real competitive advantage. This keynote will give an overview on the division’s status, outlook, and some technology and market trends. This session will also highlight some of Intergraph’s most advanced technology enablers for interoperability, quality, construction excellence, and operations efficiency.

KeynOTe SpeaKer BiOgraphieS


6

Establishing an Enterprise-wide Electronic Document and Data Management System (EDMS) at PETRONASZahri Zainal Abidin, Senior Manager, Planning Sourcing and Category Management (PSCM), Group Supply Chain Management (GSCM), PETRONAS

PETRONAS is the national oil company in Malaysia, and is one of the largest companies in the world. This session will give you an overview about the company, and its strategy for establishing an industry-standard electronic document and data management system (EDMS) at PETRONAS to support its projects. You will learn more about the challenges that PETRONAS faces, and how it is addressing these issues by implementing Intergraph’s innovative and intelligent technology for enhanced safety, quality, and productivity of its engineering projects.

Building an Engineering Excellence Driven Utility Organisation Using SmartPlant Enterprise Riekie Swanepoel, Chief Technologist of Engineering and System Integration Department, Eskom Generation Business Engineering, Eskom Holdings

In this session, Eskom Holdings in South Africa will share information on how it is building an engineering excellence driven power utility organisation by deploying an integrated engineering framework and operating model. By using systems technology like SmartPlant Enterprise, Eskom Holdings can support execution of this framework and model in a standardised, optimised, and simplified manner.

This session will cover the challenges facing the organisation, discussion on the elements of the operating model approach, and how SmartPlant Enterprise is being implemented to enable the organisation. You will learn about the use of SmartPlant Enterprise, its augmentation with SmartPlant Enterprise for Owner Operators (SPO) capabilities, and the exposing of this engineering design base information via the SmartPlant Foundation portal. This session will also show how interoperability with other visualisation technologies, as well as 3D laser scanning technologies, can enable a power utility to create, build, and maintain its design base as contained in the plant information virtual asset in the SmartPlant Enterprise platform. It will also highlight the lessons learned during the execution of work to date.

Engineering Validation and Visual Asset Management: The Future is NowPatrick Holcomb and the Intergraph Process, Power & Marine Southeast Asia Team

A growing number of leading companies in the process, power and marine industries are looking beyond traditional point solutions from a multitude of software vendors that deliver only modest productivity gains. Instead, they are embracing new technology that unlocks the full potential of their own enterprises to gain a competitive advantage in today’s markets. Intergraph Process, Power & Marine provides integrated and scalable software for plant engineering and operation that enables real competitive advantage. This keynote will give an overview on the division’s status, outlook, and some technology and market trends. This session will also highlight some of Intergraph’s most advanced technology enablers for interoperability, quality, construction excellence, and operations efficiency.

KeynOTe aBSTracTS – Day One


7

SmARt 3D

Smart 3D SolutionsTom Szoka and Jeff Bashir, Intergraph

Intergraph has added significant new features in its 3D solutions designed specifically to increase productivity and enhance performance. Intergraph experts will discuss the business and technical benefits of new features in the latest releases of SmartPlant 3D, SmartMarine 3D, SmartPlant 3D Materials Handling Edition, PDS®, and SmartPlant Review. This session will enable you to learn how to improve your engineering designs and take full advantage of the latest software and upcoming releases.

Challenges in Deploying New Technology at WorleyParsons LondonLewis Quinn, WorleyParsons

This session will explore the journey of WorleyParsons London to implement SmartMarine 3D alongside existing tools through the Nautilus initiative. It will also discuss the challenges of altering existing work practices to optimise system use. This session will detail the reasons why the marine flavour of Smart 3D technology was chosen to form the basis of a single engineering build. WorleyParsons London has leveraged its existing integration experience for design execution to achieve greater levels of automation, leading to higher quality and consistency.

Marine and Offshore SolutionsJeff Bashir, Intergraph

Integrated projects require integrated solutions. Today, almost all companies face some challenges when working in integrated environments. It could be as simple as different 3D disciplines using different software for modelling that are not compatible, resulting in a loss of information/data in translation, or to ensure the consistency of data in the integration of 2D and 3D tools. This session will highlight Intergraph solutions for integration between different 3D disciplines, as well as 2D and 3D tools, and how you can maintain consistent data while improving engineering and design quality.

preSenTaTiOn aBSTracTS – Day One


8

ENtERpRiSE

SmartPlant Foundation: Speeding the Time to Information ValueRick Standish and Supratim Mukhopadhyay, Intergraph

Increased performance, enhanced useability, and simpler deployment. These three key values have been the mantra for the latest development cycle of the information management products. This session will discuss the business and technical benefits of the new features, including multi-CPU performance to scale our solutions to the largest user communities, useability enhancements to the web portal, and simplified configuration and mapping. You will also learn how to take full advantage of the latest software to improve performance and productivity, along with an overview of key strategic initiatives, such as SmartPlant Enterprise Control Panel, SmartPlant Fusion, SmartPlant VTL (Validation, Transformation, and Loading), Master Tag Register, and a new Electronic Document and Data Management System (EDMS) module.

Introducing SmartPlant FusionSupratim Mukhopadhyay, Intergraph

Learn more about SmartPlant Fusion, Intergraph’s new solution that utilises SmartPlant Foundation’s well-known structured information handling capabilities to load and visualise unstructured information, ranging from scanned images, PDF files, vendor documents, through to native CAD files and semi-intelligent engineering lists via quick view web-based portals SmartPlant Fusion makes use of various technologies for the extraction of intelligence from the myriad of unstructured data and documents, such as OCR-ing, intelligent format recognition, and aliasing to allow searching and graphical navigation across the entire set of unstructured information. This innovative solution also provides two-way navigation between CAD files and hot-linked laser scans of a plant, allowing identification of out-of-date drawings and facilitating an intelligent as-built process. This session is a must for any owners dealing with brownfield/legacy information, or EPCs dealing with information such as vendor documents, but at a loss on how to extract value and manage these sources in a simple and cost-effective manner.

SmartPlant Enterprise Implementation at TechnipFabrice Bouget and Jean-Luc Hoffert, Technip

As a leading EPC dealing with major international and national oil and gas companies, Technip is always looking for continuous improvement, both in terms of quality and productivity to meet market expectations. Technip management decided to take advantage of a data-centric concept for integration. In 2007, the company launched an initiative that selected the SmartPlant Enterprise suite to build a generic solution for the Technip Group. This session will showcase the challenges that Technip has faced in setting up and managing the different phases of such a development project, all the way up to its first deployment in production on a real project. It will also highlight the benefits that Technip has gained by using SmartPlant Enterprise.

Owner Operator SolutionsAdrian Park and Ray Howarth, Intergraph

The last 12 months have seen the scope of existing SmartPlant Enterprise for Owner Operators (SPO) template solutions further increased, and the development and launch of important new solutions. This session will present an overview of these new solutions, including an exciting new mobile solution that supports plant floor and other field workers with access data and documentation offline, and helps them directly capture information on-site. You will also learn more about new technologies for exploiting 3D models for interactive training and planning of maintenance, inspection, and other activities. This session will also highlight selected owner operator success stories.


9


pROCuREmENt, FAbRiCAtiON & CONStRuCtiON

SmartPlant Materials and SmartPlant Reference Database SolutionsMichael Buss and Vineesh Gupta, Intergraph

Key factors in the market share growth of SmartPlant Reference Data and SmartPlant Materials include flexibility, combined with rich and comprehensive functionality, reflecting industry best practices. This session will focus on the continuing, market-driving development strategies for SmartPlant Reference Data and SmartPlant Materials, and major enhancements in the latest versions. Some of the 2012 enhancements include better integration with Smart 3D, APIs for materials tracking at the job site, and the availability for more content for SmartPlant Reference Data.

SmartPlant ConstructionTim McDavid, Intergraph

This session will discuss the key factors of current SmartPlant Construction product functionality and its future roadmap. The Intergraph solution has grown based on partnerships with construction industry experts during its development cycles. In this session, you will learn about SmartPlant Construction’s short-, mid-, and long-term development strategies.

iNDuStRy

Leica Geosystems Solutions for Intergraph Process, Power & MarineFaheem Khan, Leica Geosystems

Leica Geosystems is one of the world’s largest suppliers of geospatial technology products, delivering trusted solutions supporting front-end design, ongoing construction, and full asset management support. This session will explore the various types of customer deployment of geospatial technology products and demonstrates, through case studies, the benefits of using such advanced capabilities to support and validate planning, design, engineering, construction, and management activities with a strong emphasis on the latest in 3D scanning integration.



10

ENGiNEERiNG & SChEmAtiCS

Engineering & Schematics: Engineering & BeyondFrank Joop, Intergraph

“To improve is to change; to be perfect is to change often.” – Winston Churchill Intergraph is changing to improve and exceed the needs and expectations to help our customers face the challenges in the industry. This session will address three main topics: innovation and how Intergraph is bringing the new capabilities in the Engineering & Schematics solution to help your business, lower cost of ownership and the steps we are taking to make deployment easier and faster on projects, and our support and services that we offer to make sure you will be successful with our solutions. You will learn about the improvements of our engineering solutions beyond what is possible today.

Energising Your Electrical DesignRonnie Moss, Intergraph

This session will feature SmartPlant Engineering & Schematics solutions, with a focus on SmartPlant Electrical. SmartPlant Engineering & Schematics solutions contribute significantly toward the bottom line for EPCs and plant owners, delivering improved safety, design quality, and productivity, resulting in reduced execution and operational risks. In this session, you will learn more about the unique capabilities of SmartPlant Engineering & Schematics solutions, such as rules and connectivity-driven design that support the work processes for all parties involved, yielding true business benefits.

Smart Project Execution with Engineering & SchematicsRonnie Moss, Intergraph

Consistency of data across multiple disciplines is the minimum requirement for today’s mega projects. Strategising upfront for sharing data effectively is the key to a successful project. A few simple guidelines make all the difference between getting it right for a smart, effective project execution, and getting it wrong where it could cost millions and long delays. In this session, learn about the guidelines and strategies to make this important task easy, and the tools to help you get it right the first time.

Making the Right Decision EarlyFrank Joop, Intergraph

Making changes late in the project cycle is high-risk and often very costly. How can you address this risk while also driving quality and consistency in the engineering design? This session will introduce SmartPlant P&ID Engineering Integrity, which allows you to enforce engineering, safety, and operational practices early on in the design. See how experience can be captured and applied to projects across the company. This is a game-changing solution that is innovative and has a very clear value proposition. In this session, learn how to make the right decisions early and reduce the risk of late changes, compromises, and increase the overall design quality on your projects.



11

SmARt 3D

Smart 3D New FeaturesTom Szoka, Intergraph

This session builds on the Smart 3D Solutions session. You will learn more about additional enhancements not covered in the earlier session, as well as more details on the enhancements that were covered. These enhancements will increase productivity and enhance performance.

Smart 3D IntegrationVivek Mokashi and Jeff Bashir, Intergraph

Smart 3D was designed from the ground up to work well within the ecosystem of various tools and data formats being used on modern complex engineering projects. Whether it is object-based programming interface, industry-standard databases, or support for multiple graphics formats, Smart 3D has strong capabilities to integrate with other tools. This session will focus on three major workflows demonstrating integration functionality delivered out-of-the-box in Smart 3D. These workflows include pipe stress analysis using CAESAR II®, structure/concrete detailing, and brownfield project support through point cloud integration with Leica Cloudworx™.

SmartPlant 3D in production at Technip FranceJean-Luc Hoffert and Thomas Kerjouan, Technip France

As a global EPC contractor, Technip constantly improves its methodology and tools to offer customers better capabilities to execute complex, worldwide EPC projects. A former PDS user, Technip began a SmartPlant 3D conversion in 2006 to meet its plant design needs and requirements. The company chose SmartPlant 3D to take advantage of a multi-discipline plant modelling environment, data-centric approach, global workshare, and real-time interference checking, along with the integration capabilities offered by SmartPlant Enterprise. In this session, Technip will discuss its approach and feedback on using SmartPlant 3D on multiple production projects.

Smart 3D and SmartPlant P&ID IntegrationVivek Mokashi, Intergraph

The combination of Smart 3D with SmartPlant P&ID and SmartPlant Foundation provides unmatched functionality to drive quality and consistency of design, using interactive display of P&IDs inside the Smart 3D modelling environment. Intergraph has added significant new features in 2011 R1 release to further improve correlation of P&IDs with Smart 3D, including topology-based auto-correlation between the 3D model and P&IDs. This provides a step-change in productivity, and the ability to correlate and compare data between two applications. In this session, learn more about these new features, along with a brief overview of SmartPlant P&ID and Smart 3D integration.

Legacy Data and 3D InteroperabilityArnab Biswas and Jeff Bashir, Intergraph

Today’s capital projects are larger and involve more players than those of the past. Even so, they must be completed at lower cost, with fewer errors, and according to a tighter schedule. It is an increasingly complex environment where designers, engineers, and managers must be able to quickly access the 3D data they need to see regardless of the source. This session will provide an overview of the rich array of translation and interoperability tools available for ensuring Smart 3D projects are fully up to the task.

preSenTaTiOn aBSTracTS – Day TwO


12


ENtERpRiSE

Brownfield Design Base Capture and MaintenanceAdrian Park and Ray Howarth, Intergraph

As the cost of laser scanning decreases and the speed of scanning increases, owner operators are increasingly adopting this technology as part of a strategy to capture the design base of brownfield facilities. This session will show how laser scans can be intelligently integrated with the rest of the engineering design base, and how complementary technologies can create structured information from legacy unstructured documentation. Real-world examples where this technology has been adopted will be highlighted in this session. Once the engineering design base has been established, it is important that changes are properly managed to demonstrate compliance for regulatory authorities, and changes to the engineering design base are reflected in associated systems such as CMMS, reliability, and inspection systems. This session will also cover Intergraph’s solutions to support change.

Process Safety and Asset Integrity Management SolutionsAdrian Park and Ray Howarth, Intergraph

Owner operators are increasingly adopting international standards for process safety management (PSM) and asset integrity management (AIM) as a result of demands from regulatory authorities and insurance companies, as well as to ensure safe and sustainable production. This session will show how Intergraph’s solutions can support the implementation of process safety and asset integrity programs. The typical elements in a PSM standard will be analysed against Intergraph’s solutions for the development and maintenance of the engineering design base, and how this can be used as an intelligent platform to support PSM and AIM.

CAPEX and OPEX Project DeliveryAdrian Park, Intergraph

SPO supports the delivery of both greenfield and brownfield projects. This session will introduce a requirements and tracking solution that traces legislative, regulatory authority, corporate, and user requirements, and how these are satisfied on a user’s plant. This session will also cover how SPO solutions help to manage interfaces between project stakeholders, technical queries, non-conformities, and changes. The cost of handover of information and documentation to operations from projects can exceed 1% TIC and take over 12 months from plant start-up. In this session, you will learn how Intergraph’s solutions enable handover and verification of a high-quality engineering design base.

Improving the User Experience: Intergraph’s User Experience and Mobile StrategyRick Standish, Intergraph

“Most people make the mistake of thinking design is what it looks like. People think it’s this veneer – that the designers are handed this box and told, “Make it look good!” That’s not what we think design is. It’s not just what it looks like and feels like. Design is how it works and how people interact with it.” – Steve Jobs Intergraph has made considerable investments in user experience expertise to change our software to align more readily with enterprise work processes. This session will discuss SmartPlant Enterprise’s “user experience” strategy and demonstrate elements of this vision on mobile devices, role-based portals, and turning complex data into streamlined information.

SmartPlant Enterprise: Streamlining Enterprise IntegrationRick Standish, Intergraph

Continuing the themes from the SmartPlant Foundation session, you will learn about the significant new features that Intergraph has added in SmartPlant Enterprise integration, designed to increase productivity and enhance performance. This session will discuss key workflow improvements in SmartPlant P&ID to SmartPlant 3D correlation, data loading, in-tool revisioning, managing to-do lists, and massive performance increases in the management of integrated data. Along with the technology, this session will also cover a new approach to work process documentation, helping you to map SmartPlant Enterprise capabilities to your engineering work processes. The Enterprise Work Processes and Integration Capability Statement documents are available now to ensure successful deployments of SmartPlant Enterprise.


13


iNDuStRy

Intergraph Solutions for the Power Generation IndustryKevin Gribbin, Intergraph

This session will provide an overview of Intergraph Process, Power & Marine’s activities and solutions for conventional and nuclear power-generating plants. You will learn more about the solutions for newbuilds, nuclear decommissioning projects, and configuration and information management systems for generating plant projects and operational plants of all kinds. In this session, learn how Intergraph solutions and consultants can help you to meet current needs and explore new opportunities for your power-related business.

Mining Industry SolutionsTom Szoka, Intergraph

This session will provide an overview of the mining industry globally and how Intergraph is working to solve the problems faced by the industry. One of the major issues that mining companies confront today is cost control. This session will discuss how Intergraph solutions have helped mining companies manage capital costs and operating expenses. You will also see case studies of how mining companies are using SmartPlant Enterprise today to manage costs and to operate more efficiently. An important design tool for the mining industry is SmartPlant 3D Materials Handling Edition, built on Intergraph’s proven 3D technology. It provides the bulk materials handling sector with the opportunity to access all the capabilities already created for other industries using Smart 3D solutions. SmartPlant 3D Materials Handling Edition delivers the benefits of automation, design re-use, and standardisation to greatly reduce the time involved for design, procurement, and construction of projects. Increased quality, safety, and accuracy also help to reduce costs and enhance the safety of the plant. In this session, learn how SmartPlant 3D Materials Handling Edition meets key business challenges for the bulk materials handling sector, and see demonstrations of new functionality provided in the latest release, such as conveyor layout of curved gantries.

CAESAR II, PV Elite & TANK: Improving Engineering Collaboration for SmartPlant EnterprisePaulo Moncores, Intergraph

For 23 years, Intergraph CADWorx® & Analysis Solutions have given thousands of engineers worldwide the ability to quickly, accurately, and reliably evaluate and analyse piping systems, tall towers, horizontal vessels, and heat exchangers. Collaborative information sharing is the foundation upon which our vision of concurrent engineering and design is built. By allowing engineering and design to work together seamlessly, departments achieve tighter integration, resulting in seamless information transfer, transparent revisions, and a drastic reduction in errors, which saves time and money. In this session, you will not only learn how effective this collaboration can be, but also how easily such processes can be put in place. You will also learn more about the latest developments in CAESAR II, PV Elite®, and TANK™, and how these developments can improve your business processes and how these solutions interface with SmartPlant Enterprise.

CADWorx fieldPipe: Capturing Existing Facilities to Create Intelligent DeliverablesWilliam Rasco, Intergraph

This session will demonstrate how you can improve onsite asset acquisition with the use of Leica Total Stations and HDS scanners to develop point cloud data for brownfield projects and the creation of precise site deliverables. Common workflow examples will be employed to demonstrate how you can boost productivity through improved workflow and the automated production of deliverables.


Gain a competitive edge and accelerate projects with the latest release of Intergraph®

SmartPlant®

and power industries. SmartPlant 3D delivers at least 30 percent more productivity than any other system available today.

SmartPlant 3D now offers powerful rules and relationships that automate repetitive tasks,

from enhanced support for mega-projects thanks to global worksharing, model data reuse, and safety-centric rules.

To see demonstrations, case studies, webinars, and more, visit www.intergraph.com/go/smartplant3d.

BOOST PRODUCTIVITY BY 30 PERCENTSmartPlant® 3D

Intergraph, the Intergraph logo, and SmartPlant are registered trademarks of Intergraph Corp. or its subsidiaries in the United States and in other countries.


15

SpOnSOrS

CAXpertsIntergraph 2012 Asia-Pacific Sponsor

CAXperts develops standardised and customised software solutions, and is well-known for its professional consulting services. These span from business analysis to system architecture, system implementation (including integrations and customisations) to system hosting, and content management to project support services. All the activities are built on Intergraph’s SmartPlant and PDS products. The specialty of CAXperts is the development of useable, workflow-oriented, and efficient IT solutions for increased productivity. The expertise of CAXperts has been proven in innumerable projects around the world. The company has offices in Germany and Singapore, with sales agents in Canada and India. Visit: www.caxperts.com

ARES Software CorporationIntergraph 2012 Asia-Pacific Sponsor

ARES Software, a subsidiary of ARES Holding Company, is a world-class provider of integrated project management solutions. Organisations in more than 50 countries rely on PRISM to manage the engineering and construction of capital projects, enabling them to lower cost, mitigate risk, and improve project performance. Our customers include four of the five top defence agencies, eight of the top 10 mining companies, and countless energy, oil and gas, aerospace, and engineering and construction firms from around the world. With more than 95% repeat business each year, ARES is a results-oriented business partner with a drive towards 100% customer satisfaction. Visit: www.arescorporation.com/prism

TeklaIntergraph 2012 Southeast Asia Sponsor

With its software, Tekla Corporation drives the evolution of digital information models, thus providing more and more competitive advantage to the construction and infrastructure industries. Tekla has customers in nearly 100 countries, offices in 145 countries, and a worldwide partner network. The company was established in 1966, with Tekla Corporation becoming a part of Trimble in 2011. With an ambition to multiply its customers’ potential to think and achieve big, Tekla provides an accurate, detailed, and data-rich 3D BIM (Building Information Modelling) software environment that can be shared by contractors, structural engineers, steel detailers and fabricators, as well as concrete detailers and manufacturers. The highly detailed as-built structural models created, combined, and distributed with Tekla Structures enable the highest level of constructability and production control. Centralising building information into the model allows for more collaborative and integrated project management and delivery. This translates into increased productivity and elimination of waste, making construction and buildings more sustainable. Visit: www.tekla.com and www.teklastructures.com

INTERGRAPH 2012 SOUTHEAST ASIA

Documents

CONFERENCE AGENDA - Intergraph · p& iD ntegration Vivek Mokashi, Intergraph impr u intergraph’ u E m S Rick Standish, Intergraph 1200 L D C 3D interoperability E Arnab Biswas and