Construction Standards · 2020. 1. 21. · 69tv1 69tv1.1 1 horiz gb 69kv poly post insul. 3 0 4063000 2 horiz gb 69kv porc. post insul. 0 3 4062500 3 xxx mach bolt - 12 x 5/8 1 1

Construction Standards

and Material Specifications

SECTION 100

GENERAL INFORMATION

1. Purpose of Construction Standards The purpose of Public Utility District No. 1 of Clallam County Construction Standards is to promote safe, economical, and uniform practices in the design, construction, and maintenance of the Districts’ electrical systems. The Construction Standards have been incorporated into CAN Map’s Fusion work-order management/GIS system and provides a common interface between Engineering, Accounting, Warehousing, and Operations. 2. Scope of Construction Standards The Districts’ Standards provide information applicable to the design and construction of the Districts’ transmission and distribution systems. Standards are intended to cover the majority of typical installations. They do not cover every possible situations or “one of a kind” installations. The lack of a Standard should not pose a problem if good engineering judgment and construction practices are followed. 3. Electrical Codes All design and construction practices shall meet the provisions of the Washington State Electrical Construction Codes and the National Electric Safety Codes in so far as they are applicable. Nothing in these Standards is intended to be interpreted so as to conflict with regulations of the State of Washington or any other regulatory bodies having jurisdiction. 4. Use of Standards

• Standards shall be adhered to for “new construction.” • Standards shall be complied with on rebuilding or maintenance. When

such practices are impractical, or not economically feasible, changes or additions to the standard practices will be permissible.

• It is not the intent of Standardization to impede on progress in adopting new ideas in materials, methods and/or designs.

davidt

Highlight

5. Deviation from Standards While it is desirable that Standards be adhered to as much as possible, it is also recognized that items of material and methods of assembly and construction may become obsolete because of price change, vendor changes and/or new materials. New and/or better methods of performing the work are constantly being derived. When deviations from Districts’ Standards are deemed necessary, the individual responsible for the deviation shall do so with approval of their supervisor. The Standards Committee will review and evaluate such changes and upgrade the Standard as necessary. Employees are urged to submit suggestions for improvements, so that the Districts’ Standards can be continuously updated to take advantage of new and improved materials and methods. Construction Standards-“Request for Change” form will be available to make it easy to submit suggestions stating the reasons for the proposed change. (See Section 100.) The form should be submitted to the Standards Committee for review. The Standards Committee shall review all suggestions and provide a response to the individual originally providing the suggestions in a timely matter. 6. Construction Standards Books Constructions Standards Books will be issued to individuals within each department directly in charge of the work. Updated editions will be issued periodically. The layout of the Standards Book is flexible. Users are encouraged to submit ideas so as to improve the book layout and content, making it easier and more efficient to use.

FILE: H:\ENGSTANDARDS\05 SPECBOOK\110-INTRO\REQUEST FOR CHANGE

PG

OF

REV:

DRAWN:

CHK:

DATE:

110

08/20/04

11/17/05

JK/DT

RA/DP

1

1

CONSTRUCTION STANDARDS:

CHANGE REQUEST FORM

CONSTRUCTION STANDARDS- REQUEST FOR CORRECTIONS AND CHANGES

DATE:

FROM:

REFERENCED TO: DRAWING / ASSEMBLY #

- FOR GENERAL CORRECTIONS TO MATERIALS LIST, MATERIAL COUNTS AND/OR DIMENSIONING CHANGES PLEASE SUBMIT A COPY OF THE ASSEMBLY DRAWING NOTING ERRORS AND CHANGES

THAT NEED TO BE MADE.

- FOR ALL CONSTRUCTION PRACTICES AND/OR MATERIAL CHANGES TO BE REVIEWED BY THE

STANDARDS COMMITTEE PLEASE COMPLETE THE FOLLOWING:

STATEMENT OF PROBLEM:

SUGGESTION / SOLUTION:

ACTION TAKEN:

DATE OF ACTION: DATE ORIGINATOR NOTIFIED OF ACTION: NOTIFIED BY:

STANDARDS COMMITTEE AND/OR DEPARTMENT SUPERVISOR

COMMENTS:

TABLE OF CONTENTS PAGE 1 OF 3

100. GENERAL

100-CONSTRUCTION STANDARDS - GENERAL INFORMATION 110 -STANDARDS CORRECTION AND CHANGES FORM

200. TRANSMISSION (69KV-115KV)

210- 69KV TRANSMISSION ASSEMBLY 220- 115KV TRANSMISSION ASSEMBLY

300. OVERHEAD DISTRIBUTION (15KV-25KV)

310-PRIMARY SINGLE PHASE ASSEMBLY 320-PRIMARY VEE PHASE ASSEMBLY 330-PRIMARY THREE PHASE ASSEMBLY 360-SECONDARY ASSEMBLY

400. UNDERGROUND DISTRIBUTION (15KV-25KV)

410-HILL HOLDER 420-PADMOUNT TRANSFORMER ASSEMBLY – See 800 for Transformers 430-JUNCTION (PADMOUNT & VAULTS) ASSEMBLY 440-SWITCHGEAR CABINETS & VAULTS 450-FUSE CABINETS, PADMOUNTS & VAULTS 460-UG BASIC UNITS - VAULT MISCELLANEOUS 470-UG BASIC UNITS - FEEDTHRU, ELBOWS, AND TERMINATIONS 480-UG BASIC UNITS - CONDUIT, SWEEPS, AND FITTINGS 490-SECONDARY DISTRIBUTION (PEDESTAL)

500. OVERHEAD TO UNDERGROUND

510 - RISER POLE ASSEMBLY 520 – BASIC UNITS - CONDUIT RISERS & RISER PARTS 530 – BASIC UNITS - TERMINATION 540 – TERMINATION ASSEMBLY 550 – SUBSTATION RISER POLE

600. GUYS AND ANCHORS

610 - PRIMARY DOWN GUY ASSEMBLY 620 - PRIMARY SPAN GUY ASSEMBLY 630 – SIDEWALK GUY ASSEMBLY 640 – BASIC UNITS - ANCHORS 650 – BASIC UNITS - POLE ATTACHEMENT & HARDWARE 660 - BASIC UNITS - GUY WIRE & GUY MARKERS

TABLE OF CONTENTS PAGE 2 OF 3

700. GROUNDING

710 - OVERHEAD DISTRIBUTION 720 - UNDERGROUND DISTRIBUTION 730 - SWITCHING – OPERATOR GROUND MATS 740 - VAULTS AND SPECIAL APPLICATIONS

800. TRANSFORMERS AND FUSING

800- TRANSFORMERS DESIGNATION – SET CODES 810- OVERHEAD TRANSFORMERS AND BUGLEGS CONNECTIONS 820- PADMOUNT TRANSFORMERS 830- FUSING SELECTION & SETCODES

900. CUT-OUT, ARRESTERS & BRACKETS

910- BASIC UNITS - CUT-OUT, ARRESTERS 920- CUT-OUT & TERMINATION BRACKETS 930- CUT-OUT & JUMPER ASSEMBLY

1000. BASIC UNITS, CHARTS & TABLES

1000.CL – CLAMPS (Hotline, Stirrup, Post-insulator, Suspension, Swing) 1000.CN – CONNECTORS (Ampact, Crimpets, WideRange) 1000.DE – DEADENDS (Auto, Bolted, Compression, Slackspan) 1000.IN – INSULATORS 1000.LT – LIGHTS (Street & Yard) 1000.ML – MULTILUGS (Threaded, Studded, Bolted) 1000.PL – POLES, STUBS, REINFORCERS 1000-TY – TIE CHARTS (Preformed, Armor Rod, Hand Ties)

1100. SYSTEM CONTROL UNITS & LINE DEVICES

1110- CAPACITORS 1120 - RECLOSERS 1130 – REGULATORS 1140 – SECTIONALIZERS 1150 - SWITCHES

1200. CONDUCTOR, JUMPERS, CONNECTOR, SPLICES

1200- CONDUCTOR & JUMPERS 1210 - CONNECTORS 1220 – SPLICES 1230 – SPAN GUARDS – (Aircraft Warning Beacons and Lights)

1300 – 1900. “Sections Void at this time”

TABLE OF CONTENTS PAGE 3 OF 3 2000. INSTALLATION SPECIFICATIONS TABLE OF CONTENTS SECTION 1 – GENERAL SECTION 2 - TRANSMISSION SECTION 3 - PRIMARY OVERHEAD SECTION 4 – PRIMARY UNDERGROUND SECTION 5 – TRENCHING SECTION 6 – VAULT INSTALLATION SECTION 7 – GUYING AND ANCHORING SECTION 8 – GROUNDING SECTION 9 – LABELING SECTION 10 – SPECIFICATION DRAWINGS

69TV1 69TV1.11 HORIZ GB 69KV POLY POST INSUL. 3 0 40630002 HORIZ GB 69KV PORC. POST INSUL. 0 3 40625003 xxx MACH BOLT - 12 x 5/8 1 1 30312004 xxx MACH BOLT - 14 x 3/4 6 6 30414005 xxx WASHER - SQ - 2 1/4 2 2 32920006 xxx WASHER - SQ CURV - 3" 6 6 33039007 xxx WASHER - DBL COIL LOCK - 5/8 1 1 33309008 xxx WASHER - DBL COIL LOCK - 3/4 6 6 33310009 POST INSUL CLAMP (SEE 1000.CL) 3 3 AS REQ'D10 xxx ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69TV2 69TV2.11 HORIZ GB 69KV PORC POST INSUL 2 40625002 HORIZ GB 69KV POLY POST INSUL 2 40630003 VERT 69KV PORC POST INSUL- 1 40636004 VERT 69KV POLY POST INSUL- 1 40632005 POLE TOP BRACKET 69KV 1 1 45340006 xxx MACH BOLT - 12 x 5/8 1 1 30312007 xxx MACH BOLT - 14 x 3/4 6 6 30414008 xxx WASH - SQ 2 1/4" 2 2 32920009 xxx WASH - SQ CURV 3" 6 6 330390010 xxx WASH - DBL COIL LOCK - 5/8 1 1 333090011 xxx WASH - DBL COIL LOCK - 3/4 6 6 333100012 xxx POST INUL CLAMP (SEE 1000.CL) 3 3 AS REQ'D13 xxx POST INSUL STUD 1 1 453410014 xxx ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69TV3 69TV3.11A VERTICAL 69KV POLY 1-BOLT INSUL 1 0 40632001B VERTICAL POST 69KV PORC INSUL 0 1 40636002A HORIZ GB 115KV POLY POST INSUL 2 0 40660002B HORIZ GB 115KV PORC. POST INSUL 0 2 40640003 POLE TOP BRACKET 69KV 1 1 45340004 xxx MACH BOLT - 5/8 x 12" 1 1 30312005 xxx MACH BOLT - 3/4 x 14" 2 2 30414006 xxx WASH - SQ FLAT -2-1/4" 6 6 32920007 xxx WASH - SQ CURV - 3" 2 2 33039008 xxx ROUND WASHER - 3/4" 4 4 32812009 xxx WASH - DBL COIL LOCK - 5/8" 1 1 3330900

10 xxx WASH - DBL COIL LOCK - 3/4" 2 2 333100011 xxx BOLT DA - 24" x 3/4" 2 2 309240012 xxx SHORT 69kv POST INSUL STUD 1 1 453410013 xxx POST INSUL CLAMP (SEE 1000.CL) 3 3 AS REQ'D14 xxx TIE PROCEDURES (SEE 1000.TY) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69TV4 69TV4.11A HORIZ GB 69KV POLY POST INSUL 1 0 40630001B HORIZ GB 69KV PORC POST INSUL 0 1 40625002A HORIZ GB 115KV POLY POST INSUL 2 0 40660002B HORIZ GB 115KV PORC. POST INSUL 0 2 40640003 xxx BOLT DA - 24" x 3/4" 2 2 30924004 xxx MACH BOLT - 5/8 x 12" 1 1 30312005 xxx MACH BOLT - 3/4 x 14" 2 2 30414006 xxx WASH - SQ FLAT -2-1/4" 6 6 32920007 xxx WASH - SQ CURV - 3" 2 2 33039008 xxx ROUND WASHER - 3/4" 4 4 32812009 xxx WASH - DBL COIL LOCK - 5/8" 1 1 3330900

10 xxx WASH - DBL COIL LOCK - 3/4" 2 2 333100011 POST INSUL CLAMP (SEE 1000.CL) 3 3 AS REQ'D12 TIE PROCEDURES (SEE 1000.TY) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69TV6 69TV6.11 SUSPENSION 69KV POLY INSUL 3 3 40638002 SWING ANGLE BRKT w / CLIPS 0 3 33820003 xxx MACH BOLT - 12x5/8" 1 1 30314004 xxx MACH BOLT - 14x3/4" 3 6 30414005 xxx WASH - SQ FLAT -2-1/4" 2 2 32920006 xxx WASH - SQ CURV -4 x 13/16" 3 6 33060007 xxx D-EYE 3 0 39901008 xxx WASH - DBL COIL LOCK - 5/8 1 1 33309009 xxx WASH - DBL COIL LOCK - 3/4" 3 6 3331000

10 SUSPENSION CLAMP (SEE 1000.CL) 3 3 AS REQ'D11 xxx ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69TV6.2 69TV6.31 SUSPENSION INSULATOR BELL 10" 20K 15 15 40210002 SWING ANGLE BRKT w / CLIPS 0 3 33820003 xxx MACH BOLT - 12x5/8" 1 1 30314004 xxx MACH BOLT - 14x3/4" 3 6 30414005 xxx WASH - SQ FLAT -2-1/4" 2 2 32920006 xxx WASH - SQ CURV -4 x 13/16" 3 6 33060007 xxx D-EYE 3 0 39901008 xxx WASH - DBL COIL LOCK - 5/8 1 1 33309009 xxx WASH - DBL COIL LOCK - 3/4" 3 6 3331000

10 xxx SOCKET EYE 3 3 495250011 xxx BALL HOOK 3 3 495350012 SUSPENSION CLAMP (SEE 1000.CL) 3 3 AS REQ'D13 xxx ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69TH2 69TH2.11 CROSSARM 24'-9" FIBERGLASS 1 1 10824002 BRACKET FIBER XARM TANG 2 2 10854003 SUSPENSION 69kv POLY INSUL 3 3 40638004 xxx MACH BOLT - 10 x 3/4" 4 4 30410005 xxx MACH BOLT - 12 x 3/4" 3 5 30412006 xxx MACH BOLT - 14 x 3/4" 6 6 30414007 xxx WASH - SQ FLAT 4" x 13/16" 3 5 32960008 xxx WASH - SQ CURV 4"x 13/16" 6 6 33060009 xxx D EYE 3 1 3990100

10 xxx WASH - DBL COIL LOCK - 3/4" 13 15 333100011 SWING ANGLE BRACKET W/ CLIPS 0 2 338200012 xxx TIE-ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D13 SUSPENSION CLAMP (SEE 1000.CL) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69TH2.2 69TH2.31 CROSSARM 24'-9" FIBERGLASS 1 1 10824002 BRACKET FIBER XARM TANG 2 2 10854003 SUSPENSION INSULATOR BELL 10" 20K 3 3 40210004 xxx MACH BOLT - 10 x 3/4" 4 4 30410005 xxx MACH BOLT - 12 x 3/4" 3 5 30412006 xxx MACH BOLT - 14 x 3/4" 6 6 30414007 xxx WASH - SQ FLAT - 4" x 13/16" 3 5 32960008 xxx WASH - SQ CURV - 4" x 13/16" 6 6 33060009 xxx D EYE 3 1 399010010 xxx WASH - DBL COIL LOCK - 3/4" 13 15 333100011 SWING ANGLE BRACKET W/ CLIPS 0 2 338200012 xxx SOCKET EYE 3 3 495250013 xxx BALL HOOK 3 3 495350014 xxx TIE - ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D15 SUSPENSION CLAMP (SEE 1000.CL) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69DV1 69DV1.11 SUSPENSION 69KV POLY INSUL 3 0 4063800

2 SUSPENSION INSULATOR 10" 0 15 4021000

3 xxx MACH BOLT - 12 x 5/8 1 1 3031200

4 xxx MACH BOLT - 14 x 3/4 6 6 3041400

5 xxx WASH - SQ FLAT -2-1/4" 2 2 3292000

6 xxx WASH - SQ CURV - 4" x 13/16" 6 6 3306000

7 xxx WASH - DBL COIL LOCK - 5/8" 1 1 3330900


9 xxx D-EYE - 5/8" 3 3 3990100

10 DEADEND (SEE 1000.DE) 3 3 AS REQ'D

11 xxx SOCKET EYE 0 3 4952500

12 xxx BALL HOOK 0 3 4953500

STOCK#QUANTITY

ITEM DESCRIPTION

69DV2-A1 xxx WASHER SQ. CURV 4" x 13/16" 12 3306000

2 xxx BOLT MACH 14" x 3/4" 6 3041400

3 xxx BOLT MACH 18" X 3/4" 6 3041800

4 xxx D-EYE 6 3990100

5 xxx EYE NUT 6 3232000

6 xxx WASHER DBL COIL LOCK 3/4" 12 3331000

7 SUSPENSION INSULATOR POLY 69KV 6 4063800

8 xxx WASHER SQ CURVE 3" x 13/16" 6 3303900

9 HORIZ GB 69KV POLY POST INSUL 3 4063000

10 xxx POST INSUL CLAMP (SEE 1000.CL) 3 AS REQ'D

11 JUMPER (SEE 1000.CJ) 3 AS REQ'D

12 xxx CONNECTOR - AMPACT (SEE 1000.CN) 6 AS REQ'D

13 DEADEND (SEE 1000.DE) 6 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69DV2-A.11 xxx WASHER SQ. CURV 4" x 13/16" 9 3306000

2 xxx BOLT MACH 14"x3/4" 9 3041400

3 xxx D-EYE 3 3990100

4 xxx EYENUT 3/4" 3 3232000


6 xxx BALL HOOK 6 4953500

7 SUSPENSION INSULATOR 10" 30 4021000

8 xxx SOCKET EYE 6 4952500


10 HORIZ GB 69KV PORC POST INSUL 3 4062500

11 POST INSUL CLAMP (SEE 1000.CL) 3 AS REQ'D



14 xxx WASHER ROUND 3/4" 6 3281200

STOCK#QUANTITY

ITEM DESCRIPTION

69DV2-B1 xxx WASHER SQ. CURV 4" x 13/16" 12 3306000

2 xxx BOLT MACH 14" x 3/4" 6 3041400

3 xxx BOLT MACH 18" X 3/4" 6 3041800

4 xxx D-EYE 6 3990100

5 xxx EYE NUT 6 3232000


7 SUSPENSION INSULATOR POLY 69KV 6 4063800


9 HORIZ GB 69KV POLY POST INSUL 3 4063000





STOCK#QUANTITY

ITEM DESCRIPTION

69DV2-B.11 xxx WASHER SQ. CURV 4" x 13/16" 6 3306000

2 xxx BOLT MACH 14" x 3/4" 12 3041400

3 xxx D-EYE 6 3990100

4 xxx WASHER ROUND 3/4" 12 3281200



7 SUSPENSION INSULATOR 10" 30 4021000








STOCK#QUANTITY

ITEM DESCRIPTION

QUANTITY

69DV2-C1 SUSPENSION INSULATOR POLY 69KV 6 4063800

2 xxx EYE NUT 3/4" 6 3232000

3 xxx MACH BOLT - 14" X 3/4" 6 3041400

4 xxx WASH - SQ CURV - 4" X 13/16" 6 3306000

5 xxx D-EYE - 5/8" 6 3990100




STOCK#ITEM DESCRIPTION

69DV2-C.11 xxx WASHER SQ. CURV 4" x 13/16" 6 3306000

2 xxx BOLT MACH 14"x3/4" 6 3041400

3 xxx D-EYE 6 3990100



6 SUSPENSION INSULATOR 10" 20K 30 4021000





STOCK#QUANTITY

ITEM DESCRIPTION

69DV31 xxx WASHER SQ. CURV 3" x 13/16" 9 33039002 xxx BOLT MACH 14"x3/4" 9 30414003 xxx D-EYE 9 39901004 xxx WASHER DBL COIL LOCK 3/4" 9 33310005 xxx BALL HOOK 9 49535006 SUSPENSION INSULATOR 10" 45 40210007 xxx SOCKET EYE 9 49525008 JUMPER (SEE 1000.CJ) 3 AS REQ'D9 xxx CONNECTOR - AMPACT (SEE 1000.CN) 12 AS REQ'D10 DEADEND (SEE 1000.DE) 9 AS REQ'D

STOCK#QUANTITY

x DESCRIPTION

69DX11 FIBERGLASS 10' ASSEMBLY 1 1095010

2 POST INSUL-HORIZ GB 115KV POLY 2 4064000

3 POST INSUL-VERT 69KV POLY 1 4063200

4 SUSP INSULATOR -69KV POLY 6 4063800

5 POLE TOP BRACKET 69KV 1 4534000

6 xxx SHORT 69 POST INSUL. STUD 1 4534100

7 xxx MACH BOLT - 12x5/8 1 3031200

8 xxx MACH BOLT - 14x3/4 5 3041400

9 xxx D EYE 1 3990100

10 xxx DA BOLT - 24x3/4 2 3092400

11 xxx NUT EYE 2 3232000

12 xxx WASHER - ROUND GALV. - 3/4" 4 3281200

13 xxx WASHER - SQ 2 1/4" 6 3292000

14 xxx WASHER - SQ CURV 3" 6 3303900

15 xxx WASHER - DBL COIL LOCK - 5/8 1 3330900



18 CLAMP (SEE 1000.CL) 3 AS REQ'D

19 CONNECTOR (SEE 1000.CN) 6 AS REQ'D

20 DEADEND-BOLTED TYPE (SEE 1000.DE) 6 AS REQ'D

STOCK#QNTY

ITEM DESCRIPTION

69DX1.11 FIBERGLASS 10' ASSEMBLY 1 1095010


3 VERTICAL POST 69KV PORC INSUL 1 4063600

4 SUSPENSION INSUL 10" 20K 30 4021000

5 POLE TOP BRACKET 69KV 1 4534000

6 xxx SHORT 69 POST INSUL. STUD 1 4534100

7 xxx MACH BOLT - 12x5/8 1 3031200

8 xxx MACH BOLT - 14x3/4 5 3041400

9 xxx D EYE 1 3990100

10 xxx DA BOLT - 24x3/4 2 3092400

11 xxx NUT EYE 2 3232000


13 xxx WASHER - SQ 2 1/4" 6 3292000






19 CONNECTOR (SEE 1000.CN) 6 AS REQ'D

20 DEADEND-BOLTED TYPE (SEE 1000.DE) 6 AS REQ'D

STOCK#QNTY

ITEM DESCRIPTION

69DH2 69DDH21 CROSSARM 24'-9" FIBERGLASS 1 1 10824002 BRACKET FIBER XARM DE 2 2 10834003 xxx MACH BOLT - 8 x 3/4" 4 4 30408004 xxx MACH BOLT - 10 x 3/4" 4 4 30410005 xxx MACH BOLT - 12 x 3/4" 3 3 30412006 xxx MACH BOLT - 14 x 3/4" 6 6 30414007 xxx WASH - SQ FLAT - 4" x 13/16" 6 6 32960008 xxx WASH - SQ CURV -4" x 13/16" 6 6 33060009 xxx D EYE 3 3 3990100

10 xxx EYENUT - 3/4" 0 3 323200011 xxx WASH - DBL COIL LOCK - 3/4" 13 13 333100012 SUSPENSION 69kv POLY INSUL 3 6 406380013 DEADEND (SEE 1000.DE) 3 6 AS REQ'D14 JUMPER (SEE 1200.CJ) 0 3 AS REQ'D15 xxx AMPACT CONNECTOR (SEE 1000.CN) 0 6 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

69DH2.2 69DDH2.21 CROSSARM 24'-9" FIBERGLASS 1 1 10824002 BRACKET FIBER XARM DE 2 2 10834003 xxx MACH BOLT - 8 x 3/4" 4 4 30408004 xxx MACH BOLT - 10 x 3/4" 4 4 30410005 xxx MACH BOLT - 12 x 3/4" 3 3 30412006 xxx MACH BOLT - 14 x 3/4" 6 6 30414007 xxx WASH - SQ FLAT - 4" x 13/16" 6 6 32960008 xxx WASH - SQ CURV -4" x 13/16" 6 6 33060009 xxx D EYE 3 3 3990100

10 xxx EYENUT - 3/4" 0 3 323200011 xxx WASH - DBL COIL LOCK - 3/4" 13 13 333100012 SUSPENSION INSUL 10" 20K 15 30 402100013 xxx SOCKET EYE 3 6 495250014 xxx BALL HOOK 3 6 495350015 DEADEND (SEE 1000.DE) 3 6 AS REQ'D16 JUMPER (SEE 1200.CJ) 0 3 AS REQ'D17 xxx AMPACT CONNECT (SEE 1000.CN) 0 6 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

POLY. PORC.115TV1 115TV1.1

1 HORIZ GB 115KV POLY POST INSUL- 3 0 40660002 HORIZ GB 115KV PORC POST INSUL 0 3 40640003 xxx MACH BOLT - 12 x 5/8 1 1 30312004 xxx MACH BOLT - 18 x 3/4 6 6 30418005 xxx WASH - ROUND - 3/4" 6 6 32812006 xxx WASH - SQ CURV - 2 1/4" 2 2 32920007 xxx WASH - SQ CURV - 3" x 13/16" 6 6 33039008 xxx WASH - DBL COIL LOCK - 5/8 1 1 33309009 xxx WASH - DBL COIL LOCK - 3/4 6 6 333100010 xxx POST INSUL CLAMP (SEE 1000.CL) 3 3 AS REQ'D11 xxx TIE ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D

STOCK #ITEM DESCRIPTION

4-BOLT 1-BOLT115TV2 115TV2.1

1 POST INSUL - VERT 115KV POLY 4-BOLT 1 0 40680002 POST INSUL - VERT 115KV POLY 1-BOLT 0 1 40670003 POST INSUL - HORZ GB 115KV POLY 2 2 40660004 POLE TOP BRACKET - 115KV 4-BOLT 1 0 45339005 POLE TOP BRACKET - 69KV STUD 0 1 45340006 xxx MACH BOLT - 2-1/2" X 5/8" ? 4 0 30302007 xxx WASH - ROUND - 5/8" 4 0 32810008 xxx WASH - DBL COIL LOCK - 5/8" 5 1 33309009 xxx MACH BOLT - 14" X 3/4" 6 6 304140010 xxx WASH - ROUND - 3/4" 6 6 328120011 xxx WASH - DBL COIL LOCK - 3/4" 6 6 333100012 xxx WASH - SQ CURV - 4" 6 6 330600013 xxx SHORT 115KV VERT POST STUD 0 1 453450014 xxx POST INSUL CLAMP (SEE 1000.CL) 3 3 AS REQ'D15 xxx ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D16* xxx MACH BOLT - 10" X 5/8" 1 1 303100017* xxx WASH - SQ 2-1/4" 1 1 3292000

ITEM DESCRIPTION STOCK#

* = FOR WOOD POLE CONSTRUCTION ONLY

1 BOLT115TV2.2

1 VERT POST 115KV PORC INSUL 1 40650002 POLE TOP BRACKET FOR 1-BOLT 1 45340003 HORIZ GB 115KV PORC POST INSUL 2 40640004 xxx MACH BOLT - 12 x 5/8 1 30312005 xxx MACH BOLT - 14 x 3/4 6 30414006 xxx WASH - SQ 2 1/4" 2 32920007 xxx WASH - ROUND - 3/4" 4 32812008 xxx WASH - SQ CURV 3" 6 33039009 xxx WASH - DBL COIL LOCK - 5/8 1 333090010 xxx WASH - DBL COIL LOCK - 3/4 6 333100011 xxx POST INSUL STUD 1 453450012 xxx POST INUL CLAMP (SEE 1000.CL) 3 AS REQ'D13 xxx ARMOR ROD (SEE 1000.TY) 3 AS REQ'D


4-BOLT 1-BOLT115TV3 115TV3.1

1 POST INSUL-VERT 115KV POLY 4 BOLT 1 0 40680002 POST INSUL-VERT 115KV POLY 1 BOLT 0 1 40670003 POST INSUL-HORIZ GB 115KV POLY 2 2 40660004 POLE TOP BRACKET 115KV 4 BOLT 1 0 45339005 POLE TOP BRACKET 69KV STUD 0 1 45340006 xxx MACH BOLT - 2-1/2" X 5/8" 4 0 30302007 xxx WASH - ROUND - 5/8" 5 0 32810008 xxx WASH - DBL COIL LOCK - 5/8" 5 1 33309009 xxx MACH BOLT - 14 x 3/4 2 2 304140010 xxx ROUND WASHER - 3/4" 6 6 328120011 xxx WASH - DBL COIL LOCK - 3/4" 10 10 333100012 xxx WASH - SQ CURV - 4" 6 6 330600013 xxx BOLT DA - 20" x 3/4" 2 2 309200014 xxx POST 115kv INSUL STUD 0 1 453450015 xxx POST INSUL CLAMP (SEE 1000.CL) 3 3 AS REQ'D16 xxx ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D17* xxx MACH BOLT - 12" x 5/8" 1 1 303120018* xxx WASH - SQ CURV. 2-1/4" 2 2 3292000

ITEM DESCRIPTION STOCK #

*= FOR WOOD POLE CONSTRUCTION ONLY

QNTY115TV3.2

1 VERT POST 115KV PORC INSUL 1 40650002 POLE TOP BRACKET FOR 1 BOLT INSUL 1 45340003 HORIZ GB 115KV PORC POST INSUL 2 40640004 xxx MACH BOLT - 14 x 5/8 1 30314009 xxx MACH BOLT - 14 x 3/4 2 304140010 xxx WASH - SQUARE - 3" 1 329400011 xxx WASH - SQ CURV - 3" 4 330390012 xxx ROUND WASHER - 3/4" 4 328120013 xxx WASH - DBL COIL LOCK - 3/4" 9 333100015 xxx BOLT DA - 28 x 3/4 2 309280016 xxx POST 115kv INSUL STUD 1 453450018 xxx WASH - DBL COIL LOCK - 5/8" 1 333090019 xxx WASH - SQ. 2-1/4" 2 329200014 xxx POST INSUL CLAMP (SEE 1000.CL) 3 AS REQ'D17 xxx TIE - ARMOR ROD (SEE 1000.TY) 3 AS REQ'D


115TV4 115TV4.11A HORIZ GB 115KV POLY POST INSUL 3 0 4066000

1B HORIZ GB 115KV PORC. POST INSUL 0 3 4064000

2 xxx BOLT DA - 24" x 3/4" 2 2 3092400

3 xxx MACH BOLT - 5/8 x 12" 1 1 3031200

4 xxx MACH BOLT - 3/4 x 14" 2 2 3041400

5 xxx WASH - SQ FLAT -2-1/4" 6 6 3292000

6 xxx WASH - SQ CURV - 3" 2 2 3303900

7 xxx ROUND WASHER - 3/4" 4 4 3281200



10 POST INSUL CLAMP (SEE 1000.CL) 3 3 AS REQ'D

11 TIE PROCEDURES (SEE 1000.TY) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

115TV6 115TV6.21a SUSPENSION INSUL 115KV POLY 3 0 40700001b SUSPENSION INSULATOR BELL 10" 20K 0 27 40210002 xxx MACH BOLT - 12 x 5/8 1 1 30312003 xxx MACH BOLT - 14 x 3/4 3 3 30414004 xxx WASH - SQ - 2 1/4 2 2 32920005 xxx WASH - SQ CURV - 4" x 13/16" 3 3 33060006 xxx D-EYE - 5/8 3 3 39901007 xxx WASH - DBL COIL LOCK - 5/8 1 1 33309008 xxx WASH - DBL COIL LOCK - 3/4 3 3 33310009 xxx SOCKET EYE 0 3 495250010 xxx BALL HOOK 0 3 495350011 xxx POST INSUL CLAMP (SEE 1000.CL) 3 3 AS REQ'D12 xxx ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D

STOCK #QUANTITY

ITEM DESCRIPTION

115TH2 115TH2.11 CROSSARM 24'-9" FIBERGLASS 1 1 10824002 BRACKET FIBER XARM TANG 2 2 10854003 SUSPENSION 115kv POLY INSUL 3 3 40700004 xxx MACH BOLT - 10 x 3/4" 4 4 30410005 xxx MACH BOLT - 12 x 3/4" 3 5 30412006 xxx MACH BOLT - 14 x 3/4" 6 6 30414007 xxx WASH - SQ FLAT 4" x 13/16" 3 5 32960008 xxx WASH - SQ CURV 4"x 13/16" 6 6 33060009 xxx D EYE 3 1 399010010 xxx WASH - DBL COIL LOCK - 3/4" 13 15 333100011 SWING ANGLE BRACKET W/ CLIPS 0 2 338200012 XXX TIE-ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D13 SUSPENSION CLAMP (SEE 1000.CL) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

115TH2.2 115TH2.31 CROSSARM 24'-9" FIBERGLASS 1 1 10824002 BRACKET FIBER XARM TANG 2 2 10854003 SUSPENSION INSUL 10" 27 27 40210004 xxx MACH BOLT - 10 x 3/4" 4 4 30410005 xxx MACH BOLT - 12 x 3/4" 3 5 30412006 xxx MACH BOLT - 14 x 3/4" 6 6 30414007 xxx WASH - SQ FLAT 4" x 13/16" 3 5 32960008 xxx WASH - SQ CURV 4"x 13/16" 6 6 33060009 xxx D EYE 3 1 399010010 xxx WASH - DBL COIL LOCK - 3/4" 13 15 333100011 SWING ANGLE BRACKET W/ CLIPS 0 2 338200012 xxx BALL HOOK 3 3 495350013 xxx SOCKET EYE 3 3 495250014 XXX TIE-ARMOR ROD (SEE 1000.TY) 3 3 AS REQ'D15 SUSPENSION CLAMP (SEE 1000.CL) 3 3 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

115DV1 115DV1.21 SUSPENSION 115KV POLY INSUL 3 0 40700002 SUSPENSION INSUL 10 20K 0 27 40210003 xxx MACH BOLT - 5/8 x 12" 1 1 30312004 xxx MACH BOLT - 3/4 x 14" 3 3 30414005 xxx WASH - SQ FLAT -2-1/4" 2 2 32920006 xxx WASH - SQ CURV - 4" x 13/16" 3 3 33060007 xxx WASH - DBL COIL LOCK - 5/8" 1 1 33309008 xxx WASH - DBL COIL LOCK - 3/4" 3 3 33310009 XXX D-EYE 3 3 399010010 XXX SOCKET EYE 0 3 495250011 xxx BALL HOOK 0 3 495350012 DEADEND (SEE 1000.DE) 3 3 AS REQ'D

STOCK #QUANTITY

ITEM DESCRIPTION

115DV2-A1 XXX WASHER SQ. CURV 3" x 13/16" 9 33039002 XXX BOLT MACH 14"x3/4" 3 30414003 XXX BOLT MACH 18"x3/4" 6 30418004 XXX D-EYE 3 39901005 XXX EYENUT 3/4" 3 32320006 XXX WASHER DBL COIL LOCK 3/4" 9 33310007 XXX BALL HOOK 6 49535008 SUSPENSION INSULATOR 10" 54 40210009 XXX SOCKET EYE 6 495250010 HORIZ GB 115KV PORC POST INSUL 3 406400011 XXX POST INSUL CLAMP (SEE 1000.CL) 3 AS REQ'D12 JUMPER (SEE 1200.CJ) 3 AS REQ'D13 XXX CONNECTOR - AMPACT (SEE 1000.CN) 6 AS REQ'D14 DEADEND (SEE 1000.DE) 6 AS REQ'D15 XXX WASHER ROUND 3/4" 6 3281200

STOCK#QUANTITY

ITEM DESCRIPTION

ITEM DESCRIPTION QUANTITY STOCK#1 SUSPENSION 115KV POLY INSUL 6 40700002 HORIZ GB 115KV POLY POST INSUL 3 40660003 XXX BOLT MACH 14"x3/4" 3 30414004 XXX BOLT MACH 18"x3/4" 6 30418005 XXX EYENUT 3/4" 3 32320006 XXX WASHER ROUND, 3/4" 6 32812007 XXX WASHER SQ. CURV. 4"X4" 12 33060008 XXX WASHER DBL COIL LOCK 3/4" 9 33310009 xxx D EYE 3 399010010 XXX POST INSUL CLAMP (SEE 1000.CL) 3 AS REQ'D11 JUMPER (SEE 1200.CJ) 3 AS REQ'D12 XXX CONNECTOR - AMPACT (SEE 1000.CN) 6 AS REQ'D13 DEADEND (SEE 1000.DE) 6 AS REQ'D14 XXX WASHER - SQ FLAT - 2-1/4" 2 329200015 XXX BOLT MACH 12"X5/8" 1 303120016 XXX WASHER DBL COIL LOCK 5/8" 1 3330900

* = FOR WOOD POLE CONSRUCTION ONLY

115DV2-B1 xxx WASHER SQ. CURV 4" x 13/16" 6 33060002 xxx BOLT MACH 14"x3/4" 6 30414003 xxx BOLT MACH 18"x3/4" 6 30418004 xxx D-EYE 6 39901005 xxx WASHER DBL COIL LOCK 3/4" 12 33310006 xxx BALL HOOK 6 49535007 SUSPENSION INSULATOR 10" 54 40210008 DEADEND (SEE 1000.DE) 6 AS REQ'D9 HORIZ GB 69KV PORC POST INSUL 3 406250010 xxx POST INSUL CLAMP (SEE 1000.CL) 3 AS REQ'D11 JUMPER (SEE 1000.CJ) 3 AS REQ'D12 xxx CONNECTOR - AMPACT (SEE 1000.CN) 6 AS REQ'D13 xxx SOCKET EYE 6 495250014 xxx WASHER ROUND 3/4" 6 3281200

STOCK#QUANTITY

ITEM DESCRIPTION

ITEM DESCRIPTION QUANTITY STOCK#1 SUSPENSION 115KV POLY INSUL 6 40700002 HORIZ GB 115KV POLY POST INSUL 3 40660003 XXX BOLT MACH 14"x3/4" 4 30414004 XXX BOLT MACH 18"x3/4" 12 30418006 XXX WASHER ROUND, 3/4" 6 32812007 XXX WASHER SQ. CURV. 4"X4" 12 33060008 XXX WASHER DBL COIL LOCK 3/4" 12 33310009 xxx D EYE 6 399010010 XXX POST INSUL CLAMP (SEE 1000.CL) 3 AS REQ'D11 JUMPER (SEE 1200.CJ) 3 AS REQ'D12 XXX CONNECTOR - AMPACT (SEE 1000.CN) 6 AS REQ'D13 DEADEND (SEE 1000.DE) 6 AS REQ'D14 XXX WASHER - SQ FLAT - 2-1/4" 2 329200015 XXX BOLT MACH 12"X5/8" 1 303120016 XXX WASHER DBL COIL LOCK 5/8" 1 3330900

* = FOR WOOD POLE CONSRUCTION ONLY

115DV2-C1 xxx WASHER SQ. CURV 4" x 13/16" 6 33060002 xxx BOLT MACH 14"x3/4" 6 30414003 xxx D-EYE 6 39901004 xxx WASHER DBL COIL LOCK 3/4" 6 33310005 xxx BALL HOOK 6 49535006 SUSPENSION INSULATOR 10" 54 40210007 xxx SOCKET EYE 6 49525008 JUMPER (SEE 1000.CJ) 6 AS REQ'D9 xxx CONNECTOR - AMPACT (SEE 1000.CN) 3 AS REQ'D10 DEADEND (SEE 1000.DE) 6 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

115DV2.1-C1 SUSPENSION 115KV POLY INSUL 6 40700002 xxx D EYE 6 39901003 xxx BOLT MACH 14"x3/4" 6 30414004 xxx WASHER SQ. CURV 4" x 13/16" 12 33060005 xxx WASHER DBL COIL LOCK 3/4" 6 33310006 xxx MACH BOLT - 12X5/8" 1 30312007 xxx WASH - SQ FLAT - 2-1/4" 2 32920008 xxx WASH - DBL COIL LOCK - 5/8" 1 33309009 JUMPER (SEE 1200.CD-5) 3 AS REQ'D10 xxx CONNECTOR - AMPACT (SEE 1000.CN) 6 AS REQ'D11 DEADEND (SEE 1000.DE) 6 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

115DV31 xxx WASHER SQ. CURV 3" x 13/16" 6 33039002 xxx WASHER SQ. CURV 4" x 13/16" 3 33060003 xxx BOLT MACH 14"x3/4" 9 30414004 xxx D-EYE 9 39901005 xxx WASHER DBL COIL LOCK 3/4" 9 33310006 xxx BALL HOOK 9 49535007 SUSPENSION INSULATOR 10" 81 40210008 xxx SOCKET EYE 9 49525009 JUMPER (SEE 1200.CJ) 3 AS REQ'D10 xxx CONNECTOR - AMPACT (SEE 1000.CN) 12 AS REQ'D11 DEADEND (SEE 1000.DE) 9 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

115DX11 XARM 10' HD 4H DEADEND FIBERGLS 1 10950102 POST INSUL-HORIZ GB 115KV POLY 2 40660003 POST INSUL-VERT 115KV POLY 1 40670004 SUSP INSULATOR -115KV POLY 6 40700005 POLE TOP BRACKET115KV 1 45339006 xxx SHORT 115 POST INSUL. STUD 1 45345007 xxx MACH BOLT - 12x5/8 1 30312008 xxx MACH BOLT - 14x3/4 5 30414009 xxx D EYE 1 399010010 xxx DA BOLT - 24x3/4 2 309240011 xxx NUT EYE 1 323200012 xxx WASHER - ROUND GALV. - 3/4" 4 328120013 xxx WASHER - SQ 2 1/4" 6 329200014 xxx WASHER - SQ CURV 3" 6 330390015 xxx WASHER - DBL COIL LOCK - 5/8 1 333090016 xxx WASHER - DBL COIL LOCK - 3/4 8 333100017 JUMPER (See 1200.CJ) 3 AS REQ'D18 xxx POST INSULATOR CLAMP (SEE 1000 3 AS REQ'D19 xxx CONNECTOR - AMPACT (see 1000.CN) 6 AS REQ'D20 DEADEND-BOLTED (SEE 1000.DE) 6 AS REQ'D

STOCK#QNTY

ITEM DESCRIPTION

115DX1.11 FIBERGLASS 10' ASSEMBLY 1 1095010


3 VERTICAL POST 115KV PORC INSUL 1 4065000

4 SUSPENSION INSUL 10" 20K 54 4021000

5 POLE TOP BRACKET 1 4534000

6 xxx SHORT 115KV VERT POST STUD 1 4534500

7 xxx MACH BOLT - 12x5/8 1 3031200

8 xxx MACH BOLT - 14x3/4 5 3041400

9 xxx D EYE 1 3990100

10 xxx DA BOLT - 24x3/4 2 3092400

11 xxx NUT EYE 2 3232000


13 xxx WASHER - SQ 2 1/4" 6 3292000









22 xxx DEADEND-BOLTED TYPE (SEE 1000.DE) 6 AS REQ'D

STOCK#QNTY

ITEM DESCRIPTION

SINGLE DOUBLE115DH2 115DDH2

1 CROSSARM 24'-9" FIBERGLASS 1 1 10824002 BRACKET FIBER XARM DE 2 2 10834003 xxx MACH BOLT - 8 x 3/4" 4 4 30408004 xxx MACH BOLT - 10 x 3/4" 4 4 30410005 xxx MACH BOLT - 12 x 3/4" 3 3 30412006 xxx MACH BOLT - 14 x 3/4" 6 6 30414007 xxx WASH - SQ FLAT - 4-13/16" 6 6 32960008 xxx WASH - SQ CURV - 4-13/16" 6 6 33060009 xxx D EYE 3 3 399010010 xxx EYENUT - 3/4" 0 3 323200011 DEADEND 3 6 AS REQ'D12 xxx WASH - DBL COIL LOCK - 3/4" 13 13 333100013 SUSPENSION 115kv POLY INSUL 3 6 407000014 JUMPER 0 3 AS REQ'D15 CONNECTOR 0 6 AS REQ'D

STOCK#ITEM DESCRIPTION

115DH2.2 115DDH2.21 CROSSARM 24'-9" FIBERGLASS 1 1 10824002 BRACKET FIBER XARM DE 2 2 10834003 xxx MACH BOLT - 8 x 3/4" 4 4 30408004 xxx MACH BOLT - 10 x 3/4" 4 4 30410005 xxx MACH BOLT - 12 x 3/4" 3 3 30412006 xxx MACH BOLT - 14 x 3/4" 6 6 30414007 xxx WASH - SQ FLAT - 4" x 13/16" 6 6 32960008 xxx WASH - SQ CURV -4" x 13/16" 6 6 33060009 xxx D EYE 3 3 3990100

10 xxx EYENUT - 3/4" 0 3 323200011 xxx WASH - DBL COIL LOCK - 3/4" 13 13 333100012 SUSPENSION INSUL 10" 20K 27 54 402100013 xxx SOCKET EYE 3 6 495250014 xxx BALL HOOK 3 6 495350015 DEADEND (SEE 1000.DE) 3 6 AS REQ'D16 JUMPER (SEE 1200.CJ) 0 3 AS REQ'D17 xxx AMPACT CONNECTOR (SEE 1000.CN) 0 6 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

A1.1 A1.21 PIN TYPE INSULATOR 15KV 1 2 4011500+1 PIN TYPE INSULATOR 25KV 1 2 40125002 POLE TOP PIN 1 2 45002003 xxx BOLT MACH 12" x 5/8" 3 4 30312004 xxx SQ FLAT WASHER 2-1/4" 3 3 32920005 xxx DBL COIL 5/8" LOCK WASHER 3 4 33309006 xxx SPOOL INSULATOR 1 1 40250007 xxx CLEVIS 1 1 40252008 xxx TIES (See 1000.TY) 2 2 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

A1.51 xxx BOLT MACH - 5/8 x 12 2 30312002 XXX w ash - sq curv-3 2 33039003 XXX - D-EYE - 5/8 2 39901004 XXX w ash - dbl coil lock - 5/8 2 33309005 SUSPENSION INSUL 15KV POLY 1 4021500+5 SUSPENSION INSUL 25KV POLY 1 40225006 SUSPENSION CLAMP 2 AS REQ'D7 xxx TIES 2 AS REQ'D

STOCK #QUANTITY

ITEM DESCRIPTION

A2.1 A2.2 A2.11 A2.211 CROSSARM - 8'x3"x4" 1 2 1 2 10408002 BRACE-ALLEY ARM - 84" 1 2 1 2 13073003 xxx - BOLT MACH - 12 X 1/2 1 2 1 2 30212004 xxx - BOLT MACH - 6 x 5/8 1 2 1 2 30306005 xxx - BOLT MACH - 12 X 5/8 1 1 0 0 30312006 xxx - BOLT MACH - 16 X 5/8 1 0 1 0 30316007 xxx - BOLT MACH - 20 X 5/8 0 1 0 1 30320008 xxx - BOLT DA - 22 X 5/8 0 1 0 1 30822009 xxx - LAG SCREW - 4x1/2 1 2 1 2 320150010 XXX WASHER - sq-2 1/4 5 11 4 10 329200011 XXX WASHER - DBL COIL LOCK -1/2 1 2 1 2 333080012 XXX WASHER - DBL COIL LOCK - 5/8 4 9 4 9 333090013 PIN TYPE INSULATOR 15KV 1 2 2 4 4011500

+13 PIN TYPE INSULATOR 25KV 1 2 2 4 401250014 xxx - SPOOL INSULATOR 1 1 0 0 402500015 xxx -CLEVIS 1 1 0 0 402520016 xxx CROSSARM PIN 1 2 2 4 450010017 xxx TIES (SEE 1000.TY) 2 3 2 4 AS REQ'D

STOCK # QNTY

ITEM DESCRIPTION

A3.11 A3.131 CROSSARM - 8'x3"x4" 1 2 10408002 xxx - BRACE - FLAT 2 4 13028003 xxx - BOLT MACH - 16 X 5/8 1 0 30316004 xxx - BOLT MACH - 20 X 5/8 0 1 30320005 xxx - BOLT DA - 22 X 5/8 0 2 30822006 xxx - CARRIAGE BOLT - 5" X 3/8" 2 4 32005007 xxx - LAG SCREW 1 2 32015008 XXX - WASHER - sq-2 1/4 2 10 32920009 XXX - WASHER - dbl coil lock - 3/8 2 4 333070010 XXX - WASHER - DBL COIL LOCK - 5/8 1 5 333090011 PIN TYPE INSULATOR 15KV 2 4 4011500

+11 PIN TYPE INSULATOR 25KV 2 4 401250012 xxx CROSSARM PIN 2 4 450010013 xxx TIES (SEE 1000.TY) 2 2 AS REQ'D

STOCK # QNTY

ITEM DESCRIPTION

A3.16 A3.171a CROSSARM - FBRGLS - 8' x 3-1/2"x4-1/2" 1 0 10408081b CROSSARM - FBRGLS - 10' x 3-1/2"x4-1/2" 0 1 10511002 PIN TYPE INSULATOR 15KV 2 2 4011500+2 PIN TYPE INSULATOR 25KV 2 2 40125003 xxx - CROSSARM PIN 2 2 45001004 xxx TIES (SEE 1000.TY) 2 2 AS REQ'D5 xxx - BOLT MACH - 14 X 5/8" 2 2 30314006 xxx - WASHER - sq-curv-3 2 2 33039007 xxx - WASHER - dbl coil lock - 5/8" 2 2 3330900

STOCK #QNTY

ITEM DESCRIPTION

A3.26 A3.271a CROSSARM - FBRGLS - 8' x 4"x7" 2 0 10408081b CROSSARM - FBRGLS - 10' x 4"x7" 0 2 10511002 PIN TYPE INSULATOR 15KV 4 4 4011500+2 PIN TYPE INSULATOR 25KV 4 4 40125003 xxx - CROSSARM PIN 4 4 45001004 xxx TIES (SEE 1000.TY) 4 4 AS REQ'D5 xxx - BOLT MACH - 14 X 5/8" 2 2 30314006 xxx - WASHER - dbl coil lock - 5/8" 10 10 33309007 xxx - BOLT DA 22" x 5/8" 2 2 30822008 xxx - WASHER - SQ-2 1/4 10 10 3292000

STOCK #QNTY

ITEM DESCRIPTION

A4.1.11 xxx - BOLT MACH - 12 X 5/8 2 30312002 XXX - WASHER - SQ CURV-3 2 33039003 DEADEND - BOLTED (SEE 2 AS-REQ'D4 XXX - D-EYE - 5/8 2 39901005 XXX - WASH - DBL COIL LOCK - 5/8 2 33309006 SUSPENSION INSUL - 15KV POLY 1 4021500+6 SUSPENSION INSUL - 25KV POLY 1 4022500

STOCK #QNTY

ITEM DESCRIPTION

A4-3.131 CROSSARM - 8'x3"x4" 2 10408002 xxx - BRACE - FLAT 2 13028003 xxx - EYENUT - 5/8 2 32310004 xxx - BOLT DA - 22 X 5/8 3 30822005 xxx - CARRIAGE BOLT - 5" X 3/8" 2 32005006 xxx - LAG SCREW 1 32015007 XXX - WASHER - SQ-2 1/4 11 32920008 XXX - WASHER - DBLl COIL LOCK - 3/8 2 33307009 XXX - WASHER - DBL COIL LOCK - 5/8 6 333090010 SUSPENSION INSUL - 15KV POLY 1 4021500

+10 SUSPENSION INSUL - 25KV POLY 1 402250011 DEADEND - BOLTED 4 - 1/0 ACSR 2 6530700

STOCK #QNTY

ITEM DESCRIPTION

A4-3.16 A4-3.17CROSSARM - FBRGLS DE ASSMBLY - 8' x 3.5"x4.5" 1 0 1095008

CROSSARM - FBRGLS DE ASSMBLY - 10' x 3.5"x4.5" 0 1 1095010

SUSPENSION INSUL - 15KV POLY 1 1 4021500

SUSPENSION INSUL - 25KV POLY 1 1 4022500

xxx - BOLT MACH - 14 X 3/4" 2 2 3041400

xxx - WASHER - sq-curv-3 2 2 3303900

DEADEND BOLTED (SEE 1000.DE) 2 2 AS REQ'D

xxx - WASHER - dbl coil lock - 5/8" 2 2 3330900

STOCK #QNTY

DESCRIPTION

A5-1.1 A5-1.21 xxx BOLT MACH - 12 X 5/8 4 4 30312002 xxx - EYENUT - 5/8" 2 0 32310003 XXX WASHER - SQ-2 1/4" 2 0 32920004 XXX WASHER - SQ CURV-3" 2 4 33039005 XXX WASHER - DBL COIL LOCK - 5/8" 4 4 33309006 XXX - D-EYE - 5/8 2 4 39901007 PIN TYPE INSULATOR 15KV 1 0 4011500

+7 PIN TYPE INSULATOR 25KV 1 0 40125008 SUSPENSION INSUL - 15KV POLY 2 2 4021500

+8 SUSPENSION INSUL - 25KV POLY 2 2 40225009 PIN - POLE TOP 1 0 4500200

10 JUMPER 2 2 AS REQ'D11 xxx CONNECTOR - AMPACT 4 4 AS REQ'D12 xxx 4 SOL AL TIE WIRE 2FT 0 543050013 DEADEND - BOLTED 4 4 AS-REQ'D

STOCK #QNTY

ITEM DESCRIPTION

A5-3.131 CROSSARM - 8'x3"x4" 2 1040800

2 xxx - BRACE - FLAT 2 1302800

3 xxx - BOLT DA - 20 X 5/8 3 3082000

4 xxx - CARRIAGE BOLT - 5" X 3/8" 4 3200500

5 xxx - LAG SCREW 2 3201500

6 xxx - EYENUT - 5/8 4 3231000

7 XXX - WASHER - sq-2 1/4 11 3292000

8 XXX - WASHER - DBL COIL LOCK - 3/8 2 3330700

9 XXX - WASHER - DBL COIL LOCK - 5/8 6 3330900

10 PIN TYPE INSULATOR 15KV 4 4011500

+10 PIN TYPE INSULATOR 25KV 4 4012500

11 SUSPENSION INSUL - 15KV POLY 2 4021500

+11 SUSPENSION INSUL - 25KV POLY 2 4022500

12 xxx CROSSARM PIN 4 4500100

13 JUMPER (SEE 1200.CN) 2 AS REQ'D

14 xxx CONNECTOR - AMPACT 4 AS REQ'D

15 xxx 4 SOL AL TIE WIRE 12FT 5430500

16 DEADEND - BOLTED 4 AS REQ'D

STOCK #QNTY

ITEM DESCRIPTION

A5-3.16 A5-3.171a FBRGLS DE ASSMBLY - 8' x 4"x7" 1 0 10950081b FBRGLS DE ASSMBLY - 10' x 4"x7" 0 1 10955002 PIN TYPE INSULATOR 15KV 2 2 4011500+2 PIN TYPE INSULATOR 25KV 2 2 40125003 SUSPENSION INSUL - 15KV POLY 2 2 4021500+3 SUSPENSION INSUL - 25KV POLY 2 2 40225004 xxx - CROSSARM PIN 2 2 45001005 xxx - BOLT MACH - 14 X 3/4" 2 2 30414006 xxx - WASHER - sq curv-3" 2 2 33039007 xxx - WASHER - dbl coil lock -3/4" 2 2 33310008 xxx - 4 SOL AL TIE WIRE 2FT 2FT 54305009 JUMPER - (SEE 1200.CJ) 2 2 AS REQ'D10 xxx CONNECTOR - AMPACT (SEE 1000.CN) 5 5 AS REQ'D11 DEADEND - BOLTED (SEE 1000.DE) 4 4 AS REQ'D

STOCK #QNTY

ITEM DESCRIPTION

A6-1.21 A6-1.221 xxx BOLT MACH - 12 X 5/8 4 4 30312002 xxx - EYE NUT 5//8" 0 2 32310003 xxx - WASHER - sq-2 1/4 2 2 32920004 xxx - WASHER - sq curv-3 2 2 33039005 xxx - WASHER - dbl coil lock - 5/8 4 4 33309006 XXX - D-EYE - 5/8 2 2 39901007 SUSPENSION INSUL - 15KV POLY 1 2 4021500+7 SUSPENSION INSUL - 25KV POLY 1 2 40225008 xxx HOT LINE CLAMP 2 4 65885009 CUTOUT 100A 15KV 1 2 7252200+9 CUTOUT 100A 25KV 1 2 725380010 CUTOUT/ARRESTOR EXT BRKT 1 2 725900011 XXX 4-4/0 STIRRUP CLAMP 2 4 658870012 JUMPER (SEE 1200.CJ) 3 6 AS REQ'D13 XXX FUSE (SEE 830) 1 2 AS REQ'D14 DEADEND - BOLTED (SEE 1000.DE) 2 4 AS REQ'D15 XXX CONNECTOR - AMPACT (SEE 1000.CN) 3 4 AS REQ'D

STOCK #QNTY

ITEM DESCRIPTION

A6-1.301 PIN TYPE INSULATOR 15KV 1 4011500+1 PIN TYPE INSULATOR 25KV 1 40125002 CUTOUT 100A 15KV 1 7252200+2 CUTOUT 100A 25KV 1 72538003 xxx HOT LINE CLAMP 1 65885004 xxx 4-4/0 STIRRUP CLAMP (SEE 1000.CL) 1 65887005 JUMPER (SEE 1200.CJ) 1 AS REQ'D6 xxx FUSE (SEE 830.FU) 1 AS REQ'D7 DEADEND SLACKSPAN (SEE 1000.DE) 2 AS REQ'D8 xxx SHORT SHANK DIST PIN 1 45003009 BRACKET - POLE SIDE - FBRGLS 1 450060010 xxx BOLT MACH - 12 X 5/8 3 303120011 xxx WASHER - SQ-2 1/4" 3 329200012 xxx WASHER - DBL COIL LOCK - 5/8" 3 333090013 xxx - SPOOL INSULATOR 1 402500014 xxx -CLEVIS 1 402520015 xxx TIES 2 AS REQ'D16 xxx CONNECTOR - AMPACT 2 AS REQ'D

STOCK #QNTY

ITEM DESCRIPTION

A6-1.311 SUSPENSION INSULATOR 15KV POLY 1 4021500+1 SUSPENSION INSULATOR 25KV POLY 1 40225002 EXTENSION LINK 1 39920003 xxx D EYE 2 39901004 xxx BOLT MACH - 12 X 5/8 2 30312005 xxx WASH -SQ CURV 2-1/4" 2 32920006 xxx WASHER - DBL COIL LOCK - 5/8" 2 33309007 DEADEND - BOLTED 2 AS-REQ'D8 JUMPER - 2 AS REQ'D9 xxx CONNECTOR - AMPACT 2 AS REQ'D10 CUTOUT 100A 15KV 1 7252200

+10 CUTOUT 100A 25KV 1 725380011 xxx FUSE - 1 AS REQ'D12 xxx HOT LINE CLAMP "HOT TAP" 2 658850013 xxx STIRRUP CLAMP - 2 AS REQ'D

STOCK #QNTY

ITEM DESCRIPTION

A6-3.61 CROSSARM - 8'x3"x4" 2 10408002 xxx BRACE - FLAT 1 13028003 xxx - BOLT MACH - 20 X 5/8 1 30320004 xxx - BOLT DA - 22 X 5/8 2 30822005 xxx - CARRIAGE BOLT - 3/8" x 5" 2 32005006 xxx - LAG SCREW 4" x 1/2" 1 32015007 xxx - EYENUT - 5/8 2 32310008 xxx - WASHER - sq-2 1/4 10 32920009 xxx - WASHER - DBL COIL LOCK - 3/8 2 333070010 xxx - WASHER - DBL COIL LOCK - 5/8 6 333090011 PIN TYPE INSULATOR 15KV 1 401150011 PIN TYPE INSULATOR 25KV 1 401250012 SUSPENSION INSUL - 15KV POLY 1 402150012 SUSPENSION INSUL - 25KV POLY 1 402250013 xxx CROSSARM PIN 1 450010014 JUMPER - 2 AS REQ'D15 xxx CONNECTOR - AMPACT 4 AS REQ'D16 xxx TIES- (SEE 1000.TY) 1 AS REQ'D17 DEADEND - BOLTED (SEE 1000.DE) 2 AS-REQ'D

STOCK #QNTY

ITEM DESCRIPTION

A7.1.11 POLE TOP PIN 1 45002002 PIN TYPE INSULATOR 15KV 1 4011500

+2 PIN TYPE INSULATOR 25KV 1 40125003 xxx BOLT MACH-12x5/8" 3 30312004 xxx WASHER-SQ-2-1/4" 3 32920005 xxx - WASH - DBL COIL LOCK - 5/8 3 33309006 xxx SPOOL INSULATOR CLEVIS 1 40252007 xxx SPOOL INSULATOR 1 40250008 xxx STIRRUP CLAMP (SEE 1000.CL) 2 AS-REQ'D9 xxx HOT LINE CLAMP 2 6588500

10 xxx CONNECTOR - AMPACT (SEE 1000.CN) 2 AS-REQ'D11 JUMPER (SEE 1200.CJ) 2 AS-REQ'D12 xxx TIES (SEE 1000.TY) 2 AS-REQ'D

STOCK #QNTY

ITEM DESCRIPTION

A7-1.31 PIN TYPE INSULATOR 15KV 1 4011500+1 PIN TYPE INSULATOR 25KV 1 40125002 xxx SHORT SHANK DIST PIN 1 45003003 BRACKET - POLE SIDE - FBRGLS 1 45006004 xxx BOLT MACH - 12 X 5/8 3 30312005 XXX WASHER - SQ-2 1/4" 3 32920006 XXX WASHER - DBL COIL LOCK - 5/8" 3 33309007 DEADEND SLACKSPAN 2 AS REQ'D8 xxx - SPOOL INSULATOR 1 40250009 xxx -CLEVIS 1 402520010 xxx TIES (SEE 1000.TY) 2 AS REQ'D

STOCK #QNTY

ITEM DESCRIPTION

B1.51 xxx BOLT MACH - 5/8 x 12 3 30312002 xxx WASHER - sq curv-3 3 33039003 xxx - D-EYE - 5/8 3 39901004 xxx WASHER - dbl coil lock - 5/8 3 33309005 SUSPENSION INSUL - 15KV POLY 2 4021500+5 SUSPENSION INSUL - 25KV POLY 2 40225006 SUSPENSION CLAMP 3 AS REQ'D7 TIES 3 AS REQ'D

STOCK #QNTY

ITEM DESCRIPTION

B2.1 B2.2 B2.11 B2.211 CROSSARM - 8'x3"x4" 1 2 1 2 10408002 BRACE-ALLEY ARM - 84" 1 2 1 2 13073003 xxx - BOLT MACH - 6 x 5/8 1 2 1 2 30306004 xxx - BOLT MACH - 12 X 5/8 2 3 1 2 30312005 xxx - BOLT MACH - 16 X 5/8 1 0 1 0 30316006 xxx - BOLT MACH - 20 X 5/8 0 1 0 1 30320007 xxx - BOLT DA - 22 X 5/8 0 1 0 1 30822008 xxx - LAG SCREW 1 2 1 2 32015009 xxx - WASHER - sq-2 1/4 5 11 4 10 329200010 xxx - WASHER - DBL COIL LOCK - 5/8 4 8 3 7 333090011 PIN TYPE INSULATOR 15KV 2 4 3 6 4011500

+11 PIN TYPE INSULATOR 25KV 2 4 3 6 401250012 xxx - SPOOL INSULATOR 1 1 0 0 402500013 xxx -CLEVIS 1 1 0 0 402520014 xxx- CROSSARM PIN 2 4 3 6 450010015 TIES (SEE 1000.TY) 2 4 3 6 AS REQ'D

STOCK #QUANTITY

ITEM DESCRIPTION

B3.01 B3.031 CROSSARM - 8'x3"x4" 1 2 10408002 xxx - BRACE - FLAT 2 2 13028003 xxx- BOLT MACH - 12x5/8 1 1 30312004 xxx - BOLT MACH - 16 X 5/8 1 0 30316005 xxx - BOLT MACH - 20 X 5/8 0 1 30320006 xxx - BOLT DA - 22 X 5/8 0 2 30822007 xxx - LAG SCREW 1 1 32015008 XXX - WASHER - sq-2 1/4 3 11 32920009 XXX - WASHER - dbl coil lock - 3/8 2 2 333070010 XXX - WASHER - DBL COIL LOCK - 5/8 2 6 333090011 PIN TYPE INSULATOR 15KV 2 4 4011500

+11 PIN TYPE INSULATOR 25KV 2 4 401250012 xxx CROSSARM PIN 2 4 450010013 TIES (SEE 1000.TY) 2 4 AS REQ'D14 xxx - SPOOL INSULATOR 1 1 402500015 xxx - CLEVIS 1 1 402520016 xxx - CARRIAGE BOLT 5"x3/8" 2 2 3200500

STOCK #QNTY

ITEM DESCRIPTION

B3.3 B3.41 xxx BOLT MACH 10" x 5/8" 2 0 3031000

2 xxx BOLT MACH 12" x 5/8" 3 5 3031200

3 xxx SQ FLAT WASHER 2-1/4" 5 5 3292000

4 xxx DBL COIL 5/8" LOCK WASHER 5 5 3330900

5 PIN TYPE INSULATOR 15KV 2 4 4011500

+5 PIN TYPE INSULATOR 25KV 2 4 4012500

6 xxx SPOOL INSULATOR 1 1 4025000

7 xxx CLEVIS 1 1 4025200

8 POLE TOP PIN 1 2 4500200

9 xxx SHORT SHANK DIST PIN 0 2 4500300

10 FIBERGLASS SIDEPOLE BRACKET PIN 1 0 4500600

11 FIBERGLASS SIDEPOLE BRACKET CLOVER 0 2 4500700

12 xxx TIES (See 1000.TY) 3 2 AS REQ'D

STOCK#QUANTITY

ITEM DESCRIPTION

B3.11 B3.131 CROSSARM - 8'x3"x4" 1 2 1040800

2 xxx - BRACE - FLAT 2 2 1302800

3 xxx - BOLT MACH - 16 X 5/8 1 0 3031600

4 xxx - BOLT DA - 22 X 5/8 0 3 3082200

5 xxx - CARRIAGE BOLT - 5" X 3/8" 2 2 3200500

6 xxx - LAG SCREW 1 1 3201500

7 XXX - WASHER - sq-2 1/4 2 11 3292000

8 XXX - WASHER - dbl coil lock - 3/8 2 2 3330700

9 XXX - WASHER - DBL COIL LOCK - 5/8 1 6 3330900



11 xxx - CROSSARM PIN 3 6 4500100

12 TIES (SEE 1000.TY) 3 6 AS REQ'D

STOCK # QUANTITY

ITEM DESCRIPTION

B3.161 CROSSARM - FBRGLS - 8' x 3-1/2"x4-1/2" 1 10408082 PIN TYPE INSULATOR 15KV 3 4011500+2 PIN TYPE INSULATOR 25KV 3 40125003 xxx - CROSSARM PIN 3 45001004 TIES (SEE 1000.TY) 3 AS REQ'D5 xxx - BOLT MACH - 14 X 5/8" 2 30314006 xxx - WASHER - sq-curv-3 2 33039007 xxx - WASHER - dbl coil lock - 5/8" 2 3330900

STOCK #QNTY

ITEM DESCRIPTION

B3.181 CROSSARM - FBRGLS - 8' x 4"x7" 2 10408082 PIN TYPE INSULATOR 15KV 6 4011500+2 PIN TYPE INSULATOR 25KV 6 40125003 xxx - CROSSARM PIN 6 45001004 TIES (SEE 1000.TY) 6 AS REQ'D5 xxx - BOLT MACH - 14 X 5/8" 2 30314006 xxx - WASHER - dbl coil lock - 5/8" 10 33309007 BOLT DA 22" x 5/8" 2 30822008 xxx - WASHER - SQ. - 2 1/4 10 3292000

STOCK #QNTY

ITEM DESCRIPTION

B3.21 B3.231 CROSSARM - 8'x3"x4" 1 2 10408002 xxx - BRACE - FLAT 2 2 13028003 xxx - CARRIAGE BOLT - 5" X 3/8" 2 2 32005004 xxx - LAG SCREW 1 1 32015005 PIN TYPE INSULATOR 15KV 3 5 4011500+5 PIN TYPE INSULATOR 25KV 3 5 40125006 POLETOP PIN 1 1 45002007 xxx - CROSSARM PIN 2 4 45001008 xxx - BOLT MACH - 12 X 5/8 2 2 30312009 xxx - BOLT MACH - 16 X 5/8 1 0 303160010 xxx - BOLT DA - 22 X 5/8 0 3 308220011 XXX - WASHER - SQ-2 1/4 4 11 329200012 XXX - WASHER - DBL COIL LOCK - 3/8 2 2 333070013 XXX - WASHER - DBL COIL LOCK - 5/8 4 8 333090014 TIES (SEE 1000.TY) 3 3 AS REQ'D

STOCK #QUANTITY

ITEM DESCRIPTION

B4-1.1 B4-1.21 xxx - BOLT MACH - 12 X 5/8 3 3 30312002 XXX - WASHER - SQ CURV-3 3 3 33039003 DEADEND - BOLTED (SEE1000.DE) 3 3 AS-REQ'D4 EXTENSION LINK 0 1 39920005 XXX - D-EYE - 5/8 3 3 39901006 XXX - WASH - DBL COIL LOCK - 5/8 3 3 33309007 SUSPENSION INSUL - 15KV POLY 2 2 4021500+7 SUSPENSION INSUL - 25KV POLY 2 2 4022500

STOCK #QUANTITY

ITEM DESCRIPTION

B4-3.31 CROSSARM - 8'x3"x4" 2 10408002 xxx - BRACE - FLAT 2 13028003 xxx - BOLT MACH - 12 X 5/8 1 30312004 xxx - EYENUT - 5/8 2 30810005 xxx - BOLT DA - 22 X 5/8 3 30822006 xxx - CARRIAGE BOLT - 5" X 3/8" 2 32005007 xxx - LAG SCREW 4" x 1/2" 1 32015008 XXX - WASHER - SQ-2 1/4 10 32920009 XXX - WASHER - Sq. Curv-3" 1 330390010 XXX - WASHER - DBL COIL LOCK - 3/8 2 333070011 XXX - WASHER - DBL COIL LOCK - 5/8 7 333090012 XXX - D-EYE - 5/8 1 399010013 SUSPENSION INSUL - 15KV POLY 2 4021500


STOCK #QNTY

ITEM DESCRIPTION

B4-3.131 CROSSARM - 8'x3"x4" 2 10408002 xxx - BRACE - FLAT 2 13028003 XXX - D-EYE - 5/8 1 39901004 xxx - EYENUT - 5/8 2 30810005 xxx - BOLT DA - 22 X 5/8 3 30822006 xxx - CARRIAGE BOLT - 5" X 3/8" 2 32005007 xxx - LAG SCREW 1 32015008 XXX - WASHER - SQ-2 1/4 11 32920009 XXX - WASHER - dbl coil lock - 3/8 2 333070010 XXX - WASHER - DBL COIL LOCK - 5/8 6 333090011 SUSPENSION INSUL - 15KV POLY 2 4021500


STOCK #QNTY

ITEM DESCRIPTION

B4-3.6 B4-3.71 CROSSARM - FBRGLS DE ASSMBLY - 8' x 4"x7" 1 0 1095008

2 CROSSARM - FBRGLS DE ASSMBLY - 10' x 4"x7" 0 1 1095010

3 xxx BOLT MACH - 12 X 5/8 1 1 3031200

4 xxx - BOLT MACH - 14 X 3/4 2 2 3041400

5 xxx - EYENUT - 5/8 1 1 3231000

6 XXX - WASHER - sq curv-3 1 1 3303900

7 xxx - WASHER - sq-curv-4 2 2 3306000

8 xxx - WASHER - dbl coil lock - 5/8 1 1 3330900


10 XXX - D-EYE - 5/8 1 1 3990100

11 SUSPENSION INSUL - 15KV POLY 2 2 4021500

+11 SUSPENSION INSUL - 25KV POLY 2 2 4022500

12 DEADEND - BOLTED (SEE 1000.DE) 2 2 AS-REQ'D

STOCK #QUANTITY

ITEM DESCRIPTION

B4-3.16 B4-3.171 CROSSARM - FBRGLS DE ASSMBLY - 8' x 3.5"x4.5" 1 0 1095008

2 CROSSARM - FBRGLS DE ASSMBLY - 10' x 3.5"x4.5" 0 1 1095010

3 xxx BOLT MACH - 14 X 3/4" 2 2 3041400

4 xxx - EYENUT - 3/4" 1 1 3232000

5 xxx WASHER - sq-curv-3" 2 2 3303900

6 xxx WASHER - dbl coil lock - 3/4 2 2 3331000



8 DEADEND - BOLTED 3 3 AS-REQ'D

STOCK #QNTY

ITEM DESCRIPTION

B5-1.21 xxx BOLT MACH - 12 X 5/8 6 30312002 XXX WASHER - SQ CURV-3" 6 33039002 XXX WASHER - DBL COIL LOCK - 5/8" 6 33309004 XXX D-EYE - 5/8 6 39901005 SUSPENSION INSUL - 15KV POLY 4 4021500+5 SUSPENSION INSUL - 25KV POLY 4 40225006 JUMPER - (SEE 1200.CJ) 3 AS REQ'D7 CONNECTOR - AMPACT 6 AS REQ'D8 DEADEND - BOLTED 6 AS REQ'D

STOCK #QNTY

ITEM DESCRIPTION

B5-3.31 CROSSARM - 8'x3"x4" 2 10408002 xxx - BRACE - FLAT 2 13028003 xxx - BOLT MACH - 12 x 5/8 1 30312004 xxx - BOLT DA - 24 X 5/8 3 30824005 xxx - CARRIAGE BOLT - 5" X 3/8" 2 32005006 xxx - LAG SCREW 1 32015007 xxx - EYENUT - 5/8 5 32310008 XXX - WASHER - sq-2 1/4 12 32920009 XXX - WASHER - DBL COIL LOCK - 3/8 2 333070010 XXX - WASHER - DBL COIL LOCK - 5/8 7 333090011 XXX - D-EYE - 5/8 1 399010012 PIN TYPE INSULATOR 15KV 4 4011500

+12 PIN TYPE INSULATOR 25KV 4 401250013 SUSPENSION INSUL - 15KV POLY 2 4021500

+13 SUSPENSION INSUL - 25KV POLY 2 402250014 XXX - CROSSARM PIN 4 450010015 JUMPER - (SEE 1200.CJ) 3 AS REQ'D16 CONNECTOR - AMPACT (SEE 1000.CN) 6 AS REQ'D17 XXX 4 SOL AL TIE WIRE 12FT 543050018 DEADEND - 4 - 1/0 ACSR 6 6530700

STOCK #QNTY

ITEM DESCRIPTION

B5-3.131 CROSSARM - 8'x3"x4" 2 10408002 xxx - BRACE - FLAT 4 13028003 xxx - BOLT DA - 24 X 5/8 3 30824004 xxx - CARRIAGE BOLT - 5" X 3/8" 4 32005005 xxx - LAG SCREW 2 32015006 xxx - EYENUT - 5/8 6 32310007 XXX - WASHER - sq-2 1/4 11 32920008 XXX - WASHER - DBL COIL LOCK - 3/8 4 33307009 XXX - WASHER - DBL COIL LOCK - 5/8 5 333090010 PIN TYPE INSULATOR 15KV 6 4011500

+10 PIN TYPE INSULATOR 25KV 6 401250011 SUSPENSION INSUL - 15KV POLY 4 4021500

+11 SUSPENSION INSUL - 25KV POLY 4 402250012 xxx - CROSSARM PIN 6 450010013 JUMPER - (SEE 1200.CJ) 3 AS REQ'D14 CONNECTOR - AMPACT (SEE 1000.CN) 6 AS REQ'D15 xxx 4 SOL AL TIE WIRE 12ft 543050016 DEADEND - BOLTED 4 - 1/0 ACSR 6 6530700

STOCK #QNTY

ITEM DESCRIPTION

8FT 10FTB5-3.6 B5-3.7

1 CROSSARM - FBRGLS DE ASSMBLY - 8 x 4"x7" 1 0 1095008


3 xxx - BOLT MACH - 14 X 5/8 1 1 3031400

4 xxx - BOLT MACH - 14 X 3/4 2 2 3041400

5 xxx - EYENUT - 5/8 1 1 3231000

6 XXX - WASHER - sq curv-3" 2 2 3303900

7 xxx - WASHER - sq-curv-4" 2 2 3306000



10 xxx - D-EYE - 5/8 1 1 3990100





13 xxx CROSSARM PIN 2 2 4500100

14 JUMPER - (SEE 1200.CJ) 3 3 AS REQ'D

15 xxx CONNECTOR - AMPACT (SEE 1000.CN) 6 6 AS REQ'D

16 DEADEND - BOLTED (SEE 1000.DE) 6 6 AS REQ'D

17 xxx 4 SOL AL TIE WIRE 6FT 6FT 5430500


B5-3.16 B5-3.171 CROSSARM - FBRGLS DE ASSMBLY - 8' x 4"x7" 1 0 1095008


3 xxx - BOLT MACH - 14 X 5/8" 1 1 3031400

4 xxx - BOLT MACH - 14 X 3/4" 2 2 3041400

5 xxx - EYENUT - 5/8 1 1 3231000





10 XXX - D-EYE - 5/8 1 1 3990100

11 CROSSARM PIN 3 3 4500100





14 JUMPER - 3 3 AS REQ'D

15 CONNECTOR - AMPACT 6 6 AS REQ'D

16 DEADEND - BOLTED 6 6 AS REQ'D

17 xxx 4 SOL AL TIE WIRE 6FT 6FT 5430500

18 xxx - EYENUT - 3/4 1 1 3232000

STOCK #QNTY

ITEM DESCRIPTION

Documents

Construction Standards · 2020. 1. 21. · 69tv1 69tv1.1 1 horiz gb 69kv poly post insul. 3 0 4063000 2 horiz gb 69kv porc. post insul. 0 3 4062500 3 xxx mach bolt - 12 x 5/8 1 1