CONSTRUCTION – GENERAL CONSTRUCTION CONSTRUCTION … · CONSTRUCTION – UTILITIES, OIL & GAS ... ranging from sleeper layers ... As empty building sites become less each day and

We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany2015

DEMOLITION7

CONSTRUCTION – GENERAL CONSTRUCTION

CONSTRUCTION – QUICK HITCHES & BUCKETS

CONSTRUCTION – TILTROTATORS

CONSTRUCTION – LANDSCAPING & SNOW REMOVAL

CONSTRUCTION – UTILITIES, OIL & GAS

SCRAP PROCESSING

DEMOLITIONMATERIAL HANDLING

RAILWAY

CUSTOM UNITS

1

7

2

3

4

5

6

8

9

10

kinshofer Worldwide

What has now become a worldwide operating company once started in a small garage in the Bavarian uplands. Innovation and quality have made the company what it is today: a global player in the construction industry. Kinshofer can count on a range of subsidiaries and sales offices worldwide to promote its products.

Kinshofer France S.A.R.L. FRANCE

1986

Kinshofer Aponox Oy FINLAND2009

Kinshofer North America CANADA2000

Kinshofer GmbHHeadquarters Marienstein, GERMANY1971

DEMAREC B.V. THE NETHERLANDS

2006

Darda Kinshofer Construction Machinery Co. Ltd.

PR CHINA2008

Kinshofer UK UNITED KINGDOM1984

RF-System ABSWEDEN

2011

Kinshofer USA UNITED STATES OF AMERICA

2013

A History of Quality and Success For more than 40 years we have specialized in the development and construction

of quality attachments for cranes and excavators. Within the industry, our name has become synonymous for innovation, quality and reliability!

ALWAYS IN MIND – OUR CLIENT‘S NEEDS

THERE IS NO ALTERNATIVE TO QUALITY

KINSHOFER GmbH is one of the leading manufacturers of attachments for loader cranes and hydraulic excavators, as well as for rotators, Tiltrotators and rotary actuators. The headquarters of the medium-sized company is located in the Bavarian village Waakirchen/Marienstein, Germany. Originally named KINSHOFER Maschinenbau Miesbach, the company was founded by Alfred Kinshofer on August 4, 1971 in Miesbach, Bavaria, Germany. At the beginning the small business only produced bridge bearings, handrails and accessories for brick factories, such as tunnel kiln trucks or lifting and lowering devices for tile presses. Two years after the company‘s founding, the development of the first brick stack grapple began. Just one year later, the construction of a pallet fork and a clamshell bucket followed. As the capacities of the original factory had been exhausted, a new plant was built in eastern Miesbach in 1975. Only two years later, this building had grown too small again, so a second building was constructed with additional office buildings. In 1979, the company‘s first rotator with 360° endless rotation was developed. The company changed its name to KINSHOFER Greiftechnik GmbH in 1980, and the first sales activities in the United States and the UK took place. In 1984, the first foreign sales subsidiary of the company was founded in Stockport, Cheshire, England: KINSHOFER UK Ltd. Alfred Kinshofer sold his shares in 1987, but kept being a worthy consultant for the company. The same year, KINSHOFER France was founded in Strasbourg, France. Planning began in 1997 for factories in the Austrian village of Gmünd and the Czech České Velenice, and one year later MARS Greiftechnik was founded and production started.In the year 2000, KINSHOFER made the step overseas and acquired the Canadian company Liftall which was to become the subsidiary KINSHOFER North America. A major milestone for KINSHOFER occurred in 2003: the development of the patented HPXdrive that bestowed the if-Silver Award for ”Product Design“ in the ”Industry“ branch upon the company. In 2006, the company finally got its current name: KINSHOFER GmbH. The same year, the Dutch specialist for demolition and recycling tools Demarec B.V. was acquired.The worldwide operating Swedish company Lifco AB acquired KINSHOFER GmbH in 2007. Another logical consequence was the expansion to the east, and so the company Darda KINSHOFER Construction Machinery Co. Ltd. was founded in 2008 in the Chinese capital of Beijing. The same year marks the foundation of KINSHOFER Aponox Oy in Hämeenlinna, Finland with the main focus on NOX Tiltrotators. As the year 2011 came to an end, KINSHOFER acquired the Swedish company RF-System AB, as well as the intellectual property and distribution rights of New Zealand‘s Wedgelock Equipment Ltd. at the beginning of 2012, further broadening the available product range. In 2013, the new KINSHOFER US factory opened in Sanborn in the state of New York.

KINSHOFER counts on a high vertical integration. The products are designed in the proper development department, constructed and finally tested in the in-house test laboratory. Thus the company retains control not only over the production, but also the product itself. Constant communication and information exchange between the company and its clients results in further developments and innovations that keep the company close to the customer.In the Action Park at the company‘s headquarters, there is also the possibility for dealers and clients to take part in training and tool demonstrations. Always close to the client – up front, everywhere ...

Primary Demolition Secondary Demolition Steel

Landscaping / Snow Removal Road Construction Civil Engineering Utilities

Scrap Metal Scrap Tires Scrap Rails

Within the range of attachments for construction, you can find different and versatile tools made by KINSHOFER for tasks from landscaping to road construction. Buckets and Clamshell buckets for different ope-rating weights and in different widths, suitable adapters and quick hitches are part of the product range as well as smaller demolition and sorting grabs, multi purpose grabs, rock grabs, augers and brushes for dirt and snow removal. Innovations not missed are the unique cylinderless nox Tiltrotator, the revolutionary HPXdrive – no hoses, no hydraulic cylinders, easy shell ex-change and absolutely maintenance-free – or the C-VE series with its fast shell exchange system!

No matter if demolishing, breaking, comminuting or separating – with attachments for demolition and recycling you will always have the perfect tool.With attachments for a broad scope of machines, reaching from demolition grabs for lighter weight excavators up to dedicated shears for excavators of up to 80t operating weight – the perfect soluti-on for each weight and task is available.Innovations do not fall short: the MQP with its strong power thanks to the - cylinder, or the , making the exchange of jaws possible within only a few minutes on site!

Scrap processing has become an increasingly important concern throughout the world. Scrap metal has to be cut, broken, handled, separated, processed and recycled, similar to plastic, glass, and tires.Rail scrap processing is just one important part of the large scrap industry.At KINSHOFER you will find the perfect tool for your task, no matter if you want to cut beams, rails, tires, containers, tanks or entire ships! Entrust KINSHOFER with your scrap processing task – we will find the perfect solution for you!

Many Applications - One Solution: kinshoferOver 40 years of experience as well as involvement with en d users in the development process, combined

with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

Many Applications - One Solution: kinshoferOver 40 years of experience as well as involvement with en d users in the development process, combined

with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

Construction Off-Shore Nuclear Pipeline / Geothermal

Waste Bulk Material & Dry Cargo Timber

Rail Track Construction Rail Track Maintenance Scrap Rails

It makes no difference whether you are loading or discharging boat or train carriages, handling scrap or wood or performing demolition tasks – within the KINSHOFER range »Material Handling« you are sure to find the optimal tool. Excavators from 11t to 80t operating weight can be equipped. Orange peel grabs with different capacities and designs are part of the available tools as well as demolition and sorting grabs, re-handling clamshell buckets or timber grabs. Outstanding: the extraordinary C80H re-hand-ling clamshell bucket with the incredible volume of 5000 litres!

As the tasks to be accomplished are becoming more and more complex, the requirements to be met increase accordingly. Many times, no standard tool can meet to solve clients‘ demands and thus, only a custom-made product can solve the problem. Our existing products for custom and special solutions range from tools for off-shore operations, nuclear tasks to geothermal appli-cations. You have a certain problem on hand requiring a special solution? KINSHOFER will find the perfect answer for you and your task!

There is hardly another invention that has changed the transport system as much as the railway. Railroads have, and continue, to play a large role in the way people and products are transported around the world. It is vital that railways are kept operational and safe.No matter if it is about the construction, maintenance or demolition of railroad tracks: the KINSHOFER range meets every demand, ranging from sleeper layers and ballast tampers to large mobile rail cutters. Find everything you need and more in one single company!

6We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany

As empty building sites become less each day and the recycling of the building materials becomes more and more important, the demand on more specialised, faster and better tools for the primary and the secondary demolition rise accordingly. KINSHOFER and DEMAREC, the latter being the Dutch specialist for demolition tools, provide the ideal tools for your demolition task. The demolition of e.g. buildings, ships or airplanes, the pulverising of concrete constructions, the separation and cutting of concrete reinforcements and the breaking of steel beams - all this and more is no problem for the KINSHOFER and DEMAREC attachments for demolition and your task can be realised in a fast and economic way.

Demolition...... includes primary and secondary demolition, as well

as the sorting and recycling of the demolished material. No matter the task, KINSHOFER provides the ideal tool.

The DSP Static Pulverizer is available as Standard or stronger Extreme version

For pri-mary and secondary demolition: The DRP Rotating Pulverizer

The DRC 520 is the optimum tool for indoor-demolition tasks

Ideal for sorting and demolition: The D H-P-series for excavators

with up to 80t operating weight

Due to the exchangeable jaws extremely versatile: The MQP Multi-Quick

Processor, here with Combi Jaws

With six types of exchangeable jaws a universal shredder:

The MQP Multi-Quick Processor – here with steel jaws

Unbeatable for the demolition

of wooden constructions: D20H-

T 5-Finger Timber Grab

The DRS Mobile Shear is the ideal tool to break industrial and mixed scrap

The ideal partner on every scrap yard: The DRS Mobile Shear


Contents

Cata

log

effec

tive

Janu

ary

2015

—> Further information about KINSHOFER products can be found on our web site www.kinshofer.com

Summary Listed by Operating Weight of Excavator 8

PremiumLine 9

Demolition and Sorting Grabs

up to 2t / 4400 lbs operating weight with horizontal cylinders: D02H 12

up to 6t / 13200 lbs operating weight with HPXdrive : D03HPX / D05HPX 13

up to 9t / 19800 lbs operating weight with HPXdrive : D09HPX 14

up to 27t / 59400 lbs operating weight with horizontal cylinder: D15H/D20H/D27H with metal rlbs 15

up to 27t / 59400 lbs operating weight with horizontal cylinder: D12H-P / D15H-P / D20H-P / D27H-P with perforated shells 16

up to 80t /176000 lbs operating weight Heavy Duty with horizontal cylinder: D15H-P-75HD / D16H-P-90HD / D19H-P-85HD / 17 D20H-P100HD / D24H-P100HD / D32H-P-110HD / D40H-P-125HD / D50H-P-140HD / D70H-P-150HD with perforated shells

5-Finger Timber Grab

up to 27t / 59400 lbs operating weight with horizontal cylinder: D15H-T/D20H-T/D27H-T 18

Concrete Crusher

up to 7t / 15400 lbs operating weight: DRC 520 19

Static Pulverisers

up to 35t / 77000 lbs operating weight: DSP-30 / DSP-30Extreme 20up to 50t / 110000 lbs operating weight: DSP-45 / DSP-45Extreme 20up to 65t / 143000 lbs operating weight: DSP-60 / DSP-60Extreme 20

Contractor Grabs

up to 54t / 118800 lbs operating weight, Contractor Grapple: CG 21

Rotating Combi Shears / Demolition Shears / Pulverisers

up to 25t / 55000 lbs operating weight, Combi Shear: DLC-25 22up to 35t / 77000 lbs operating weight, Combi Shear: DLC-30 22up to 50t / 110000 lbs operating weight, Combi Shear: DLC-45 22

up to 25t / 55000 lbs operating weight, Demolition Shear: DLD-25 22up to 35t / 77000 lbs operating weight, Demolition Shear: DLD-30 22up to 50t / 110000 lbs operating weight, Demolition Shear: DLD-45 22

up to 25t / 55000 lbs operating weight, Pulveriser: DLP-25 22up to 35t / 77000 lbs operating weight, Pulveriser: DLP-30 22up to 50t / 110000 lbs operating weight, Pulveriser: DLP-45 22up to 65t / 143000 lbs operating weight, Pulveriser: DLP-60 22

Rotating Combi Shears / Demolition Shears / Pulverisers with DemaPower

up to 25t / 55000 lbs operating weight, Combi Shear with DemaPower: DRC-25 23up to 35t / 77000 lbs operating weight, Combi Shear with DemaPower: DRC-30 23up to 50t / 110000 lbs operating weight, Combi Shear with DemaPower: DRC-45 23

up to 25t / 55000 lbs operating weight, Demolition Shear with DemaPower: DRD-25 23up to 35t / 77000 lbs operating weight, Demolition Shear with DemaPower: DRD-30 23up to 50t / 110000 lbs operating weight, Demolition Shear with DemaPower: DRD-45 23

up to 25t / 55000 lbs operating weight, Pulveriser with DemaPower: DRP-25 23up to 35t / 77000 lbs operating weight, Pulveriser with DemaPower: DRP-30 23up to 50t / 110000 lbsoperating weight, Pulveriser with DemaPower: DRP-45 23up to 65t / 143000 lbs operating weight, Pulveriser with DemaPower: DRP-60 23

Multi-Quick Processors for Demolition, Cutting & Separating with DemaPower 24

up to 25t / 55000 lbs operating weight: MQP-25 with DemaPower, five optional jaws 25up to 35t / 77000 lbs operating weight: MQP-30 with DemaPower, six optional jaws 25up to 50t / 110000 lbs operating weight: MQP-45 with DemaPower, six optional jaws 25up to 65t / 143000 lbs operating weight: MQP-60 with DemaPower, six optional jaws 25

Mobile Shears

up to 30t / 66000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-25-A 26




up to 50t / 110000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-60-B 26

up to 35t / 77000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-60-C 26


up to 65t / 143000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-75-B 26


up to 100t / 220000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-90-A 26up to 80t / 176000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-90-B 26



Summary Listed by Operating Weight of Excavator

Rotating Combi Shears / Demolition Shears / Pulverisers10 11 12 13 14 15 18 20 22 25 … 30 32 35 40 … 45 50 60 65 70 80 100

DLC-25 39600 44000 48400 55000DLC-30 48400 55000 ... 66000 70400 77000DLC-45 70400 77000 88000 ... 99000 110000DLD-25 39600 44000 48400 55000DLD-30 48400 55000 ... 66000 70400 77000DLD-45 70400 77000 88000 ... 99000 110000DLP-25 39600 44000 48400 55000DLP-30 48400 55000 ... 66000 70400 77000DLP-45 70400 77000 88000 ... 99000 110000DLP-60 99000 110000 132000 143000

Rotating Combi Shears / Demolition Shears / Pulverisers with DemaPower10 11 12 13 14 15 18 20 22 25 … 30 32 35 40 … 45 50 60 65 70 80 100

DRC-25 39600 44000 48400 55000DRC-30 48400 55000 ... 66000 70400 77000DRC-45 70400 77000 88000 ... 99000 110000DRD-25 39600 44000 48400 55000DRD-30 48400 55000 ... 66000 70400 77000DRD-45 70400 77000 88000 ... 99000 110000DRP-25 39600 44000 48400 55000DRP-30 48400 55000 ... 66000 70400 77000DRP-45 70400 77000 88000 ... 99000 110000DRP-60 99000 110000 132000 143000

Multi-Quick Processors with DemaPower10 11 12 13 14 15 18 20 22 25 … 30 32 35 40 … 45 50 60 65 70 80 100

MQP-25 39600 44000 48400 55000MQP-30 48400 55000 ... 66000 70400 77000MQP-45 70400 77000 88000 ... 99000 110000MQP-60 99000 110000 132000 143000

Static Pulverisers10 11 12 13 14 15 18 20 22 25 … 30 32 35 40 42 45 50 60 65 70 80

DSP-30 44000 48400 55000 ... 66000 70400 77000DSP-30Extr. 44000 48400 55000 ... 66000 70400 77000DSP-45Extr. 66000 70400 77000 88000 92400 99000 110000DSP-60 92400 99000 110000 132000 143000 154000DSP-60Extr. 92400 99000 110000 132000 143000

Mobile Shears10 11 12 13 14 15 18 20 22 25 … 30 32 35 40 … 45 50 60 65 70 80 100

DRS-25-A 30800 33000 39600 44000 48400 55000 ... 66000DRS-30-A 39600 44000 48400 55000 ... 66000 70400 77000DRS-45-A 55000 ... 66000 70400 77000 88000 ... 99000 110000DRS-60-A 66000 70400 77000 88000 ... 99000 110000 132000 143000DRS-60-B 66000 70400 77000 88000 ... 99000 110000DRS-60-C 55000 ... 66000 70400 77000DRS-75-A 77000 88000 ... 99000 110000 132000 143000 154000 176000DRS-75-B 77000 88000 ... 99000 110000 132000 143000DRS-75-C 66000 70400 77000 88000 ... 99000 110000DRS-90-A 99000 110000 132000 143000 154000 176000 220000DRS-90-B 99000 110000 132000 143000 154000 176000DRS-90-C 88000 ... 99000 110000 132000 143000 154000

Contractor Grabs20 21 25 26 27 28 29 30 … 35 36 37 38 39 40 … 45 … 48 … 50 … 54

CG 40 44000 46200CG 50 46200 55000 57200 59400 61600 63800CG 70 63800 66000 ... 77000 79200 81400 83600 85800 88000CG 100 88000 ... 99000 ... 105600 ... 110000 ... 118800

Legend:horizontal cylinder (H = horizontal)HPXdrive

DemaPowerothers

Type Operating Weight of Excavator (t / lbs)

Demolition and Sorting Grabs1 2 3 5 6 8 9 10 11 12 13 14 15 18 20 24 25 27 30 40 50 60 70 80 100

D02H 2200 4400D03HPX 6600D05HPX 6600 13200D09HPX 11000 17600 19800D12H-P 17600 19800 22000 24200 26400D15H 24200 26400 28600 30800 33000D15H-P 24200 26400 28600 30800 33000D15H-P HD 22000 24200 26400 28600 30800 33000 39600D16H-P HD 26400 28600 30800 33000 39600 44000D19H-P HD 26400 28600 30800 33000 39600 44000 52800D20H-P HD 28600 30800 33000 39600 44000 52800 55000D20H 30800 33000 39600 44000D20H-P 30800 33000 39600 44000D24H-P HD 33000 39600 44000 52800 55000 59400 66000D27H 39600 44000 52800 55000 59400D27H-P 39600 44000 52800 55000 59400D32H-P HD 44000 52800 55000 59400 66000 88000D40H-P HD 55000 59400 66000 88000 110000D50H-P HD 88000 110000 132000D70H-P HD 110000 132000 154000 176000

5-Finger Timber Grab1 2 3 5 8 9 10 11 12 13 14 15 18 20 24 25 27 30 40 50 60 70 80 100

D15H-T 24200 26400 28600 30800 33000D20H-T 30800 33000 39600 44000D27H-T 39600 44000 52800 55000 29400

Concrete Crusher2 4 5 6 7 10 11 12 13 14 15 18 20 24 27 30 40 50 60 70 80 100

DRC 520 8800 11000 13200 15400


Top Products now with Shorter Delivery Time

Ready-to-Mount and Optimally Adapted Complete Packages

Professional Tools for Professional UsersGUA

RANTEE

D Top Products now with Shorter Delivery Time


Professional Tools for Professional Users

Multi-Quick Processors page

MQP-25 Multi-Quick Processor complete package with rotation and bolt-on adapter

25


25


25

Mobile Shears

DRS-30-A Mobile shear complete package with rotation and bolt-on adapter

26


26


26


26


Demolition and Sorting Grabs with HPXdrive page

D05HPX-50 Demolition and sorting grab complete package with rotator, exchangeable cutting edges and non-return valve

13

D09HPX-60 Demolition and sorting grab complete package with rotator, exchangeable cutting edges and non-return valve

14




Professional Tools for Professional UsersGUARA

NTEED



Professional Tools for Professional Users

Heavy Duty Demolition and Sorting Grabs page

D15H-P-75HD Heavy duty demolition and sorting grab complete package with integrated rotation, exchangeable cutting edges and non-return valve

17


17


17


17


17


17

D40H-P-125HD Heavy duty demolition and sorting grab complete package with integrated rotation (2 motors), exchangeable cutting edges and non-return valve

17


D02H

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

Demolition and sorting grab for excavators with 1t / 2200 lbs to 2t / 4400 lbs operating weight – the universal tool for lighter demolition and sorting tasks of all kinds.

l Perforated skin of shells lets dust and gravel through. l Extremely robust due to the use of cutting edge material 500 HB steel.l Cutting edges usable both sides. l Integrated non-return valve guarantees secure retention of loads. l Precise positioning through mounted rotator with endless rotation.lHigh closing force achieved by horizontal cylinder (20 kN / 4400 lbf at 200 bar / 2880 psi operating pressure).

Demolition and Sorting Grab

Demolition and Sorting Grab D02H

Type Width Opening Height Volume Self weight Closing force OperatingE A C max. weight

(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kN/lbf ) (t/lbs)D02H 300 / 11.81 790 / 31.10 770 / 30.31 35 / 0.05 115 / 253 20 / 4400 1 - 2 / 2200 - 4400

Package consists of: demolition and sorting grab, KINSHOFER rotator, non-return valve, cutting edges

KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves. Type Upper connection Torque Moment of deflection

(bores/Ø-hole pattern) max. (mm/in) (Nm/ft.lbs) (Nm/ft.lbs)

KM 04 F140/150 10 x M 12 / Ø 150/5.91 850 / 630 3000 / 2215

Accessories

Type Description

KM 691 2t adapter connection plate for specific solutions – up to 2t / 4400 lbsKM 690 2t adapter for rigid mounting – up to 2t / 4400 lbsSW01 rigid bolt-on adapter for Lehnhoff grab exchange systemSW/MS01 with SW01 – up to 2t / 4400 lbs

adapter for quick exchange systems from other manufacturers available

Requirements of Excavator

Operating pressure (open/close): max. 20 MPa (200 bar) / 2880 psiRecommended oil flow (open/close): 10 - max. 40 l/min / 2.64 - max. 10.57 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM

Technical Drawings

A E

Cm

ax


D03HPX / D05HPX

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

Demolition and Sorting Grabs with HPXdrive

Demolition and Sorting Grabs D03HPX / D05HPXType Width Opening Height Volume Self Load Closing Operating

weight capacity force weightE A C max.

(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/ft.lbs) (t/lbs)D03HPX-40 400 / 15.75 975 / 38.39 820 / 32.28 60 / 15.85 295 / 649 1000 / 2200 26 / 5720 3 / 6600D05HPX-50 500 / 19.69 1135 / 44.69 920 / 36.22 100 / 26.42 300 / 660 1000 / 2200 24 / 5280 3 - 6 / 6600 - 13200


KINSHOFER RotatorsIntegrated in a single unit with the HPXdrive, no more connecting hoses. Continous rotation. Overload protection ensured by pressure relief valves.

Type Upper connection Torque Moment of deflection(width/Ø-hole pattern) max.

(mm/in) (Nm/ft.lbs) (Nm/ft.lbf )D03HPX: KM 06 F173/180 6 x M16 / Ø 180/7.09 1000 / 740 8500 / 6270D05HPX: KM 10 F173/180 6 x M16 / Ø 180/7.09 2000 / 1475 12000 / 8850

Accessories

Type Description

KM 691 8t adapter connection plate for specific solutions – up to 8t / 17600 lbsKM 690 8t adapter for rigid mounting – up to 8t / 17600 lbsOQ45 bolt-on-adapter for Oilquick OQ45 – 5t to 12t / 11000 lbs to 26400 lbsSW03 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS03 with SW03 – up to 5t / 11000 lbs

adapter for quick exchange systems from other manufacturers availableKM 980-2 2-8t solenoid valve for additional oil circuit, up to 26 MPa / 3744 psi, ready for mounting for self installationKM 980-2 2-8t c solenoid valve for additional oil circuit, up to 26 MPa / 3744 psi, incl. assembly parts and mounting

D03HPX

D05HPXD03HPX

Demolition and sorting grab with the maintenance-free HPXdrive for excavators up to 3t / 6600 lbs or 6t / 13200 lbs operating weight – the universal tool for all kind of light demolition and sorting work. l HPXdrive – the revolutionary concept for hydraulically operated grabs!

The rotation of the arms of the grab is generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston. No hydraulic cylinder required!

l 50% longer life cycle. The drive unit runs in a permanent oil bath – no lubrication necessary. Resistant against dirt and blows, due to the compact design.

l Constant closing forces during the entire operation.l Different applications possible through easy exchange system.l The perforated skin of the shells lets fine dust and gravel through –

without larger pieces blocking the shell filter system.l Integrated non-return valve guarantees secure retention of the loads.l Long life is ensured due to the use of 500 HB steel in the manufacture

of cutting edges (usable both sides).

420

E660 A

Cm

ax

11°

E

C m

ax

A


Operating pressure (open/close): D03 - D05: max. 32 MPa (320 bar) / 4608 psi; internal pressure 26 MPa (260 bar) / 3744 psiRecommended oil flow (open/close): D03 - D05: 40 - max. 75 l/min / 10.57 - max. 19.82 GPMOperating pressure (rotation): D03 - D05: max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): D03: 15 - max. 50 l/min / 3.96 - max. 13.21 GPM; D05: 20 - max. 50 l/min / 5.28 - max. 13.21 GPM

Technical Drawings


D09HPX

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

D09HPX

Demolition and sorting grab with the maintenance-free HPXdrive for excavators up to 9t / 19800 lbs operating weight – the universal tool for all kind of light demolition and sorting work. l HPXdrive – the revolutionary concept for hydraulically operated grabs!

The rotation of the arms of the grab is generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston. No hydraulic cylinder required!

l 50% longer life cycle. The drive unit runs in a permanent oil bath – no lubrication necessary. Resistant against dirt and blows, due to the compact design.

l Constant closing forces during the entire operation.l Different applications possible through easy exchange system.l The perforated skin of the shells lets fine dust and gravel through –

without larger pieces blocking the shell filter system.l Integrated non-return valve guarantees secure retention of the loads.l Long life is ensured due to the use of 500 HB steel in the manufacture

of cutting edges (usable both sides).

Demolition and Sorting Grab with HPXdrive

Demolition and Sorting Grab D09HPXType Width Opening Height Volume Self Load Closing Operating

weight capacity force weightE A C max.

(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/ft.lbs) (t/lbs)D09HPX-60 600 / 23.62 1400 / 55.12 1010 / 39.76 150 / 39.63 360 / 792 1000 / 2200 18 / 3960 5 - 9 / 11000 - 19800


KINSHOFER RotatorIntegrated in a single unit with the HPXdrive, no more connecting hoses. Continous rotation. Overload protection ensured by pressure relief valves.

Type Upper connection Torque Moment of deflection(width/Ø-hole pattern) max.

(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)KM 15 F273/273 10 x M16 / Ø 273/10.75 2000 / 1475 50000 / 36875

Accessories

Type Description

KM 691 8t adapter connection plate for specific solutions – up to 8t / 17600 lbsKM 690 8t adapter for rigid mounting – up to 8t / 17600 lbsOQ45 bolt-on-adapter for Oilquick OQ45 – 5t to 12t / 11000 lbs to 26400 lbsSW08 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS08 with SW08 – up to 12t / 26400 lbs

adapter for quick exchange systems from other manufacturers availableKM 980-2 2-8t solenoid valve for additional oil circuit, up to 26 MPa / 37.44 psi, ready for mounting for self installationKM 980-2 2-8t c solenoid valve for additional oil circuit, up to 26 MPa / 37.44 psi, incl. assembly parts and mounting


Operating pressure (Open/Close): max. 32 MPa (320 bar) / 4608 psi and internal working pressure of 26 MPa (260 bar) / 3744 psiRecommended oil flow (Open/Close): 40 - max. 75 l/min / 10.57 - max. 19.82 GPMOperating pressure (Rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (Rotation): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM

Technical Drawings

A

B

520

770

C


8 t 9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t

D15H / D20H / D27H Demolition and Sorting GrabsRobust multi purpose grab for excavators up to 15t / 33000 lbs / 20t / 44000 lbs / 27t / 59400 lbs operating weight – ideal for demolition and segmentation of all kinds of building materials. Ideal for separating building debris and similar material.

l The grab is available with rlbs or a perforated skin – both versions let fine dust and gravel through. The durable cutting edges can retain different materials, using the edge tips.l Long life is ensured due to the use of 500 HB steel in the manufacture of

replaceable cutting edges.l Robust, fully integrated rotation with sturdy slewing ring to withstand external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge.l Exceptional closing forces through two horizontally positioned hydraulic

cylinders that are protected by the bucket carrier.l Cylinders are hydraulically cushioned.

D20H

D27H

Demolition and Sorting Grabs with metal rlbs D15H / D20H / D27HType Width Opening Height Height Volume Weight Load

capacityClosing Torque Operating

weightE A C max. C min. force(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/Ibf ) (Nm/ft.lbs) (t/lbs)

D15H-80 800 / 31.50

1540 / 60.63

1210 / 47.64

1070 / 42.13

300 / 0.39

655 / 1441

4000 / 8800 36 / 7920 3000 /

2215 11-15 /

24200-33000

D20H-100 1000 / 39.37

1925 / 75.79

1450 / 57.09

1235 / 48.62

450 / 0.59

1050 / 2310

5000 / 11000 42 / 9240 4000 /

2950 14-20 /

30800-44000

D27H-115 1150 / 45.28

2140 / 84.25

1615 / 63.58

1410 / 55.51

800 / 1.05

1585 / 3487

6000 / 13200 63 / 13860 5000 /

3690 20-27 /

44000-59400Package consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valve

Accessories

Type Description

KM 690 15t adapter for rigid mounting – up to 15t / 33000 lbsKM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsKM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsOQ60 bolt-on adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbsOQ65 bolt-on adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbsOQ70 bolt-on adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbsOQ70/55 bolt-on adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbsSW10 rigid bolt-on adapter SW10 for Lehnhoff quick change system MS/HS10 for rigid mounting – up to 19t / 41800 lbsSW21 rigid bolt-on adapter SW21 for Lehnhoff quick change system MS/HS21 for rigid mounting – up to 28t / 61600 lbs

adapter for quick exchange systems from other manufacturers availableKM 685 09 E bolt on side platesKM 685 10 retrofitted plate to close backside for handling of small material

Requirements of ExcavatorOperating pressure (open/close): D15 - D20: max. 32 Mpa (320 bar) / 4608 psi; D27: max. 35 Mpa (350 bar) / 5040 psiRecommended oil flow (open/close): D15 - D27: 75 - max. 150 l/min / 19.82 - max. 39.63 GPMHydraulic connection (grab/rotate): D15 - D20: G 3/4“ / G 1/2“; D27: G 1“ / G 1/2“

Operating pressure (rotation): D15: max. 15 MPa (150 bar) / 2160 psi; D20 - D27: max. 17 MPa (170 bar) / 2448 psi

Recommended oil flow (rotation): D15 - D27: 25 - max. 60 l/min / 6.61 - max. 15.85 GPM

Technical Drawings

EA

C m

ax C m

in



D12H-P / D15H-P / D20H-P / D27H-P

D27H-P-115

Robust multi purpose grab for excavators up to 12t / 26400 lbs 15t / 33000 lbs / 20t / 44000 lbs / 27t / 59400 lbs operating weight – ideal for demolition and segmentation of all kinds of building materials. Ideal for separating building debris and similar material. l The grab is available with rlbs or a perforated skin – both versions let fine dust and gravel through. The durable cutting edges can retain different materials, using the edge tips.l Long life is ensured due to the use of 500 HB steel in the manufacture of

replaceable cutting edges.l Robust, fully integrated rotation with sturdy slewing ring to withstand external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge. (D12: KM 15 F273/273)l Exceptional closing forces through two horizontally positioned hydraulic


Demolition and Sorting Grabs with perforated shells D12H-P / D15H-P / D20H-P / D27H-PType Width Opening Height Height Volume Weight Load

capacityClosing Torque Operating

weightE A C max. C min. force(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/Ibf ) (Nm/ft.lbs) (t/lbs)

D12H-P-60 600 / 23.62 1550 / 61.02 1125 /

44.29980 / 38.58 225 / 0.29 470 / 1034 3000 /

6600 36 / 7920 3000 / 2215

8-12 / 17600-26400

D15H-P-80 800 / 31.50 1540 / 60.63 1210 /

47.641070 / 42.13 300 / 0.39 650 / 1430 4000 /

8800 36 / 7920 3000 / 2215

11-15 / 24200-33000

D20H-P-100 1000 / 39.37 1925 / 75.79 1450 /

57.091235 / 48.62 450 / 0.59 1020 / 2244 5000 /

11000 42 / 9240 4000 / 2950

14-20 / 30800-44000

D27H-P-115 1150 / 45.28 2140 / 84.25 1615 /

63.581410 / 55.51 800 / 1.05 1485 / 3267 6000 /

13200 63 / 13860 5000 / 3690

20-27 / 44000-59400

Package consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valve

Accessories Type Description


adapter for quick exchange systems from other manufacturers availableKM 685 09 E bolt on side platesKM 685 10 retrofitted plate to close backside for handling of small material

Requirements of ExcavatorOperating pressure (open/close): D12 - D20: max. 32 Mpa (320 bar) / 4608 psi; D27: max. 35 Mpa (350 bar) / 5040 psiRecommended oil flow (open/close): D12 - D27: 75 - max. 150 l/min / 19.82 - max. 39.63 GPMHydraulic connection (grab/rotate): D12 - D20: G 3/4“ / G 1/2“; D27: G 1“ / G 1/2“

Operating pressure (rotation): D12: max. 20 MPa (200 bar) / 2880 psi; D15: max. 15 MPa (150 bar) / 2160 psi; D20 - D27: max. 17 MPa (170 bar) / 2448 psi

Recommended oil flow (rotation): D12 - D27: 25 - max. 60 l/min / 6.61 - max. 15.85 GPM

Technical Drawings

Demolition and Sorting Grabs

EA

C m

axC m

in

D12H-P-60


D15H-P HD to D70H-P HD

10 t ... 15 t ... 19 t 20t 21t 22t 22t 23t 24t … 32t … 40 t … 50t … 80 t

Robust multi-purpose grab with perforated shells, for excavators from 10t / 22000 lbs up to 80t / 176000 lbs operating weight, the HD D Series grabs are ideal for demolition and sorting of all kinds of building materials. l Robust Delta-box frame with dust-proof axle bearing points.l Perforated shells let fine dust and gravel through without large

pieces getting caught. l Durable and reversable cutting edges, made of Cracox Plus 450 steel can be used to pick up different materials, with their tips.l Cutting edges on D19 series and higher can be turned three ways, reducing replacement costs.l Robust, fully integrated rotator with sturdy slewing ring to withstand

external forces, with pressure relief valve to ensure overload protection, and connecting hoses protected inside the hub.

l Exceptional closing forces achieved with a horizontally positioned hydraulic cylinder that is protected by the bucket carrier.

l Cylinder is hydraulically cushioned.

Heavy Duty Demolition and Sorting Grabs

Requirements of ExcavatorOperating pressure (open/close): D15 - D70: max. 35 MPa (350 bar) / 5040 psi

Recommended oil flow (open/close): D15 / D16: max. 80 l/min / max. 21.14 GPM; D19 - D24: max. 100 l/min / max. 26.42 GPM; D32 - D50: max.120 l/min / max. 31.70 GPM; D70: max. 200 l/min / max. 52.84 GPM

Hydraulic connection (grab/rotate): D15 - D24: G 3/4“ / G 1/2“; D32 - D50: G 1“ - 25S / G 1/2“; D70: G 1 1/4“ - 30SOperating pressure (rotation: D15 - D70: max. 14 Mpa (140 bar) / 2016 psiRecommended oil flow (rotation): D15 - D24: max. 40 l/min / max. 10.57 GPM; D32 - D70: 40 - max. 60 l/min / 10.57 - max. 15.85 GPMTechnical Drawings

Heavy Duty Demolition and Sorting Grabs with perforated shells D15H-P-75HD to D70H-P150HDType Width E Opening A Height C Volume Weight Load Closing force Torque Operating weight

(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/Ibf ) (Nm/ft.lbs) (t/lbs)

D15H-P-75HD 750 / 29.53

1730 / 68.11

1295 / 50.98

340 / 0.44

860 / 1892

5000 / 11000 43 / 9460 3000 /

221510 – 18 /

22000-39600

D16H-P-90HD 900 / 35.43

1730 / 68.11

1295 / 50.98

415 / 0.54

900 / 1980

5500 / 121000 43 / 9460 3000 /

221512 – 20 /

26400-44000

D19H-P-85HD 850 / 33.46

1755 / 69.09

1320 / 51.97

365 / 0.48

1030 / 2266

6500 / 14300 50 / 11000 3000/5700 /

2215/4205*12 – 24 /

26400-52800

D20H-P-100HD 1000 / 39.37

1895 / 74.61

1400 / 55.12

460 / 0.60

1120 / 2464

7000 / 15400 50 / 11000 3000/5700 /

2215/4205*13 – 25 /

28600-55000

D24H-P-100HD 1000 / 39.37

1990 / 78.35

1455 / 57.28

570 / 0.75

1315 / 2893

8000 / 17600 56 / 12320 3000/5700 /

2215/4205*15 – 30 /

33000-66000

D32H-P-110HD 1100 / 43.34

2195/ 86.42

1565 / 61.61

825 / 1.08

1820 / 4004

10500 / 23100 70 / 15400 7000 /

5165**20 – 40 /

44000-88000

D40H-P-125HD 1250 / 49.21

2355 / 92.72

1640 / 64.57

960 / 1.26

2210 / 4422

13500 / 29700 80 / 17600 7000 /

5165**25 – 50 /

55000 -110000

D50H-P-140HD 1400 / 55.12

2355 / 92.72

1650 / 64.96

1075 / 1.41

2330 / 5126

16500 / 36300 80 / 17600 7000 /

5165**35 – 60

7700-132000

D70H-P-150HD 1500 / 59.05

2730 / 107.38

1930 / 75.98

1660 / 2.17

4000 / 8800

23500 / 51700 140 / 30800 9000 /

6640**50 – 80 /

110000-176000Package consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valveOptional second heavy duty motor for D19H-P HD, D20H-P HD, D24H-P HDNotes: * optional with 2 motors for rotation ** second heavy duty hydraulic motor comes standard

Accessories Type DescriptionKM 690 15t adapters for rigid mounting – for excavators up to 15t / 33000 lbsKM 690 20t adapters for rigid mounting – for excavators up to 20t / 44000 lbsKM 690 27t adapters for rigid mounting – for excavators up to 27t / 59400 lbsKM 690 32t adapters for rigid mounting – for excavators up to 32t / 70400 lbsKM 690 40t adapters for rigid mounting – for excavators up to 40t / 88000 lbsKM 690 50t adapters for rigid mounting – for excavators up to 50t / 110000 lbsKM 690 70t adapters for rigid mounting – for excavators up to 70t / 154000 lbsOQ bolt-on adapter for Oilquick OQ – 5t up to 70t / 11000 lbs up to 154000 lbsSW rigid bolt-on adapter SW for Lehnhoff quick change system MS/HS for rigid mounting – from 2t / 4400 lbs up to 120t / 264000 lbs

adapters for quick exchange systems from other manufacturers available

D40H-P-125HD

D70H-P-150HD



D15H-T / D20H-T / D27H-T 5-Finger Timber Grab

D20H-5

The robust 5-finger timber grab combines the strength of the demolition and sorting grabs of the D-series with highly wear resistant timber grab tines. For excavators of up to 15t / 33000 lbs, 20t / 44000 lbs or 27t / 59400 lbs operating weight – ideal for forestry works, rolled lumber, special demolition tasks and pile foundations.

l Kinematics of tines avoids clamping of material - made of highly wear resistant material (HB 500).

l Branches with only 100mm diameter can be gripped firmly.l Robust, fully integrated rotation with sturdy slewing ring to withstand external forces and two motors. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge. l Exceptional closing forces through two horizontally positioned hydraulic


Timber Grab D15H-T / D20H-T / D27H-T

Type Width Opening Branch Ø Branch Ø Height Weight Load Closing Torque Operating weightE A D min. D max. C max. capacity force

(mm/in) (mm/in) (mm/in) (mm/in) (mm/in) (kg/lbs) (kg/lbs) (kN/lbf ) (Nm/ft.lbs) (t/lbs)

D15H-T 740 / 29.13 1100 / 43.31 100 / 3.94 500 / 19.69 1040 / 40.94 690 / 1518

3000 / 6600 37 / 8140 5700 /

4205 11 - 15 /

24200 - 33000

D20H-T 825 / 32.48 1800 / 70.87 100 / 3.94 580 / 22.83 1350 / 53.15 1045 / 2299

4000 / 8800 42 / 9240 5700 /

4205 14 - 20 /

30800 - 44000

D27H-T 1000 / 39.37 2100 / 82.68 125 / 4.92 700 / 27.56 1655 / 65.15 1665 / 3663

6000 / 13200 59 / 12980 5700 /

4205 18 - 27 /

39600 - 59400

Package consists of: timber grab, integrated rotation with sturdy slewing ring, and non-return valve

Accessories

Type Description


adapter for quick exchange systems from other manufacturers available

Requirements of ExcavatorD15H-T / D20H-T D27H-T

Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psi max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): 75 - max. 150 l/min / 19.82 - max. 39.63 GPM 75 - max. 150 l/min / 19.82 - max. 39.63 GPMHydraulic connection (grab/rotate): G 3/4“ / G 1/2“ G 1“ / G 1/2“Operating pressure (rotation): max. 17 Mpa (170 bar) / 2448 psi max. 17 Mpa (170 bar) / 2448 psiRecommended oil flow (rotation): 25 - max. 60 l/min / 6.61 - max. 15.85 GPM 25 - max. 60 l/min / 6.61 - max. 15.85 GPM

Technical Drawings

D20H-T

D min

D maxA

C m

ax

E


40 t1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t … 15 t … 20 t … 30 t …

DRC 520Concrete Crusher

DE

F

B

C m

ax.

Kinshofer concrete crusher DRC 520 for excavators up to 7t / 15400 lbs operating weight is extremely productive and strong.Able to crush concrete and cut through steel reinforcements, the DRC 520 crusher can be used for both, primary and secondary demolition.l Most appropriate for interior demolition jobs.l Crushes concrete of 54 cm / 21.26 in thickness.l Cuts steel reinforcements of 28 mm / 1.10 in diameter.l Stable steel flanks.l Optional: additional breaking teeth for thinner walls.l Replaceable breaker tips and reinforcement cutting blades made of of high tensile steel HB 500.l Crushing force independent of excavator‘s hydraulic pressure by means of hydraulic booster.l Pivot bearing for 360° endless rotation.

Concrete Crusher DRC 520 Type Operating

weightWeight Shearing capacity Cutting force Cutting

(w/o / with (with breaking tips (of the reinforcing capacityadapter plate) on opened crusher) rod cutter) ( max.)

(t/lbs) (kg/lbs) (kN/Ibf ) (kN/Ibf ) (mm/in)

DRC 520 4 - 7 / 8800 - 15400 350/405 / 770/891 466 / 102520 1659 / 364980 28 / 1.10

DimensionsType Height Width Depth Jaw width Jaw depth

C max. (w/o adapter plate) B D F(mm/in) (mm/in) (mm/in) (mm/in) (mm/in)

DRC 520 960 / 37.80 925 / 36.42 400 / 15.75 540 / 21.26 195 / 7.68

HydraulicsType Opening/Closing Operating cycle (at 70 l/min)

Release pressure Operating pressure Flow rate max. Opening Closingmin. - max. (MPa/psi) (MPa/psi) (l/min/GPM) (sec)

DRC 520 18 - 27 / 2592 - 3888 psi 50 / 7200 psi 100 / 26.42 2,1 2,5

AccessoriesType DescriptionCP 520 (optional) additional breaking teeth (2 pcs.)

Technical Drawings


65 t15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t … 35 t … 50 t …

DSP Static PulverisersDesigned for secondary demolition, Kinshofer static Pulverisers (standard or Extreme version) can both break up reinforced concrete structures and separate the steel.Up to 20% additional power and fast cycle times are achieved using the patented DemaPower cylinder concept for the Extreme version.

Advantages:l DemaPower achieves optimal speed and power (Extreme version).l All teeth and scrapers are exchangeable.l Exchangeable ground tooth plate and shrouds.l Bearing points are engineered for optimum load handling and reduced wear.l Integrated dual action speed valve.l Optional: exchangeable cutting blades.l Wear parts are exchangeable on site.

Static Pulverizers DSP & DSP-ExtremeType Operating weight Self weight Closing force *

excavator (t/lbs) (kg/lbs) (t)DSP-30 20-35 / 44000-77000 2135 / 4695 80DSP-30Extreme 20-35 / 44000-77000 2115 / 4650 100DSP-45 30-50 / 66000-110000 2670 / 5875 110DSP-45Extreme 30-50 / 66000-110000 2645 / 5820 130DSP-60 42-65 / 92400-143000 3570 / 7855 110DSP-60Extreme 42-65 / 92400-143000 3525 / 7755 150

DimensionsType Jaw opening Width Width Height Jaw depth Length lower jaw B upper jaw cutting blades

A C D E **(mm/in) (mm/in) (mm/in) (mm/in) (mm/in) (mm/in)

DSP-30 885 / 34.84 490 / 19.29 350 / 13.78 2145 / 84.45 840 / 33.07 200 / 7.87DSP-30Extreme 885 / 34.84 490 / 19.29 350 / 13.78 2145 / 84.45 840 / 33.07 200 / 7.87DSP-45 1015 / 39.96 525 / 20.67 400 / 15.75 2360 / 92.91 900 / 35.43 200 / 7.87DSP-45Extreme 1015 / 39.96 525 / 20.67 400 / 15.75 2360 / 92.91 900 / 35.43 200 / 7.87DSP-60 1135 / 44.69 565 / 22.24 450 / 17.72 2635 / 103.74 1000 / 39.37 200 / 7.87DSP-60Extreme 1135 / 44.69 565 / 22.24 450 / 17.72 2635 / 103.74 1000 / 39.37 200 / 7.87

HydraulicsType Open/Close Cycle times

Pressure max. Recommended oil flow (open/close)(bar/psi) (l/min/GPM) (sec)

DSP-30 380 / 5472 150 - max. 250 / 39.63 - max. 66.05 2,5/ 2,5DSP-30Extreme 380 / 5472 150 - max. 250 / 39.63 - max. 66.05 2,0/ 2,3DSP-45 380 / 5472 200 - max. 300 / 52.84 - max. 79.26 2,6/ 2,9DSP-45Extreme 380 / 5472 200 - max. 300 / 52.84 - max. 79.26 2,0/ 2,9DSP-60 380 / 5472 300 - max. 400 / 79.26 - max. 105.68 2,6/ 2,8DSP-60Extreme 380 / 5472 300 - max. 400 / 79.26 - max. 105.68 2,0/ 2,8

* closing force measured at front tooth ** optional, not included in our standard package

Technical Drawings


CG

16 t ... 20 t 21 t ... 25 t ... 29 t 30 t ... 35 t … 40 t … 50 t 51 t 52 t 53 t 54 t

Contractor GrappleBeing a robust mechanical contractor grab with five strong, interlocking tines - for excavators from 16t / 35200 lbs up to 54t /118800 lbs operating weight - the CG-series grapples are ideal for demolition, material handling and sorting of all kinds such as rocks, scrap and other debris.

l No additional hydraulics required.l Available as pin-on attachment (fixed mount) or with pin-grabber coupler (quick hitch).l Wear-resistant fine grain steel in the construction of shell interior and tines.l Mounting pad and positioning arm included.l Curved jaws allow for an easy handling of bulky material and a better penetration and release of scrap and other debris. l Large opening range.l Weld in replaceable tine tips.

Contractor GrapplesType Opening Dimension Upper jaw width Lower jaw width Weight Operating weight

range A D E min E max(mm/in) (mm/in) (mm/in) (mm/in) (kg/lbs) (t/lbs)

CG 40 2500 / 98 195 / 7 711 / 28 1016 / 40 1130 / 2491 16 – 21 / 35 - 46000CG 50 2800 / 111 254 / 10 762 / 30 1118 / 44 1500 / 3306 21 – 29 / 46 - 65000CG 70 3098 / 122 305 / 12 813 / 32 1220 / 48 1800 / 4290 29 – 40 / 65 - 88000CG 100 3420 / 134 305 / 12 900 / 35 1320 / 55 2300 / 5010 40 – 54 / 88 - 118800

Package consists of: contractor grapple, positioning arm, mounting pad

Technical Drawings


15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t 32 t 35 t … 50 t … 65 t

DLC / DLD / DLP

DLC 25

Rotating ShearsThe rotating demolition tools of the new Dedicated Demolition Line have been developed for primary and secondary demolition. Their jaws are designed for each application area within a demolition job site: Combi Crusher DLC, Demolition Crusher DLD or Pulveriser DLP.

Advantages:l Powerful cylinder with robust pin suspension.l Cylinder in two chamber technique with speed valve.l Rotation with additional oil passage.l Twin rotation motors for extra rotation power.l Swing bearing double pivoted.l Rotation circuit filters.l Teeth, shrouds and cutting blades exchangeable.l Excellent speed/ power to weight ratio.l DLP: exchangeable ground tooth-plate.

DLC-25Combi-Crusher

DLD-25Demolition Crusher

DLP-25Pulveriser

DLD-25

Rotating Combi Crusher DLC Type Operating

weight excavator

Weight Jaw opening Width Width Height Jaw depth Length Closing force lower jaw

Bupper jaw cutting blades front tooth /

A C D E splitting tooth(t/lbs) (kg/lbs) (mm/in) (mm/in) (mm/in) (mm/in) (mm/in) (mm/in) (t/lbs)

DLC-25 18 - 25 / 39600-55000

1880 / 4135

785 / 30.91

390 / 15.35

90 / 3.54 1995 / 78.54 800 /

31.50400 / 15.75

70/100 /154000/220000

DLC-30 22 - 35 / 48400-77000

2455 / 5400

875 / 34.45

455 / 17.91

100 / 3.94 2150 / 84.65 900 /

35.43400 / 15.75

80/125 / 176000/275000

DLC-45 32 - 50 / 70400-110000

3085 / 6785

980 / 38.58

470 / 18.50

100 / 3.94 2365 / 93.11 990 /

38.98500 / 19.69

110/150 /242000/330000

Rotating Demolition Crusher DLD Type Operating

weight excavator




DLD-25 18 - 25 / 39600-55000

1905 / 4190

825 / 32.48

390 / 15.35

90 / 3.54

2035 / 80.12

800 / 31.50

200 / 7.87

75/120 /165000/264000

DLD-30 22 - 35 / 48400-77000

2450 / 5390

870 / 34.25

450 / 17.72

100 / 3.94

2155 / 84.84

885 / 34.84

200 / 7.87

85/135 /187000/297000

DLD-45 32 - 50 / 70400-110000

3110 / 6840

990 / 38.98

470 / 18.50

100 / 3.94

2360 / 92.91

945 / 37.20

200 / 7.87

110/160 /242000/352000

Rotating Pulverizer DLP Type Operating

weight excavator




DLP-25 18 - 25 / 39600-55000

1920 / 4225

790 / 31.10

390 / 15.35

325 / 12.80

2035 / 80.12

800 / 31.50

200 / 7.87

70/100 /154000/220000

DLP-30 22 - 35 / 48400-77000

2425 / 5335

860 / 33.86

450 / 17.72

350 / 13.78

2155 / 84.84

885 / 34.84

200 / 7.87

80/125 / 176000/275000

DLP-45 32 - 50 / 70400-110000

3150 / 6930

985 / 38.78

470 / 18.50

400 / 15.75

2360 / 92.91

945 / 37.20

200 / 7.87

110/150 /242000/330000

DLP-60 45 - 65 / 99000-143000

4100 / 9020

1150 / 45.28

565 / 22.24

450/ 17.72

2550 / 100.39

1020 / 40.16

250 / 7.87

125/185 /275000/407000

HydraulicsType Open/Close Rotation Cycle times

Pressure max. Recommended oil flow Pressure max. Recommended oil flow (open/close)(bar/psi) (l/min/GPM) (bar/psi) (l/min/GPM)

DLC-25 / DLD-25 / DLP-25 380 / 5472 120 - max. 200 / 31.70 - max. 52.84 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 2,5 / 2,5DLC-30 / DLD-30 / DLP-30 380 / 5472 150 - max. 250 / 39.63 - max. 66.05 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 2,5 / 2,5DLC-45 / DLD-45 / DLP-45 380 / 5472 200 - max. 300 / 52.84 - max. 79.26 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 2,6 / 2,9DLP-60 380 / 5472 300 - max. 400 / 79.26 - max. 105.68 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 2,6 / 2,8

Technical Drawings


15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t 32 t 35 t … 50 t … 65 t

DRC / DRD / DRP

DRP 45

DRD-25

Rotating Shears with DemaPowerThe rotating demolition tools of the new Dedicated Demolition Line have been developed for primary and secondary demolition. Their jaws are designed to each application area within a demolition job site: Combi Crusher DRC, Demolition Crusher DRD or Pulveriser DRP. The patented DemaPower cylinder concept provides up to 20% more power and obviously quicker cycle times.

Advantages:l Maximized working speed with the DemaPower cylinder and robust

pin suspension, four chamber technique and speed valve.l Rotation head with additional oil passage.l Twin rotation motors for extra rotation power.l Swing bearing double pivoted.l Rotation circuit filters.l Teeth, shrouds and cutting blades exchangeable.l Excellent speed/ power to weight ratio.l DRP: exchangeable ground tooth-plate.

DRC-25Combi-Crusher

DRD-25Demolition Crusher

DRP-25Pulveriser

Rotating Combi Crusher DRC Type Operating

weight excavator




DRC-25 18 - 25 / 39600-55000

1880 / 4135

785 / 30.91

390 / 15.35

90 / 3.54 1995 / 78.54 800 /

31.50400 / 15.75

85/120 /187000/264000

DRC-30 22 - 35 / 48400-77000

2440 / 5370

875 / 34.45

455 / 17.91

100 / 3.94 2150 / 84.65 900 /

35.43400 / 15.75

100/150 /220000/330000

DRC-45 32 - 50 / 70400-110000

3060 / 6730

980 / 38.58

470 / 18.50

100 / 3.94 2365 / 93.11 990 /

38.98500 / 19.69

130/185 /286000/407000

Rotating Demolition Crusher DRD Type Operating

weight excavator




DRD-25 18 - 25 / 39600-55000

1905 / 4190

825 / 32.48

390 / 15.35

90 / 3.54

2035 / 80.12

800 / 31.50

200 / 7.87

90/145 /198000/319000

DRD-30 22 - 35 / 48400-77000

2435 / 5355

870 / 34.25

450 / 17.72

100 / 3.94

2155 / 84.84

885 / 34.84

200 / 7.87

105/160 /231000/352000

DRD-45 32 - 50 / 70400-110000

3085 / 6785

990 / 38.98

470 / 18.50

100 / 3.94

2360 / 92.91

945 / 37.20

200 / 7.87

130/195 /286000/429000

Rotating Pulverizer DRP Type Operating

weight excavator




DRP-25 18 - 25 / 39600-55000

1910 / 4200

790 / 31.10

390 / 15.35

325 / 12.80

1980 / 77.95

800 / 31.50

200 / 7.87

85/130 /187000/286000

DRP-30 22 - 35 / 48400-77000

2410 / 5300

860 / 33.86

450 / 17.72

350 / 13.78

2155 / 84.84

885 / 34.84

200 / 7.87

100/150 /220000/330000

DRP-45 32 - 50 / 70400-110000

3125 / 6875

980 / 38.58

470 / 18.50

400 / 15.75

2360 / 92.91

945 / 37.20

200 / 7.87

130/185 /286000/407000

DRP-60 45 - 65 / 99000-143000

4100 / 9020

1150 / 45.28

565 / 22.24

450/ 17.72

2550 / 100.39

1020 / 40.16

250 / 7.87

150/205 /330000/451000

HydraulicsType Open/Close Rotation Cycle times

Pressure max. Recommended oil flow Pressure max. Recommended oil flow (open/close)(bar/psi) (l/min/GPM) (bar/psi) (l/min/GPM)

DRC-25 / DRD-25 / DRP-25 380 / 5472 120 - max. 200 / 31.70 - max. 52.84 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 2,0 / 2,3DRC-30 / DRD-30 / DRP-30 380 / 5472 150 - max. 250 / 39.63 - max. 66.05 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 2,0 / 2,5DRC-45 / DRD-45 / DRP-45 380 / 5472 200 - max. 300 / 52.54 - max. 79.26 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 2,0 / 2,9DRP-60 380 / 5472 300 - max. 400 / 79.26 - max. 105.68 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 2,0 / 2,8

Technical Drawings


15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t … 35 t … 50 t … 65 t

MQP

UNIQUE JAW EXCHANGE SYSTEMFast. Easy. Safe.

Jaw Options:

Rotation with additional oil passage

Rotation circuit filters

Twin rotation motors

All wear parts are exchangeable on site

Guide plate at pivot point for more precise alignment and greater jaw stability

The patented DemaPower cylinder concept provides up to 20% more power and extremely fast cycle times

With the incorporated DemaLink the jaw set can be exchanged on site in less than 10 minutes

Exchanging Jaws

(Combi style shown)

Multi-Quick Processor

Steel JawsPulveriser JawsCombi Jaws Demolition Jaws Tank Jaws Universal Jaws


15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 27 t … 35 t 40 t 50 t … 65 t15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t … 35 t … 50 t … 65 t

MQPUsed for cutting and crushing concrete with steel reinforcement and cutting steel structures, the Kinshofer Multi-Quick Processor with DemaPower and DemaLink was developed for primary and secondary demolition. It has six convenient jaw options:Combi, Demolition, Pulveriser, Steel, Tank and Universal jaws

l The patented DemaPower cylinder provides up to 20% more power and reduces cycle times to under 5 seconds.l Rotation circuit filters.l Rotation head with additional oil passage.l Twin rotation motors for extra rotation power.l Guide plate at pivot point for more precise alignment and greater jaw stability.l All teeth and cutting blades are exchangeable.l Bearing points engineered for optimum load handling and reduced wear.l With the integrated DemaLink the jaw set can be exchanged on site in less than 10 minutes.

Multi-Quick Processor

MQP with Pulveriser Jaws

MQP with Combi Jaws

Requirements of Excavator Technical DrawingsOperating pressure (open/close): max. 38 MPa (380 bar) / 5472 psiRecommended oil flow (open/close): MQP-25 120 - max. 200 l/min / 31.70 - max. 52.84 GPM MQP-30 150 - max. 250 l/min / 39.63 - max. 66.05 GPM MQP-45 200 - max. 300 l/min / 52.84 - max. 79.26 GPM MQP-60 300 - max. 400 l/min / 79.26 - max. 105.68 GPM

Operating pressure (rotation): max. 14 MPa (140 bar) / 2016 psiRecommended oil flow (rotation): 40 - max. 60 l/min / 10.57 - max. 15.85 GPM

Multi-Quick Processors / MQP completeType Weight Weight

(upper & lower jaws)

Closing Jaw Width lower jaw

Width upper jaw

Height Jaw depth(complete force * openingwith yoke) A B C D E

Combi Jaws: (kg/lbs) (kg/lbs) (t/lbs) (mm/in) (mm/in) (mm/in) (mm/in) (mm/in)MQP-25-C 2060 / 4532 845 / 1860 85 / 187000 785 / 30.91 375 / 14.76 90 / 3.54 1940 / 76.38 810 / 31.89MQP-30-C 2680 / 5896 1190 / 2620 100 / 220000 870 / 34.25 440 / 17.32 100 / 3.94 2155 / 84.84 920 / 36.22MQP-45-C 3365 / 7403 1540 / 3390 130 / 286000 980 / 38.58 450 / 17.72 100 / 3.94 2360 / 92.91 990 / 38.98MQP-60-C 4525 / 9955 2085 / 4590 150 / 330000 1150 / 45.28 480 / 18.90 100 / 3.94 2600 / 102.36 1050 / 41.34

Demolition Jaws:MQP-25-D 2085 / 4587 870 / 1915 90 / 198000 815 / 32.09 460 / 18.11 90 / 3.54 1980 / 77.95 810 / 31.89MQP-30-D 2690 / 5918 1200 / 2640 100 / 220000 870 / 34.25 470 / 18.50 100 / 3.94 2160 / 85.04 900 / 35.43MQP-45-D 3405 / 7491 1580 / 3475 130 / 286000 990 / 38.98 515 / 20.28 100 / 3.94 2355 / 92.72 960 / 37.80MQP-60-D 4495 / 9889 2055 / 4520 150 / 330000 1175 / 46.26 550 / 21.65 100 / 3.94 2620 / 103.15 1090 / 42.91

Pulveriser Jaws:MQP-25-P 2100 / 4620 885 / 1950 85 / 187000 790 / 31.10 400 / 15.75 325 / 12.80 1980 / 77.95 810 / 31.89MQP-30-P 2665 / 5863 1175 / 2585 100 / 220000 880 / 34.65 470 / 18.50 350 / 13.78 2165 / 85.24 830 / 32.68MQP-45-P 3450 / 7590 1625 / 3575 130 / 286000 980 / 38.58 515 / 20.28 400 / 15.75 2355 / 92.72 945 / 37.20MQP-60-P 4565 / 7590 2125 / 4675 150 / 330000 1150 / 45.28 550 / 21.65 450 / 17.72 2620 / 103.15 1090 / 42.91

Steel Jaws:MQP-25-S 1985 / 4367 770 / 1695 300 / 660000 370 / 14.57 320 / 12.60 100 / 3.94 1750 / 68.90 560 / 22.05MQP-30-S 2460 / 5412 970 / 2135 340 / 748000 410 / 16.14 355 / 13.98 120 / 4.72 1910 / 75.20 600 / 23.62MQP-45-S 3130 / 6886 1305 / 2870 415 / 913000 465 / 18.31 375 / 14.76 120 / 4.72 2105 / 82.87 700 / 27.56MQP-60-S 4315 / 9493 1875 / 4125 465 / 1023000 540 / 21.26 410 / 16.14 120 / 4.72 2335 / 91.93 750 / 29.53

Tank Jaws:MQP-25-T 2130 / 4686 915 / 2015 295 / 649000 330 / 12.99 265 / 10.43 100 / 3.94 1965 / 77.36 570 / 22.44MQP-30-T 2710 / 5962 1220 / 2684 360 / 792000 335 / 13.19 305 / 12.01 120 / 4.72 2070 / 81.50 575 / 22.64MQP-45-T 3320 / 7304 1495 / 3290 460 / 1012000 390 / 15.35 305 / 12.01 120 / 4.72 2275 / 89.57 630 / 24.80MQP-60-T 4460 / 9812 2020 / 4445 655 / 1441000 400 / 15.75 355 / 13.98 150 / 5.91 2415 / 95.08 660 / 25.98

Universal Jaws:MQP-30-U 2640 / 5808 1150 / 2530 110 / 242000 590 / 23.23 500 / 19.69 280 / 11.02 2040 / 80.31 790 / 31.10MQP-45-U 3195 / 7029 1370 / 3015 145 / 319000 670 / 25.40 525 / 20.67 310 / 12.20 2225 / 87.60 830 / 32.68MQP-60-U 4425 / 9735 1985 / 4367 180 / 396000 820 / 32.28 590 / 23.23 340 / 13.39 2470 / 97.24 880/ 34.65* closing force for C-, D-, P- and U-jaw measured at front tooth, for S- and T-jaw measured at mid point of inner blade

Multi-Quick Processors / individual yokeType Operating weight

excavatorWeight Height Width Depth Cycle times

(open / close)(t/lbs) (kg/lbs) (mm/in) (mm/in) (mm/in) (sec)

MQP-25-Y 18 - 25 / 39600 - 55000 1215 / 2675 1150 / 45.27 640 / 25.20 1140 / 44.88 1,5 / 2,3MQP-30-Y 22 - 35 / 48400 - 77000 1490 / 3280 1205 / 47.44 720 / 28.35 1195 / 47.05 2,0 / 2,3MQP-45-Y 32 - 50 / 70400 - 110000 1825 / 4015 1345 / 54.13 720 / 28.35 1290 / 50.79 2,0 / 2,9MQP-60-Y 45 - 65 / 99000 - 143000 2440 / 5370 1450 / 57.09 880 / 34.65 1485 / 58.46 2,0 / 2,8


DRS

14 t …20 t … 25 t 30 t … 50 t … 65 t … 75 t 80 t 90 t 100 t…

The Kinshofer DRS Mobile Shear with its 360° rotation has been engineered to achieve an optimal power to weight ratio. This robust tool can be used for a wide variety of jobs including concrete and steel structural demolition, scrap yards, conditioning of industrial mixed scrap and even processing steel-reinforced concrete. With three different mounting options, the DRS line is available in five different sizes, suitable for excavators from 14t / 30800 lbs to 100t / 220000 lbs operating weight. l Powerful cylinder with speed valve – fully protected in the housing.l Housing made of extremely resistant special steel.l Heavy duty bearings for reduced bushing wear – without allowance.l Very high cutting force: optimal power to weight ratio. Robust mouth.l Optimal mouth design with large opening for scrap and concrete.l More cutting force by displaced angles of the two cutting blades.l All wear cutting blades can be turned four times and – whenever material gets jammed – be loosened from outside.l Exchangeable, weldable piercing tip.l Heavy duty 360° rotation with oversized slewing ring, driven by (two) motors. Also available without rotation.

Mobile Shears with 360° Rotation

525

150

830

720

1685

4100

1165

A

C

B

DRS-75-A

Mobile Shears with 360° Rotation DRS / rigid mount (without Rotation)Type Weight Length A Jaw opening Jaw depth Primary Cutting force* Operating Operating

(w/o adapter) (w/o adapter) B C cutter length weight (boom) weight (dipper)(kg/lbs) (mm/in) (mm/in) (mm/in) (mm/in) (kN/lbf ) (t/lbs) (t/lbs)

DRS-25-A 2150 / 4730 2740 / 107.87 500 / 19.69 460 / 18.11 180/280 / 7.09/11.02 4975 / 1094500 14 - 20 / 30800 - 44000

20 - 30 /44000 - 66000

DRS-30-A 3100 / 6820 2975 / 117.13 580 / 22.83 490 / 19.29 200/300 / 7.87/11.81 6750 / 1485000 18 - 25 /39600 - 55000

25 - 35 / 55000 - 77000

DRS-45-A 4100 / 9020 3290 / 129.53 625 / 24.61 540 / 21.26 225/330 / 8.89/12.99 8210 / 1806200 25 - 35 / 55000 - 77000

32 - 50 /70400 - 110000

DRS-60-A 5550 / 12210 3725 / 146.65 720 / 28.35 620 / 24.41 250/380 / 9.84/14.96 10990 / 2417800 30 - 50 /66000 - 110000

45 - 65 / 99000 - 143000

DRS-60-B 5640 / 12410 4135 / 162.80 720 / 28.35 620 / 24.41 250/380 / 9.84/14.96 10990 / 2417800 30 - 50 /66000 - 110000 -

DRS-60-C 4850 /10670 3285 / 129.33 720 / 28.35 620 / 24.41 250/380 / 9.84/14.96 10990 / 2417800 25 - 35 /55000 - 77000 -

DRS-75-A 6950 / 15290 4085 / 160.83 825 / 32.48 720 / 28.35 300/440 / 11.81/17.32 14270 / 3139400 35 - 65 / 77000 - 143000

60 - 80 / 132000 - 176000

DRS-75-B 7050 / 15510 4575 / 180.12 825 / 32.48 720 / 28.35 300/440 / 11.81/17.32 14270 / 3139400 35 - 65 / 77000 - 143000 -

DRS-75-C 6200 / 13640 3660 / 144.10 825 / 32.48 720 / 28.35 300/440 / 11.81/17.32 14270 / 3139400 30 - 50 /66000 - 110000 -

DRS-90-A 8500 / 18700 4800 / 188.98 960 / 37.80 815 / 32.09 350/480 / 13,78/18.90 19450 / 4279000 45 - 80 /99000 - 176000

75 - 100 /165000 - 220000

DRS-90-B 8600 / 18920 4920 / 193.70 960 / 37.80 815 / 32.09 350/480 / 13,78/18.90 19450 / 4279000 45 - 80 /99000 - 176000 -

DRS-90-C 7700 / 16940 4005 / 157.68 960 / 37.80 815 / 32.09 350/480 / 13,78/18.90 19450 / 4279000 40 - 70 / 88000 - 154000 -

*cutting force calculated at a distance of 120 mm / 4.72 in (DRS-25) / 140 mm / 5.51 in (DRS-30) / 160 mm / 6.30 in (DRS-45 to DRS-90) from center of pin

HydraulicsType Open/ Close Rotate Back pressure Working cycle

Pressure max. Recommended oil flow Pressure max. Recommended oil flow max. open/close(bar/psi) (l/min / GPM) (bar/psi) (l/min / GPM) (bar/psi) (sec)

DRS-25 380 / 5472 150 - max. 250 / 39.63 - max. 66.05 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 - 2.4 / 2.3DRS-30 380 / 5472 200 - max. 300 / 52.84 - max. 79.26 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 - 2.9 / 3.0DRS-45 380 / 5472 300 - max. 400 / 79.26 - max. 105.68 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 - 3.7 / 2.2

DRS-60 380 / 5472 400 - max. 600 / 105.68 - max. 158.52 200 / 2880 max. 60 / 15.85 10 / 144

(drain line required) 3.0 / 2.2

DRS-75 380 / 5472 600 - max. 800 / 158.52 - max. 211.36 200 / 2880 max. 60 / 15.85 10 / 144


DRS-90 380 / 5472 700 - max. 1000 / 184.94 - max. 264.20 200 / 2880 max. 60 / 15.85 10 / 144


Technical Drawings


DRS-75-C

non-rotating, for mount on boom with a weld-on adapter**

DRS-75-B

rotating, for mount on boom with a weld-on adapter**

DRS-75-A

rotating, for mount on dipper or boom with a bolt-on adapter**

**note: adapters are not inclusive

Technical Drawings

14 t …20 t … 25 t 30 t … 50 t … 65 t … 75 t 80 t 90 t 100 t…

DRSPerformance DataType Narrow Middle Narrow Middle Wide

I-beam I-beam H-beam H-beam H-beamDRS-25 IPE 450 INP 320 HEA 280 HEB 200 HEM 100DRS-30 IPE 500 INP 400 HEA 340 HEB 260 HEM 140DRS-45 IPE 600 INP 450 HEA 400 HEB 300 HEM 160DRS-60 IPE 700 INP 500 HEA 500 HEB 360 HEM 180DRS-75 IPE 800 INP 550 HEA 600 HEB 400 HEM 200DRS-90 IPE 900 INP 600 HEA700 HEB 450 HEM 220

Type Round Hot rolled Hot rolled Sheet steel Steel tubeangle steel round steel square steel thickness Ø x thickness

DRS-25 200 x 200 x 15 / 7.87 - 7.87 x 0.59 Ø 75 / 2.95 65 x 65 / 2.56 x 2.56 15 / 0.59 254 x 9 (16“) / 10.00 x 0.35DRS-30 250 x 250 x 20 / 9.84 x 9.84 x 0.79 Ø 90 / 3.54 80 x 80 / 3.15 x 3.15 20 / 0.79 304 x 10 (12“) / 11.97 x 0.39DRS-45 250 x 250 x 25 / 9.84 x 9.84 x 0.98 Ø 100 / 3.94 90 x 90 / 3.54 x 3.54 25 / 0.98 406 x 10 (16“) / 15.98 x 0.39DRS-60 300 x 300 x 25 / 11.81 x 11.81 x 0.98 Ø 115 / 4.53 100 x 100 / 3.94 x 3.94 25 / 0.98 457 x 10 (18“) / 17.99 x 0.39DRS-75 300 x 300 x 30 / 11.81 x 11.81 x 1.18 Ø 130 / 5.12 120 x 120 / 4.72 x 4.72 30 / 1.18 559 x 10 (22“) / 22.01 x 0.39DRS-90 350 x 350 x 30 / 13.78 x 13.78 x 1.18 Ø 150 / 5.91 135 x 135 / 5.31 x 5.31 35 / 1.38 609 x 10 (24“) / 23.98 x 0.39Dimensions: standardized wide flange beams (HEA, HEB, HEM) and section steel (IPE, INP) according to DIN EN 10 034 or cross section / sheet thickness in mm / in

Note: The capability to cut the above profiles assumes the tensile strength of the steel 370 N/mm² as well as the shear operating pressure of 350 bar / 5040 psi. In borderline cases, we recommend an actual test cut is made to determine whether the profile in question can be cut. Larger beams can be often cut in two steps.

Mobile Shears with 360° Rotation

We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany

Upfront, everywhereKINSHOFER is an ISO 9001 certified Company. DVS ZERT is a registred trademark of DVS ZERT® e.V., Düsseldorf.

www.kinshofer.com

EXA

-KIN

-DEM

-E-0

115Hauptsitz Deutschland:

Kinshofer GmbHHauptstrasse 7683666 WaakirchenTel.: +49 (0)8021 – 88 99 0Fax: +49 (0)8021 – 88 99 37Email: [email protected]

United Kingdom:Kinshofer UK Ltd.4 Milton Industrial CourtHorsfield Way, BredburyStockport, Cheshire, SK6 2TATel.: +44 (0)161 – 406 7046Fax: +44 (0)161 – 406 7014Email: [email protected]

France: Kinshofer  France S.A.R.L.B.P. 20100F-67213 Obernai CedexTel.:   +33(0) 3 88 39 55 00Fax:  +33(0) 3 88 79 06 75Email: [email protected]

Canada: Kinshofer North America5040 Mainway Drive, Unit #11Burlington, ON L7L 7G5Tel.: +1 (905) 335 2856Fax: +1 (905) 335 4529Toll Free (North America): 1 (800) 268 9525Email: [email protected]

United States of America:Kinshofer USA6420 Inducon DriveSuite GSanborn, NY, 14132Tel.: +1 (716) 731 4333Toll Free (North America): 1 (800) 268 9525www.kinshofer.com

中国: Darda Kinshofer Construction Machinery Co. Ltd.Unit #306, Landmark Tower 28 Dongsanhuan Road Beijing 100004Tel.: +86 (10) 6590 6422Fax: +86 (10) 6590 6423Email: [email protected]

Suomi (valid from February 2015): Kinshofer Finland OyRealparkinkatu 9,FI-37570 LempääläTel.: +358 (0)75 7540 200Fax: +358 (0)75 7540 210Email: [email protected]

Sverige: RF System AB Furutorpsgatan 6SE-288 34 VinslövTel.: +46 (0)44 817 07Fax: +46 (0)44 859 63Email: [email protected]

Suomi (valid until February 2015): Kinshofer Aponox OyLaajamäentie 1 FI-13430 HämeenlinnaTel.: +358 (0)75 7540 200Fax: +358 (0)75 7540 210Email: [email protected]

Documents

CONSTRUCTION – GENERAL CONSTRUCTION CONSTRUCTION … · CONSTRUCTION – UTILITIES, OIL & GAS ... ranging from sleeper layers ... As empty building sites become less each day and