• Home

  • Documents

  • construction or fabrication, prior to final design. Red hand grip, automatic release A z ......
1

construction or fabrication, prior to final design. Red hand grip, automatic release A z ... TOLERANCES. NE-N-ISO 2768-1 PROJECTION. NGO-OGCK AppR0VED

Embed Size (px)

Citation preview

Page 1: construction or fabrication, prior to final design. Red hand grip, automatic release A z ... TOLERANCES. NE-N-ISO 2768-1 PROJECTION. NGO-OGCK AppR0VED

ATTACHMENT FOUR REFERENCE DOCUMENTSsepta.org/business/bid/100k/detail/2017-8-17-00174-amzk-atach4pt15.pdfDIN ISO 2768 T.1 DIN ISO 2768 T.2 Standard tolerances for machining and forming:

ATTACHMENT FOUR REFERENCE DOCUMENTSsepta.org/business/bid/100k/detail/2017-8-17-00174-amzk-atach4pt15.pdfDIN ISO 2768 T.1 DIN ISO 2768 T.2 Standard tolerances for machining and forming:

Documents
SMALL MAGNETS - en.sav-spanntechnik.deen.sav-spanntechnik.de/pdf/catalogues/SAV-Small-Magnets_V2014-09… · Geometric and positional tolerances according to DIN ISO 2768-2-K

SMALL MAGNETS - en.sav-spanntechnik.deen.sav-spanntechnik.de/pdf/catalogues/SAV-Small-Magnets_V2014-09… · Geometric and positional tolerances according to DIN ISO 2768-2-K

Documents
ungAllgemeintoleranzen ISO 2768-mH 6mm: 0,2 General tolerances ISO 2768-mH 6mm: 0,2 Tolerierung nach ISO 8015 Tolerances as per ISO 8015 Oberflächen nach ISO 1302 Surfaces as per

ungAllgemeintoleranzen ISO 2768-mH 6mm: 0,2 General tolerances ISO 2768-mH 6mm: 0,2 Tolerierung nach ISO 8015 Tolerances as per ISO 8015 Oberflächen nach ISO 1302 Surfaces as per

Documents
Thermal Systems - storage.googleapis.com...General tolerances according to DIN ISO 2768-v, General tolerances for casted parts according EN ISO 8062-3 (DCTG 10). Tolerances for rubber

Thermal Systems - storage.googleapis.com...General tolerances according to DIN ISO 2768-v, General tolerances for casted parts according EN ISO 8062-3 (DCTG 10). Tolerances for rubber

Documents
Afvalwaterbehandelingsystemen - Raak Milieutechniek 1:10 Samenstelling KLRV--28-08-2014--PR Tolerancing principle ISO 8015 Non-indicated tolerances ISO 2768 mK 1/1 Aqua Screen APPROVED

Afvalwaterbehandelingsystemen - Raak Milieutechniek 1:10 Samenstelling KLRV--28-08-2014--PR Tolerancing principle ISO 8015 Non-indicated tolerances ISO 2768 mK 1/1 Aqua Screen APPROVED

Documents
Quantum Energy Generator - WordPress.com...LINEAR/ANGULAR TOLERANCES: DIN ISO 2768-1, CLASS M FORM AND PLACE TOLERANCES: DIN ISO 2768-2, CLASS K CLIENT: SCALE: 1:6 400 A A FRONT VIEW

Quantum Energy Generator - WordPress.com...LINEAR/ANGULAR TOLERANCES: DIN ISO 2768-1, CLASS M FORM AND PLACE TOLERANCES: DIN ISO 2768-2, CLASS K CLIENT: SCALE: 1:6 400 A A FRONT VIEW

Documents
SinCos SRS50, SRM50, SRS60, SRM60 SRS50 Standalone, … Optic/SRS50FTA0K21.pdfGeneral tolerances to DIN ISO 2768-mk General tolerances to DIN ISO 2768-mk 8.5 10.4 50 ±0.5 16.9 15±0.3

SinCos SRS50, SRM50, SRS60, SRM60 SRS50 Standalone, … Optic/SRS50FTA0K21.pdfGeneral tolerances to DIN ISO 2768-mk General tolerances to DIN ISO 2768-mk 8.5 10.4 50 ±0.5 16.9 15±0.3

Documents
Product Guide - Manitowoc Cranes Home/media/Files/MTW Direct/Grove/All... · DIN EN ISO 13920 BF Tolerances for welded cons. DIN ISO 2768-mK DIN ISO 1302 DIN 7184/ISO 1101 Tolerances

Product Guide - Manitowoc Cranes Home/media/Files/MTW Direct/Grove/All... · DIN EN ISO 13920 BF Tolerances for welded cons. DIN ISO 2768-mK DIN ISO 1302 DIN 7184/ISO 1101 Tolerances

Documents
NavIgatIoNSlatERNEN - Herstellerübersicht - BUKH Bremen Signa… · ISO 8062 - CT7 General tolerances; Allgemeintoleranzen; ISO 2768 - mH General tolerances for thermal cutting parts;

NavIgatIoNSlatERNEN - Herstellerübersicht - BUKH Bremen Signa… · ISO 8062 - CT7 General tolerances; Allgemeintoleranzen; ISO 2768 - mH General tolerances for thermal cutting parts;

Documents
F F SEZIONE A - A · posizione sec. ISO 2768/2 Shape and position tolerances according to ISO 2768/2 Classi di tolleranza Deviations grade Quote di lavorazione senza indicazione di

F F SEZIONE A - A · posizione sec. ISO 2768/2 Shape and position tolerances according to ISO 2768/2 Classi di tolleranza Deviations grade Quote di lavorazione senza indicazione di

Documents
FLAŞ BUHAR SİSTEMİ - Ayvaz...EN 22768-2 EN 22768-1 ISO 2768-f açı ölçüleri için toleranslar. dimensions without individual tolerance indications. Standard and tolerances for

FLAŞ BUHAR SİSTEMİ - Ayvaz...EN 22768-2 EN 22768-1 ISO 2768-f açı ölçüleri için toleranslar. dimensions without individual tolerance indications. Standard and tolerances for

Documents
…és bármi, ami egyedi! - Evolt · Nem jelölt tűrések: DIN ISO 2768-1m Allgemeintoleranzen nach DIN ISO 2768-1m Non-marked tolerances on the basis of Standard: Standard: 22

…és bármi, ami egyedi! - Evolt · Nem jelölt tűrések: DIN ISO 2768-1m Allgemeintoleranzen nach DIN ISO 2768-1m Non-marked tolerances on the basis of Standard: Standard: 22

Documents
تاصشم و لکشرییغت نییعت -کاخ يراذگراب نومزآ ...dl1.iarchitect.me/Standard/IranISO-18653.pdf · 2019. 4. 30. · 9 2-8 ISO 2768-2 : 1989 General tolerances

تاصشم و لکشرییغت نییعت -کاخ يراذگراب نومزآ ...dl1.iarchitect.me/Standard/IranISO-18653.pdf · 2019. 4. 30. · 9 2-8 ISO 2768-2 : 1989 General tolerances

Documents
Is 2102 Part 2 1993 ISO 2768 2 1989 General Tolerances Part 2 Geometrical Tolerances for Features Without Individual Tolerance Indications

Is 2102 Part 2 1993 ISO 2768 2 1989 General Tolerances Part 2 Geometrical Tolerances for Features Without Individual Tolerance Indications

Documents
Fabrication Tolerance & Workmanship STANDARD NO.: Z0244 …€¦ · ISO 898-1 Mechanical Properties of Fasteners Made of Carbon and Alloy Steel 5.42. ISO 2768-1 Tolerances for Linear

Fabrication Tolerance & Workmanship STANDARD NO.: Z0244 …€¦ · ISO 898-1 Mechanical Properties of Fasteners Made of Carbon and Alloy Steel 5.42. ISO 2768-1 Tolerances for Linear

Documents
HighLight FL-ARM...din iso 2768-k t2 din iso 2768-m t1 dimensions are in mm (millimeter) general tolerances: machined welded sfs-en 13920-bf sfs-en 22768-1-m scale the information

HighLight FL-ARM...din iso 2768-k t2 din iso 2768-m t1 dimensions are in mm (millimeter) general tolerances: machined welded sfs-en 13920-bf sfs-en 22768-1-m scale the information

Documents
T - Página inicial · ISO 2768-1 – “Tolerances for Linear and Angular Dimension Without Individual Tolerance Indications”. MIL-STD-662 – “V 50 Ballistic Test for Armor”

T - Página inicial · ISO 2768-1 – “Tolerances for Linear and Angular Dimension Without Individual Tolerance Indications”. MIL-STD-662 – “V 50 Ballistic Test for Armor”

Documents
Recommended machine weight - Gjerstad...Brokelandsheia, N-4993 sundebru 1070 kg GENERAL TOLERANCES For non tolerance measurements MACHINED PARTS: NS-ISO 2768-1 Grade: m WELDED CONSTRUCTIONS:

Recommended machine weight - Gjerstad...Brokelandsheia, N-4993 sundebru 1070 kg GENERAL TOLERANCES For non tolerance measurements MACHINED PARTS: NS-ISO 2768-1 Grade: m WELDED CONSTRUCTIONS:

Documents
DRAWING STANDARDS D01 - HWA Team · 2020-01-17 · DIN ISO 2768-2 General tolerances; Tolerances of form and location without individual tolerance indications DIN EN ISO 5459 Geometrical

DRAWING STANDARDS D01 - HWA Team · 2020-01-17 · DIN ISO 2768-2 General tolerances; Tolerances of form and location without individual tolerance indications DIN EN ISO 5459 Geometrical

Documents
Leidenschaft entwickeln Operating Manuel - Neff GmbH entwickeln Andreas ... The tolerances of the four assembly sides correspond to the DIN ISO 2768-mH standard. ... Tolerance of position

Leidenschaft entwickeln Operating Manuel - Neff GmbH entwickeln Andreas ... The tolerances of the four assembly sides correspond to the DIN ISO 2768-mH standard. ... Tolerance of position

Documents
tz 00648-gihr-k20do - Hytec HydraulikGeneral tolerances kanten gratfrei Sharp edges DIN ISO 2768-mk removed Oberfläche konserviert / Surface preserved Maßstab/Scale: 1:1 Material:

tz 00648-gihr-k20do - Hytec HydraulikGeneral tolerances kanten gratfrei Sharp edges DIN ISO 2768-mk removed Oberfläche konserviert / Surface preserved Maßstab/Scale: 1:1 Material:

Documents
Pellematic Maxi - oekofen · Allgemeintoleranz DIN ISO 2768-1 General tolerances Datum Name Artikelnummer: Articlenumber Projekt: Project Ober˜ächenbehandlung: surface treatment

Pellematic Maxi - oekofen · Allgemeintoleranz DIN ISO 2768-1 General tolerances Datum Name Artikelnummer: Articlenumber Projekt: Project Ober˜ächenbehandlung: surface treatment

Documents
SEZIONE A - A A - Access...posizione sec. ISO 2768/2 Shape and position tolerances according to ISO 2768/2 Classi di tolleranza Deviations grade Quote di lavorazione senza indicazione

SEZIONE A - A A - Access...posizione sec. ISO 2768/2 Shape and position tolerances according to ISO 2768/2 Classi di tolleranza Deviations grade Quote di lavorazione senza indicazione

Documents
Connection Technology - asa-group · 2020. 3. 4. · according to DIN ISO 2768-vL, General tolerances for casted parts according EN ISO 8062-3 (DCTG 10). Tolerances for rubber parts

Connection Technology - asa-group · 2020. 3. 4. · according to DIN ISO 2768-vL, General tolerances for casted parts according EN ISO 8062-3 (DCTG 10). Tolerances for rubber parts

Documents
En 2768-1 General Tolerances

En 2768-1 General Tolerances

Documents
№68 (2768)

№68 (2768)

Documents
ZEISS Smartzoom 5 - optosys.euoptosys.eu/wp/wp-content/uploads/2014/08/DE_42_011_126_Smartzoo… · General tolerances ISO 2768-mH Size ISO 14405 17.760 kg ZGHSH Stand D mot pivoting

ZEISS Smartzoom 5 - optosys.euoptosys.eu/wp/wp-content/uploads/2014/08/DE_42_011_126_Smartzoo… · General tolerances ISO 2768-mH Size ISO 14405 17.760 kg ZGHSH Stand D mot pivoting

Documents
LED-Navigationsleuchte Backbord Steuerbord Heck Heck … · ISO 8062 - CT7 General tolerances; Allgemeintoleranzen; ISO 2768 - mH for thermal cutting parts; General tolerances Allgemeintoleranzen

LED-Navigationsleuchte Backbord Steuerbord Heck Heck … · ISO 8062 - CT7 General tolerances; Allgemeintoleranzen; ISO 2768 - mH for thermal cutting parts; General tolerances Allgemeintoleranzen

Documents
Thermal Systems - asa-group · 2020. 3. 3. · according to DIN ISO 2768-vL, General tolerances for casted parts according EN ISO 8062-3 (DCTG 10). Tolerances for rubber parts are

Thermal Systems - asa-group · 2020. 3. 3. · according to DIN ISO 2768-vL, General tolerances for casted parts according EN ISO 8062-3 (DCTG 10). Tolerances for rubber parts are

Documents
General tolerances - 21food.cnimg.21food.cn/img/biaozhun/20100729/181/11294220.pdf · ISO 2768-1:1989, General tolerances ... general tolerances on circularity, straightness and parallelism,

General tolerances - 21food.cnimg.21food.cn/img/biaozhun/20100729/181/11294220.pdf · ISO 2768-1:1989, General tolerances ... general tolerances on circularity, straightness and parallelism,

Documents