Upload
nguyentruc
View
269
Download
1
Embed Size (px)
Citation preview
Consumables & Tools
Satisloh - Optical Manufacturing Solutions
Dia
mon
d T
ools
Sur
faci
ng
Turning Tips and Holders for VFT GeneratorsTechnical Data
Radius 2 mm, 5 mm and 8 mm PCD* tip for RX-production of CR39 and selected high index lensesRadius 2 mm MCD* tip for all organic lens materials and free-form
Benefits
Short set-up time after tool change due to accurate length, height and radius of the toolEasy exchange of turning tipsResharpening of PCD* tools up to 4 times possible, up to 8 times when using MCD* tools, provided that the tips have not been damagedHigher throughput by increased spiral space utilizing 5 mm PCD* tool (CR39/HI only)Ensure short polishing time on soft tool polishers and on Toro-X machinesIncrease surface smoothness utilizing MCD* tools for lathing polycarbo-nate and selected high index materials
*PCD = polycrystalline diamond - *MCD = mono crystalline diamond
Packing Unit Order No.
VFT-orbitTool holder 1 pc. 92-007-491
Turning tip PCD R 2 mm 1 pc. 92-007-611
Turning tip MCD R 2 mm 1 pc. 92-007-626
Turning tip MCD premium R 2 mm 1 pc. 92-007-625
Turning tip PCD R 8 mm (dia 16 mm) 1 pc. 92-007-241
Twin action diamond R 2mm** 1 pc. 92-008-053
VFT-compact Tool body 1 pc. 92-005-560
Holder for tool body 1 pc. 92-006-331
Turning and engraving holder 1 pc. 92-007-076
Complete holder turning/engraving (w/o tools) 1 pc. 92-007-098
Holder for engraving pin 1 pc. 92-007-077
Turning tip PCD R 2 mm 1 pc. 92-005-546
Turning tip PCD R 5 mm 1 pc. 92-005-562
Turning tip LC R 5 mm PCD 1 pc. 92-006-984
Turning tip MCD R 2 mm 1 pc. 92-006-714
Turning tip MCD premium R 2 mm 1 pc. 92-005-564
VFT-ultraHolder for 16 mm PCD insert 1 pc. 92-007-240
Single tool reception 6° /CX H=11.7 1 pc. 92-006-499
Single tool reception 6° CC/CX H=12.7 1 pc. 92-006-497
Single tool reception 6° 1 pc. 92-005-547
Single tool reception 6° 14.5 mm 1 pc. 92-006-969
Tool holder for engraving complete (w/o tools) 1 pc. 92-007-099
Turning tip PCD R 5 mm 1 pc. 92-007-105
Turning tip PCD 2 mm 1 pc. 92-007-106
Turning tip MCD R 2 mm 1 pc. 92-006-713
Turning tip MCD premium R 2 mm 1 pc. 92-005-558
** may cause limited working range
•
•
•
••
•
••
For high speed ready-to-polishturning processes onVFT models.
Turning tipsPCD / MCD
Ophthalmic Consumables
Table of Contents
For more than 90 years we
have provided ophthalmic
laboratories around the word
with precision optical products
and equipment. Our approach
focuses on the integration of
the industry’s finest equipment
matched with process
consumables that ensure
optimum results.
Be assured that each item in
this catalog is designed and
manufactured to maximize the
efficiency and performance of
your lab equipment. Our goal is
to help give you a competitive
edge by optimizing workflow
and improving yields.
When choosing consumable
products, it’s important that the
materials are suitable for the
machine, they bring optimum
results, and the quality is
consistent. Be confident that
our consumable products fulfill
these requirements.
For world-class service
and more information on
our products, contact our
customer service department.
S U R FA C I N G
Lens Protection & Blocking | 1 S - 3 SAuto Tape 3M™ Surface Saver Plus Nucleo Blocking UV Adhesive Blocking Alloy 117°Nucleo BlockBlocking Chuck
Fining Polycarbonate | 4 SP800 Poly One-Step
Fining CR39 / HI Index | 5 SP1200 One-Step
Conventional Polishing | 6 SUltimate White
Base Pad System | 7 S - 8 SLo-Lift Base Pad System
Polishing | 9 SPoly-Pro Polish System
Coolants & Defoamers | 10 S - 12 SLH-205 Coolant PLUSLH-305 Coolant PLUSPoly-LubeLoFoam
Digital Polishing | 13 S - 15 SStandard-FLEX Polishing CapsPremium-FLEX Polishing CapsExtreme-FLEX Polishing Caps
Generating Tools | 16 S - 20 SVFT Milling Wheels / PCD InsertsVFT Turning Tips / HoldersV50/V75 Cutting Wheels / PCD InsertsV100 Cutting Wheels / PCD InsertsVPRO
Job Trays | 21 SJob Trays
csr.usa@satis loh l 800.866.5640
C O AT I N G
AR Consumables | 1 C - 8 CProprietary Evaporants for AR CoatingSatisloh Top CoatsMonitor CrystalsCrucible Liners for Electron Beam EvaporationEvaporation Boats for Thermal SourcesFilaments for Electron Beam and Ion Sources
AR Accessories | 9 C - 10 CConsumables for Ion Guns Consumables for Electron Beam
Dip Coating Materials | 11 CHard Coating Chemicals for Dip Coating
Spin Coating Materials | 12 CCleaners for Spin CoatingLacquer for Spin Coating
F I N I S H I N G
Finish Pads | 1 FConform Advantage Plus Finish PadConform Advantage Finish Pad
Finish Blocking | 2 F - 3 FConform Finish BlockSatisloh Finish Block
Finish Pads | 4 F - 5 FSecur-edge Finish Pad3M™ Finishing PadConform PadsConform Advantage Plus
Finish Lens Protection | 6 F Lens Protective Blue PadAnti Slip Pad
Job Trays | 7 FJob Trays
Cutters / Diamonds | 8 FEdging Tools ES-2 / ES-3 / ES-4Dressing Stones for Diamond Tools
Edger Cutter Blades | 9 F - 11 F7E / 7Ex Dual Polish Assembly7E / 7Ex Multi-Cutter Body Assembly7E / 7Ex High W rap 2 Polish Assembly7E / 7Ex 5° Taper Polish Assembly
Surfacing l csr.usa@satis loh l 800.866.5640 1 S
Technical
• Size: 10 cm x 33 m roll/ 10 cm x 99 m roll• Thickness: 0.15 mm• Color: Transparent blue• Lenses per roll: 325 (approximate) / 950 (approximate)
Benefits
• Easy application and conforms evenly to lens front surface.• No solvents required for removal and doesn’t leave sticky residue.• Proven compatibility with all Satisloh surfacing machinery.• Works well with automated taping systems.
Recommendations
• Apply with Satisloh AutoTaper or manual tape applicator.• After tape is applied, surface must remain moisture and fingerprint free.
Failure to do so increases the possibility of deblocking lenses.• Store between 60-80º F.
Auto Tape
Technical
• Size: 10 cm x 50 m roll• Thickness: 0.20 mm• Lenses per roll: 450 (approximate)
Benefits
• Easy handling.• Consistent adhesive quality.• Two types of adhesive strengths.
Surface Saver Tape Blocking Medium Lens Material
Blue Tape Alloy Mineral & plastic
Clear Tape Wax Plastics
Surface Saver Tape Blocking Medium Lens Material
Auto Tape Alloy Mineral & plastic
Auto Tape XL Alloy Mineral & plastic
Order No. Size Unit
98-003-922 10 cm x 33 m roll
98-004-327 10 cm x 99 m roll
Order No. Product Size Unit
92-006-512 3M 1640 High Bond 10 cm x 50 yd roll
92-000-449 3M 1641 Medium Bond 10 cm x 50 m roll
92-005-488 3M 1663 Clear for Wax 10 cm x 70 yd roll
92-000-509 3M Tape Applicator each
Ordering
Ordering
Applications
Applications
3M™ Surface Saver Plus
Lens
Pro
tect
ion
& B
lock
ing
Provides superb front surface protection for all lens materials. Because of advanced adhesive qualities it works with a full range of alloys.
Protective tapes for all lens materials (see chart).
Surfacing l csr.usa@satis loh l 800.866.5640 2 S
Blocking Alloy 117°
Low melting surface blocking alloys for all materials.
Benefits
• Short cooling times.• All virgin metals for optimum adhesion on lens materials.• Packaged in easy-to-use 2.2 pound (1 kg) ingots.• Ingots labeled with melting temperature prevents mixing alloys.• Recyclable.
Recommendations• After blocking, a minimum 30-minute cooling period is recommended. • Maintain proper alloy levels for consistent temperature.• Remove slag daily and prior to filling with fresh alloy.
Order No. Product Unit
92-000-442 Alloy 117° F 2.2 lb ingot
Order No. Unit
92-008-221 18 kg bucket
Ordering
Ordering
Block Medium Blocker Temp. Set At
117° F PLA, PRA, Auto Blocker S 122°- 123° F
Blocking Temp. Lens Materials Workstart After
117° F All 30-min. approx.
More time may be needed based on material.
Applications
Nucleo Blocking UV Adhesive
Technical
• State: Paste• Color: Pale yellow • Odor: Characteristic odor• Oxidizing: Non-oxidizing (by EC criteria)• Flash point > 212°F
Benefits
• Biodegradable
Recommendations• Store in cool, well ventilated area. <=113°F and away from direct sunlight.• Keep container tightly closed.• Avoid formation of dust.• Follow local regulations regarding disposal. Environmentally-friendly, light
curable adhesive used in blocking with Satisloh Nucleo Blocks
EXCLUSIVE
PRODUCT
Lens
Pro
tect
ion
& B
lock
ing
Surfacing l csr.usa@satis loh l 800.866.5640 3 S
Nucleo Block
Machineable plastic block; use in every machine, including AR and edging. Open platform can be used with any brand surfacing equipment. Disposable / reusable.
Technical
• Material: UV-transmit plastic
Benefits
• Fully automated alloy-free blocking• UV curable blocking material• DIfferent block piece curvatures save adhesive• Economical• Recycle
Recommendations
• Use at room temperature• Store in dust-free environment• Clean with warm water to remove adhesive
Order No. Curve Radius Unit
92-008-084 Base 9/ Radius 60 300 / bag
92-008-081 Base 7/ Radius 80 350 / bag
92-008-082 Base 5/ Radius 110 350 / bag
92-008-083 Base 3/ Radius 180 350 / bag
92-008-085 Base 1/ Radius 500 350 / bag
92-008-221 UV Adhesive 18 kg bucket
Ordering
Blocking Chuck
Unique v-groove design holds the lens accurately for alloy and wax blocking.
Technical• Material: Aluminum• Diameter: 43 mm (standard alloy block)• Designs: Standard and Combi style for use with pin style cylinder machines.• Anodized for tracking.
Benefits
• Eliminates pins – reducing machine wear and parts costs.• Accurate – provides even coverage during fining/polishing processes.• V-groove design optimal for robotic handling.• Durable and long lasting construction minimizes chuck damage. • Single chuck style for entire curve range (alloy only).• Combi style can be used with pin style cylinder machines.
Recommendations• Blocks used at room temperature.• Keep blocks free of dried polish and other contaminates.• Do not clean with acidic products.• Replace worn blocks.• Recycle.
Order No. Chuck Style Curve Radius Color Unit
05-005-577 Standard-alloy Fits all Black ea
02-001-136 Combi-alloy Fits all Black ea
05-058-728 Alloy-notched Fits all Black ea
Ordering
EXCLUSIVE
PRODUCT
Lens
Pro
tect
ion
& B
lock
ing
Surfacing l csr.usa@satis loh l 800.866.5640 4 S
Fin
ing
Pol
ycar
bona
te
Premium one-step fining pad for polycarbonate lenses.
Technical
• Abrasive: P800-graded silicon carbide• Backing: Double-sided silicon coated paper• Adhesive: Woven gummed rubber• Thickness: 0.37 mm• Design: 7 petal / 16 petal• Diameter: 76, 83, and 89 mm• Roll: 1,000 pads
Benefits
• Consistent stock removal on polycarbonate and Trivex.• Paper style backing for consistent and even distribution of abrasive.• Silicon carbide abrasive for consistent smoothing.• Can be used with LO-Lift Base Pad.• Industrial packaging prevents moisture and contamination - extending shelf life.• Single pad fining system reduces errors and costs.
Recommendations
• Always center pad on-center to clean, dry tool for optimal results.• Recommended for one-step fining elliptical error free lenses produced on
newer CNC generators, including the Satisloh V-Series.• Polish pad should be a larger diameter than fining pad. As follows:• Smoothing pad 76 mm / Polishing pad 83 mm.• Smoothing pad 83 mm / Polishing pad 89 mm.
EXCLUSIVE
PRODUCT
Machine Material Pressure Cycle Time Stock Removal
Toro-X Poly 0.20 bar 2:30 0.20 mm
Trivex 0.20 bar 2:30 0.20 mm
CR-39 0.20 bar 1:00 0.30 mm
Mid Index 0.20 bar :50 0.30 mm
Hi Index 0.20 bar 1:00 0.30 mm
Transition 0.20 bar 1:00 0.30 mm
Spectralite 0.20 bar 1:15 0.25-0.30 mm
Pin Style All 14-16 psi 2:30-3:00 0.20 mm
Order No. Size Unit
98-003-901 76 mm/7 petal 1,000/roll
98-003-903 83 mm/7 petal 1,000/roll
98-003-904 89 mm/7petal 1,000/roll
98-004-355 76 mm/16 petal 1,000/roll
Ordering
Applications
For all materials processing. Satisloh recommends using Toro-X-2SL.Satisloh A.C.T. process can offer reduced times. Contact us for more information.
P800 Poly One-Step
Surfacing l csr.usa@satis loh l 800.866.5640 5 S
Fin
ing
CR
39 /
HI I
ndex
Premium one-step fining pad forall plastic lens materials.
Technical
• Abrasive: P-Graded aluminum oxide• Backing: Double-sided aluminum oxide coated paper• Adhesive: Woven gummed rubber• Thickness: 0.37 mm• Design: 6 & 7 petal• Diameter: 76, 83, and 89 mm• Roll: 1,000 pads
Benefits
• Consistent stock removal on all plastic materials including mid, and Hi Index, Transitions, and Spectralite.• Provides exceptional surface quality with shortest process times.• Pressure sensitive adhesive for easy application and removal.• Can be used as a conventional pad or with the LO-Lift Base Pad.
Recommendations
• Recommended for one-step fining elliptical error free lenses produced on newer CNC generators, including the VFT and Satisloh V-Series.• Always center pad on clean, dry tool for optimal results.• Polish pad should be a larger diameter than fining pad. As follows:• Smoothing pad 76 mm / Polishing pad 83 mm.• Smoothing pad 83 mm / Polishing pad 89 mm.
EXCLUSIVE
PRODUCT
Machine Material Pressure Cycle Time Stock Removal
Toro-X CR-39 0.25 bar 1:30 0.25-0.30 mm
Mid Index 0.25 bar 1:30 0.25 mm
Hi Index 0.25 bar 1:15 0.20 mm
Transition 0.25 bar 1:30 0.25 mm
Spectralite 0.25 bar 1:30 0.25-0.30 mm
Pin Style All 16-18 psi 1:30 0.20 mm
Order No. Size Unit
92-000-355 76 mm/6 petal 1,000/roll
98-004-387 76 mm/7 petal 1,000/roll
92-000-357 83 mm/6 petal 1,000/roll
92-000-359 83mm/7 petal 1,000/roll
92-000-358 83mm/7 petal non-adhesive 1,000/roll
92-000-349 83mm/6 petal 1,000/roll
98-004-356 76 mm/16 petal 1,000/roll
Ordering
Applications
P1200 One-Step
Surfacing l csr.usa@satis loh l 800.866.5640 6 S
Con
vent
iona
l Pol
ishi
ngUltimate White
Premium polish pad for plastics, polycarbonate, and hi index.
Technical
• Surface Material: Woven-backed; high density floc• Adhesive: Gummed compensated• Design: 7 petal / 16 petal• Thickness: 1.15 mm• Diameter: 76, 83, and 89 mm• Roll: 500 pads
Benefits
• Reduces swirls and increases surface quality on Polycarboante & Trimex.• Outperforms all competitors on all organic materials and hard resin.• Consistent performance from first to last pad.• Can be used with or without LO-Lift Base Pad.• Very little floc loss.• Exclusive product of Satisloh.
Recommendations
• Store in a dry place at 60-75º F.• Polish pads should be a larger diameter than fining pad. As follows:
- Smoothing pad 76 mm / Polishing pad 83 mm - Smoothing pad 83 mm / Polishing pad 89 mm
• With base pad system, tool needs to be free of liquid polish for proper adhesion.
Machine Material Pressure Cycle Time Speed
Toro-X CR-39, Mid, & HI
0.35 bar 6:00 high
Transitions & 0.35 bar 6:00 high
Spectralite
Poly & Trivex 0.35 bar 6:00 high
Pin Style All 16-18 psi 6:00 high
Order No. Size Unit
98-004-508 76 mm / 7 petal 500/roll
98-004-507 83 mm / 7 petal 500/roll
98-004-509 89 mm / 7 petal 500/roll
92-005-402 76 mm / 16 petal 500/roll
Ordering
EXCLUSIVE
PRODUCT
Applications
Satisloh A.C.T. process can offer reduced times. Contact us for more information.
Surfacing l csr.usa@satis loh l 800.866.5640 7 S
Bas
e P
ad S
yste
mLo-Lift Base Pad System
Non-abrasive, durable base pad with a unique design for easy application and removal of fining and polish pads.* Can be used as an all materials one-step pad,
including CR39, HI, and polycarbonate.
Technical
• Size: 70, 76, 85 mm• Thickness: 0.38 mm• Color: Multiple; see chart• Surface: Latest technology top coat• Adhesive: Rubber-based adhesive• Design: 7 petal
Benefits
• Unique surface design allows superior contact between working pads and base pad even when wet – eliminating the need to dry tool.
• Long life, 500+ uses, lowest cost per lens.• Pad maintains size consistency – eliminating shrinkage.• Multiple colors available for easy lap tool identification.• No chemicals needed for easy removal – adhesive simply loosens in warm
water and pad peels off.• Easy removal from liner.
Recommendations
• Tool preparation for applying new base pad: - Tool must be clean and dry. - Locate base pad on tool center. - Warm tool above room temperature for proper adhesion. - Use pad press to secure.
Recommended fining/polishing pads for Lo-Lift Base Pad System
Fining CR/HI Index
Order No. Product Size Unit
98-004-387 One-Step P1200 76 mm / 7 petal 1,000/roll
92-000-359 One-Step P1200 83 mm / 7 petal 1,000/roll
98-004-356 One-Step P1200 76 mm / 16 petal 1,000/roll
Fining Polycarbonate
Order No. Product Size Unit
98-003-901 One-Step P800 76 mm / 7 petal 1,000/roll
98-003-903 One-Step P800 83 mm / 7 petal 1,000/roll
98-003-904 One-Step P800 89 mm / 7 petal 1,000/roll
98-004-355 One-Step P800 76 mm / 16 petal 1,000/roll
Polishing
Order No. Product Size Unit
98-004-508 Ultimate White 76 mm / 7 petal 500/roll
98-004-507 Ultimate White 83 mm / 7 petal 500/roll
98-004-509 Ultimate White 89 mm / 7 petal 500/roll
92-005-402 Ultimate White 76 mm / 16 petal 500/roll
EXCLUSIVE
PRODUCT
Surfacing l csr.usa@satis loh l 800.866.5640 8 S
Bas
e P
ad S
yste
mLo-Lift Base Pad System - continued
Ordering: Base Pad
Order No. Color Size Unit
98-004-309 Blue 70 mm / 7 petal 250/roll
98-004-111 Blue 76 mm / 7 petal 250/roll
98-004-310 Blue 85 mm / 7 petal 250/roll
98-004-311 Purple 70 mm / 7 petal 250/roll
98-004-112 Purple 76 mm / 7 petal 250/roll
98-004-312 Purple 85 mm / 7 petal 250/roll
98-004-313 Pink 70 mm / 7 petal 250/roll
98-004-113 Pink 76 mm / 7 petal 250/roll
98-004-314 Pink 85 mm / 7 petal 250/roll
98-004-315 White 70 mm / 7 petal 250/roll
98-004-114 White 76 mm / 7 petal 250/roll
98-004-316 White 85 mm / 7 petal 250/roll
98-004-317 Green 70 mm / 7 petal 250/roll
98-004-115 Green 76 mm / 7 petal 250/roll
98-004-318 Green 85 mm / 7 petal 250/roll
98-004-319 Yellow 70 mm / 7 petal 250/roll
98-004-116 Yellow 76 mm / 7 petal 250/roll
98-004-320 Yellow 85 mm / 7 petal 250/roll
98-004-803 Orange 70 mm / 7 petal 250/roll
98-004-801 Orange 76 mm / 7 petal 250/roll
98-004-804 Grey/Silver 70 mm / 7 petal 250/roll
98-004-802 Grey/Silver 76 mm / 7 petal 250/roll
Surfacing l csr.usa@satis loh l 800.866.5640 9 S
Pol
ishi
ngPoly-Pro Polish System
Specially- formulated polishes for specific processes in today’s labs: Poly-Pro, Poly-Pro PLUS, Poly-Pro All-Format™
Poly-Pro All-Format™
• Exclusively formulated digital polish for use in our Auto-Flex, I-Flex, Duo-Flex, and Toro-Flex polishing units in conjunction with Satisloh VFT Generator Line.
• Formulated from the Poly-Pro polish provides needed results in cut-to-polish systems.
• Provides appropriate removal rate for organics, including demanding materials like Polycarbonate and Trivex.
• Suspension treated to provide consistent results and reduce carry out and easy clean up.
• Technical: - pH: 3.0 - 4.2 - Particle size: 1.2 - 2.2 - Baume: 23 - 25
Poly-Pro• Premium conventional polish for all organic materials provides exceptional
surface quality and a consistent removal rate.• Significantly reduces haze and helps eliminate swirls on polycarbonate.• Unique formulation extends polish life – up to 25% longer than most polishes.• Ideal for AR and hard coating.• Suspension treated and frost resistant.• Technical:
- pH: 3.2 - 3.9 - Particle size: 1.6 - 1.8 - Baume: 25 - 33
Poly-Pro PLUS• Premium conventional polish allows for faster stock removals on all materials• Suspension treated to provide consistent results and reduce carry out
and easy clean up.• New formulation provides for lower cycle times while providing highest
quality on all lens materials.• Technical:
- pH: 3.2 - 4.2 - Particle size: 1.0 - 2.0 - Baume: 23 - 25
• Recommendations - To be used with Satisloh A.C.T. Process - Polish Temp of 60°F ± 2° - Filtered with 150-200 micron Nylon mesh filter
Order No. Size
92-005-541 1 gallon
92-005-542 5 gallon pail
Ordering
Order No. Size
98-004-376 1 gallon
98-004-377 5 gallon pail
Ordering
Order No. Size
92-007-987 1 gallon
92-007-988 5 gallon pail
Ordering
EXCLUSIVE
PRODUCT
Surfacing l csr.usa@satis loh l 800.866.5640 10 S
Coo
lant
s &
Def
oam
ersLH-205 Coolant PLUS
A fully synthetic coolant specifically designed for ophthalmic lens processing. Unlike standard coolants, LH-205 PLUS provides exceptional micro coating of all swarf, including polycarbonate, preventing swarf build-up in both the cutting chamber and coolant system. It provides a superior quality lens finish and extends tool life.
Technical
• Color: Transparent red liquid • pH-Value: 10-10.3• Refractometer Factor: 0.7 organic• Odor: Mild• Specific Gravity: 1.04-1.05
Benefits
• Works in Satisloh/Bazell central systems as well as all conventional coolant systems.
• Prevents swarf build-up utilizing unique micro-coating properties.• Outstanding corrosion protection.• Incorporates defoaming agent for low foaming.• Anti-fungal agents prevent bacterial growth in complete circulation process.• Free-rinsing formulation prevents sticky film build-up on lenses as well
as machine tools.• Low misting and no objectionable odor for a pleasant atmosphere.• Economical – lowest cost per surface.• 100% synthetic.• Not adversely affected by below-freezing temperatures.
Recommendations
• Dilution ratio: with water up to 30:1.• Diluted concentration should read 0.7 on Refractometer for Organics.
(Satisloh Manual Refractometer #98-003-662).• For best results, system must be maintained to correct coolant ratio as
recommended by system manufacturer.• For optimum performance, use with Satisloh Foam Defoamer
(#98-004-010 gal., #98-004-167 5 gal.).• Can be used with wet-cut generators as well as edger systems.
Order No. Unit
98-003-948 5 gallon pail
98-003-950 55 gallon drum
Ordering
Tank size (gal.) Add this much coolant (gal.)
200 20 13.3 10 8 6.6
175 17.5 11.6 8.75 7 5.8
150 15 10 7.5 6 5
125 12.5 8.3 6.25 5 4.2
100 10 6.6 5 4 3.3
75 7.5 5 3.75 3 2.5
50 5 3.3 2.5 2 1.6
25 2.5 1.6 1.25 1 0.8
Coolant ratio 10 to 1 15 to 1 20 to 1 25 to 1 30 to 1
To charge tank
EXCLUSIVE
PRODUCT
Surfacing l csr.usa@satis loh l 800.866.5640 11 S
A fully synthetic coolant specifically designed for digital ophthalmic lens processing. This new formulation provides additional chemistry for fine cut processing in digital lens production. C
oola
nts
& D
efoa
mer
sLH-305 Coolant PLUS
Technical
• Color: Yellow / gold• pH-Value: 9.3-10.2• Refractometer Factor: 0.7 organic• Odor: Mild• Specific Gravity: 1.02-1.04
Features
• Based on proven chemistry of LH-205, it provides exceptional lubricity for single point lathing process.• Additional chemistry added allows for smoother cutting and energy release for cleaner optics.• 100% synthetic coolant specially designed for ophthalmic digital lens processing.• Upgraded lo-foam protected.• Outstanding corrosion protection.• Not adversely affected by below-freezing temperatures.
Benefits
• Improved lens cutting technology allows for faster cutting and improved surface quality.• Designed for digital/free form generating.• Improves diamond life.• Prevents swarf build-up.• Improved anti-foaming agents.
Part No. Product Unit
92-006-637 LH-305 PLUS Coolant Plus 5 gallon pail
92-006-883 LH-305 PLUS Coolant Plus 55 gallon drum
98-003-951 Poly-Lube gallon
98-004-010 Lofoam Defoamer gallon
98-004-167 Lofoam Defoamer 5 gallon
98-003-662 Refractometer each
Ordering
Recommendations
• Dilution ratio: with water up to 30:1• Diluted concentration should read 0.7 on refractometer • For best results, system must be maintained to correct coolant ratio as recommended by system manufacturer.
EXCLUSIVE
PRODUCT
Tank size (gal.) Add this much coolant (gal.)
200 20 13.3 10 8 6.6
175 17.5 11.6 8.75 7 5.8
150 15 10 7.5 6 5
125 12.5 8.3 6.25 5 4.2
100 10 6.6 5 4 3.3
75 7.5 5 3.75 3 2.5
50 5 3.3 2.5 2 1.6
25 2.5 1.6 1.25 1 0.8
Coolant ratio 10 to 1 15 to 1 20 to 1 25 to 1 30 to 1
To charge tank
Surfacing l csr.usa@satis loh l 800.866.5640 12 S
Coo
lant
s &
Def
oam
ersPoly-Lube
Designed to enhance the effectiveness of LH-205 PLUS/ 305 PLUS coolant for optimized lens material swarf removal.
Technical
• Physical form: Liquid• Color: Clear• Odor: Mild• pH: 5.5-6.7• Specific Gravity: 1.018• Freezing point: -25°C
Benefits
• Helps maintain proper function of LH-205 PLUS/305 PLUS coolant.• Small amounts needed to maintain system.• Keeps systems swarf-free.• Enhances effectiveness of swarf pumping systems.• Helps reduce foam.
Recommendations• Application: 20-60 ml per 100 gallons daily.• Daily checks must be performed to keep system in order.
Order No. Unit
98-003-951 1 gallon
Ordering
LoFoam
Use in conjunction with LH-205/305 PLUS to reduce foaming in coolant systems.
Technical
• Physical form: Liquid• Color: White/milky• Odor: Mild• Freezing point: -30oF
Benefits
• Proper chemistry to aid the performance of LH-205 PLUS/305 PLUS.• Can be used as needed to control overflow situations caused by lens materials or contamination.• Helps decrease entrained air bubbles and allows them to break on surface.• Keeps system clean and functioning properly. Recommendations• 2 oz dosage per 8-hour shift
Order No. Unit
98-004-010 1 gallon
98-004-167 5 gallon pail
Ordering
EXCLUSIVE
PRODUCT
EXCLUSIVE
PRODUCT
Surfacing l csr.usa@satis loh l 800.866.5640 13 S
Dig
ital P
olis
hingStandard-FLEX Polishing Caps
Best for toric and less demanding full back side digital PAL designs; can be used to produce demanding designs provided process is very tightly controlled.
Technical
• Lifetime: Up to 2,000 to 4,000 seconds.• Polishing pressure: From 0.2 to 0.4 bar.• Work range: Base 0-14 dpt, cyl 0-6 dpt • Flocked velveteen carrier
Benefits
• High shape accuracy for all lens surfaces.• Eliminates hard lap tools.• Short polish times through hard stock removal rates; process times nearly
independent of cylinder and/or add powers. • Highly versatile: polishes all lens formats (toric, spheric, free-form, & concave).
Recommendations
• Please use with recommended polishing compound Poly Pro All Format.
Order No. Product Unit
92007088 Standard Flex 0/0 each
92007052 Standard Flex 1/1 each
92007059 Standard Flex 2/2 each
92007061 Standard Flex 3/3 each
92007062 Standard Flex 4/4 each
92007063 Standard Flex 5/5 each
92007064 Standard Flex 6/6 each
92007065 Standard Flex 7/7 each
92007066 Standard Flex 8/8 each
92007067 Standard Flex 9/9 each
92007053 Standard Flex 10/10 each
92007054 Standard Flex 11/11 each
92007056 Standard Flex 12/12 each
92007057 Standard Flex 13/13 each
92007058 Standard Flex 14/14 each
92007037 Standard Flex kit 168 pcs
Order No. Product Unit
92-008-323 Standard Flex 0/0 CZV each
92-008-324 Standard Flex 1/1 CZV each
92-008-325 Standard Flex 2/2 CZV each
92-008-326 Standard Flex 3/3 CZV each
92-008-327 Standard Flex 4/4 CZV each
92-008-328 Standard Flex 5/5 CZV each
92-008-329 Standard Flex 6/6 CZV each
92-008-330 Standard Flex 7/7 CZV each
92-008-331 Standard Flex 8/8 CZV each
92-008-332 Standard Flex 9/9 CZV each
92-008-333 Standard Flex 10/10 CZV each
92-008-334 Standard Flex 11/11 CZV each
92-008-335 Standard Flex 12/12 CZV each
92-008-336 Standard Flex 13/3 CZV each
92-008-337 Standard Flex 14/14 CZV eachOrder No. Product Unit
92008017 Standard Flex 1/1 each
92008018 Standard Flex 3/3 each
92008019 Standard Flex 5/5 each
92008020 Standard Flex 7/7 each
92008021 Standard Flex 9/9 each
92008022 Standard Flex 11/11 each
92008023 Standard Flex 13/13 each
92008016 Standard Flex starter kit 130 pcs
Standard Flex Caps (I-Flex / Auto Flex)
Standard Flex Caps (Zeiss Process)
Standard Flex Caps (Duo/Toro Flex)
EXCLUSIVE
PRODUCT
Surfacing l csr.usa@satis loh l 800.866.5640 14 S
Dig
ital P
olis
hingPremium-FLEX Polishing Caps
Best for producing primarily digital designs, including dual side progressive. Consumables utilized are priced higher but breakage is significantly lower and polish pads last up to 50 percent longer.
Technical
• Lifetime: Up to 4,000 to 6,000 seconds• Polishing pressure: From 0.2 to 0.4• Work range: Base 0-14 dpt, cyl 0-6 dpt • Polyurethane based polish carrier
Benefits
• High shape accuracy for all lens surfaces• Eliminates hard lap tools• Cost efficient• Reduces handling, because fewer tools are needed for large working range• Short polish times through high stock removal rates; process times nearly independent of cylinder and/or add powers• Highly versatile: polishes all lens formats (toric, spherical, free-form, & concave)
Recommendations• Please use with recommended polishing compound Poly Pro All Format.
Order No. Product Unit
92-009-139 Premium Flex 1/1 each92-009-140 Premium Flex 3/3 each92-009-141 Premium Flex 5/5 each92-009-142 Premium Flex 7/7 each92-009-143 Premium Flex 9/9 each92-009-144 Premium Flex 11/11 each92-009-145 Premium Flex 13/13 each
EXCLUSIVE
PRODUCT
Premium Flex Caps (Duo/Toro Flex)
Surfacing l csr.usa@satis loh l 800.866.5640 15 S
Dig
ital P
olis
hingExtreme-FLEX Polishing Caps
For two-step polishing process best suited for large diameter lenses with steep curves or high wrap lenses - especially Rx sun lenses.
Technical
• Lifetime: Up to 4500 seconds• Polishing pressure: From 0.2 to 0.5• Work range: Base 0-14 dpt, cyl 0-4 dpt• Polyurethane based polish carrier• Fast reaction foam
Benefits
• High shape accuracy for all lens surfaces• Eliminates hard lap tools• Cost efficient• Reduces handling, because fewer tools are needed for large working range• Short polish times through high stock removal rates; process times nearly independent of cylinder and/or add powers• Highly versatile: polishes all lens formats (toric, spherical, free-form, & concave)
Recommendations• Please use with recommended polishing compound Poly Pro All Format.
FIRST STEP
Order No. Product Unit
92-008-515 Extreme Flex 1/1 each92-008-516 Extreme Flex 3/3 each92-008-517 Extreme Flex 5/5 each92-008-518 Extreme Flex 7/7 each92-008-519 Extreme Flex 9/9 each92-008-520 Extreme Flex 11/11 each92-008-521 Extreme Flex 13/13 each92-008-522 Extreme Flex Starter Kit 168 pcs
SECOND STEP
Order No. Product Unit
92-008-571 Extreme Flex 1/1 each92-008-572 Extreme Flex 3/3 each92-008-573 Extreme Flex 5/5 each92-008-574 Extreme Flex 7/7 each92-008-575 Extreme Flex 9/9 each92-008-576 Extreme Flex 11/11 each92-008-579 Extreme Flex 13/13 each92-008-577 Extreme Flex Starter Kit 168 pcs
EXCLUSIVE
PRODUCT
Extreme Flex Caps (Duo/Toro Flex)
Extreme Flex Caps (Duo/Toro Flex)
Surfacing l csr.usa@satis loh l 800.866.5640 16 S
Dia
mon
d T
ools Cutting Wheels and PCD Inserts for VFT Generators
Technical Data
Pre-cuts toric, spherical and free-form organic lensesMaterials: organic lens materials like CR39, HI and polycarbonateThe cutter has 8 polycrystalline bits, each with a diameter of 11 mmBits can be turned 7 timesResharpening of the PCD bits up to 4 times
Benefits
Cutting bits can be exchanged easilyAdjustment of the cutting bits is not necessary due to exact centering by fixing screws (known from Satisloh V-machines)Cuts all organic materialsHigh stock removal rates, high feed ratesReduced deformation in work piece due to low cutting forceExcellent curve accuracy
Packing Unit Order No.
Cutting wheel T66 L incl. 8 PCD inserts 1 pc. 92-002-738
Cutting wheel T66 L (tool body) without inserts 1 pc. 92-000-915
PCD cutter bits 11 mm 1 pc. 92-000-929
PCD cribbing cutter VFT-compact 1 pc. 92-005-544
VFT engraving pin 1 pc. 92-007-078
Cutting wheel VFT-Orbit without cutter bits 1 pc. 92-007-722
Cutting wheel VFT-Orbit with cutter bits 1 pc. 92-007-724
Holder with mounting screw for PCD-tipped wheel T66
1 pc.92-003-416
Holder for PCD-tipped wheel T66 1 pc. 92-003-464
Mounting screw for PCD-tipped wheel T66 1 pc. 92-003-465
•••••
••
••••
Pre-cutter for high stock removal; processes toric, spherical and free-form organic lenses.
Gen
erat
ing
Tool
sVFT Milling Wheels / PCD Inserts
Pre-cutter for high stock removal; processes toric, spherical and free-form organic lenses.
12 blade fixed PCD Insert
Technical
• Pre-cuts toric, spherical and free-form organic lenses• Materials: organic lens materials like CR39, HI and polycarbonate• The cutter has 8 polycrystalline bits, each with a diameter of 11 mm• Bits can be turned 3 times• Resharpening of the PCD bits up to 3 times
Benefits
• Cutting bits can be exchanged easily• Adjustment of the cutting bits is not necessary due to exact
centering by fixing screws• Cuts all organic materials• High stock removal rates, high feed rates• Reduced deformation in work piece due to low cutting force• Excellent curve accuracy
Order No. Unit
92-002-738 Cutting wheel T66 L incl. 8 PCD inserts
92-000-915 Cutting wheel T66 L (tool body) without inserts
92-000-929 PCD cutter bits 11 mm
92-005-544 PCD cribbing cutter VFT-compact
92-007-078 VFT engraving pin
92-003-416 Holder with mounting screw for PCD-tipped wheel T66
92-003-464 Holder for PCD-tipped wheel T66
92-003-465 Mounting screw for PCD-tipped wheel T66
92-009-346 12 blade PCD complete tool
92-009-118 12 blade PCD disc
92-000-914 Hub for 12 blade PCD disc
Ordering
EXCLUSIVE
PRODUCT
EXCLUSIVE
PRODUCT
06-900-201In-house inspection/repair includes: cleaning, bit exchange, minor repairs
06-900-202Certified inspection for critical damage
Satisloh offers a factory inspection/repair service to maintain the integrity of your tooling hubs.
Surfacing l csr.usa@satis loh l 800.866.5640 17 S
Dia
mon
d T
ools
Sur
faci
ng
Turning Tips and Holders for VFT GeneratorsTechnical Data
Radius 2 mm, 5 mm and 8 mm PCD* tip for RX-production of CR39 and selected high index lensesRadius 2 mm MCD* tip for all organic lens materials and free-form
Benefits
Short set-up time after tool change due to accurate length, height and radius of the toolEasy exchange of turning tipsResharpening of PCD* tools up to 4 times possible, up to 8 times when using MCD* tools, provided that the tips have not been damagedHigher throughput by increased spiral space utilizing 5 mm PCD* tool (CR39/HI only)Ensure short polishing time on soft tool polishers and on Toro-X machinesIncrease surface smoothness utilizing MCD* tools for lathing polycarbo-nate and selected high index materials
*PCD = polycrystalline diamond - *MCD = mono crystalline diamond
Packing Unit Order No.
VFT-orbitTool holder 1 pc. 92-007-491
Turning tip PCD R 2 mm 1 pc. 92-007-611
Turning tip MCD R 2 mm 1 pc. 92-007-626
Turning tip MCD premium R 2 mm 1 pc. 92-007-625
Turning tip PCD R 8 mm (dia 16 mm) 1 pc. 92-007-241
Twin action diamond R 2mm** 1 pc. 92-008-053
VFT-compact Tool body 1 pc. 92-005-560
Holder for tool body 1 pc. 92-006-331
Turning and engraving holder 1 pc. 92-007-076
Complete holder turning/engraving (w/o tools) 1 pc. 92-007-098
Holder for engraving pin 1 pc. 92-007-077
Turning tip PCD R 2 mm 1 pc. 92-005-546
Turning tip PCD R 5 mm 1 pc. 92-005-562
Turning tip LC R 5 mm PCD 1 pc. 92-006-984
Turning tip MCD R 2 mm 1 pc. 92-006-714
Turning tip MCD premium R 2 mm 1 pc. 92-005-564
VFT-ultraHolder for 16 mm PCD insert 1 pc. 92-007-240
Single tool reception 6° /CX H=11.7 1 pc. 92-006-499
Single tool reception 6° CC/CX H=12.7 1 pc. 92-006-497
Single tool reception 6° 1 pc. 92-005-547
Single tool reception 6° 14.5 mm 1 pc. 92-006-969
Tool holder for engraving complete (w/o tools) 1 pc. 92-007-099
Turning tip PCD R 5 mm 1 pc. 92-007-105
Turning tip PCD 2 mm 1 pc. 92-007-106
Turning tip MCD R 2 mm 1 pc. 92-006-713
Turning tip MCD premium R 2 mm 1 pc. 92-005-558
** may cause limited working range
•
•
•
••
•
••
For high speed ready-to-polishturning processes onVFT models.
Turning tipsPCD / MCD
Dia
mon
d T
ools
Sur
faci
ng
Turning Tips and Holders for VFT GeneratorsTechnical Data
Radius 2 mm, 5 mm and 8 mm PCD* tip for RX-production of CR39 and selected high index lensesRadius 2 mm MCD* tip for all organic lens materials and free-form
Benefits
Short set-up time after tool change due to accurate length, height and radius of the toolEasy exchange of turning tipsResharpening of PCD* tools up to 4 times possible, up to 8 times when using MCD* tools, provided that the tips have not been damagedHigher throughput by increased spiral space utilizing 5 mm PCD* tool (CR39/HI only)Ensure short polishing time on soft tool polishers and on Toro-X machinesIncrease surface smoothness utilizing MCD* tools for lathing polycarbo-nate and selected high index materials
*PCD = polycrystalline diamond - *MCD = mono crystalline diamond
Packing Unit Order No.
VFT-orbitTool holder 1 pc. 92-007-491
Turning tip PCD R 2 mm 1 pc. 92-007-611
Turning tip MCD R 2 mm 1 pc. 92-007-626
Turning tip MCD premium R 2 mm 1 pc. 92-007-625
Turning tip PCD R 8 mm (dia 16 mm) 1 pc. 92-007-241
Twin action diamond R 2mm** 1 pc. 92-008-053
VFT-compact Tool body 1 pc. 92-005-560
Holder for tool body 1 pc. 92-006-331
Turning and engraving holder 1 pc. 92-007-076
Complete holder turning/engraving (w/o tools) 1 pc. 92-007-098
Holder for engraving pin 1 pc. 92-007-077
Turning tip PCD R 2 mm 1 pc. 92-005-546
Turning tip PCD R 5 mm 1 pc. 92-005-562
Turning tip LC R 5 mm PCD 1 pc. 92-006-984
Turning tip MCD R 2 mm 1 pc. 92-006-714
Turning tip MCD premium R 2 mm 1 pc. 92-005-564
VFT-ultraHolder for 16 mm PCD insert 1 pc. 92-007-240
Single tool reception 6° /CX H=11.7 1 pc. 92-006-499
Single tool reception 6° CC/CX H=12.7 1 pc. 92-006-497
Single tool reception 6° 1 pc. 92-005-547
Single tool reception 6° 14.5 mm 1 pc. 92-006-969
Tool holder for engraving complete (w/o tools) 1 pc. 92-007-099
Turning tip PCD R 5 mm 1 pc. 92-007-105
Turning tip PCD 2 mm 1 pc. 92-007-106
Turning tip MCD R 2 mm 1 pc. 92-006-713
Turning tip MCD premium R 2 mm 1 pc. 92-005-558
** may cause limited working range
•
•
•
••
•
••
For high speed ready-to-polishturning processes onVFT models.
Turning tipsPCD / MCD
Gen
erat
ing
Tool
sVFT Turning Tips / Holders
For high speed ready-to-polishturning processes on VFT models.
Premium MCD/PCD turning tips.
Technical
• Radius 2 mm, 5 mm and 8 mm PCD tip for RX-production of CR39 and selected high index lenses• Radius 2 mm MCD* tip for all organic lens materials and free-form
Benefits
• Short set-up time after tool change due to accurate length, height and radius of the tool• Easy exchange of turning tips• Resharpening of PCD tools up to 3 times possible, up to 5 times when using MCD tools, provided that the tips have not been damaged• Higher throughput by increased spiral space utilizing 5 mm PCD tool (CR39/HI only)• Ensure short polishing time on soft tool polishers and on Toro-X machines• Increase surface smoothness utilizing MCD* tools for lathing polycarbonate
and selected high index materials
Order No. Unit
VFT-orbit
92-007-491 Tool holder
92-007-611 Turning tip PCD R 2 mm
92-007-626 Turning tip MCD R 2 mm
92-007-625 Turning tip MCD premium R 2 mm (natural)
92-007-241 Turning tip PCD R 8 mm (dia 16 mm)
92-008-053 Twin action diamond R 2 mm
VFT-compact
92-005-560 Tool body
92-006-331 Holder for tool body
92-007-076 Turning and engraving holder
92-007-098 Complete holder turning/engraving (w/o tools)
92-007-077 Holder for engraving pin
92-006-983 Turning tip PCD R 2 mm
92-006-984 Turning tip LC R 5 mm PCD
92-006-714 Turning tip MCD R 2 mm
92-005-564 Turning tip MCD premium R 2 mm (natural)
VFT-ultra
92-007-240 Holder for 16 mm PCD insert
92-006-499 Single tool reception 6° /CX H=11.7
92-006-497 Single tool reception 6° CC/CX H=12.7
92-005-547 Single tool reception 6°
92-006-969 Single tool reception 6° 14.5 mm
92-007-099 Tool holder for engraving complete (w/o tools)
92-006-982 Turning tip PCD R 5 mm
92-007-106 Turning tip PCD 2 mm
92-006-713 Turning tip MCD R 2 mm
92-005-558 Turning tip MCD premium R 2 mm (natural)
Ordering
EXCLUSIVE
PRODUCT
EXCLUSIVE
PRODUCT
Surfacing l csr.usa@satis loh l 800.866.5640 18 S
Gen
erat
ing
Tool
sV50/V75 Cutting Wheels / PCD Inserts
Pre-cutter for high stock removal; processes toric, spherical and free-form organic lenses.
Order No. Complete Tools
92-002-738 Standard range (to 14.00 D)
92-002-739 Extended range (to 30 D)
Tool Body Only
92-000-915 Standard
92-000-916 Extended
92-000-929 PCD Cutter Bits
Polycrystalline Diamond Cutters
Order No. Complete Tools
92-002-740 Standard range (to 14.00 D)
4 carbides + 92-002-739 Extended range (to 30 D)
Tool Body Only
92-000-915 Standard
92-000-916 Extended
Carbide Cutter Bits
92-000-928 Standard
Carbide Lap Cutting
Order No. Complete Tools
98-000-137 Standard range (to 14.00 D)
98-000-095 Extended range (to 30 D)
Tool Body Only
92-000-914 Standard
92-000-913 Extended
Cutting Disc Only
92-000-923 Standard (70 mm)
92-000-919 Extended (35 mm)
Glass Cutters
Order No. Complete Tools
98-000-144 Standard range (to 14.00 D)
98-000-127 Extended range (to 30 D)
Tool Body Only
92-000-914 Standard
92-000-913 Extended
Cutting Disc Only
92-000-921 Standard (70 mm)
92-000-918 Extended (35 mm)
Plastic Galvanic Cutters
06-900-201In-house inspection/repair includes: cleaning, bit exchange, minor repairs
06-900-202Certified inspection for critical damage
Satisloh offers a factory inspection/repair service to maintain the integrity of your tooling hubs.
Surfacing l csr.usa@satis loh l 800.866.5640 19 S
Gen
erat
ing
Tool
sV100 Cutting Wheels / PCD Inserts
Order No. Complete Tools
92-002-741 Standard range (to 14.00 D)
92-002-742 Extended range (to 30 D)
Tool Body Only
92-002-077 Standard
92-002-337 Extended
92-000-929 PCD Cutter Bits
Polycrystalline Diamond Cutters
Order No. Complete Tools
92-002-743 Standard range (to 14.00 D)
4 carbides + 92-002-337 Extended range (to 30 D)
Tool Body Only
92-002-077 Standard
92-002-337 Extended
Carbide Cutter Bits
92-000-928 Standard
Carbide Lap Cutting
Order No. Complete Tools
98-000-137 Standard range (to 14.00 D)
98-000-095 Extended range (to 30 D)
Tool Body Only
92-000-914 Standard
92-000-913 Extended
Cutting Disc Only
92-000-922 Standard (70 mm)
92-000-919 Extended (35 mm)
Glass Cutters
Order No. Complete Tools
98-000-144 Standard range (to 14.00 D)
98-000-127 Extended range (to 30 D)
Tool Body Only
92-000-914 Standard
92-000-913 Extended
Cutting Disc Only
92-000-921 Standard (70 mm)
92-000-918 Extended (35 mm)
Plastic Galvanic Cutters
Pre-cutter for high stock removal; processes toric, spherical and free-form organic lenses.
06-900-201In-house inspection/repair includes: cleaning, bit exchange, minor repairs
06-900-202Certified inspection for critical damage
Satisloh offers a factory inspection/repair service to maintain the integrity of your tooling hubs.
Surfacing l csr.usa@satis loh l 800.866.5640 20 S
Gen
erat
ing
Tool
sVPRO
Order No. Complete Tools
92-004-162 Standard range (to 14.00 D)
92-004-541 Extended range (to 24.0 D)
Tool Body Only
92-003-819 Standard
92-004-262 Extended
92-000-929 PCD Cutter Bits
Polycrystalline Diamond Cutters
Order No. Standard
92-003-821 Tool Body Only
92-000-922 Cutting disc only (70 mm)
Glass Cutters
Order No. Complete Tools
92-004-163 Standard
92-000-928 Carbide Cutter Bits
Carbide Lap Cutting
Pre-cutter for high stock removal; processes toric, spherical and free-form organic lenses.
06-900-201In-house inspection/repair includes: cleaning, bit exchange, minor repairs
06-900-202Certified inspection for critical damage
Satisloh offers a factory inspection/repair service to maintain the integrity of your tooling hubs.
Surfacing l csr.usa@satis loh l 800.866.5640 21 S
Job
Tra
ys
Ordering
Job Trays
Satisloh job trays for surfacingand finishing processes.
Technical
• Satisloh combi tray can be used for both surfacing and finishing• Available in standard colors • Designed for Satisloh automated handling systems
Benefits
• Due to a special locating device, the tray holds Satisloh blocking chucks, blocked lenses ready for the finishing process and lenses that have not yet been blocked.• Also available: Plastic envelope for the job ticket and tray divider
Order No. Product Blocking Style Color Unit
Satisloh Blocking Style
92-004-727 Combi Satisloh White 20 pieces
92-004-730 Combi Satisloh Blue 20 pieces
92-004-731 Combi Satisloh Red 20 pieces
92-004-732 Combi Satisloh Green 20 pieces
92-004-733 Combi Satisloh Yellow 20 pieces
Nidek Blocking Style
92-009-340 Combi Nidek White 20 pieces
92-009-341 Combi Nidek Blue 20 pieces
92-009-342 Combi Nidek Red 20 pieces
92-009-343 Combi Nidek Green 20 pieces
92-009-344 Combi Nidek Yellow 20 pieces
92-009-058 Tray Divider Both Clear 1
92-004-450 Rubber Lens Protector NA Black 1
92-000-763 Job Ticket Cover 220 x 135 mm Plastic 10 pieces
Further colors available on request
EXCLUSIVE
PRODUCT
Coating l csr.usa@satis loh l 800.866.5640 1 C
AR
Con
sum
able
s
Technical
• High purity and consistency
Benefits
• Optimized for Satisloh coating processes and machines• Assures high proven quality and high performance• Process guarantee for Satisloh processes
Recommendations
• Store in a dry place• Keep containers closed
Applications
Satisloh process families for box coaters and bell coaters• IONCOTE carbon• IONCOTE kappa • IONCOTE• MULTIQUARTZ• MULTICOTE• PERFORMANCE• HARDCOTE• SPECTRAFLEX• Customized coatings
Proprietary Evaporants for AR Coating
Guaranteed quality with materialsdesigned for Satisloh processes.
Order No. Product Product Form Specificatication Unit Satis Code
92-005-257 AR-Plus Granules 1-2.5 mm 500 g 9870079R001
92-005-865 G X L Process Liquid liquid 1 pc. 6500691V007
92-006-280 HSA Pills dia 20 x 6.5 mm 2 pc. 9870010Q001
92-005-244 HSAK Granules 1.5-3.5 mm 250 g 9870008S001
92-005-944 MIR Granules <1 mm 250 g 9870067X001
92-005-243 S-1-F Granules 2-4 mm 250 g 9870007D001
92-005-241 S-3-F Granules 1-2.5 mm 250 g 9870005D001
92-005-942 S-4-F Granules 1-4 mm 250 g 9870072T001
92-005-255 S-5-F Granules 1-4 mm 250 g 9870072T002
92-005-239 S-8-G plus Granules 1-3 mm 250 g 9870003C002
92-005-254 S-9-G Granules 1-4 mm 250 g 9870071P001
92-005-252 S-11-P Pills 6 g 250 g 9870068L001
92-005-240 S-15-G Granules 0.1-1 mm 250 g 9870003C003
92-005-262 S-22-P Pills 21 x 6 mm 250 g 9870097A001
92-005-263 S-23-P Pills 21 x 8 mm 250 g 9870097A008
92-005-261 S-26-P Pills 6 g 250 g 9870095S001
92-005-260 SA-1-G Granules 1-3 mm 100 g 9870094W001
92-005-264 SC-1-G Granules 1-4 mm 250 g 9870098X001
Ordering
Proprietary Evaporants for AR CoatingTechnical Data
High purity and consistency
Benefits
Optimized for Satisloh coating processes and machinesAssures high proven quality and high performanceProcess guarantee for Satisloh processes
Recommendations
Store in a dry placeKeep containers closed
Applications
Satisloh process families for box coaters and bell coaters
IONCOTE kappa process family
IONCOTE process family
MULTIQUARTZ process family
MULTICOTE process family
PERFORMANCE process family
HARDCOTE process family
SPECTRAFLEX process family
Customized coatings
•
•••
••
•
•
•
•
•
•
•
•
Eva
por
atio
n M
ater
ials
Guaranteed quality with materialsdesigned for Satisloh processes.
Ordering Information
Satis Code Product Product Form Specifi cation Unit Order No.
9870079R001 AR-Plus granules 1-2.5 mm 500 g 92-005-257
6500691V007 G X L Process liquid liquid 1 pc. 92-005-865
9870010Q001 HSA pills dia 20 x 6.5 mm 2 pc. 92-006-280
9870008S001 HSAK granules 1.5-3.5 mm 250 g 92-005-244
9870067X001 MIR granules <1 mm 250 g 92-005-944
9870007D001 S-1-F granules 2-4 mm 250 g 92-005-243
9870005V001 S-3-F granules 1-2.5 mm 500 g 92-005-241
9870072T001 S-4-F granules 1-4 mm 500 g 92-005-942
9870072T002 S-5-F granules 1-4 mm 500 g 92-005-255
9870003C002 S-8-G plus granules 1-3 mm 250 g 92-005-239
9870071P001 S-9-G granules 1-4 mm 250 g 92-005-254
9870068L001 S-11-P pills 6 g 250 g 92-005-252
9870003C003 S-15-G granules 0.1-1 mm 250 g 92-005-240
9870097A001 S-22-P pills 21 x 6 mm 250 g 92-005-262
9870097A008 S-23-P pills 21 x 8 mm 250 g 92-005-263
9870095S001 S-26-P pills 6 g 250 g 92-005-261
9870094W001 SA-1-G granules 1-3 mm 100 g 92-005-260
9870098X001 SC-1-G granules 1-4 mm 250 g 92-005-264
Coating l csr.usa@satis loh l 800.866.5640 2 C
AR
Con
sum
able
s
Technical
• Satisloh provides simple water repellent hydrophobic products up to latest super easy to clean oleophobic products.• Materials available for application of top coatings in the AR chamber as well as application in a separate chamber
Benefits
• Evaporants for highest super top coat performance• Easy to handle hydrophobic materials• Easy to apply towelettes available• Proven quality
Recommendations
• Keep dry, because materials are moisture sensitive• Keep containers closed• Keep SATIN products refrigerated (-15 to -20°C) for extended shelf life• Consult your Satisloh sales person to find out which hydrophobic or oleophobic product best suits your needs• Satisloh recommends Anti Slip Pad for finishing (see section finishing)
Applications
• Top coats in high vacuum chambers integrated in AR process• Top coats in separate chambers• Wipe on for store applications
Satisloh Top Coats
Provide highest top coatperformance.
Order No. Product Product Form Packing Unit Satis Code
92-005-258 Cleanvac Pills Bottle 100 pcs. 9870087H001
92-007-316 Hydrophobic tablets Pills Bottle 100 pcs.
92-006-296 Aulon Pills Bottle 100 pcs. 9870058K001
92-006-302 Top 8 pills Pills Bottle 5 pcs. 987005K005
92-005-276 Hydrophobic towelette Towelette Individual packets 100 pcs.
92-007-141 Satin 300 Pills Individual packets 10 pcs.
92-006-299 Satin 380 Pills Individual packets 10 pcs. 9870107W001
92-006-301 Satin 1200 Pills Bottle 10 pcs. 9870107W002
92-006-710 Mirage 1 shot Ampoule Bottle 5 pcs.
92-006-711 Mirage 5 shots Ampoule Bottle 5 pcs.
92-007-985 Mirage 380 Pills Individual packets 10 pcs.
92-007-528 Grip II Pills Packet 10 pcs.
92-009-196 Mirage AR Soultion Bottle 50 ml 1 bottle
Ordering Eva
por
atio
n M
ater
ialsSatisloh Top Coats
Technical Data
Satisloh provides simple water repellent hydrophobic products up to latest super easy to clean oleophobic products.Materials available for application of top coatings in the AR chamber as well as application in a separate chamber
Benefits
Evaporants for highest super top coat performanceEasy to handle hydrophobic materialsEasy to apply towelettes availableProven quality
Recommendations
Keep dry, because materials are moisture sensitiveKeep containers closedKeep SATIN products refrigerated (-15 to -20°C) for extended shelf lifeConsult your Satisloh sales person to find out which hydrophobic or oleophobic product best suits your needsSatisloh recommends Anti Slip Pad for finishing (see section finishing)
Applications
Top coats in high vacuum chambers integrated in AR processTop coats in separate chambersWipe on for store applications
•
•
••••
••••
•
•••
Provide highest top coat performance.
Ordering Information
Satis Code Product Product Form Packing Unit Order No.
9870087H001 Cleanvac pills bottle 100 pcs. 92-005-258
Hydrophobic tablets pills bottle 100 pcs. 92-007-316
9870058K001 Aulon pills bottle 100 pcs. 92-006-296
987005K005 Top 8 pills pills bottle 5 pcs. 92-006-302
Hydrophobic towelette towelette individual packets 100 pcs. 92-006-261
Satin 300 pills individual packets 10 pcs. 92-007-141
9870107W001 Satin 380 pills individual packets 10 pcs. 92-006-299
9870107W002 Satin 1200 pills bottle 10 pcs. 92-006-301
Mirage 1 shot ampoule bottle 5 pcs. 92-006-710
Mirage 5 shots ampoule bottle 5 pcs. 92-006-711
Mirage 380 pills individual packets 10 pcs. 92-007-985
Others on request.
Co
atin
g
EXCLUSIVE
PRODUCT
Coating l csr.usa@satis loh l 800.866.5640 3 C
AR
Con
sum
able
s
Technical
• Monitor crystals in diameter 13.9 mm
• Available with gold, silver and alloy coating
• Usable in most available coating systems
Benefits
• Proven quality• Provide high precision
Recommendations
• Store in a dry place
Applications
• All AR processes• All quartz monitors
Monitor Crystals
Used for high precision coating thickness control in hot and cold processes.
Order No. ProductNominal Frequency
Diameter Unit Satis Code
92-005-219 Gold, double anchor 5.98 MHz 13.9 mm 10 pcs. 7500448N018
92-005-881 Gold, double anchor, IT 5.98 MHz 13.9 mm 10 pcs. 7500448N018
Ordering
Par
tsMonitor CrystalsTechnical Data
Monitor crystals in diameter 13.9 mmAvailable with gold, silver and alloy coatingUsable in most available coating systems
Benefits
Proven qualityProvide high precision
Recommendations
Store in a dry place
Applications
All AR processesAll quartz monitors
•••
••
•
••
Ordering Information
Satis Code Product Nominal Frequency Diameter Unit Order No.
7500448N003 gold, double anchor 6 MHz 13.9 mm 10 pcs. 92-006-283
7500448N003 gold, double anchor, IT 6 MHz 13.9 mm 10 pcs. 92-005-878
7500448N013 gold, single anchor 5 MHz 13.9 mm 10 pcs. 92-006-306
7500448N018 gold, double anchor 5.98 MHz 13.9 mm 10 pcs. 92-005-219
7500448N018 gold, double anchor, IT 5.98 MHz 13.9 mm 10 pcs. 92-005-881
7500448N020 silver, single anchor 5 MHz 13.9 mm 10 pcs. 92-006-027
7500448N022 silver, double anchor 5.98 MHz 13.9 mm 10 pcs. 92-006-025
gold, double anchor 5 MHz 13.9 mm 10 pcs. 92-005-872
alloy, crystal 5.98 MHZ 13,9 mm 10 pcs. 92-007-504
alloy, crystal 5 MHZ 13,9 mm 10 pcs. 92-007-754
Used for high precision coatingthickness control in hot andcold processes.
Co
atin
g
Coating l csr.usa@satis loh l 800.866.5640 4 C
AR
Con
sum
able
s
Technical
• Liners are made of a special refractory material
• Specifically designed liners available for evaporating materials in pill form
Benefits
• Optimum results when utilizing Satisloh coating processes, machines and materials• Proven quality• Process guarantee with Satisloh processes• Long lifetime
Recommendations
• Store in a dry place
Applications
• For Satisloh coating processes using electron beam evaporation systems
• For customized coating processes using electron beam evaporation systems
• Applicable in most of the commercial electron beam evaporation systems
Crucible Liners for Electron Beam Evaporation
Provide optimum coating resultsfor all electron beam guns usedin coating systems.
Crucible Liners for Electron Beam Evaporation
Provide optimum coating resultsfor all electron beam guns usedin Satisloh and most other coating systems.
Technical Data
Liners are made of a special refractory materialSpecifically designed liners available for evaporating materials in pill form
Benefits
Optimum results when utilizing Satisloh coating processes, machines and materialsProven qualityProcess guarantee with Satisloh processesLong lifetime
Recommendations
Store in a dry place
Applications
For Satisloh coating processes using electron beam evaporation systemsFor customized coating processes using electron beam evaporation systemsApplicable in most of the commercial electron beam evaporation systems
••
•
•••
•
••
•
Par
ts
Coating l csr.usa@satis loh l 800.866.5640 5 C
AR
Con
sum
able
sCrucible Liners for Electron Beam Evaporation
Order No. Product Material Unit Satis Code
92-005-113 Liner vol. = 4 cc Granules 1 pc. 1500295H015
92-005-339 Liner vol. = 18 cc Granules 1 pc. 1500295H018
92-005-134 Liner vol. = 7 cc Granules 1 pc. 1500295H019
92-005-135 Liner vol. = 10 cc Granules 1 pc. 1500295H020
92-005-520 Liner 1 pc. 1500295H022
92-006-152 Liner flat top Pills 1 pc. 1500295H023
92-005-136 Liner vol. = 1.5 cc Pills 1 pc. 1500295H025
92-005-430 Liner vol. = 1.5 cc Granules 1 pc. 1500295H028
92-005-138 Liner vol. = 1.4 cc Granules 1 pc. 1500295H030
92-005-139 Liner CV Granules 10 pc. 1500295H031
92-005-140 Lover, CV Granules 10 pc. 1500295H032
92-006-150 Liner vol. = 22.5 cc Granules 1 pc. 1500295H035
92-005-141 Liner vol. = 1.4 cc Granules 1 pc. 1500295H037
92-005-142 Liner vol. = 4 cc Granules 1 pc. 1500295H039
92-005-143 Liner vol. = 1.8 cc Granules 1 pc. 1500295H040
92-005-340 Liner vol. = 2.85 cc Granules 1 pc. 1500295H041
92-005-144 Liner 1 pc. 1500295H043
Ordering
Coating l csr.usa@satis loh l 800.866.5640 6 C
AR
Con
sum
able
sCrucible Liners for Electron Beam Evaporation
Order No. Product Material Unit Satis Code
92-005-146 Liner vol. = 27.8 cc Granules 1 pc. 1500295H045
92-005-147 Liner vol. = 2.1 cc Pills 1 pc. 1500295H046
92-005-148 Liner 3P vol. = 10 cc S3F 1 pc. 1500295H047
92-005-149 Liner vol. = 4 cc Granules 1 pc. 1500295H048
92-005-150 Liner vol. = 7 cc Pills 1 pc. 1500295H051
92-005-151 Liner vol. = 18.5 cc Granules 1 pc. 1500295H053
92-006-146 Liner vol. = 7 cc S15G 1 pc. 1500295H057
92-005-152 Liner vol. = 2.4 cc Granules 1 pc. 1500295H070
92-005-585 Liner vol. = 28.5cc Pills 1 pc. 1500295H089
92-005-153 Liner vol. = 9 cc Granules 1 pc. 1500295H092
92-005-154 Liner vol. = 2.4 cc Granules 1 pc. 1500295H093
92-006-666 Liner vol. = 8.5 cc S15G 1 pc. 1500295H113
Ordering
15
18
3538
16
8 12
28
9 23
2131
20
23
2931
Coating l csr.usa@satis loh l 800.866.5640 7 C
AR
Con
sum
able
s
Technical
• Liners are made of special refractory metals
Benefits
• Optimized for Satisloh and other coating processes, machines and materials• Proven quality• Process guarantee with Satisloh processes• Long lifetime• Liners are made of special refractory metals
Recommendations
• Store in a dry place
Applications
• For Satisloh coating processes with thermal evaporation• For customized coating processes using thermal sources• Applicable in most of the commercial thermal sources
Evaporation Boats for Thermal Sources
High quality evaporation boatsused for all thermal sources inSatisloh coaters and mostother coaters.
Order No. Product Machine Type Material Unit Satis Code
92-006-298 Boat no. 7 Box coaters, 900, 1200 series Color substances 10 pcs. 1500295H001
92-006-295 Boat CV Box coaters, 900, 1200 series Color substances 10 pcs. 1500295H005
92-006-157 Boat no. 14 Box coaters Color substances 10 pcs. 1500295H009
92-007-627 Boat SA1G Box coaters SA1G 10 pcs. 1500295H153
92-007-628 Boat top coat Box coaters Top coats 10 pcs. 1500295H156
92-006-163 Tantalum boat BCA Box coaters 20 pcs. 1500295H054
92-006-163 Tungsten boat no. 8 Thermal sources HSAK 50 pcs. 1500295H002
Ordering
Evaporation Boats for Thermal Sources
High quality evaporation boatsused for all thermal sources inSatisloh coaters and mostother coaters.
Technical Data
Liners are made of special refractory metals
Benefits
Optimized for Satisloh and other coating processes, machines and materialsProven qualityProcess guarantee with Satisloh processesLong lifetime
Recommendations
Store in a dry place
Applications
For Satisloh coating processes with thermal evaporationFor customized coating processes using thermal sourcesApplicable in most of the commercial thermal sources
•
•
•••
•
•••
Par
tsMolybdenum Boats
Satis Code Product Machine Type Material Unit Order No.
0300112V001 crucible EV.IN 1 bell coaters with EV.IN 1 system color substances 50 pcs. 92-006-1910300112V002 crucible EV.IN 2 bell coaters with EV.IN 1 system color substances 50 pcs. 92-006-1901500148X001 cover for boat, 3 holes bell coaters color substances 100 pcs. 92-006-2841500172G001 boat no. 2 bell coaters color substances 50 pcs. 92-006-2891500172G006 boat no. 2D bell coaters color substances 50 pcs. 92-006-2821500172G002 boat no. 3 bell coaters color substances 50 pcs. 92-006-2811500172G004 boat no. 5 bell coaters color substances 50 pcs. 92-006-2971500172G005 boat no. 6 bell coaters color substances 50 pcs. 92-006-1631500172G007 boat no. 6D bell coaters color substances 50 pcs. 92-005-1291500172G008 boat no. 6S bell coaters color substances 50 pcs. 92-006-1621500295H001 boat no. 7 box coaters, 900, 1200 series color substances 10 pcs. 92-006-2981500295H004 boat no. 10 bell coaters color substances 10 pcs. 92-006-1591500295H005 boat CV box coaters, 900, 1200 series color substances 10 pcs. 92-006-2951500295H009 boat no. 14 box coaters color substances 10 pcs. 92-006-1571550341N001 boat 150B drum coater 150, thermal source color substances 10 pcs. 92-006-2921500295H153 boat SA1G box coaters SA1G 10 pcs. 92-007-6271500295H156 boat top coat box coaters top coats 10 pcs. 92-007-628
Tantalum Boats
Satis Code Product Machine Type Material Unit Order No.
1500169V001 boat AR-4 bell coaters AR substances 10 pcs. 92-006-164
1500170T001 boat AR-4D bell coaters AR substances 10 pcs. 92-006-288
1500171U001 boat ARS bell coaters AR substances 10 pcs. 92-006-286
1500295H054 boat BCA box coaters 20 pcs. 92-006-147
Tungsten Boats
Satis Code Product Machine Type Material Unit Order No.
1500295H002 boat no. 8 thermal sources HSAK 50 pcs. 92-006-287
Coating l csr.usa@satis loh l 800.866.5640 8 C
AR
Con
sum
able
s
Benefits
• Proven quality• Process guarantee for Satisloh processes
Recommendations
• Store in a dry place
Applications
• Electron bean guns, ion guns and EV.IN thermal sources for Satisloh coating systems
• Customized coating processes using thermal sources
Filaments for Electron Beam and Ion Sources
High quality filaments for electronbeam guns and ion guns for Satisloh coaters and most other coaters.
Order No. Product Specification System Unit Satis Code
92-006-192 Filament EV.IN EV.IN 50 pcs. 0300111R001
92-007-009 Filament ESV3 E.B.-Gun ESV3 1 pcs. 6500417S0012
92-006-277 Filament S ESV6 E.B.-Gun ESV6 10 pcs. 7500336J0031
92-006-293 Filament Mark II Ion gun Mark II 10 pcs. 7500800Q101
92-007-277 Filament Mark II+ Ion gun Mark II+ 10 pcs. 7500800Q417
92-006-294 Filament Mark I Ion gun Mark I 10 pcs. 7500800Q131
92-007-547 Filament Mark I+ Ion gun Mark I+ 10 pcs. 7500800Q443
92-005-229 Filament + gauge Standard emitter Temescal E.B.-Gun 5 pcs. + 1pc. 7500823P005
92-006-285 Filament TL Standard emitter Temescal E.B.-Gun 5 pcs. 7500823P122
92-005-233 Filament H.P.E. High performance emitter Temescal E.B.-Gun 10 pcs. 7500823P032
92-005-196 View port window Large 158mm x 3mm 1 pc.
92-005-195 View port window Small 1 pc.
Ordering
Par
tsC
oat
ing
Benefits
Proven qualityProcess guarantee for Satisloh processes
Recommendations
Store in a dry place
Applications
Electron beam guns, ion guns and EV.IN thermal sources for Satisloh coating systemsCustomized coating processes using thermal sources
••
•
•
•
High quality fi laments for electronbeam guns and ion guns forSatisloh coaters and most othercoaters.
Ordering Information
Satis Code Product Specifi cation System Unit Order No.
0300111R001 fi lament EV.IN. EV.IN. 50 pcs. 92-006-192
6500417S001 fi lament ESV3 E.B.-Gun ESV3 1 pc. 92-007-009
7500336J003 fi lament S ESV6 E.B.-Gun ESV6 10 pcs. 92-006-277
7500800Q101 fi lament Mark II ion gun Mark II 10 pcs. 92-006-293
7500800Q417 fi lament Mark II+ ion gun Mark II+ 10 pcs. 92-007-277
7500800Q131 fi lament Mark I ion gun Mark I 10 pcs. 92-006-294
7500800Q443 fi lament Mark I+ ion gun Mark I+ 10 pcs. 92-007-547
7500823P005 fi laments + gauge
standard emitter Temescal E.B.-Gun 5 pcs. + 1 pc.
92-005-229
7500823P122 fi lament TL standard emitter Temescal E.B.-Gun 5 pcs. 92-006-2857500823P032 fi lament H.P.E. high performance emitter Temescal E.B.-Gun 10 pcs. 92-005-233
Filaments for Electron Beam and Ion Sources
Coating l csr.usa@satis loh l 800.866.5640 9 C
AR
Acc
esso
ries
Benefits
• Proven quality• Process guarantee for Satisloh processes
Recommendations
• Store in a dry place
Applications
• For all processes using ion gun treatment
Consumables for Ion Guns
A large variety of high quality standard and customized con-sumables for ion guns.
Order No. Product Material System Unit Satis Code
92-005-222 Anode Graphite Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q132
92-005-387 Anode Inox (stainless) Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q133
92-006-019 Gas distributor Graphite Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q134
92-006-018 Insulator Sapphire ball Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q136
92-005-224 Gas distributor, special Graphite Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q144
92-005-228 Gas distributor, special Inox (stainless) Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q272
92-006-015 Insulator Ceramic Ion gun Mark I, Mark II 1 pc. 7500800Q167
92-006-017 Gas distributor Inox (stainless) Ion gun Mark II 1 pc. 7500800Q164
92-006-016 Anode Inox (stainless) Ion gun Mark II 1 pc. 7500800Q166
92-005-227 Gas distributor Graphite Ion gun Mark II 1 pc. 7500800Q174
92-006-014 Anode Graphite Ion gun Mark II 1 pc. 7500800Q175
92-006-013 Gas distributor Titanium Ion gun Mark II 1 pc. 7500800Q202
92-007-278 Anode Stainless steel Ion gun Mark II+ 1 pc. 7500800Q437
92-007-292 Gas distributor Graphite Ion gun Mark II+ 1 pc. 7500800Q423
92-007-278 Thermal transfer plate Ion gun Mark II+ 1 pc. 7500800Q427
Ordering
Consumables for Ion GunsBenefits
Proven qualityProcess guarantee for Satisloh processes
Recommendations
Store in a dry place
Applications
For all processes using ion gun treatment
••
•
•
Acc
esso
ries
Benefi t by Satisloh´s largevariety of high quality standardand customized consumablesfor ion guns.
Ordering Information
Satis Code Product Material System Unit Order No.
7500800Q132 anode graphite ion gun Mark I 1 pc. 92-005-222
7500800Q133 anode inox ion gun Mark I 1 pc. 92-005-387
7500800Q134 gas distributor graphite ion gun Mark I 1 pc. 92-006-019
7500800Q136 insulator sapphire ball ion gun Mark I 1 pc. 92-006-018
7500800Q144 gas distributor, special graphite ion gun Mark I 1 pc. 92-005-224
7500800Q272 gas distributor, special inox ion gun Mark I 1 pc. 92-005-2287500800Q167 insulator ceramic ion gun Mark I, Mark II 1 pc. 92-006-015
7500800Q164 gas distributor inox ion gun Mark II 1 pc. 92-006-017
7500800Q166 anode inox ion gun Mark II 1 pc. 92-006-016
7500800Q174 gas distributor graphite ion gun Mark II 1 pc. 92-005-227
7500800Q175 anode graphite ion gun Mark II 1 pc. 92-006-014
7500800Q202 gas distributor titanium ion gun Mark II 1 pc. 92-006-013
7500800Q437 anode stainless steel ion gun Mark II+ 1 pc. 92-007-278
7500800Q423 gas distributor graphite ion gun Mark II+ 1 pc. 92-007-292
7500800Q427 thermal transfer plate ion gun Mark II+ 1 pc. 92-007-278
Coating l csr.usa@satis loh l 800.866.5640 10 C
AR
Acc
esso
ries
Benefits
• Proven quality• Process guarantee for Satisloh processes
Recommendations
• Store in a dry place
Applications
• All Satisloh coating systems of 260/360/1200 series; 900 partly
Consumables for Electron Beam
Oil and Grease
Satisloh offers a large variety of high quality standard and customized consumables for electron beam guns.
Satisloh oil and grease are theoptimal choice to maintain thereliability of Satisloh equipment.
Order No. Product Specification System Unit Satis Code
92-005-161 Grease Silicon grease 1 pc. 2000400Z003
92-006-252 Grease Fomblin 1 pc.
92-006-116 Oil for roots pump P3 Roots pumps 5 kg. 2000501U003
92-005-163 Oil for turbo pump TL 011 Turbo pumps 1 pc. 2000501U004
92-005-167 Oil for rotary pump Ultragrade 19 Rotary pumps 4 I 2000503C003
92-005-165 Oil for roots pump Ultragrade 20 Roots pumps 4 I 2000503C002
92-006-113 Oil for rotary pump Ultragrade 70 Roots pumps 4 I 2000503C005
92-007-810 Oil for roughing pumps SP 100/200 Roughing pumps 1 kg 2000501U006
92-005-391 Oil for turbo pump SP 100/200 Turbo pumps 1 pc. 2000501U007
92-009-635 Oil 1 gallon
Ordering
Applications
Ensure performance of your coating system with regularly scheduled change-out of oils and greases.
Coating l csr.usa@satis loh l 800.866.5640 11 C
Dip
Coa
ting
Mat
eria
ls
Technical
• Satisloh provides lacquers for hard coating of lenses with superior performance.• The hard coating lacquers are designed for the application by dip coating.
Benefits
• Highest abrasion resistance• Highest adhesion• One component lacquers (no mixing needed)• Easy to handle• Proven quality• Shelf life 6 month in freezer at -15 to -20°C• Pot life approx. 12 weeks• Satisloh provides lacquers for hard coating of lenses with superior performance.• The hard coating lacquers are designed for the application by dip coating.
Recommendations
• Keep the lacquers refrigerated (-15 to -20°C)• Keep containers closed• Only use Satisloh solvents optimized for Satisloh hard coats• Follow recommendations shown in the technical data sheets
Applications
• Hard coats for CR39, polycarbonate, high index and other lens materials
• Use in Satisloh and other dip coating systems
Hard Coating Chemicals for Dip Coating
Satisloh hard coats combinesuperior performance in conjunction with AR coatings.
Order No. Product Specification System Unit
92-009-121 DN 1601 Hard coat index 1.6 Dip coaters 5 kg
92-007-759 DN 1500 Hard coat index 1.5 Dip coaters 5 kg
92-008-202 DP 200 Primer for hard coat Dip coaters 5 kg
92-007-590 DS 1601 Solvent mix for DN1601 Dip coaters 4 kg
92-007-589 DS 1500 Solvent mix for DN1500 Dip coaters 4 kg
92-007-760 PMGE Solvent general purpose Dip coaters 4 kg
92-007-692 SM-301 Flow modifier Dip coaters 100 g
Ordering
Coating l csr.usa@satis loh l 800.866.5640 12 C
Spi
n C
oatin
g M
ater
ials
Technical
• Satisloh provides lacquers for hard coating of lenses with superior performance.• The hard coating lacquers are designed for application in Satisloh spin coaters.
Benefits
• Highest abrasion resistance• Highest adhesion• One component lacquers (no mixing needed)• Easy to handle• Proven quality• Satisloh provides lacquers for hard coating of lenses with superior performance.• The hard coating lacquers are designed for application in Satisloh spin coaters.
Recommendations
• Store in clean and dry environment at room temperature.• Keep containers closed.• Use only in connection with Satisloh spin coating machines.
Technical
• Pre-coat components for lens prep.• Designed for Satisloh process and spin coat equipment.
Benefits
• Easy to handle• Proven quality• Designed specifically for Satisloh process.
Recommendations
• Store in clean and dry environment at room temperature.• Keep containers closed.• Use only in connection with Satisloh spin coating machines.
Cleaners for Spin Coating
Satisloh hard coats combine superior performance in conjunction with AR coatings.
Lens prep products
Ordering
Ordering
EXCLUSIVE
PRODUCT
EXCLUSIVE
PRODUCT
Order No. Product Specification System Unit
Solids
92-006-821 GT 100 Tintable G4 / G3 150 ml
92-006- 824 GNT 200 Non tintable G4 / G3 150 ml
Solvents
92-009-622 MS-P501 Tintable lacquer for poly Spin Coater 1 pint bottle
92-009-109 MS-P601 Non tintable lacquer for poly Spin Coater 1 pint bottle
92-008-318 MS-HR853 Non tintable lacquer for CR39, Trivex and high index Spin Coater 1 pint bottle
Order No. Product Specification System Unit
Lens Prep
92-006-552 PROPASOL Dry agent additive for DI water Spin Coater 8 pk: pints
92-006-675 PM Solvent 8 pk: pints
Lacquer for Spin Coating
Finishing l csr.usa@satis loh l 800.866.5640 1 F
Technical
• Shape/Size: 24 mm round, 18 x 24 mm ½ eye, 19 x 33 mm rugby, 17 x 33 mm small B rugby. • Design: Specially shaped to fit with Conform Finish Blocks
Benefits
• Latest finish pad technology for all lens types - including most coatings.• Unique foam material and adhesive combination provide consistent and
strong conformability to all radii.• Solid design provides greater surface area contact for increased bonding strength of block to lens.• Exclusive adhesive provides long-lasting performance for same-day pre-padding.
Recommendations
• Apply to clean, dry block.• If pre-applying to block, use within one shift.• Storage: 50-80º F and a relative humidity of 40-60%
Conform Advantage Plus Finish Pad
Ordering
Order No. Product Shape/Size Application Unit
92-009-744 Conform Advantage Plus 24 mm round Coated 1,000 / roll
92-009-745 Conform Advantage Plus 18 x 24 half eye Coated 1,000 / roll
92-009-746 Conform Advantage Plus 19 x 33 rugby Coated 1,000 / roll
92-009-747 Conform Advantage Plus 17 x 33 small B rugby Coated 1,000 / roll
Premium pad that provides superior performance on coated lenses.
Fini
sh P
ads
EXCLUSIVE
PRODUCT
Technical
• Shape/Size: 24 mm round, 18 x 24 mm ½ eye, 19 x 33 mm rugby, 17 x 33 mm small B rugby. • Design: Specially shaped to fit with Conform Finish Blocks
Benefits
• A quality finish pad at a competitive price.• Unique foam material and adhesive combination provide consistent and
strong conformability to all radii.• Solid design provides greater surface area contact for increased bonding strength of block to lens.• Exclusive adhesive provides long-lasting performance for same-day pre-padding.
Recommendations
• Apply to clean, dry block.• If pre-applying to block, use within one shift.• Storage: 50-80º F and a relative humidity of 40-60%
Conform Advantage Finish Pad
Ordering
Order No. Product Shape/Size Application Unit
92-009-740 Conform Advantage 24 mm round Uncoated 1,000 / roll
92-009-741 Conform Advantage 18 x 24 mm half eye Uncoated 1,000 / roll
92-009-742 Conform Advantage 19 x 33 rugby Uncoated 1,000 / roll
92-009-743 Conform Advantage 17 x 33 small B rugby Uncoated 1,000 / roll
Competitively priced pad that provides consistent performance on uncoated lenses.
EXCLUSIVE
PRODUCT
Finishing l csr.usa@satis loh l 800.866.5640 2 F
Technical
• Material: Special plastic composite• Design: Conformable finish block with True Center Support
Benefits
• True and constant radius eliminates center pocket and “sink” that commonly occurs with other finish blocks.• Unique “rugby” shape and center support system provides more surface contact for exceptional finishing.• Relief ring around block base reduces tearing and cracking in this critical wear area.• Because of its special material composition, Satisloh is able to offer a Recycling Return program that benefits both you and the environment.• Innovative block design combines with new composite material to provide the most durable and long-lasting finish block on the market.• Compatible with any available finishing system.
Recommendations
• Clean with water – air dry.• Use with Satisloh’s Conform Advantage, Conform Advantage Plus, and Secur-edge Finish Pads.• Do not submit to extreme heat.• Replace damaged or worn blocks.• Use with Satisloh Deblocking Pliers.
Conform Finish Block
Ordering
Order No. Product Color Unit
92-008-528 24 mm round Black 25 / bag
92-008-532 24 mm round Blue 25 / bag
92-008-529 18 x 24 mm ½ eye Black 25 / bag
92-008-533 18 x 24 mm ½ eye Blue 25 / bag
92-008-531 19 x 33 mm rugby Black 25 / bag
92-008-535 19 x 33 mm rugby Blue 25 / bag
92-008-530 17 x 33 mm small rugby (ES-4) Black 25 / bag
92-008-534 17 x 33 mm small rugby (ES-4) Blue 25 / bag
75-050-230 Deblocking pliers N/A ea
Specially-engineered True Center Support (patent pending), rather than solid block back, eliminates crazing and increases profitability.
Fini
sh B
lock
ing
EXCLUSIVE
PRODUCT
Finishing l csr.usa@satis loh l 800.866.5640 3 F
Technical
• Diameter: Large 25 mm ½ eye 20 mm
Benefits
• Flexible adaptation to the outer radius• Improved lens protection, eliminates possible surface damages during edging
Recommendations
• Clean with water - air dry.• Do not submit to extreme heat.• Replace damaged or worn blocks.
Satisloh Finish Block
Ordering
Order No. Product Color Unit
92-003-938 Satisloh Finish Block, 25 mm, round Blue 25 / bag
92-003-939 Satisloh Finish Block, ½ eye Blue 25 / bag
92-007-368 Satisloh Finish Block Black 25 / bag
92-004-201 Satisloh Finish Block, ½ eye Black 25 / bag
92-004-198 Satisloh Finish Block, large Black 25 / bag
92-007-714 Oval ES rubber clamping ring 16/22 25 / bag
92-007-911 Round ES rubber clamping ring 20 mm 25 / bag
Flexible finish block for use with Satisloh industrial edging systems.
Fin
ish
Blo
ckin
g
EXCLUSIVE
PRODUCT
Finishing l csr.usa@satis loh l 800.866.5640 4 F
Technical
• Sizes: round, ½ eye round, rugby, small• Design: specially shaped to fit with Conform Finish Block
Benefits
• Exclusive adhesive provides consistent adhesion to lens and doesn’t leave a residue after use.
• Unique solid design provides greater surface area for increased adhesion.• DIfferent block piece curvatures save adhesive• Reduced slippage• Exclusive shape to fit properly to Satisloh Conform Finish Block• Use with confidence on all lens materials, including AR.
Recommendations
• Apply to clean, dry block.• Use immediately after removing from liner.• Storage: 50-80º F and a relative humidity of 40-60%
Order No. Product Unit
92-005-721 24 x 18 mm ½ eye 1,000 / roll
92-005-720 24 mm round 2,000 / roll
92-008-584 17 x 33 mm small rugby (ES-4) 1,000 / roll
92-008-585 19 x 33 mm rugby 2,000 / roll
75-050-230 Deblocking pliers ea
Secur-edge Finish Pad
Fini
sh P
ads
Exclusive design features a solid center rather than the common open center – allowing for larger surface contact.
Ordering
EXCLUSIVE
PRODUCT
Finishing l csr.usa@satis loh l 800.866.5640 5 F
Benefits
• Special design for use with Satisloh industrial edgers• Compatible with all lens materials, including AR coatings• Convenient half-eye size eliminates trimming• Easy to remove from lenses• Built-in dispenser
Recommendations
• Apply to clean, dry block• Edge within 2 hours for best performance• Use immediately after removing from liner • Storage: 50-80°F and a relative humidity of 40-60%
Order No. Product Shape / Size Unit
92006514 3M 1701M Leap 3 Square shape 24mm 1000 pads / box
92006515 3M 1700M Leap 3 Square shape 24mm 2000 pads / box
92005539 3M 1696M Leap 3 Oblong shape 18x28mm 1000 pads / box
92005540 3M 1695M Leap 3 Round shape 24mm 2000 pads / box
92006516 3M 1693M Leap 3 Round shape 18mm 1000 pads / box
92006518 3M 1692M Leap 3 Round shape 26mm 1000 pads / box
92006651 3M 1712NR Leap 3 Oblong shape for Nidek 1000 pads / box
92006724 3M 1708 LSE Round for super-hydro 24mm 1000 / roll
92006723 3M 1707 LSE Oval for super-hydro 18mm 1000 / roll
92009645 3M 1712 LSE Nidek style for super hydro 17 x 30mm 500 / roll
92009646 3M 1724 LSE Satisloh small rugby for super-hydro 17 x 30mm 500 / roll
92009647 3M 1725 LSE Satisloh rugby for super-hydro 19 x 30mm 500 / roll
92007856 3M 1697 Leap 3 Special small B size 24 x 18mm 1000 pads / box
Ordering
3M™ Finishing Pad
Fini
sh P
ads
Optimized for use with Satislohindustrial edgers but also compatible with other finishing systems.
Finishing l csr.usa@satis loh l 800.866.5640 6 F
Technical
• Shape: round• Diameter: 35 mm
Benefits
• Improved protection of lenses - eliminates surface damages during edging process.
• Improved adhesion - holds lenses safely and stable, eliminates any lens torsion.• Easy peel off after edging, no glue residue remaining.
Recommendations
• Apply on the back of lenses before edging.
Order No. Product Unit
92-006-513 3M 1647 Blue Chip Pro 2000 / roll
Ordering
Lens Protective Blue Pad
Fin
ish
Lens
Pro
tect
ion
Protects the lens when edgingand avoids torsion.
Benefits
• High lens protection - avoids surface damages during edging process• Improved adhesion - holds lenses safely and stable, eliminating lens torsion
Recommendations
• Especially used for all super hydrophobic lenses
Ordering
Anti Slip Pad
Provides high lens protection,no torsion, recommended forall super hydrophobic coatings.
Order No. Product Unit
92-006-069 Anti slip pad high performance 500 / pack
Finishing l csr.usa@satis loh l 800.866.5640 7 F
Ordering
Job Trays
Job
Tra
ys
Satisloh job trays for surfacingand finishing processes.
Technical
• Satisloh combi tray can be used for both surfacing and finishing• Available in standard colors • Designed for Satisloh automated handling systems
Benefits
• Due to a special locating device, the tray holds Satisloh blocking chucks, blocked lenses ready for the finishing process and lenses that have not yet been blocked.• Also available: Plastic envelope for the job ticket and tray divider
Order No. Product Blocking Style Color Unit
Satisloh Blocking Style
92-004-727 Combi Satisloh White 20 pieces
92-004-730 Combi Satisloh Blue 20 pieces
92-004-731 Combi Satisloh Red 20 pieces
92-004-732 Combi Satisloh Green 20 pieces
92-004-733 Combi Satisloh Yellow 20 pieces
Nidek Blocking Style
92-009-340 Combi Nidek White 20 pieces
92-009-341 Combi Nidek Blue 20 pieces
92-009-342 Combi Nidek Red 20 pieces
92-009-343 Combi Nidek Green 20 pieces
92-009-344 Combi Nidek Yellow 20 pieces
92-009-058 Tray Divider Both Clear 1
92-004-450 Rubber Lens Protector NA Black 1
92-000-763 Job Ticket Cover 220 x 135 mm Plastic 10 pieces
Further colors available on request
EXCLUSIVE
PRODUCT
Finishing l csr.usa@satis loh l 800.866.5640 8 F
Ordering
Ordering
Edging Tools ES-2 / ES-3 / ES-4
Dressing Stones for Diamond Tools
Cut
ters
/ D
iam
onds
The combi tools provide all featuresof edging process in one tool: beveling, grinding, grooving, pre-polishing as well as fine polishing. The tool is mounted and balanced very precisely in order to achieve the high speed cutting process.
Tool
s Edging Tools ES-2 / ES-3 / ES-4Technical Data
Process all organic material like CR39, high index as well as polycarbonateThe tool segments can be changed easily by the operator.The combi tool is equipped with: PCD cutting ring, sintered pre- and fine polishing tool, PCD beveling lathing tips, sintered beveling rings as well as the carbide tips for grooving.
Benefits
Combine all process steps in one toolProvide long lifetimes
Recommendations
As a separate tool we offer the drill which allows an in-chamber drilling.
Packing Unit Order No.
ES-4 wheel 57x20 PCD/K20/6 teeth 1 pc. 92-007-753
ES wheel 60x20 PCD/K20/6 teeth 1 pc. 92-004-079
ES-3 grooving bit +6° 0.7 mm poly 1 pc. 92-005-111
ES-3 grooving bit -6° 0.7 mm CR39 1 pc. 92-005-112
ES-3 grooving bit -6° 1.2 mm CR39 1 pc. 92-005-113
ES-3 grooving bit +6° 1.2 mm poly 1 pc. 92-005-114
ES-3 grooving bit -6° 0.9 mm CR39 1 pc. 92-005-573
ES-3 grooving bit -6° 0.8 mm CR39 1 pc. 92-005-572
ES-3 grooving bit +6° 0.9 mm poly 1 pc. 92-005-577
ES-3 grooving bit -6° 1.0 mm CR39 1 pc. 92-005-574
ES-3 grooving bit +6° 0.8 mm poly 1 pc. 92-005-576
ES-3 grooving bit +6° 1.0 mm poly 1 pc. 92-005-578
ES-3 grooving bit +6° 1.1 mm poly 1 pc. 92-005-579
ES-3 pin bevel lathing bit PCD +6° 1 pc. 92-005-108
ES-3 pin bevel lathing bit PCD -6° 1 pc. 92-005-658
ES-4 pin bevel lathing tip poly for big tool hub 1 pc. 92-005-108
ES-4 pin bevel lathing tip CR39 for big tool hub 1 pc. 92-005-658
ES-4 pin bevel lathing tip poly for small tool hub 1 pc. 92-007-695
ES-4 pin bevel lathing tip CR39 for small tool hub 1 pc. 92-007-696
ES pin bevel wheel 60 x 3.2 30°/D36/C50 1 pc. 92-004-736
ES pin bevel wheel 60 x 6 30°/D36/C50 1 pc. 92-004-561
ES V-disc-couple D36, C50/D7, C100 1 pc. 92-004-560
ES V-disc-couple D36, C50/D7, C115 1 pc. 92-005-024
ES V-disc-couple D36, C50/D7, C115 115° 1 pc. 92-005-531
ES V-disc-couple D36, D7 1 pc. 92-007-303
ES disc-couple plano D36, C50/D7,C100 1 pc. 92-004-826
Drill bit 0.8 x 6 mm 1 pc. 92-007-752
•
••
••
•The combi tools provide all fea-tures of edging process in one tool: beveling, grinding, grooving, pre-polishing as well as fi ne-polishing. The tool is mounted and balanced very precisely in order to achieve the high speed cutting process.
Tool
s Dressing Stones for Diamond ToolsPacking Unit Order No.
Re-truing stone ES II green 33x18x15 mm for dulling the polish disc 1 pc. 92-004-769
Re-truing stone ES II pink 31x18x15 mm for sharpening the polish disc
1 pc. 92-004-768
Re-truing stone ES II white 35x18x15 mm for sharpening the polish disc
1 pc. 92-004-767
For sharpening and adjusting diamond tools.
Technical
• Process all organic material like CR39, high index as well as polycarbonate• The tool segments can be changed easily by the operator• The combi tool is equipped with: PCD cutting ring, sintered pre- and fine polishing tool, PCD beveling lathing tips, sintered beveling rings as well as the carbide tips for grooving
Benefits
• Combine all process steps in one tool• Provide long lifetimes
Recommendations
• As a separate tool we offer the drill which allows in-chamber drilling
Order No. Product Unit
92-007-753 ES-4 wheel 57x20 PCD/K20/6 teeth 1 pc.
92-004-079 ES wheel 60x20 PCD/K20/6 teeth 1 pc.
92-005-111 ES-3 grooving bit +6° 0.7 mm poly 1 pc.
92-005-112 ES-3 grooving bit -6° 0.7 mm CR39 1 pc.
92-005-113 ES-3 grooving bit -6° 1.2 mm CR39 1 pc.
92-005-114 ES-3 grooving bit +6° 1.2 mm poly 1 pc.
92-005-573 ES-3 grooving bit -6° 0.9 mm CR39 1 pc.
92-005-572 ES-3 grooving bit -6° 0.8 mm CR39 1 pc.
92-005-577 ES-3 grooving bit +6° 0.9 mm poly 1 pc.
92-005-574 ES-3 grooving bit -6° 1.0 mm CR39 1 pc.
92-005-576 ES-3 grooving bit +6° 0.8 mm poly 1 pc.
92-005-578 ES-3 grooving bit +6° 1.0 mm poly 1 pc.
92-005-579 ES-3 grooving bit +6° 1.1 mm poly 1 pc.
92-005-108 ES-3 pin bevel lathing bit PCD +6° 1 pc.
92-005-658 ES-3 pin bevel lathing bit PCD -6° 1 pc.
92-007-695 ES-4 pin bevel lathing tip poly for small tool hub 1 pc.
92-007-696 ES-4 pin bevel lathing tip CR39 for small tool hub 1 pc.
92-004-736 ES pin bevel wheel 60 x 3.2 30°/D36/C50 1 pc.
92-004-561 ES pin bevel wheel 60 x 6 30°/D36/C50 1 pc.
92-004-560 ES V-disc-couple D36, C50/D7, C100 1 pc.
92-005-024 ES V-disc-couple D36, C50/D7, C115 1 pc.
92-005-531 ES V-disc-couple D36, C50/D7, C115 115° 1 pc.
92-007-303 ES V-disc-couple D36, D7 1 pc.
92-004-826 ES disc-couple plano D36, C50/D7,C100 1 pc.
92-007-752 Drill bit 0.8 x 6 mm 1 pc.
Order No. Product Unit
92-004-769Green ES-2/3/4 Dulling stone
1 ea.
92-004-768Pink ES-2/3/4 Sharpening stone
1 ea.
92-004-767White ES-2/3/4 Sharpening stone
1 ea.
Finishing l csr.usa@satis loh l 800.866.5640 9 F
Ordering (Blade Options)
Ordering
7E / 7Ex Dual Polish Assembly
Edg
er C
utte
r B
lade
s
High Luster Polish: 02-054-033 (90833)
Standard Polish: 02-054-035 (90825)
Technical
• Number of cuts dependent on material mix
Benefits
• Accepts any 1" blade
Recommendations
• Change blades as needed for maximum cutting quality.
Order No. Product Bevel Unit NOP Code
92-007-868 NBA 30 Deg Cutter w/ Sharp Bevel 30° 1 93194
92-007-869 NBA Cutter with 0.25” Flat 30° 1 93196
92-007-870 Fendall Safe T 115° 1 93195
92-007-871 Liberty 100° 1 93372
92-008-000 Hi-Wrap 1 54°/30° 1 93342
92-007-893 Hi-Wrap 2 44°/40° 1 93344
92-007-892 Shallow Bevel 44°/40° 1 93080
92-007-875 Hilco Sport Goggle w/ sharp bevel 50° 1 93366
92-007-876 Hilco Sport Goggle w/ flat bevel 50° 1 93422
92-008-234 Light Bender NA 2 93275
Order No. Product Bevel Unit NOP Code
92-007-884 Carbide Cutter Standard 10 / pk 93072
92-008-052 Coated Cutter Standard 1 93074
92-008-265 Diamond Cutter Standard 1 93075
92-009-313 Micro Edge Cutter Standard 10 / pk NA
Finishing l csr.usa@satis loh l 800.866.5640 10 F
Ordering
7E / 7Ex Multi-Cutter Body Assembly
Edg
er C
utte
r B
lade
s
Includes one 1" cutter and choose from three ½" specialty cutters.
Benefits
• One cutter houses 4 blades: one 1" cutter and three ½" specialty cutters.• Avoid changing blades.• Avoid sorting work and need for separate bodies.• Switch between tool hubs in minutes and avoid unnecessary calibrations.
Recommendations
• Change blades as needed for maximum cutting quality.• Ensure blade space is clean before inserting new blade.• Ensure new blade is completely seated down and to the right.
Order No. Product Bevel Unit NOP Code
92-007-868 NBA 30 Deg Cutter w/ Sharp Bevel 30° 1 93194
92-007-869 NBA Cutter with 0.25” Flat 30° 1 93196
92-007-870 Fendall Safe T 115° 1 93195
92-007-871 Liberty 100° 1 93372
92-008-000 Hi-Wrap 1 54°/30° 1 93342
92-007-893 Hi-Wrap 2 44°/40° 1 93344
92-007-892 Shallow Bevel 44°/40° 1 93080
92-007-875 Hilco Sport Goggle w/ sharp bevel 50° 1 93366
92-007-876 Hilco Sport Goggle w/ flat bevel 50° 1 93422
92-008-232 Light Bender NA 1 93275
92-007-891 Shelving NA 1 93418
02-504-036 Multi-Cutter Body NA 1 90812
Finishing l csr.usa@satis loh l 800.866.5640 11 F
Ordering
Ordering
7E / 7Ex High Wrap 2 Polish Assembly
7E / 7Ex Shallow Polish Assembly
Edg
er C
utte
r B
lade
s
Three-axis high-wrap edging.
Polishes bevel geometry.
Benefits
• With unique bevel geometry, greatly improve 3-axis high wrap edging.• Ability to polish bevel geometry.• Avoid changing blades.• Switch between tool hubs in minutes and avoid unnecessary calibrations.
Recommendations
• Change blades as needed for maximum cutting quality.• Ensure blade space is clean before inserting new blade.• Ensure new blade is completely seated down and to the right.
Benefits
• With thin eyeware frames, utilize shallow beveling to hide excess bevel height.• Ability to polish bevel geometry.• Avoid changing blades.• Switch between tool hubs in minutes and avoid unnecessary calibrations.
Recommendations
• Change blades as needed for maximum cutting quality.• Ensure blade space is clean before inserting new blade.• Ensure new blade is completely seated down and to the right.
Order No. Product Bevel Unit NOP Code
92-007-893 Hi-Wrap 2 Blade 44°/40° 1 93344
02-054-038 Hi-Wrap 2 Polish Assembly NA 1 90827
Order No. Product Bevel Unit NOP Code
92-007-892 Standard Cutter 44°/40° 1 93080
02-054-037 Shallow Polish Assembly NA 1 90831
Finishing l csr.usa@satis loh l 800.866.5640 12 F
Ordering
Ordering
7E / 7Ex 5° Taper Polish Assembly
7E / 7Ex End Mill Assembly
Edg
er C
utte
r B
lade
s
Able to hide excess material on thick lenses.
Ability to cut unique shapes that large diameter wheel edgers cannot.
Benefits
• Commonly referred to as Hide-A-Beveling.• The 5° flat tapered area helps to hide excess material on thick lenses.• Ability to polish bevel geometry.• Avoid changing blades.• Switch between tool hubs in minutes and avoid unnecessary calibrations.
Recommendations
• Change blades as needed for maximum cutting quality.• Ensure blade space is clean before inserting new blade.• Ensure new blade is completely seated down and to the right.
Benefits
• Avoid changing blades.• Switch between tool hubs in minutes and avoid unnecessary calibrations.
Recommendations
• Change blades as needed for maximum cutting quality.• Ensure blade space is clean before inserting new blade.• Ensure new blade is completely seated down and to the right.
Order No. Product Bevel Unit NOP Code
92-007-894 Bevel and Taper Blade 115°/5° Taper 1 93435
02-054-039 5° Taper Polish Polish Assembly NA 1 90832
Order No. Product Bevel Unit NOP Code
92-007-884 Carbide Cutter Standard 10 / pk 93072
92-008-052 Coated Cutter Standard 1 93074
92-008-265 Diamond Cutter Standard 1 93075
92-007-895 End Mill 3/32 (1.2 mm radius) 93751
92-007-896 End Mill 1/16 (0.8 mm radius) 93745
92-007-897 End Mill 1 mm (0.5 mm radius) 93756
92-008-298 Square Blade Bevel 93348
02-054-040 End Mill Assembly 90811