9
Course Cisco Certified Network Associate (CCNA) Course Objectives Upon completion of this course, participants should be able to: Describe how networks function, identifying major components, function of network components and the Open System Interconnection (OSI) reference model. Using the hosttohost packet delivery process, describe issues related to increasing traffic on an Ethernet LAN and identify switched LAN technology solutions to Ethernet networking issues. Describes the reasons for extending the reach of a LAN and the methods that can be used with a focus on RF wireless access. Describes the reasons for connecting networks with routers and how routed networks transmit data through networks using TCP / IP. Describe the function of Wide Area Networks (WANs), the major devices of WANs, and configure PPP encapsulation, static and dynamic routing, PAT and RIP routing. Use the commandline interface to discover neighbours on the network and managing the router startup and configuration. Expand the switched network from a small LAN to a mediumsized LAN with multiple switches, supporting VLANs, trunking, and spanning tree. Describe routing concepts as they apply to a mediumsized network and discuss considerations when implementing routing on the network. Configure, verify, and troubleshoot OSPF. Configure, verify, and troubleshoot EIGRP. Determine how to apply ACLs based on network requirements, and to configure, verify, and troubleshoot ACLs on a mediumsized network. Describe when to use NAT or PAT on a mediumsized network, and configure NAT or PAT on routers. Identify and implement the appropriate WAN technology based on network requirements.

Contents Modul CCNA

Embed Size (px)

DESCRIPTION

Contents Modul CCNA

Citation preview

Page 1: Contents Modul CCNA

 

 

Course 

Cisco Certified Network Associate (CCNA) 

 

Course Objectives 

Upon completion of this course, participants should be able to:  

∙ Describe  how  networks  function,  identifying  major  components,  function  of  network components and the Open System Interconnection (OSI) reference model.  

∙ Using the host‐to‐host packet delivery process, describe issues related to increasing traffic on an Ethernet LAN and identify switched LAN technology solutions to Ethernet networking issues.  

∙ Describes the reasons for extending the reach of a LAN and the methods that can be used with a focus on RF wireless access.  

∙ Describes  the  reasons  for  connecting  networks with  routers  and  how  routed  networks transmit data through networks using TCP / IP.  

∙ Describe  the  function of Wide Area Networks  (WANs),  the major devices of WANs,  and configure PPP encapsulation, static and dynamic routing, PAT and RIP routing. 

 ∙ Use the command‐line interface to discover neighbours on the network and managing the 

router startup and configuration.  

∙ Expand the switched network from a small LAN to a medium‐sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree.  

∙ Describe routing concepts as they apply to a medium‐sized network and discuss considerations when implementing routing on the network.  

∙ Configure, verify, and troubleshoot OSPF.  

∙ Configure, verify, and troubleshoot EIGRP.  

∙ Determine how to apply ACLs based on network requirements, and to configure, verify, and troubleshoot ACLs on a medium‐sized network.  

∙ Describe when to use NAT or PAT on a medium‐sized network, and configure NAT or PAT on routers.  

∙ Identify and implement the appropriate WAN technology based on network requirements. 

 

 

Page 2: Contents Modul CCNA

 

 

Curricula Portfolio 

 

 

 

 

 

 

 

 

 

 

  

Certification Level 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 3: Contents Modul CCNA

 

 

Path to CCNA Certification 

 

 

 

 

 

 

 

 

 

 

 

 

Flexibility and Course Sequence 

 

 

 

 

 

 

 

 

 

 

 

 

Option  1  Option  2 

Option  3

Page 4: Contents Modul CCNA

 

 

Course Outlines 

 

Ch  Module 1:  Network Fundamentals 

Module 2: Routing Protocols and Concepts 

Module 3: LAN Switching and Wireless 

Module 4: Accessing the WAN 

1  Living in a Network‐Centric World 

 Introduction to Routing and Packet Forwarding 

LAN Design Introduction to WANS

2  Communicating over the Network 

Static Routing Basic Switch Concepts and Configuration 

PPP 

3  Application Layer Functionality and Protocols 

 Introduction to Dynamic Routing Protocols 

VLANS Frame Relay

4  OSI Transport Layer    Distance Vector Routing Protocols 

VTP Network Security

5  OSI Network Layer  RIP version 1 STP ACLs 

6  Addressing the Network ‐ IPv4 

VLSM and CIDR Inter‐VLAN Routing  Teleworker Services

7  Data Link Layer RIPv2 Basic Wireless Concepts and Configuration 

IP Addressing Services 

8  OSI  Physical Layer  The Routing Table: A Closer Look 

Network Troubleshooting 

9  Ethernet  EIGRP  

10  Planning and Cabling Your Network  

Link‐State Routing Protocols 

 

11  Configuring and Testing Your Network  

OSPF  

 

 

 

 

   

Page 5: Contents Modul CCNA

 

Training/Course Programme Schedule 

i) CCNA Exploration 1: Network Fundamentals  

Masa / Tarikh 

8.30 ‐ 

9.00 

9.00 ‐ 

10.30 

10.30‐ 

11.00

11.00 ‐ 

12.30 

12.30‐ 

02.30

02.30 ‐ 

04.00 

04.30 ‐ 

05.00 

 Isnin  

Pendaftaran & Taklimat Kursus  

Introduction Chapter 1:  Living in a Network Centric World 

  M I N U M   P A G I 

Chapter 2:  Communicating over the Network  

M A K A N  T E N G A H A R I 

 Chapter 3:  Application Layer Functionality  and Protocols 

Chapter 4:  OSI Transport Layer 

 Selasa  

Chapter 5:  OSI Network Layer 

Chapter 6:  Addressing the  Network ‐ IPv4 

Chapter 7:  OSI Data Link Layer 

Chapter Review / Test 

Aktiviti 

 Rabu  

Chapter 8:  OSI Physical Layer 

Chapter 9:  Ethernet 

Chapter 10: Planning & Cabling Network 

Chapter Review / Test Aktiviti 

 Khamis  

Chapter 11:  Configuring & Testing Your Network 

Chapter Review / Test 

Aktiviti 

Chapter Review / Test 

Aktiviti 

Chapter Review / Test Aktiviti 

Jumaat  Final Test  Skill—Based Assessment Lab  Skill—Based Assessment Lab 

Closing Remarks 

 

 

 

Page 6: Contents Modul CCNA

 

ii) CCNA Exploration 2: Routing Protocols & Concepts 

Masa / Tarikh 

8.30 ‐ 

9.00 

9.00 ‐ 

10.30 

10.30‐ 

11.00

11.00 ‐ 

12.30 

12.30‐ 

02.30

02.30 ‐ 

04.00 

04.30 ‐ 

05.00 

 Isnin  

Pendaftaran & Taklimat Kursus 

Chapter 1:  Introduction to Routing and Packet Forwarding   

 M I N U M   P A G I 

Chapter 2:  Static Routing 

  M A K A N  T E N G A H A R I 

Chapter 3:   Introduction to Dynamic Routing Protocols 

Chapter 4:  Distance Vector Routing Protocols  

 

 Selasa  

Chapter 5:  Routing Internet Protocol (RIP) version 1

Chapter 6:  Variable Length Subnet Mask (VLSM) & CIDR 

Chapter 7:  Routing Internet Protocol (RIP) version 2 

Chapter Review / Test 

Aktiviti 

 Rabu  

Chapter 8:  The Routing Table:  A Closer Look 

Chapter 9:  EIGRP  

Chapter 10:  Link‐State Routing Protocols  

Chapter Review / Test Aktiviti 

 Khamis  

Chapter 11:  OSPF 

Chapter Review / Test 

Aktiviti 

Chapter Review / Test 

Aktiviti 

Chapter Review / Test Aktiviti 

Jumaat  Final Test  Skill—Based Assessment Lab 

Skill—Based Assessment Lab 

Closing Remarks 

       

Page 7: Contents Modul CCNA

 

iii) CCNA Exploration 3: LAN Switching & Wireless 

Masa / Tarikh 

8.30 ‐ 

9.00 

9.00 ‐ 

10.30 

10.30‐ 

11.00

11.00 ‐ 

12.30 

12.30‐ 

02.30

02.30 ‐ 

04.00 

04.30 ‐ 

05.00 

 Isnin  

Pendaftaran & Taklimat Kursus 

Chapter 1:  LAN Design    

 M I N U M   P A G I 

Chapter 2:  Basic Switch Concepts and Configuration 

M A K A N  T E N G A H A R I 

Chapter Review / Test Aktiviti 

 Selasa  

Chapter 3:  Virtual LAN (VLANs)  

Chapter 4:  VLAN Trunking Protocol (VTP) 

Chapter Review / Test Aktiviti 

 Rabu  

Chapter 5:  Spanning‐Tree Protocol (STP)  

Chapter 6:  Inter‐VLAN Routing 

Chapter Review / Test Aktiviti 

 Khamis  

Chapter 7:  Basic Wireless Concepts and Configuration 

Chapter Review / Test Aktiviti  Chapter Review / Test Aktiviti 

Jumaat  Final Test  Skill—Based Assessment Lab  Skill—Based Assessment Lab 

Closing Remarks 

         

Page 8: Contents Modul CCNA

 

iv) CCNA Exploration 4: Accessing the WAN 

Masa / Tarikh 

8.30 ‐ 

9.00 

9.00 ‐ 

10.30 

10.30 ‐ 

11.00 

11.00 ‐ 

12.30 

12.30‐ 

02.30

02.30 ‐ 

04.00 

04.30 ‐ 

05.00 

 Isnin  

Pendaftaran & Taklimat Kursus 

Chapter 1:   Introduction to WAN  

   M I N U M   P A G I 

Chapter 2:  Point to Point (PPP) 

M A K A N  T E N G A H A R I 

Chapter Review / Test Aktiviti 

 Selasa  

Chapter 3:  Frame Relay  

Chapter 4:  Network Security  

Chapter Review / Test Aktiviti 

 Rabu  

Chapter 5:  Access Control Lists (ACLs)  

Chapter 6:  Teleworker Service 

Chapter Review / Test Aktiviti 

 Khamis  

Chapter 7:  IP Addressing Services 

Chapter 8:  Network Troubleshooting 

Chapter Review / Test Aktiviti 

Jumaat  Final Test  Skill—Based Assessment Lab Skill—Based Assessment Lab Closing Remarks 

 

 

 

   

Page 9: Contents Modul CCNA

 

 

Target Participants 

Open to all IT Officer (Pegawai Teknologi Maklumat ‐ F41 dan ke atas) and Asst. IT Officer (Penolong Pegawai Teknologi Maklumat ‐ F29 ke atas) in Malaysia Public Sector.  Maximum 20 participants for each session. 

How to apply 

Apply Online ( http://www.intanbk.intan.my ) 

Contact  

ICT Specialist Development Programme National Institute of Public Administration (INTAN) INTAN Bukit Kiara 50480 Kuala Lumpur Tel: 03‐2084 7777 (ext: 7730) Fax: 03‐2084 7700