CONTENTS OF CURRICULUM VITAE

Dr. Niaz Ahmad Akhtar/Curriculum Vitae

1

CONTENTS OF CURRICULUM VITAE

Sr. No. Contents Page No.

1.0 Personal Record 02

2.0 Academic Record 02

3.0 Administrative Experience 02

4.0

5.0

International Experience

Employment Record

03

03

6.0 National & International Awards Received 03

7.0 National Contribution 03

8.0

9.0

New Initiative in universities

Research Publication/ Books Published

04

05

10.0 Member Research Committee for selection of VCs/Rectors 05

11.0 Ph.D. Thesis successfully Supervised 05

12.0

13.0

14.0

15.0

Books Published

Funding Received

National/International Conferences Organized

Conferences Participation

06

06

07

07

16.0 Editor in Chief of Research Journals 08

17.0 Member Board of Directors 08

18.0 International Linkages established 09

19.0 Research Publications 09


2

1.0 Personal Record

2.0

Academic Record

Examination Session Division Subject Institution

Matric/SSC 1977 First Pre-Eng. Multan Board

Intermediate 1979 First Pre-Eng. Multan Board

MSc/BSc (Eng.) 1985-86 First Chemical Eng. Punjab University, Lahore.

Ph.D. 1995 NA Chemical Eng. University of Leeds, UK.

3.0

Administrative Experience

Jun 2018 – to date Vice Chancellor, University of the Punjab, Lahore

Jan 2019 – Jun 2020 Vice Chancellor, Information Technology University,

Lahore (Additional Charge)

Apr 2019 – Jun 2019 Vice Chancellor, University of Engineering & Technology,

Taxila (Additional Charge)

Dec 2014 – Jun 2018 Vice Chancellor, University of Engineering& Technology,

Taxila

Aug 2009 – Dec 2014 Rector, National Textile University, Faisalabad

2012-2018 Vice Chairman (Punjab), Pakistan Engineering Council

2004-2009 Director, Institute of Quality and Technology Management,

University of the Punjab, Lahore

2005-2009 Director, Quality Enhancement Cell, University of the

Punjab, Lahore

2005-2007 Advisor Students, University of the Punjab. Lahore

2002-2004 Deputy Chairman Hall Council, University of the Punjab,

Lahore

2002-2004 Head Quality Management Division, University of the

Punjab, Lahore

Engr. Dr. Niaz Ahmad Akhtar (Sitara-i-Imtiaz)

VICE CHANCELLOR

University of the Punjab, Lahore

E-mail : [email protected]

[email protected]

mailto:[email protected]


3

5.0 Employment Record

Nov. 1985 - Nov. 1987 Worked as a Chemical Engineer in Higher Polymer

Industry, Lahore

Dec. 1987 - Sept.1988 Worked as a A.E (Chemical) in PAEC

Oct. 1988 - July 1995 Lecturer in Chemical Technology at the Institute of

Chemical Engg. & Technology, Punjab University Lahore-

July 18, 1995- to 1998 Assistant Professor in Chemical Engg. at Punjab

University.

July 1999 - Jan. 23, 2003 Associate Professor, at Inst. of Chemical Engineering &

Technology

Jan. 24, 2003- July 31, 2009 Professor, Punjab University, Lahore.

Aug 1, 2009 –Dec 17, 2014 Rector at National Textile University, Faisalabad.

December 18,2014- June 05,

2018

June 08, 2018 – To date

Vice Chancellor University of Engineering & Technology,

Taxila.

Vice Chancellor University of the Punjab, Lahore

6.0

National & International Awards Received

i) Sitara-i-Imtiaz, Government of Pakistan- 2015

ii) Outstanding Performance Award of Gold Medal from the of BOG of National

Textile University, Faisalabad 2015

iii) Outstanding Performance Award from State of Bahrain 1999

iv) Pakistan Engineering Council Gold Medal -2017

v) Pakistan Institute of Chemical Engineers Gold Medal -2016

vi) Institution of Engineers Pak. National Award of Excellence, 2008, 2009 & 2015

7.0 National Contributions

A- New Institutions Established/Revived

1. Established New Discipline of Quality Management at Punjab University in 2002

2. Established Institute of Quality and Technology Management in 2004

3. Established Quality Enhancement Cell, University of the Punjab in 2005

4. Revived National Textile University, Faisalabad

5. Revived Plastic Technology Center (PTC), Karachi

6. Revived Synthetic Fiber Development Center (SFDC), Karachi

7. Established National Textile Research Center (NTRC), Faisalabad

B- Academic Initiatives

1. Designed and Launched MS and PhD Total Quality Management Program at

Punjab university in 2002 and 2003 respectively, first time in the Country.

2. Launched Industrial Engineering and Management Program in 2006

3. Launched M.Sc. Quality & Performance Management Program first time in the

Country in 2009

4. PhD Textile Engineering at National Textile University (NTU)

4.0 International Experience

1. Chairman Engineering Accreditation Board/Committee for the Washington Accord (2010-

2017) through which Pakistan became full Member

2. Senior Lecturer and Head Chemical Engineering Discipline in BTI, State of Bahrain for 3

Years (1998-2001)


4

5. Launched 4 new Technology Programs in UET, Taxila

Automotive Technology

Bio-Medical Technology

Energy Technology

Cyber Security Technology

C- Research Initiative

1. Successfully Supervised 12 Ph Ds in the field of Chem. Eng. and TQM

2. Chief editor Journal of Quality and Technology Management in 2005

3. Chief Editor, Launched International Journal of Quality and Innovation 2009-

2017 4. Total Research Articles = 80

5. Total Books written = 4

6. Conferences organized = 7

A- UET, Taxila

1. Launched 12 New BS, MS, & PhD Programs

2. Enhanced research productivity six times through special incentives in MS &

PhD programs

3. New Centers Established

Technology Incubation Center

Staff Development Center

e-Rozgar Center

Social Entrepreneurship Center

4. New Departments Established

Computer Sciences

Electronics Engineering

Environmental Engineering

Industrial Engineering

Basic Sciences

5. Physical Infrastructure Added of Amount Rs. 1000 Million

Hostels

Flats

New departments

Boundary Wall

6. Got approved University Statues - 2017

B- National Textile University

1. Launched new program in Textile Engineering

PhD Program in Textile Engineering

Textile Design

Fashion Design

Polymer Engineering

2. Established National Textile Research Centre

8.0 New Initiative Taken in Universities


5

3. HRD 30 Faculty members sent for PhD studies in Europe

4. Revived NTU, SFDAC & PTC

5. Received 60 Million Dollars grant from KOICA for NTRC

C- University of the Punjab

1. Established Institute of Quality & Technology Management & Quality

Enhancement Cell

2. New programs Launched

BS IE & M

MSc Quality & Performance Management

MS TQM (Total Quality Management)

PhD TQM (Total Quality Management)

3. Successfully Supervised 12 PhD Students

4. Received Funding from HEC for construction of IQTM Rs. 40 Million

5. For strengthening and upgradation of Departments ~ Rs 1000 Million

D-

a. Research Publications = 67

b. National and International Conference = 21

c. Books Written = 04

d. PhD Supervised = 12

10.0 Member Search Committee for selection of VCs/Rectors

11.0

Ph.D. Thesis successfully Supervised

1) “Control of Oxides of Nitrogen and Sulphur from Coal Fixed Circulating Fluidized Bed

Combustor” by Abdullah Khan Durrani.

2) “Development of Pharmaceutical Distribution model for Customer Satisfaction” by

Muhammad Usman Awan.

2014 Member Search Committee for selection of Rector PIEAS

2016 Member Search Committee for selection of Rector PIEAS

2015 Member Senate Committee for selection of VC, MUST, AJK

2016 Member Search Committee for selection of VC, University of Poonch, AJK

2016 Member Search Committee for selection of VC, AJK University,

Muzaffarabad

2017 Member Search Committee for VC Selection, HITEC, Taxila

9.0 Research Publication / Books, Published Research paper peer

reviewed Journal National/International


6

3) “Implementation of Quality Management Techniques to improve the Quality of Yarn in

Textile Industry” by Tajjamal Hussain.

4) “Indigenous Model of Higher Education Reforms in Pakistan: Higher Education

Quality Assurance Initiative” by Muhammad Khalid Khan.

5) Optimum Software Process Improvement Paradigm for Quality Practices in Software

Industry by Faisal Tehseen Shah

6) “Analysis of the Pesticide Residues and

their Impact on Quality of Ground Water, Soil and Primary Products” by Sajjad Ahmad

Baig.

7) “Heat Transfer investigation in a circulating fluidized bed burning coal” by Waqar Ali

Khan.

8) “Co-combustion of Coal & Biomass” by Khurram Shahzad

9) “Factors Influencing the Extraction Efficiency in a Pulse Sieve Plate extraction

column” by Shahzad Younus.

10) “Gasification of Coal & Biomass” by Mr. Sadiq Hussain

11) “Development of a Coaxial Composite Fiber” by Muhammad Ali Afzal

12) “Performance Criteria of Chemical Protective Clothing by Ms. Mehreen Ijaz

12.0 Books Published 1. “Quality Assurance in Higher Education, A Global Perspective” edited by Dr.

Abdul Raouf and Dr. Niaz Ahmad published by Higher Education Commission

2008.

2. “Quality in Higher Education: Challenges and Practices” Prof. Dr. Abdul Raouf,

Prof. Dr. Riaz Hussain Qureshi, and Prof. Dr. Niaz Ahmad. Published by Punjab

University, 2009

3. Higher Education Quality “Assurance and Assessment” published in 2011 Punjab

University Press, Edited by Dr. Abdul Raouf , Dr. Niaz Ahmad and Dr. Usman Awan.

4. “Emissions from Circulating Fluidized Bed” Lambert Academic Publishing,

Germany, ISBN: 978-3-659-48358-5 K.Shahzad, N.A. Akhtar

13.0 Funding Received

A. National Grants from Higher Education Commission

1. Punjab University Lahore:

Establishment of IQTM Rs. 40 Million

Strengthening of Academic Departments Rs.1000 Million

2. UET, Taxila

Water Resources & Petroleum and Gas Department Rs. 900 Million

B. International Grants from KOICA

NTRC $ 60 Million Dollar

C. HEC- British Council Grant for International Linkage £ 15000

(with a UK university)

D- Linkage with University of Sterling, Rs. 1.5 Million


7

UK through HEC

14.0 National/International Conferences Organized 1. International Conference on Assessing Quality in Higher Education, 2006

2. International Conference on Assessing Quality in Higher Education, 2008

3. International Conference on Assessing Quality in Higher Education at Punjab University

Lahore, 2010.

4. International Conference on Value Addition in Textile (COVITEX-2011) March, 2011 at

National Textile University, Faisalabad

5. International Conference on Value Addition in Textile (COVITEX-2013) March, 2013 at

National Textile University, Faisalabad

6. Chief Organizer 1st International Young Engineers Convention (FIYEC-2014) held on

April 18-20, 2014 at UET Lahore.

7. Re-Designing of Engineering Education in Pakistan Oct, 2015.

15.0 Conferences Participation

1. First National Conference on Chemical Engineering Congress, April, 2003.

2. Seminar on R & D Management in S. Korea from March 31 to April 3, 2003.

3. Seventh International Conference on Coal s Science, Canada.

4. Second International Conference on combustion technologies for a clean

environment, Lisbon, PORTUGAL.

5. First Int. conference on combustion and emissions control, Cardiff, U.K.

6. Int. Conf. on Fluid and Thermal Energy Conversion,'94, Bali, INDONESIA

7. Pacific International conference on Environmental Pollution Control of Combustion

processes, Maui, HI, USA.

8. First Int conf on the fuel and the environment, University of Peshawar, 1996.

9. 3-days workshop on Industrial Hazardous Waste Management in Punjab, EPA,

Punjab, 26-28, March, 1997.

10. International Seminar on Pollution Control in Chemical Process Industry, organized

by PIChE, Lahore, 1997.

11. International Conference on “Training and Management” organized by Ministry of

Labor and Social Affairs, State of Bahrain, 1999, 2001 and 2002.

12. International conference on Coal Science, Okinawa, Japan, 2005.

13. AMDISA Conference, Dhaka-Bangladesh, 2007

14. AMDISA Conference, Bhutan, 2009.

15. Vice Chancellors Training at Manchester U.K from December 07, 2009 to

December 17, 2009 nominated by Higher Education Commission of Pakistan.

16. ITMA – 2011 Textile Exhibition Barcelona-Spain.

17. World Congress on Engineering & Technology (WCET 2012), 1-3 June 2012,

Almaty, Kazakhstan.


8

18. Participation in International Conference on Engineering Education 2013 Madinah,

Kingdom of Saudi Arabia in December 2013.

Chief Editor of the Journal of Quality & Technology Management, Published by

University of the Punjab.

Chief Editor of the International Journal of Quality & Innovation, Published by Index

science (2005-2017)

Member Advisory Board, Journal of Quality Assurance in Education (Emerald Journal)

17.0 Member Board of Directors

2018 – to date Chairman Syndicate, University of the Punjab

2014 – 2018 Chairman Syndicate, UET, Taxila

2003,2009,2018- to

date

Member Senate, Punjab University, Lahore

2009 – 2014 Member Board of Governors, NTU

2008 – 2014 Member Board of Governors, PEC

2011 – 2014 Member Board of Governors, Air University Islamabad

2011 – 2013 Member Board of Governors, Textile Institute of Pakistan

2005-2007 Advisor Students, Punjab University, Lahore

2005-2009 Director, Quality Enhancement Cell, Punjab University, Lahore

2011 – 2013 Member Board of Directors, FESCO

2010 – 2014 Member Board of Directors Pak–Korean, Govt. Institute of Technology

2009 – 2017 Convener, Engineering Accreditation Board, PEC

2012 – 2015 Member Senate, Mirpur University of Science & Technology (MUST) Mirpur

2012 – 2015 Member Selection Board, Mirpur University of Science & Technology

(MUST) Mirpur

2016-2017 Member Board of Directors IESCO,

2017-2020 Member Syndicate GCWU, Sialkot

2016-to date Member Board of Governors, University of Wah

2015-to date Member Syndicate HITEC University Taxila

2015- 2017 Member Steering Committee for Establishment of KFUEIT, Rahim Yar Khan

2016-to date Member Senate NFC-IT, Multan

2016- to date Member Steering Committee on “Establishment of Technology Development

Fund for HEC Scholars returning after completion of PhD to introduce new

technologies in Pakistan”

2016 Member Board of Governors Hajvery University Lahore

2017 Member Board of Trustees Pakistan Science Foundation

16.0 Editor in Chief of Research Journals


9

18.0 International Linkages Developed

1. Institute of Retail Studies, University of Sterling, UK.

2. Northumbria University, New Castle upon Tyne, UK.

3. TUL, Czech Republic

4. Bolton University, UK

5. ENSISA, France

6. Wuhan Textile University, China

19.0 Research Publications

Research Articles 67

National and International Conferences 21

“NOX formation and destruction in a circulating fluidized bed combustor”. (1993),

in the proceedings of the 7th International Conference on Coal Science, Canada.

"Factors influencing the combustion efficiency of coal in a circulating fluidized bed

combustor" (1993) in the proceedings of the Second International Conference on

combustion technologies for a clean environment, Lisbon, PORTUGAL.

"Controlling SO2 emissions from a circulating fluidized bed combustor" (1993) in

the proceedings of the Seventh International conference on coal science, CANADA.

"Fate of NOX in a circulating fluidized bed combustor burning coal" (1993) in the

proceedings of the first international conference on combustion and emissions

control, Cardiff, U.K.

"Axial solids concentration in the riser of the Circulating fluidized bed" (1994) in

the Journal of Pakistan Institute of Chemical Engineers.

“NOX emissions control from a circulating fluidized bed combustor burning coal"

(1994) in the proceedings of the International Conference on Fluid and Thermal

Energy Conversion, '94, Bali, INDONESIA

"A mathematical model for the combustion of char in a circulating fluidized bed"

(1994) in the proceedings of the International Conference on Fluid and Thermal

Energy Convcrsion,'94, Bali, INDONESIA

“Experimental study on NOX and N2O emissions from a CFB combustor” (1994)

in the proceedings of Pacific International conference on Environmental Pollution

Control of Combustion processes, Maui, HI, USA.

"Preparation of Iron Free Aluminum Sulphate from Indigenous Bauxite through

Bayers Process" in the Journal of Pakistan Institute of Chemical Engineers, No. 1-2.

Vol. XXXIII, 1995, pp 95-99.

"Effects of operating parameters in removing fine particles in a TFC" in the Journal

of Pakistan Institute of Chemical Engineers, No. 1-2. Vol. XXIII, 1995, pp 15-22.

“Recovery of Barium from Indigenous Barites” in the Journal of Pakistan Institute

of Chemical Engineers, No. 1-2. Vol. XXIII, 1995, pp 109-111.

"Effect of number of partition with and without baffles in a TFC for fine

particulates" in the Journal of Pakistan Institute of Chemical Engineers, No. 1-2.

Vol. XXIII, 1995, pp 59-64.

"Factors influencing the absorption of Nitrogen Dioxide in packed bed" in the

Journal of Pakistan Institute of Chemical Engineers, Vol. XXIV, NO. 1-2, 1996, pp

115-121.


10

"The separation of submicron particles from gas stream using Turbulent Diffusion

Technique" in the Journal of Pakistan Institute of Chemical Engineers, Vol. XXIV

NO. 1-2, 1996, pp 67-72.

"Utilization of Turbulent Diffusion Technique for separation of submicron particles

from gas steams" in the Journal of Pakistan Institute of Chemical Engineers, No. 1-

2. Vol. XXIII, 1996, pp 95-100.

"Modeling Heat transfer in a circulating fluidized bed" in the Journal of Pakistan

Institute of Chemical Engineers, Vol. XXIV, NO. 1-2, 1996, pp 9-16.

"Effect of addition of Polyester Fiber on properties of the cement" in the Journal of

Pakistan Institute of Chemical Engineers, Vol. XXIV, NO. 1-2, 1996, pp 43- 46.

"The control of gaseous emissions in the coal burning fluidized beds, a review" in

the proceedings of the first international conference on the fuel and the

environment, University of Peshawar, July, 1996.

“Investigation of a turbulent flow contactor with hydraulic swirl spray pressure

nozzles in removing very fine particulates from gas stream” in the proceedings of

the first international conference on the fuel and the environment, University of

Peshawar, July, 1996.

"Controlling NOX and N2O emission from coal burning fluidized beds" in the

Journal of the Pakistan Institute of Chemical Engineers, Vol. XXV, 1997.

“Mathematical Modeling of a Pulsed Extraction Column” 2000, in the Journal of

Pakistan Institute of Chemical Engineers, Vol. XXVIII, 1-4, pp 29 – 36.

“Energy resources and their utilization in Pakistan” 2000, in the Journal of the

Pakistan Institute of Chemical Engineers, ” XXIX, 1-4, pp 31-38.

“Coal Combustion Modeling in a Circulating Fluidized Bed” 2000, in the Journal

of the Pakistan Institute of Chemical Engineers, ” XXIX, 1-4, pp 51-58.

“Factors influencing the extraction efficiency in a pulsed column” 2000, in the

Journal of the Pakistan Institute of Chemical Engineers,” XXIX, 1-4, pp 11-16.

“Experimental study on conversion of waste plastic into liquid fuel” 2001, in the

Journal of the Pakistan Institute of Chemical Engineers, ” XXX, 1-4, pp 10-18.

“Effect of Composition and Calorific Value of natural gas on efficiency of the

boiler.” 2001, in the Journal of the Pakistan Institute of Chemical Engineers, ”

XXX, 1-4, pp 21-31.

“Pollution level measurements of industrial effluents discharged into Deg Nullah”

2001, in the Journal of the Pakistan Institute of Chemical Engineers, ” XXX, 1-4,

pp 10-20.

“Production of Dimethyl Amine by continuous vapor phase methylation of Aniline

on Pilot Plant Scale” 2002, in the Journal of the Pakistan Institute of Chemical

Engineers, ” XXXI, 1-4, pp 9-16.

“Mass Transfer Characteristics of a sieve plate pulsed column” 2002, in the Journal

of the Pakistan Institute of Chemical Engineers, ” in the Journal of the Pakistan

Institute of Chemical Engineers, ” XXXI, 1-4, pp 51-58.

“Research & Development Management in Pakistan” in the Seminar on Research &

Development organized by KPC in South Korea from March 31 to April 03, 2003.

“Control of oxides of N and S from a coal fired CFB combustor: a review”, in the

Journal of PIChE, Vol-32, 2004.

The successful adaptation of quality management programs in Pakistan ISO

certified organization” in the Journal of QTM, Pakistan


11

“Role of Char in reducing NOx emissions during combustion of coal in fluidized

bed” In the International conference on Coal Science, Okinawa, Japan, 2005.

“Mathematical Model for CFB burning coal” In the International conference on

Coal Science, Okinawa, Japan, 2005.

“Design and operating experience of CFB burning coal” In the International

conference on Coal Science, Okinawa, Japan, 2005.

“The Successful Adaptation of Quality Management Programs in Pakistani ISO

Certified Organizations” in the Journal of Quality & Technology Management

Volume I, 2005

“Role of Top Management and Ethical Teaching in Quality Education at Higher

Educational Institutions” in the Journal of Quality & Technology Management,

Volume II, June, 2006.

“QA Model for universities: a case study of IQTM, University of the Punjab”, In

the International conference on Assessing Quality in Higher Education, Dec11-13,

2006, Lahore-Pakistan.

A Model base study of the supplier role assessment to quality improvement in

Cotton Spinning Industry Vol. 2 Issue 2, pp135-142, 2006 in the Journal of Quality

and Technology Management

“Effect of operating parameters on extraction in sieve plate pulsed extraction

column” in the Journal of Proceedings of the Pakistan Academy of Sciences” (44

(3) : 189-19503 September, 2007.

“Impacts of Multiple Blend Ratio & Different Spinning System on the Quality of

Jute Yarn” in the Journal of Quality & Technology Management, Volume III, Issue

II, December, 2007.

“Implementation of Quality Management Practices and Its Impact on Performance:

A study in Pakistan Cotton Spinning Industry” in the Journal of Quality &

Technology Management, Volume III, Issue II, December, 2007.

“Statistical Estimation of Main Quality Contributor in Yarn Manufacturing

Processes” in the Journal of Quality and Technology Management Vol. IV, Issue II,

December, 2008.

Impact of multiple blend ratios & different spinning system on the quality of jute

yarn: Journal of Quality & Technology Management: Volume 3, issue 2, 2008.

“Effect of Leadership and Academic culture on Implementation of self assessment

manual in Public Universities of Pakistan” in 10th South Asian Management Forum

Change and Continuity. Management Prospects & Challenges. 9-10 April, 2009.

“Quality Management Practices and their statistical interrelationships: A Case from

Pakistan Cotton Yarn Industry” in the Journal of Quality & Technology

Management, Volume V, Issue I, June, 2009.

“Development of service Quality Scale for Pharmaceutical Supply Chains” in

international journal of Pharmaceutical and Healthcare Marketing” Vol-3, No. 1,

2009.

“Investment in Quality Management practices and their impact on operational

performance in Cotton Spinning Industry, in the International Journal of Quality

Innovation Vol-2, Issue I, pp 37-52, 2009.

“Total Quality Management in Developing Countries - A case of pharmaceutical

wholesale distribution in Pakistan” International Journal of Pharmaceutical and

Healthcare Marketing Vol. 3 N0. 4, pp. 363-80, 2009.


12

“Nox formation during combustion process and in furnace control technologies” in

the Journal of the Pakistan Institute of Chemical Engineers, “XXXVII, pp 13-21,

2009.

“Hydrodynamics of Circulating Fluidized Bed Combustor” in the Journal of the

Pakistan Institute of Chemical Engineering, “XXXVII, 2009.

“Quality Characterization and Magnitude of Pollution Implication in textile Mills

Effluents” Journal of Quality and technology Management Vol. V, Pg. 27-40, Issue

11 December, 2009.

“Determination of the Organophosphours Pesticide in Vegetables by High

Performance Liquid Chromatography” in American-Eurasian Journal of

Agricultural and Environmental science, 6(5):513-519, 2009.

Hydrodynamics of Circulating Fluidized Bed Combustor: A Review, Journal of

PIChE, Volume 37, 2009, pp:81-88.

Emissions of NOx from Fast Fluidized Bed Combustor Burning Wheat Straw with

Coal, In the Proceedings of International Conference on Energy Systems Engineering

(NUST) , ICESE-2010, 25-27 October, 2010, Rawalpindi, Pakistan.

Radial Heat Transfer Investigations in a Circulating Fluidized Bed Burning Coal, In

the Proceedings of International Conference on Energy Systems Engineering (NUST) ,

ICESE-2010, 25-27 October, 2010, Rawalpindi, Pakistan.

“An Integrated Management Systems Approach to Corporate sustainability” in

European Business Review. Vol 23, 2011.

“Including sustainability in business excellence models” “Total Quality

Management and Business Excellence. Vol. 22, Issue 7, 2011.

Radial Heat Transfer Investigations in a Circulating Fluidized Bed Burning

Makarwal Coal, Journal f Faculty of Engineering & Technology, Vol. 18, No. 1,

2011, pp-59-70.

Emissions of NOx from Fast Fluidized Bed Combustor Burning Wheat Straw with

Coal, NUST Journal of Engineering Sciences, Vol. 4(1), 2011, pp.21-24.

Parametric Study of NOx Emissions in Circulating Fluidized Bed Combustor,

Journal of PIChE, Vol. 40(1), 2012, pp-61-68.

Axial Heat Transfer Investigations in a Circulating Fluidized Bed Combustor

Burning Makarwal Coal, Science International (Lahore), Vol. 24(4), 2012, pp-153-

157. (www.sci-int.com, ISSN # 1013-5316)

“Dispersed phase hold up in a Tall and Low Plate Free Area Liquid pulsed Sieve-

plate Extraction Column” in the Journal of “Separation Science and technology”

Manuscript No ID LSST-2011-5598.R1, 2013.

Burning of Pakistani Coal in a Circulating Fluidized Bed and Radial Heat Transfer

Investigations (Oral Presentation) UK-Pakistan Coal Conference (UKPKCC 2012),

3-5 July, 2012, University of Leeds, UK.

“A model for Total Quality Management in Higher Education in the Journal of

“Quality & Quantity 2013” Manuscript No QUQU-D-11-00183, 2013.

Imidacloprid residues in vegetables, soil and water in the southern Punjab, Pakistan.

Journal of Agricultural Technology-2012 Vol. 8(3): 903-916, 2013.

“Knowledge creation through Quality Management “in “Total Quality

Management and Business Excellence Journal, 2013.

A Model of Heat Transfer in a Circulating Fluidized Bed Combustor, Science

International (Lahore), Vol. 25 (4), 2013, pp-785-790. (www.sci-int.com, ISSN #

1013-5316).

http://www.sci-int.com/

http://www.sci-int.com/


13

Modelling and Analysis of SO2 Emissions under Fast Fluidized Bed Conditions

using One Dimensional Model, Advances in Chemical Engineering and Science,

Vol. 4, 2014, pp:327-338.

Parameters Effecting Thermal Conversion of Low Grade Coal and Biomass for

Gasification, Journal of Pakistan Institute of Chemical Engineers, Vol. 42(2), 2014.

Thermo chemical and Physical Characterization of Low-grade Coal and

Agricultural Residue as Feedstock for Co-gasification, 1st International Young

Engineers Convention (FEIIC IYEC-2014), April 18-20, 2014, University of

Engineering and Technology, Lahore, Pakistan.

Modeling and Analysis of So<sub>2</sub> Emission under fast fluidized Bed

Condition Using one Dimensional Model, Jan, 2014.

Investigations of Factors Affecting the Thermal Conversion and Kinetics of Low-

grade Coal and Bagasse using Thermogravimetric Technique, Journal of Faculty of

Engineering & Technology, Vol. 21(2), 2014, pp: 105-117.

Effect of Weave Structure on Themp-Physiological Properties of cotton Fabrics.

Autex Research Journal, November, 2014.

Production of rhamnolipid surfactant and its application

in bioscouring of cotton fabric- Carbohydrate Research” 391 (2014), 97-105

An Experimental Study of Emissions of NOx, SO2 and CO from Co-combustion of

Wheat Straw and Coal Under Fast Fluidized Bed Condition, Combustion Science

and Technology, Vol. 187, 2015, pp:1079-1092

Hydrodyanamic study of the Emissions of NOx, SO2 and CO from Co-combustion

of Wheat Straw and Coal Under Fast Fluidized Bed Condition, Combustion Science

and Technology, 2016.

Experimental study on dry torrefaction of Beech Wood and Miscanthus, Energies, Vol.

8, 2015, pp:3903-3923.

“Development of antibacterial cellulosic fabric via clean impregnation of silver

nanoparticles” in Journal of Cleaner Production 101 (2015) 377-386

“Lean Quality Improvement Model for Quality Practices in Software Industry in

Pakistan” in Journal of Software Evolution and Process, vol. 27, issue,4, April

2015. “Published online in Wiley online library (wileyonlinelibrary.com).

DOI: 10.1002/smr.1709”

Development of composite technical filament for smart application, the 13th Asian

Textile Conference , Geelong, Victoria, Australia, pp. 172-175,2015

Influence of spinneret parameter the development of composite polymeric technical

filaments, 15th AUTEX world Textile Conference, Bucharest, Romania, pp. 79,

2015.

Influence of spinneret parameter on the development of composite polymeric

technical filaments, 3rd International Conference on Value Addition and Innovation

in Textile-COVITEX 2015, Faisalabad, Pakistan pp. 119-123,2015.

“Penetration and Repellency of Chemical Protective Coveralls” 2016, in Pakistan

Journal of Science, 68(4), pp 413-418.

“Flame Resistance of Chemical Protective Clothing Materials At Various Washing

Intervals” 2016, in Technical Journal, 21(1), pp 99-19.

Evaluation of dimensional stability in cutting of coaxial composite filament, 16th

AUTEX world Textile Conference, 2016 Ljubljana, Slovenia.

Development of composite filament by conventional melt extruder, the fiber society

spring 2016 Conference Mulhouse, Finance.


14

“Abrasion Resistance Of Materials Used For Chemical Protective Clothing At

Various Washing Intervals” 2016, in Science International, 28(1), pp411-414

Emissions of NOx , SO2 and CO from co-combustion of Wheat Straw and Coal

Under Fast Fluidized Bed Condition,2015

Effect of Hydrodynamic Condition on Emission of NOx, SO2, and CO from Co-

Combustion of Wheat Straw and Coal Under Fast Fluidized Bed Condition, 2016

Response surface optimization in biosurfactant production by using a renewable

growth substrate. “Indian Journal of Biotechnology, Vol 15, April 2016, pp 217-229”

Development of Multifunctional Different Cross-sectional Shaped Coaxial

Composite Filaments’ for SMART Textile Applications” Textile Research Journal,

ONLINE 02 September, 87(16), 1991-2004.(2017)

Mass transfer efficiency of a tall and low plate free area liquid pulsed sieve-plate

extraction column. International journal of industrial chemistry, December 217,

vol.8, issue, 4 pp 397-410.

Performance Characterization of multifunctional different cross- sectional –shaped

coaxial composite- filaments for SMART textile, Journal of Industrial Textiles,

Feb, 2018.

Advances in Science & Technology, Research Journal, Vol.12, Issue I, March,

2018, Page 260-266

Production of rhamnolipid surfactant and its application in bioscouring of cotton

fabric, Carbohydrate Research, NTU, Faisalabad.

Documents

CONTENTS OF CURRICULUM VITAE