Embed Size (px)
Citation preview
TABLE OF CONTENTSPAGE
4 Type CF-2 Casing Heads
5 Type CF-9 Casing Heads
6 Type CF-1, CF-2 and CF-9 Casing Hangers
7 Type CF-2 BG Casing Spool
8 Double Pack-Off Flanges
9 Retrievable Wear Bushings
10 Secondary Seals
11-12 Tubing Heads
13 Single Completion Hanger
14 Tubing Hangers
15 Type CF-2 Tubing SpoolType CF-2 Tubing Hanger
16 Studded Adapters and Flanges
17 Forged Steel, Studded Tees and Crosses
18 Dual Manifold Crosses, Dual 5-Bolt
19 Tree Cap Assemblies
20 Back Pressure Valves & Control Plugs
21 Companion, Blind and Weld Neck Flanges
22 Stud Bolts, Nuts and Ring Gaskets
23 Adjustable Chokes
24-30 Christmas Trees
31 Terms and Conditions
4
Control Flow CF-2 is a straight-borecasing head that accepts any of twoheavy duty interchangeable hangers.Each of these hangers (CF-1 and CF-2) can support weight beyond the jointstrength of the pipe itself, with mini-mum casing deflection. Both can belowered through blowout preventers.The CF2’s straight bore prevents testplugs from wedging when pressure isapplied, reduces maintenance costs,
9 2000 7 2" Thrd in. 15 8 !!/16 6 #/8 8 #/4 195 lbs228.6 138 bar mm 381 220.7 161.9 222.3 88 kg
9 3000 7 2" Thrd in. 15 8 !!/16 6 #/8 8 #/4 195 lbs228.6 207 bar mm 381 220.7 161.9 222.3 88 kg
9 2000 7 %/8 2" Thrd in. 15 8 !!/16 6 #/8 8 #/4 210 lbs228.6 138 bar mm 381 220.7 161.9 222.3 95 kg
9 3000 7 %/8 2" Thrd in. 15 &/8 9 %/16 6 #/8 8 #/4 240 lbs228.6 207 bar mm 403.2 236.5 161.9 222.3 109 kg
9 2000 8 %/8 2" Thrd in. 13 &/8 8 (/16 8 8 #/4 180 lbs228.6 138 bar mm 352.4 217.5 203.2 222.3 82 kg
9 3000 8 %/8 2" Thrd in. 15 &/8 9 %/16 8 8 #/4 240 lbs228.6 207 bar mm 403.2 236.5 203.2 222.3 109 kg
9 5000 8 %/8 2" Thrd in. 15 &/8 9 %/16 8 8 #/4 250 lbs228.6 345 bar mm 403.2 236.5 203.2 222.3 113 kg
11 2000 8 %/8 2" Thrd in. 18 !/4 12 !/4 8 10 &/8 340 lbs279.4 138 bar mm 463.6 311.2 203.2 276.2 154 kg
11 3000 8 %/8 2" Thrd in. 20 12 !/4 8 10 &/8 460 lbs279.4 207 bar mm 508 311.2 203.2 276.2 209 kg
11 5000 8 %/8 2" Thrd in. 20 12 !/4 8 10 &/8
279.4 345 bar mm 508 311.2 203.2 276.211 2000 9 %/8 2" Thrd in. 18 !/4 12 !/4 9 10 &/8 320 lbs
279.4 138 bar mm 463.6 311.2 228.6 276.2 145 kg11 3000 9 %/8 2" Thrd in. 20 12 !/4 9 10 &/8 430 lbs
279.4 207 bar mm 508 311.2 228.6 276.2 196 kg11 5000 9 %/8 2" Thrd in. 20 12 !/4 9 10 &/8 680 lbs
279.4 345 bar mm 508 311.2 228.6 276.2 308 kg11 2000 10 #/4 2" Thrd in. 18 !/4 12 !/4 10 10 &/8 300 lbs
279.4 138 bar mm 463.6 311.2 254.0 276.2 136 kg11 3000 10 #/4 2" Thrd in. 20 12 !/4 10 10 &/8 410 lbs
279.4 207 bar mm 508 311.2 254.0 276.2 186 kg11 5000 10 #/4 2" Thrd in. 20 12 !/4 10 10 &/8 560 lbs
279.4 345 bar mm 508 311.2 254 276.2 254 kg13 %/8 2000 11 #/4 2" Thrd in. 18 !/4 12 !/4 10 10 &/8
346.1 138 bar mm 463.6 311.2 254 276.213 %/8 3000 11 #/4 2" Thrd in. 21 15 !/8 11 13 !/2
346.1 207 bar mm 533.4 384.2 279.4 342.913 %/8 2000 11 #/4 2" Thrd in. 18 !/4 12 !/4 12 !/2 13 !/2 380 lbs346.1 138 bar mm 463.6 311.2 317.5 342.9 172 kg13 %/8 3000 11 #/4 2" Thrd in. 19 12 #/4 12 !/2 13 !/2 500 lbs346.1 207 bar mm 482.6 323.9 317.5 342.9 227kg13 %/8 5000 10 #/4 2" Thrd in. 22 12 !/4 12 !/2 13 !/2
346.1 345 bar mm 558.8 311.2 317.5 342.916 #/4 2000 16 2" Thrd in. 18 !/8 10 %/8 15 !/4 16 %/8 980 lbs425.5 138 bar mm 460.4 269.9 387.4 422.3 445 kg16 #/4 3000 16 2" Thrd in. 18 !/8 10 %/8 15 !/4 16 %/8 995 lbs425.5 207 bar mm 460.4 269.9 387.4 422.3 451 kg16 #/4 5000 16 2" Thrd in. 18 !/8 10 %/8 15 !/4 16 %/8
425.5 345 bar mm 460.4 269.9 387.4 422.321 !/4 2000 20 2" Thrd in. 19 #/16 20 !/8
539.8 138 bar mm 487.4 511.220 #/4 3000 20 2" Thrd in. 21 #/4 13 %/16
527.1 207 bar mm 552.5 338.1*Available with Flanged Outlet
Size W.P. Outlet* A B C DApprox.Weight
DimensionsBottomThreaded
TOP FLANGE
TYPE CF-2 CASING HEADS
avoids damage to sealing area by drillbits, and permits hanging more casingweight. These casing heads are usuallyfurnished with two 2-inch outlets, butlarger outlets plus studded or flanged,can be provided if desired. Bottoms ofcasing heads can be male, female, orslip-on type for welding. Top flanges are
available in working pressures up to10,000 psi. All casing head spools willaccept bit guides and secondary sealsif desired. When using bowl protector inCF-2 casing heads, we use 2 lockscrews in upper flange (CF-2BP) or ahold down flange with lock screws canbe furnished.
B
A
DC
B
A
DC
5
The CF-9 and CF-9L Head can be pro-vided with an internal Slip-On Weld withInner “Seal” Ring Bottom.
Size W.P. Outlet* A B C DApprox.Weight
DimensionsBottomThreaded
TOP FLANGE
11 2000 8 %/8 2 L.P. in. 18 !/4 12 !/4 8 10 &/8 380 lbs279.4 138 bar mm 463.6 311.2 203.2 276.2 172 kg
11 3000 8 %/8 2 L.P. in. 20 12 !/4 8 10 &/8 565 lbs279.4 207 bar mm 508 311.2 203.2 276.2 256 kg
11 5000 8 %/8 2 L.P. in. 20 12 !/4 8 10 &/8 780 lbs279.4 345 bar mm 508 311.2 203.2 276.2 354 kg
11 2000 9 %/8 2 L.P. in. 18 !/4 12 !/4 9 10 &/8 360 lbs279.4 138 bar mm 463.6 311.2 228.6 276.2 164 kg
11 3000 9 %/8 2 L.P. in. 20 12 !/4 9 10 &/8 545 lbs279.4 207 bar mm 508 311.2 228.6 276.2 247 kg
11 5000 9 %/8 2 L.P. in. 20 12 !/4 10 10 &/8 760 lbs279.4 345 bar mm 508 311.2 254.0 276.2 345 kg
11 2000 10 #/4 2 L.P. in. 18 !/4 12 !/4 10 10 &/8 355 lbs279.4 138 bar mm 463.6 311.2 254.0 276.2 161 kg
11 3000 10 #/4 2 L.P. in. 20 12 !/4 10 10 &/8 520 lbs279.4 207 bar mm 508 311.2 254 276.2 236 kg
11 5000 10 #/4 2 L.P. in. 20 12 !/4 10 10 &/8 745 lbs279.4 345 bar mm 508 311.2 254 276.2 338 kg13 %/8 2000 11 #/4 2 L.P. in. 18 !/4 12 !/4 10 10 &/8 490 lbs346.1 138 bar mm 463.6 311.2 254 276.2 222 kg13 %/8 3000 11 #/4 2 L.P. in. 21 15 !/8 11 13 !/2 800 lbs346.1 207 bar mm 533.4 384.2 279.4 342.9 363 kg13 %/8 2000 13 #/8 2 L.P. in. 18 !/4 12 !/4 12 !/2 13 !/2 455 lbs346.1 138 bar mm 463.6 311.2 317.5 342.9 206 kg13 %/8 3000 13 #/8 2 L.P. in. 19 12 #/4 12 !/2 13 !/2 765 lbs346.1 207 bar mm 482.6 323.9 317.5 342.9 347 kg13 %/8 5000 13 #/8 2 L.P. in. 22 12 !/4 12 !/2 13 !/2 1500 lbs346.1 345 bar mm 558.8 311.2 317.5 342.9 680 kg
16 3000 16 2 L.P. in. 17 #/4 11 #/4 15 #/8 16 %/8
mm 450.9 298.5 390.5 422.320 3000 20 2 L.P. in. 21!/4 14 19 (/16 20 !/8
mm 539.8 355.6 487.4 511.2*Available with Flanged Outlet
Specifications: CF-9 Casing Heads
TYPE CF-9 AND CF-9L CASING HEADS
B
A
DC
6
TYPE CF-1, CF-2 & CF-9 CASING HANGERS
The CF-2 casing hanger combines packoff, slip bowl, andslips into a single unit. The packoff automatically seals thecasing annulus below the slips when casing load is applied,thus allowing annulus packoff before removing blowoutpreventer and cutting casing.
This wraparound hanger is easy to install. Simple construc-tion and few parts make the CF-2 easy and economical torepair, and the individual tapered slip bowl reduces casinghead repairs.
The CF-1 casing hanger consists of slips, slip bowl,and a floating seal ring (type H packoff). Slips andslip bowl can easily be wrapped around the casing.The seal ring slips over the casing and into thecasing head after casing has been suspended andcut off, providing a positive annulus packoff.
L
D
B
AC
L
D
L
Control Flow Casing Hangers—Dimension Data
D L - Height L - Height L - HeightSize Max O.D. CF-9 CF-2 CF-1 A B C
in.(mm) in.(mm) in.(mm) in.(mm) in.(mm) in.(mm) in.(mm) in.(mm)
9" x 4!/2"(229x114) 8!!/16"(221) 8&/8"(225.4) 8!/16"(204.8) 5!/8"(130) 9!/2"(241) 2#/32"(53) 4%/8"(117)9" x 5!/2"(229x140) 8!!/16"(221) 8&/8"(225.4) 8!/16"(204.8) 5!/8"(130) 9!/2"(241) 2#/32"(53) 5%/8"(143)
11" x 4!/2"(279x114) 10!#/1 6"(275) 8&/8"(225.4) 8!/16"(204.8) 4!#/32"(112) 11%/8"(295) 2!/16"(52) 4(/16"(116)
11" x 5!/2"(279x140) 10!#/1 6"(275) 8&/8"(225.4) 8!/16"(204.8) 4&/1 6"(113) 11%/8"(295) 2!/16"(52) 5(/16"(141)
11" x 7"(279x178) 10!#/1 6"(275) 8&/8"(225.4) 8!/16"(204.8) 4&/1 6"(113) 11%/8"(295) 2!/16"(52) 7!/16"(179)
11" x 7%/8"(279x194) 10!#/1 6"(275) 8&/8"(225.4) 8!/16"(204.8) 4!#/1 6"(122) 11%/8"(295) 2!/16"(52) 7!!/16"(195)
11" x 8%/8"(279x219) 10!#/1 6"(275) 8&/8"(225.4) 8!/16"(204.8) 4!#/1 6"(122) 11%/8"(295) 2!/16"(52) 7!!/16"(195)
13%/8" x 7%/8"(346x194) 13&/16"(341) 8&/8"(225.4) 8!/16"(204.8) 4#/16"(106) 14"(356) 2#/32"(53) 7@#/32"(196)
13%/8" x 8%/8"(346x219) 13&/16"(341) 8&/8"(225.4) 8!/16"(204.8) 4#/16"(106) 14"(356) 2#/32"(53) 8@#/32"(221)
13%/8" x 9%/8"(346x244) 13&/16"(341) 8&/8"(225.4) 8!/16"(204.8) 4#/16"(106) 14"(356) 2#/32"(53) 9@#/32"(247)
13%/8" x 10#/4"(346x273) 13&/16"(341) 8&/8"(225.4) 8!/16"(204.8) 4#/16"(106) 14"(356) 2#/32"(53) 10&/8"(276)
16#/4" x 8%/8"(425x219) 16(/16"(421) 10#/8"(263.5) 9"(228.6) 5!!/16"(144) 17%/16"(440) 2#/8"(60) 8@#/32"(221)
16#/4" x 9%/8"(425x244) 16(/16"(421) 10#/8"(263.5) 9"(228.6) 5!!/16"(144) 17%/16"(440) 2#/8"(60) 9@#/32"(247)
16#/4" x 10#/4"(425x273) 16(/16"(421) 10#/8"(263.5) 9"(228.6) 5!!/16"(144) 17%/16"(440) 2#/8"(60) 10&/8"(276)
16#/4" x 11#/4"(425x298) 16(/16"(421) 10#/8"(263.5) 9"(228.6) 5!#/1 6"(148) 17%/16"(440) 2#/8"(60) 11&/8"(302)
20#/4" x 10#/4"(527x273) 20!/16"(510) 10" (254) 9"(228.6) 5!!/16"(144) 21"(535) 2!!/16"(68) 10&/8"(276)
" 20#/4" x 13#/8"(527x340) 20!/16"(510) 10" (254) 9"(228.6) 5!!/16"(144) 21"(535) 2!!/16"(68) 13!/2"(343)
20#/4" x 16"(527x406) 20!/16"(510) 9#/8"(238.1) 9"(228.6) 5!!/16"(144) 21"(535) 2!!/16"(68) 16!/8"(410)
All dimensions in inches(mm)
7
Size W.P. Size W.P. Outlet A B C DApprox.Weight
DimensionsCasingSize
TOP FLANGE
11 2000 11 2000 10 #/4 2 L.P.O. in. 17 #/4 8 #/4 10 10 &/8 520 lbs279.4 138 bar 279.4 138 bar mm 450.9 222.3 254 276.2 236 kg
11 2000 13 %/8 2000 10 #/4 2 L.P.O. in. 17 #/4 8 #/4 10 10 &/8 680 lbs279.4 138 bar 346.1 138 bar mm 450.9 222.3 254 276.2 308 kg
11 3000 11 3000 10 #/4 2 L.P.O. in. 17 #/4 8 #/4 8 10 &/8 710 lbs279.4 207 bar 279.4 207 bar mm 450.9 222.3 203.2 276.2 322 kg
11 3000 11 3000 10 #/4 2-5000 in. 17 #/4 8 #/4 8 10 &/8 710 lbs279.4 207 bar 279.4 207 bar mm 450.9 222.3 203.2 276.2 322 kg
11 3000 13 %/8 2000 10 #/4 2 L.P.O. in. 17 #/4 8 #/4 10 10 &/8 680 lbs279.4 207 bar 346.1 138 bar mm 450.9 222.3 254 276.2 308 kg
11 3000 13 %/8 2000 10 #/4 2-5000 in. 17 #/4 8 #/4 10 10 &/8 680 lbs279.4 207 bar 346.1 138 bar mm 450.9 222.3 254 276.2 308 kg
11 3000 13 %/8 3000 10 #/4 2 L.P.O. in. 17 #/4 8 #/4 10 10 &/8 710 lbs279.4 207 bar 346.1 207 bar mm 450.9 222.3 254 276.2 322 kg
11 3000 13 %/8 3000 10 #/4 2-5000 in. 17 #/4 8 #/4 10 10 &/8 710 lbs279.4 207 bar 346.1 207 bar mm 450.9 222.3 254 276.2 322 kg
11 3000 16 #/4 2000 10 #/4 2 L.P.O. in. 17 !/4 8 &/8 10 10 &/8 846 lbs279.4 207 bar 425.5 138 bar mm 438.2 225.4 254 276.2 384 kg
11 3000 16 #/4 2000 10 #/4 2-5000 in. 17 !/4 8 &/8 10 10 &/8 846 lbs279.4 207 bar 425.5 138 bar mm 438.2 225.4 254 276.2 384 kg
11 3000 16 #/4 3000 10 #/4 2 L.P.O. in. 17 &/8 8 &/8 10 10 &/8 1080 lbs279.4 207 bar 425.5 207 bar mm 454 225.4 254 276.2 490 kg
11 3000 16 #/4 3000 10 #/4 2-5000 in. 17 &/8 8 &/8 10 10 &/8 1080 lbs279.4 207 bar 425.5 207 bar mm 454 225.4 254 276.2 490 kg
11 5000 13 %/8 3000 10 #/4 2 L.P.O. in. 22 12 !/2 10 10 &/8 1100 lbs279.4 345 bar 346.1 207 bar mm 558.8 317.5 254 276.2 499 kg
11 5000 13 %/8 3000 10 #/4 2-5000 in. 22 12 !/2 10 10 &/8 1100 lbs279.4 345 bar 346.1 207 bar mm 558.8 317.5 254 276.2 499 kg
11 5000 13 %/8 5000 10 #/4 2 L.P.O. in. 24 #/4 12 !/2 10 10 &/8 1254 lbs279.4 345 bar 346.1 345 bar mm 317.5 254 276.2 569 kg
11 5000 13 %/8 5000 10 #/4 2-5000 in. 24 #/4 12 !/2 10 10 &/8 1254 lbs279.4 345 bar 346.1 345 bar mm 317.5 254 276.2 569 kg
11 5000 16 3/4 3000 10 #/4 2 L.P.O. in. 22 &/8 12 !/2 10 10 &/8 1254 lbs279.4 345 bar 425.5 207 bar mm 581 317.5 254 276.2 569 kg
11 5000 16 #/4 3000 10 #/4 2-5000 in. 22 &/8 12 !/2 10 10 &/8 1254 lbs279.4 345 bar 425.5 207 bar mm 581 317.5 254 276.2 569 kg
11 10000 13 %/8 5000 9 %/8 1 !#/16-10000 in. 28 !%/16 14 !!/16 9 10 &/8 1254 lbs279.4 690 bar 346.1 345 bar mm 735 373.1 228.6 276.2 569 kg13 %/8 3000 16 #/4 3000 10 #/4 2 L.P.O. in. 24 !/2 13 !/2 10 10 &/8 1452 lbs346.1 207 bar 425.5 207 bar mm 622.3 342.9 254 276.2 659 kg13 %/8 3000 16 #/4 3000 10 #/4 2-5000 in. 24 !/2 13 !/2 10 10 &/8 1452 lbs346.1 207 bar 425.5 207 bar mm 622.3 342.9 254 276.2 659 kg13 %/8 3000 21 !/4 2000 13 #/8 2 L.P.O. in. 26 #/4 14 #/8 12 !/2 13 !/2 2063 lbs346.1 207 bar 539.8 138 bar mm 679.5 365.1 317.5 342.9 936 kg13 %/8 3000 21 !/4 2000 13 #/8 2-5000 in. 26 #/4 14 #/8 12 !/2 13 !/2 2063 lbs346.1 207 bar 539.8 138 bar mm 679.5 365.1 317.5 342.9 936 kg13 %/8 5000 20 #/4 3000 13 #/8 2 L.P.O. in. 24 !/2 12 !/4 12 !/2 13 !/2 2450 lbs346.1 345 bar 527.1 207 bar mm 622.3 311.2 317.5 342.9 1111 kg
BOTTOM FLANGE
TYPE CF-2 BG CASING SPOOL
A
C
B
DCD
Type CF-2 BG Casing Spool
8
DOUBLE PACK-OFF FLANGES
Double Pack-Off Flanges
Flange Size and Working Pressure Casing Size Height21!/4" 2000 13#/8" 339.7mm 4%/16" 109.5mm
11" 3000 5!/2" 139.7mm 4!/16" 103.2mm
11" 3000 7" 177.8mm 4!/16" 103.2mm
11" 3000 7%/8" 193.7mm 4!/16" 103.2mm
13%/8" 3000 7" 177.8mm 4#/4" 120.7mm
13%/8" 3000 9%/8" 244.4mm 4#/4" 120.7mm
13%/8" 3000 x 11" 5000* 7" 177.8mm 4&/8" 123.8mm
13%/8" 3000 x 11" 5000* 7%/8" 193.7mm 4&/8" 123.8mm
13%/8" 3000 x 11" 5000* 9%/8" 244.4mm 4&/8" 123.8mm
20#/4" 3000 13#/8" 339.7mm 4#/4" 120.7mm
20#/4" 3000 x 13%/8" 5000* 13#/8" 339.7mm 5%/16" 134.9mm
11" 5000 5!/2" 139.7mm 4!!/16" 119.1mm
11" 5000 7" 177.8mm 4!!/16" 119.1mm
11" 5000 7%/8" 193.7mm 4!!/16" 119.1mm
11" 5000 x 11" 10,000* 5!/2" 139.7mm 5(/16" 141.3mm
11" 5000 x 11" 10,000* 7" 177.8mm 5(/16" 141.3mm
11" 5000 x 11" 10,000* 7%/8" 193.7mm 5(/16" 141.3mm
11" 5000 x 7!/16" 15,000* 5!/2" 139.7mm 5" 127.0mm
13%/8" 5000 9%/8" 244.4mm 5!/2" 139.7mm
13%/8" 5000 x 11" 10,000* 7" 177.8mm 6!/8" 155.6mm
13%/8" 5000 x 11" 10,000* 7%/8" 193.7mm 6!/8" 155.6mm
13%/8" 5000 X 11" 10,000* 9%/8" 244.4mm 6!/8" 155.6mm
11" 10,000 5!/2" 139.7mm 6#/16" 157.2mm
11" 10,000 7" 177.8mm 1#/16" 30.2mm
11" 10,000 7%/8" 193.7mm 6#/16" 157.2mm
11" 10,000 X 7!/16" 15,000* 5!/2" 139.7mm 6" 152.4mm
*Double-studded adapter flanges
DOUBLE PACK-OFF FLANGESThe double pack-off flange provides anauxiliary casing seal and a means for pres-sure testing the casing seal and the primaryannulus seal below the flange.
The double pack-off flange also serves as anintermediate crossover flange when a re-stricted area ring gasket is used in the smallerdiameter top groove. When a crossover isused, the top connection can be exposed to ahigher pressure than the original rated work-ing pressure.
The double pack-off flange has two moldedelastomer P seals which are energized byplastic packing. Pressure applied to the uppertest port tests the P seals. Pressure applied tothe lower test port tests the gasket and theprimary casing seal.
9
RETRIEVABLE WEAR BUSHINGS
11" Nominal 13%/8" NominalCF Housing or CF Housing or
Combination Testing, Running, Spool 2000 - Spool 2000Locking Flange and Retrieving Tool 10,000 psi WP 10,000 psi WP
Flange Size and Nominal Size Type Spool ThreadWorking Pressure and Working Pressure or Housing Size Bore Size Bore Size
7!/16" 5000 7!/16" 2000-5000 CFM, CFC 2&/8" EUE 9.938" 12.500"
11" 2000 7!/16 2000-5000 CM, CFC 3!/2" IF 9.875" 12.313"
11" 3000 7!/16" 2000-10,000 CFM, CFC 2&/8" IF 9.688" 12.063"
11" 5000 11" 2000-10,000 CF-2, CF-9 4!/2" IF 9.563" 11.000"
11" 10,000 13%/8" 2000-10,000 CF-2, CF-9 4!/2" 9.313" 10.688"
13%/8" 3000 16#/4" 2000-10,000 CF-2, CF-9 4!/2" 8.921" 9.938"
11" 10,000 x 11" 5000 18#/4" 2000-3000 CF-2, CF-9 5!/2" FH 8.875" 9.688"
13%/8" 5000 21!/4" 2000-3000 CF-2, CF-9 5!/2" FH 8.688" 9.313
16#/4" 2000x16#/4" 2000 8.563" 8.835"
13%/8" 3000 x 13%/8" 3000 8.335" 8.688"
13%/8" 3000 x 11" 5000 7.938" 8.563"
13%/8" 5000 x 13%/8" 5000 7.829"
21!/4" 2000 x 21!/4" 2000 7.688"
20#/4" 3000 x 20#/4" 3000 7.428"
21!/4" 2000 x 16#/4" 2000 6.813"
21!/4" 2000 x 16#/4 3000 6.313"
6.093
A nominal 10" test plug converted with a sleeve bushingto test a 12" nominal bowl casing head. Test plug must berun with pin connection down.
A nominal 10" test plug and bowl protector running toolconverted to run and retrieve a 12" nominal bowl protec-tor. When run as a running and retrieving tool, the pinconnection must be up.
10
Bottom Flange Casing Range9" 5000 3!/2"—5!/2"11" 5000 3!/2"—7%/8"13%/8" 5000 4!/2"—9%/8"16#/4" 5000 9%/8"—11#/4"21!/4" 5000 11#/4"—16"
Bottom Flange Casing Range9" 2000 4"—5!/2"11" 2000 4"—7%/8"13%/8" 2000 4!/2"—10#/4"16" 2000 8%/8"—13#/8"21!/4" 2000 11#/4—16"9" 3000 4"—5!/2"11" 3000 4"—7%/8"13%/8" 3000 4!/2"—10#/4"16" 3000 8%/8 "—13#/8"21!/4" 3000 11#/4"—16"
Type CF-P Secondary Seal
Bottom Flange Casing Range11" 10,000 3!/2" —7%/8"13%/8" 10,000 4!/2"—10#/4"16#/4" 10,000 8%/8 "—13#/8"21!/4" 10,000 11#/4"—16"11" 15,000 3!/2"—7%/8"13%/8" 15,000 4!/2"—10#/4"16#/4" 15,000 8%/8"—13#/8"21!/4" 15,000 11#/4"—16"
Type CF-X Bottom Prep.
Type CF-R Bushing
SECONDARY SEALS
11
The Control Flow, Type CF-T-16 Tubing Head is a full-opening, threaded bore head. It’s available with API topand bottom flanges, or with threaded or slip-on typebottom for welding. Outlets normally are two , 2 inchscrewed or studded flanges, Large outlets or extendedflanged outlets are available on request. All studdedoutlets have VR (Valve removal) threads to accept valveremoval plugs. This feature allows you to replace full-opening valves under pressure.
All Control Flow, hangers for CF-T-16 can be installedthrough full opening Blow-out Preventers.
The Control Flow, Type CF-T-16 Tubing provides lockdownscrews sufficient to hold down all styles of Tubing Hang-ers and provides additional compression on the annuluspacking flanged bottom available on CF-T-16.
Flanged bottoms available on CF-T-16, CF-00 SecondarySeals, CF-PE, CF-PR and Plain Bottoms. All flangeshave test ports with ball checks for testing the secondaryand primary seal of the Casing Head below. Standardbottom size for the CF-16 pack -off or CF-16-00 reducerbushing is used. This feature provides additional inter-changeability and flexibility, permitting you to change thebit guide or bushing instead of the Tubing Head.
TUBING HEADSTYPE CF T-16
in. mm mm Bar in. mm in. mm in. mm in. mm lbs kg4 !/2 114.3 7 !/16-2000 179.4 138 12 #/4 323.9 7 #/4 196.9 7 177.8 4 101.6 172 785 !/2 139.7 7 !/16-2000 179.4 138 12 #/4 323.9 7 #/4 196.9 7 177.8 5 127.0 161 737 177.8 7 !/16-2000 179.4 138 12 #/4 323.9 7 #/4 196.9 7 177.8 6 #/8 161.9 142 65
4 !/2 114.3 7 !/16-3000 179.4 207 12 #/4 323.9 7 #/4 196.9 7 177.8 4 101.6 223 1015 !/2 139.7 7 !/16-3000 179.4 207 12 #/4 323.9 7 #/4 196.9 7 177.8 5 127.0 212 967 177.8 7 !/16-3000 179.4 207 12 #/4 323.9 7 #/4 196.9 7 177.8 6 #/8 161.9 183 83
BOTTOMCONNECTION
8RD METRIC
TOP FLANGE
in.-psi
A B C D WEIGHT
mm Bar mm Bar in. mm in. mm in. mm in. mm lbs kg9-2000 228.6 138 7 !/16-2000 179.4 138 14 355.6 7 !/4 184.2 7 177.8 6 #/8 161.9 310 140.69-2000 228.6 138 7 !/16-3000 179.4 207 14 %/16 363.5 7 !/4 184.2 7 177.8 6 #/8 161.9 320 145.19-2000 228.6 207 7 !/16-3000 179.4 207 15 %/16 388.9 7 !/4 184.2 7 177.8 6 #/8 161.9 395 179.29-2000 279.4 138 7 !/16-2000 179.4 138 13 #/4 349.3 6 !!/16 169.9 7 177.8 6 #/8 161.9 360 163.39-2000 279.4 138 7 !/16-3000 179.4 207 14 !/16 357.2 6 !!/16 169.9 7 177.8 6 #/8 161.9 415 188.29-2000 279.4 207 7 !/16-3000 179.4 207 15 !/2 393.7 6 #/4 171.5 7 177.8 6 #/8 161.9 455 206.4
BOTTOM CONNECTION 8RD
METRIC
TOP FLANGE
in.-psi
A B C D WEIGHTMETRICin.-psi
A
C
B
D
A
C
B
D
12
9" 2000 7!/16" 2000 7" BL 2" L.P.O. 19"(482.6) 10%/8"(269.9) 6!#/16"(173.0) 7"(177.8) 355 1609" 2000 7!/16" 2000 7" BL 2" 2,000 19"(482.6) 10%/8"(269.9) 6!#/16"(173.0) 7"(177.8) 360 1639" 2000 7!/16" 3000 7" BL 2" L.P.O. 20"(508) 9!/2"(241.3) 6#/8"(161.9) 7"(177.8) 400 1819" 2000 7!/16" 3000 7" BL 2" 5,000 20"(508) 9!/2"(241.3) 6#/8"(161.9) 7"(177.8) 410 1859" 3000 7!/16" 3000 7" BL 2" L.P.O. 21!/4"(539.8) 10!/4"(260.4) 6#/8"(161.9) 7"(177.8) 505 2299" 3000 7!/16" 3000 7" BL 2" 5,000 21!/4"(539.8) 10!/4"(260.4) 6#/8"(161.9) 7"(177.8) 510 2319" 3000 7!/16" 5000 7" BL 2" 5,000 21!/4"(539.8) 11#/4"(298.5) 6#/8"(161.9) 7"(177.8) 665 302
11" 2000 7!/16" 2000 9" BL 2" L.P.O. 19"(482.6) 10(/16"(268.3) 6!#/16"(173.0) 7"(177.8) 440 20011" 2000 7!/16" 2000 9" BL 2" 2,000 19"(482.6) 10(/16"(268.3) 6!#/16"(173.0) 7"(177.8) 440 20011" 2000 7!/16" 3000 9" BL 2" L.P.O. 21#/4"(552.5) 10"(254.0) 6#/8"(161.9) 7"(177.8) 555 25211" 2000 7!/16" 3000 9" BL 2" 5,000 21#/4"(552.5) 10"(254.0) 6#/8"(161.9) 7"(177.8) 560 30611" 3000 7!/16" 3000 9" BL 2" L.P.O. 21#/4"(552.5) 10"(254.0) 6#/8"(161.9) 7"(177.8) 600 27211" 3000 7!/16" 3000 9" BL 2" 5,000 21"(533.4) 15!/8"(384.2) 6!#/16"(173.0) 7"(177.8) 600 27211" 3000 7!/16" 5000 9" BL 2" 5,000 22&/16"(569.9) 11#/4"(298.5) 6!#/16"(173.0) 7"(177.8) 675 30611" 5000 7!/16" 5000 9" BL 2" 5,000 24!/2"(622.3) 11!/8"(282.6) 6!#/16"(173.0) 7"(177.8) 880 39911" 5000 7!/16" 10000 9" BL 1!/16" 10,000 26!/2"(673.1) 14%/8"(371.5) 6!#/16"(173.0) 7"(177.8) 856 38811" 10000 7!/16" 10000 9" BL 1!/16" 10,000 26!/2"(673.1) 12#/4"(323.9) 6#/4"(171.5) 7"(177.8) 1320 59811" 10000 7!/16" 15000 9" BL 1!/16" 10,000 26!/2"(673.1) 12!#/16"(325.4) 6#/8"(161.9) 7"(177.8) 1385 62811" 3000 9" 3000 9" BL 2" 5,000 22#/8"(568.3) 11#/4"(298.5) 6!#/16"(173.0) 7"(177.8) 760 34411" 3000 9" 5000 9" BL 2" 5,000 23!/4"(590.6) 11%/8"(295.3) 8!/4"(209.6) 8#/4"(222.3) 810 36711" 5000 9" 10000 9" BL 1!/16" 10,000 24#/8"(619.1) 13#/4"(349.3) 8!/4"(209.6) 8#/4"(222.3) 1249 56711" 10000 9" 10000 9" BL 1!/16" 10,000 28"(711.2) 14"(355.6) 7"(177.8) 8#/4"(222.3) 1708 771
13%/8" 2000 7!/16" 2000 9" BL 2" L.P.O. 20&/8"(530.2) 10"(254.0) 6!#/16"(173.0) 7"(177.8) 490 22213%/8" 2000 7!/16" 2000 9" BL 2" 2,000 20&/8"(530.2) 10"(254.0) 6!#/16"(173.0) 7"(177.8) 495 22513%/8" 2000 7!/16" 3000 9" BL 2" L.P.O. 20"(508.0) 9!/2"(241.3) 6#/8"(161.9) 7"(177.8) 625 28413%/8" 2000 7!/16" 3000 9" BL 2" 5,000 20"(508.0) 9!/2"(241.3) 6#/8"(161.9) 7"(177.8) 630 29513%/8" 3000 7!/16" 3000 9" BL 2" L.P.O. 24!/2"(622.3) 11!/2"(292.1) 6!#/16"(173.0) 7"(177.8) 675 30613%/8" 3000 7!/16" 3000 9" BL 2" 5,000 24!/2"(622.3) 11#/4"(298.5) 6!#/16"(173.0) 7"(177.8) 670 30413%/8" 3000 7!/16" 5000 9" BL 2" L.P.O. 24!/2"(622.3) 11#/4"(298.5) 6!#/16"(173.0) 7"(177.8) 805 36313%/8" 3000 7!/16" 5000 9" BL 2" 5,000 24!/2"(622.3) 11#/4"(298.5) 6!#/16"(173.0) 7"(177.8) 810 36713%/8" 2000 9" 2000 10#/4" BL 2" L.P.O. 24!/4"(615.9) 10#/8"(263.5) 8!/4"(209.6) 8#/4"(222.3) 500 22713%/8" 2000 9" 2000 10#/4" BL 2" 2,000 22!/8"(561.9) 10#/8"(263.5) 8!/4"(209.6) 8#/4"(222.3) 505 22913%/8" 2000 9" 3000 10#/4" BL 2" L.P.O. 20!/8"(511.2) 9%/8"(244.5) 8!/4"(209.6) 8#/4"(222.3) 650 29513%/8" 2000 9" 3000 10#/4" BL 2" 5,000 20!/8"(511.2) 9%/8"(244.5) 8!/4"(209.6) 8#/4"(222.3) 655 29713%/8" 3000 9" 3000 10#/4" BL 2" L.P.O. 22#/4"(577.9) 10(/16"(268.3) 8!/4"(209.6) 8#/4"(222.3) 700 31813%/8" 3000 9" 3000 10#/4" BL 2" 5,000 22#/4"(577.9) 10(/16"(268.3) 8!/4"(209.6) 8#/4"(222.3) 705 32013%/8" 3000 9" 5000 10#/4" BL 2" L.P.O. 23%/8"(600.1) 11%/8"(295.3) 8!/4"(209.6) 8#/4"(222.3) 710 32213%/8" 3000 9" 5000 10#/4" BL 2" 5,000 23%/8"(600.1) 11%/8"(295.3) 8!/4"(209.6) 8#/4"(222.3) 720 32513%/8" 3000 11" 5000 10#/4" BL 2" 5,000 22"(558.8) 12!/2"(317.5) 10"(254.0) 10&/8"(276.2) 840 38013%/8" 5000 11" 10000 9%/8" BL 1!/16" 10000 29"(736.6) 14!!/16"(376.1) 9"(228.6) 10&/8"(276.2) 1750 79613%/8" 5000 11" 10000 9%/8" OO 1!/16" 10000 29"(736.6) 14!!/16"(376.1) 9"(228.6) 10&/8"(276.2) 1750 796
TUBING HEADSTYPE CFC, CFM and CF-60
Bottom FlangeWorking Pressure
Size In. W.P. (P.S.I.)
BottomPreparation Outlets
DimensionsIn.(mm)
A B C D
ApproximateWeight
lb kg
Top FlangeWorking Pressure
Size In. W.P. (P.S.I.)
A
C
B
D
A
C
B
D
13
SINGLE COMPLETION HANGER
Size UPTBG O.D. H A WeightHanger in. mm in. mm in. mm in. mm in. mm lbs kg
7 !/16 179.4 1.660 42.2 6 !%/16 176.2 6 @(/32 175.4 1 !#/32 35.7 47 227 !/16 179.4 1.900 48.3 6 !%/16 176.2 6 @(/32 175.4 1 %/8 41.3 46 21
CF-5 7 !/16 179.4 2 #/8 60.3 6 !%/16 176.2 6 @(/32 175.4 2 !/8 54.0 43 207 !/16 179.4 2 &/8 73.0 6 !%/16 176.2 6 @(/32 175.4 2 %/8 66.7 39 187 !/16 179.4 3 !/2 88.9 6 !%/16 176.2 6 @(/32 175.4 3 !/8 79.4 33 157 !/16 179.4 1.900 48.3 6 !%/16 176.2 7 @(/32 200.8 1.668 42.4 57 26
CF-16B 7 !/16 179.4 2 #/8 60.3 6 !%/16 176.2 7 @(/32 200.8 1.933 49.1 55 25BPV 7 !/16 179.4 2 &/8 73.0 6 !%/16 176.2 7 @(/32 200.8 2.395 60.8 52 24
7 !/16 179.4 1.900 48.3 6 !%/16 176.2 6 !/4 158.8 2.000 50.8 37 17CF-3 7 !/16 179.4 2.063* 52.4 6 !%/16 176.2 6 !/4 158.8 2 !/8 54.0 35 16
7 !/16 179.4 2 #/8 60.3 6 !%/16 176.2 6 !/4 158.8 2 !%/32 62.7 32 157 !/16 179.4 2 &/8 73.0 6 !%/16 176.2 6 !/4 158.8 2 #!/32 75.4 30 147 !/16 179.4 1.900 48.3 6 !%/16 176.2 5 !#/16 147.6 — — 17 8
CF-16 7 !/16 179.4 2.063* 52.4 6 !%/16 176.2 5 !#/16 147.6 — — 16 7Stripper 7 !/16 179.4 2 #/8 60.3 6 !%/16 176.2 5 !#/16 147.6 — — 14 6
7 !/16 179.4 2 &/8 73.0 6 !%/16 176.2 5 !#/16 147.6 — — 11 5Other sizes available upon request*Integral
CF-16B Mandrel SuspensionBack Pressure Valve
CF-16 Mandrel SuspensionCF-5 WrapAround Hanger
H
O.D.A
H
O.D.A
H
O.D.A
14
The CF-1A-EN is a mandrel-typethreaded hanger with back pressurevalve threads and extended neck sealsthat provide a positive seal to isolate theflange and the ring gasket from wellpressure and fluids. The bowl seal is ef-fected by o-ring or compression typepackoff. The CF-1A-EN accepts down-hole control lines or injection tubinglines.
CF-TC-1WThe CF-TC-1W is a split type, wrap-around hanger which can be easily as-sembled around the tubing and loweredthrough the preventers. The hanger hasa compression type packoff which is ac-tuated by lockscrews. The tubing mustbe suspended from a tubing headadapter or the CF-BO-2 hanger cou-pling.
CF TC-1AThe WR-TC-1A is a threaded top andbottom mandrel-type hanger with anannulus seal energized by tubing weightand lockdown screws. The tubing is sus-pended directly from the hanger. For usein the WR-TC and WR-TCM tubingheads. Internal back pressure valvethreads are available upon request.
Approx.. Wgt.Size Lbs/Kg
7 !/16" x 2 #/8" O.D. EUE 8RF TBG. 72 337 !/16" x 2 &/8" O.D. EUE 8RF TBG. 72 337 !/16" x 3 !/@" O.D. EUE 8RF TBG. 72 33
11" x 2 #/8" O.D. EUE 8RF TBG. 72 3311" x 2 &/8" O.D. EUE 8RF TBG. 72 33
CF-60 Dual Split Hanger
• Simple to install through blow-outpreventers.
• Packoff is integral part of hanger seg-ment, eliminates extra procedure to in-stall sandwich-type packoff. Annulusseal is achieved when hangers areinstalled and seal actuated bylockdown screws.
• Tubing strings can be installed and re-moved independently, with maximumclearance for subsurface safety valvesor gas lift valves.
• Hangers are available with ControlFlow, back pressure valve profile andare available with control line prepa-ration for down hole surface controlledsubsurface safety valves.
Approx.. Wgt.Size Lbs/Kg
7 !/16" x 2 #/8" O.D. 68 317 !/16" x 2 &/8" O.D. 60 277 !/16" x 3 !/@" O.D. 55 2511" x 2 #/8" O.D. 142 6511" x 2 &/8" O.D. 140 64
CF-TCD-2CThe CF-TCD-2C is a straight borehanger which fits the TC tubing head andis easily aligned to suspend dual stringsof tubing. This hanger contains two man-drel bushings which are internallythreaded to accept the WR back pres-sure valve. Both mandrels are sus-pended in a master bushing. The pack-ing element is a sandwich-type packoff,easily lowered through the preventersand energized with the lock-downscrews in the tubing head.
TUBING HANGERS
CF-16 Stripper
H
O.D.
15
TYPE CF-02 TUBING SPOOL,TYPE CF-02 TUBING HANGER
CF-02 Spool Dimensional Data
BottomSize-Flange x Studded Bore Prep.
7!/16" 2000 x 2(/16" 2000 2(/16" 4!/2"
7!/16" 3000 x 2!/16" 5000 2!/16" 4!/2"
7!/16" 3000 x 2(/16" 5000 2(/16" 4!/2"
7!/16" 5000 x 2!/16" 5000 2!/16" 4!/2"
7!/16" 5000 x 2(/16" 5000 2(/16" 4!/2"
7!/16" 5000 x 3!/8" 5000 3!/8" 6%/16"
7!/16" 5000 x 4!/16" x 5000 4!/8" 6&/8"
9" 5000 x 2!/16" 5000 2!/16" 4!/2"
9" 5000 x 3!/8" 5000 3!/8" 6%/16"
9" 5000 x 4!/16" 5000 4!/8" 6&/8"
11" 5000 x 2(/16" 5000 2(/16" 4!/2"
7!/16" 10,000 x 2!/16" 10,000 2!/16" 4!/2"
7!/16" 10,000 x 2(/16" 10,000 2(/16" 4!/2"
7!/16" 10,000 x 3!/16" 10,000 3!/16" 6%/16"
9" 10,000 x 4!/16" 10,000 4!/16" 6&/8"
7!/16" 15,000 x 1!#/16" 15,000 1!#/16" 4!/2"
7!/16" 15,000 x 2!/16" 15,000 2!/16" 4!/2"
7!/16" 15,000 x 2 (/16" 15,000 2(/16" 4!/2"
CF-02 Tubing Hanger
*Hanger threaded for H back pressure valve
Size 4!/2" x 2#/8" API Upset Tubing
4!/2" x 2&/8" API Upset Tubing
6#/16" x 3!/2" API Upset Tubing
6&/8" x 4!/2" API Upset Tubing
CF-02 TUBING SPOOL ASSEMBLYThe CF-02 Tubing Spool Assembly ismade up of a CF-02 Spool, CF-02Tubing Hanger, CF-W Hanger, and aCFM or CFC Tubing Spool.
The CF-02 Tubing Hanger and BackPressure Valve are installed on thelast tubing joint and the CF-W Hangeris wrapped around the tubing belowthe CF-02 Hanger. This assembly islowered through the blowoutpreventers until the CF-W lands in thetubing spool. The tubing spool tie-down screws are tightened to ener-gize the CF-W Annulus Seal.
Once the CF-W Hanger is installedand the tie-down screws are tight-ened, the tubing string can be ma-nipulated above and below the pointof suspension, the blowout preventerscan be removed, and the Christmastree can be installed.
The CF-02 Spool or Christmas treeis screwed directly onto the CF-02Hanger while the hanger and tubingstring remain stationary.
CF-02 Coupling
16
STUDDED ADAPTERS AND FLANGES
Single Studded Adapter Seal Flange Dimensional Data
Bottom Top Min.Flange Flange Height Bore7!/16"-3000 2!/16"-5000 7!/2" 2!/16"
179.4mm/207Bar 52mm/345Bar 191mm 52mm7!/16"-3000 2(/16"-5000 7!/2" 2(/16"
179.4mm/207Bar 52mm/345Bar 191mm 65mm7!/16"-3000 3!/8"-3000 9" 3!/8"
179.4mm/207Bar 79mm/207Bar 229Bar 79mm7!/16"-3000 3!/8"-5000 7!/2" 3!/8"
179.4mm/207Bar 79mm/207Bar 191mm 79mm7!/16"-5000 2!/16"-5000 8" 2!/16"
179.4mm/345Bar 52mm/345Bar 203Bar 52mm7!/16"-5000 2(/16"-5000 8" 2(/16"
179.4mm/345Bar 52mm/345Bar 203Bar 65mm7!/16"-5000 3!/8"-5000 9" 3!/8"
179.4mm/345Bar 79mm/345Bar 229Bar 79mm7!/16"-10000 2!/16"-10000 10" 2!/16"
179.4mm/690Bar 52mm/690Bar 254Bar 52mm7!/16"-10000 2(/16"-10000 10" 2(/16"
179.4mm/690Bar 52mm/690Bar 254Bar 65mm7!/16"-10000 3!/16"-10000 10" 3!/16"
179.4mm/690Bar 79mm/414Bar 254Bar 77mm
All Dimensions in inches(mm)
Adapter seal flanges fitover Type CF ExtendedNeck Tubing Hangers toprovide a secondary sealand a means of testing thelower connection.
Single-Studded AdapterSeal Flange
Double-Studded AdapterSeal Flange
Double-Studded AdapterSeal Flange
Double Studded Adapter Seal Flange Dimensional DataBottom Top Min.Flange Flange Height Bore7!/16"-3000 2!/16"-5000 6" 2!/16"
179.4mm/207Bar 52mm/345Bar 152mm 52mm7!/16"-3000 2(/16"-5000 6" 2(/16"
179.4mm/207Bar 52mm/345Bar 152mm 65mm7!/16"-3000 3!/8"-5000 6" 2(/16"
179.4mm/207Bar 79mm/345Bar 152mm 65mm7!/16"-5000 2!/16"-5000 6" 2!/16"
179.4mm/345Bar 52mm/345Bar 152mm 52mm7!/16"-5000 2(/16"-5000 6" 2(/16"
179.4mm/345Bar 52mm/345Bar 152mm 65mm7!/16"-5000 3!/8"-5000 6" 3!/8"
179.4mm/345Bar 79mm/345Bar 152mm 79mm7!/16"-10000 2!/16"-10000 6" 2!/16"
179.4mm/690Bar 52mm/690Bar 152mm 52mm7!/16"-10000 2(/16"-10000 6" 2(/16"
179.4mm/690Bar 52mm/690Bar 152mm 65mm7!/16"-10000 3!/16"-10000 6" 3!/16"
179.4mm/690Bar 79mm/414Bar 152mm 77mm
All Dimensions in inches(mm)
CF-3S Seal Flanges for Slick-Neck HangersSize and Working Pressure Bottom Preparation
7!/16" 10,000 x 1!#/1 6" 10,000* 5!/2" Double P Seal179.4mm/690Bar x 46mm/690Bar 139mm
7!/16" 10,000 x 2!/16" 10,000 5!/2" Double P Seal179.4mm/690Bar x 52mm/690Bar 139mm
7!/16" 15,000 x 1!#/16" 15,000 5!/2" Double P Seal179.4mm/690Bar x 46mm/1035Bar 139mm
7!/16" 15,000 x 2!/16" 15,000 5!/2" Double P Seal179.4mm/690Bar x 52mm/1035Bar 139mm
7!/16" 15,000 x 2(/16" 15,000 5!/2" Double P Seal179.4mm/690Bar x 65mm/1035Bar 139mm
17
Tee
Tee and Cross Part Numbers and Dimensions
A B C DCenter Center
Maximum Service Nominal Vertical Outlet to Face to FacePressure Rating Vertical Outlet Bore Bore Vertical Run Outlet
2!/16" 52 2!/16" 52 2!/16" 52 2!/16" 52 3!/2" 88 3!/2" 882(/16" 65 2!/16" 52 2(/16" 65 2!/16" 52 3!/2" 88 4" 1012(/16" 65 2(/16" 65 2(/16" 65 2(/16" 65 4!/2" 114 4!/2" 1143!/8" 79 2!/16" 52 3!/8" 79 2!/16" 52 3!/2" 88 4!/2" 114
2000 PSI 3!/8" 79 2(/16" 65 3!/8" 79 2(/16" 65 4!/2" 114 4!/2" 1143!/8" 79 3!/8" 79 3!/8" 79 3!/8" 79 4!/2" 114 4!/2" 1144!/16" 103 2!/16" 52 4!/16" 103 2!/16" 52 4!/2" 114 5!/2" 1394!/16" 103 2(/16" 65 4!/16" 103 2(/16" 65 4!/2" 114 5!/2" 1394!/16" 103 3!/8" 79 4!/16" 103 3!/8" 79 4!/2" 114 5!/2" 1394!/16" 103 4!/16" 103 4!/16" 103 4!/16" 103 5!/2" 139 5!/2" 1392!/16" 52 2!/16" 52 2!/16" 52 2!/16" 52 4!/2" 114 4!/2" 1142(/16" 65 2!/16" 52 2(/16" 65 2!/16" 52 4!/2" 114 4!/2" 1142(/16" 65 2!/16" 52 2(/16" 65 2(/16" 65 5" 127 5" 1273!/8" 79 2!/16" 52 3!/8" 79 2(/16" 65 4!/2" 114 5" 127
3000 PSI 3!/8" 79 2(/16" 65 3!/8" 79 2(/16" 65 5" 127 5" 1273!/8" 79 3!/8" 79 3!/8" 79 3!/8" 79 5" 127 5" 1274!/16" 103 2!/16" 52 4!/16" 103 2!/16" 52 4!/2" 114 6" 1524!/16" 103 2(/16" 65 4!/16" 103 2(/16" 65 5" 127 6" 1524!/16" 103 3!/8" 79 4!/16" 103 3!/8" 79 5" 127 6" 1524!/16" 103 4!/16" 103 4!/16" 103 4!/16" 103 6" 152 6" 1522!/16" 52 2!/16" 52 2!/16" 52 2!/16" 52 4!/2" 114 4!/2" 1142(/16" 65 2!/16" 52 2(/16" 65 2!/16" 52 4!/2" 114 5" 1272(/16" 65 2(/16" 65 2(/16" 65 2(/16" 65 5" 127 5" 1273!/8" 79 2!/16" 52 3!/8" 79 2!/16" 52 4!/2" 114 5!/2" 139
5000 PSI 3!/8" 79 2(/16" 65 3!/8" 79 2(/16" 65 5!/2" 139 5!/2" 1393!/8" 79 3!/8" 79 3!/8" 79 3!/8" 79 5!/2" 139 5!/2" 1394!/16" 103 2!/16" 52 4!/16" 103 2!/16" 52 4!/2" 114 6!/2" 1654!/16" 103 2(/16" 65 4!/16" 103 2(/16" 65 5" 127 6!/2" 1654!/16" 103 3!/8" 79 4!/16" 103 3!/8" 79 5!/2" 139 6!/2" 1654!/16" 103 4!/16" 103 4!/16" 103 4!/16" 103 6!/2" 165 6!/2" 1651!#/16" 46 1!#/16" 46 1!#/16" 46 1!#/16" 46 4#/8" 111 4#/8" 1112!/16" 52 1!#/16" 46 2!/16" 52 1!#/16" 46 4#/8" 111 4#/8" 1112!/16" 52 2!/16" 52 2!/16" 52 2!/16" 52 4#/8" 111 4#/8" 1112(/16" 65 1!#/16" 46 2(/16" 65 1!#/16" 46 4!/2" 114 5!/8" 1302(/16" 65 2!/16" 52 2(/16" 65 2!/16" 52 4!/2" 114 5!/8" 1302!/16" 52 2(/16" 65 2(/16" 65 2(/16" 65 5!/8" 130 5!/8" 1303!/16" 77 1!#/16" 46 3!/16" 77 1!#/16" 46 4!/2" 114 5&/8" 149
10,000 PSI 3!/16" 77 2!/16" 52 3!/16" 77 2!/16" 52 4!/2" 114 5&/8" 1493!/16" 77 2(/16" 65 3!/16" 77 2(/16" 65 5!/8" 130 5&/8" 1493!/16" 77 3!/16" 77 3!/16" 77 3!/16" 77 5&/8" 149 5&/8" 1494!/16" 103 1!#/16" 46 4!/16" 103 1!#/16" 46 6&/8" 174 6&/8" 1744!/16" 103 2!/16" 52 4!/16" 103 2!/16" 52 6&/8" 174 6&/8" 1744!/16" 103 2(/16" 65 4!/16" 103 2(/16" 65 5!/8" 130 6&/8" 1744!/16" 103 3!/16" 77 4!/16" 103 3!/16" 77 5&/8" 149 6&/8" 1744!/16" 103 4!/16" 103 4!/16" 103 4!/16" 103 6&/8" 174 6&/8" 1741!#/16" 46 1!#/16" 46 1!#/16" 46 1!#/16" 46 5" 127 5" 1272!/16" 52 1!#/16" 46 2!/16" 52 1!#/16" 46 5" 127 5" 1272!/16" 52 2!/16" 52 2!/16" 52 2!/16" 52 5" 127 5" 1272(/16" 65 1!#/16" 46 2(/16" 65 1!#/16" 46 5!/2" 139 5!/2" 1392(/16" 65 2!/16" 52 2(/16" 65 2!/16" 52 5!/2" 139 5!/2" 139
15,000 PSI 6 BX 3!/16" 77 1!#/16" 46 3!/16" 77 1!#/16" 46 6%/16" 160 6%/16" 1603!/16" 77 2!/16" 52 3!/16" 77 2!/16" 52 6%/16" 160 6%/16" 1603!/16" 77 2(/16" 65 3!/16" 77 2(/16" 65 6%/16" 160 6%/16" 1604!/16" 103 2!/16" 52 4!/16" 88 2!/16" 52 5" 127 7#/4" 1964!/16" 103 4!/16" 103 4!/16" 103 4!/16" 103 7#/4" 196 7#/4" 196
FORGED STEEL, STUDDED TEES AND CROSSES
CrossTee and Cross
Dimensional View
18
DUAL MANIFOLD CROSSES, DUAL 5-BOLTTEES AND DUAL FLANGES
Dual Manifold Cross Dimensional Data
Flange Vertical CenterlineSize Bores Spacing Outlets
7!/16" 3000 1!#/16" x 1!#/16" 2@%/32" 2!/16"-5000
7!/16" 3000 2!/16" x 2!/16" 3#%/64" 2!/16"-5000
7!/16" 5000 1!#/16" x 1!#/16" 2@%/32" 2!/16"-5000
7!/16" 5000 2!/16" x 2!/16" 3#%/64" 2!/16"-5000
7!/16" 5000 2(/16" x 2!/16" 3#%/64" 2!/16"-5000
7!/16" 10000 1!#/16" x 1!#/16" 2@%/32" 2!/16"-10000
7!/16" 10000 2!/16" x 2!/16" 3#%/64" 2!/16"-10000
7!/16" 10000 2(/16" x 2!/16" 3#%/64" 2!/16"-10000
Dual Five Bolt Tee Dimensional Data
End CenterlineSize Connections Spacing Outlets
1!#/16" x 1!#/16" 1!#/16"-5000 2@%/32" 2" L.P.
1!#/16" x 1!#/16" 1!#/16"-5000 2@%/32" 2!/16"-5000
2!/16" x 2!/16" 2!/16"-5000 3#%/64" 2" L.P.
2!/16" x 2!/16" 2!/16"-5000 3#%/64" 2!/16"-2000
2!/16" x 2!/16" 2!/16"-5000 3#%/64" 2!/16"-5000
Dual Flange Dimensional Data
Flange Vertical Centerline TopSize Bores Spacing Connection
7!/16"-2000 1!#/16" x 1!#/14" 2@%/32" 1!#/16" - 5 Bolt
7!/16"-3000 1!#/16" x 1!#/16" 2@%/32" 1!#/16" - 5 Bolt
7!/16"-5000 1!#/16" x 1!#/16" 2@%/32" 1!#/16" - 5 Bolt
7!/16"-2000 2!/16" x 2!/16" 3#%/64" 2!/16" - 5 Bolt
7!/16"-3000 2!/16" x 2!/16" 3#%/64" 2!/16" - 5 Bolt
7!/16"-5000 2!/16" x 2!/16" 3#%/64" 2!/16" - 5 Bolt
7!/16"-3000 2!/16" x 2!/16" 3#%/64" 2#/8" EU 8R
7!/16"-5000 2!/16" x 2!/16" 3#%/64" 2#/8" EU 8R
STUDDED DUAL TEE
DUAL SEGMENTED TEE
DUALFLANGE
19
TREE CAP ASSEMBLIESTYPE C-T AND C-TS HANGER FLANGES
Tree Cap Assemblies
Size & API Min. LiftWorking Pressure Ring No. Bore Thread Height MM
2!/16"-2000 R-23 2!/16" 2#/8 EUE 8R 7!/8" 180
2(/16"-2000 R-26 2(/16" 2&/8 EUE 8R 7!/8" 180
3!/8"-2000 R-31 3!/8" 3!/2 EUE 8R 9#/4" 247
3!/8"-3000 R-31 3!/8" 3!/2 EUE 8R 9#/4" 247
2!/16"-5000 R-24 2!/16" 2#/8 EUE 8R 7#/4" 196
2(/16"-5000 R-27 2(/16" 2&/8 EUE 8R 8!/16" 204
3!/8"-5000 R-35 3!/8" 3!/2 EUE 8R 10!/16" 269
2!/16"-10000 BX-152 2!/16" 2#/8 EUE 8R 8" 203
2(/16"-10000 BX-153 2(/16" 2&/8 EUE 8R 7(/16" 192
3!/16"-10000 BX-154 3!/16" 3!/2 EUE 8R 13!/8" 333
2!/16"-15000 BX-152 2!/16" 2#/8 EUE 8R 8!/8" 206
CF-11 Bottom Hole Test Adapters are furnished in various sizesand working pressures to 15,000 PSI. The CF-11 Adapters arefor use in extreme pressure requirements.
C-TS Hanger Flange Dimensional Data
Bottom Top Thd MinFlange Flange Size Bore Height MM
7!/16"-2000 2!/16"-2000 2#/8 EUE 2!/16" 3!/2" 887!/16"-2000 2(/16"-2000 2&/8 EUE 2(/16" 3!/2" 887!/16"-3000 2!/16"-5000 2#/8 EUE 2!/16" 3!/2" 887!/16"-3000 2(/16"-5000 2&/8 EUE 2(/16" 3!/2" 887!/16"-3000 3!/8"-3000 3!/2 EUE 3!/8" 3!/2" 887!/16"-5000 2!/16"-5000 2#/8 EUE 2!/16" 4" 1017!/16"-5000 2(/16"-5000 2&/8 EUE 2(/16" 4" 1017!/16"-5000 3!/8"-5000 3!/2 EUE 3!/8" 4!/2" 22
C-T Hanger Flange Dimensional Data
Bottom Thd Size MinFlange Male x Female Bore Height MM
7!/16"-2000 2#/8 EUE 2!/16" 7" 1777!/16"-2000 2&/8 EUE 2(/16" 7!/4" 1847!/16"-3000 2#/8 EUE 2!/16" 7!/4" 1847!/16"-3000 2&/8 EUE 2(/16" 7!/4" 184
9"-2000 2#/8 EUE 2!/16" 7!/4" 1849"-2000 2&/8 EUE 2(/16" 7!/4" 1849"-3000 2#/8 EUE 2!/16" 7!/2" 1909"-3000 2&/8 EUE 2(/16" 7!/2" 190
20
C-H BACK PRESSURE VALVES AND PLUGS
The C-H Back Pressure Valve is a one-waycheck valve used to seal tubing pressure to20,000 psi while the blowout pre venters areremoved and the Christmas trees is installed. Italso permits fluid to be circulated down the tubingand prevents back flow.
The C-H Two-way check Valve is installed in thetubing hanger to allow the Christmas tree to betested to 15,000 psi. The two-way check valveallows pressure to be equalized above and belowthe seal, ensuring safe removal from the tubinghanger.
The shallow threads on the C-H Back PressureValve and C-H Two-way Check valve providestrength, allowing the valves to withstand ex-tremely high pressure without significantly reduc-ing the tubing hanger bore size.
BACK PRESSURE VALVES & CONTROL PLUGS
Nominal Max Tubing Min. Bore Min. TreeSize O.D. O.D. BPV Thd. Bore
1#/4"(44.4mm) 1.775 2 !/16"(52.4mm) 1.695 1!#/16"(46.0mm)2"(50.8mm) 2.020 2#/8"(60.3mm) 1.940 2!/16"(52.4mm)
2!/2"(63.5mm) 2.485 2&/8"(73.0mm) 2.405 2(/16"(65.1mm)3"(76.2mm) 3.030 3!/2"(88.9mm) 2.950 3!/8"(79.4mm)
Outlet Size Thread Size& Working Pressure and Type
1!#/16" -10000 & 15000 1!/4" L.P.
2!/16" -5000, 10000 & 15000 1!/2" Plain Tubing3!/8" -5000 2!/2" Plain Tubing
3!/16" -10000 2!/2" Plain Tubing
Size Thd. O.D. End2"(50.8mm) L.P. 2#/8"(60.3mm) Plain
2" L.P. 2#/8"(60.3mm) Tapped !/2
2!/2" L.P. 2#/8"(60.3mm) Plain
2!/2" L.P. 2&/8"(73.0mm) Tapped !/2
3" L.P. 3!/2"(88.9mm) Plain
3" L.P. 3!/2"(88.9mm) Tapped !/2
2#/8" EUE 2!(/32"(65.9mm) Tapped !/2
2&/8" EUE 3#/32"(78.6mm) Tapped !/2
3!/2" EUE 3#/4"(95.3mm) Tapped !/2
Valve Removal and Control PlugsVALVE REMOVAL AND CONTROL PLUGS
The control plug is a check valve which allows apressure gauge to be installed in the housing orspool outlet companion flange.The check valve contains well pressure when the1/2” pipe plug is removed.
The control plug is ported to eliminate the pas-sage of well fluid around the threads when thepressure gauge taps the well pressure.The valve removal plug allows the installation andremoval of a valve under pressure by means of alubricator. Bull Plugs
H Back Pressure Valve
Valve RemovalPlug
Control Plug
Tapped Bull Plug
Solid Bull Plug
21
COMPANION, BLIND AND WELD NECK FLANGES
Flange Part Numbers
Companion Flanges Blind or Tapped Flanges Weld Neck Flanges
Working Pressure Ring Thread Part Tapped Part(mm/Bar) Gasket Description Number Plain Tapped !/2" Autoclave Recessed Prep Number
1!#/16" 10M(46/690) BX 151 2" LP 212901 212900 212913 — — 2" XX 212902
1!#/16" 15,000(46/1035) BX 151 2" LP 214302 214300 — 214305 214318 2" XX 214304
2!/16" 2000(52/138) R 23 2" LP 210001 210000 — — — — —
2!/16" 5000(52/345) R 24 2" LP 211901 211900 211932 — — 2" XX 211904
2!/16" 10,000(52/690) BX 152 2" LP 213001 213000 213043 — — 2" XX 213003
2!/16" 15,000(52/1035) BX 152 2" LP 214403 214400 — 214414 — 2" XX 214408
2(/16" 5,000(65/345) R 27 2&/8" EUE 212001 212000 — — — 2!/2" XX 212002
2(/16" 10,000(65/690) BX 153 2&/8" EUE 213106 213100 213119 — — 3" XX 213113
2(/16" 15,000(65/1035) BX 153 2&/8" EUE 214506 214500 — 214512 — 2!/2" XXX 214502
3!/8" 3000(79/207) R 31 3" LP 211001 211000 — — — 3" XX 211002
3!/8" 5000(79/345) R 35 3" LP 212102 212100 — — — 3" XX 212106
3!/16" 10,000(77/690) BX 154 3!/2" EUE 213202 213200 213225 — — 4" XX 213207
3!/16" 15,000(77/1035) BX 154 3!/2" EUE — 214600 — 214652 — 4" XX 214610
4!/16" 3000(103/207) R 37 4" LP 211103 211100 211114 — — 4" XX 211101
4!/16" 5000(103/345) R 39 4" LP 212213 212200 212224 212253 — 4" XX 212209
4!/16" 10,000(103/690) BX 155 4" XXH 213304 213300 — — — 5" XX 213305
4!/16" 15,000(103/1035) BX 155 4" XXH 214710 214706 — — — 4" XX 214710
Other sizes available.
Companion Flange Blind Flange
Weld Neck Flange
Size and
22
STUD BOLTS, NUTS, AND RING GASKETS
PressurePressure Energized Energized
Gaskets for Gaskets for Type Gaskets forSize and 6B Flanges 6B Flanges Type 6BXWorking Stud Diameter Number FlangesPressure and Length of Studs
StandR RX of BX
Number Number RX Rings Number
1!/1 6" 10,000 #/4" x 5!/4" 8 - - - 150
1!!/16" 15,000 #/4" x 5!/2" 8 - - - 150
1!#/1 6" 10,000 #/4" x 5!/4" 8 - - - 151
1!#/1 6" 15,000 &/8" x 5&/8" 8 - - - 151
1!#/1 6" 20,000 1" x 7#/4" 8 - - - 151
2!/1 6" 2000 %/8" x 4#/4" 8 23 23 !%/32" -
2!/1 6" 5000 &/8" x 6!/4" 8 24 24 !%/32" -
2!/1 6" 10,000 #/4" x 5!/2" 8 - - - 152
2!/1 6" 15,000 &/8" x 6!/4" 8 - - - 152
2!/1 6" 20,000 1!/8" x 8!/2" 8 - - - 152
2(/16" 2000 #/4" x 5!/4" 8 26 26 !%/32" -
2(/16" 5000 1" x 7" 8 27 27 !%/32" -
2(/16" 10,000 &/8" x 6!/4" 8 - - - 153
2(/16" 15,000 1" x 7" 8 - - - 153
2(/16" 20,000 1!/4" x 9!/2" 8 - - - 153
3!/8" 2000 #/4" x 5!/2" 8 31 31 !%/32" -
3!/8" 3000 &/8" x 6!/4" 8 31 31 !%/32" -
3!/8" 5000 1!/8" x 7#/4" 8 35 35 !%/32" -
3!/8" 10,000 1" x 7!/4" 8 - - - 154
3!/1 6" 15,000 1!/8" x 8" 8 - - - 154
3!/1 6" 20,000 1#/8" x 10!/4" 8 - - - 154
4!/1 6" 2000 &/8" x 6!/4" 8 37 37 !%/32" -
4!/1 6" 3000 1!/8" x 7!/2" 8 37 37 !%/32" -
4!/1 6" 5000 1!/4" x 8!/2" 8 39 39 !%/32" -
4!/1 6" 10,000 1!/8" x 8#/8" 8 - - - 156
4!/1 6" 15,000 1#/8" x 9#/4" 8 - - - 155
4!/1 6" 20,000 1#/4" x 12%/8" 8 - - - 155
7!/1 6" 2000 1" x 7!/2" 12 45 45 !%/32" -
7!/1 6" 3000 1!/8" x 8!/2" 12 45 45 !%/32" -
PressurePressure Energized Energized
Gaskets for Gaskets for Type Gaskets forSize and 6B Flanges 6B Flanges Type 6BXWorking Stud Diameter Number FlangesPressure and Length of Studs
StandR RX of BX
Number Number RX Rings Number
7!/16" 5000 1#/8" x 11!/4" 12 46 46 !%/32" -
7!/16" 10,000 1!/2" x 11#/4" 12 - - - 156
7!/16" 15,000 1!/2" x 13" 16 - - - 156
7!/16" 20,000 2" x 18" 16 - - - 156
9" 2000 1!/8" x 8!/2" 12 49 49 !%/32" -
9" 3000 1#/8" x 9!/2" 12 49 49 !%/32" -
9" 5000 1%/8" x 12!/2" 12 50 50 !%/32" -
9" 10,000 1!/2" x 13!/4" 16 - - - 157
9" 15,000 1&/8" x 16!/4" 16 - - - 157
11" 2000 1!/4" x 9!/4" 16 53 53 !%/32" -
11" 3000 1#/8 x 10" 16 53 53 !%/32" -
11" 5000 1&/8" x 14!/2" 12 54 54 !%/32" -
11" 10,000 1#/4" x 15#/8" 16 - - - 158
11" 15,000 2" x 19#/4" 20 - - - 158
13%/8" 2000 1!/4" x 9!/2" 20 57 57 !%/32" -
13%/8" 3000 1#/8" x 10#/4" 20 57 57 !%/32" -
13%/8" 5000 1%/8" x 12#/4" 16 - - - 160
13%/8" 10,000 1&/8" x 17#/4" 20 - - - 159
13%/8" 15,000 2!/4" x 21" 20 - - - 159
16#/4" 2000 1!/2" x 10#/4" 20 65 65 !%/32" -
16#/4" 3000 1%/8" x 12!/4" 20 66 66 !%/32" -
16#/4" 5000* 1#/4" x 14%/8" 16 - - - 161
16#/4" 5000 1&/8" x 14#/4" 16 - - - 162
16#/4" 10,000 1&/8" x 17#/4" 24 - - - 162
18#/4" 5000 2" x 18" 20 - - - 163
18#/4" 10,000 2!/4" x 22&/8" 24 - - - 164
21!/4" 2000 1%/8" x 12!/4" 24 73 73 !(/32" -
20#/4" 3000 2" x 15!/4" 20 74 74 @#/32" -
*Obsolete ApI 5000 psi WP 7500 Test. **For black studs and nuts, drop the second dash number (-10).
STUD BOLTS, NUTS and RING GASKETS
23
AB Adjustable Choke3000/5000/psi WP 2000 psi WP
AB-F Adjustable Choke5000/10000/15000 psi WP
RB Positive Choke5000/10000 psi WP
CHOKES
24
Unitized Wellhead — Metal-to-Metal Seal Tubing Hangar
CHRISTMAS TREES
25
Unitized Wellhead for Tubingless Completion
CHRISTMAS TREES
26
Wellhead with Metal-to-Metal Seal
CHRISTMAS TREES
27
Unitized Wellhead - Tree with Pneumatic Actuator
CHRISTMAS TREES
28
Unitized Wellhead with "Insta-Lock" Connector
CHRISTMAS TREES
29
Storage Tree
CHRISTMAS TREES
30
Geothermal
CHRISTMAS TREES
1
TABLE OF CONTENTS
PageBW Handwheel Operated
Gate Valves .................................................................2
Manual Type BW Gate Valves..........................................4
Assembly Part Numbers forType BW HandwheelOperated Gate Valves .................................................5
Type BW Gate Valves .......................................................6
Valve Specifications .........................................................7
Single Solid Block Master Valves .....................................8
Dual Valves.......................................................................9
Hydraulic BWH Valves....................................................10
Part Numbers for Hydraulic Operated Type BWH Gate Valves ................................................................12
Surface Safety Valves .....................................................14
Full Bore Diverter Valves ................................................15
3!/16" 10,000 PSI WP Type DW Sub-Sea Fail Safe Valves ..........................................16
3!/16" 15,000 PSI WP Type DW Sub-Sea Fail Safe Valves ..........................................17
Type DW Sub-Sea Fail Safe Valves ...............................18
Control Flow DW-10 Gate Valve ....................................19
Type BR 7!/16" 5/10,000 Hydraulic Gate Valves ................................................................20
Type BR 7!/16" 5/10,000 Manual Gate Valves ................................................................21
Type BR 7!/16" 15,000 Hydraulic Gate Valves ................................................................22
Floguard Check Valves ..................................................23
Flocheck .........................................................................24
Terms and Conditions ....................................................25
2
BW HANDWHEEL OPERATED GATE VALVES
PR-2 Nitrogen Tested at15000 PSI WP Per API16A Appendix F.
3
BW HANDWHEEL OPERATED GATE VALVES
The “BW” gate valve is API approved for severeservices such as choke-and-kill manifolds andChristmas trees. By applying the newesttechnology in the most critical area, the sealingsurfaces of the gate and seats, Flocon engineershave gained many advantages over other gatevalve designs.
1. Hard-faced, alloy steel gate. The gate facing hasa high resistance to wear and corrosion. It alsoreduces friction between the gate and seats, soless effort is required to open and close thevalve.
2. Solid tungsten carbide seats. These seats alsoare highly resistant to wear and corrosion, withlonger life expectancy than seats made of othermaterials.
3. Holds pressure from either direction. Linepressure forces the gate against the downstreamseat for a positive seal from either side.Therefore, the valve can be mounted facingeither way in your line.
4. Venting prevents valve damage. the body cavityis vented to the valve’s upstream side. Sincethere is no danger of a pressure lock . . nochance of trapped fluids damaging the valve dueto heat expansion.
5. Stress on the stem is minimal. Once the gate isclosed, no further tightening or wedging isrequired for a positive seal. This reduces thehazard of stress corrosion cracking the stem.
6. Gate guides keep body cavity clear. Metal guidesrun the full length of the gate’s travel.
A new approach to dependablesealing, long life, corrosionresistance and easy operation.
7.Alloy steel valve body is heat-treated to NACEspecifications.
8. Easy opening and closing. The combination ofhard facing on the gate, Teflon® lining in thestem packing and needle thrust bearingsreduces the effort required to turn thehandwheel.
9. U-type stem packing is Teflon® lined. Reducedfriction between the packing and stem duringvalve opening and closing prolongs packing life.10. Packing can be replaced with pressure in theline. The operating stem backseats, so allpacking can be changed under pressure, ifnecessary.
11. Maintenance is simple. The gate, gate guidesand seats can be replaced without removing thevalve body from the line. They do not require aselective fit, and no special tools are needed.
12. Bonnet seal is a metal gasket in 5,000 psivalves. A BX-type ring gasket is used in 10,000and 15,000 psi valves.
13. Interchangeable with API gate valves. “BW”valves can be substituted for other gate valves ofcomparable size and pressure rating in existingmanifolds and Christmas trees.
14. Selection. Flocon’s Type “BW” gate valves areavailable in pressure ratings to 15,000 psi, in afull array of trims, with manual or hydraulicoperators. High temperature models (manualonly) are available.
For details contact the Flocon office nearest you.
4
MANUAL TYPE BW GATE VALVES
PR-2 Nitrogen Tested at15000 PSI WP Per API16A Appendix F.
Part Qty 1!#/16"10M
1!#/16"15M
3. Bonnet 1 564857 5651024. Packing Gland 1 564207 5642075, Bearing Cap 1 564202 5642026. Stem Adapter 1 564205 5642057. Stem 1 564213 5642138. Retainer Plate 2 564861 5648619. Gate 1 564860 56486010. Body Bushing 2 564868 56486811. Seat Ring 2 564862 56486212. Stem Pin 1 564206 56420613. Bonnet Gasket 1 564858 56485814. Seal Ring, Seat 2 564863 56486315. Seal Ring, Body Bushing 2 564867 56486716. "O" Ring, Bearing Cap 1 030606 03060617. Grease Fitting 2 564225 56422518. "O" Ring, Stem Adapter 1 030591 03059119. Handwheel 1 564251 56425120. Stud, Tap End 8, 12* or 16* 564256 56510621. Nut, Bonnet 8, 12* or 16* 020003 02001022. Stem Packing 1 564208 56420823. Alignment Pin 2 N/A N/A24. Injector Plug 1 564226 56422625. Bolt, Hex, Head 1 010239 01023926. Gate Guide 2 564869 56486927. Bearing, Thrust 2 564204 56420428. Race, Thrust Bearing 4 564203 56420329. Nut, Hex 1 020006 02000630. Check Valve 1 564379 564379
*12 Required **16 Required
618
17
1216
42827
5
227
20
21
3
13
23
19
14
11
15
10
9
8
26
24 30
25 29
5
ASSEMBLY PART NUMBERS FOR TYPE BWHANDWHEEL OPERATED GATE VALVES
Assembly Part Numbers For TypeBW Handwheel Operated
Gate Valves
2!/16"5M
2!/16"10M
2!/16"15M
2(/16 "5M
2(/16 "10M
2(/16 "15M
3!/8"5M
3!/16"10M
3!/16"15M
4!/16"5M
4!/16"10M
14!/16"5M
7!/16"2M
7!/16"3M
7!/16"5M
564211 564357 565152 564757 564807 565202 564257 564407 565258 564307 564457 565302 564607 564657 564707564207 564207 564207 564207 564207 564469 564207 564207 565257 564207 564469 565303 564469 564469 564469564202 564202 564202 564202 564202 564470 564202 564202 565262 564202 564470 565304 564470 564470 564470564205 564205 564205 564205 564205 564471 564205 564205 565263 564205 564471 565305 564471 564471 564471564213 564213 564213 564759 564759 565203 564259 564259 565256 564309 564473 565306 564609 564609 564609564215 564215 564215 564761 564761 565204 564261 564261 565259 564311 564472 565307 564611 564611 564611564214 564214 564214 564760 564760 565205 564260 564260 565260 564310 564460 565308 564610 564610 564610564222 564222 564222 564768 564768 565206 564268 564413 565252 564318 564463 565309 564618 564618 564618564216 564216 564216 564762 564762 565207 564262 564262 564261 564312 564468 565310 564612 564612 564612564206 564206 564206 564206 564206 564467 564206 564206 565311 564206 564467 565311 564467 564467 564467564212 564358 564358 564758 564808 565208 564258 564409 565253 564308 564459 565312 564608 564608 564608564217 564217 564217 564763 564763 565209 564263 564263 565255 564313 564313 565313 564613 564613 564613564221 564221 564221 564767 564767 565210 564267 564267 565255 564317 564317 565314 564617 564617 564617030606 030606 030606 030606 030606 030182 030606 030606 030359 030606 030182 030362 030182 030182 030182564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225030591 030591 030591 030591 030591 030655 030591 030591 030114 030591 030655 030602 030655 030655 030655564201 564251 564251 564201 564251 564251 564251 564401 564401 564251 564401 564401 564251 564251 564401564210 564356 565153 564756 564806 565211 564256* 564406 565271** 564306 564456 565315 564606* 564356* 564706*020009 020003 020010 020001 020010 020003 020003 020011 565268** 020010 020012 020013 020001 020003* 020011*564208 564208 564208 564208 564208 564454 564208 564208 565316 564208 564454 565316 564454 564454 564454050090 N/A N/A 050090 N/A N/A 050460 N/A N/A 050460 N/A N/A 050460 050460 050460564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239564223 564223 564223 564769 564769 565212 564269 564414 565251 564319 565317 565317 564619 564619 564619564204 564204 564204 564204 564204 564453 564204 564204 565318 564204 564453 565318 564453 565453 564453564203 564203 564203 564203 564203 564452 564203 564203 565319 564203 564452 565319 564452 564452 564452020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006
N/A 564379 564379 N/A 564379 564379 N/A 564379 564379 N/A 564379 564379 N/A N/A N/A
Part Numbers by Pressure & Sizes (inches - psi)
Size &PressureRating
Flanged Ends
T-2 Trim w/Standard
Ring Grooves
1!#/16"-10000 5648501!#/16"-15000 5651002!/16"-5000 5642002!/16"-10000 5643502!/16"-15000 5651502(/16"-5000 5647502(/16"-10000 5648002(/16"-15000 5652003!/8"-3000 5650003!/8"-5000 5642503!/16"-10000 5644003!/16"-150000 5652504!/16"-3000 5650504!/16"-5000 5643004!/16"-10000 5644504!/16"-15000 5653007!/16"-2000 5646007!/16"-3000 5646507!/16"-5000 564700
6
TYPE BW GATE VALVES
Lubrication Chart
Working Pressure 3000 5000 10000 15000Size & Bore 2!/16 2(/16 3!/8 4!/8 2!/16 2(/16 3!/8 4!/8 1!#/16 2!/16 2(/16 3!/16 4!/16 1!#/16 2!/16 2(/16 3!/16
E to E Thd 10%/8 12#/8 13%/8 N/A 10%/8 12#/8 13%/8 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/AE to E FLG 14%/8 16%/8 17!/8 20!/8 14%/8 16%/8 18%/8 21%/8 18!/4 20!/2 22!/4 24#/8 26#/8 18 19 21 23(/16
Width 6#/4 7%/8 7!/2 10!/2 7 8#/16 9!/4 10!#/16 9!/16 9#/8 9!#/16 10!/4 12!#/16 9&/8 9&/8 11!/2 13(/16
CL to Top 13 N/A 16!#/16 18&/16 15!/8 15!%/16 16!#/16 18&/16 15!/8 15!/8 15!#/16 16&/8 19!!/16 15!/8 15!/8 17#/16 20!%/16
CL to Bottom 5%/8 6!/2 7#/8 9!/8 5%/8 6!/2 7#/8 9!/8 5#/4 5&/8 6!#/16 8!/16 10!/16 5&/8 6!/8 7%/16 9!/4
CL to H/W 15#/8 16!/8 19!/16 20!!/16 17#/8 18!/8 19!/16 20!!/16 17#/8 17#/8 18!/8 18!/16 20!%/16 17#/8 17#/8 19(/16 22#/16
H/W O.D. 14 14 14 18!/2 14 14 18!/2 18!/2 14 18!/2 18!/2 24 24 18!/2 18!/2 18!/2 24API Ring R-24 R-27 R-31 R-37 R-24 R-27 R-35 R-39 151 152 153 154 155 151 152 153 154Weight FLG 180 249 282 450 182 255 360 545 270 275 485 680 1057 275 350 800 1065Weight THD 130 185 210 N/A 130 190 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
OperationalProperties
Lubricant Name
CF #1 CF #3 CF Artic 70
Standard Crude E G E
Low Temp. to - 70º P F E
High Temp. to - 650º P E P
H2S (Sour Gas) G F F
CO2 G F F
Diesel E P P
Gass Well Condensates G F F
E - Excellent G - Good F - Fair P - Poor
Lubricant TypePail Drum
10 LB 40 LB 100 LB 400 LB
CF - #1 564241-1 564241-2 564241-3 564241-4
CF - #3 564441-1 564441-2 564441-3 564441-4
CF - Artic 70 564641-1 564641-2 564641-3 564641-4
Bore Size(Inches) Pressure
LubricantWeight
(Pounds)
1!#/16 ALL 2.0
2!/16 ALL 2.1
2(/16 To 10,000 3.4
2(/16 15,000 5.4
3!/8 To 5,000 5.3
3!/16 10-15,000 8.0
4!/16 To 5,000 10.8
4!/16 10-15,000 11.4
6!/8 ALL 26.0
7!/16 ALL
9 3,000
11 3,000
13%/8 3,000
Gate Valve For Production Service Dimensional Data And Specifications
A
B
C
D
7
VALVE SPECIFICATIONS
Control Flow Inc.,Standard Materials Used In type 'BW', 'BR' & 'DW' Gate Valves
Notes:1. Controlled Hardness is 235 BHN MAX2. T-C Hardface3. Charpy V-Notch test per API/DNV required for
any trim at low temperature service.Temperature to be specified if above 250°F
4. Tungsten carbide hardface
OperatingRecommendations
Overtightening the type BW Gate Valve doesnot assist in affecting a seal.
Jamming the gate may prevent the valvefrom sealing.
Recommended operative procedure is:
1. Opening the valveTurn the handwheel counter-clockwise untilthe gate shoulders, then clockwise onequarter turn.
2. Closing the valveTurn the handwheel clockwise until the gateshoulders in the bottom of the body, thencounter-clockwise one quarter turn.
SizeNo. of Turns to
Open Gate
1!#/16" - 10000 12!/2
1!#/16" - 15000 12!/2
2!/16" - 5000 12!/2
2!/16" - 10000 12!/2
2!/16" - 15000 12!/2
2(/16" - 5000 15!/4
2(/16" - 10000 15!/4
2(/16" - 15000 15#/4
3!/8" - 5000 18!/4
3!/16" - 10000 18!/4
3!/16" - 15000 15!/2
4!/16" - 5000 23!/8
4!/16" - 10000 23!/8
4!/16" - 15000 29!/2
7!/16" - 2000* 33!/8
7!/16" - 3000* 33!/8
7!/16" - 5000* 33!/8
Service TrimCode
PressureRating(PSI)
1, 3Body
1, 3Bonnet
BonnetSeal
Gate Seat BodyBushing
Stem
Oil and GasGeneralService
T-15000 API II API II
316 SS 44130
StainlessSteel
17-4PH 17-4PH10,000 &15,000 API III API III
Oil and GasH2S Per NACE
MR-01-75T-2
5000 API II API II316 SS 2
4130TungstenCarbide
17-4PH 17-4PH10,000 &15,000
API III API III
Oil and GasH2S and CO2
T-35000
API IICA-15
API II410 SS
316 SS2
410 SSTungstenCarbide 17-4PH 17-4PH
10,000 &15,000
API III410 SS
API III410 SS
Type 'BW' and Type'BWH' Gate Valves
8
SINGLE SOLID BLOCK MASTER VALVES
Run WorkingPressure Style Bottom
FlangeTop
ConnectionOutlet
ConnectionOverallHeight
2!/16" 5000 C-FB/C-FG 7!/16"-5000 2!/16"-5000 2!/16"-5000 28"
2(/16" 5000 C-FB/C-FG 7!/16"-5000 2(/16"-5000 2!/16"-5000 28!/2"
2!/16" 10000 C-FB/C-FG 7!/16"-10000 2!/16"-10000 2!/16"-10000 28"
2(/16" 10000 C-FB/C-FG 7!/16"-10000 2(/16"-10000 2!/16"-10000 28!/2"
2!/16" 5000 C-FF/C-FH 7!/16"-5000 2!/16"-5000 2!/16"-5000 36"
2(/16" 5000 C-FF/C-FH 7!/16"-5000 2(/16"-5000 2!/16"-5000 36"
2!/16" 10000 C-FF/C-FH 7!/16"-10000 2!/16"-10000 2!/16"-10000 36"
2(/16" 10000 C-FF/C-FH 7!/16"-10000 2(/16"-10000 2!/16"-10000 36"
Style C-FB Style C-FF
Style C-FH
Style C-FG
9
DUAL VALVES
Size &Bore
WorkingPressure
5 BoltFLG Size
RingGasket
Min. CLSpacing
OverallHeight
2!/16 2000 2!/16-5000 BX-20 3#%/64 24
2!/16 3000 2!/16-5000 BX-20 3#%/64 24
2!/16 5000 2!/16-5000 BX-20 3#%/64 24
2(/16 2000 2!/2-5000 RX-210 4!/2 24
2(/16 3000 2!/2-5000 RX-210 4!/2 24
2(/16 5000 2!/2-5000 RX-210 4!/2 24
End Flanges& Max. W.P. Bores Centerline
SpacingOverallHeight
7!/16-3000 2!/16 x 2!/16 3#%/64 25%/8
7!/16-5000 2!/16 x 2!/16 3#%/64 27&/8
7!/16-10000 2!/16 x 2!/16 3#%/64 28
LowerConnection Bores Center Line
Spacing Style OverallHeight
7!/16"-5000 2!/16" x 2!/16 3#%/64" C-FA 28
7!/16"-5000 2!/16" x 2!/16 3#%/64" C-FB 33
7!/16"-10000 2!/16" x 2!/16 3#%/64" C-FA 30
7!/16"-10000 2!/16" x 2!/16 3#%/64" C-FB 35
9"-5000 2(/16" x 2(/16" 4!/2" C-FA 41
9"-5000 2(/16" x 2(/16" 4!/2" C-FB 46
9"-10000 2(/16" x 2(/16" 4!/2" C-FA 43
9"-10000 2(/16" x 2(/16" 4!/2" C-FB 48
11"-5000 3!/8" x 3!/8" 5#/64" C-FA 41
11"-5000 3!/8" x 3!/8" 5#/64" C-FB 47
11"-10000 3!/16" x 3!/16" 5#/64" C-FA 43
11"-10000 3!/16" x 3!/16" 5#/64" C-FB 48
Dual Solid Block Cross Valves
Dual Block Valves
Dual 5 Bolt Flanged Valves
Style C-FBStyle C-FA
10
HYDRAULIC BWH VALVES
Hydraulic OperatedGate Valve
For Drilling and Production Service
Features:1 The hydraulic valve is available with a manual
closing and locking screw.
2 The adjusting nut in the blind cylinder headabsorbs the overload or test pressures appliedto the opening side of the valve, preventing thepressure from reaching the stem.
3 The cylinder head to allow the piston to coverthe exhaust port before the end of the stroke.This arrangement provides enough damping toprotect the valve from shock loading.
4 The overload or test pressures applied to theclosing side of the cylinder are absorbed by thepiston bottoming out against the packing glandof the stem.
5 The tail rod and the operating stem havebackseating shoulders to allow changing thestem packing while the valve is under pressure.
6 Cylinder-operated valves have a special bodycontaining a stuffing box through which a tail rodpasses from the gate. The tail rod serves thefollowing purposes:
❑ Acts as a pressure balance for the stemwhich connects the gate to the operatingpiston.
❑ Compensates for the volume displaced bythe operating stem.
11
HYDRAULIC BWH VALVES
Size &WorkingPressure
A B C D
1!#/16"-10000 18!/4" 14!/4" 35#/8" 18"1!#/16"-15000 18" 14!/4" 35#/8" 18"
2!/16"-5000 14%/8" 14!/2" 35#/8" 14"
2!/16"-10000 20!/2 " 14!/2" 35#/8" 18"
2!/16"-15000 19" 14!/2" 35#/8" 18"
2(/16"-5000 16%/8" 15!%/16" 37&/8" 14"
2(/16"-10000 22!/4" 15!%/16" 37&/8" 18"2(/16"-15000 21" 15!/2" 42!/2" 18"
3!/8"-5000 18%/8" 17!/4" 40#/8" 18"
3!/16"-10000 24#/8" 17!/4" 41#/4" 24"
3!/16"-15000 23(/16" 20%/8" 50!/8" 18"
4!/16"-5000 21%/8" 19#/4" 44&/8" 18"
4!/16"-10000 26#/8" 19#/4" 48&/8" 24"
7!/16"-2000* 22!/8 " 25&/8" 58!/16" 18"
7!/16"-3000* 24!/8 " 25&/8" 58#/16" 18"
7!/16"-5000* 28" 25&/8" 58#/16" 24"
Dimensional DataHydraulic Operated Valve
Assembly Part Numbers for TypeBWH Hydraulic Operated Gate Valves
1Restricted Bore 6!/8" I.D.
A
B
C
D
Size andPressureRating
Flanged Ends
T-2 Trim w/Standard
Ring Grooves
1!#/16"-10000 5662001!#/16"-15000 5660752!/16"-5000 5656002!/16"-10000 5658002!/16"-15000 5659502(/16"-5000 5656502(/16"-10000 5658502(/16"-15000 5660003!/8"-3000 5654503!/8"-5000 565700
3!/16"-10000 5658403!/16"-15000 5652154!/16"-3000 5655004!/16"-5000 5645004!/16"-10000 5645507!/16"-20001 5661507!/16"-30001 5655507!/16"-50001 565750
12
PART NUMBERS FOR HYDRAULIC OPERATED TYPEBWH GATE VALVES
Part Qty 1!#/16"10M
1!#/16"15M
2!/16"5M
3. Protector & indicator 1 565625 565625 5656254. Body Bushing 2 564868 564868 5642225. Seat Ring 2 564862 564862 5642166. Gate 1 566208 566208 5656087. Bonnet 1 564857 565102 5642118. Stem Extension 1 565626 565626 5656269. Headf, Lower Cylinder 1 564533 564533 56453310. Packing Gland 1 564519 564519 56451911. Cylinder 1 565628 565628 56562812. Piston 1 564527 564527 56452713. Head Bld. Cylinder 1 564530 564530 56453014. Adjusting Nut 1 566228 566228 56622815. Centering Pin 1 564532 564532 56453216. Locking Screw 1 566229 566229 56622917. Handwheel 1 564251 564201 56420118. StemGate 1 565607 565607 56560719. Bonnet Gasket 1 564858 564858 56421220. Retainer Plate 2 564861 564861 56421521. Stem Packing 2 564208 564208 56420822. Stem Pin 1 564518 564518 56451823. Seal Ring, Body 2 564867 564867 56422124. Seal Ring, Seat 2 564863 564863 56421725. Alignment Pin 2 N/A N/A 05009026. Bolt, Hex. Head 1 010239 010239 01023927. "O" Ring, Packing Gland 1 030071 030071 03007128. "O" Ring, Cylinder 2 030014 030014 03001429. "O" Ring, Stem 2 030058 030058 03005830. "O" Ring, Locking Screw 1 030591 030591 03059131. Pipe Plug 1 066324 066324 06632432. Relief Fitting 1 564542 564542 56454233. Pipe Plug 2 066326 066326 06632634. Set Screw 2 010012 010012 01001235. Set Screw, Centering Pin 1 010015 010015 01001536. Grease Fitting 1 050267 050267 05026737. Injector Plug 1 564226 564226 56422638. Nut, Heavy Hex., (Nylon) 1 564538 564538 56453839. Nut, Bonnet 8, 12* 020003 020010 02000940. Stud, Tap End, Bonnet 8, 12* 564256 565106 56421041. Nut, Heavy Hex., Cylinder 6 020004 020004 02000442. Stud, All Threqad, Cylinder 6 565639 565639 56563943. Gate Guide 2 564869 564869 56422344. Nut, Hex 1 020006 020006 02000645. Check Valve 1 564379 564379 N/A46. Wear Ring 2 070029-1 070029-1 070029-147. Piston Seal 1 070010-5 070010-5 070010-5
17
16
30
36
26 44
14
35
34
38
33
47
11
27
39
719
25
40
32
28
15
6
24
20
43
8
31
21
4
22
23
3
5
4
37
21
9
10
18
29
12
13
4142
45
46
13
PART NUMBERS FOR HYDRAULIC OPERATED TYPEBWH GATE VALVES
2!/16"10M
2!/16"15M
2(/16"5M
2(/16"10M
2(/16"15M
3!/8"5M
3!/16"10M
3!/16"15M
4!/16"5M
4!/16"10M
7!/16"2M1
7!/16"3M1
7!/16"5M1
565625 565625 565675 565675 566006 565725 565725 565218 564525 564574 565575 565575 565575564222 564222 564768 564768 565206 564268 564413 565252 564318 564463 564618 564618 564618564216 564216 564762 564762 565207 564262 564262 565261 564312 564468 564612 564612 564612565608 565608 565658 565658 566009 565708 565708 565219 564508 564558 565558 565558 565558564357 565152 564757 564807 565202 564257 564407 565258 564307 564457 564607 564657 564707565626 565626 565676 565676 566007 565726 565726 565220 564526 564575 565576 565576 565576564533 564533 564533 564533 564582 564533 565913 565221 564533 564582 564582 564582 564582564519 564519 564519 564519 564568 564519 565916 565222 564519 564568 564568 564568 564568565628 565628 565678 565678 566013 565728 565728 564577 564528 564577 565578 565578 565578564527 564527 564527 564527 564576 564527 564527 564576 564527 564576 564576 564576 564576564530 564530 564530 564530 564579 564530 564530 564579 564530 564579 564579 564579 564579566228 566228 565729 565729 564578 565729 565729 565223 564529 564578 565598 565598 565598564532 564532 564532 564532 564581 564532 564532 564581 564532 564581 564581 564581 564581566229 566229 565731 565731 564531 565731 565731 564531 564531 564531 565580 565580 565580564251 564251 564201 564251 564251 564251 564401 564401 564251 564401 564251 564251 564401565607 565607 565657 565657 566011 565707 565914 565224 564507 564557 565557 565557 565557564358 564358 564758 564808 565208 564258 564409 565253 564308 564459 564608 564608 564608564215 564215 564761 564761 566020 564261 564261 565259 564311 564472 564611 564611 564611564208 564208 564208 564208 564454 564208 564208 565316 564208 564454 564454 564454 564454564518 564518 564518 564518 050045 564518 564518 566103 564518 050045 564567 564567 564567564221 564221 564767 564767 565210 564267 564267 565254 564317 564317 564617 564617 564617564217 564217 564763 564763 565209 564263 564263 565255 564313 564313 564613 564613 564613
N/A N/A 050090 N/A N/A 050460 N/A N/A 050460 N/A 050460 050460 050460010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239030071 030071 030071 030071 030000 030071 030071 030016 030071 030000 030000 030000 030000030014 030014 030014 030014 030088 030014 030014 030088 030014 030088 030088 030088 030088030058 030058 030058 030058 030061 030058 030058 030061 030058 030061 030061 030061 030061030591 030591 030591 030591 030591 030591 030591 030591 030591 030591 030591 030591 030591066324 066324 066324 066324 066324 066324 066324 066324 066324 066324 066324 066324 066324564542 564542 564542 564542 564542 564542 564542 564542 564542 564542 564542 564542 564542066326 066326 066326 066326 066326 066326 066326 066326 066326 066326 066326 066326 066326010012 010012 010012 010012 010012 010012 010012 010012 010012 010012 010012 010012 010012010015 010015 010015 010015 010015 010015 010015 010015 010015 010015 010015 010015 010015050267 050267 050267 050267 050267 050267 050267 050267 050267 050267 050267 050267 050267564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226564538 564538 564538 564538 564587 564538 564538 564587 564538 564587 564587 564587 564587020003 020010 020001 020010 020003 020003 020011 565268 020010 020012 020001* 020003* 020011*564356 565153 564756 564806 565211 564256 564406 565271 564306 564456 564606* 564356* 564706*020004 020004 020004 020004 020001 020004 020004 020001 020004 020001 020001 020001 020001565639 565639 565689 565689 566014 565740 565740 565225 564540 564589 565589 565589 565589564223 564223 564769 564769 565212 564269 564414 565251 564319 564464 564619 564619 564619020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006564379 564379 N/A 564379 564379 N/A 564379 564379 N/A 564379 N/A N/A N/A070029-1 070029-1 070029-1 070029-1 070029-1 070029-1 070029-1 070029-1 070029-1 070029-2 070029-2 070029-2 070029-2070010-5 070010-5 070010-5 070010-5 070010-4 070010-5 070010-5 070010-4 070010-5 070010-4 070010-4 070010-4 070010-4
Part Numbers by Pressures and Sizes
14
SURFACE SAFETY VALVES
The SSV is an automatic wellhead valve whichshuts off the flowstream upon loss of supplypressure. To perform this function, according to14-D, and API specifications, the SSV must beassembled as the second valve in the wellheadflowstream.
15
FULL BORE DIVERTER VALVES
Full Bore Diverter ValveSince the early days of offshore drilling,
contractors have used almost every type ofvalve for diverter service. This included ballvalves, butterfly valves, and etc. Some haveused large bore ANSI pipeline valves. None ofthese valves have proven successful.
Control Flow now introduces a valvedesigned for diverter service. This valve designis field proven in mud and pressure controlapplications.
The valve has API diameter full bores. Sizesavailable are 9", 11" and 13 5/8" API flangedends at working pressures to 3000 PSI.
Full Bore Diverter Valves are available ashandwheel operated or hydraulic operated.
Diverter ValveFull Bore Diverter Valves
3000 PSI Working Prressure
Size & Bore 9" 11" 13%/8"
A 35 37 42
B 30 32 37
C 22 24 29
D 30 30 30
API Ring R-49 R-53 R-57
A
B
C
D
16
3!/16" 10,000 PSI WP TYPE DWSUB-SEA FAIL SAFE VALVES
Item Description Qty* Part Number
1 STEM PROTECTER 1 565352
2 GATE 1 565354
3 STEM EXTENSION 1 565726
4 BONNET GASKET 1 564409
5 GATE GUIDE 2 564414
6 RETAINER PLATE 2 564261
7 BODY BUSHING 2 564413
8 SEAT RING 2 564262
9 SEAL-BODYBUSHING
2 564267
10 SEAL-SEAT RING 2 564263
11 STEM PACKING 3 564208
12 BACK UP RING 3 070028-02
13 BONNET STUD 8 564706
14 BONNET NUT 8 02001
15 SPRING PIN 2 070027-01
16 O-RING 2 030583
17 O-RING 2 030591
18 BONNET 1 565353
19 PIPE PLUG 1 066326
20 RETAINING RING 2 070012-2
21 HEAD 1 565357
22 O-RING 3 070021-1
23 CAP SCREW 1 565367
24 PISTON 1 565370
25 STEM 1 565356
26 SPRING CARTRIDGEASSY
1 565371
27 S.H. PIPE PLUG 3 065001
28 CYLINDER 1 565355
29 LOAD RING 1 565362
30 RETAINING RING 1 070012-4
31 RELIEF VALVE 1 564542
32 SEAL RING 1 565373
33 SLEEVE 1 565363
34 CHECK VALVE 1 564379
35 GREASE FITTING 1 564226
19
20
22
24
26
27
28
20
22
29
31
18
17
32
16
30
35
33
14
9 5 6 15 2
7 10 8
3
4
13
11
12
1
16
17
34
11
1112
25
23
21
17
3!/16" 15,000 PSI WP TYPE DWSUB-SEA FAIL SAFE VALVES
Item Description Qty* Part Number
1 STEM PROTECTER 1 565388
2 GATE 1 565387
3 STEM EXTENSION 1 565385
4 BONNET GASKET 1 565253
5 GATE GUIDE 2 565251
6 RETAINER PLATE 2 565364
7 BODY BUSHING 2 565252
8 SEAT RING 2 565261
9SEAL-BODYBUSHING 2 565254
10 SEAL-SEAT RING 2 565255
11 STEM PACKING 2 565401
12 BACK UP RING 1 070028-3
13 BONNET STUD 16 565271
14 BONNET CAP NUT 16 565383
15 SPRING PIN 2 070027-2
16 BONNET 1 565393
17 PIPE PLUG 2 066326
18 RETAINING RING 1 070012-12
19 HEAD 1 565391
20 O-RING 3 030098
21 PISTON 1 565395
22 STEM 1 565396
23SPRING CARTRIDGEASSY 1 565374
24 S.H. PIPE PLUG 3 010012
25 CYLINDER 1 565392
26 PACKING RETAINERSLEEVE
1 565398
27 RELIEF VALVE 1 564542
28 0-RING 1 030067
29 CHECK VALVE 1 564379
30 GREASE FITTING 1 564226
31 BACK UP RING 1 565365
32 BACK UP RING 4 070007-4
33 BACK UP RING 2 070007-5
17
19
21
22
23
24
25
20
32
2833
27
16
12
31
26
18
29
30
14
9 5 6 15 2
7 10 8
3
4
13
11
12
1
18
TYPE DW SUB-SEA FAIL SAFE VALVES
SizeEnd
Connection A B C D E
3!/16"-10000 Flange 20#/4" 20 15&/16" 15&/16" 25#/4"
Hub 16#/8" 17#/4" 13#/16" 13#/16" 26
Studded 10#/4" 15 10&/16" 10&/16" 21!/8"
3!/16"-15000 Flange 23(/16" 26 20 16 1#/8"
Hub 19#/8" 23!/4" 17!/4" 16!/2" 31!/4"
13#/8" 20!/4" 14!/4" 14!/8" 28!/4"
ED
B
A
Dual Target TypeSingle Target Type
Tee Type Dual
Straight
Dimensional Data for Type ‘DW’ Sub Sea Fail Safe Valve
19
TYPE DW-10 SUBSEA VALVE
The Control Flow DW-10 gate valve is acompact design especially suited for the harshservice requirements of subsea choke and killlines in water depths up to 13,000 feet. DW-10valves are available in a variety of sizes, trims,and pressure ranges up to 15,000 psi. The DW-10 features a balanced stem design whichprevents fluid displacement in the valve bodyduring opening and closing along with bi-directional sealing. These features prevent thevalve from opening when line pressure is lessthan sea pressure, and allow several valves tobe placed together in the same block or linewithout the possibility of pressure lock betweenthe valves. As with all Control Flow slab stylegate valves, metal to metal sealing ensuresreliability under extreme conditions and seatsare especially designed to prevent bodyerosion.
The DW-10 valve is easily maintained andfeatures a detachable actuator completelyseparate from the valve body, bonnet, stem, andpacking thereby maintaining the integrity of thevalve even with the actuator removed. Typicallythe operating pressure of the actuator cylinderis 1500 psi, however a maximum pressurerating of 3000 psi can be applied under certaincircumstances. All DW-10 subsea valves can beeasily converted to an R.O.V. override.
20
TYPE BR, 7!/16" 5/10,000 HYDRAULICGATE VALVES, FLANGED OR STUDDED
ItemNo. Part Qty. 7!/16" 5M 7!/16" 10M
1 Body 1 565157 5649012 Body Extension 1 565158 5649143 Stem Protector/Indicator 1 565159 5649154 Body Bushing 2 564906 5649065 Seat Ring 2 564907 5649076 Gate 1 565162 5649057 Bonnet 1 565163 5649028 Stem Extension 1 565164 5649169 Lower Cylinder Head 1 565165 56491710 Packing Gland 1 565166 56491811 Cylinder 1 565167 56491912 Piston 1 565168 56492013 Blind CylinderHead 1 565169 56492114 Adjusting Nut 1 565170 56492215 Locking Screw 1 565171 56492416 Handwheel 1 565172 56492517 Stem 1 565173 56492618 Ring Gasket, Bonnet 1 564927 56492719 Retainer Plate 2 564928 56492820 Stem Packing 2 565316 56493721 Stem Pin 1 566103 070019
22 Seal Ring, Body Bushing &Seat 4 564929 564929
23 Seal Ring, Seat 2 564930 56493024 O-Ring, Cylinder 2 030040 03010025 O-Ring, Packing Gland 1 030610 03001926 O-Ring Stem 2 030065 03002327 O-Ring, Adjustintg Nut 1 030067 03002328 Gate Guide 2 565160 56493329 Centering Pin 1 565161 56494030 Pipe Plug 1 066324 06632431 Relief Fitting 1 564542 56454232 Pipe Plug 2 066326 06632633 Set Screw 2 010012 01001234 Hex Bolt 1 010239 07001635 Hex Nut 1 020006 02000636 Grease Fitting 1 050267 05026737 Injector Plug 1 564226 56422638 Hex Nut 12 020000 02001439 Stud 12 565174 56493440 Nut 6 020001 02001041 Stud 6 565175 56493242 Hex Nut 1 020106 02010643 Set Screw, Hex, Cup Point 1 010015 01001244 Nameplate 1 564220 56422045 Rivet 4 010658 01065846 Half Coupling 2 564547 07001547 Thrust Bearing 1 N/A 56493848 Race Bearing 2 N/A 56493949 Check Valve 1 N/A 56437950 Wear Ring 2 49223-11 49223-951 Lip Seal 2 070018-4 070018-3
33
13
46
24
11
17
10
25
31
20
18
1
5
4
6
19
28
16
15
42
12
26
9
39
37
7
38
30
8
23
27
36
2
3
48 2947
40 4114
3534
50
22
21
TYPE BR, 7!/16" 5/10,000 MANUAL GATE VALVES
ItemNo. Part Qty 7!/16" 5M 7!/16" 10M
1 Body 1 565157 564901-32 Bonnet 1 565163 5649023 Packing Gland 1 565182 5649764 Bearing Cap 1 565183 5649775 Stem Adapter 1 565305 5649816 Stem 1 565184 5649787 Retainer Plate 2 564928 5649288 Gate 1 565185 5649809 Body Bushing 2 564906 56490610 Seat Ring 2 564907 56490711 Stem Pin 1 565311 56498212 Bonnet Gasket 1 564927 56492713 Seal Ring, Seat 2 564930 56493014 Seal Ring, Body Bushing 4 564929 56492915 O-Ring, Bearing Cap 1 030362 03037116 Grease Fitting 2 564225 56422517 O-Ring, Stem Adapter 1 030072 03001618 Handwheel 1 565172 56498419 Tap End Stud 12 565174 56493420 Hvy. Hex Nut 12 020000 02001421 Stem Packing 2 565316 56493722 Injector Plug 1 564226 56422623 Hex Head Bolt 1 010242 07001624 Gate Guide 2 565160 56493325 Thrust Bearing 2 565318 070017-226 Bearing, Race 4 565319 070013-327 Hex Nut 1 020006 02000628 Nameplate 1 564220 56422029 Rivet 4 010658 01065830 Check Valve 1 N/A 56437931 Protector/Indicator, Stem 1 N/A 56491532 Extension, Stem 1 N/A 56497933 Pipe Plug, Hex, HD. 1 N/A 06632434 Screw, Anti-Rotation 1 N/A 56490835 Body Extension 1 N/A 564914
Size & Pressure (psi) A AA B C D E F
7!/16"-5000Hyd./Man. Flanged 33 33 30%/8" 28 30 32 68!/2"
7!/16"-5000Hyd./Man. Studded 25 25 30%/8" 28 30 32 68!/2"
7!/16"-10000Hyd./Man. Flanged 34 34 32 34 30 32 68!/2"
7!/16"-10000Hyd./Man. Studded 25 25 32 34 30 32 68!/2"
7!/16"-15000Hyd./Studded 23 25 35&/8" 17!!/16" 30 34(/16" 69!/8"
27
17
5
16
3
23
19 20
2
12
1
9
14
10
7
24
35
4
18
15
21
8
13
6
31
25 26
30 22
11
32
33
A
B
C
D
B
C
A
D
22
TYPE BR, 7!/16" 15,000 HYDRAULIC GATE VALVES
15
36
12
49
45
11
16
38
37
29
18
6
1
28
14
23
13
48
27
26
52
31
19
7
17
22
21
4
5
8
2
30
39
50 51
46 47
34 3533
24 259
3
10
ItemNo. Part Qty.
7!/16" 15M(Studdedw/Ports)
1 Body 1 5651102 Body Extension 1 5651163 Stem Protector/Indicator 1 5651174 Body Bushing 2 5651185 Seat Ring 2 5651196 Gate 1 5651127 Bonnet 1 5651118 Stem Extension 1 5651149 Packing Gland 1 565120
10 Cylinder 1 56512111 Piston 1 56511512 Blind CylinderHead 1 56512213 Adjusting Nut 1 56512314 Locking Screw 1 56512415 Handwheel 1 56592516 Stem 1 56512617 Ring Gasket, Bonnet 1 05090918 Retainer Plate 2 56512719 Stem Packing 2 56511320 Stem Pin 1 56512821 Seal Ring, Body Bushing 2 56512922 Seal Ring, Seat 2 56513023 O-Ring, Adjusting Nut 1 03002324 O-Ring, Stem 2 03007225 O-Ring, Packing Gland 1 03007726 Cup Seal 2 070018 -127 Wear Ring 2 56513228 Pipe Plug 2 06632729 Gland 1 56414830 Plug 1 56414931 Relief Fitting 1 56454232 Set Screw 2 01001233 Thrust Bearing 2 070017-134 Thrust Washer 1 070013-135 Thrust Washer 1 070013-236 Grease Fitting 1 05026737 Grease Fitting 1 07001438 Cap Nut 16 56513339 Stud, T.E. 16 56513440 Hex Nut 8 02001041 Stud, A.T. 8 01404642 Gate Guide 2 56513143 Nameplate 1 56422044 Rivet 4 01065845 Half Coupling 1 07001546 Hex Nut 1 02000647 Hex Bolt 1 07001648 Bearing Retainer 1 56513549 Piston Locknut 1 56513650 A.T. Studs 32 01041851 Hex Nut 32 02000052 O-Ring, Cylinder 2 030639
23
The Better Check Valve For In-Line Flow Control
Control Flow offers an in-line check valve thatprovides maximum flow, low turbulence,reduced slam, positive shutoff, and long life withminimum maintenance. A durable, spring-loaded check valve which seals effectivelyagainst back pressure in the line, but readilyopens to normal pump or flow pressures.
The name is FloGuard
Exceptional Design FeaturesAssure Dependable,Economical Operation
Each FloGuard valve utilizes an unthreaded,field-replaceable seat and Control Flow'sexclusive inside blowout preventer design for itssealing poppet. This simple, yet reliable, sealingsystem has been field-proved for many years inthe most demanding drilling environments.
FloGuard in-line check valves come in 2"through 8" sizes and working pressures up the5,000 psi with a wide choice of body trims andend connections. The body, seat and poppet aremanufactured from solid alloy steel, resulting inadded strength and longer valve life thancompetitive cast valves.
FLOGUARD CHECK VALVES
24
FLOCHECK
FloCheck™ is a one-way drop type check valveespecially designed to help you save onmaintenance and valve replacement costs. It is fullyrepairable in-line and features an exclusive seatdesign that virtually eliminates wear on the valvebody. NOTE: The seat can be resurfaced if wear isnot excessive.
Each FloCheck™ valve is carefullymanufactured, inspected and tested to ensure long,trouble-free service in the most demandingenvironmental conditions. All valve sizes have face-to-face dimensions identical to API gate valves andAPI flanged end connections are standard. Buttweld,clamped and studded end connections are providedon request. Spare parts, including all seals, areavailable from stock. And, since FloCheckincorporates the same poppet design used in manypopular mud pumps, spares are available worldwidethrough numerous supply stores.
Item Part Qty. 2!/16" 5M 2!/16" 10M 2!/16" 15M 2(/16" 5M 2(/16" 10M 2(/16" 15M 3!/8" 5M 3!/16" 10M 3!/16" 15M 4!/16" 5M 4!/16" 10M 4!/16" 15M
1 Assembly 1 560310 560325 560340 560579 560577 560575 560355 560370 560385 560405 560420 5604352 Body 1 560450 560452 560464 560580 560578 560576 560471 560478 560485 560492 562499 5605063 Bonnet 1 560513 560514 560515 560573 560516 560582 560516 560517 560518 560519 560520 5605214 Seat 1 560523 560525 560527 560574 560528 560528 560528 560530 560532 560534 560536 5605385 End Cover 1 560570 560571 560572 560570 560581 560581 560540 560541 560542 560543 560544 560545
6 Valve (Poppet) 1 560546 560546 560546 560546 560549 560549 560549 560549 560549 560552 560552 5605527 Spring 1 560555 560555 560555 560555 560556 560556 560556 560557 560558 560559 560559 5605598 Cap Screw 4 010725 010752 N/A 010725 N/A N/A N/A N/A N/A N/A N/A N/A9 Seal, Bonnet 1 030606 560583 N/A 030606 560583 560583 030613 560590 N/A 030626 N/A N/A
2 N/A N/A 560565 N/A N/A N/A N/A N/A 560566 N/A 560564 56056410 Seal, Seat 1 030592 030118 N/A 030592 N/A N/A N/A N/A N/A 030684 N/A N/A
2 030604 560565 N/A 030604 N/A N/A N/A N/A N/A 030852 N/A N/A3 N/A N/A 560565 N/A 560584 560584 030672 560584 560566 N/A 030702 560564
11 Stud 8 011001 011042 N/A 011001 N/A N/A N/A N/A N/A N/A N/A N/A
12 N/A N/A N/A N/A 011040 N/A 560567 N/A N/A N/A N/A N/A16 N/A N/A 011004 N/A N/A 011040 N/A 011007 011041 011040 011010 011014
12 Nut 8 020004 020001 N/A 020004 N/A N/A N/A N/A N/A N/A N/A N/A12 N/A N/a N/A N/A 020003 N/A 020003 N/A N/A N/A N/A N/A
16 N/A N/A 020009 N/A N/A 020003 N/A 020001 020003 020003 020003 02001113 Plug, Bonnet 1 066326 066326 564149 066326 066326 066326 066326 066326 564149 066326 066326 066326
14Gland,Autoclave 1 N/A N/A 564148 N/A N/A 564148 N/A N/A 564148 N/A N/A N/A
15Screw, SeatRetainer
2 010630 0106331 N/A 010630 010663 010663 010663 010663 010699 010663 010697 010697
16Back-Up Ring(Seat)
3 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 560589 N/A
End Cover
Valve (Poppet)
Spring
Seal, Bonnet
Bonnet
Nut
Stud
Plug, Bonnet
Seat
Seal, Seat
Body
TABLE OF CONTENTS
1
MW Handwheel Operated Gate Valves ................................................. 2
Assembly Part Numbers for Type MW Gate Valves.......................... 4 - 6
Component Part Numbers for Type MW Gate Valves ........................... 7
Operating Recommendations ............................................................... 7
Type MW Gate Valves Specifications ............................................... 8 - 9
45 & 90 Degree Ells ............................................................................ 10
90 Degree Dual Fluid Cushion Ell ....................................................... 10
Target Flanges .................................................................................... 10
Goosenecks ........................................................................................ 11
Long Sweep Tees, Ells & Crosses....................................................... 11
Standpipe Mud Manifold...................................................................... 12
Notes ................................................................................................... 13
“MW” HANDWHEEL OPERATEDGATE VALVES
Flanged “MW” Gate Valve
Buttweld “MW” Gate Valve
Hubbed “MW” Gate Valve
2
“MW” HANDWHEEL OPERATED GATE VALVES
1. Hard-faced, alloy steel gate. The gate’s tung-sten carbide facing has a high resistance towear and corrosion. It also reduces frictionbetween the gate and seats, so less effort isrequired to open and close the valve.
2. Tungsten carbide hard-faced stainless steelseats. These seats also are highly resistantto wear and corrosion, with longer life expect-ancy than seats made of other materials.
3. Holds pressure from either direction. Line pres-sure forces the gate against the downstreamseat for a positive seal from either side. There-fore, the valve can be mounted facing eitherway in your line.
4. Venting prevents valve damage. The body cav-ity is vented to the valve’s upstream side.Since there is no danger of a pressure lock...no chance of trapped fluids damaging thevalve due to heat expansion.
5. Stress on the stem is minimal. Once the gateis closed, no further tightening or wedging isrequired for a positive seal. This reduces thehazard of stress corrosion cracking the stem.
6. Alloy steel valve body, bonnet and internal com-ponents are heat-treated to NACE specifications.The alloy steel body is produced from a weld-able grade of steel for butt-welding in line andmeets API requirements for flanged andhubbed connections.
7. Easy opening and closing. The combination ofhard facing on the gate and seat, Teflon® lin-ing in the stem seals and needle thrust bear-ings reduces the effort required to turn thehandwheel.
8. Lip-type stem packing I.D. is Teflon® lined. Re-ducing friction between the packing and stemduring valve opening and closing prolongspacking life.
9. The gate and seats can be replaced without re-moving the valve body from the line. They donot require a selective fit and no special toolsare needed.
10. All bonnet seals are metal RX-type ring gaskets.
11. Selection. Flocon’s Type “MW” mud valves areavailable in pressure ratings to 10,000 psi inflanged or hubbed configurations and 7,500 psifor butt-weld configuration. High temperaturemodels are available. For details contact theControl Flow office near you.
The “MW” mud valve has been developed for severe service mud and gas manifolds. By applying thenewest technology in the most critical area, the sealing surfaces of the gate, seat, and stem, Floconengineers have gained advantages over other mud valve designs.
The new “MW” mud valve provides dependablemetal to metal sealing, long life, corrosionresistance and low torque operation.
3
4
Assembly Part Numbers
MANUAL TYPE “MW” GATE VALVES
Size & Pressure Part Rating Number 2!/16"-5,000 804086 2!/16"-10,000 804090 3!/8"-5,000 804087 3!/16"-10,000 804091 4!/16"-5,000 804088 4!/16"-10,000 804092 5!/8"-5,000 804089 5!/8"-10,000 804093
"MW" Hubbed Gate Valves
5
Assembly Part Numbers
MANUAL TYPE “MW” GATE VALVES
Size & Pressure Bore Weld Part
Rating Size Preps. Number 2" NOM.-7,500 1.500" 2" XXH 804073 2" NOM.-7,500 2.300" 3" XXH 804001 3" NOM.-7,500 3.152" 4" XXH 804011 4" NOM.-7,500 4.063" 5" XXH 804021 5" NOM.-7,500 5.187" 6" SCH 160 804040
"MW" Buttweld Gate Valves
MANUAL TYPE “MW” GATE VALVES
6
Size & Pressure Part Rating Number 2!/16"-5,000 804077 2!/16"-10,000 804081 3!/8"-5,000 804078 3!/16"-10,000 804082 4!/16"-5,000 804079 4!/16"-10,000 804083 5!/8"-5,000 804080 5!/8"-10,000 804084
"MW" Flanged Gate Valves
Assembly Part Numbers
ASSEMBLY PART NUMBERS FOR TYPE “MW”HANDWHEEL OPERATED GATE VALVES
7
Operating Recommendations
Overtightening the type MW Gate Valve does not assist in affecting a seal.Jamming the gate may prevent the valve from sealing.
Recommended operating procedure is:
1. Opening the valve:Turn the handwheel counter-clockwise until the gate shoulders, then clockwise one quarter turn.
2. Closing the valve:Turn the handwheel clockwise until the gate shoulders in the bottom, then counter-clockwiseone quarter turn.
Part Numbers by Nominal Sizes, All PressuresPart Qty 2" 3" 4" 5" 2. Gate 1 804003 804013 804024 804044 3. Seat 2 804004 804014 804023 804045 4. Stem 1 804005 804015 804026 804046 5. Bonnet 1 804006 804016 804025 804043 6. Bearing Cap 1 804007 804007 804017 804017 7. Stem Nut 1 804008 804008 804008 804008 8. Stem Protector 1 804032 804019 804028 804047 9. Handwheel 1 804009 804029 804029 80402910. Stem Stop 1 804030 804030 804030 80403011. Packing Ring 1 804031 804031 804031 80404812. Packing Gland 1 804027 804027 804027 80402713. Ring Gasket 1 050608 050610 050612 05061414. Seat Seal 2 070659 070658 070657 07066715. Poly-Pak 1 070663 070663 070663 07066316. Modular Bearing 1 070663-8 070663-8 070663-8 070663-817. Stud, Tap End 8 011008 011012 941066 01059918. Hex Nut, Bonnet 8 020001 020010 020011 02001119. Flat Head Cap Screw 1 070419 070419 070419 07041920. Grease Seal 1 070660 070660 070660 07066021. Bearing Race 4 565319 565319 565319 56531922. Thrust Bearing 2 565318 565318 565318 56531823. Grease Fitting 1 564225 564225 050267 05026724. Injection Plug 1 564226 564226 564226 56422625. Socket Head Cap Screw 4 N/A N/A 010713 070668
TYPE “MW” GATE VALVES
8
Type “MW” Gate Valve For Drilling and Production ServiceDimensional Data & Specifications
*All Hubbed Connections use the BX Ring Groove Sizes listed under 10,000 psi.Dimensions are as short as possible for tighter configurations, they are not per API.
Handwheel Information
2" 3" 4" 5"
(A) End to End 10.00 14.00 16.00 18.00(B) CL to Bottom 2.81 3.63 5.00 5.50(C) CL to Handwheel 21.17 25.87 27.62 30.06(D) CL to Top of Valve 18.75 21.43 24.18 27.62
Width 9.25 11.50 12.50 14.75
Buttweld "MW" Gate Valves7,500 psiWorking Pressure
Nominal Size
2!/16" 3!/8" / 3!/16" 4!/16" 5!/8"
(A) End to End 16.50 20.00 23.00 26.00(C) CL to Handwheel 21.17 25.87 27.62 30.06(D) CL to Top of Valve 18.75 21.43 24.18 27.62
Width 9.25 11.50 12.50 14.75API Ring Groove Size* (5,000) R-24 R-35 R-39 R-44 (10,000) BX-152 BX-154 BX-155 BX-169
Size
Flanged & Hubbed "MW" Gate Valve Dimensions5,000 & 10,000 psiWorking Pressure
NominalSize
# of Turns to Open Gate
Handwheel O.D.
2" 11.80 12.053" 15.80 15.844" 20.50 15.845" 24.30 15.84
VALVE SPECIFICATIONS
9
Lubrication Charts
Service TrimCode Body 1, 3 Bonnet 1, 3 Bonnet
Seal Gate2 Seat2 Stem
Notes:1 Controlled Hardness is 235 BHN Max.2 Tungsten Carbide Hardface3 Charpy V-Notch test per API required for any trim at low temperature service
Oil & GasH2S per NACE MR-01-75
Oil & GasGeneral Service
T-1
T-2
410 S.S.or 17-4PH
17-4PH
17-4PH
17-4PH
17-4PH
17-4PH
17-4PH
316 S.S.
316 S.S.
316 S.S. 410 S.S.or 17-4PH
Standard Materials Used In Type "MW" Gate Valves
17-4PHAPI 75K410 S.S.
API 75K410 S.S.
API 75KAlloy Steel
API 75KAlloy Steel
API 75KAlloy Steel
API 75KAlloy Steel
Oil & GasH2S & CO2
T-3
CF #1 CF #3 CF Artic 70Standard Crude E G ELow Temp. to -70°F P F EHigh Temp. to 650°F P E PH2S (Sour Gas) G F FCO2 G F FDiesel E P PGas Well Condensates G F F
E-Excellent G-Good F-Fair P-Poor
Lubrication NameOperational Properties
Lubrication
Type 10 LB 40 LB 100 LB 400 LB
CF #1 564241-1 564241-2 564241-3 564241-4CF #2 564441-1 564441-2 564441-3 564441-4
CF Artic 70 564641-1 564641-2 564641-3 564641-4
Pail Drum
MANIFOLD COMPONENTS
90 Degree Dual Fluid Cushion Ell*
Lead Filled Target Flange
90 Degree Fluid Cushion Ell* 45 Degree Fluid Cushion Ell*
10
Target Flange Fluid Cushion
MANIFOLD COMPONENTS
160 Degree Gooseneck with Top Outlet* 160 Degree Long Radius Gooseneck*
Long Sweep Cross* Long Sweep Ell* Long Sweep Tee*
11Consult Control Flow, Inc. for specific dimensions on other pipe sizes & pressure ratings.
*Also available in flanged and hubbed end connections.
Standard Sizes for all Control FlowElls, Target Flanges, Goosenecks,
Long Sweep Ells, Long Sweep Tees & Long Sweep Crosses
Size BoreSize
2" NOM. 2.06" 2" XXH 1.5033" NOM. 3.06" 3" XXH 2.3004" NOM. 4.06" 4" XXH 3.1525" NOM. 5.12" 6" SCH 160 5.187
Pipe Size
12
STANDPIPE MUD MANIFOLD
Mud Standpipe Manifold 7,500 & 10,000 psi W.P.With Buttweld “MW” Valves
2
CFI "CLASS U" BLOWOUT PREVENTERSAll Blowout Preventers Conform to API Specification 16A, Latest Edition
Ram Assembly• The following rams are available:• Blind rams • Shear rams• Pipe rams • Dual pipe rams
Piston Operating• Normal operating pressure is 1,500 psi• Maximum operating pressure is 3,000 psi• Vented area between primary piston shaft seal and operating system
• Forged Body• All BOP's are suited for H
2S service
• Standard temperature rating to 250°F• Certification to UK DEN or Norwegian NPD regulations are available
Fig. 1
• Forged Intermediate Flange Hydraulic connections are 1" N.P.T.• Pressure energized bonnet - Intermediate seal with metal anti-extrusion ring
• Locking Screw Hydraulic ram locking system is available on request
ISO 9001 QUALITY PROGRAMHOUSTON, TEXAS
3
Table 1
Top View Single or Double
NOTE: All dimensions are in inches unless otherwise specified.
A-1 Length, bonnets closed locking screws inA-2 Length, bonnets open, locking screws outA-3 Length, bonnets closed, with wedgelocksA-4 Length, bonnets open with wedgelocksB-1 Height, API flange singleB-2 Height, clamp hub singleC Width, no side outlets
D-1 Center line of side outlet to bottom API flangeD-2 Center line of side outlet to bottom of clamp hubE-1 Height, API flange outletE-2 Height, clamp hub doubleF-1 Center line of upper side outlet to bottom flangeF-2 Center line of upper side outlet to bottom hub
Fig. 2 Side View - Single
A
B
C
D
D
Side View - Double Fig. 3
E
F
D
A
eziS gnikroWerusserP
lacitreV)ni(eroB 1-A 2-A 3-A 4-A 1-B 2-B C 1-D 2-D 1-E 2-E 1-F 2-F
elgniS.xorppAthgieW
)bl(
elbuoD.xorppAthgieW
)bl(
"61/17 0003 60.7 00.47 05.901 - - 60.42 - 52.02 57.8 - 00.14 - 96.52 - 006,2 000,5
"61/17 0005 60.7 00.47 05.901 - - 05.72 91.52 52.02 14.01 52.9 91.44 88.14 90.72 49.52 008,2 002,5
"61/17 00001 60.7 00.47 05.901 - - 65.03 91.52 26.02 60.11 83.9 26.84 52.54 21.92 44.72 055,3 004,6
"61/17 00051 60.7 00.47 05.901 - - 18.13 - 26.02 96.11 - 88.94 - 57.92 - 008,3 057,6
"11 0003 00.11 52.69 88.641 - - 60.92 - 21.02 18.9 - 52.94 - 00.03 - 003,5 009,9
"11 0005 00.11 52.69 88.641 21.011 91.051 13.43 13.92 21.52 44.21 49.9 05.45 05.94 26.23 21.13 006,5 002,01
"11 00001 00.11 52.69 88.641 21.011 91.051 96.53 91.23 57.52 21.31 83.11 88.55 83.25 13.33 65.13 004,6 003,11
"11 00051 00.11 00.421 13.571 05.421 21.761 18.44 88.33 00.23 96.61 22.11 57.96 18.85 26.14 51.63 003,01 004,81
"8/531 0003 26.31 21.211 05.171 96.221 60.661 13.13 - 52.92 13.01 - 83.35 - 86.23 - 002,7 003,41
"8/531 0005 26.31 21.211 05.171 96.221 60.661 18.33 49.13 52.92 65.11 26.01 88.55 00.45 26.33 96.23 007,7 008,41
"8/531 00001 26.31 21.411 57.271 96.421 13.761 96.14 18.23 52.03 21.51 96.01 26.66 57.75 60.04 26.53 003,01 004,81
'8/531 00051 26.31 00.931 83.412 52.251 05.502 96.35 00.24 05.93 83.12 05.51 57.18 21.07 44.94 65.34 007,32 052,34
"4/361 0003 57.61 52.721 65.402 52.741 83.991 60.04 57.13 57.53 13.31 61.9 88.56 65.75 21.93 79.43 007,31 056,62
"4/361 0005 57.61 52.921 21.202 52.941 52.202 60.34 49.43 57.53 18.41 57.01 88.86 57.06 26.04 65.63 057,31 049,62
"4/361 00001 57.61 00.931 83.812 05.551 00.212 96.94 49.14 05.93 83.91 05.51 57.77 00.07 44.74 65.34 003,32 005,34
"4/381 00001 57.81 83.651 21.242 05.661 26.622 00.65 32.34 05.24 05.02 88.31 21.78 00.47 05.15 88.44 009,82 059,65
"4/302 0003 57.02 96.341 18.622 49.361 88.322 65.04 13.33 25.93 13.41 96.01 21.66 88.85 88.93 52.63 056,31 005,52
"4/112 0002 52.12 96.341 18.622 49.361 88.332 91.73 13.33 25.93 26.21 96.01 57.26 88.85 91.83 52.63 052,31 051,52
"4/112 0005 52.12 52.461 05.742 49.081 52.932 49.05 21.64 05.24 49.71 91.71 83.28 00.47 30.94 00.54 000,03 000,85
"4/112 00001 52.12 83.361 83.052 21.481 05.932 00.66 00.35 52.74 35.42 30.81 60.001 60.78 95.85 90.25 056,43 005,56
"4/362 0003 57.62 26.961 83.572 - - 13.84 - 52.64 44.71 - 88.87 - 00.84 - 000,42 002,44
4
Hydraulic Control System of the CFI "Class U" Preventers
CFI "CLASS U" BOP OPERATING CHARACTERISTICSAll Blowout Preventers Conform to API Specification 16A, Latest Edition
Table 2
Ram Closing and Bonnet Opening
Ram Opening and Bonnet Closing
Fig. 4
eziSeroB&
gnikroWerusserP
otsnollaG).S.U(nepO
otsnollaG).S.U(esolC
gnikcoL.oNwercS
snrutfo
gnisolCoitar
gninepOoitar
otsnollaG).S.U(nepO
otsnollaG).S.U(esolC
gnikcoL.oNwercS
snrutfo
gnisolCoitar
gninepOoitar
lla"61/17PW 3.1 3.1 81 1:9.6 1:2.2 - - - - -
"11ispM01,5,3 4.3 5.3 72 1:3.7 1:5.2 4.7 6.7 72 1:0.21 1:8.4
ispM51"11 1.6 2.6 23 1:8.9 1:2.2 9.8 9 23 1:2.51 1:7.3
"8/531ispM01,5,3 4.5 8.5 23 1:0.7 1:3.2 5.01 9.01 23 1:8.01 1:5.4
M51"8/531isp 4.01 6.01 54 1:6.01 1:6.3 61 2.61 54 1:2.61 1:0.6
"4/361ispM5&M3 8.9 6.01 83 1:8.6 1:3.2 1.81 91 83 1:4.01 1:4.4
M01"4/361isp 6.11 4.21 54 1:8.6 1:3.2 2.81 1.91 54 1:4.01 1:4.4
M01"4/381isp 2.12 1.32 45 1:4.7 1:7.3 - - - - -
&"4/302&M2"4/112
ispM39.7 4.8 64 1:0.7 1:3.1 3.41 9.41 64 1:8.01 1:7.1
M5"4/112isp 2.72 9.92 45 1:2.6 1:0.4 - - - - -
M01"4/112isp 5.42 9.62 15 1:2.7 1:0.4 - - - - -
M3"4/362isp 1.01 8.01 85 1:0.7 1:0.1 - - - - -
LARGE BORE SHEAR BONNETS
5
Table 3
PIPE RAMS - SINGLE & DUAL - Fig. 5
Pipe rams for Control Flow's "Class U" BOPs are available to fit a wide variety of tubing, drill pipe, drill collar and casingsizes. All rams are suitable for Sour Service - H
2S - per NACE MR-O1-75 specifications. The CFI "Class U" ram packers are
self-feeding with a large reserve of elastomer to ensure a long-lasting seal under all conditions. Ram packers lock intoplace and cannot be dislodged by the well flow.
Fig. 6
SHEAR RAMS - Fig. 6Control Flow's Shearing Rams shear the pipe in the hole to allow quick sealing in the event of unexpected downhole
pressure or conditions. Shearing capabilities for the CFI "Class U" BOP's vary with the style of rams, bonnets and/orboosters. All styles of Control Flow's Shearing Rams offer the following features:
• 3,000 psi shearing operating pressure
• Single-piece body construction
• Suitable for Sour Service - H2S - per NACE MR-01-75
* Fluorel - Trade mark of 3M** Viton - Trade mark of E.I. DuPont
SELECTED COMPOUNDS FOR THE PETROLEUM INDUSTRY
RAM BLOCKS FOR CFI "CLASS U" BOPSINGLE, DUAL AND SHEAR RAMS
Fig. 5
All sizes of the CFI "Class U"BOP packers are available in a widevariety of elastomer material. Referto the chart for the type of elastomerthat best suits your needs.
dnuopmoCrebmuN remyloP ssendraH detcepxE
egnaR.pmeT ecivreS
9541-7541 elirtiN 09-07 F˚572+ot04- hgiH.tesnoisserpmocwolyreVecivresmuelortepdradnats,erutarepmet
-8591-75919591 elirtiN 09-08-07 F˚572+ot04-
tesnoisserpmocwoLecnatsisernoisarbadooG
ecivresmuelortepytilibapacS2H
9191 elirtiN 09 F˚572+ot02-tnatisiernoisserpmocedevisolpxE
.erusserphgih2OC,ecivressagruoStesnoisserpmocwolyreV
7428 elirtiN 07 F˚523+ot04- teswol,erutarepmethgiH
9593-8593 MPDE 09-08 F˚004+ot56- F˚005+otecivresmaetS
92151-82151 nirdyhoroihcipE 09-08 F˚052+ot06- ytilibapacerutarepmethgih/woldooGstcudorpmuelortepotecnatsiserdooG
92161 *leruolF 09 F˚004+ot02- 84238-R-liMgniteem,rolocneerG9727SMAIIssalCIepyT
70261 *leruolF 57 F˚004+ot02- 84238-R-liMgniteeM,rolocnworB0827SMA,8727SMAIssalC,IepyT
70661 *leruolF 07 F˚005+ot02- 90661,80661fonoisrevretfoS
-90661-8066199661-95961 *leruolF -59-09-08
79 F˚005+ot02-ytilibapacS2H,tnatsisertuowolB
ecivresedurcruoSnoitagnoletrohssah99661
91091 **BnotiV 09 F˚004+ot02- noisserpmocedevisolpxedooGsagerusserphgih,ecnatsiser
88291 **HGnotiV 08 F˚004+ot02- .xaMF˚054otecnatsiseRS2HdnamaetS
90002-80002 salfA 09-08 F˚004+ot02- tnatsisermuelortep,enimA,maetS
6
CFI "CLASS U" BOP PARTSAll Parts Conform to API Specification 16A, Latest Edition
*Only used on 10,000 psi WP Preventers. 11" 15,000 and 13 5/8" 15,000 requires 8 for singles and 16 for doubles.**13 5/8 through 16 3/4" and 20 3/4" through 26 3/4" require 24 for singles and 48 for double.†Please check with Control Flow representative for correct part numbers 13 5/8" 5,000psi Serial No. 6 and below
All Control Flow-built replacement parts for the CFI "Class U" hydraulic preventer meet or exceed the original equipment manufacturer'sspecification and conforms to all applicable API and other industry standards. Replacement procedures are, in all cases, identical to theoriginal equipment manufacturer. Refer to your CFI "Class U" maintenance manual for specific tear-down or assembly instructions.
If the appropriate publication is unavailable to you, call the Control Flow District Office nearest you for assistance in any phase ofparts installation.
REPAIR SERVICESShould you wish to take advantage of Control Flow's economical repair or remanufacturing capabilities, our Houston, Texas and
Moore, Oklahoma facilities are fully equipped and staffed to get your CFI "Class U" preventer, or any other drilling and productionpressure control equipment back in your operation fast.
Table 4
metI.oN emaNtraP
.oNd'qeRelgniS
.oNd'qeRelbuoD
isp000,3-"61/17 isp000,5-"61/17 isp000,01-"61/17 isp000,51-"61/17 isp000,3-"11 000,5-"11isp
1 ydoB 1 1 - - - - - -
2 egnalFetaidemretnI 2 4 30-66203 30-66203 10-66203 10-66203 30-76203 30-76203
3 tennoB 2 4 40-87203 30-87203 20-87203 10-87203 10-86203 20-86203
4 ylbmessAmaR 2 4 )(62244 )(62244 )(62244 )(62244 )(33244 )(-33244
5 gnitarepO,notsiP 2 4 049766 049766 049766 049766 871376 871376
6 gnitarepO,rednilyC 2 4 20-47203 20-47203 20-47203 20-47203 30-47203 30-47203
7 wercSgnikcoLgnisuoH 2 4 10-80303 10-80303 10-80303 20-80303 20-80303 20-80303
8 wercSgnikcoL 2 4 62303 62303 62303 62303 56303 56303
9 nepOegnahCmaR,notsiP 2 4 42303 42303 42303 42303 26303 26303
01 esolCegnahCmaR,notsiP 2 4 52303 52303 52303 52303 36303 36303
11 egnahCmaR,rednilyC 4 8 20-37203 20-37203 20-37203 20-37203 30-37203 30-37203
21 tennoB,tloB 8 61 60-21303 20-21303 70-21303 10-21303 40-21303 40-21303
31 682-AtennoB,tloB 8 61 60-971376 20-971376 70-971376 10-971376 40-971376 40-971376
41 gnisuoHwercSgnikcoL,sdutS 61 23 01-62-3195 01-62-3195 01-62-3195 01-62-3195 01-52-5195 01-52-5195
51 gnisuoHwercSgnikcoL,stuN 61 23 01-11-55921 01-11-55921 01-11-55921 01-11-55921 01-71-55921 01-71-55921
61 citsalP,evlaVkcehC 2 4 10-546086 10-546086 10-546086 10-546086 10-546086 10-546086
71 gnikcaPcitsalP,wercS 2 4 90-0495 90-0495 90-0495 90-0495 90-0495 90-0495
81 gnikcaPcitsalP,gulPepiP 2 4 50-0395 50-0395 50-0395 50-0395 50-03295 50-03295
91 gnizigrenEcitsalP,gniR 2 4 21-68581 21-68581 21-68581 21-68581 31-68581 31-68581
02 gnikcaPcitsalP,gniR 2 4 63-96421 63-96421 63-96421 63-96421 83-96421 83-96421
12 doRgnitcennoC,gniRlaeS *4 *8 73-14711 73-14711 73-14711 73-14711 83-14711 83-14711
22 pUkcaB,gniR 4 8 A/N A/N 12-29712 12-29712 22-29712 22-29712
32 tennoB,laeS 4 4 21-06091 21-06091 21-06091 21-06091 31-06091 31-06091
42 ediuGmaR,niP 4 8 20-31303 20-31303 20-31303 20-31303 30-31303 30-31303
52 rednilyCgnitarepO,gniR-O 2 4 58-31-37-7226 58-31-37-7226 58-31-37-7226 58-31-37-7226 58-31-87-7226 58-31-87-7226
62 egnalF.tnIotdoRnotsiPgnitarepO,gniR-O 2 4 29-29481 29-29481 29-29481 29-29481 19-29481 19-29481
72 notsiPgnitarepO,gniRraeW 2 4 30-32294 30-32294 30-32294 30-32294 20-32294 20-32294
82 doRliaT,gniRlaeS 2 4 23-14711 23-14711 23-14711 23-14711 33-14711 33-14711
92 gnipiW,gniR-O 4 8 07-10-43-7226 07-10-437226 07-10-437226 07-10-437226 07-10-83-7226 07-10-83-7226
03 ydoBotnotsiPegnahCmaR,gniR-O 4 8 37-19481 37-19481 37-19481 37-19481 58-31-92-7226 58-31-92-7226
13 egnalFtnIotdoRnotsiPegnahCmaR,gniR-O 4 8 58-31-23-7226 58-31-23-7226 58-31-23-7226 58-31-23-7226 58-31-43-7226 58-31-43-7226
23 egnalFtnIotlyCegnahCmaR,gniR-O 4 8 58-31-14-7226 58-31-14-7226 58-31-14-7226 58-31-14-7226 58-31-52-32413 58-31-52-32413
33 tennoBotlyCegnahCmaR,gniR-O 4 8 58-31-54-7226 58-31-54-7226 58-31-54-7226 58-31-54-7226 58-31-62-32413 58-31-62-32413
43 notsiPegnahCmaR,gniR-O 4 8 58-31-53-7226 58-31-53-7226 58-31-53-7226 58-31-53-7226 58-31-83-7226 58-31-83-7226
53 reniateRtloBtennoB,gniR-O 8 61 58-31-10-0326 58-31-10-0326 58-31-70-0326 58-31-01-0326 58-31-70-0326 58-31-21-0326
63 tennoBotegnalFetaidemretnI,wercSpaC **61 **23 05-00-22-585207 05-00-22-585207 05-00-22-585207 05-00-22-585207 05-00-52-585207 05-00-52-585207
73 redeelB,dnalG 2 4 80-45471 80-45471 80-45471 80-45471 80-45471 80-45471
83 redeelB,gulP 2 4 90-45471 90-45471 90-45471 90-45471 90-45471 90-45471
93 eyEgnitfiL 2 2 94811 94811 94811 94811 94811 94811
04 citsalP,gnikcaP 01 02 80-0567 80-0567 80-0567 80-0567 80-0567 80-0567
14 rehsaW 2 4 62-3532 62-3532 62-3532 62-3532 72-3532 72-3532
24 reniateR,gniR 2 4 38-27581 38-27581 38-27581 38-27581 48-27581 48-27581
34 notsiPgnitarepO,laeSpiL 2 4 477407 477407 477407 477407 377407 377407
7
Fig. 7
Table 5
metI.oN
emaNtraP000,01-"11
isp000,3-"8/531
isp000,5-"8/531
†isp000,01-"8/531
isp000,3-"4/361
isp000,5-"4/361
isp000,2-"4/112
isp000,3-"4/302
isp
1 ydoB - - - - - - - -
2 egnalFetaidemretnI 30-76203 10-07203 10-07203 61213 44983 44883 10-11903 10-11903
3 tennoB 30-86203 20-48203 10-48203 14213 20-34883 10-34883 20-53803 10-53803
4 ylbmessAmaR )(-33244 )(-44244 )(-44244 )(-44244 )(-25244 )(-25244 )(-65244 )(-65244
5 gnitarepO,notsiP 871376 618976 618976 215876 - 265986 850096 850096
6 gnitarepO,rednilyC 30-47203 10-47203 10-47203 10-47203 60-47203 60-47203 40-47203 40-47203
7 wercSgnikcoLgnisuoH 20-80303 30-80303 30-80303 30-80303 60-80303 60-80303 40-80303 40-80303
8 wercSgnikcoL 56303 70303 70303 70303 10983 10983 64803 64803
9 nepOegnahCmaR,notsiP 26303 01303 01303 93213 64983 74883 84803 84803
01 esolCegnahCmaR,notsiP 36303 90303 90303 83213 74983 84883 94803 94803
11 egnahCmaR,rednilyC 30-37203 10-37203 10-37203 10-37203 70-37203 60-37203 40-37203 40-37203
21 tennoB,tloB 50-21303 90-21303 10-21303 10-21303 71-21303 61-21303 11-21303 01-21303
31 682-AtennoB,tloB 40-971376 50-971376 10-971376 21-971376 71-971376 61-971376 11-971376 01-971376
41 gnisuoHwercSgnikcoL,sdutS 01-52-5195 01-67-8195 01-67-8195 01-67-8195 01-87-8195 01-87-8195 01-67-8195 01-67-8195
51 gnisuoHwercSgnikcoL,stuN 01-71-55921 01-13-55921 01-13-55921 01-13-55921 01-13-55921 01-13-55921 01-13-55921 01-13-55921
61 citsalP,evlaVkcehC 10-546086 10-546086 10-546086 10-546086 10-546806 10-546086 10-546086 10-546086
71 gnikcaPcitsalP,wercS 90-0495 90-0495 90-0495 90-0495 90-0495 90-0495 90-0495 90-0495
81 gnikcaPcitsalP,gulPepiP 50-03295 50-0395 50-0395 50-0395 50-0395 50-0395 50-0395 50-0395
91 gnizigrenEcitsalP,gniR 31-68581 10-68581 10-68281 10-68581 41-68581 41-68581 10-68581 10-68581
02 gnikcaPcitsalP,gniR 83-96421 42-96421 42-96421 42-96421 25-96421 25-96421 42-96421 42-96421
12 doRgnitcennoC,gniRlaeS 83-14711 63-14711 63-14711 63-14711 44-14711 44-14711 63-14711 63-14711
22 pUkcaB,gniR 22-29712 A/N A/N 62-29712 A/N A/N A/N A/N
32 tennoB,laeS 31-06091 11-06091 11-06091 11-06091 61-06091 61-06091 41-06091 41-06091
42 ediuGmaR,niP 30-31303 10-31303 10-31303 10-31303 60-31303 60-31303 40-31303 40-31303
52 rednilyCgnitarepO,gniR-O 58-31-87-7226 58-31-28-7226 58-31-28-7226 58-31-28-7226 58-31-45-10103 58-31-45-10103 58-31-28-7226 58-31-28-7226
62 egnalF.tnIotdoRnotsiPgnitarepO,gniR-O 19-29481 09-29481 09-29481 09-29481 58-31-65-10103 58-31-65-10103 09-29481 09-29481
72 notsiPgnitarepO,gniRraeW 20-32294 10-32294 10-32294 10-32294 40-32294 40-32294 01-32294 01-32294
82 doRliaT,gniRlaeS 33-14711 43-14711 43-14711 43-14711 54-14711 54-14711 43-14711 43-14711
92 gnipiW,gniR-O 07-10-83-7226 07-10-04-7226 07-10-04-7226 07-10-04-7226 58-31-54-7226 58-31-54-7226 307-10-04-7226 07-10-04-7226
03 ydoBotnotsiPegnahCmaR,gniR-O 58-31-92-7226 58-31-13-7226 58-31-13-7226 58-31-13-7226 58-31-53-7226 58-31-13-7226 58-31-93-7226 58-31-93-7226
13 egnalFtnIotdoRnotsiPegnahCmaR,gniR-O 58-31-43-7226 58-31-63-7226 58-31-63-7226 58-31-63-7226 30-19481 58-31-12-32413 58-31-44-7226 58-31-44-7226
23 egnalFtnIotlyCegnahCmaR,gniR-O 58-31-52-32413 58-31-94-7226 58-31-94-7226 58-31-94-7226 58-31-16-7226 30-19481 58-31-46-7226 58-31-46-7226
33 tennoBotlyCegnahCmaR,gniR-O 58-31-62-32413 58-31-88-7226 58-31-88-7226 58-31-88-7226 58-31-74-7226 58-31-16-7226 58-31-66-7226 58-31-66-7226
43 notsiPegnahCmaR,gniR-O 58-31-83-7226 58-31-14-7226 58-31-14-7226 58-31-14-7226 58-31-01-0326 58-31-74-7226 58-31-88-7226 58-31-88-7226
53 reniateRtloBtennoB,gniR-O 58-31-21-0326 58-31-90-0326 09-10-01-0326 58-31-71-7226 44-00-13-585207 58-31-51-0326 58-31-50-0326 58-31-70-0326
63 tennoBotegnalFetaidemretnI,wercSpaC 05-00-52-585207 44-00-52-585207 44-00-52-585207 45-00-52-585207 80-45471 45-00-13-585207 05-00-82-585207 05-00-82-585207
73 redeelB,dnalG 80-45471 80-45471 80-45471 80-45471 90-45471 80-45471 80-45471 80-45471
83 redeelB,gulP 90-45471 90-45471 90-45471 90-45471 94811 90-45471 90-45471 90-45471
93 eyEgnitfiL 94811 94811 94811 94811 80-0567 94811 94811 94811
04 citsalP,gnikcaP 80-0567 80-0567 80-0567 80-0567 20-325986 80-0567 80-0567 80-0567
14 rehsaW 72-3532 10-325986 10-325986 10-325986 53-68133 20-325986 10-325986 10-325986
24 reniateR,gniR 48-27581 58-27581 58-27581 58-27581 53-68133 53-68133 58-27581 58-27581
34 notsiPgnitarepO,laeSpiL 277407 277407 277407 277407 577407 577407 277407 277407
8
CFI "CLASS U" BOP LARGE BORE SHEAR BONNETAll Blowout Preventers' Components Conform to API Specification 16A, Latest Edition
Fig. 8
Table 6
All components aredesigned,
manufactured, andtested in accordance
with applicablespecifications.
All componentsmeet or exceed
originalequipment
manufacturer'sspecifications
Table 7
metI.oN
noitpircseDrepderiuqeR2(
)ytivaC
0003-"11isp
0005-"11isp
000,01-"11isp
000,51-"11isp
0003-"8/531isp
0005-"8/531isp
* ylbmessAtennoB)thgiR( 10-591516 10-491516 10-695416 10-914516 10-691516 10-191516
* ylbmessAtennoB)tfeL( 20-591516 20-491516 20-695416 20-914516 20-691516 20-191516
1 etaidemretnIraehS/egnalF 10-881516 10-881516 10-881516 10-954516 10-291516 10-291516
2 raehS/tennoB 30-981516 20-981516 10-9815106 10-046516 20-341516 10-341516
3 gnitarepOraehS/notsiP 10-091516 10-091516 10-091516 10-754516 10-902516 10-902516
4 otegnalF.tnI,gniR-OpiLtennoB 08-81-28-7226 08-81-28-7226 08-81-28-7226 58-31-58-7226 58-31-58-7226 58-31-58-7226
5 gnitarepO,laeSpiLraehS/notsiP 807607 807607 807607 277407 577407 577407
6 gnitarepO,gniRraeWraehS/noitsiP 51-32294 51-32294 51-32294 40-32294 40-32294 40-32294
metI.oN
noitpircseDrepderiuqeR2(
)ytivaC
-"8/531isp000,01
000,51-"8/531isp
0005-"4/361isp
000,01-"4/361isp
0003-"4/302isp
0002-"4/112isp
* )thgiR(ylbmessAtennoB 10-894416 10-0455416 10-035516 10-735516 10-625516 10-52516
* )tfeL(ylbmessAtennoB 20-894416 20-045516 20-035516 20-735516 20-625516 20-525516
1 raehS/egnalFetaidemretnI 10-667416 10-835516 10-825516 10-535516 10-325516 10-325516
2 raehS/tennoB 10-277416 10-844516 10-725516 10-435516 10-225516 20-225516
3 raehS/notsiPgnitarepO 10-067416 10-935516 10-925516 10-635516 10-425516 10-425516
4 otegnalF.tnI,gniR-OpiLtennoB 58-31-58-7226 08-81-31-20614 08-81-31-20614 08-81-31-20614 58-31-58-7226 58-31-58-7226
5 gnitarepO,laeSpiLraehS/notsiP 577407 550707 550707 550707 577407 577407
6 gnitarepO,gniRraeWraehS/noitsiP 40-32294 71-32294 71-32294 71-32294 41-32294 41-32294
9
CFI "CLASS U" BOP SHEAR RAM BLOCKSAll Blowout Preventers' Components Conform to API Specification 16A, Latest Edition
Top Seal Packer
Packer
BladePacker
Upper RamAssembly
Lower RamAssembly
* Part of lower ram assembly, Item 7
Ram Block
Fig. 9
Ram Block
Table 8
dnaeziSeroBeziSgnikroW
)1(maRreppU
ylbmessabuS
)2(maR
)3(rekcaPedalB
)4(rekcaP
)5(rekcaP
)6(laeSpoT
)7(maRrewoL
ylbmessabuS
)8(*maR
)9(*rekcaP
)01(*rekcaP
000,01,0005-"61/17isp000,51& 10-29764 10-01264 - 10-85394 20-85394 57491 20-29764 10-21264 10-74394 -
000,01&0005-"11isp 10-29394 10-90094 40-01964 40-15764 40-25764 07291 20-29394 10-01094 40-15764 40-25764
isp000,51-"11 10-792416 10-572416 40-01964 70-15764 70-25764 708096 20-792416 10-472416 70-15764 70-25764
&0005-"8/531isp000,01 10-84764 10-94764 10-01964 10-15764 10-25764 71591 20-84764 10-05764 10-15764 10-25764
isp000,51-"8/531 10-400416 10-200416 10-01964 50-15764 50-25764 63904 20-400416 10-300416 50-15764 50-25764
isp0005-"4/361 10-66764 10-60094 30-01964 30-15764 30-25764 36883 20-66764 10-70094 30-15764 30-25764
isp000,01-"4/361 10-37764 10-47764 30-01964 30-15764 30-25764 36883 20-37764 10-57764 30-15764 30-25764
isp000,01-"4/381 10-67764 10-77764 20-01964 20-15764 20-25764 10-18764 20-67764 10-87764 20-15764 20-25764
isp0003-"4/302 10-38764 10-48764 - 10-532516 - 41591 20-38764 10-58764 10-742516 20-742516
isp0002-"4/112 10-38764 10-48764 - 10-532516 - 41591 20-38764 10-58764 10-742516 20-742516
isp0005-"4/112 10-38994 10-18994 50-01964 60-15764 60-25764 30-35764 20-38994 10-28994 60-15764 60-25764
&0057-"4/112isp000,01 10-88764 10-21094 50-01964 60-15764 60-25764 30-35764 20-88764 10-11094 60-15764 60-25764
10
CFI "CLASS U" BOP PIPE RAM BLOCKSAll Blowout Preventers' Components Conform to API Specification 16A, Latest Edition
Table 9
Pipe rams for Control Flow's "Class U" blowoutpreventers are available to fit any size pipe, drill collaror kelly. All the ram assemblies listed, including blindrams, are suitable for H
2S service.
• Control Flow's "Class U" ram assemblies are self-feeding, with a large reserve of packer rubber, assuring a long-lasting seal under all conditions.
• Ram packer's rubber is locked into place and cannot be dislodged by well flow.
• Packer rubber is bonded to steel plates which confine it to the sealing area.
7 1/16" BORE - 13 5/8" BORE
Fig. 10
Packer
Ram Block
Ram BlockAssembly
Top Seal
eziSepiP
eroB-"61/17isp000,51&000,01,0005,0003
laeSpoT57491
eroB-"11isp000,01&,0005,0003
laeSpoT07291
eroB-"11isp000,51
laeSpoT708096
eroB-"8/531isp000,01&,0005,0003
laeSpoT71591
eroB-"8/531isp000,51
laeSpoT63904
dnilB
rekcaPmaRylbmessA
10-3749110-2014410-62244
rekcaPmaRylbmessA
30-3429110-8114410-33244
rekcaPmaRylbmessA
71-80809610-1214410-43244
rekcaPmaRylbmessA
30-4059110-7414410-44244
rekcaPmaRylbmessA
12-0190410-3414410-34244"050.1 30-62244 01-3749180-20144 ––– ––– ––– –––
"513.1 40-62244 20-3749120-20144 52-33244 80-3429170-81144 ––– 32-5121360-8414430-44244 –––
"066.1 50-62244 30-3749130-20144 20-33244 60-3429120-81144 10-80809620-1214420-43244 22-5121350-8414440-44244 –––
"009.1 60-62244 40-3749140-20144 30-33244 50-3429130-81144 20-80809630-1214430-43244 82-5121370-8414472-44244 –––
"61/12 70-62244 70-3749170-20144 40-33244 40-3429140-81144 30-80809640-1214440-43244 02-5121330-8414491-44244 02-0190430-4414420-34244
"8/32 80-62244 50-3749150-20144 50-33244 10-3429150-81144 40-80809650-1214450-43244 10-5121310-8414450-44244 10-0190410-4414430-34244
"8/72 90-62244 60-3749160-20144 60-33244 20-3429160-81144 50-80809660-1214460-43244 20-5121320-8414460-44244 20-0190420-4414440-34244
"2/13 01-62244 10-4749110-40144 70-33244 10-4739110-91144 70-80809620-2214480-43244 30-5121310-9414470-44244 30-0190440-4414450-34244
"4 11-62244 20-4749120-40144 90-33244 20-4739120-91144 90-80809640-2214401-43244 40-5121320-9414480-4244 40-0190460-4414470-34244
"2/14 21-62244 30-4749130-40144 01-33244 30-4739130-91144 01-80809650-2214411-43244 50-5121330-9414490-4244 50-0190470-4414480-34244
"4/34 ––– 21-33244 40-4739140-91144 ––– 60-5121310-0514412-44244 60-0190410-5414401-34244
"5 31-62244 40-4749140-40144 31-33244 50-5739150-91144 11-80809660-2214421-43244 70-5121320-0514411-44244 70-0190420-5414411-34244
"2/15 41-62244 60-4749170-40144 41-33244 10-5739110-02144 21-80809610-3214431-43244 80-5121330-0514421-44244 80-0190430-5414421-34244
"4/35 ––– 32-33244 03417601-02144 ––– ––– –––
"6 ––– 61-33244 20-5739120-02144 31-80809620-3214441-43244 90-5121340-0514431-44244 90-0190440-5414441-34244
"8/56 ––– 71-33244 30-5739130-02144 41-80809630-3214451-43244 01-5121350-0514422-44244 01-0190450-5414451-34244
"7 ––– 81-33244 40-5739140-02144 51-80809610-4214461-43244 11-5121310-1514441-44244 11-0190410-6414461-34244
"8/57 ––– 91-33244 50-5739150-02144 61-80809620-4214471-43244 40-6059120-1514451-44244 21-0190420-6414471-34244
"4/37 ––– 22-33244 11-5739190-02144 ––– 90-6059160-1514452-44244 32-0190470-6414422-34244
"8/58 ––– 02-33244 60-5739160-02144 ––– 50-6059130-1514461-44244 31-0190430-6414481-34244
"9 ––– ––– ––– 60-6059140-1514442-44244 41-0190440-6414491-34244
"8/59 ––– ––– ––– 70-6059150-1514471-44244 51-0190450-6414402-34244
"4/301 ––– ––– ––– 2738310-2514481-44244 22-0190460-6414412-34244
"4/311 ––– ––– ––– 10-72241610-80241662-44244 –––
"8/331 ––– ––– ––– ––– –––
"8/531 ––– ––– ––– ––– –––
"4/331 ––– ––– ––– ––– –––
"61 ––– ––– ––– ––– –––
"8/581 ––– ––– ––– ––– –––
"02 ––– ––– ––– ––– –––
11
eziSepiP
eroB-"4/361isp000,01,0005,0003
laeSpoT36883
eroB-"4/381isp000,01
laeSpoT44414
eroB-"4/361isp000,01&,0005,0003
laeSpoT41591
isp0003eroB-"4/302isp0002eroB-"4/112
laeSpoT27904
eroB-"4/362isp0003&0002
laeSpoT00243
dnilB
rekcaPmaRylbmessA
10-3588310-9714410-25244
rekcaPmaRylbmessA
91-6581410-4814410-45244
rekcaPmaRylbmessA
30-9429110-1914410-65244
rekcaPmaRylbmessA
91-2690410-4124410-26244
rekcaPmaRylbmessA
02-1024310-9024410-06244
"050.1 ––– ––– ––– ––– –––
"513.1 ––– ––– ––– ––– –––
"066.1 ––– ––– ––– ––– –––
"009.1 12-25244 12-3588330-08144 ––– ––– ––– –––
"61/12 ––– ––– ––– ––– –––
"8/32 60-25244 20-3588310-08144 10-6581410-5814420-45244 ––– 10-2690410-5124420-26244 10-1024310-71041620-06244
"8/72 20-25244 30-3588320-08144 20-6581420-5814430-45244 ––– 20-2690420-5124430-26244 20-1024320-71041630-06244
"2/13 30-25244 40-3588310-18144 30-6581430-5814440-45244 30-8221310-2914420-65244 30-2690430-5124440-26244 30-1024310-81041640-06244
"4 70-25244 50-3588320-18144 40-6581450-5814460-45244 40-8221320-2914430-65244 40-2690450-5124460-26244 40-1024320-81041650-06244
"2/14 40-25244 60-3588330-18144 50-6581460-5814470-45244 50-8221330-2914440-65244 50-2690460-5124470-26244 50-1024330-81041660-06244
"4/34 80-25244 70-3588340-18144 60-6581480-5814490-45244 60-8221340-2914450-65244 60-2690480-5124490-26244 –––
"5 50-25244 80-3588350-18144 70-6581490-5814401-45244 70-8221310-3914460-65244 70-2690490-5124401-26244 60-1024340-81041670-06244
"2/15 90-25244 90-3588360-18144 80-6581401-5814411-45244 80-8221320-3914470-65244 80-2690401-5124411-26244 70-1024350-81041680-06244
"4/35 ––– ––– ––– ––– –––
"6 01-25244 01-3588310-19294 90-6581421-5814431-45244 90-8221330-3914480-65244 90-2690421-5124431-26244 80-1024310-91041690-06244
"8/56 11-25244 11-3588320-19294 01-6581431-5814441-45244 01-8221340-3914490-65244 01-2690431-5124441-26244 90-1024320-91041601-06244
"7 21-25244 21-3588330-19294 11-6581441-5814441-45244 11-8221350-3914401-65244 11-2690441-5124451-26244 01-1024330-91041611-06244
"8/57 31-25244 31-3588340-19294 21-6581451-5814461-45244 21-8221360-3914411-65244 21-2690451-5124461-26244 11-1024340-91041621-06244
"4/37 ––– ––– ––– ––– –––
"8/58 51-25244 51-3588360-19294 31-6581461-5814471-45244 41-8221380-3914431-65244 31-2690461-5124471-26244 –––
"9 61-25244 61-3588370-19294 41-6581471-5814481-45244 51-8221390-3914441-65244 41-2690471-5124481-26244 31-1024360-91041641-06244
"8/59 71-25244 71-3588310-29294 51-6581481-5814491-45244 61-8221301-3914451-65244 51-2690481-5124491-26244 41-1024310-02041651-06244
"4/301 81-25244 81-3588320-29294 02-6581412-5814412-45244 71-8221310-4914461-65244 02-2690410-6124402-26244 51-1024320-02041661-06244
"4/311 91-25244 91-3588330-29294 ––– 81-8221320-1914471-65244 12-2690420-6124412-26244 61-1024330-02041671-06244
"8/331 02-25244 02-3588340-29294 22-6581402-5814422-45244 40-2529130-1914481-65244 22-2690430-6124422-26244 71-1024340-02041681-06244
"8/531 ––– ––– 42-8221350-1914412-65244 42-2690450-6124442-26244 –––
"4/331 ––– ––– 91-8221340-1914491-65244 ––– –––
"61 ––– ––– 12-8221310-5914402-65244 32-2690440-6124432-26244 81-1024310-12041691-06244
"8/581 ––– ––– 52-8221310-95441622-65244 ––– –––
"02 ––– ––– ––– ––– 91-1024320-12041602-062644
CFI "CLASS U" BOP PIPE RAM BLOCKSAll Blowout Preventers' Components Conform to API Specification 16A, Latest Edition
Table 10
Fig. 11
PackerRam Block
Top SealPipe rams for Control Flow's "Class U" blowout preventers areavailable to fit any size pipe, drill collar or kelly. All the ram assemblieslisted, including blind rams, are suitable for H2S service.
• Control Flow's "Class U" ram assemblies are self-feeding, with a large reserve of packer rubber, assuring a long-lasting seal under all conditions.
• Ram packer's rubber is locked into place and cannot be dislodged by well flow.
• Packer rubber is bonded to steel plates which confine it to the sealing area.
Ram Block Assembly
16 3/4" BORE - 26 3/4" BORE
2
Dual or Single Ram Hydraulic BOPs
Fast, EffectiveBlowout Protection
Door
Hydraulic Port
Ram Holder
Hinge
Ram Rubber
Pipe Ram Block
Guide Rib
Manifold
Pipe Centering Guide
Cylinder
Locking Shaft
Lip-TypePiston Seal
CylinderHead
Piston
Retracting Screw
Ram Shaft Packing
Ram Shaft
MODEL DRH - DUAL RAM HYDRAULIC BOP
3
A positive seal every time. Control Flow’s DRH (Dual RamHydraulic) or SRH (Single Ram Hydraulic) models let you shutin a well in seconds from a control panel located at the driller’sstation or any other place you choose. There’s no waiting forrig hands to get to the cellar and manually close the rams.The trouble-free, efficient design of these 5,000-psi-working-pressure BOPs has been field-proven in many years of ruggedservice.
Double protection. Install pipe rams in one compartment of aDRH and blind rams in the other and you can shut in the wellwhether there’s pipe in the hole or not. Each set of ramsoperates independently of the other.
Automatic pipe string alignment. As rams close, guides onthe ram blocks automatically center the pipe string in thewellbore, even if the string is hanging off center.
Positive pressure control. One-piece ram rubbers seal acrossthe wellbore and against the top of the ram cavity. Retractingscrews allow ram blocks to move slightly in their holders toensure positive alignment as sealing contact occurs.
Extrusion plates channel rubber flow toward sealing sur-faces as rams meet. Each rubber is secured to its ram blockby two retaining screws, which fit into trunnion nuts extendingthrough the extrusion plates molded into the rubber. Thiskeeps the rubber in proper sealing position, even underextreme pressure.
Well pressure assists sealing. When rams are closed,pressure in the wellbore pushes them upward and inward,squeezing the ram rubbers more tightly against the sealingsurfaces.
Any standard 1,500-psi accumulator will operate yourControl Flow BOP. Rams can also be opened and closed witha hand pump, if necessary.
Rams can be locked in their closed position by manuallyturning each locking shaft clockwise until it shoulders againstthe cylinder head.
Rig crew can close rams manually with the locking shafts ifhydraulic pressure should fail. Closed rams can be openedonly by hydraulic pressure.
Locking shafts can’t corrode or freeze up because theexposed portions of their threads are constantly immersed inhydraulic fluid.
Each ram and its operating mechanism is completely self-contained. Ram, ram shaft, piston and cylinder are allmounted on a hinged door, which can be swung open after thecap screws are removed.
Swing-open doors simplify ram changing. Rams can evenbe changed with pipe in the hole, if necessary. Bottom doorsswing out from under the upper cylinders on DRH models,allowing a hoisting line to be attached directly to the rams,which slide on and off their shafts horizontally.
Hydraulic passages are built into the hinges, so doors canbe opened without draining fluid or breaking hydraulicconnections. Since the hydraulic circuits are unbroken, ramscan be extended and retracted while the doors are open tofacilitate ram changing and testing.
Hydraulic control lines connect to ports in the hinge brack-ets at whichever end of the BOP is the most convenient for thehookup. Fluid flows to the opposite end through manifolds onthe outside of the body. Pipe plugs seal the unused ports.
Simple, trouble-free design. There’s just a single piston,made from stainless steel and manganese bronze, for eachram. This piston is completely enclosed and protected by thecylinder. Control Flow’s piston seals are the large lip-typemade for use on moving parts — not O-rings.
Ram shaft packing protects operating mechanism fromwellbore pressure and contamination by wellbore fluid.
Self-draining ram compartments. The bottom of each ramcompartment slopes toward the wellbore to drain away mudand sand that could interfere with free movement of the rams.
Free-floating rams prolong rubber life. When rams are open,they rest on narrow guide ribs and touch no other part of theram cavity. Ram rubbers have no contact with the top of thecavity until the rams are nearly closed, which greatly reducesrubber wear.
Interchangeable ram blocks. Ram blocks for various sizes ofdrill pipe, tubing and casing, and for complete shut-off of thewellbore, can be interchanged in the same ram holder.
High-strength alloy steel is used for ram blocks, ram holders,cylinder heads, doors and the deep-ribbed body. Ram shaftsare stainless steel.
Dual ram model’s double body configuration saves installa-tion space. Two ram compartments in one unitized bodyoffers a lower overall height than two single preventersinstalled one above the other.
Choice of studded or flanged connections lets you matchyour DRH or SRH to the other components of your BOP stack.(Studded connections shown.)
DRH Features
4
Model DRH
5
Parts List - DRH BOPs
Description Qty.
Working Pressure 5,000 psi
Item No. Bore 7 !/16" 11" 13 %/8"
1 Body 1 - - -2 Door, Right Hand 2 133002 134807 1346073 Door, Left Hand 2 133003 134808 1346084 Pipe Plug 24 - 065001 065001
32 065001 - -5 O-Ring, Door 4 030030 030008 1340146 Cap Screw, Door 32 133012 - -
40 - 134806 1346067 Cylinder 4 133004 134005 1340058 Cylinder Head 4 - 134006 1340069 Cylinder Head, Right
Hand2 133005 - -
10 Cylinder Head, Left Hand
2 133006 - -
11 O-Ring, Cylinder and Cylinder Head
8 030141 030007 030007
12 Cap Screw, Cylinder and Cylinder Head
24 - - -
13 Stud, Cylinder and Cylinder Head
24 215283 134418 134418
14 Nut, Cylinder and Cylinder Head
24 020101 020103 020103
15 Manifold, Cylinder 4 133007 - -16 O-Ring, Cylinder
Manifold16 030056 - -
17 O-Ring, Cylinder Manifold Port
8 - 030058 030058
18 Ram Shaft 4 133008 193601 19360119 Packing, Ram Shaft 32 - 030003 03000320 Packing Adaptor, Ram
Shaft4 132415 115025 192011
21 O-Ring, Packing Adaptor — Outer
8 030077 030006 030006
22 O-Ring, Packing Adaptor — Inner
8 030000 030005 030005
23 Retainer, Packing Adaptor
4 040952 - 041017
24 Ring, Packing Back-Up 4 - 115026 01502625 Retainer, Packing Back-
Up Ring 4 - 041017 041017
26 Scraper Ring, Ram Shaft
4 040395 - -
27 Piston Assembly 4 132413 192006 19200628 Body 4 132420 192007 19200729 Rubber 8 132422 115021 11502130 Retainer, Rubber 8 132421 115020 11502031 Cap Screw, Rubber
Retainter32 132423 010657 010657
32 Lock Washer, Retainer Cap Screw
32 - 025032 025032
33 O-Ring 4 030071 030000 03000034 Lock Nut, Piston 4 132414 192103 192103
Part No. Description Qty.
Working Pressure 5,000 psi
Item No. Bore 7 !/16" 11" 13 %/8"
35 Set Screw 4 010015 - - 8 - 010000 010000
36 Locking Shaft 4 141218 193703 19370337 Thrust Bushing, Locking
Shaft4 130014 134008 134008
38 Retainer, Thrust Bushing 4 040146 040001 040001
39 O-Ring, Thrust Bushing — Outer
8 030011 - -
40 O-Ring, Thrust Bushing — Inner
8 030065 - -
41 Packing, Locking Shaft 12 - 030210 03021042 End Ring, Locking Shaft
Packing4 - 030211 030211
43 Scraper Ring, Locking Shaft
4 040384 040002 040002
44 Carrier, Scraper Ring 4 - 134009 13400945 Hinge Bracket 4 132411 134810 13401046 Dowel Pin 8 050080 050096 05009647 Cap Screw, Hinge
Bracket16 - 010726 010727
48 Cap Screw, Hinge Bracket — Short
16 010691 - -
49 Cap Screw, Hinge Bracket — Long
4 010622 - -
50 Manifold, Hinge 2 - 134812-1 - — Straight 4 132427 - 13460951 Manifold, Hinge
— Curved2 - 134812-2 -
52 O-Ring, Hinge Manifold 16 030054 030056 03005653 Hinge Pin 4 133010 134811 13400154 O-Ring, Hinge Pin 40 030061 030064 03006555 Retainer, Hinge Pin 4 132424 132424 13242456 Pipe Plug 8 066326 066326 06632657 Pipe Plug 4 - 065009 -58 Grease Fitting 8 050267 - -59 Stud, Body 24 011017 011026 -
32 - - 01042260 Nut, Body Stud 24 020011 020014 -
32 - - 02001261 Bushing 8 065145 065145 06514562 Ram Assembly 4 See Ram Parts List63 Wrench, Door 1 050363 050828 05045964 Wrench, Cylinder and
Cylinder Head1 050561 050370 050370
65 Handwheel 4 131107 115050 11505066 U-Joint 4 202011 202007 20200767 Stem Assembly 4 202402 202402 202402
Part No.
6
71/16”, 5,000 psi DRH & SRH BOPs 11”, 5,000 psi DRH & SRH BOPs
Pipe O.D.
Ram Assemblya
Ram Block Sub-
AssemblybRam Block
Ram Rubber
C.S.O. 215269 215227 215231 2152751.315" 215270 215228 215232 2152761.660" 215271 215229 215233 2152771.900" 215272 215230 215234 2152782 #/8" 215273 215211 215235 2152792 &/8" 215274 215212 215236 2152803 !/2" 215244 215213 215237 2152814 " 215112 215114 215116 2151184 !/2" 215245 215214 215238 2152205 " 215113 215115 215117 2151195 !/2" 215246 215215 215239 2152216 &/8" 215247 215216 215240 2152227 " 215248 215217 215241 2152237 %/8" 215249 215218 215242 2152248 %/8" 215226 215219 215243 215225a Includes ram holder (135875), ram block sub-assembly and 2 ram block retracting screws (135575).b Includes ram block, ram rubber and 2 ram rubber retaining screws (135546).
Part Number
Pipe O.D.
Ram Assemblya
Ram Block Sub-
AssemblybRam Block
Ram Rubber
C.S.O. 215122 215140 215158 2151761.315" 215123 215141 215159 2151771.660" 215124 215142 215160 2151781.900" 215125 215143 215161 2151792 !/16" 215126 215144 215162 2151802 #/8" 215127 215145 215163 2151812 &/8" 215128 215146 215164 2151823 !/2" 215129 215147 215165 2151834 " 215130 215148 215166 2151904 !/2" 215131 215149 215167 2151915 " 215132 215150 215168 2151925 !/2" 215133 215151 215169 2151936 %/8" 215134 215152 215170 2151947 " 215135 215153 215171 2151957 %/8" 215136 215154 215172 2151968 %/8" 215137 215155 215173 2151979 %/8" 215138 215156 215174 21519810 #/4" 215139 215157 215175 215199a Includes ram holder (135551), ram block sub-assembly and 2 ram block retracting screws (135575).b Includes ram block, ram rubber and 2 ram rubber retaining screws (135546).
Part Number
Ram Parts List
135/8”, 5,000 psi DRH & SRH BOPs
Pipe O.D.
Ram Assemblya
Ram Block Sub-
AssemblybRam
BlockRam
RubberC.S.O. 135783 135940 135842 1358571.315" 135787 135941 135788 1357891.660" 135791 135942 135788 1357931.900" 135795 135943 135788 1357972 !/16" 136073 142643 136075 1360762 #/8" 135799 135944 135863 1358582 &/8" 135803 135945 135863 1358593 !/2" 135807 135946 135808 1358604 " 135811 135947 135840 1358614 !/2" 135815 135948 135840 135862a Includes ram holder (135847), ram block sub-assembly, 2 ram block retracting screws (135848) and centering plug (010706).b Includes ram block, ram rubber and 2 ram rubber retaining screws (135545).
Part Number
Vertical Bore Size (inches)
Maximum Service Pressure Rating (psi)
Test Pressure
(psi)
Maximum Ram Size (inches)
71/16 5,000 10,000 41/2
11 5,000 10,000 8 5/8
135/8 5,000 10,000 10 3/4
Specifications
B C D E F G
Vertical Bore Size
Studded End
Connec-tions
Flanged End
Connec-tions Width Length
Center to Front
Center to Rear
Door Open to Change
Rams
Door Open to Change
Rams
71/16 263/4 301/2 211/2 58 95/16 121/8 21 3411 33 501/2 283/4 891/4 123/4 16 32 46
135/8 36 495/8 335/8 923/4 143/4 187/8 41 54
AHeight
Dimensions (inches)
E
D
B
G
F
C
A
7
Body is produced from high quality static-cast, sand moldedcasting using a process called “Argon Oxygen Refining” whichallows cleaner metal, with low residual oxygen, nitrogen, andhydrogen.Ram Cavity bottoms are steeply sloped to prevent accumula-tion of sand or drilling fluids.Single or Double Body configurations are available with2,000 psi or 3,000 psi or combination of both studded top andbottom connections.
Well Pressure Seals are located in a cartridge between thebody and pressure bonnet for ease of installation or replace-ment. This assures positive alignment between the body andbonnet assembly.Ram Assembly combines toughness and a generous supplyof self-feeding packing.Ram Blocks can be changed with pipe in the hole.
All “TROJAN” BOP assemblies are trimmed for internal H2Sservice. This feature is standard at no extra cost.
Control Flow’s “TROJAN” ram type blowout preventer is a field proven workhorse. You’ll find it pulling its weight on many majoroil company wells and is one of the most easily maintained and reliable BOPs ever built.
SPECIAL FEATURES:
“TROJAN” Blowout Preventers
HYDRAULIC
MECHANICAL
Weight Single 1,300 lbs.Double 2,300 lbs
Overall Height, Less Studs Single 13 !/8"Double 22 !/4"
Overall Length 63"Overall Width, Less Handwheel 21 #/4"Opening Through Preventer 7 !/16"Working Pressure 3,000 psiTest Pressure 6,000 psiHandwheel Diameter 14"Ring Joint Gasket API Number R-45
Dimensions & Weights
Weight Single 1,272 lbs.Double 2,335 lbs
Overall Height, Less Studs Single 13 !/8"Double 22 !/4"
Overall Length 63"Overall Width, Less Handwheel 21 #/4"Opening Through Preventer 7 !/16"Working Pressure 3,000 psiTest Pressure 6,000 psiHandwheel Diameter 48"Ring Joint Gasket API Number R-45
Dimensions & Weights
Packers and ram assemblies interchange with otherpreventers of this design.
Packers and ram assemblies interchange with otherpreventers of this design.
8
“TROJAN” Mechanical Blowout Preventer
Features:• One man can open or close the “TROJAN.”
• A large 45” diameter handwheel is furnished for ease of operation.
• Timing problems are minimized compared to olderdesigned B.O.P.’s.
• Thrust loads are carried by high capacityneedle bearings.
• Grease fittings on the bonnetassembly allow the bearingsto be lubricated.
• Sprocket protector on the bodyprotects sprocket and drive bar.
• Lifting plates are provided forease of handling.
• All maintenance can be donewith standard tools. Nospecial tools are required.
• Barrier ring between stemnut and bonnet eliminatesside loading during openingand closing of the rams.
I t em Description Qty. Part No.
1 Body 12 1 !/8" x 5 !/2" T.E. Stud B-7 24 0110103 1 !/8" Hex Nut, Gr. 2H 24 020003-624 1" Hex Nut, Gr. 2H 36 020001-625 1" x 4 !/4" T.E. Stud Gr. B-7 24 00646 Pillow Block 4 00667 !/2" x 2" Hex Head Cap Screw 8 0106098 Bearing NTA-6074 8 00699 Bearing Race TRC-6074 16 007010 Snap Ring N-500-262 4 007211 !/4" Grease Fitting 8 007312 Snap Ring N-5100-375 4 007413 Chain 4 0075-A14 #/4" x 1 !/2" Socket Head Cap Screw 24 007615 Snap Ring N-5100-125 4 007716 Lifting Plate 2 008217 Handwheel, 36" 2 008418 Handwheel Bar 2 008719 Universal Joint 2 008920 O-Ring, 2-339 4 018221 O-Ring, 2-442 4 018822 Wiper, Type D-2250 4 0253
Parts interchange with other preventers of this design.*#50 - See Page 10 for Ram Block Assembly.
*
I t em Description Qty. Part No.
24 Sprocket for Bearing Housing 4 310225 Sprocket for Drive Shaft 4 310326 Grease Plate 4 310427 Ram Shaft, Left Hand 2 310528 Ram Shaft, Right Hand 2 310629 Thread Protector 4 310730 Stem Bearing Housing/ Right Hand 2 310831 Stem Bearing Housing/ Left Hand 2 310932 Bearing Housing 4 311033 Packing Gland 4 311134 Packing Assembly 4 311436 Drive Shaft 2 311537 Sprocket Protector 4 311638 Ram Guide Pin 4 311739 Alignment Plug 4 311840 End Cover 4 311941 Pressure Plate 2 312242 Ram Tool 1 313443 Barrier Ring 4 313744 O-Ring 2-226 4 0211
9
“TROJAN” Hydraulic Blowout Preventer
Features:• Hydraulic fluid passages are ported through the body, eliminating the need for external piping.
• Ram position can be positively determined visually. Slots are provided in both the cylinderhead and the M.O.R. protective cover.
• The bi-directional piston seal eliminates thepossibility of improper installation.
• The Hydraulic “TROJAN” is designed to beoperated with any oil field accumulator system.Less than 1,000 psi will close the BOP withfull working pressure in the bore. Themaximum hydraulic operating pressure is 2,500.
• The hydraulic lines are not disconnected duringram change. This feature eliminates the possibilityof hydraulic fluid contamination.
• All maintenance can be donewith standard tools. Nospecial tools are required.
• A weep hole is provided betweenwellbore ram shaft packing and thehydraulic seal. This feature eliminates thepossibility of hydraulic fluid contamination should the ram shaft packing fail.
• Manifold protectors are threaded into the body to protect against damage to the manifold ports.
• Lifting plates are provided for ease of handling.
• A bolt-on hydraulic manifold block is provided so the BOP body is not affected should damage arise to thethreaded connections for the accumulator units’ operating lines.
• The hydraulic “TROJAN” can be converted to the mechanical version.
I t em Description Qty. Part No.
1 Body 12 1 !/8" x 5 !/4" T.E. Stud Gr. B-7 24 0110103 1 !/8" Hex Nut, Gr. 2H 24 020003-624 1" Hex Nut, Gr. 2H 36 020001-625 1" x 4 !/4" T.E. Stud Gr. B-7 24 00646 O-Ring 2-226 8 02117 !/4" NPT Pipe Plug 12 00788 !/4" NPT Weep Plug 4 00799 #/4" x 9 #/4" lg. T.E. Stud A193 B-7 24 008010 !/2" x 3" lg. Socket Head Cap Screw 4 008111 Lifting Plate 2 008212 #/4" Nut, Gr. 2H 24 008313 Handwheel 14" 4 008514 Universal Joint 4 008915 !/4" x !/4" S.H. Set Screw/S.S. 4 009516 #/8" x #/4" Grade 8 Bolt 12 009617 O-Ring, 2-228 12 018118 O-Ring, 2-339 4 018219 O-Ring, 2-017 4 018320 O-Ring, 2-161 8 018421 O-Ring, 2-116 8 018522 O-Ring, 2-328 4 0186
I t em Description Qty. Part No.
23 O-Ring, 2-210 8 018724 O-Ring, 2-442 4 018825 Wiper, Type D-2250 4 025326 Crown Seal, CP-350 4 025427 Packing Gland 4 311128 Packing Assembly 4 311429 Ram Guide Pin 4 311730 Alignment Plug 4 311831 End Cover 4 311932 Pressure Plate 2 312233 Piston 4 312334 Cylinder 4 312435 Balance Stem 4 312536 Protector, M.O.R. 4 312637 Locking Shaft 4 312738 Ram Shaft 4 312839 Manifold Tube 4 312940 Manifold Block 2 313041 Bonnett 4 313142 Manifold Protector 2 313243 Ram Tool 1 313444 Brass Spacer Ring 4 3136
TO OPEN TO CLOSEMaximum operating 1,500 1,500pressure (psi)Ratio 4.2:1Volume of fluid .59 .72(U.S. gallons)Piston Stroke (inches) 4.125 4.125
Hydraulic System Operational Data
Parts interchange with other preventers of this design.*#50 - See Page 10 for Ram Block Assembly.
*
10
PIN
PACKER
PLATEPACKER
Type “EH” Ram Block Assembly
The Type EH ram allows for quick and easy packer replace-ment. No special tools are required
The packers are bonded to anti-extrusion plates or pins whichconfine the large reserve of feedback rubber.
Control Flow also manufactures replacement parts for:
Shaffer “Type A”“Type B”“Type E”“LWS” & “LWP” hydraulic BOPs“Type 45” mechanical BOP“Type 50” rotating preventerComplete array of ring seals and seal kits forall Shaffer spherical preventers
Cameron Complete line of BOP parts
Pipe O.D.Centers (Inches)
Assembly Number
Block Part Number
Assembly Number
Block Part Number
Right Hand Part Number
Left Hand Part Number
1.315 2 @%/32 3206 3071 3200 3281 3060 30601.660 2 @%/32 3207 3072 3201 3282 3061 30611.900 2 @%/32 3208 3073 3202 3083 3062 30622 !/16 2 @%/32 3209 3074 3203 3084 3063 30632 #/8 3 #%/64 3210 3075 3204 3085 3064 30642 &/8 3 #%/64 3211 3076 3205 3086 3065 3065
LEFT HAND INNER PACKERRIGHT HAND
Single Offset Rams
Pipe O.D Block Inner PackerC.S.O. 3045 30001.315 3046 30011.660 3047 30021.900 3048 30032 !/16 3049 30042 #/16 3050 30052 #/8 3051 30062 #/4 3052 30072 &/8 3053 30083 !/2 3054 30094 3077 3066
4 !/2 3078 30675 3079 3068
5 !/2 4080 3069
"EH" Ram Assemblies
Outer packer 3023
Flocon IBOPThe proven inside preventer.Simple, dependable and effective, the FloconIBOP is your first line of defense against mostinside blowout hazards. By preventing high pres-sure backflow through the drill string, the FloconIBOP helps protect your crew, the swivel, stand-pipe and pumps, while drilling or tripping, whenseconds count!
Flocon’s IBOP can be run downhole, right throughall conventional BOP stacks. What’s more, it canbe left in-line and run as deep as necessary whilepermitting drilling fluids to flow freely down thestem. Unlike downhole preventers, you don’t haveto trip the whole string to install, inspect or re-move Flocon’s IBOP.
1. Heavy duty construction.The IBOP is built to withstand today’s heavier drillstring loads, higher pressures (up to 15,000 psi),abrasive extremes and there’s a Flocon IBOPmodel to fit all common tool joint and drill pipespecs.
2. Large sealing area.Flocon’s conical, case hardened steel dart anddurable, elastomer seat provide a positive sealeven when abrasion and severe service haveseverely damaged the seat. It’s that good!
3. Outstanding flow characteristics.Our unique dart configuration and broad sealingsurface dramatically reduces cutting action forsuperior downhole flow throughout the kill.
4. Fast, five-step operation.Stab it, spin it with its built-in handles, torque it,unscrew the releasing pin and back the settingtool out of the sealing sub. That’s all there is to it.You can then stab the kelly or pipe and run thestring in to kill the blowout below the BOP stack ifnecessary. Your crew’s protected, yourhardware’s protected. It’s that simple. It’s thateffective.
Inside Blowout Preventer Specif iLifting handle
Setting toolbody Releasing pin
Hold down bar
Alloy steel body
Case hardenedsteel dart
Cup-typeelastomer seal Inconel spring
Spider
Base stand
Item Number
Number RequiredRecommended Spares
Nominal Size (in.)
O.D. (in.)
Length (in.) Assy
2#/8 Up.Tbg. 3!/4 11!/4 7000462 &/8 Up. Tbg. 3#/4 14!%/16 7000473!/2 Full Hole 4%/8 18%/8 7000453!/2 Up. Tub. 4#/4 20!/8 7000323!/2 IF 4#/4 18!/2 7000084 IF 5#/4 20 7000134 Full Hole 5!/4 19!/2 700011
4!/2 Up. Eve 5(/16 20!/8 7000644!/2 IF 6!/8 20%/8 7000164!/2 IF HP 6!/4 20%/8 7000174!/2 IF HP 6#/8 20%/8 7000494!/2 Full Hole 5#/4 19%/8 7000144!/2 API Full Hole 6 19%/8 700037
4!/2 API Full Hole 6!/8 20%/8 700040
4!/2 API Full Hole 6!/4 19%/8 700054
4!/2 Xtra Hole 6 20#/8 700035
4!/2 Xtra Hole 6!/4 20#/8 700036
5 Xtra Hole 6!/4 20%/8 7000535!/2 API Full Hole 7 23#/16 700041
1. Prior to pin removal,backflow is virtually unre-stricted.
2. Releasing pin removed.Backflow prevented.
3. Large diameter lessensflow restriction and dartturbulence, permits highvolume flow-by.
1 2 3 4 5 6 7 8 9 10 11
1 1 1 1 1 1 1 1 1 1 11 1 1
Main Sub
Sealing Sub Body Spider Spring Dart
Dart Rubber Handle
700100 700392 700102 700393 700395 700394 700124 700396 700111 700109 700141700114 700400 700116 700399 700122 700401 700265 700138 700123 700109 700141700223 700222 700200 700354 700122 700355 700265 700189 700196 700109 700141700253 700254 700255 700188 700122 700192 700265 700193 700252 700109 700141700190 700191 700186 700188 700122 700192 700265 700193 700182 700109 700141700249 700250 700251 700286 700243 700311 700118 700259 700296 770247 700141700389 700387 700276 700388 700243 700386 700118 700189 700273 700109 700141
700475 700476 700477 700188 700122 700192 700265 700193 700478 700109 700141700260 700261 700240 700241 700243 700244 700245 700246 700238 770247 700141700292 700293 700240 700241 700243 700244 700245 700246 700238 770247 700141700409 700410 700240 700241 700243 700244 700245 700246 700238 770247 700141700330 700331 700307 700286 700243 700311 700118 700288 700304 770247 700141700333 700332 700307 700286 700243 700311 700118 700303 700304 770247 700141
700338 700339 700307 700286 700243 700311 700118 700288 700304 770247 700141
700425 700424 700426 700286 700243 700311 700118 700288 700304 770247 700141
700320 700321 700316 700286 700243 700311 700118 700322 700296 770247 700141
700326 700327 700316 700286 700243 700311 700118 700322 700296 770247 700141
700292 700293 700240 700241 700243 700244 700245 700246 700238 770247 700141700360 700369 700362 700363 700345 700368 700366 700367 700359 770247 700141
cations and Part Numbers
Flocon’s unique dart and seat design offers superior downhole fluid flow.
Proprietary Information of Control Flow, Inc.- Products - 10/2002
Two Products currently under Development and Patent Review:
Ultimate Motion Compensation Cylinder Assembly (UMCCA)
Drill String Compensator Improvements
• Widespread Applications involving suspended payloads or sensor platforms,soft sub-sea landing / ROV docking and heave-free drill rig tensioning.
• Systems Adaptability permits usage with most known compensatorconfigurations and upgrading of existing passive systems to activated systems.
• Integrated Computer Controller processes accelerometer and other inputs usingproprietary control algorithms with user-friendly operator interface.
• 95% Or Better Heave Isolation achieved by utilizing a controller developedposition for load insensitivity, drift and accumulated error-free motion compensatorperformance.
Active / Passive Payload Motion Management Systems
Reliable, Low Maintenance Riser And Guide Line Tensioners• Proven Ram Technology based on more than 30 years of experience in providing
ram tensioners for offshore petroleum use and for the U.S. Navy.
• Automatic Safety Arrest limits ram velocity and physically stops ram to eliminatetensioner damage in event of wire rope failure.
• Maintenance Simplicity because of split ram seals which are replaceable withoutsystem disassembly or wire rope removal.
• Operational Simplicity for reliable riser and guide line tensioning.
• Single And Dual Models can provide from 80,000 to 250,000+ pounds tension.
Rate Line Tension 80,000 lb (356 kN) to 250,000 lb (1,112 kN) +
Wire Line Travel 50 ft (15.2 M ) or 60 ft. (18.2 M)Wire Line Diameter 1.75 in. (44.5 mm) or 2.875 in. (73 mm)
Rate Line Tension 16,000 lb (7,257 kg)Wire Line Travel 40 ft (12.1 M ) Max.Wire Line Diameter .75 in. (1.9 mm)
* 80K, 100K and 150K Single or Dual also available.
Motion Management/Riser & Guide LineTensioners
• Light Weight Compensators reduce wire line wear and minimize derrickstructure.
• More Usable Derrick Height with single cylinder design.
• Compact Design features an integral traveling block.
• Hydraulic Lockup in Any Position allows faster, more flexible drilling operations.
• In-Line Load Path through a single cylinder yields lowest weight and highefficiency.
• High Capacity 800,000 Pound Working Capacity and high efficiency satisfydemanding requirements.
• Innovative Pneumatic / Hydraulic Power Combination provides positive controland flexibility.
• Hydraulic Lockup On Demand in any position allows faster drilling operations.
• Automatic Safety Arrest limits hook velocity and prevents equipment damagein event of drill string failure.
Model HC-800-2-17-20Working Capacity 800,000 lb (3.555 kN)Static Load Capacity 1,600,000 lb (7,110 kN)Stroke 20 ft (6.09 M) or 25 ft (7.62 M)Pressure, Max 2,400 psi (16.55 MPa)Wet Weight, (hung in derrick 113,150 lb (503 kN) (20 ft) with rod end and traveling block)Dimension “A” Fully Retracted 51 ft (15.6 M) (20 ft)Dimension “A” Fully Extended 71 ft (21.7 M) (20 ft)
Models HC-400-16-20/ and -25 Model HC-600-25 Model HC-650-20-20 / and -25Working Capacity 400,000 lb (1,779 kN) 600,000 lb (2,669 kN) 650,000 lb (2,891 kN)Static Load Capacity 1,200,000 lb (5,338 kN) 1,600,000 lb (7,117 kN) 1,600,000 lb (7,117 kN)Stroke, Max 20 ft (6.09 M) / 25 ft (7.62 M) 25 ft (7.62 M) 20 ft (6.09M) / 25 ft (7.62 M)Pressure, Max 2,400 psi (16.55 MPa) 2,400 psi (16.55 MPa) 2,400 psi (16.55 MPa)Wet Weight (hung in derrick 46,000 lb (20,865 Kg) 20 ft Stroke 67,000 (30,390 Kg) 20 ft Stroke with rod end and traveling block) 48,600 lb (22,045 Kg) 25 ft Stroke 85,100 lb (38,600 Kg) 25 ft Stroke 70,600 lb (32,024 Kg ) 25 ft StrokeDimension “A” Fully Retracted 31.1 ft (9.49 M) / 36.1 ft (11.02 M) 37.8 ft (11.54 M) 32.3 ft (9.84 M) / 37.3 ft (11.37 M)Dimension “A” Fully Extended 51.1 ft (15.59 M) / 61.1 ft (18.64 M) 62.8 ft (19.16 M) 52.3 ft (15.94 M) / 62.3 ft (18.99 M)
Compact, Efficient
THIS EQUIPMENT IS COVERED BYTHE FOLLOWING U.S. PATENT: RE29,565
Heave Compensators
The remotely-operated, manually-controlled Pipemaster®
Offshore Piperacker improves efficiency through positivemechanical control in horizontally storing, handling andracking of tubular goods. Adaptable to drill ships, semi-submersibles and mobile self-elevating platforms, thesystem semi-automatically moves drill pipe, collar and risersections to and from the rig floor for tripping operations.The Pipemaster® Offshore Piperacker provides a systemthat mechanically controls and handles pipe in adverse seastates.
Power: Hydraulic 50 HPPneumatic Shipboard air, 100 to 150 psi
(Shipboard air, 6.9 to 10.4 bars)Electric Shipboard electric, 64 KVA, 440/460V, 60 cycle
Control Remote ManualSpeed One 90 ft. stand per minute
Weight 230,000 lbs without interconnecting beams(104,328 Kg without interconnecting beams)
Capacity 20,000 ft of 5 in. drill pipe with 7 in. protector stored in 90 ft stands.Adaptors for casing 8 %/8, in. to 30 in. O.D. and riser 36 !/2 in. O.D. x 50 ft. long(6,096 M of 127 mm drill pipe with 178 mm protector stored in 27 M stands.Adapters for casing 220 mm to 760 mm O.D. and risers 7.8 M.O.D. x 15.5 M long.)
Pipe Handling Systems
Pipemaster ® OffshorePiperacker
When used in conjunction with the Pipemaster® offshorepiperacker, the bridge crane handles marine riser andcasing for drillship operations. A lift beam transfers riseror casing to the piperacker skate and track which thendelivers the riser or casing to the rig floor to be handledby the elevator and drawworks and then mechanicallystabbed over the well bore. While storage capacity isdependent on the ship’s beam and available above andbelow deck area, a typical system stows 3,000 feet (912M) of 38 inch (965 mm) diameter marine riser in 50 foot(15.2 M) lengths.
Swing Crane Bridge Crane Semi-Submersible and Jack-Up Handling SystemPower Hydraulic Electric ElectricControl Remote Manual Remote Manual Remote ManualSpeed, riser or casing One section every 3 to 4 minutes One section every 3 to 4 minutes One section every 3 to 4 minutesWeight, includes guide rails, 37,000 lbs (16,783 Kg) 80,000 lbs (36,288 Kg) 90,000 lbs (40,823 Kg)excludes support structureLength 16 ft (14,876 mm) or to suit 66 ft (20,117 mm) or to suit 100 ft (25,400 mm) or to suitWidth 61 ft (19,174 mm) 64 ft (19,507 mm) 64 ft (19,507 mm)Height 42 ft (12,801 mm) or as required 43 ft (13,106 mm) or as required 43 ft (13.106 mm) or as required
Pipe Handling Systems
Pipemaster ® Offshore Riserand Casing Bridge Crane
For use in conjunction with the Pipemaster® offshorepiperacker, the swing crane handles riser and casingfrom below-deck hold space for drillship operations. Abelow-deck crane moves riser or casing to a pick-upstation; lift beam is attached to the riser or casing whichis raised to the swing crane; the swing crane places theriser or casing on the piperacker skate and track fordelivery to the rig floor. Storage capacity depends onship’s beam and available below deck hold area; a typicalsystem stows 3,000 feet (912 M) of 38 inch (965 mm)diameter marine riser in 50 foot (15.2 M) lengths.
Pipemaster ® Offshore Riserand Casing Swing Crane
This system is specially designed to handle single drillpipe, marine riser and casing aboard semi-submersibleor jack-up platforms. This tubular goods handling systemprovides the mechanical means to move drill pipe,marine riser and casing from a horizontal racking areaon the main deck back and forth to the rig floor. Typicalsystem storage capacity is consistent with a 100 foot(30.5 M) long deck area.
Pipemaster ® OffshoreSemi-Submersible andJack-Up Handling System
Pipemaster® Pipe Tensioners are track-type tensionsystems capable of holding back on the pipeline, usingessentially constant tension characteristics. PipeTensioners absorb the curvature of the pipeline andaccommodate nominal changes in coating diameter.Available drives include electrohydraulic or diesel-hydraulic power units. Control is by solid state integratedelectronic circuitry with independent, identical electronicor hydraulic backup control. All parameters in the speed/tension curve are adjustable by easily accessible knobson the control console.
Single Pipemaster® Pipe Tensioners can be arrangedin multiple tandem units to obtain higher tension whenrequired. Welding or other work stations may be locatedbetween tandem units depending on barge installation.Pipe Tensioners can be supplied for locating on port orstarboard ramp as well as for barge center slot operation.
A B C D*** Weight****LPT 40 124 in. (3,149 mm) 264 in. (6,706 mm) 168 in. (4,267 mm) 66 in. (1,676 mm) 110,000 lbs (49,895 Kg)LPT 80-1.5 164 in. (4,165 mm) 322 in. (8,191 mm) 247 in. (6,273 mm) 59 in. (1,498 mm) 186,800 lbs (84,730 Kg)LPT 100-1.5 164 in. (4,165 mm) 364 in. (9,233 mm) 247 in. (6,273 mm) 59 in. (1,498 mm) 204,500 lbs (92,760 Kg)LPT 150-1.5 176 in. (4,470 mm) 337 in. (8,559 mm) 247 in. (6,273 mm) 59 in. (1,498 mm) 206,000 lbs (93,440 Kg)
Pipe Tension Systems
Pipemaster ® Pipe Tensioners
LPT 40 LPT 80 LPT 100 LPT 150
Tension, max 40,000 lbs (18,144 Kg) 80,000 lbs (32,287 Kg) 100,000 lbs (43,350 Kg) 120,000 lbs (54,431 Kg)Rated In-Haul / Payout 66 fpm / 66 fpm 80 fpm / 80 fpm 120 fpm / 120 fpm 90 fpm / 100 fpm
(20 mpm / 20 mpm) (24 mpm / 24 mpm) (37 mpm / 37 mpm) (27 mpm / 30 mpm)Optional* In-Haul / Payout 160 fpm / 160 fpm 200 fpm / 200 fpm 200 fpm / 200 fpm 180 fpm / 200 fpm
(49 mpm / 49 mpm) (61 mpm / 61 mpm) (61 mpm / 61 mpm) (55 mpm / 61 mpm)Pipe size, O.D. diameter rated 6 in.-30 in. (152 mm-762 mm) 8 in.-48 in. (203 mm-1,219 mm) 8 in.-48 in. (203 mm-1,219 mm) 8 in.-48 in. (203 mm-1,219 mm) max•• 50 in. (1,270 mm) 72 in. (1,829 mm) 72 in. (1,829 mm) 72 in. (1,829 mm)
• Speeds above those rated available on special order.•• Pipe sizes larger than rated diameter can be handled by changing pad type and pressure points. Engineering evaluation and approval required.
The Pipemaster® Abandonment and Recovery Winch Systems are designed forincreased control during lowering of pipe for abandonment from lay barge to seabottom. Controls and power supply integrate with Pipemaster® Pipe Tensionersystems for smooth load transfer of the highly tensioned pipeline from one systemto the other. Load transfer is accomplished in automatic tension mode,compensating for barge and pipe movement induced by heavy seas. Thissynchronized transfer can be accomplished in about fifteen seconds, theapproximate period of a single wave, under full control of the operator. Systemredundancy is designed into the Pipemaster® Abandonment and Recovery WinchSystem providing for complete control backup.
Pipemaster ® Abandonment andRecovery Winch Systems
Abandoment and Recovery/Land Piperacker
Based on the highly successful design of the offshorepiperacker, WesTech/HMD’s Pipemaster® Land Piperackeris, similarly, remotely operated for positive mechanicalcontrol of drill pipe and casing. This system incorporates aunique elevator to raise pipe from the horizontal racks toramp arms where transverse rollers position the pipelongitudinally and indexers control the movement of thepipe to the skate. The Pipemaster® Land Piperacker movesdrill pipe and casing semi-automatically from the rackingarea to and from the rig floor for drilling and “laydown”operations. The system can be housed in an enclosure forwork in the arctic, or skid mounted between standard piperacks and supplied without elevating mechanism for usein less hostile climates.
Pipemaster ® Land Piperacker
Power Hydraulic 50 HP Capacity Drill pipe: Singles up to 45 ft (13.7 M) and 6,000 lbs (2,720 Kg)Electric 64 KVA, 440/460V, 60 cycle Casing: Up to 14 in. (356 mm) diameter and 9 B\, in. (244 mm)
Control Remote manual diameter with thermocase. With adapters handlesSpeed One cycle per minute 20 in. (508 mm) diameter maximum; up to 45 ftWeight 36,000 lbs (16,330 Kg) (13.7 M) length maximum.Width 11 ft 4 in. (3,454 mm)Length 87 ft (26,518 mm) or to suit rigHeight 29 ft (8,839 mm) or to suit rig
A B C Weight**ARW 200 151 in. (3.81 M) 170 in. (4.32 M) 120 in. (3.05 M) 70,000 lbs (31,750 Kg)ARW 300 180 in. (4.57 M) 214 in. (5.44 M) 146 in. (3.71 M) 116,000 lbs (52,668 Kg)
Proprietary Information of Control Flow, Inc.- Products - 4/13/01
SECTION THREE ACTIVE COMPENSATION CIMACCIMACCIMACCIMAC
®
UNDER ENGINEERING REVIEW
Proprietary Information of Control Flow, Inc.- Products - 4/13/01
HEAVE COMPENSATORS
A - Active / I - Inactive / U - Unknown CONTROL FLOW INC.Vetco® / WesTech® / Equipment Reference List
Rig Name - Current & Owner D - Drillship S - Semisubmersible (Year Converted)
Rig Name - Old Year Built (Active) Year Retired (Inactive)
Riser Tensioner System Guideline Tensioner System
Motion Compensator
OEM
Aleutian Key/Santa Fe International -S A Aleutian Key (1976) 80K 50 RT, 80K 50 Dual RT 16K-50 GLT Single MC 400K-20 VetcoArethusa Worker/Diamond Offshore Drlg -S A Penrod Rig 73 (1982) 80K Single and Dual RT 16K GLT WesTechAtwood Eagle/Atwood Oceanics -S A Diamond M Eagle (1982) 80K Dual RT 16K GLT Single HC 650K-25 WesTechAtwood Falcon/Atwood Oceanics -S A Diamond M Falcon (1983) 80K Single and Dual RT 16K GLT Single HC 650K-25 WesTechAtwood Hunter/Atwood Oceanics -S A Diamond M Hunter (1981) 80K Dual RT 16K GLT Single HC 400K-20C WesTechAtwood Southern Cross/Atwood Oceanics -D A Southern Cross (1976) 80K Single RT 16K GLT WesTechCanmar (Dome) Explorer II/Canadian Marine -D A Canmar (Dome) Explorer II (1976) 80K Single RT 16K GLT Single HC 400K-20B WesTechCanmar (Dome) Explorer III/Canadian Marine -D A Canmar (Dome) Explorer III (1973) 16K GLT WesTechChevron - Genesis Spa/Chevron A Chevron - Genesis Spa 16K-50 GLT CFIConverted -Barge (1989) (Baruna-I) A Brinkerhoff 1 (1975) 80K 40 RT 16K-50 GLT Dual MC 400K-20 VetcoConverted -Barge (1991) A Rio Panuco (1966) 60K 40 RT 16K-50 GLT VetcoConverted -D (1978) A Glomar IV (1963) 60K 40 RT VetcoConverted -D (1987) A Navifor Norse (1976) 80K Single RT 16K GLT Single HC 400K-20A WesTechConverted -D (1989) A Glomar Coral Sea (1974) 80K 50 RT 16K-50 GLT Single MC 400K-20 VetcoConverted -D (1993) A Canmar (Dome) Explorer IV (1973) 16K GLT WesTechConverted -D (1993) A Canmar (Dome) Explorer IV (1973) Dual MC 400K-20 VetcoConverted -D (1993) A Petrel (1976) Single MC 500K-20 VetcoConverted -D (1977) (Ocean Clipper/Diamond Offs.) A Wodeco V (1976) Dual MC 400K-20 VetcoConverted -S (1988) (North Sea Pioneer) A Transworld Rig 58 (1966) 60K 40 RT VetcoConverted -S (1994) A Kan Tan III (1984) 80K 50 RT 16K-50 GLT Dual MC 400K-20 VetcoConverted -S (1994) (Petrobras XXV) A Zapata Artic Rig 36 (1984) 16K GLT WesTechDada Gorgud/Caspian Drilling Company -S A Kaspmornef/Socar (1979) 80K Single RT CFIDeepsea Ice/Deep Sea Drillships -D A Danwood Ice (1975) 80K 40 RT 16K-50 GLT Dual MC 400K-20 VetcoDoo Sung -S A Doo Sung/Korea Petroleum Dev. (1984) 80K Dual RT 16K GLT Single HC 650K-25 WesTechFalcon Duchess -D A WodecoVIII /Deepsea Duchess (1975) Dual MC 400K-20 VetcoFalcon Duchess -D A WodecoVIII /Deepsea Duchess (1975) 80K Single RT 16K GLT WesTechJack Bates/R&B Falcon -S A Zane Barnes/R&B (1986) 125K Dual RT Single HC 600K-25 WesTechJim Cunningham/R&B Falcon -S A Jim Cunningham (1982) 80K 40 Dual RT 16K-50 GLT Dual MC 400K-20 VetcoLafitt Pincay/Rigco -S A Penrod Rig 75 (1976) 80K Single RT 16K GLT WesTechMG Hulme - Tensionsers taken off & put on R&B (Kirk Rhein, Jr.) - MG Hulme now has Shaffer Tensioners / R&B Falcon -S A MG Hulme Jr. (1982) 80K 40 Dual RT 16K-50 GLT Dual MC 400K-20 VetcoOcean Baroness/Diamond Offshore Drlg -S A Aladdin (1973) 80K 50 RT 16K-50 GLT Dual MC 400K-20 VetcoOcean Epoch/Diamond Offshore Drlg -S A Diamond M Epoch (1977) Dual MC 400K-20 VetcoOcean Epoch/Diamond Offshore Drlg -S A Diamond M Epoch (1977) 80K Dual RT 16K GLT WesTechOcean General/Diamond Offshore Drlg -S A Diamond M General (1976) Dual MC 400K-20 Vetco
1 of 3 - Proprietary Information of Control Flow, Inc. - 10/14/2002 Server\C\My Documents\Quotes\Equipment Reference List A-Z
A - Active / I - Inactive / U - Unknown CONTROL FLOW INC.Vetco® / WesTech® / Equipment Reference List
Rig Name - Current & Owner D - Drillship S - Semisubmersible (Year Converted)
Rig Name - Old Year Built (Active) Year Retired (Inactive)
Riser Tensioner System Guideline Tensioner System
Motion Compensator
OEM
Ocean General/Diamond Offshore Drlg -S A Diamond M General (1976) 80K Single RT 16K GLT WesTechOcean New Era/Diamond Offshore Drlg -S A Diamond M New Era (1974) Dual MC 400K-20 VetcoOcean New Era/Diamond Offshore Drlg -S A Diamond M New Era (1974) 80K Single RT 16K GLT WesTechOcean Star/Diamond Offshore Drlg -S A Sinbad Saxon (1974) Single HC 400K-20A WesTechPeregrine VII/RB Falcon -D A Sedco 445 (Foresight Driller II) (1971) Dual MC 400K-20 Vetco
Peregrine VII/RB Falcon -D A Sedco 445 (Foresight Driller II) (1971)80K Double RT and 2 Taut Line Tensioners WesTech
Santa Fe Rig 135/Santa Fe International -S A Santa Fe Rig 135 (1983) 80K Dual RT 16K GLT WesTechSanta Fe Rig 140/Santa Fe International -S A Santa Fe Rig 140 (1983) 80K Dual RT 16K GLT WesTechScarabeo 3/Saipem -S A Scarabeo 3 (1975) Dual MC 400K-20 VetcoScarabeo 4/Saipem -S A Scarabeo 4 (1975) Dual MC 400K-20 VetcoSedco 700/Sedco Forex -S A Sedco 700 (1973) Dual MC 400K-25 VetcoSedco 700/Sedco Forex -S A Sedco 700 (1973) 80K Single RT 16K GLT WesTechSedco 710/Sedco Forex & Petrocan -S A Sedco 710 (1983) Dual MC 600K-25 VetcoSedco 710/Sedco Forex & Petrocan -S A Sedco 710 (1983) 80K Single RT 16K GLT WesTechSedco 711/Sedco Forex -S A Sedco 711 (1982) Dual MC 600K-25 VetcoSedco 711/Sedco Forex -S A Sedco 711 (1982) 80K Single and Dual RT 16K GLT WesTechSedco 712/Sedco Forex -S A Sedco 712 (1983) Dual MC 600K-25 VetcoSedco 712/Sedco Forex -S A Sedco 712 (1983) 80K Single and Dual RT 16K GLT WesTechSedco 714/Sedco Forex & Ranger -S A Sedco 714 (1983) Dual MC 600K-25 VetcoSedco 714/Sedco Forex & Ranger -S A Sedco 714 (1983) 80K Single and Dual RT 16K GLT WesTechSedco/BP 471/Sedco Forex & BP -D A Sedco/BP 471 (1978) Dual HC 800K-20 WesTechTOR Viking/KS Right Viking -S A Pentagone 82 (1973) Dual MC 400K-15 VetcoTransocean Amirante/Transocean -S A Transocean Treasure Swan (1981) 100K Dual RT CFITransocean Marianas/Transocean -S A Tharos & Polyportia/Sonat Offs. (1996) 100K Dual RT WesTechTreasure Legend/Transocean -S A Penrod Rig 77 (1983) 80K Single RT 16K GLT Single HC 400K-25 WesTechTreasure Prospect/Transocean -S A Penrod Rig 76 (1983) 80K Single and Dual RT 16K GLT Single HC 400K-25 WesTechTreasure Saga/Transocean -S A Sonat GVA 4000 (1983) 100K Single RT (now Shaffer) 16K GLT WesTechZagreb 1/Crosco -S A Zagreb 1 /INA Naftaplin (1977) 80K Dual RT CFIAccident -D I Petromar V (1963-1981) Single MC 400K-20 VetcoAccident -D (Sunk) I Glomar Java Sea (1975-1983) 80K 50 RT 16K-50 GLT Single MC 400K-20 VetcoRetired -Barge I Mission Viking (1975-1987) 80K 50 Dual RT 16K-50 GLT Single MC 400K-20 VetcoRetired -Barge I Reforma (1966-1988) 80K 50 RT 16K-50 GLT Dual MC 400K-20 VetcoRetired -Barge I Revolucion (1966-1988) 80K 50 RT 16K-50 GLT Dual MC 400K-20 VetcoRetired -Barge I Western Offshore III /Wodeco (1964-83) 80K Single RT 16K GLT WesTechRetired -Barge I Western Offshore IV /Wodeco (1966-83) 80K Single RT 16K GLT WesTech
2 of 3 - Proprietary Information of Control Flow, Inc. - 10/14/2002 Server\C\My Documents\Quotes\Equipment Reference List A-Z
A - Active / I - Inactive / U - Unknown CONTROL FLOW INC.Vetco® / WesTech® / Equipment Reference List
Rig Name - Current & Owner D - Drillship S - Semisubmersible (Year Converted)
Rig Name - Old Year Built (Active) Year Retired (Inactive)
Riser Tensioner System Guideline Tensioner System
Motion Compensator
OEM
Retired -D I Benlomond(Deepsea Lomond) (1975-1993) 80K 50 RT 16K-50 GLT Dual MC 400K-20 VetcoRetired -D I Canmar (Dome) Explorer I (1976-94) 80K Single RT 16K GLT Single HC 400K-20B WesTechRetired -D I Chancellorsville (1976-1994) 80K 40 RT 16K-50 GLT Dual MC 400K-20 VetcoRetired -D I Fredericksburg (DeepseaLomond-1975-93) 80K 40 RT 16K-50 GLT VetcoRetired -D I Glomar Atlantic (1978-1993) 80K 50 Dual RT 16K-50 GLT VetcoRetired -D I Glomar Grand Isle (1967-1988) 80K 50 RT 16K-50 GLT VetcoRetired -D I Glomar Pacific (DeepSeaPacific)(1977-92) 80K 50 Dual RT 16K-50 GLT Single MC 400K-20 VetcoRetired -D I J.W. Bates/R&B (1967-1985) Single HC 400K-20B WesTechRetired -D I Mission Exploration (1974-1980) 80K 40 RT 16K-50 GLT Single MC 400K-20 VetcoRetired -D I Ocean Hurricane (1974-1987) Single MC 400K-15 VetcoRetired -D I Pelican/Foramer (1972) 100K Single RT WesTechRetired -D I Petrobras II (1973-1989) Dual MC 500K-15 VetcoRetired -D I Protexa Rig 21 (Zapata Trader) (1975-87) 80K Single RT 16K GLT WesTechRetired -D I Regional Endeavour (1974-1987) 80K 40 RT 16K-50 GLT Dual MC 400K-20 VetcoRetired -D I Saipem Due (1973-1993) Dual MC 400K-20 VetcoRetired -D I Tainaron/Tropic Drlg(Viking Driller)(1975-92) Single HC 400K-20B WesTechRetired -S I Blue Water 3 (1966-1988) Dual MC 400K-20 VetcoRetired -S I Blue Water 4/Santa Fe Int'l. (1975-1989) 80K Single RT 16K GLT WesTechRetired -S I Neptune 7 (Pan Producer) (1969-1994) Dual MC 400K-20 VetcoRetired -S I Santa Fe Mariner 2 (1973-1987) 80K 50 RT 16K-50 GLT VetcoRetired -S I Sedneth-I (1968-1986) Dual MC 400K-20 VetcoRetired -S I Transworld Rig 61 (1970-1989) Single MC 400K-20 Vetco
U BF-1 Dual MC 600K-10 VetcoU Capalonga (1) 16K-50 GLT VetcoU Danwood Frost 80K 40 RT 16K-50 GLT VetcoU Danwood Snow 80K 40 RT 16K-50 GLT Dual MC 400K-20 VetcoU Gulf Canada Kalluk 80K Single RT 16K GLT WesTechU Marianna Single MC 60K-15 VetcoU Mendu Single MC 30K-15 VetcoU NFDS Petro Jarl 80K Single RT 16K GLT WesTechU Petro Marine Petro 3 Single HC 400K-20B WesTechU Petro Marine Petro Mar 1 Single HC 400K-20B WesTechU Surveyor 1 Single MC 60K-15 Vetco
3 of 3 - Proprietary Information of Control Flow, Inc. - 10/14/2002 Server\C\My Documents\Quotes\Equipment Reference List A-Z
31
1. General: No orders shall be considered as accepted by CON-TROL FLOW INC., AND FLOCON PRODUCTS, INC. until ap-proved at our office in Houston, Texas. These terms and condi-tions apply to all sales made by us. Any purchase order receivedby CONTROL FLOW INC., AND FLOCON PRODUCTS, INC. shallbe construed as a written acceptance of all of our terms and con-ditions of sale. Unless specifically accepted in writing, no otherterms and conditions shall apply. Additional information, specifi-cations, and recommendations may be obtained by writing us atour Houston office.
2. Terms of Payment: Our domestic terms are net 30 days af-ter shipment or offer to ship if delayed by customer’s request. Ex-port terms require a confirmed irrevocable letter of credit openedthrough a prime U.S. Bank, unless otherwise specified. Boxing,cartage, freight, insurance, handling, labor, rental and similar ex-penses are net cash upon receipt of invoice.
3. Guarantee: We warrant all products of our manufacture to befree from defects and against failure due to workmanship or mate-rials for a period of one year but no longer from date of invoice:provided, however, that our liability under said warranty shall beand the same hereby is expressly limited to repairing or furnishingfor replacement, free of charge, FOB our factory, any part of anysuch product that proves to be defective in workmanship or mate-rial under normal use and operation, and provided further thanwritten notice of such defect or failure is given to us within thirtydays from the occurrence thereof and such part is returned to usat our factory, carrying charges prepaid, within the said one yearperiod of warranty; provided, further that with respect to any partsnot wholly of our manufacture this warranty is limited in extent tothe warranty, if any, which we may have received with respectthereto from the manufacturers of any such parts and to the ac-tual extent that we are able to enforce it.
Except as above set forth, there shall be no other warranty offitness or merchantability or other warranty or liability whetherexpressed orally or in writing, or implied in fact or imposedby statute , and in no event shall we or our agents or employeesbe liable for injury or damage to any person or property whatso-ever or for any special, indirect, secondary, or consequential dam-age of any nature however arising.
4. Delivery: We endeavor to ship all materials within the timepromised by us, but do not guarantee to do so. No claims for dam-ages or delays due to failure to deliver will be allowed unless awritten agreement between both parties specifically allows forclaims against later delivery. All agreements are subject to delayscaused by strikes, lockouts, accidents, fire or other casualty, actsof God, war, insurrection, the elements, shortage of raw materialsand labor, governmental orders, or restrictions and any circum-stances beyond our control. Our responsibility ceases upon deliv-ery to any common carrier. We do not insure shipments beyondthe point of delivery to a carrier unless previously instructed bypurchase order. All materials for export are packed to the best ofour ability so that they will not be damaged, rust or deteriorate intransit but we do not guarantee against such damage.
5. Insurance: We will place insurance as nearly as possible inaccordance with the written instructions of our customers, but weassume no liability for the placing of such insurance or as to theultimate recovery in case of breakage, damage or loss.
6. Consular Invoices: No consular fees for legalizing invoices,stamping bills of lading, or other documents required by the lawsof any country or destination are included in quotations or sellingprices unless specified. If instructed in writing, we will take outconsular documents and make declarations as Agent of the pur-chaser, but assume no responsibility for any fines or other chargesimposed due to errors or incorrect declarations.
7 Change of design: We expressly reserve the right to changeor modify the design and construction of any product, in due courseof our manufacturing procedure, without incurring any obligationor liability to furnish or install such changes, modifications or im-provements on products previously or subsequently sold.
8. Prices: Prices are subject to change without notice. Our mini-mum charge per invoice is $50.00 U.S. Cost of export boxing andpreparation is based on 3% of total list price or minimum chargeat current market price.
9 Quotations: Requests for quotations should be sent to CON-TROL FLOW INC.., AND FLOCON PRODUCTS, INC., P.O. Box40788, Houston, Texas 77420, U.S.A. All quotations and sales areex-works, point of manufacture unless stated otherwise. Unlessotherwise agreed in writing, quotations are valid for 30 days fromdate of quotation. Unless otherwise agreed in writing, loading, light-erage, wharfage, freight, landing charges, dues, duties or any othercharges are not included in quotations or indicated by any pricelist. All taxes are required by law on a sale will be added to the netsales price. All prices and discounts, now in effect, or hereafterissued, are subject to change without notice.
10. Cancellations: When an order has been accepted by CON-TROL FLOW INC., AND FLOCON PRODUCTS, INC., it may notbe cancelled without our written permission. Cancellation termswill include compensation, as necessary, to us for expenses in-curred after such an order has been accepted. Orders for prod-ucts or parts of special design size or materials are not subject tocancellations after we have accepted order. Orders cancelled dueto United States Department of Commerce not granting an exportlicense are subject to cancellation charge.
11. Returns: Written permission must be obtained before return-ing material to us for credit. When written permission is acquired,shipment must be returned to location as specified via prepaidfreight. Material will be subject to our inspection before credit canbe issued. A restocking charge will be made on all orders returnedfor credit, or costs that may be necessary to return material tosalable condition. No material will be accepted for credit one yearfrom date of purchase. Products of special design or equipmentaltered to fit customer’s specifications will not be accepted for credit.
12. Compliance with Statues & Regulations: CONTROL FLOWINC., AND FLOCON PRODUCTS, INC. warrants and certifies thatin performing this order it will comply with all applicable statutes,rules, regulations and orders of the United States and of any stateor political subdivision thereof including laws and regulations per-taining to labor, wages, hours, equal opportunity (Executive Order11246) and other conditions of employment, applicable price ceil-ings, if any, and that the articles delivered hereunder shall be pro-duced in compliance with the Fair Labor Standards Act.
TERMS & CONDITIONS
