Control systems INDUSTRY Catalogue - DELTA DORE

INDUSTRY Catalogue Designing and manufacturing your solutions

Control systems

322

CONTENTSTHE DELTA DORE GROUP ....................................... 4

DESIGNING AND MANUFACTURING ..................... 6

COMMUNICATION TECHNOLOGIES ...................... 8

ROLLIA MOTORS .................................................... 10Wireless motors....................................................... 12PLC motors ............................................................... 15Hard-wired motors ................................................. 16Roller shutter charts .............................................. 17Accessories ............................................................. 18

ROLLIA MOTOR CONTROLS ................................. 19Centralized controls .............................................. 22Touch screens ........................................................ 24Computer interface ................................................ 28Mobile phone application ................................... 29Telephone remote controls ................................. 30Micromodule transmitters .................................... 31Transmitter switches ............................................ 32Receivers for roller shutters, blinds .................. 32

SELECTION GUIDE .................................................. 34

4 5

The Delta Dore group

2004 2008 2009 2011

Launch of control systems for the home

Delta Dore enters the world of home automation

Impetus of internationalisation and opening of a subsidiary in China

Reinforcement of the BMS "Building Management

System" service activity, with the acquisition of Trilogie/

Énergie Système

Subsidiary ope-ned in Italy

Acquisition of Atlantic RF: metering - RFID -

Automatic meter readingSubsidiary opened in Poland

Two subsidiaries opened in the United Kingdom and in Singapore

Home automation BUIndustry BUEMS BU*Other

TURNOVER DISTRIBUTIONBY BU:

*EMS: Energy Management Systems

Turnover share

at international level 15%

KEY INDICATORS 2011

120 M€Gross turnover

4 millionproducts manufactured

+20%growth 2010/2011

7 subsidiariesaround the world

750employees

10%

19%

31%

40%

ORGANISATION

The Delta Dore group is divided into 3 Business Units (BU) to adapt to its different customers and sales networks.

1970 1975 1987 2000

Delta Dore created by Monique and Joël Renault (electronic and telecommuni-cations sub-contracting)

Start of European development in Spainand Germany

1st load controller launched (1st controller in 1976)

and development of theheating products and services

Alarm systems launched:

acquisition of TALCO

A timeline filled with innovations, diversification of products and services, and international deployment.

KEY DATES

HOME AUTOMATIONBU

EMS*

BUINDUSTRY

BU

CENTRAL SERVICESHuman Resources, Finance, IT, Legal, Communication

R&D

Professional distribution and retail

Delta dore brand products (heating/cooling, security and control systems) available for professional distributors (electricians and heating engineers) and the general public (DIY stores).

Principle Contractors, Project owners and technical managers

Delta Dore assists their partners in their energy audit procedures, implementation of technical solutions and monitoring industrial and tertiary building performance. *EMS: Energy Management Systems

OEMDesign and manufacture of specific electronic solutions to meet the needs of international industrial customers who wish to make the most of their potential.

6 7

DESIGNING AND MANUFACTURING:PROVEN FIELDS OF EXPERTISE

DESIGNINGYOUR ELECTRONIC SOLUTIONS

Mastering development

Regulation specialistDelta Dore has over 40 years of experience in developing regulation algorithms adapted to all types of heating installations (hot water or electric, convector or underfloor heating).

Mastering transmission technologiesA team dedicated to the INDUSTRY business is made up of Technicians, Engineers and Doctoral graduates specialized in transmission technologies (infrared, radiofrequency, powerline carriers, GSM telephony, PSTN, Wi-Fi, GPRS, etc.) and protocols (X2D, X3D, KNX, IP, etc.).

Mastering designOur design skills are widely recognized. Indeed, the company has received several awards for the design and user-friendliness of its products.

Testing facilitiesWith bi-climatic, test and anechoic rooms, as well as electromagnetic compatibility and test laboratories, our top-quality facilities ensure the reliability of our products…

Manufacturing quality

High-performance production facilitiesDelta Dore has a cutting-edge, flexible production plant (SMC machines, RoHS- compatible solder wave machines, vision machines, etc.) allowing cost optimization, small and large quantities production, and ensuring consistent quality.

Modern manufacturing methodsThe company uses the Kanban and 5S methods (proven to be effective).

Quality Management SystemA team is fully dedicated to the continuous quality control of Delta Dore products.

A customizable offer to meet your specific requirements

Our sales team works closely with all company’s departments (technical, purchasing, marke-ting, etc.) in order to meet your requirements.

Every solution is fully examined through our R&D team to identify the perfect match to your specifications. In some cases, the product specifications can be defined together with your teams. We then factor in all your constraints and develop the most adapted and high- performance solutions.

We can thus provide you with the most suitable and competitive solution while maintaining excellent quality and reliability.

Specifications

Analysis, proposal and estimate

Study and product design

Industrialization

Production

Specificationscificati

AAAn llalysiii , opos llal iiis, proand estimateestim

StStSt ddudy anddd dddy aproduct designct d

Industrializationial

ProductionProduction

8 9

X2D mono-directionnal radio technologyDeveloped and patented by Delta Dore over 20 years ago, the X2D language is a communication protocol used for wireless, powerline carrier and BUS products. Delta Dore has chosen to use the 868 MHz frequency to exchange information between different applications in the home. One of the advantages of using the 868 MHz band-width is that it is regulated and, above all, stan-dardized. This means it cannot be disrupted by other radio emitting electrical appliances (e.g.: wireless headset).

X2D powerline carrier (PLC)This technology uses the existing electrical network and does not require any additional wiring. X2D does not disrupt appliances or the electric power supply thanks to its separate 132.45 KHz bandwidth.

X3D bi-directional radio technologyX3D is the high-speed radio communication protocol developed by Delta Dore. It can be used, among other things, to control a series of networked motors. The built-in meshing function allows information received by one motor to be repeated to the next, thus extending the wireless range.The feedback function ensures that theroller shutters have successfully received a command and reached the desired position. This constitutes a comparative advantage.

Open to other protocolsOur protocol expertise is not limited to X2D and X3D.Our teams can provide solutions using other communication protocols, such as KNX, LON, IP, combining them if necessary to meet the specific requirements of your application.

THE ADVANTAGES OF DELTA DORE bIDIRECTIONAL WIRELESS TECHNOLOGY

1 New radio protocol created by Delta Dore: reliability and interoperability between the products

2 The 868 MHz radio frequency avoids any risk of interference associated with a WiFi, GSM or other network

3 Range of 100 metres free field between a transmitter and a receiver or between 2 receivers associated in a meshed network

4 Increase of the original range by repetition of the wireless signal on each receiver registered in the meshed network.

5 Secure digital transmission by the rolling code function, protecting the openings from capturing of the opening order

6 Feedback from bidirectional controls

7 Each receiver can be controlled by 16 different transmitters

8 Each transmitter can control an unlimited number of receivers on each control channel

Rolling code

16max.

868 MHz

>100 m

I No risk of interference !The radio frequency used by Delta Dore (868 MHz) is protected from risk of jamming, so there is no intereference from other frequencies, including WIFI or GSM

I No health risk!As emissions are short (less than 1 second) and very weak in power, their use is safe for humans and pets.

Good to know

Short emissions

Permanent emissions

Permanent emissions

Radio wave power (W)

1 mW

600 mW

2 W

10 mW

Lundi 23 Sept.11.5°C 18:28

31

Calendrier RéglagesConsommation Scenarios Pièces

Chauffage AlarmeVolets Eclairage Automatismes

CALYBOX

COMMUNICATION TECHNOLOGIES USED bY DELTA DORE

10 11

ROLLIA MOTORS FOR ROLLER SHUTTERS

ROLLIAis Delta Dore’s range of tubular motors. The Rollia motor’s embedded electronics is the result of high-level development and enginee-ring. Our teams have taken particular care in designing a simple, functional and efficient solution for the motorization and automation of roller shutters. Underpinned by Delta Dore’s long-standing technological and innovative expertise, Rollia motors incorporate a range of functions that simplify their implementation and use.They include:> simplified learning of final positions for rapid installation,> obstruction detection for your safety,> 24-hour repetition function for complete automation of your roller shutters.

CommunicateX2D and X3D radio technology allow control systems, security and heating/cooling products to be associated to create simple, accessible and upgradeable solutions.

Create scenariosDelta Dore products enable you to automate everyday actions by programming them according to your lifestyle:> Close the roller shutters and turn off all the lights when leaving,> Program the shutters to open and close at a specific time.

Remote controlDelta Dore develops intelligent transmitters/ receivers to control doors, windows and lighting systems from a distance, making your everyday life more comfortable:> Close your shutters using your telephone,> Control your gate and garage door with the same remote control,> Control your lighting systems while sitting on the sofa.

Rollia motor

12 13

Reference No. Packed by Name Torque Control Obstruction detection

Intrusion detection

6356003 X 10 RL 5010 BO 10 Nm

WirelessBi-directional

X3DYES YES

6356004 X 50 RL 5010 BO 10 Nm

6356005 X 10 RL 5020 BO 20 Nm

6356006 X 50 RL 5020 BO 20 Nm

6356007 X 10 RL 5030 BO 30 Nm

Technical characteristics

• Power supply:230V single-phase 50 Hertz• Torque: 10, 20 or 30 Nm available• Transmission: X3D protocol• Radio frequency: 868 MHz• Input for hard-wired control• Electronic final position system• Use: intermittent• Thermal breakdown: 4 minutes• Protection index: IP44• Connection cable: 2.50 m (4 x 0.75 mm²), white• CE certification.

Features

• If locks and soft positions are available, automatic setting from the transmitter or hard-wired input

• Simplified installation• Built-in antenna• Soft stop on stop positions• Automatic compensation in case of guide rails

modification• Obstruction detection• Programmable intermediate position of the shutter• Control by wireless transmitter or by hard-wired input.

The motor is compatible with all X2D and X3D wireless transmitters (key-ring remote controls, transmitter switches, micromodules, wireless programmers, touch screens, telephone remote controls, etc.)

• Meshing function: Optimization of radio coverage for group control

• Built-in intrusion detection function (= detects a break-in attempt on the shutters)

• Feedback on the transceiver remote control• 5-year guarantee

Motor lengths

10 Nm: 483mm

20 Nm: 533mm

30 Nm: 533mm

Description• Roller shutter motor with integrated wireless receiver

WIRELESS ROLLIA MOTORSbi-directional control INNOVATIVE FUNCTIONS

Meshing function: extend your wireless rangeTo simplify installation and increase the scope of application, the radio coverage of the transceiver BO motors has been optimized using a procedure specifically developed by Delta Dore for these motors.Each motor becomes a repeater, allowing our devices to surpass the standard radio transmission limits .Your commands are always transmitted, even on installations with large areas!

Smoke detection function: improve your safetyAssociated with a wireless smoke detector, your shutters will automatically open if smoke is detected. Evacuation is made easier!

Wireless motor

Built-in intrusion detection function: increase your safetyThe ROLLIA BO motor stands out thanks to the integration of an intrusion detection function that turns your roller shutter into a separate element of the security system. Any break-in attempt on a window fitted with roller shutters is signalled to the alarm control unit while the intruder is still outside.

14 15


7011562 X 10 RL 5010 M 10 Nm

Wireless Mono-directional

X2DNO

7011563 X 50 RL 5010 M 10 Nm

7011564 X 10 RL 5020 M 20 Nm

7011565 X 50 RL 5020 M 20 Nm

7011566 X 10 RL 5030 M 30 Nm

7011507 X 10 RL 5010 MO 10 Nm

Wireless Mono-directional

X2DYES

7011508 X 50 RL 5010 MO 10 Nm

7011509 X 10 RL 5020 MO 20 Nm

7011510 X 50 RL 5020 MO 20 Nm

7011511 X 10 RL 5030 MO 30 Nm


7011525 X 10 RL 5010 FO 10 Nm

PLC YES

7011526 X 50 RL 5010 FO 10 Nm

7011527 X 10 RL 5020 FO 20 Nm

7011528 X 50 RL 5020 FO 20 Nm

7011529 X 10 RL 5030 FO 30 Nm

7011530 X 50 RL 5030 FO 30 Nm


• Power supply:230V single-phase 50 Hertz• Torque: 10, 20 or 30 Nm available• Transmission: X2D protocol• Radio frequency: 868 MHz• Input for hard-wired control• Electronic final position system• Use: intermittent• Thermal breakdown: 4 minutes• Protection index: IP44• Connection cable: 2.50 m (4 x 0.75 mm²), white• CE certification.


• Power supply: 230V single-phase 50 Hertz• Torque: 10, 20 or 30 Nm available• PLC transmission: X2D protocol• Electronic final position system• Use: intermittent• Thermal breakdown: 4 minutes• Protection index: IP44• Connection cable: 2.50 m (5 x 0.75 mm²), white• CE certification

Features

• Stop positions setting: auto/auto, auto/manual or manual/manual mode (RL 50xx M models only)

• If locks and soft positions are available, automatic setting from the transmitter or hard-wired input

• Simplified installation• Built-in antenna• Soft stop on stop positions• Automatic compensation in case of guide rails

modification• Obstruction detection (MO models)• Programmable intermediate position of the shutter• Control by wireless transmitter or by hard-wired

input. The motor is compatible with all X2D wireless transmitters (key-ring remote controls, transmitter switches, wireless programmers, telephone remote controls, etc.)

• 5-year guarantee

Motor lengths

10 Nm: 483mm20 Nm: 533mm30 Nm: 533mm

Features

• If locks and stop positions are available, automatic setting through the change-over switch

• Soft stop on stop positions• Automatic compensation in case of modification

of guide rails• Up/down control by change-over switch• Group/centralized control via PLC transmission• Obstruction detection• No extra wires necessary, the commands are sent on

the existing electrical network

• 5-year guarantee

Motor lengths

10 Nm: 483mm20 Nm: 533mm30 Nm: 533mm

Description• Roller shutter motor with integrated wireless receiver

Description• Electronic hard-wired and powerline carrier (PLC) tubular motors

WIRELESS ROLLIA MOTORSMono-directional control

PLC ROLLIA MOTORS

Wireless motor

16 17


7011519 X 10 RL 5010 F 10 Nm

Hard-wired NO

7011520 X 50 RL 5010 F 10 Nm

7011521 X 10 RL 5020 F 20 Nm

7011522 X 50 RL 5020 F 20 Nm

7011523 X 10 RL 5030 F 30 Nm

7011524 X 50 RL 5030 F 30 Nm

Features

• Stop positions setting: auto/auto, auto/manual or manual/manual mode

• If locks and stop positions are available, automatic setting through the change-over switch

• Soft stop on stop positions• Automatic compensation in case of modification

of guide rails• Up/down control by change-over switch• 5-year guarantee

Motor lengths

10 Nm: 483mm20 Nm: 533mm30 Nm: 533mm

Description• Electronic hard-wired tubular motors

HARD-WIRED ROLLIA MOTORS


• Power supply: 230V single-phase 50 Hertz• Torque: 10, 20 or 30 Nm available• Electronic final position system• Use: intermittent• Thermal breakdown: 4 minutes• Protection index: IP44• Connection cable: 2.50 m (4 x 0.75 mm²), white• CE certification

PLC motor

ROLLER SHUTTER CHARTS How to choose the correct roller shutter motor

> Calculating the weight of the apron Weight = width x height x weight/m²

> Weight per m² of the roller shutter slats37/40 mm slats 55/60 mm slats

PVC 4 kg/m2 5,5 kg/m2

Aluminium with foam 4,5 kg/m2 6 kg/m2

Wood 11 kg/m2 -

> According to the shaft, slat height and calculated weight, choose the motor on the chart that corresponds to the height of your apron

> These recommendations are non-binding and may be adapted by each manufacturer to their products.

37/40 slatsShutter height up to 1.5 m

RL5010 RL5020 RL5030

Ø 53-54 21 kg 44 kg 66 kg

Ø 60 19 kg 39 kg 59 kg

Ø 64 18 kg 37 kg 55 kg

Ø 70 17 kg 36 kg 54 kg

Ø 80 16 kg 34 kg 50 kg

Shutter height up to 2.5 m

RL5010 RL5020 RL5030

Ø 53-54 17 kg 37 kg 55 kg

Ø 60 16 kg 33 kg 50 kg

Ø 64 15 kg 33 kg 48 kg

Ø 70 15 kg 32 kg 48 kg

Ø 80 14 kg 30 kg 46 kg


RL5010 RL5020 RL5030

Ø 53-54 15 kg 34 kg 51 kg

Ø 60 15 kg 31 kg 46 kg

Ø 64 15 kg 31 kg 46 kg

Ø 70 14 kg 30 kg 45 kg

Ø 80 13 kg 28 kg 43 kg

55/60 slatsShutter height up to 1.5 m

RL5010 RL5020 RL5030

Ø 60 15 kg 32 kg 48 kg

Ø 64 15 kg 31 kg 47 kg

Ø 70 14 kg 29 kg 44 kg

Ø 80 14 kg 29 kg 44 kg


RL5010 RL5020 RL5030

Ø 60 14 kg 31 kg 47 kg

Ø 64 14 kg 29 kg 44 kg

Ø 70 13 kg 29 kg 44 kg

Ø 80 13 kg 28 kg 42 kg


RL5010 RL5020 RL5030

Ø 60 13 kg 29 kg 43 kg

Ø 64 13 kg 27 kg 40 kg

Ø 70 12 kg 27 kg 40 kg

Ø 80 12 kg 26 kg 39 kg

18 19

50 x 1.5

ZF54x0.5Deprat

53

ZF64x0.5

ZF80x1

60x0.6

70

50

Deprat62

ACCESSORIESROLLIA motor brackets

ACCESSORIESROLLIA motor brackets and adapters

Traditional roller shutters

Characteristics Reference No.

Standard metal bracket 30 NmMounting: 48-60 mm, Ø 6 mm tapped 7021351Metal bracket 30 NmMounting: 48, 60, 70, 90, 94, 100 mm 7021353Plastic bracket with holding clip 30 NmMounting: 44-48 mm Ø 5 mm - 90 mm Ø 6 mm 7011544Plastic bracket for ZF Tradi Express, max. torque 20 NmMounting: 90 mm Ø 4 mm 7011555

built-on shutters


Plastic bracket with holding clip 30 Nm(ZF Alureno 137-205; aluminium endcap) 7011544Metal bracket 137 aluminium casing - 30 Nm 7011550Metal bracket 150 aluminium casing - 30 Nm 7011551Metal bracket 165 aluminium casing - 30 Nm 7011552Metal bracket 180 aluminium casing - 30 Nm 7011553Metal bracket 205 aluminium casing - 30 Nm 7011554Plastic bracket for ZF Polyrapide casing; max. torque 20 Nm - Mounting: 90 mm Ø 4 mm 7011555Metal bracket for MPM KHERTY casing 30 Nm

Mounting: 115 mm 7011576

Tunnel housing shutters


Plastic bracket with holding clip - 30 NmCOFFRELITE, KHERTY, FIXOLITE casing 90 mm distance between centres, Ø 5 mm 7011544Metal bracket - COFFRELITE, KHERTY, FIXOLITE casing Mounting distance between centres: 90 mm Ø 5 mm 7021353Metal bracket - mounting distance between centres 44 mm Ø 5 mm; 48 mm Ø 6 mm 7021357

built-on shutters

Tube adapter kit Reference No.

Ø 50 smooth 7011537Ø 50 Octagonal 7011582Ø 53 Deprat and Ø 54 Zurfluh Feller 7011538Ø 60 Octagonal 7011539Ø 62 Deprat 7011540Ø 64 Zurfluh Feller 7011541Ø 70 Octagonal 7011542Ø 80 Zurfluh Feller 7011543

built-in roller shutters


Mounted outside casing; max. torque 20 Nm 7011555for Deceuninck STORBOX 3000; SPPF+ casing; etc. Bracket for casing Rehau 160/190 7011587Metal bracket new casing Rehau 230 7011560

bRACKETS

ADAPTERS

7021351

7011544

7011544

7021353

7011550 à 7011554

70115447011560

7011537 7011540

7011582 7011541

7011538 7011542

7011539 7011543

7011555

7021357

70115557011587

7011576

7021353

7011555

20 21

ROLLIA MOTOR CONTROLSREMOTE CONTROLS

Features

• Up/Down/Stop function• Favourite position function: used to reach your fa-

vourite position (e.g.sun-protecting position)• Scenario function: for individual or group control +

2 scenario buttons for the simultaneous control of several systems, for example closing the roller shutter and turning the inside lighting on.

• 24-hour repeat function: automatically moves the roller shutters to the defined position (high, low or favourite), every 24 hours.


• Power supply: CR2032 lithium battery (supplied)• Battery life: 4 years under normal use• Transmission frequency: 868 MHz• Wireless range: 100 to 200 m outside

Dimensions

45 x 125 x 15 mm

Features

• Up/Down/Stop function• Favourite position function: used to reach your

favourite position (e.g.sun-protecting position) • Scenario function: for individual or group control

+ 2 scenario buttons for the simultaneous control of several systems, for example closing the roller shutter and turning the inside lighting on.

• 10-channel feature: individual control of up to 9 channels + 1 channel for group control.

• 24-hour repeat function: automatically moves the roller shutters to the defined position (high, low or favourite), every 24 hours.



Dimensions

45 x 125 x 15 mm

Features

• Up/Down/Stop functions• Favourite position function: used to reach your

favourite position (e.g.sun-protecting position)• Group selection: for general control of up to 16

motors as well as the control of individual motors and/or subgroups (9 groups)

• Meshing function: ensures that the command is sent from one motor to the other and verifies that all motors have received the command. Each motor acts as a repeater, thus extending the wireless range.

• Feedback: confirms whether or not the motors have all received the command and reached the desired position.



Dimensions

45 x 129 x 17 mm

Features

• Up/Down/Stop function• Favourite position function: used to reach your fa-

vourite position (e.g.sun-protecting position)• 2-channel feature: controls 1 motor + 1 group

of motors or 2 motors individually.• 24-hour repeat function: automatically moves

the roller shutters to the defined position (high, low or favourite), every 24 hours.



Dimensions

45 x 125 x 15 mm

X2D 1-channel 5-button remote control (wall holder supplied) X2D 10-channel 5-button remote control

(wall holder supplied)

X3D 10-channel 4-button remote controlX2D 2-channel 5-button remote control (wall holder supplied)

X2D 1-CHANNEL 5-bUTTON REMOTE CONTROL X2D 10-CHANNEL 5-bUTTON REMOTE CONTROL

X3D 10-CHANNEL 4-bUTTON REMOTE CONTROLX2D 2-CHANNEL 5-bUTTON REMOTE CONTROL

Reference number

X3D 10-channel 4-button remote control 6351122

Reference number


Reference number


Reference number


22 23

WIRELESS CENTRALIzED CONTROL WITH DISPLAY CENTRALIzED CONTROL WITH DISPLAYwith X2D wireless or powerline carrier technology for roller shutters

Features

• Centralized and group controlUp/Down control for 9 groups of receivers + all receivers or ON/OFF control for 9 groups of receivers + all receivers

• Activation or deactivation of 24h repetition function2 possible scenarios

• 3 control buttons to access the controls• LCD display


• Power supply: two LR03 alkaline batteries (supplied)• Battery life: 2 years• Up to 8 transmitters for one receiver

Dimensions

80 x 80 x 23mmCentralized control with display

Comparative advantage• Compatible with different X2D and X3D receivers: - ROLLIA motors - Roller shutter receiver - Receiver micromodules - Receiver switches - Wall-mounted receivers

Comparative advantage• The centralized control can be installed and moved around according to your requirements without any additional wiring.• The wireless version is compatible with X2D and X3D receivers.

Features

• 4-zone control + 1 group control• Programming mode: roller shutters can be programmed

to automatically open and close on a weekly cycle for each zone

• Manual mode: roller shutters can be controlled manually for each zone Up/Down/Stop: wireless version Up/Down: powerline carrier version

• Shutdown mode: deactivates all programmed functions• Astronomical function: raises and lowers the roller shutters

following the sunrise and sunset calendar (European pre-programmed and re-adjustable time zones).

• Random function: varies the time (+/- 15 min) at which rol-ler shutters are raised and lowered to simulate occupancy.

• Renaming the zones: the name of each zone can be custo-mized (e.g. rename Zone 1 as Living Room, etc.)

• The next automatic raise/lower operation can be inhibited by using local override on the individual control


Wireless version• Power supply: LR03 batteries (supplied)• Battery life: over 2 years under normal use• Transmission frequency: 868 MHz• Wireless range: 100 to 200 m outside

Powerline carrier version• 230V, 50 Hz mains power supply

Dimensions

80 x 134 x 22 mm

X2D wireless or powerline carrier centralized control with clock

for roller shutters

Reference number

Wireless centralized control with display 6351034

Reference number

X2D wireless centralized control with clock 7719998X2D PLC centralized control with clock 7719999

24 25

Control system touch screenFunction: control and programming

TYXIA 3000


• Backlit screen • Colour touch screen 480 x 272 pixels• Settings: minute/hour/day• 14 languages: FR / EN / ES / NL / IT / DE, etc.• Program copy feature • Configuration lockable with an installer code • System monitoring feedback• Power supply not included• Complete with:

– 1 flush-mounting box – 1 spacer strip – 1 base unit for mobile installation

Dimensions:

– Wall-mounted: H 119 x W 174 x D 35 mm – Spacer strip: H 139 x W 192 x D 10 mm – Flush-mounting box: H 112 x W 171 x D 40 mm

Features

• Multifunction control system programmer: perfect for wireless control of lighting, shutters, blackout blinds, projector screens

• Number of control system application controls:- 32 roller shutter or motorised blackout blind control channels - 32 lighting control and dimming channels - 32 control system control channels e.g. sprinkler system, electric gate and garage doors- 16 scenario control channels

• Shows the control systems of up to 16 designated rooms in the building

• Automatic registration of the receivers in mesh networks• Navigation or configuration help icon • 48 weekly programs (astronomical or not) can be associated

on the applications • Programming of up to 6 commands or switchovers per day• Annual calendar for creating specific overrides, for example:

- holidays with users present - days of user’s absence

• With the scenario function, you can save a group of control system receivers in a defined position

Complete your installation

• Add other receivers: – TYXIA 4630 for roller shutters/ motorised blinds – TYXIA 4610/TYXIA 4811/TYXIA 4801 for lighting – TYXIA 4840/4850 for light dimming – TYXIA 4600/4620 for control systems – TYXIA 6410 for gates – Wireless outdoor temperature sensor

More information on: www.deltadore.com

Examples of applications using the TYXIA 3000

On/Offlighting ofneon signs

Electricgates

Dimmablelighting

Roller shutters Sprinklersystems

Blackout blinds Projection screen

Reference number

TYXIA 3000 6351161Flush-mounted power supply 6700042Modular power supply 6700041 Multiplug power supply* 6700081

26 27

Home automation touch screenFunction: control and programming of control systems and heating, alarm controlsTYDOM 4000

Reference number

TYDOM 4000 6700070 Flush-mounted power supply 6700042Modular power supply 6700041 Multiplug power supply* 6700081 Backup power supply** 6700043 Wireless outdoor sensor 6700036

* used only with optional table base ** recommended with alarm system


• Radio frequency 868 MHz• Backlit screen • Colour touch screen 480 x 272 pixels• Compatible with the mesh networking feature • Settings: minute/hour/day • 14 languages: FR / EN / ES / NL / IT / DE, etc.• Program copy feature• Configuration lockable with installer code • System monitoring feedback• Automatic or manual setting of summer / winter time• Power supply not included• Supplied with:

– 1 flush-mounting box – 1 spacer strip – 1 base unit for mobile installation – 2 RFID badges

Features

• Multi-activity wireless programming and control: heating, control systems, lighting, alarm, etc.

• Programming of up to 8 heating or cooling zones depending on the type of compatible installation:- Boiler or irreversible heat pump in heating mode- Pilot wire electric heater in heating mode- Reversible heat pump in heating and cooling mode

• Number of control system application controls:- 32 roller shutter or motorised blackout blind control channels - 32 lighting control and dimming channels - 16 scenario control channels - 32 control system control channels: sprinkler system, electric gate and garage doors

• Enables full alarm control or control of certain operating modes, as well as alarm deactivation.

• Enables the alarm to be programmed and customised • Displays alarm statuses• Shows the control systems of up to 16 designated rooms in

the building• Automatic registration of the receivers in the mesh network• Navigation or configuration help icon• 48 weekly programs (astronomical or not) can be associated

on the Control systems or Heating/Cooling applications • Programming of up to 6 commands, switchovers

or temperature setting levels per day • Annual calendar for creating specific overrides, for example: • holidays with users present• days of absence • Display of the outside temperature associated with a

dedicated wireless sensor• With the scenario function, you can save a group of control

system receivers on one and the same icon: e.g. departure icon: close roller shutters, turn off the lights, switch on the alarm system, turn down the heating

Dimensions:

– Wall-mounted: H 119 x D 174 x D 35 mm – Spacer strip: H 139 x D 192 x D 10 mm – Flush-mounting box: H 112 x D 171 x D 40 mm


• TYXIA range receivers • TYXAL alarm control unit: CSX 40, CSTX 50, CSX 50,

CTX 60More information on: www.deltadore.com

Examples of applications using the TYDOM 4000

Heating and air conditioning

Dimmable lighting

Electric gates

TYXAL alarm control unit

Sprinkler systems

Ventilation or speed 2 of controlled mechanical ventilation

On/Off lighting of neon signs

Blackout blinds

Domestic Hot Water

Roller shutters

28 29

Local PC

IP camera

ADSL router/modem

TYXIA 463 micromodule

Gate

TYXIA 461 micromodule

Single switch Roller

shutter

TYXAL alarm control unit

CALYBOX wireless heating/cooling control

Computer interface for local control of home applications via a PC

TYDOM 350 PC


• Radio frequency 868 MHz• Wireless range of at least 100 metres outside • 230 V, 50 Hz power supply (transformer supplied) • Up to 4 IP camera (jpeg format) inputs• 2 m RJ45 cable supplied

Dimensions:

H 82 x L 108.5 x D 19 mm


• TYXIA control system receivers range • TYXAL wireless alarm rangeMore information on: www.deltadore.com

Example of application with TYDOM 350 PC

Mobile phone application " My Home " Compatible with Delta Dore GSM phone transmitters and alarm control units

This application allows you to use your Smartphone to control your installation remotely: Roller shutters, lighting, alarm, heating…

This application requires:- Minimum Androïd 1.5 version - GSM phone transmitter with an SMS SIM card

Heating

Alarm

Control systems

Scenarios

I Command up to 4 individual control systems: roller shutters, lighting, gates, garage doors,

I Switch on/off alarm system,

I Control heating system,

I Create scenarios to control simultaneously several home automation products,

I Receive system information status (roller shutters, alarm, temperature…),

I Control Domestic Hot Water in Automatic or STOP mode.

When associated with Delta Dore wireless home automation products, the « My Home » application offers the following features:

Reference number

TYDOM 350 PC 6700044

Features

• Centralizes multiple home applications via a PC (heating, control systems, alarm, etc.)

• Controls home automation applications using X2D and X3D wireless protocol via a PC

• Uses an Internet Explorer type browser (smart phone, PDA, panel PC, etc.)

• Multiple uses: – heating in 8 zones or 8 rooms – 8 control system channels or groups per application or

scenario (lighting, roller shutters and various control systems)

– alarm On/Off + 4 partial zones – consumption information feedback – transferring jpeg images from the IP camera

• This http server is connected to the local area network via an RJ45 cable

• Presentation in form of a control panel with menus for each area of application

30 31

Telephone remote controls Micromodule transmitter for roller shutter

TYXIA 2700 AND TYXIA 2630

Features

• Control from a landline or mobile phone• Can be used with a telephone answering machine• Protection by access code

GSM and PSTN transmitters only• Remote control of up to 4 control systems (roller

shutters, lighting, etc.)• Alarm activation/shutdown• Check system status info


PLC telephone remote control• 2-channels PLC control• Supplied with one RJ11 telephone socket adaptor and

telephone cord

GSM and PSTN telephone transmitter• Frequency: 433/868 MHz• Wireless range: 200 to 300 m outside depending on environment• Power supply: 4 x 1.5 V alkaline batteries, type LR14• Battery life: 2 years under normal use

Dimensions

PLC telephone remote control: 140 x 70 x 70 mmGSM and PSTN transmitters: 155 x 95 x 53 mm

PLC telephone remote control

Telephone transmitter(GSM and PSTN)

Features

• Controls Raise/Lower for 1 roller shutter channel with shutter switch


• 1 or 2 control channels depending on the product• Three pre-wired cables for connection to the switch

with local switch, push button or Raise/Lower control • Unlimited number of associated receivers• Power supplied by a CR2032 lithium battery (supplied)• Battery life: 3 years

Dimensions:

H 40 x W 40 x D 11.2 mm


• 1 or 2 control channels depending on the function• Three pre-wired cables for connection to the switch

with local switch, push button or Raise/Lower control • 1 hard-wired live input with detector or push button• Unlimited live recording or 16 mesh networking receivers• Operating temperature: -5 to 40 °C• 230V power supply with live and neutral

Dimensions

H 50 x W 47 x D 23 mm

Features

• Used for the wireless control of hard-wired roller shutters• Control options:

– 2 lighting channels with double switch or push button – 1 light dimming channel with double push button – 2 scenario channels with double push button – 1 roller shutter channel with shutter switch

• Hard-wired control input with live input from a detector e. g. change a hard-wired outdoor motion detector into a wireless transmitter detector for controlling remote lighting

• With the scenario function, you can save a group control for dedicated receivers in a defined position:

– On/Off for lighting receivers – Raise/Lower position for shutter receivers

TYXIA 2700

Single or double two-way switch

TYXIA 2700

Hard-wiredoutdoor motion

detector

TYXIA 2630

Lowerswitch

Raiseswitch

Single (raise, lower)

TYXIA 2700 Powered transmitter

TYXIA 2630

TYXIA 2700

TYXIA 2630

Reference number

PLC telephone remote control 7719991GSM telephone transmitter 6469944PSTN telephone transmitter 6469941

Reference number

TYXIA 2630 6351093

Reference number

TYXIA 2700 6351096

32 33


• 1 or 2 control channels depending on the product• Unlimited number of associated receivers• Power supplied by a CR2032 lithium battery (supplied)• Battery life: 3 years • Not compatible with the mesh networking feature • Index of protection: IP 40- IK04

Dimensions

H 40 x W 40 x D 11.2 mm

Features

• Wall-mounted switches that can be fixed or glued to any surface: wall, furniture, window, wood...

• Perfect for installing on the partition of the frame of a pocket door

• TYXIA 231: controls 2 lighting or control system channels in On/Off mode

• TYXIA 232: controls 2 scenario channels• TYXIA 233: Raise/Lower control: 1 roller shutter channel

or 1 light dimming channel• With the scenario function, you can save a group control for

dedicated receivers in a defined position: – On/Off for lighting receivers – On/Off for light dimming receivers – Raise/Lower position for roller shutter receivers


• Add other receivers to the dedicated transmitter:

– TYXIA 4630 for roller shutters – TYXIA 4610/TYXIA 4811/TYXIA 4801 for

lighting – TYXIA 4840/4850 for light dimming – TYXIA 4600/4620/6410 for control systems

More information on: www.deltadore.com

TYXIA 231 / 232 / 233

Transmitter switchesFunction: lighting, dimming, control system, scenario, roller shutter controls

Lowerlive

Raiselive

230 Vpowersupply

TYXIA 4630

Rollershutter

TYXIA 231

Features

• The receiver gives you control of a roller shutter from one or more mobile or fixed wireless transmitters

• Option to control a roller shutter motor, an awning or an electric projection screen

• Local Raise/Lower/Stop control


• 1 control channel for 1 roller shutter motor with electronic or mechanical limit switch

• Installation possible in a flush-mounting box: - behind a roller shutter switch, - in an airtight flush-mounting box by the shutter casing or in an airtight junction box

• 230V power supply with live and neutral • 2 Raise/Lower powered contact outputs for motor 20 Nm

or 0.8 A max• Three pre-wired cables for connection to the local

shutter switch

Dimensions

H 45 x W 38 x D 23 mm

Features

• Used for controlling hard-wired roller shutters• Receives Up/Down commands from TYXIA transmitters• Centralized control available + local control• The housing receiver fits in the roller shutter housing


• 230 V, 50 Hz power supply, +/-10%• Power consumption: 1 VA• Maximum power: 2A 230 Veff• Radio frequency 868 MHz (standard EN 300 220)• Radio range 100 to 300 meters outside depending on the

associated equipment (the range can be altered depending on the installation conditions and the electromagnetic environment).

• Number of transmitters that may be associated with the receiver: 16 max.

• Index of protection: IP44-IK04

Switch(raise, off, lower)

Lower live

230 V powersupply

Raiselive

Rollershutter

Yellow

White

Green

TYXIA 4630, HOUSING RECEIVER

Receivers for roller shutters, blinds

TYXIA 4630 Roller blind receivers

Housing receiver

TYXIA 231

TYXIA 232

TYXIA 233

Dimensions

115 x 63 x 21 mm

TYXIA 4630

HOUSING RECEIVER

Reference number

TYXIA 231 6351333TYXIA 232 6351334TYXIA 233 6351335

Reference number

Housing receiver 7729922

Reference number

TYXIA 4630 6351102

34 35

SELECTION GUIDETable of compatibility between X2D transmitters and receivers and the ROLLIA motor range

Reference

Bi-directional wireless motor (BO)

Mono-directional wireless motor (MO)

Mono-directional wireless motor (M)

PLC motor (FO)

Housing receiver

Receiver micro-module

Tran

smit

ters

1 channel mono-directional remote control 7719989



10 channel bi-directional remote control 6351122

Wireless centralized control with display 6351034

Wireless centralized control with clock 7719998

PLC centralized control with clock 7719999

Tyxia 3000 touch screen 6351161

Tydom 4000 touch screen 6700070

Wireless GSM telephone remote control 6469944

PLC telephone remote control 7719991

Transmitter micromodule 6351096

Func

tion

s

Obstacle detection

Built-in intrusion detection

Shutter opening in case of fire

Meshing function

Compatible

Incompatible

DELTA DORE Home automation range

I Dim the lights to create different atmospheres

I Secure your home

I Control the heating,cooling

I Centralize control systems (Departure/Arrival scenarios)

I Add new control points e.g. create a wireless two-way switch

I Program lighting, alarm, roller shutters, heating, etc.

Explore the full DELTA DORE product range on www.deltadore.com

More than 8 millionDELTA DORE wireless products in use globally.

3 million homes equipped with Delta Dore products

7000 tertiary and industrial sitesbenefit from our Building Management System services and products.

COM

3700

473

- Pho

to c

redi

ts: M

anue

l Cla

uzie

r / M

CP P

rom

otio

n - S

tudi

o Qu

inze

Mill

e - C

reat

ion:

w

ww

.pol

lens

tudi

o.fr

Th

is c

atal

ogue

is p

rint

ed o

n pa

per f

rom

sus

tain

ably

man

aged

fore

sts.

Del

ta D

ore

rese

rves

the

righ

t to

mod

ify th

ese

char

acte

rist

ics

wit

hout

pri

or w

arni

ng.

www.deltadore.com

Delta Dore - Industry business Unitbonnemain - 35270 Combourg - FranceTel. +33 (0)2 90 10 30 19Fax +33 (0)2 23 16 00 [email protected]

Smart controls for a better world

An international process2 production sites in France and 7 commercial subsidiaries outside of France.

SITES

PARIS2 commercial offices

LANDAUGermany

BEIJINGChina

SINGAPORE Singapore

ÉTRELLESAtlantic RF

MORTAGNE Énergie Système

MEYLANTrilogie

LONDON United Kingdom

TURINItaly

BARCELONASpain

KRAKOWPoland

BONNEMAINDelta Dore headquarters

Production plant

Documents

Control systems INDUSTRY Catalogue - DELTA DORE