Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
7200
7300
7350
7400
7600
7400U
7600U
WipeDown
LowPressure
Wash Down
Cleaning Method
HighPressure
Water Dry WetSoap/Water
DilutedBleach
orAlcohol
FoamingCaustic
Type of Cleaning Agent
BeltLifters
CleanOut
WindowsTip Up
Tail
CompleteTool-less
Disassembly
Sanitary Features
Environment
EnvironmentFDA Bissc USDARed Meat& Poultry
Highest Approvals
Belt Type FrameConstruction
Belt Width ConveyorLengths
Offering
Belt Single PieceStainless Steel
Single PieceStainless Steel
TIG WeldedStainless Steel
ContinuousTIG Welded
Stainless SteelContinuousTIG Welded
Stainless Steel
ContinuousTIG Welded
Stainless SteelContinuousTIG Welded
Stainless Steel
Belt
1.75” - 18”
1.75” - 18”
4” - 36”
2’ - 18’
2’ - 18’
3’ - 83’
Straight
Straight
Straight/Curve
6” - 60” 3’ - 83’Straight/Curve/
Z-FrameStraight/Curve/
Z-Frame6” - 60” 3’ - 40’
6” - 36” 3’ - 83’Straight/Curve/
Z-FrameStraight/Curve/
Z-Frame6” - 36” 3’ - 40’
ModularPlastic
Belt
ModularPlastic
ModularPlastic
PositiveBelt Drive
Con
veyo
r Se
lect
ion
Ch
art
✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓
✓
✓
✓
✓
✓
✓
✓ ✓
✓ ✓
From packaging to processing, Dorner has the food industry covered. By offering three series of sanitary conveyors – AquaGard®, AquaPruf® and AquaPruf® Ultimate – Dorner can meet virtually any need. To identify the series best for you, simply locate your market and application in one of the four charts below. You can then utilize the chart stretching along the bottom of the page to select your specific conveyor model.
AquaGard®
PACKAGED COOKED RAW
BAKERY • SNACK FOODS • CONFECTIONARY
APPLICATION
RECOMMENDEDPLATFORM
MARKET
PACKAGED COOKED RAWAPPLICATION
RECOMMENDEDPLATFORM
MARKET FRUITS • VEGETABLES • NON-PROTEIN READY-TO-EAT
AquaGard® AquaPruf®
PACKAGED COOKED RAWAPPLICATION
RECOMMENDEDPLATFORM
MARKET PROTEINS • DAIRY • READY-TO-EAT W/PROTEIN
AquaPruf®AquaPruf®
Ultimate
PACKAGED PROCESSED RAW MATERIALSAPPLICATION
RECOMMENDEDPLATFORM
MARKET
AquaGard® AquaPruf®
MEDICAL • PERSONAL CARE • PHARMACEUTICAL
Cleaning Method Type of Cleaning Agent
Wipe Down
Wash Down
WaterSoap/Water
Diluted Bleach or Alcohol
Foaming Caustic
Environment
Low Pressure
High Pressure Dry Wet
7350 • • • • • • •
7360 • • • • • • •
7400 • • • • • • • • •
7600 • • • • • • • • •
7400U • • • • • • • • •
7600U • • • • • • • • •
Sanitary Features
Belt Lifters
Clean Out
WindowsTip Up
Tail
Complete Tool-less
Disassembly
Approvals
Belt TypeFrame
Construction OfferingFDA Bissc
USDA Red Meat & Poultry
• • Modular Plastic TIG Welded Stainless Steel Straight/
Curve/Z-Frame
• • • Belt TIG Welded Stainless Steel Straight/Z-Frame
• • • • • Modular Plastic
Continuous TIG Welded Stainless Steel
Straight/ Curve/Z-Frame
• • • • • Belt Continuous TIG Welded Stainless Steel
Straight/ Z-Frame
• • • • • • Modular Plastic
Continuous TIG Welded Stainless Steel
Straight/ Curve/Z-Frame
• • • • • • Positive Belt Driven
Continuous TIG Welded Stainless Steel
Straight/ Z-Frame
ULTIMATE
ULTIMATE
2
7200
7300
7350
7400
7600
7400U
7600U
WipeDown
LowPressure
Wash Down
Cleaning Method
HighPressure
Water Dry WetSoap/Water
DilutedBleach
orAlcohol
FoamingCaustic
Type of Cleaning Agent
BeltLifters
CleanOut
WindowsTip Up
Tail
CompleteTool-less
Disassembly
Sanitary Features
Environment
EnvironmentFDA Bissc USDARed Meat& Poultry
Highest Approvals
Belt Type FrameConstruction
Belt Width ConveyorLengths
Offering
Belt Single PieceStainless Steel
Single PieceStainless Steel
TIG WeldedStainless Steel
ContinuousTIG Welded
Stainless SteelContinuousTIG Welded
Stainless Steel
ContinuousTIG Welded
Stainless SteelContinuousTIG Welded
Stainless Steel
Belt
1.75” - 18”
1.75” - 18”
4” - 36”
2’ - 18’
2’ - 18’
3’ - 83’
Straight
Straight
Straight/Curve
6” - 60” 3’ - 83’Straight/Curve/
Z-FrameStraight/Curve/
Z-Frame6” - 60” 3’ - 40’
6” - 36” 3’ - 83’Straight/Curve/
Z-FrameStraight/Curve/
Z-Frame6” - 36” 3’ - 40’
ModularPlastic
Belt
ModularPlastic
ModularPlastic
PositiveBelt Drive
Con
veyo
r Se
lect
ion
Ch
art
✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓
✓
✓
✓
✓
✓
✓
✓ ✓
✓ ✓
From packaging to processing, Dorner has the food industry covered. By offering three series of sanitary conveyors – AquaGard®, AquaPruf® and AquaPruf® Ultimate – Dorner can meet virtually any need. To identify the series best for you, simply locate your market and application in one of the four charts below. You can then utilize the chart stretching along the bottom of the page to select your specific conveyor model.
AquaGard®
PACKAGED COOKED RAW
BAKERY • SNACK FOODS • CONFECTIONARY
APPLICATION
RECOMMENDEDPLATFORM
MARKET
PACKAGED COOKED RAWAPPLICATION
RECOMMENDEDPLATFORM
MARKET FRUITS • VEGETABLES • NON-PROTEIN READY-TO-EAT
AquaGard® AquaPruf®
PACKAGED COOKED RAWAPPLICATION
RECOMMENDEDPLATFORM
MARKET PROTEINS • DAIRY • READY-TO-EAT W/PROTEIN
AquaPruf®AquaPruf®
Ultimate
PACKAGED PROCESSED RAW MATERIALSAPPLICATION
RECOMMENDEDPLATFORM
MARKET
AquaGard® AquaPruf®
MEDICAL • PERSONAL CARE • PHARMACEUTICAL
Cleaning Method Type of Cleaning Agent
Wipe Down
Wash Down
WaterSoap/Water
Diluted Bleach or Alcohol
Foaming Caustic
Environment
Low Pressure
High Pressure Dry Wet
7350 • • • • • • •
7360 • • • • • • •
7400 • • • • • • • • •
7600 • • • • • • • • •
7400U • • • • • • • • •
7600U • • • • • • • • •
Sanitary Features
Belt Lifters
Clean Out
WindowsTip Up
Tail
Complete Tool-less
Disassembly
Approvals
Belt TypeFrame
Construction OfferingFDA Bissc
USDA Red Meat & Poultry
• • Modular Plastic TIG Welded Stainless Steel Straight/
Curve/Z-Frame
• • • Belt TIG Welded Stainless Steel Straight/Z-Frame
• • • • • Modular Plastic
Continuous TIG Welded Stainless Steel
Straight/ Curve/Z-Frame
• • • • • Belt Continuous TIG Welded Stainless Steel
Straight/ Z-Frame
• • • • • • Modular Plastic
Continuous TIG Welded Stainless Steel
Straight/ Curve/Z-Frame
• • • • • • Positive Belt Driven
Continuous TIG Welded Stainless Steel
Straight/ Z-Frame
ULTIMATE
ULTIMATE
3
A program of action, support and service that make the customer’s
choice Smart and Fast
Application Hotline: 800-351-8712A direct line to our engineers, where customers can call to discuss applications and options.
Industry leading 10 year limited warrantyThe longest warranty being offered in the conveyor industry, this reduces the total cost of ownership.
Shortest lead time in the conveyor industryNo other company can deliver custom sized and application ready conveyors faster than Dorner.
Conveyor TyPeLeAd TIme
(iN DAys To ship)*
ALumInum exTruSIon
v-Guided Belt 3
modular Belt 5
STAInLeSS STeeL
v-Guided Belt 10
modular Belt 10
* Applies to products configured in E-Pricer.
4
Service Hotline: 888-417-3515An after hours hotline, where customers can call and get help troubleshooting conveyors from a member of Dorner’s FiT team of service experts. Dorner’s service never sleeps.
Get FIT and Stay FIT visitsA support program to ensure equipment is installed correctly, and that existing equipment is maintained for optimal performance.
FIT replacement Partsoriginal equipment, wear and maintenance parts from Dorner, that will add conveyor life, maximize production time and ensure the customer’s warranty is maintained.
FIT TrainingA custom designed training course for the customer’s engineers and maintenance personnel that ensures proper conveyor maintenance and safety that optimizes conveyor performance.
5
Specifications:• Flat and Cleated Belt models
• Loads up to 60 lbs* (27 kg)
• Belt speeds up to 264 ft/min (81 m/min)
• Belt widths: 1.75” (44 mm) to 18” (457 mm)
• Conveyor lengths: 2’ (610 mm) to 18’ (8,486 mm)
• Cleats available from 0.43” (1 mm) to 2.36” (60 mm) high
• 11 gauge stainless steel roll formed frame
• Complete stainless steel construction
• 1.25” (32 mm) diameter drive pulley turns approximately 4.25” (108 mm) of belt per revolution
• 1.5” (38 mm) bottom of frame to top of belt
• Self-aligning stainless steel sealed bearings with FDA approved solid lubricant
• Washdown rated gearmotors and controls
• models available
* Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Features & Benefits:• Quick five-minute belt change for increased uptime
• Rack and pinion for fast single point belt tensioning
• 304 stainless steel frame, head and tail plates are polished to a #4 finish
• V-Groove frame with guided belt ensures accurate tracking
• Wedge-Lok™ system for impact protection
• Streamlined design fits where other conveyors do not
• Low profile, single piece frame for quick, easy cleaning
• Quick-clamp rail for easy mounting of bolt-on accessories
• Optional 0.25” (6 mm) thick bottom wiper for Flat Belt End Drives
• A variety of FDA approved belting to meet application needs
7200 rATed For Low PreSSure
Soap & Water Cleaners
7300 rATed For HIGH PreSSure
Chlorinated Cleaners
High Pressure Bearing option
v-Guided Belt Tracking
7200 & 7300 series
6
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
RECO
MM
ENDE
DTE
NSIO
NEN
DFL
OW
END
DRIV
E
Posi
tion
A
Posi
tion
D
W+5
.11
(130
)
3.58
(91)
12m
m
W
W-.1
6(4
)
4.91
(125
)D
A
4 x
4 x
22m
m K
eyw
ay
W+1
.19
(30)
W
1.90
(48)
12m
m
Posi
tion
A
Posi
tion
D
RECO
MM
ENDE
DFL
OW
TENS
ION
END
DRIV
EEN
D
L
6.04
(153
)12
.00
(305
) TYP
.
(at i
nitia
l fac
tory
bel
t ten
sion
)
1.48
(38)
TOP
OF
BELT
2.74
(70)
.38
(10)
2.25
(57)
3.44
(87)
3.00
(76)
.69
(17)
.78
(20)
BELT
TOP
OF
L(a
t ini
tial f
acto
ry b
elt t
ensi
on)
L+1.
00(2
5)
6.04
(153
)12
.00
(305
) TYP
.
1.88
(48)
3.25
(83)
.38
(10)
2.25
(57)
3.44
(87)
3.00
(76)
1.19
(30)
1.19
(30)
D
A
4 x
4 x
22m
m K
eyw
ay
5.41
(138
)
W-.1
6(4
)
7200
7300
STAn
dAr
d m
od
eLS
Flat
Bel
t en
d d
rive
Cle
ated
Bel
t en
d d
rive
STAn
dAr
d o
PTIo
nS
opt
iona
l B
otto
m w
iper
opt
iona
l To
ol-l
ess
Bel
t C
hang
e H
andl
es f
or
Qui
ck B
elt
rel
ease
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
AQu
AGAr
d® 7
200
& 7
300
Ser
IeS
7
Improve your bottom line results with industry leading speeds, best in class product transfers, and ease of automation.
Tailor Fit Accessories for your needsEase of Automation & Guiding
Fully Adjustable Single rail
no drilling with Innovative Key Hole & mounting rod
Fully Adjustable Twin rail
Low voltage wiring Accesories
High Side Guide
Accessory Bar for mounting multiple Accessories
7350 series: STAndArd FeATure overvIew
8
maximum Flexibility• Straights, Curve and Z-Frame Modules• 3 Product Transfers to Choose From• No Drilling Required for Ease of Automation or Guiding • Attach controls, photo eyes, low voltage
wire, & air tubing • Attach accessory bar for mounting
several automation components • Attach any of standard guide packages
to tailor fit conveyor
Increase Throughput• Speeds up to 260 feet per minute• Available in Straights, Curves and Z-Frames• 1” Nose Bar Tails• Powered Transfer
reduce Product Loss• 1” Nose Bar Tails for small part transfer• Powered Transfer for maintaining speeds through transfer• Roller transfer plate for smooth product transfer in
minimal added length
Powered Transfer roller Transfer Plate
1” nose Bar Tail
Formed Angle TIG welded Stand
Patented Sprocket Alignment Key
TIG welded Stainless Steel Solid uHmw
open Frame design
1” nose Bar drive
Curves 45°, 90°, 135° & 180°
STAndArd FeATure overvIew7350 series:
9
Features & Benefits:• Frame is constructed of TIG welded 304 stainless steel and features open design
with minimal horizontal surfaces
• Solid UHMW wear strips located in welded cross members for durable belt support
• Mount controls and accessories fast with no drilling required includes adjustable guiding, photo eyes, low voltage wires, controls, and air tubing
• Flexible guiding packages for a variety of applications including fully adjustable single and twin rail, and high side
• The nose bar drive and idler tails (optional) has 1” diameter pulley available for small product transfers
• The Powered Transfer (optional) has 1/2” diameter pulleys for maintaining speed through transfer
• Roller Transfer Plate (optional) for smooth product transfer in minimal added length
• Conveyor is suitable for wipe-down and occasional pressurized liquid spray cleaning up to 100 psi max
* Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Specifications:• Modular Flat, Modular Cleated and Curved
Modular Flat Belt models
• Loads up to 750 lbs* (453 kg)
• Belt speeds up to 260 ft/min (78.6 m/min)
• Belt widths: 4” (102 mm) to 36” (914 mm)
• Conveyor lengths: 3’ (914 mm) to 83’ (25,298 mm)
• Cleats available in 1” and 3” heights
• 45°, 90°, 135°, & 180° curves available
• Wearstrip material is UHMW
• TIG welded 304 Stainless Steel Frame
• FDA approved belting and plastic components
• models available
easy to Accessorize
1” nose Bar Tail
7350 series: STrAIGHT & Curved moduLAr BeLT
10
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
Posi
tion
A
Posi
tion
D
W
4.37
(111
)
W +
1.6
0 (4
1)
1.00
(25)
DIA
. SH
AFT
WIT
H .2
5 (6
) KEY
WAY
FLOW
OPT
IONA
L NO
SE B
AR TA
IL
3.00
(76)
R0.
89 (R
23)
OPT
IONA
L NO
SE B
AR D
RIVE
3.00
(76)
R0.
89 (R
23)
12.3
1 (3
13)
10.1
8 (2
58)
7.85
(199
)
11.6
8 (2
97)
OPT
IONA
L NO
SE B
AR D
RIVE
3.00
(76)
R0.
89 (R
23)
12.3
1 (3
13)
10.1
8 (2
58)
7.85
(199
)
11.6
8 (2
97)
5.82
(148
)
Posi
tion
A
Posi
tion
D
W8.87
(225
)
1.00
(25)
DIA
. SH
AFT
WIT
H .2
5 (6
) KEY
WAY
OPT
IONA
L LO
NG S
HAFT
FOR
SIDE
DRI
VEL
4.13
(105
)
5.64
(143
)
4.26
(108
)4.
13 (1
05)
STAn
dAr
d m
od
eLS
mod
ular
Fla
t B
elt
mod
ular
Cle
ated
Bel
tC
urve
d m
odul
ar F
lat
Bel
t
STAn
dAr
d o
PTIo
nS
Pow
ered
Tra
nsfe
rFo
r sm
all p
arts
and
mai
ntai
ning
spe
eds
thro
ugh
trans
fer.
slav
e dr
iven
with
sp
eeds
up
to 2
60 ft
/min
.
rol
ler
Tran
sfer
Pla
teFo
r sm
ooth
pro
duct
tran
sitio
ns
in m
inim
al a
dded
leng
th.
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
aqua
Gard
® 7
350
ser
ies:
STr
AIG
HT
& C
ur
ved
mo
du
LAr
BeL
T
11
Features & Benefits:• Frame is constructed of TIG welded 304 stainless steel and features open design
with minimal horizontal surfaces
• Solid UHMW wear strips located in welded cross members for durable belt support
• Mount controls and accessories fast with no drilling required includes adjustable guiding, photo eyes, low voltage wires, controls, and air tubing
• Flexible guiding packages for a variety of applications including fully adjustable single and twin rail, and high side
• The nose bar drive and idler tails (optional) has 1” diameter pulley available for small product transfers
• The Powered Transfer (optional) has 1/2” diameter pulleys for maintaining speed through transfer
• Roller Transfer Plate (optional) for smooth product transfer in minimal added length
• Conveyor is suitable for wipe-down and occasional pressurized liquid spray cleaning up to 100 psi max
* Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Specifications:• Z-Frame Modular Flat, Modular Cleated
and Curved Modular Flat Belt models
• Loads up to 750 lbs (453 kg)
• Belt speeds up to 260 ft/min maximum (78.6 m/min)
• Belt widths: 4” (102 mm) to 24” (610 mm)
• Total lengths up to 83’ (25,298 mm)
• Z-Frame Straight and Z-Frame Curved Modular Flat Belt has 5° to 30° fixed angle modules available in 5° increments
• Z-Frame Modular Cleated Belt has 5° to 60° fixed angle modules available in 5° increments
• 45°, 90°, 135°, & 180° curves available
• Wearstrip material is UHMW
• TIG welded 304 Stainless Steel Frame
• FDA approved belting and plastic components
• models available
easy to Accessorize
1” nose Bar Tail
7350 series: Z-FrAme & Curved moduLAr FLAT BeLT
12
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
STAn
dAr
d o
PTIo
nS
Pow
ered
Tra
nsfe
rFo
r sm
all p
arts
and
mai
ntai
ning
spe
eds
thro
ugh
trans
fer.
slav
e dr
iven
with
sp
eeds
up
to 2
60 ft
/min
.
rol
ler
Tran
sfer
Pla
teFo
r sm
ooth
pro
duct
tran
sitio
ns
in m
inim
al a
dded
leng
th.
STAn
dAr
d m
od
eLS Z-
Fram
e
mod
ular
Fl
at B
elt
Z-Fr
ame
m
odul
ar
Cle
ated
Bel
t
Z-Fr
ame
Cur
ved
m
odul
ar
Flat
Bel
t
5.82
(148
)
OPT
IONA
L NO
SE B
AR TA
IL
3.00
(76)
R0.
89 (R
23)
OPT
IONA
L NO
SE B
AR D
RIVE
3.00
(76)
R0.
90 (R
23)
12.3
1 (3
13)
10.1
8 (2
58)
7.85
(199
)
11.6
8 (2
97)
Posi
tion
D
Posi
tion
A
W
8.87
(225
)
1.00
(25)
DIA
. SH
AFT
WIT
H .2
5 (6
) KEY
WAY
OPT
IONA
L LO
NG S
HAFT
FOR
SIDE
DRI
VE
W
3.02
(77)
Posi
tion
A
Posi
tion
D
W-1
.97
(50)
FLO
W
4.36
(111
)
4.18
(106
)
L1
6.01
(153
)
L2L3
5° o
r 10°
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
aqua
Gard
® 7
350
ser
ies:
Z-F
rAm
e FL
AT, C
LeAT
ed &
Cu
rve
d m
od
uLA
r F
LAT
BeLT
13
Tailor Fit Accessories for your needsEase of Automation & Guiding
Improve your bottom line results with industry leading speeds, best in class product transfers, and ease of automation.
Low voltage wiring Accesories
Accessory Bar for mounting multiple Accessories
Fully Adjustable Single rail
no drilling with Innovative Key Hole & mounting rod
Fully Adjustable Twin rail High Side Guide
7360 series: STAndArd FeATure overvIew
14
maximum Flexibility• Straights & Z-Frame Modules• 3 Product Transfers to Choose From• No Drilling Required for Ease of Automation or Guiding • Attach controls, photo eyes, low voltage
wire, & air tubing • Attach accessory bar for mounting
several automation components • Attach any of standard guide packages
to tailor fit conveyor
Increase Throughput• Speeds up to 300 feet per minute• V-Guided Belt Tracking• 1” Nose Bar Tails• Powered Transfer
reduce Product Loss• 1” Nose Bar Tails for small part transfer• Powered Transfer for maintaining speeds through transfer• Roller transfer plate for smooth product transfer in
minimal added length
Powered Transfer
1” nose Bar Tail
Formed Angle TIG welded Stand
Tip-up Tail
v-Guided Belt Tracking
roller Transfer Plate
Snap in Hard Anodized Aluminum Bed rails
TIG welded Stainless Steel
open Frame design
STAndArd FeATure overvIew7360 series:
15
Features & Benefits:• Frame is constructed of TIG welded 304 stainless steel and features open design
with minimal horizontal surfaces
• Hard coat anodized aluminum wear strips located in welded cross members for durable belt support
• Mount controls and accessories fast with no drilling required includes adjustable guiding, photo eyes, low voltage wires, controls, and air tubing
• Flexible guiding packages for a variety of applications including fully adjustable single and twin rail, and high side
• Spindle has groove for V-guided belt and optimum performance
• Integrate jack-screw system in tails for belt take up and easy tracking adjustments
• The center drive (optional) allows additional clearance on ends when needed
• The nose bar drive and idler tails (optional) has 1” diameter pulley available for small product transfers
• The Powered Transfer (optional) has 1/2” diameter pulleys for maintaining speed through transfer
• Roller Transfer Plate (optional) for smooth product transfer in minimal added length
• Conveyor is suitable for wipe-down and occasional pressurized liquid spray cleaning up to 100 psi max
* Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Specifications:• Flat and Cleated Belt models
• Loads up to 500 lbs (453 kg)
• Belt speeds up to 300 ft/min maximum (91 m/min)
• Belt widths: 4” (102 mm) to 52” (1,321 mm)
• Total lengths: 3’ (914 mm) up to 40’ (12,192 mm)
• Cleats available in 1” and 3” heights
• Wearstrip material is hard coat anodized aluminum
• TIG welded 304 Stainless Steel Frame
• FDA approved belting and plastic components
• models available
easy to Accessorize
1” nose Bar Tail
7360 series: FLAT & CLeATed BeLT
16
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
STAn
dAr
d m
od
eLS Fl
at B
elt
Cle
ated
Bel
t
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
Cen
Ter
dr
Ive
mo
du
Le
5.59
(142
)
W
W +
2.6
2 (6
7)
4.47
(114
)
1.00
(25)
DIA
. SH
AFT
WIT
H .2
5 (6
) KEY
WAY
FLO
W
Posi
tion
A
Posi
tion
D
Posi
tion
A
Posi
tion
D
OPT
IONA
L LO
NG S
HAFT
FOR
SIDE
DRI
VE
1.00
(25)
DIA
. SH
AFT
WIT
H .2
5 (6
) KEY
WAY
W
8.68
(220
)
L
4.00
(102
)4.
00(1
02)
4.53
(115
)
R1.
81(R
46)
OPT
IONA
L NO
SE B
AR TA
IL
5.00
(127
)
R0.
56(R
14)
STAn
dAr
d o
PTIo
nS
Pow
ered
Tra
nsfe
rFo
r sm
all p
arts
and
mai
ntai
ning
spe
eds
thro
ugh
trans
fer.
slav
e dr
iven
with
sp
eeds
up
to 2
60 ft
/min
.
rol
ler
Tran
sfer
Pla
teFo
r sm
ooth
pro
duct
tran
sitio
ns
in m
inim
al a
dded
leng
th.
aqua
Gard
® 7
360
ser
ies:
FLA
T &
CLe
ATed
BeL
T
17
Features & Benefits:• Frame is constructed of TIG welded 304 stainless steel and features open design
with minimal horizontal surfaces
• Hard coat anodized aluminum wear strips located in welded cross members for durable belt support
• Mount controls and accessories fast with no drilling required includes adjustable guiding, photo eyes, low voltage wires, controls, and air tubing
• Flexible guiding packages for a variety of applications including fully adjustable single and twin rail, and high side
• Spindle has groove for V-guided belt and optimum performance
• Integrate jack-screw system in tails for belt take up and easy tracking adjustments
• The center drive (optional) allows additional clearance on ends when needed
• The nose bar drive and idler tails (optional) has 1” diameter pulley available for small product transfers
• The Powered Transfer (optional) has 1/2” diameter pulleys for maintaining speed through transfer
• Roller Transfer Plate (optional) for smooth product transfer in minimal added length
• Conveyor is suitable for wipe-down and occasional pressurized liquid spray cleaning up to 100 psi max
* Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Specifications:• Z-Frame Flat and Cleated Belt models
• Loads up to 500 lbs (453 kg)
• Belt speeds up to 300 ft/min maximum (91 m/min)
• Belt widths: 4” (102 mm) to 24” (610 mm)
• Total lengths up to 40’ (12,192 mm)
• Modular Flat has 5° to 30° fixed angle modules
• Modular Cleated has 5° to 60° fixed angle modules available in 5° increments
• Wearstrip material is hard coat anodized aluminum
• TIG welded 304 Stainless Steel Frame
• FDA approved belting and plastic components
• models available
easy to Accessorize
1” nose Bar Tail
7360 series: Z-FrAme FLAT & CLeATed BeLT
18
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
STAn
dAr
d m
od
eLS
Z-Fr
ame
Fl
at B
elt
Z-Fr
mae
C
leat
ed
Bel
t
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
Cen
Ter
dr
Ive
mo
du
Le
OPT
IONA
L LO
NG S
HAFT
FOR
SIDE
DRI
VE
1.00
(25)
DIA
. SH
AFT
WIT
H .2
5 (6
) KEY
WAY
Posi
tion
D
Posi
tion
A
W
8.68
(220
)
5.59
(142
)
OPT
IONA
L NO
SE B
AR TA
IL
5.00
(127
)
R0.
56(R
14)
L1
L2
4.00
(102
)
R1.
81(R
46)
5°, 1
0°,
15° o
r 30°
W4.47
(114
)
W+2
.62
(67)
FLO
W
1.00
(25)
DIA
. SH
AFT
WIT
H .2
5 (6
) KEY
WAY
STAn
dAr
d o
PTIo
nS
Pow
ered
Tra
nsfe
rFo
r sm
all p
arts
and
mai
ntai
ning
spe
eds
thro
ugh
trans
fer.
slav
e dr
iven
with
sp
eeds
up
to 2
60 ft
/min
.
rol
ler
Tran
sfer
Pla
teFo
r sm
ooth
pro
duct
tran
sitio
ns
in m
inim
al a
dded
leng
th.
aqua
Gard
® 7
360
ser
ies:
Z-F
rAm
e FL
AT &
CLe
ATed
BeL
T
19
designed to transport Food & Pharmaceutical product with confidence
while keeping operators safe.
Eliminates sprocket fasteners and keeps pulleys safe & sanitary.
Flange Belt Tracking System provides continuous sprocket
alignment for quick belt assembly.
Patented Sprocket Alignment Key
For quick release of belt tension.
Tip-up TailFor easy cleaning on
wide or long conveyors.
Belt Lifters
7400 series: STAndArd FeATure overvIew
20
Eliminate horizontal surfaces for complete drainage.
round Cross members
improves cleaning and access to pins.
uSdA Accepted open Hinge modular Belt
Eliminates fasteners in food zone. (Continuous TIG welding)
Stainless Steel welded Frame Construction
Quickly removed without tools for cleaning. Most pieces are identical
& completely interchangeable.
Solid uHmw wear Strips
Stainless Steel Gearmotors located outside food zone.
STAndArd FeATure overvIew7400 series:
21
Fast & effective Sanitation options for daily Cleaning
Total time for cleaning preparation:30 Seconds
NO TOOLS REQUIRED!
Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
Tool-less Tip-up Pulleyfor quick release of
belt tension
Tool-less Belt Liftersfor easy access to theinside of the conveyor
Frame Cutoutsfor continuous access to the inside of the conveyor
7400 series: SAnITATIon & CLeAnInG oPTIonS
22
Fast & effective Sanitation options forComplete dis-Assembly & Cleaning
No Problem!
3 Minutes Per Section
*Belt removal requires a hammer and tap
1 Person
Fully Assembled
to
Completelydis-Assembled
in minutes
Conveyor Cleaning Preparation*
SAnITATIon & CLeAnInG oPTIonS7400 series:
23
Features & Benefits:• Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over
10’ (3,048 mm) long consist of multiple sections which are bolted together.
• Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
• Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
• The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
• Drive sprockets are located on a 1.5” square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
• Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5” diameter transfer.
• The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
• Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
* Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Specifications:• Modular Flat, Modular Cleated and
Curved Modular Flat Belt models
• Load: 20 lbs/square foot of belt (90 kg/m2)*
• Belt speed: 233 ft/min maximum (71 m/min)
• Belt Widths: 6” (152 mm) to 60” (1,524 mm)
• Conveyor Lengths: 36” (914 mm) to 999” (25,375 mm)
• Degree of curves: 15° to 180° 8” and 10” widths available in 30° increments 12” through 36” widths available in 15° increments
• Maximum of 2 curves per conveyor with up to 240° total degrees of turns (up to 4 curves is possible dependant upon length and degree of curves, consult factory)
• Wear strip material is UHMW
• Continuous TIG welded 304 stainless steel frame
• #4 Polish on all outside surfaces
• Bearing material is 400 stainless steel
• Bearing lubricant is H1 type FDA lubricant
• FDA approved belting and plastic components
Tip-up Tail
7400 series: STrAIGHT & Curved moduLAr BeLT
24
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
STAn
dAr
d m
od
eLS
mod
ular
Fla
t B
elt
mod
ular
Cle
ated
Bel
tC
urve
d m
odul
ar F
lat
Bel
t
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
STAn
dAr
d o
PTIo
nS
nos
e B
ar I
dler
Pul
ley
1.5”
(38
mm
) dia
met
er fo
r tig
ht tr
ansf
ers.
Bel
t Li
fter
sFo
r eas
y cl
eani
ng o
n w
ide
or
long
con
veyo
rs.
Fram
e C
ut-o
utAl
low
s ac
cess
for i
nter
nal f
ram
e w
ashi
ng.
6.00
(152
)
5.65
(144
)
1.5
(38)
DIA
.
NOSE
BAR
TAIL
W+.
50 (1
3)
12.5
0 (3
18)
L(a
t ini
tial f
acto
ry b
elt t
ensi
on)
6.00
(152
)
5.65
(144
)
6.00
(152
)
10.3
7 (2
63)
11.5
9 (2
94)
1.5
(38)
DIA
.
7.34
(187
)
W+4
.02
(102
)
W+1
.77
(45) FL
OW
Posi
tion
A
Posi
tion
D
W
7.36
(187
)
1.00
(25)
DIA
. SH
AFT
WIT
H 1
/4" K
EYW
AY
W+2
.97
(75)
Not
e: W
hen
orde
red
with
a G
earm
otor
M
ount
ing
Pack
age
the
bear
ing
supp
ort i
s re
plac
ed w
ith th
e G
earm
otor
Mou
ntin
g br
acke
t.
Posi
tion
D
Posi
tion
A
Not
e: W
hen
orde
red
with
a G
earm
otor
Mou
ntin
g Pa
ckag
e th
e be
arin
g su
ppor
t is
repl
aced
with
the
Gea
rmot
or M
ount
ing
brac
ket.
NOSE
BAR
TAIL
FLO
W
L(a
t ini
tial f
acto
ry b
elt t
ensi
on)
6.00
(152
)6.
00 (1
52)
W+4
.02
(102
)
2.16
(55)
2.15
(54)
5.65
(143
)4.
29 (1
09)
W+1
.77
(45)
8.70
(221
)
1.00
(25)
DIA
. SH
AFT
WIT
H 1
/4" K
EYW
AY
W+.
50 (1
3)
5.85
(149
)
6.00
(152
)
5.65
(144
)
1.5
(38)
DIA
.
aqua
pruF
® 74
00 s
erie
s: S
TrAI
GH
T &
Cu
rve
d m
od
uLA
r B
eLT
25
Features & Benefits:• Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over
10’ (3,048 mm) long consist of multiple sections which are bolted together.
• Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
• Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
• The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
• Drive sprockets are located on a 1.5” square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
• Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5” diameter transfer.
• The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
• Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
* Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Specifications:• Z-Frame Modular Flat and Cleated Belt models
• Loads up to 20 lbs/square foot of belt (90 kg/m2)*
• Belt speed: 233 ft/min maximum (71 m/min)
• Belt Widths: 6” (152 mm) to 24” (610 mm)
• Section Lengths: 24” (610 mm) to 20’ (6.1 m)
• Total Conveyor Lengths up to 40’ (12.2 m)
• Z-Frame Modular Flat Belt has 5°, 10°, 15° & 30° Fixed Angle Modules standard (inclines over 5° require friction insert belting)
• Z-Frame Modular Cleated Belt has 15°, 30°, 45° & 60° Fixed Angle Modules standard
• Cleat height available in 25 mm & 76 mm
• Wear strip material is UHMW
• Continuous TIG welded 304 stainless steel frame
• #4 Polish on all outside surfaces
• Bearing material is 400 stainless steel
• Bearing lubricant is H1 type FDA lubricant
• FDA approved belting and plastic components
Tip-up Tail
7400 series: Z-FrAme moduLAr BeLT
26
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
STAn
dAr
d m
od
eLS
Z-Fr
ame
mod
ular
Fl
at B
elt
Z-Fr
ame
mod
ular
C
leat
ed B
elt
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
STAn
dAr
d o
PTIo
nS
nos
e B
ar I
dler
Pul
ley
1.5”
(38
mm
) dia
met
er fo
r tig
ht tr
ansf
ers.
Bel
t Li
fter
sFo
r eas
y cl
eani
ng o
n w
ide
or
long
con
veyo
rs.
Fram
e C
ut-o
utAl
low
s ac
cess
for i
nter
nal f
ram
e w
ashi
ng.
mo
du
LAr
FLA
T Be
LT m
od
eL
Z-Fr
ame
Conf
igur
atio
ns
5.65
(144
)
1.5(
38) D
IA.
6.00
(152
)
6.00
(152
)1.
5(38
) DIA
.
10.3
7 (2
63)
7.34
(187
)
11.5
9 (2
94)
A
B(p
ocke
t wid
th)
Angl
e
W+4
.02
(102
)
W+1
.77
(45)
W 8.70
(221
)
1.00
(25)
DIA
. SH
AFT
WIT
H 1
/4" K
EYW
AY
6.00
(152
)
5.65
(143
)
6.00
(152
)
2.14
(54)
2.14
(54)
4.29
(109
)
NOSE
BAR
TAI
L
FLO
W
Not
e: W
hen
orde
red
with
a G
earm
otor
Mou
ntin
g Pa
ckag
e th
e be
arin
g su
ppor
t is
repl
aced
with
the
Gea
rmot
or M
ount
ing
brac
ket.
A= 7
.43(
189)
for 1
" Gui
de P
rofil
e
9.09
(231
) for
3" G
uide
Pro
file
B= W
-2.6
7(68
) for
1" G
uide
Pro
file
W
-2.6
7(67
) for
3" G
uide
Pro
file
Posi
tion
D
Posi
tion
A
7400
Fla
tAv
aila
ble
in 5
°, 10
°, 15
° and
30°
Ang
les
aqua
pruF
® 74
00 s
erie
s: Z
-Fr
Ame
mo
du
LAr
BeL
T
Z-FrAme moduLAr BeLT
27
Specifications:• Loads up to 20 lbs/roller
• Roller widths: 8”, 12”, 18”, 24”, 30”, & 36”
• Conveyor lengths: 36” to 120” in 3” increments
• Frame is all welded with round cross members
• Frames outer surface is a #4 finish with 2B on internal components
• Roller centers 3” and 6”
• Standard Hollow Tube roller 1.9” diameter
• Solid Acetal roller 2” diameter
• Hollow Tube rollers are 304 SS hollow tubes with a 2B finish
• Solid Acetal roller ends are located in a UHMW guide bar
• Hollow Tube roller ends are spring loaded 7/16” hex shaft
• Stands are stainless steel tube with adjustable foot and thread guards
• Solid Acetal roller is designed to USDA Red Meat & poultry standards
Features & Benefits:• Frame is constructed of continuous TIG welded 304 stainless steel for durability
in tough applications
• Integral 1” high side for product containment or low side for maximum flexibility
• Solid Acetal rollers simply lift out of UHMW guide for quick for access to frame during cleaning
• Solid Acetal UHMW guides removable without tools for complete access to frame during cleaning
• Hollow Tube spring loaded roller can be removed quickly for access to frame during cleaning
• Optional welded end stop available for durability
Stainless Steel Gravity roller: Solid Acetal
Stainless Steel Gravity roller: Hollow Tube
7400 series: roLLer ConveyorS
28
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
STAn
dAr
d m
od
eLS
Hol
low
Tub
e S
tain
less
Ste
el
rol
ler
Con
veyo
rsS
olid
Ace
tal
Sta
inle
ss
Ste
el r
olle
r C
onve
yors
"WW
" + 3
.25
"EE"
"DD
"
2.25
2.25
0.50
4.39
Ø 2
.00
M10
TAP
"WW
" + .0
50
"WW
" + 3
.77
"LLL
LL"
5.27
WW
+ 3
.25
WW
+ 0
.50
WW
+ 3
.77
WW
-1.0
0
6.75
* Re
com
men
ded
min
imum
ang
le
of d
eclin
e is
5 d
egre
es fo
r pr
oduc
ts g
reat
er th
an 1
0 lb
s.
* Re
com
men
ded
min
imum
ang
le
of d
eclin
e is
10
degr
ees
for
prod
ucts
less
than
5 lb
s.
* Re
com
men
ded
3 ro
llers
are
in
cont
act w
ith th
e pr
oduc
t.
* Re
com
men
ded
min
imum
ang
le
of d
eclin
e is
5 d
egre
es fo
r pr
oduc
ts g
reat
er th
an 1
0 lb
s.
* Re
com
men
ded
min
imum
ang
le
of d
eclin
e is
7-1
0 de
gree
s fo
r pr
oduc
ts le
ss th
an 5
lbs.
* Re
com
men
ded
3 ro
llers
are
in
cont
act w
ith th
e pr
oduc
t.
0.50
2.25
"EE"
3.75
"DD
"
"LLL
LL"
4.62
WW
+ 0
.50
WW
+ 1
.50
WW
+ 1
.77
2.25
WW
+ 1
.50
WW
+ 0
.50
WW
+ 1
.77
5.63
REF
aqua
pruF
® 74
00 s
erie
s: r
oLL
er C
on
veyo
rS
29
designed to transport Food & Pharmaceutical product with confidence
while keeping operators safe.
For quick release of belt tension.
Tool-Less Tip-up Pulley
nose Bar Transfer option for small product
transfers. Available in: 1/2”, 1” and 1 7/8”.
Belt Tension System with welded Bearing Support for tensioning
and tracking with ACME threads
Ensures a permanent sanitary bond.
Cast on urethane Lagged Pulley
For positive belt tracking.
v-Guided Belting
7600 series: STAndArd FeATure overvIew
30
* patent pending
Center drive option* for dual Nose Bar Transfers and increased
end clearance. Tool-less disassembly for quick sanitation.
Stainless Steel Gearmotors located outside of food zone.
Full range of Sanitary Belting options
Eliminates fasteners in food zone. (Continuous TIG welding)
Stainless Steel welded Frame Construction
Quickly removed without tools for cleaning. Most pieces are identical
& completely interchangeable.
Solid uHmw wear StripsEliminate horizontal surfaces
for complete drainage.
round Cross members
STAndArd FeATure overvIew7600 series:
31
Fast & effective Sanitation options for daily Cleaning
Tool-less Belt Liftersfor easy access to theinside of the conveyor
Total time for cleaning preparation:30 Seconds
NO TOOLS REQUIRED!
Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
Frame Cutoutsfor continuous access to the inside of the conveyor
Quick release Stands
for fast belt removal
Tool-less Tip-up Pulleyfor quick release of
belt tension
7600 series: SAnITATIon & CLeAnInG oPTIonS
32
Fast & effective Sanitation options forComplete dis-Assembly & Cleaning
No Problem!
3 Minutes Per Section
1 Person
Fully Assembled
to
Completelydis-Assembled
in minutes
Conveyor Cleaning Preparation
SAnITATIon & CLeAnInG oPTIonS7600 series:
33
* Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Specifications:• Flat, Cleated Belt End Drive and Flat Belt Center Drive models
• Load: 20 lbs/square foot of belt (90 kg/m2)*
• Belt speed: 328 ft/min maximum (100 m/min)
• Belt Widths: 6” (152 mm) to 60” (1,524 mm)
• Conveyor Lengths: 36” (914 mm) to 40’ (12.2 m)
• 3.5” (89 mm) diameter drive roller with cast-on Urethane lagging
• UHMW Wear strip bed plate
• Continuous TIG welded 304 stainless steel frame
• #4 Polish on all outside surfaces
• Bearing material is 400 stainless steel
• Bearing lubricant is H1 type FDA lubricant
• FDA approved belting and plastic components
Features & Benefits:• Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors
over 10’ (3,048 mm) long consist of multiple sections which are bolted together.
• Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
• Center Drives allow additional clearance on ends when needed. Unique tool-less construction for guarding and back bend rollers.
• Belt tensioning mechanism uses Acme threads for easy cleaning and is externally mounted to the frame with adequate clearances for cleaning.
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
• Return Belt Supports are 4" UHMW Rollers and are easily removed without tools for effective cleaning.
• Drive spindle is Cast-On Urethane Lagging for increased load capacity. Spindle has groove for V-guided belts for optimum performance.
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
• Nose bar idler ends (optional) are available in 1/2", 1" & 1 7/8" for small product transfers.
• Belt lifters (optional) lift belt from wear strips / bed plate by simply pulling an external lever for fast access and effective cleaning.
• Belt scraper (optional) removes build up and adjusts easily for each application. Features tool-less disassembly/assembly for cleaning of parts.
• Solid bed plate (optional) is stainless steel and locates on UHMW strips for delicate / fragile products.
provides continuous support for delicate product (dry applications only).
oPTIonAL: Bed Plates
UHMW blade removes build-up and is easily adjusted.
oPTIonAL: Belt Scraper
Tool-less Quick removal Pulleys
7600 series: end drIve & CenTer drIve BeLT
34
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
STAn
dAr
d m
od
eLS
Flat
Bel
t en
d d
rive
Flat
Bel
t C
ente
r d
rive
Cle
ated
Bel
t en
d d
rive
STAn
dAr
d o
PTIo
nS
Tip-
up
Tail
Bel
t Li
fter
sFo
r eas
y cl
eani
ng o
n w
ide
or
long
con
veyo
rs.
Fram
e C
ut-o
utAl
low
s ac
cess
for i
nter
nal f
ram
e w
ashi
ng.
Bed
Pla
tes
prov
ides
con
tinuo
us s
uppo
rt fo
r del
icat
e pr
oduc
t (dr
y ap
plic
atio
ns o
nly)
.
DOC0
979
FLOW
WW
+6.
43 (1
63)
W+
1.77
(45)
8.64
(219
)
1.00
(25)
DIA
. SHA
FTW
ITH
1/4"
KEY
WAY
Posi
tion
D
Posi
tion
A
Whe
n or
dere
d w
ith a
Gea
rmot
orM
ount
ing
Pack
age
the
bear
ing
shaf
t is
repl
aced
with
the
Gear
mot
or M
ount
ing
brac
ket.
6.00
(152
)
5.56
(141
)
6.00
(152
)
L(a
t ini
tial f
acto
ry b
elt t
ensi
on)
3.62
(92)
1.81
(46)
W+
.50
(13)
1/2"
Nos
e Ba
r Tai
l
6.00
(152
)
5.56
(141
)
R0.2
5 (R
6)
1" N
ose
Bar T
ail
6.00
(152
)
5.56
(141
)
R0.5
0 (R
13)
1 7/
8" N
ose
Bar T
ail
6.00
(152
)
5.56
(141
)
R0.9
4 (R
24)
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
end
dr
Ive
mo
deL
aqua
pruF
® 7
600
ser
ies:
en
d d
rIv
e &
Cen
Ter
dr
Ive
BeLT
35
Specifications:• Z-Frame Modular Flat and Cleated Belt models
• Load: 20 lbs/square foot of belt (90 kg/m2)
• Belt speed: 233 ft/min maximum (71 m/min)
• Belt Widths: 6” (152 mm) to 24” (610 mm)
• Conveyor Lengths: 24” (610 mm) to 20’ (6.1 m)
• Total Conveyor Lengths: up to 40’ (12.2 m)
• Z-Frame Modular Flat Belt has 5°, 10° and 15° Fixed Angle Modules standard
• Z-Frame Modular Cleated Belt has 30°, 45° and 60° Fixed Angle Modules standard
• 3.5” (89 mm) diameter drive roller with cast-on Urethane lagging
• UHMW Wear strip bed plate
• Continuous TIG welded 304 stainless steel frame
• #4 Polish on all outside surfaces
• Bearing material is 400 stainless steel
• Bearing lubricant is H1 type FDA lubricant
• FDA approved belting and plastic components
* Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
Features & Benefits:• Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over
10’ (3,048 mm) long consist of multiple sections which are bolted together.
• Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
• Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
• Belt tensioning mechanism is externally mounted to the frame with adequate clearances for cleaning. No external threads are used.
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
• The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
• Drive spindle is Cast-On Urethane Lagging for increased load capacity. Spindle has groove for V-guided belts for optimum performance.
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
• Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5” diameter transfer.
• The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
• Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
UHMW blade removes build-up and is easily adjusted.
oPTIonAL: Belt Scraper
7600 series: Z-FrAme end drIve
36
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
STAn
dAr
d o
PTIo
nS
Tip-
up
Tail
Bel
t Li
fter
sFo
r eas
y cl
eani
ng o
n w
ide
or
long
con
veyo
rs.
Fram
e C
ut-o
utAl
low
s ac
cess
for i
nter
nal f
ram
e w
ashi
ng.
Bed
Pla
tes
prov
ides
con
tinuo
us s
uppo
rt fo
r del
icat
e pr
oduc
t (dr
y ap
plic
atio
ns o
nly)
.
STAn
dAr
d m
od
eLS
Z-Fr
ame
Flat
B
elt
end
dri
veZ-
Fram
e C
leat
ed
Bel
t en
d d
rive
W+.
50 (1
3)
DO
C10
02
FLO
WFL
OW
FLO
WW
W+6
.43
(163
)
W+1
.77
(45)
8.64
(219
)
1.00
(25)
DIA
. SH
AFT
WIT
H 1
/4" K
EYW
AY
Posi
tion
D
Posi
tion
A
Whe
n or
dere
d w
ith a
Gea
rmot
orM
ount
ing
Pack
age
the
bear
ing
shaf
t is
repl
aced
with
the
Gea
rmot
or M
ount
ing
brac
ket.
6.00
(152
)
5.56
(141
)
R0.
50 (R
13)
1" N
ose
Bar T
ail
6.00
(152
)
5.56
(141
)
R0.
94 (R
24)
1 7/
8" N
ose
Bar T
ail
6.00
(152
)
3.62
(92)
1.81
(46)
5.56
(141
)
Angl
e
7600
Fla
t Bel
t Ava
ilabl
ein
5°,
10° a
nd 1
5° A
ngle
s
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
aqua
pruF
® 7
600
ser
ies:
Z-F
rAm
e en
d d
rIv
e
37
Specifications:• Modular Flat, Modular Cleated and Curved Modular
Flat Belt models
• Z-Frame Modular Flat and Cleated models
• Load: 20 lbs/square foot of belt (90 kg/m2)
• Belt speed: 233 ft/min maximum (71 m/min)
• Belt Widths: 6” (152 mm) to 36” (914 mm)
• Conveyor Lengths: 36” (914 mm) to 999” (25,375 mm)
• UHMW Wear strip bed plate
• Continuous TIG welded 304 stainless steel frame
• #4 Polish on all frame surfaces
• Bearing material is 400 stainless steel
• Bearing lubricant is H1 type FDA lubricant
• USDA Approved belting and plastic components
• Meets USDA, NSF & AMI design specifications
Available in idler Tail
oPTIonAL: Clean-in-Place module
MAR
KETIN
G
AGRIC
ULT
URAL
S E R V I C E
Features & Benefits:• Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors
over 10’ (3,048 mm) long consist of multiple sections which are bolted together (can be welded together on site).
• Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
• Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
• Open Belt Tracking Flanges and solid UHMW idler pucks create access to pulleys.
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
• The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
• Drive sprockets are located on a 1.5” square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
• Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5” diameter transfer.
• The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
• Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
• TIG welded stand offs keep fasteners out of the food zone.
7400 uLtimate series: moduLAr BeLT
38
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
STAn
dAr
d o
PTIo
nS
nos
e B
ar I
dler
Pul
ley
1.5”
(38
mm
) dia
met
er fo
r
tight
tran
sfer
s.
Bel
t Li
fter
sFo
r eas
y cl
eani
ng o
n w
ide
or
long
con
veyo
rs.
Fram
e C
ut-o
utAl
low
s ac
cess
for i
nter
nal
fram
e w
ashi
ng.
W+5
.77(
147)
W+1
.77(
45)
W
8.47
(215
)
1.00
(25)
DIA
SH
AFT
WIT
H 1
/4" K
EYW
AY
Posi
tion
D
Posi
tion
A
FLO
W
Not
e: W
hen
orde
red
with
a G
earm
otor
Mou
ntin
g Pa
ckag
e th
e be
arin
g su
ppor
tis
repl
aced
with
the
Gea
rmot
or M
ount
ing
brac
ket.
W+3
.77(
96)
L (a
t ini
tial f
acto
ry b
elt t
ensi
on)
6.00
(152
)6.
00(1
52)
2.14
(54)
2.14
(54)
5.65
(143
)4.
29(1
09)
A
B(p
ocke
t wid
th)
Clea
ted
Belt
6.33
(161
)
W+.
50(1
3)
Flat
Bel
t
Con
FIG
ur
ATIo
nS
AvAI
LABL
e
Stra
ight
Flat
& C
leat
ed M
odul
ar B
elt
nos
e-o
ver
Flat
& C
leat
ed
Mod
ular
Bel
t
Z-Fr
ame
Clea
ted
Mod
ular
Bel
t
Curv
e Fl
at M
odul
ar B
elt
Hor
izon
tal t
o In
clin
e Cl
eate
d M
odul
ar B
elt
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
aqua
pruF
® 74
00 u
Ltim
ate
ser
ies:
mo
du
LAr
BeL
T
39
Specifications:• Load: 20 lbs/square foot of belt (90 kg/m2)
• Belt Widths: 6” (152 mm) to 36” (914 mm)
• Lengths: 36” (914 mm) to 40’ (12.2 m)
• Belt speed: 233 ft/min maximum (71 m/min)
• Solid urethane belting, includes Belt Scraper
• UHMW Wear strip bed plate
• Continuous TIG welded 304 stainless steel frame
• #4 Polish on all frame surfaces
• Bearing material is 400 stainless steel
• Bearing lubricant is H1 type FDA lubricant
• USDA Accepted Belting
• Meets USDA, NSF & AMI design specifications
Features & Benefits:• Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors
over 10’ (3,048 mm) long consist of multiple sections which are bolted together (can be welded together on site).
• Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
• Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
• Solid Urethane belt is sprocket driven for consistent performance and has no bacteria harboring hinges or pins.
• Open Belt Tracking Flanges and solid UHMW idler pucks create access to pulleys.
• Return Belt Supports are 4” UHMW Rollers and are easily removed without tools for effective cleaning.
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
• Drive sprockets are located on a 1.5” square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
• Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
• TIG welded stand offs keep fasteners out of the food zone.
UHMW blade removes build-up & is easily adjusted
Belt Scraper
Positive drive
MAR
KETIN
G
AGRIC
ULT
URAL
S E R V I C E
7600 uLtimate series: PoSITIve drIve BeLT
40
For more information, go to www.dorner.com. Call 800.397.8664 or 262.367.7600.Due to the wide variety of drive set ups and applications, point of installation guarding is the responsibility of the end user.
Con
FIG
ur
ATIo
nS
AvAI
LABL
e
Stra
ight
Flat
& C
leat
ed B
elt
nos
e-o
ver
Flat
& C
leat
ed B
elt
Hor
izon
tal t
o In
clin
e Fl
at &
Cle
ated
Bel
t
Z-Fr
ame
Clea
ted
Belt
STAn
dAr
d o
PTIo
nS
Bel
t Li
fter
sFo
r eas
y cl
eani
ng o
n w
ide
or lo
ng c
onve
yors
.Fr
ame
Cut
-out
Allo
ws
acce
ss fo
r int
erna
l fra
me
was
hing
.
W+5
.77(
147)
W+1
.77(
45)
W
8.47
(215
)
1.00
(25)
DIA
SH
AFT
WIT
H 1
/4" K
EYW
AY
Posi
tion
D
Posi
tion
A
FLO
W
Not
e: W
hen
orde
red
with
a G
earm
otor
Mou
ntin
g Pa
ckag
e th
e be
arin
g su
ppor
tis
repl
aced
with
the
Gea
rmot
or M
ount
ing
brac
ket.
W+3
.77(
96)
L (a
t ini
tial f
acto
ry b
elt t
ensi
on)
6.00
(152
)6.
00(1
52)
2.14
(54)
2.14
(54)
5.65
(143
)4.
29(1
09)
A
B(p
ocke
t wid
th)
Clea
ted
Belt
6.33
(161
)
W+.
50(1
3)
Flat
Bel
t
w =
Con
veyo
r Bel
t Wid
th
dim
= in
(mm
)
aqua
pruF
® 7
600
uLti
mat
e se
ries
: Po
SITI
ve d
rIv
en B
eLT
41
Choosing the right profile is an important step in the overall conveyor selection process. Application factors to consider include product thickness, product stability and accuracy in relation to the conveyed product. Other requirements may include side transfers, merges and accumulating products. Guides can be drilled, trimmed and cut to fit custom applications.
(The featured 3D models were created using Dorner’s 3D CAD Library. The 3D CAD Library is available to you on our website at www.dorner.com)
7350 & 7360 SerIeS
7400 & 7600 SerIeS
043” Bolt-On High SIde
051” Bolt-On High SIde
13Fully Adjustable Round
14Fully Adjustable Round
w/ Tool-less Handles
15Fully Adjustable Twin Rail
16Fully Adjustable Twin Rail
w/ Tool-less Handles
17Fully Adjustable Flat
18Fully Adjustable Flatw/ Tool-less Handles
021” Bolt-On High Side 03
3” Bolt-On High Side
043” Bolt-On High SIde
051” Bolt-On High SIde
13Fully Adjustable Round
14Fully Adjustable Round
w/ Tool-less Handles
15Fully Adjustable Twin Rail
16Fully Adjustable Twin Rail
w/ Tool-less Handles
17Fully Adjustable Flat
18Fully Adjustable Flatw/ Tool-less Handles
021” Bolt-On High Side 03
3” Bolt-On High Side
043” Bolt-On High SIde
051” Bolt-On High SIde
13Fully Adjustable Round
14Fully Adjustable Round
w/ Tool-less Handles
15Fully Adjustable Twin Rail
16Fully Adjustable Twin Rail
w/ Tool-less Handles
17Fully Adjustable Flat
18Fully Adjustable Flatw/ Tool-less Handles
021” Bolt-On High Side 03
3” Bolt-On High Side
Profile 1Low Side
Profile 21” (25) High Side
Profile for CleatTypes A, G, J, M, N & R
Profile for Cleat Types B, C, K, L, P, Q, S & T
Profile 43” (76) High Side
seCtioN titLeproFiLes
42
STAndArd BeLTInG
Dorner has a selection of standard belting for most common conveyor applications. Standard belt material is stocked at Dorner, then cut and spliced at the factory for fast conveyor shipment.
Accumulation Belts
General Purpose Belts
High Friction Belts
Electrically Conductive Belts
Cleated Belts
SPeCIALTy BeLTInG
For your special conveyor needs, Dorner has a large selection of specialty belting options available. Specialty belt material is not stocked at Dorner and needs to be custom ordered for your conveyor.
Color Contrasting Belts
Chemical Resistant Belts
Solid Urethane Belts
FDA Sealed Edge Belts
FDA Encased Belts
moduLAr PLASTIC BeLTInG
Modular Plastic Belting is available in various flat top and cleated styles. Choose from open mesh, closed mesh, cleated and sidewall cleated belts with many options in frictions, temperature ratings and chemical resistance.
Friction Inserts Flat Top Belts Flush Grid Belts Curve Belts Cleated Belts
BeLtiNG
43
Gearmotors can be mounted to the conveyor with these standard mounting packages. Each package allows several position options and is available in both 90˚ and Parallel gearmotor configurations allowing you great flexibility. Mounting packages that utilize timing belts and pulleys also provide a wide range of belt speed options.
(The featured 3D models were created using Dorner’s 3D CAD Library. The 3D CAD Library is available to you on www.dornercad.com)
SIde mounTS
Side mounts couple the conveyor and gearmotor with a flexible coupling or directly. used for taller parts or where space below the conveyor is limited.
BoTTom mounTS
Bottom mounts utilize timing belts and pulleys for a wide variety of belt speed options. used for taller parts and provides the most compact package.
CenTer mounTS
Frees up both ends of conveyor for machine interface and maintenance free belt take-up.
GeArmoTorS & ConTroLS
90˚ Gearmotor Orientations
90˚ Gearmotor Orientations
Parallel Shaft Gearmotors90˚ Gearmotorsvariable Speed Controllers
1
1
seCtioN titLeGearmotors & mouNtiNG paCKaGes
44
SAnITAry Conveyor SuPPorT STAndS & ACCeSSorIeS
Dorner offers the most complete line of conveyor support stands available.
Features & Benefits
• Widths: 4 in to 60 in (102 mm to 1,524 mm)
• Heights: 7 in to 99 in (178 mm to 2,515 mm)
• Complete stainless steel construction with a 2B or #4 finish
• Vertical legs are formed channel or a closed 2” square tube
• Has +/- 2” of adjustment
• Fixed Foot self aligns 10° for sloped floors
• Horizontal Mount Version for Direct Level Conveyor Mounting
• Incline Mount Version for angled conveyor applications
• Designed for Washdown Environments
Accessories
• Casters
• Diagonal bracing
• Floor Anchor Kits
• Ceiling Supports
Sanitary FloorAnchor Kits
Tall Support StandsLow Height Support Stands
Formed Channel Support Stands
Adjustable AngleSupport Stands
Closed 2” Square Tube Support Stands
Swivel Locking Casters
Ceiling Supports
support staNds
45
Powered TrAnSFer
Features & Benefits• 1/2” diameter nose rollers for small part transfer
• Adjustable height and distance to main roller for fine tuning the product transfer
• High speed positive drive conveyor belts to ensure consistent speed
• Maintains product speed through transfer for gapping and pacing
• Located at drive and/or idler end of main conveyor
• Compatible with both curve and straight conveyors
• Compatible with all end drive tails and drive mount packages
• Made of corrosion resistant materials for wipe down or occasional wash down
• Slave driven from main roller for minimal install requirements
Conveyor Specifications:Conveyor width: 4” wide to 36” wide in 2” increments
Conveyor Length: Adds less than 8” to conveyor length
Conveyor Speed: Up to 175 ft/min
Slave drive Speed options: • Same Speed • Speed Up by 1.6 : 1 • Speed Down by 1.25 : 1
General Specifications• FDA approved 1/2” diameter self lubricated nose bar bushings• Positive drive FDA approved urethane belting• 300 series stainless steel / anodized aluminum construction• Plated corrosion resistant bearings• Used on infeed and exit tail • For infeed tail : Needs conveyor to be ordered with output shaft tail • For exit tail : Needs conveyor to be ordered with dual output shaft tail• Can be purchased as a conveyor only • Does not include mounting brackets or slave drive • Includes output shaft only
reduce Product Loss
Space Saving design
Slave driven
seCtioN titLeeNGiNeered optioNs
46
moTorIZed PuLLey
Features & Benefits• 304 stainless steel for durability in tough applications• Sealed drum motor is ideal for heavy duty
washdown applications• Pulley locating supports allow for fast removal and
relocating for sanitation • No fasteners are used to locate sprockets on
motorized pulley • Innovative sprocket locating key way allows for fast and
effective sanitation (patent pending)
General Specifications:• 7400 and 7400 Ultimate Stainless Steel Sprocket
model (photo #1)
• 7600 Molded Urethane Lagging model (photo #2)
• 7600 Ultimate Plastic Sprocket model (photo #3)
• Motorized Pulley Widths: 12” to 46” in 2” increments
• All external components are stainless steel
• Pulley located in conveyor frame with welded supports
• Pulley supports have quick locating and removal slot
• All frame components are a #4 finish
• Completely sealed components ideal for sanitary applications
• 50,000 hours of operation between oil changes
• 96% mechanically efficient
• Saves up to 30% power consumption over conventional motors
• 230 or 460 Volt 3 Phase
• VFD variable speed capable
• Speeds to 270 feet per minute
1
3
2
eNGiNeered optioNs
47
LAne & AdjuSTABLe GuIdInG HoPPerS
Controls product flow and direction, also adjustable for various-sized products.
• Accumulates large quantity of product
• Diverts product across lanes
• Merges multiple lanes to a single lane
• Support unstable product
• Stainless steel options available
Guide product onto the conveyor and reduce product waste during quick-filling of conveyors.
• Locate and guide product onto conveyors
• Removable for easier maintenance and sanitation
• Stainless steel construction
CHuTeS Conveyor CoverS
steel, stainless and plastic chutes help guide product onto or away from the conveyor belt.
Clear Lexan® or stainless steel covers can help improve operator safety and/or protect product from contamination.
seCtioN titLeeNGiNeered appLiCatioNs
48
CeILInG mounTed ConveyorS SCrAPer
save floor space by mounting conveyors from the ceiling.
Removes product build-up and releases product from belt.
• Adjustable tension accommodates a variety of products
• Stainless steel construction
CLeAn In PLACe muLTI-BeLT Curve
Reduce sanitation time and water usage with a Clean in Place unit.
• Automated washing system for modular belts
• Cleans the top and bottom surfaces of the belts
• Forces water through the open hinge of the belt
Create a tighter turn radius and reduce the amount of space required for a modular belt curve by using multiple belts on one conveyor frame.
eNGiNeered appLiCatioNs
49
drIP PAnS wIre BeLT ConveyorS
Control product spillage and reduce cleaning time with drip pans.
• Collection for liquids and debris which fall from the product
• Can be hinged for easy clean-out or funneled to collect the liquid to a central location
• Drain option for easier cleaning
• All stainless steel construction
• Maximum air flow around products to heat or cool
• Variety of chain options for various application needs
• Minimum surface area reduces sanitation and cleaning time
FrAme InTeGrATed Conveyor SIde TABLeS dIverTerS And GATeS
One-piece design improves sanitation and facilitates additional assembly operations on the conveyor.
• Stainless steel operator side tables can be formed from the side of the conveyor
• Up to 10” (254 mm) wide
• Located on one or both sides of the conveyor
• Changes product direction to single or multiple locations.
• Often used to meter flow to specific areas or to separate products based on certain attributes.
• Control via proximity switches, photo eyes, coun-ters and PLCs.
• Motion can be achieved via pneumatic or electric components.
• Available in a variety of materials.
seCtioN titLeeNGiNeered appLiCatioNs
50
pROduCt OffERINg
aquapRuf® famIlY of Sanitary ConveyorSStainless Steel Construction; 7400, 7600 and Ultimate Series
• Straight, curve, incline and decline configurations
• Belt and modular belt options• Wash-down and sanitary environments
• Clean rooms• Chemical Resistance • USDA, FDA, BISSC
6200 sERIEs Low ProfiLe BeLt ConveyorSStainless Steel Construction
• Tight space• Basic conveying needs• Wedge-Lok™ system• Metal stamping
• Rugged environment• Part accumulation• Small part transfer
3200 sERIEs heavy duty BeLt ConveyorSAluminum Extruded Construction
• Straight, inclined and elevating configurations
• High performance conveying • Main line, long lengths
• Heavy duty applications• Fast belt speeds • Aesthetics • iDrive
aquagaRd® famIlY of Sanitary ConveyorSStainless Steel Construction; 7200, 7300, 7350, and 7360
• Straight, curve, incline and decline configurations
• Belt and modular belt options• Industry leading speeds• Small parts transfers
• Easy to accessorize - No drilling required
• 10 guiding packages available
5200/5300 sERIEs heavy duty ChainAluminum Extruded Construction
• Straight, curve, incline and decline configurations
• High performance conveying • Main line, long lengths
• Heavy duty applications• Fast belt speeds • Part accumulation• Automated and manual assembly
2200/2300 sERIEs Low ProfiLe BeLt ConveyorSAluminum Extruded Construction
• Belt and modular belt options• High performance conveying• Streamlined machine interface• Small parts transfers• Efficient use of space
• Accumulation• High temperatures• Sharp parts• Aesthetics• iDrive
From metal stamping to automated assembly, to food processing to packaging, we have the right conveyor for your application.
www.dorner.com • [email protected] MFG. CORP.PO Box 20 • 975 Cottonwood AveHartland, WI 53029 USA
INSIDE THE USA TEL: 800.397.8664FAX: 800.369.2440
OUTSIDE THE USATEL: 262.367.7600FAX: 262.367.5827
Dorner Mfg. Corp. reserves the right to change or discontinue products and specifications with or without notice.All products and services are covered in accordance with our standard warranty.
© Dorner Mfg. Corp. 2010. All Rights Reserved. 851-598 Rev. G Printed in the U.S.A. 3M-RYL-1210