-
Conveyor Systems In Singapore
-
Feige Filling Technology Pte Ltd offers four main types of
conveyor systems, namely carrying chain conveyor for pallets,
pallet roller conveyor, drum roller conveyor, and container roller
conveyor.
-
A conveyor system is defined as a piece of machinery equipment
that can be deployed to transport items from one specified physical
starting location to another ending location. These items are
usually large in quantity or size which are not possible to be
transported easily with human labor. Hence, a conveyor system
enables many items to be transported easily, quickly and
efficiently.
-
The carrying chain conveyor is a heavy duty conveyor that can
handle pallets with gross weight of up to 2000 kilograms. Items are
placed onto the bottom transverse deck of pallets or single spacer
blocks which are then safety transported to its required location
by the conveyor.
The carrying chain is supported by low fiction plastic profile
which provides resistance to wear. It is able to be operated with
2, 3, 4, or 5 chains. For example, 2 chains can be used for empty
pallets while 3 chains can be used for full pallets.
-
The conveyor is propelled by gear motors and can achieve a
typical speed of approximately 9 meters per minute. Option for
varying this speed is available for situation if faster or slower
operations are required.
Reversible drive is available in the event that dual direction
is required. The conveyor can be raised and lowered to transport
pallet onto another pallet roller conveyor that is placed
perpendicularly.
Sensors and programmable logic controller ensure that the entire
process is safely operated. The supporting structure of the
conveyor system is made of galvanized steel.
-
Galvanized steel is produced by coating zinc onto steel sheets.
The end result is that the galvanized steel has the added advantage
of being resistant to corrosion. Normal steel is made of iron and
carbon that can corrode when it comes into contact with any water
moisture.
This corrosion will continue to degrade the steel to the extent
that it fails to perform what it is initially intended for. Feige
provides the option of using stainless steel instead of galvanized
steel if durability is a concern and cost is not an issue.
-
The pallet roller conveyor is a heavy duty conveyor that can
handle pallets with gross weight of up to 2000 kilograms. Its side
frame is made of stainless steel while the rollers are made of
galvanized steel. The rollers can be customized to stainless steel
if required for more stringent conditions. The roller to roller
drive chain is three quarter inch. The default roller pitch is
approximately 200 millimeters.
-
The conveyor is propelled by gear motors and can achieve a
typical speed of approximately 9 meters per minute. Option for
varying this speed is available for situation if faster or slower
operations are required. Reversible drive is available in the event
that dual direction is required. For single pallet place, the
pallet roller conveyor can be non-driven that makes use of gravity
to transport items to its destination.
-
Feige Filling Technology Asia Pacific Pte Ltd.
Contact Us:
No. 6 Loyang Lane #02-03Singapore 508920
Tel : +6565464955Fax : +6565468870
Email : [email protected] :
http://www.feigeasia.com.sg/
To Order Find Out More Information On Conveyor SystemsPlease
Come And Visit Us Today Onwards..!
