397

ROB-75700 CoolTech Coolant Exchanger(Intercambiando de Refrigerante de CoolTech)• 10-minute exchange process means no more waiting for the engine to warm up!

• “engine Off” feature removes pulleys, belts, and fan blades from the safety equation.

• Vacuum mode creates a “push/pull” exchange process allowing the technician to safely remove high pressure in a hot system.

• Leak check feature allows the technician to test for leaks prior to refilling.• 2 clearly marked valves and an easy-to-read gauge make this machine veryeasy to use.

• No electricity required. 90 psi shop air drives the exchange process, as well as the 2 gpm pump on the waste tank.

• 2 external new coolant supply tanks allow on-board storage of two different coolant types.

ROB-75700

RTI-MCX-2 Multiple Coolant Exchange (MCX) SystemOne machine for the quickest, most complete exchange—for any type of antifreeze! Comes standard with one 15-gal-lon waste tank and two 7.5-gallon fill tanks for two differentantifreeze types. Additional tanks are available at a low cost.“Engine Off” operation, reverse flushing and extra pumpingpower provide the most complete coolant exchange. 92-98% single pass average exchange. Removes contamina-tion and particulates efficiently on a hot or cold vehicle fromthe engine block, water core, water pump, hoses and radia-tor. Operating range 32° to 122°F (0° to 50°C). (122 lbs.)

RTI-MCX-2

Cooling System

COOLANT EXCHANGERS

Cooling System

AST-7858 Pressure Tester(Probador de Presión)• Anodized aluminum adapters for most foreign & domestic automobiles. • Temperature Gauge • Pressure Testing Pump

MTY-MV4530 Pressure Test Kit (Kit para Probar Presión)Quickly reveals external cooling system leaks, and detects internal leaks caused by blownhead gasket, cracked block or head. Includes pressure pump with 2’ (610mm) hose andrelief valve, four adapters for cooling systems on most domestic and Asian vehicles, adapterwrench, manual and case.

STA-12270 Cooling System/Cap Pressure TesterUse anywhere a regular cap will fit. Flexible 14" hose connects radiator adapter to testerbody. Color coded large 2" dial. Noncap testing pressure ranges of 17-19 lbs., 20 lbs., and28-30 lbs. Complete with instructions and plastic storage case.STA-12555 Leather Cup STA-12559 SpacerSTA-12704 Hose & Head Kit

PRESSURE TESTERS

AST-7858

STA-12270

MTY-MV4530

398

KDT-3700 Master Cooling System Test Kit(Kit Master para Probar el Sistema de Refrigeración)Pressure test both cooling systems and radiator caps with one kit!Universal cooling system adapter with patented “Bladder System”allows for virtually 100% coverage for domestic and foreign cars.Includes hand pump with gauge, universal cooling system adapter, 4radiator cap adapters (8 sizes), molded case.

KDT-3700

TESTERS/WATER PUMP TOOLS

MTY-MV4535 AirEvac KitRefill automotive cooling systems in minutes without trapping air that can cause over-heating. Uses compressed-air-operated venturi to refill system under vacuum.Includes 2-1/2” (65mm) diameter diaphragm style vacuum gauge, venturi vaccum,valve coupler, universal cooing system adapter, two 30” (760mm) extension hoses, 5’(1.5m) coolant refill hose, manual and case.

UVW-550000 Airlift Kit (Kit de Puente Aéreo)The new Airlift system purges those problematic airlocks, checks for vacuum leaks andthen allows the technician to refill the system quickly and easily. Simply connect yourshop air to airlift and pull vacuum. Check for leaks, and then refill in seconds.UVW-983700 Replacement Gauge

UVW-570000 Vac-U-FillUsed to remove and refill cooling systems•Connect easily—no need to cut heater hoses or disconnect radiator hoses•Tests for eliminates potential airlock problems•Accurately pre-mixes water and anti-freeze in 3 gallon holding reservoir• Safely stores used coolant in large 12 gal. environmentally friendly holding reseroir•Operates completely on shop air•Requires 90 psi (6.26 bar) 4.2 cfm•Weight: 49 lbs

UVW-550000

UVW-570000

Cooling System

MTY-MV4535

399

AST-7880 LIS-13800

WATER PUMP TOOLS• HERRAMIENTAS PARA BOMBAS DE AGUA •

AST-7880 North Star Water Pump Socket(Dado para Bomba de Agua de North Star)For use with North Star Pump Pulley Removal Tool.

LIS-13800 Water Pump Sprocket Holder for GM Ecotec(Retenedor de Rueda Dentada de Bomba de Agua para GMEcotec)Securely holds water pump sprocket preventing loss of timing or damage to theengine. Special half-moon design allows easier access to water pump gear bolts.Uses access cover bolts to hold the tool in place. (4 oz.)

Cooling System

400

ADAPTERS

RADIATOR ADAPTERS• ADAPTADORES PARA CAMIÓNES •

MTY-MV4506 Universal Radiator Adapter(Adaptador Universal para Camión)Solid rubber (non-bladder) adapter replaces as many as 25 other costly radiatoradapters. Compatible with all brands of radiator pressure testers. (1lbs)

STA-12450 Truck Adapter Kit(Kit de Adaptadores para Camiónes)Consists of two solid die cast, chrome-plated cap and radiator adapters. Fits allpopular trucks having the larger diameter filler neck. Includes 7/8" thick rubberplug.

MTY-MV4506

STA-12450

ADAPTERS• ADAPTADORES •

ApplicationsSTA-12018 Threaded adapter fits many Volvo, Saab and late model

Renault cooling systems with a threaded filler neck on the expansion tank.

STA-12021 For small (45mm OD) caps used on many late modelToyota, Nissan, Subaru, Mitsubishi and Honda cars.

STA-12025 Small (31mm ID, 10mm deep) diameter cooling filler neckapplications, including Acura, Chevy, Dodge, Eagle, Geo,Honda, Isuzu, Lexus, Mitsubishi and Toyota.

STA-12026 Threaded adapter for GM "N" body, Saturn and some full-size Fords.

STA-12027 Small (32mm ID, 16mm deep) diameter for all filler necktesting, including later model Ford, Ford Truck, Honda, Hyundai, Infiniti, Isuzu, Kia, Mazda, Mitsubishi, Nissan, Toyota.

STA-12028 System testing adapter is required to test 1990 and newer Volkswagen cooling systems with a threaded filler neck.

STA-12029 Threaded cap testing adapter for the threaded radiator capon GM "N" body cars as well as Saturn and most Ford cars and trucks.

STA-12030 Threaded system testing adapter for 1988 and newer BMWcooling systems with a threaded filler neck.

STA-12032 Threaded cap testing adapter for many 1999 and newer GM cooling systems with a threaded filler neck including Buick, Chevrolet, Chevrolet Truck, GMC Truck, Isuzu, Oldsmobile, and Pontiac.

STA-12034 Threaded adapter for cooling systems on the 1995-98 FordContour and Mercury Mystique and the 2004-00 Ford Focus.

Cooling System

401

HOR-731

SKT-7408

Ideal for use on radiator and heater hoses, water, air, vacuum and fuel lines, thesetools are made from high carbon, heat-treated steel with a black oxide coating forextended life. They feature hardened steel pivots, extra-long cushioned grips, andpatented clamping mechanism locks automatically.

OVERALL DIAMETER LENGTH WEIGHT

KDT-3791 3/4” 5.50” 4 oz.KDT-3792 1-1/4” 9.25” 12 oz.KDT-3793 2-1/2” 14.00” 20 oz.

AST-9409 Hose Clamp Pliers(Alicates para Grampa de Manguera)Allows for extra reach where others can’t — removal and locking of clamps intoopen position and plastic and/or metal self-tightening hose clamps with diametersfrom 11/16" to 2-1/2".

HOR-731 Flexible Hose Clamp Pliers(Alicates Flexible para Grampa de Manguera)Flexible shaft holds position to reach tight access areas without guidance by hand,and ratcheting stainless steel twisted-strand wire holds 700 ft. lbs. of torque.

KDT-145 Hose Pinch-0ff PliersEliminate the need to drain cooling system when servicing. Pliers squeeze hosesshut and jaws swivel for parallel clamping. Pliers include automatic locking ratch-et.Tool can be used to pinch off some emission system hoses. Do not use on wire-reinforced hose.

KDT-429 Hose Clamp Pliers(Alicates para Grampa de Manguera)Pliers latch in position to securely hold Corbin clamps when they are expanded tomake removing and installing ring-type clamps easy. Slotted jaw tips swivel to gripat any angle. Clamps are not included.

KDT-3252 Flat Band Hose Clamp Pliers(Alicates para Grampa de Manguera de Banda Plana)Pliers remove and install newer-style flat band clamps used on various hoseassemblies. Use pliers on Ford, GM and some imports.

KDT-3444 Large Hose Clamp Pliers(Alicates Grande para Grampa de Manguera)Pliers are for use on Ford, GM, Chrysler and some import vehicles for the removaland installation of flat-type hose clamps. Features a fine-tooth locking ratchet tolatch pliers in position. It’s large size is perfect for heavy-duty jobs.

KDT-3454 Angled Hose Clamp Pliers(Alicates para Grampa de Manguera de Angulo)Use pliers to remove and install flat-type hose clamps in hidden and hard-to-reachareas. This tool is a variation of our popular 3252 Flat Band Hose Clamp Pliers andfeatures 45° jaws with swivel tips to grip at any angle and pliers that latch secure-ly in position.

SKT-7408 Hose Clamp Pliers(Alicates para Grampa de Manguera)Chrome plated, polished face. Two position adjustment accommodates all sizeclamps. Cushion grip handles. Length 8".

KDT-429

KDT-3252

KDT-3444

KDT-3454

AST-9409

KDT-145

HOSE CLAMP PLIERS

KDT-3791KDT-3792KDT-3793

Cooling System

402

HOSE CLAMP PLIERS KITS • KITS DE ALICATES PARA GRAMPA DE MANGUERA •

AST-9406 7-Piece Hose Clamp Pliers Assortment Kit(7 pzs. Surtido de Alicates para Grampa de Manguera)Remove and replace hose clamps and hoses in almost any application. Includes cable hoseclamp pliers with locking clamp; flat band and angled flat band hose clamp pliers with 360°rotating jaws; hose remover pliers for easy removal of 5/32"–1/2" vacuum and fuel hoses; “ +” slot and “V” slot swivel jaw hose clamp pliers with locking jaws, and Clic-R collar pliers fortype Clic and Clic-R.

MAY-28655 2-Piece Hose Clamp Pliers Kit(2 pzs. Alicates para Grampa de MangueraIncludes spring-loaded hose clamp plier, and new easy access hose clamp plier with 360°hooking capability for access to any hose clamp with diameters 3/4” – 2-1/16”. MAY-28650 Spring-Loaded Hose Clamp Pliers

KDT-3588

AST-9406

MAY-28655

HOSE CLAMP SETS

KDT-3588 3-Piece Line Clamp Set (3 pzs. Set de Grampas)Provides clamps for fuel, vacuum, brake and cooling systems. Madeof tough heat resistant reinforced nylon, each clamp includes a lock-ing mechanism.KDT-3585 Small, 2 clamps for sizes 1/8 to 5/16 KDT-3586 Medium, 1 clamp for sizes 1/2 to 3/4 KDT-3587 Large, 1 clamp for sizes 3/4 to 2 1/4

ATD-5465 3-Piece Hose Pinch-Off Pliers Set(3 pzs. Set de Alicates para Manguera)Cocking ratchet mechanism holds pivoting jaws tightly in placeto shut off flow through vacuum, fuel, and coolant lines. Includes8”, 10”, and 12” pliers. (2.7 lbs.)

ATD-5465

Cooling System

403

HOSE PINCHERS/CUTTERS/TOOLS

LIS-62450 Heater Hose Coupler Repair Kit(Kit para Reparación de Acoplador de MangueraCalentador)Removes even the most corroded heater hose couplers on GM vehiclesusing the 3.1L, 5.0L, 5.7L and 6.5L engines. Includes storage case with tray. LIS-62200 Heater Hose Coupler Remover

HOSE PINCHERSLIS-22850 2-Pack Hose Pinchers A quick, easy way to pinch off vacuum lines, fuel lines, etc. without damag-ing the line.

HOSE CUTTERS• CORTADORES DE MANGUERA •

KDT-3549 High-Leverage Hose Cutter(Cortador de Manguera de Alto Apalancamiento)• Cutter hooks hose for one-handed operation.• High leverage design coupled with the razor sharp blade makes cuttinghoses a cinch.

• Works especially well on heater hoses, providing a straighter, more pre-cise cut.

KDT-3550 Large Rubber Hose Cutter(Cortador Largo de Goma de Manguera)Works on large rubber radiator hoses and makes quick clean cuts. The razorsharp blade can be re-sharpened and the handle is designed to trap andhold the hose for a straight line cut.

HOSE CLAMP VISES• TORNILLO DE BANCO PARA ABRAZADERAS DE MANGUERA •

Relieve clamp spring pressure in very tight spaces. Ramp on jaws guide tabof clamp into correct position and traps it in the slot for safety. Tightenknurled knob by hand or use 1/4”-drive ratchet.LIS-44500 3” long, opens to 1-1/2” LIS-44480 3-5/8” long, opens to 2-1/8”

KDT-3550

KDT-3549

LIS-22850

LIS-62200 LIS-62450

RADIATOR TOOLSCooling System

404

THX-318

THX-319

PLE-75025 3-Gallon Capacity Radiator Filler•Tough polyethylene won’t damage automobile finishes• Impervious to oil, gasoline, and antifreeze

THX-318 Heater and Radiator Hose SlitterSpeeds hose replacement. Just slit hose and peel off. Double cutting edges slit by push-ing or pulling. Angled blade pulls into material, very little pressure is required. Cuts rightto firewall. Comfortable vinyl grip.

THX-319 Cooler Line Plugs(Tapones de Línea de Enfriador)Transmission cooler line plugs fit all 1/4", 5/16" and 3/8" tubes, male or female. Workslike a faucet valve. Allows vehicle to be driven from service bay with radiator off. 16"chain can be used to support tubes. Slip fork behind nut and tighten screw. Works onfuel lines, too.

PLE-75025

LIS-20900 Radiator Cap Pliers(Alicates para Capas de Radiador)Fast, safe removal of all standard radiator caps. Simply engagethe pliers over the cap, press down, rotate and release.

LIS-24700 Radiator Cap Wrench for GM (LLave de Tapa del Radiador para GM)Provides an extra grip to remove stubborn radiator caps.Use with 3/8” square drive for extra leverage. For use onmany Chevrolet, GMC, Pontiac, Oldsmobile and Buick vehi-cles with threaded plastic radiator caps including Cavalier,Malibu, Trailblazer & some pickups, Sunfire, G6, Alero andLeSabre. (6 oz.)

REFRACTOMETERS

ATD-3705

Cooling System

405

ATD-3705 Coolant Refractomoter (Refractómetro de Refrigerante)• High-quality refractometer offers a fast, easy way to test the freezing point ofcoolant/anti-freeze

• Works with Ethylene or Propylene Glycol or long-life anti-freeze• Also measures battery acid gravity to determine battery life• Automatic temperature compensation• Large, easy-to-read graphics and high-contrast lens• Adjustable viewfinder; rugged, steel body construction• Includes storage case, fluid dropper, cleaning cloth and mini screwdriver

ROB-75240 Antifreeze and Battery Refractomoter(Refractómetro de Anticongelante y Batería)Measures freezing point of Propylene Glycol or Ethlene Glyco (including DexCool®) based cooling systems. Will also check strength of windshield washerfluid and battery electrolytes. Scale range 32°F to -60°F. Adjustable lens focusand calibration adjusting screw.(1 lb.) ROB-75240

Cooling System

406

THX-100

THX-101

THX-106

ACU-1550ACU-3001

ANTIFREEZE TESTERS

TESTER APPLICATION GUIDE

COOLANT TYPES

THX-100 Propylene Glycol, such as Sierra®, Prestone® LowTox, etc.THX-101 Ethylene Glycol, such as Dex-Cool®, Prestone®, Zerex®, etc.THX-102 Ethylene Glycol, such as Dex-Cool®, Prestone®, Zerex®, etc.THX-106 Ethylene Glycol, such as Dex-Cool®, Prestone®, Zerex®, etc.THX-107 Propylene Glycol, such as Sierra®, Prestone® LowTox, etc.

THX-102

THX-107

EZR-102

ACU-1550 Coolant Test Strips for Passenger Cars(Probar Fluido Refrigerante Dos-Modalidades)For Ethylene and Propylene Glycol Coolants Tests for freezepoint, boiling point and acid corro-sion protection in most gasoline-driven, water-cooled engines. Ideal for conventional and long-life coolants, including Prestone®, Zerex®, Peak® and Dex-Cool®. 70 strips per bottle.

ACU-3001 3-in-1 Heavy Duty DieselTests Nitrite, freezepoint boilover and ph corrosion protection concentration. For Detroit Deiseland Penray Coolant systems.

EZR-102 AntiFreeze Tester (Probador de Anticongelante)Range +32°F to -60°F.

THX-100 Cold-Chek® Propylene Glycol Antifreeze and Coolant Tester (Probador de Anticongelante y Refrigerante de Propylene Glycol de Cold-Chek®)For testing freeze protection in automotive radiators and fresh-water systems in RVs and boats.Tests protection of propylene glycol-based antifreeze to -50°F. Balls will float to show freezeprotection. Accurate readings at any temperature, hot or cold. Easy to use and read. Instructioncard has protection scale. Break-resistant tube.

THX-101 Antifreeze and Coolant Tester(Probador de Anticongelante y Refrigerante)Works on specific gravity principle, with degree of protection measured by number of floatingballs. Designed to be easy to use and read. Temperature compensating for testing with enginehot or cold. Accurate to -40°F. Neoprene rubber bulb and extra long neoprene dip tube.Complete with vinyl pocket protector case imprinted with instructions.

THX-102 Antifreeze and Coolant Tester(Probador de Anticongelante y Refrigerante)Same as THX-101 except has ABS chrome plated safety shield to prevent breakage.Instructions on shield.

THX-106 Disc-Type Antifreeze and Coolant Tester(Probador de Anticongelante y Refrigerante de Tipo Disco)Full size 16-1/4" anti-freeze tester has “6th disc” to show overprotection. Eliminate wastedantifreeze. Manufacturers suggest a 50/50 water-to-antifreeze solution (protection to -34degrees). Protection decreases in solutions over 70 percent and cooling efficiency is lost. The6th disc shows when too much antifreeze has been added. Made of tough break resistant SANplastic. Protection scale printed in both celsius and fahrenheit. One piece bulb and long neo-prene dip tube.

THX-107 Propylene Glycol AntiFreeze Cold-Chek® Coolant Tester (Probador de Anticongelante y Refrigerante de Propylene Glycol de Cold-Chek®)For testing propylene glycol anti-freeze used in automotive radiators and also for testing win-terized fresh water systems in RVs and boats. Number of floating discs measures level of pro-tection. Temperature compensating tester is accurate whether coolant is hot or cold. Readingsin Celsius and Fahrenheit,

UV & WHITE LED

UV LIGHTS & GLASSES

POWER POWERDESCRIPTION OUTPUT/TYPE SOURCE

TPD-TP1210 Replacement Bulb (f/TPD-TP1200) 120W 120V

TPD-TP1300 12V 3-LED Blue Leak Detection Lamp 100W 12VTPD-TP1390 TRITAN™ 365 UV Lamp 600W 120V

TPD-TP1510-0001 Replacement Bulb (f/TPD-TP1500,TP8200) 50W 12VTPD-TP1810 Replacement Bulb (f/TPD-TP1800) 35W 12VTPD-TP8010-0001 Replacement Bulb (f/TPD-TP8000) 100W 12VTPD-TP8115 Replacement Bulb (f/TPD-TP8100,TP8200) 50W 12VTPD-TP8620CS OPTI-Lite™ Cordless, 50W 3-AA

Economy 6-LED Leak Detection Flashlight Batteries (incl)TPD-TP8640CS Optimax Jr.™ 75W 3-AA

Batteries (incl)TPD-TP8690 Optimax™ 3000 Cordless Rechargable

Super High-Intensity LED NiMH Battery (Charger incl.)

TPD-TP8690UV Optimax™ 365 Focused Beam 600W RechargableUV LED Leak Detection Flashlight NiMH BatteryUltra-high intensity (Charger incl.)

Cooling SystemTPD-TP8640CS

TPD-TP8620CS

FREEHOLSTER

TPD-TP1300

TPD-TP8690

TPD-TP8690UV

TPD-TP1390

• Super bright• Power output equivalent to 600W

• Great for diesel engines

407

TPD-TP9940Fluorescence Enhancing Glasses(Lentes para ResaltarFluorescencia)

EZR-L41ZTUV 40 LED UV Flashlight(Linterna UV de 40 LED)Detect antifreeze and other auto fluidleaks with the super bright UV func-tion with 40 extremely bright LED’sfeaturing double stage technology.Works as a UV spotlight and flash-light. Includes 4 AAA batteries.

Cooling System

408

TPD-TP8627 Complete OPTI-Lite™ /EZ-Ject™ Kit The easiest, most accurate and most compact method of servicing avehicle’s A/C system with dye. Includes OPTI-Lite™ 6-LED, flashlight,EZ-Ject™ injector with universal A/C dye cartridge, 1 oz. bottle Dye-Lite® All-In-One™ standard dye for oil, fuel, ATF, PS and hydraulic leaks,1 oz. bottle Dye-Lite® coolant/auto body leak dye, fluorescence-enhanc-ing glasses, and plastic case.

TPD-TP8621 Complete LeakFinder™ Kit Pinpoints A/C, oil, fuel, ATF, PS, hydraulics, and coolant leaks. IncludesOPTI-Lite™ 6-LED, economy leak detection flashlight, Syringe A/C dyeinjector with hose for R-134a and R-12 adapter/purge fitting, 1 oz. bot-tle co-solvent free universal A/C dye, 1 oz. bottle Dye-Lite® All-In-One™ standard oil dye, 1 oz. bottle Dye-Lite® coolant dye, servicesand 8 oz. bottle of GLO-AWAY™ dye cleaner, fluorescence-enhancingglasses, and case.

TPD-TP8626 OPTI-Lite™/EZ-Shot™ A/C Kit Includes OPTI-Lite™ 6-LED leak detection flashlight, 8 oz. spray bot-tle of GLO-AWAY™ dye cleaner, fluorescence-enhancing glasses, andplastic carrying case. Also includes EZ-Shot caulk gun style A/C dyeinjection kit with hose/coupler for R-134a systems and R-12adapter/purge fitting and 8 oz. universal A/C dye cartridge. • TPD-TP8646 Same as above with better OPTIMAX Jr™ light.

GOOD

BEST

BETTER

OEMAPPROVED

OEMAPPROVED

OEMAPPROVED

FLUID LEAK DETECTION KITS

UV/BLUE™ LAMP KITS• KITS DE LAMPARAS UV/BLUE™ •

The most powerful leak detection lamps on earth! Revolutionary and patented dichroicfilter lens technology that produces up to 30 times more usable leak detection lightthan competitive lamps. They are highly concentrated, glow the brightest, are solventfree and meet SAE J2297 standards. Tracer A/C dyes are installed by automakers in theUS, Japan, Europe and Korea.

TPD-TP8000AK Super-High Intensity Light with 100WInstant-On BulbKit includes blow-molded storage case, 12' coiled cord with alligator clips and fluores-cence-enhancing glasses.TPD-TP8010-0001 Replacement Bulb (0.2 lbs)

TPD-TP1130 Complete LeakFinder™ Auto Body KitQuickly spot those hard-to-find leaks in truck trailers, around windows and bodyseams. Kit includes high-intensity, 50-watt UV/Blue™ lamp, adapter cord and alligatorclips, 8 oz, twin-neck bottle of fluorescent water dye, fluorescence-enhancing glassesand plastic carrying case.

TPD-TP8000AK

TPD-TP1130

TPD-TP8626

TPD-TP8627

TPD-TP8621

Cooling System

409

UV DYE & OIL INJECTORS

MST-82375 R134a Oil Injector(Inyector de Aceite para R134a)Adds oil by allowing vacuum to pull it in after evacuation process, or userefrigerant topush it in using the recharge process. Rugged metal 2 oz. canister.

TPD-TP9790 Ez-Shot™ Universal A/C Dye Injection Kit (Kit EZ-Shot™ Universal de Inyección de Tintura para Aire Acondicionado )EZ-Shot quickly introduces dye into a vehicle’s A/C system. Includes R-134a hose withR-12 fitting and 8 oz. BigEZ cartridge for servicing up 64 vehicles.

TPD-TP9841CS EZ-Ject™ Universal A/C Dye Injection Kit(Kit EZ-Ject™ Universal de Inyección de Tintura para Aire Acondicionado )Steel assembly comes with and R-134a hose with R-12 adapter/purge fitting, plus 1 uni-versal AC dye cartridge, which services up to 14 vehicles.

UVW-471500 Spotgun™Includes R134a & R12 fittings, and 8oz. universal dye for up to 64 vehicles.

MST-82375

TPD-TP9841CS

TPD-TP9790

UVW-471500

FAN CLUTCH TOOLS

ATD-8606AST-7895

AST-7895 10-Piece Fan Clutch Wrench Set (10 pzs. Set de Llave para Embrague de Ventilador)Set includes: Pulley and fan clutch bolt holding tools from 2-1/4” to 3”. Fan clutchwrenches from 2-13/16”. (16 lbs.)

ATD-8606 24-Piece Serpentine Belt & Fan Clutch Tool Set(24 pzs. Set de Herramientas para Embrague de Ventilador yCorrea Serpentina)The most complete kit available to service most domestic and import vehicles.Includes serpentine belt holder and assorted fan clutch, pulley and hub holdingtools, wrenches, and sockets.

KDT-3472 Fan Clutch Wrench Set(Set de Herramientas para Embrague del Ventilador)Includes the universal pulley holder, and fan clutch wrenches. Used to remove andreplace thermostatic fan assemblies while eliminating the need for various sizeholding wrenches. Applications include: Ford trucks w/ 2.8L, 2.9L, 3.0L, 4.0L, 4.9Land 5.0L engines. Dodge trucks w/3.9L, 5.2L, 5.9L, 8.0L V10 engines. GM trucks w/4.3L, 5.0L and 5.7L engines. Jeeps w/ 5.2L engines.

LIS-41800 Fan Clutch Wrench Set for Ford(Set de Herramientas para Embrague del Ventilador de Ford)Removes and installs Ford fan clutches when repairing or replacing the water pump,timing chain or the fan clutch. Includes 2 holding wrenches and 2 open-end wrench-es. The double-ended wrench and small holding wrench work on 2.8, 2.9, 3.0, 4.0and 4.9 liter engines. The larger open-end wrench and larger holding wrench fit 6.9and 7.3 liter diesel engines. Wrenches are available individually. (7 lbs. 3 oz.)

LIS-42920 2-Piece Universal Fan Clutch Wrench Set(2 pzs. Set de Herramientas Universal para Embrague delVentilador)Removes and installs fan clutches. Includes a universal holding wrench and a uni-versal turning wrench. The holding wrench is adjustable to fit the bolts that attachthe pulley to the water pump. The turning wrench has the 5 common fan clutch nutsizes built into one tool: 7/8" (22 mm), 1-7/16" (36 mm), 1 9/16" (39 mm), 1-7/8"(47 mm) and 2" (50 mm). Both wrenches are long to provide extra leverage for stub-born fan clutch nuts. Made of heat treated alloy steel to provide strength.(8 lbs. 5 oz.)

LIS-43300 Pneumatic Fan Clutch Wrench Set(Set de Herramientas Neumática para Embrague del Ventilador)Quickly removes & installs fan clutch when repairing the water pump or fan clutch.Does the job much faster and easier than conventional fan clutch wrenches. Noholding wrench is necessary. The set includes 7 driving wrenches that fit Ford, GMand Chrysler. Driving wrench sizes include: 36mm, 1-1/2", 1-9/16", 41mm, 42mm,1 7/8" and 2". Use with an air hammer. (9 lbs.)LIS-43370 Handle Assmebly

LIS-44180 Fan Clutch Spanner Wrench(Herramientas para Embrague del Ventilador)For GM, Jeep and Dodge Trucks, Vans and SUVs With Pressed on Water PumpPulleys. The double-ended spanner wrench fits the holes in pressed-on water pumppulleys. Hold the pulley firm with the spanner wrench. Use the appropriate open endwrench to turn the fan clutch nut (41740 36mm turning wrench works on manyapplications). (2 lbs. 5 oz.)

LIS-42920

LIS-44180

LIS-43300

KDT-3472

LIS-41800

Cooling System

410