Upload
lamlien
View
220
Download
0
Embed Size (px)
Citation preview
Copper and Brass Wires and Copper Wires and RodsTechnical Information
Copper and Brass WiresCopper Wires OFHC Copper Rods OFHC
Copper and Brass Wires and
Copper and Brass WiresAlloys – 102, 110, 122, 230, 260, 270, 353 e 360.
Round WiresAlloy 102 – 1.50 to 9.97 mm (just pressed and/or annealed from 1.50 to 19 mm).Alloys 110 and 122 – 1.50 to 23.70 mm.Alloys 230 and 260 – 1.40 a 6 mm.Alloy 270 – 1.50 to 22.22 mm.Alloys 353 and 360 – 1.50 to 10.50 mm.
Square WiresAlloy 102 – 2.38 to 13.50 mm.Alloy 360 – 4 to 6.35 mm.
Rectangle WiresOther alloys and dimensions on request.
Round Wires Inner Diameter from 330 / 350 / 400 / 450 / 500 / 600 mm.
Square and Rectangle WiresInner Diameter from 400 / 580 / 700 / 800 mm.
Weight of Rollers (all mentioned above) Minimum 40 Kgs and Maximum 120 Kg.
- Surface finish: Bare.- Supply conditions:(coiling – spiral and sheets)
Dimensional Limits
Diameters and Weight
Other alloys, dimensions and sizes, please consult us for more details.
Copper and Brass Wires
Nominal Diameters from 1.38; 1.45; 1.63; 1.83; 2.30; 2.59 and 2.91 mm.
Dimensional Limits
Copper Wires OFHC (Oxygen-free High Conductivity Copper) Alloy 102.Copper Wires OFHC
All high conductivity coppers contain some oxygen because of the copper refining process but some applications require copper with the highest purity and lowest oxygen levels, known as Oxygen-Free High Conductivity Copper (OFHC).
102 alloy (Cu-OF) has a minimum copper percentage of 99.95% and the maximum oxygen of 0.001% (up to 10 ppm).
This alloy is manufactured with pure copper cathode, which is melted in a furnace exposed to the protected environment with a thick layer of graphite, ensuring of almost 100% non-oxygen.
- Surface Finish: Bare.- Supply conditions (wires packaging in boxes)- Inner and Outer Diameter: 600 and 1100 mm- Weight: 1.000 Kg.
Other alloys and dimensions upon request
Other alloys and dimension upon request
Nominal Diameters from 8.00; 12.50; 16.00; 20.00 and 25.00 mm.
Dimensional Limits
Copper Rods OFHCAlloy 102.Copper Rods OFHC
- Surface Finish: Bare .- Supply conditions: Coils (rods packaging in pallets)- Inner and Outer diameter : 1000 and 1800 mm- Weight: 4000 Kg.
Other standards or individual requirements, please consult us for more details.
Wires Binary Brass – ASTM B134/ASTM B250Wires Ternary Brass – ASTM B16/ ASTM B453/ASTM B250Copper Wire OFHC – ABNT NBR 5111Copper Rods OFHC – ABNT NBR 14733
International and National Standards for Drawn Products(Brass Wires; Copper Rods and Wires OFHC)International and National Standards for Drawn Products(Brass Wires; Copper Rods and Wires OFHC)
Further sizes and special grades on request
Mechanical properties, including tempers Mechanical properties, including tempers
AlloyMinimum Maximum
Limit of tensile strength(Kgf/mm2)
102, 110 and 122
230
260 and 270
353 and 360
19.9
28.1
28.1
28.1
41.8
74.0
88.9
58.0