Copyrights

Embed Size (px)

DESCRIPTION

revit architecture

Citation preview

Autodesk Revit 2014, Autodesk Revit Architecture 2014, Autodesk Revit MEP 2014, Autodesk Revit Structure 2014, Autodesk Revit LT 2014 2013 Autodesk, Inc. All rights reserved.

All use of this Software is subject to the terms and conditions of the Autodesk license agreement accepted upon installation of this Software and/or packaged with the Software.

This Product or Service may incorporate or use background Autodesk technology components. For information about these components, click here: http://www.autodesk.com/cloud-platform-components.

TrademarksAutodesk, AutoCAD, Buzzsaw, DWF, DWG, DWG TrueView, DXF, FBX, Freewheel, Heidi, Hoops, Revit, ShowMotion, SteeringWheels and ViewCube are either registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates.

Acresso, AdminStudio, FLEXnet Connect, InstallShield, InstallShield Developer, InstallShield DevStudio, InstallShield Professional, OneClickInstall, and QuickPatch are registered trademarks or trademarks of Acresso Software Inc. and/or InstallShield Co. Inc. in the United States of America and/or other countries.

ACE, TAO, CIAO, and CoSMIC are copyrighted by Douglas C. Schmidt and his research group at Washington University, University of California, Irvine, and Vanderbilt University, Copyright (c) 1993-2009, all rights reserved.

ArchVision, realpeople, and RPC are either registered trademarks or trademarks of ArchVision, Inc.

MicroStation and DGN are registered trademarks of Bentley Systems, Inc.

Spatial, ACIS, and SAT are either registered trademarks or trademarks of Spatial Corp. in the United States and/or other countries.

Intel, Xeon and Pentium are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

PANTONE and other Pantone, Inc. trademarks are the properties of Pantone, Inc.

Spatial, ACIS, and SAT are either registered trademarks or trademarks of Spatial Corp. in the United States and/or other countries.

D-Cubed is a trademark of Siemens Industry Software Limited.

Python is a registered trademark of Python Software Foundation.

mental ray is a registered trademark of NVIDIA ARC GmbH, licensed for use by Autodesk, Inc.

Citrix is a registered trademark and the Citrix Ready logo(s) is a trademark of Citrix Systems, Inc.

All other brand names, product names or trademarks belong to their respective holders.

PatentsProtected by each of the following patents: 5,287,408, 5,760,716, 5,818,460, 5,982,399, 5,990,864, 5,990,911, 6,058,219, 6,111,587, 6,144,382, 6,363,503, 6,628,285, 6,675,355, 6,888,542, 6,964,015, 6,992,685, 7,168,012, 7,254,235, 7,287,191, 7,325,166, 7,363,615, 7,634,324, 7, 761,266, 7,768,526, 7,860, 691, 8,131,517, and 8,212,806.

In addition to the patents listed above, Autodesk Revit Structure is also protected by each of the following patents: 7,856,342, 7,761,266, 7,788,068, 7,856,342, and 8,099,260.

Third-Party Software Credits and Attributions

Additional Disclaimer: The Citrix application is network-based, and performance of Autodesk Citrix Ready Applications may vary with network performance. The software does not include the Citrix application, nor does Autodesk provide direct support for issues with the Citrix application. Users should contact Citrix directly with questions related to procurement and operation of the Citrix application.-----

Portions relating to xerces-c_1_6_0.dll v. 1.6 1999-2004 The Apache Software FoundationPortions relating to xerces-c_2_6.dll v. 2.6.0 Copyright c Apache Software Foundation 2000 subject to licensing termsPortions relating to xerces-c_2_7.dll v. 2.7.0 Copyright c Apache Software Foundation 2000 subject to licensing termsPortions relating to xerces-c_2_8_AEC.dll v. 2.8.0 Copyright c Apache Software Foundation 2000 subject to licensing termsPortions relating to Xerces.Aec.dll v. 3.1.1 Copyright c 1999-2010 Apache Software Foundation; subject to licensing termsPortions relating to Castle Windsor v. 1.0.3.4333 are Copyright 2004-2011 Castle Project - http://www.castleproject.org/.Portions relating to Log4Net v1.2.10 are copyright 2009 The Apache Software Foundation.Portions relating to the Dynamic Link Library for Xalan-C++ Version 1.11.0 are The Apache Software Foundation.Portions relating to IronPython.dll v.2.7.21001 are [COPYRIGHT YEAR] IronPython Contributors.Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Portions relating to ASHRAE Duct Fitting Database Active X DLL Object Code form are 2003 American Society of Heating Refrigerating and Air Conditioning Engineers, Inc. (www.asluae.org) Used by permission. Portions relating to ASHRAE Duct Fitting Database Version v.5.0 are [COPYRIGHT YEAR] American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (www.ashrae.org) Used by permission.

2006 American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (www.ashrae.org). Material adopted by permission from ASHRAE Weather Data Viewer, Version 3.0 . The American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. assumes no liability for the use or contents of this software or its fitness for a particular application. The American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. has not reviewed this software and does not endorse, warrant, or certify its contents, use or application.

200..s-American Society of Heating, Refrigerating and Air-Conditioning Engineers , Inc. (www.ashrae.org). Used by permission. The American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. assumes no liability for the use or contents of this software or its fitness for a particular application. The American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. has not reviewed this software and does not endorse, warrant, or certify its contents, use or application.

Certain portions Copyright (c) 2008 Bentley Systems, Incorporated. All rights reserved. Contains Bentley DGN (TM) technology by Bentley Systems, Incorporated.

Portions related to Threading Building Blocks 2.1 v.4.0.2012.0408 are Copyright (C) 2005-2012 Intel Corporation. All Rights Reserved.

Portions Copyright 2002 ArchVision, Inc., All Rights Reserved.

Portions utilize Microsoft Windows Media Technologies. Copyright 1999-2004 Microsoft Corporation. All rights reserved.

Portions related to ACIS 19892001 Spatial Corp.

ACIS 19892002 Spatial Corp.

Portions of #ziplib v. 0.85.4.369 are contributed by various parties as indicated in the individual source code files. This Autodesk software contains #ziplib. #ziplib is licensed under the GNU General Public License v.2, which can be found at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html, with Classpath exception terms, which can be found at http://www.icsharpcode.net/OpenSource/SharpZipLib/. A text copy of this license and the source code for #ziplib (and modifications made by Autodesk, if any) are included on the media provided by Autodesk or with the download of this Autodesk software.

Portions relating to zlib v.1.2.5 are 1995-2012 Jean-loup Gailly and Mark Adler. This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler [email protected] [email protected]

Portions relating to FLEXnet Publisher v.11.11 are Copyright (c) 1987-2012 Flexera Software LLC. All Rights Reserved.

Portions relating to libCurl v.7.15.5 are Copyright (c) 1996 - 2012, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this software without prior written authorization of the copyright holder.

Portions relating to OpenSSL 0.9.8c are

Copyright (c) 1998-2006 The OpenSSL ProjectCopyright (c) 1995-1998 Eric A. Young, Tim J. HudsonAll rights reserved.

Portions relating to Info-Zip are Copyright (c) 1990-1999 Info-ZIP. All rights reserved.

For the purposes of this copyright and license, "Info-ZIP" is defined as the following set of individuals:

Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler, Antoine Verheijen, Paul von Behren, Rich Wales, Mike White

This software is provided "as is," without warranty of any kind, express or implied. In no event shall Info-ZIP or its contributors be held liable for any direct, indirect, incidental, special or consequential damages arising out of the use of or inability to use this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. Redistributions of source code must retain the above copyright notice, definition, disclaimer, and this list of conditions.

2. Redistributions in binary form must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution.

3. Altered versions--including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, and dynamic, shared, or static library versions--must be plainly marked as such and must not be misrepresented as being the original source. Such altered versions also must not be misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the altered versions with the names "Info-ZIP" (or any variation thereof, including, but not limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s).

4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.

Portions relating to Windows Template Library-WTL v.8.0 are Copyright (C) Microsoft Corporation. All rights reserved.

This file is a part of the Windows Template Library. The use and distribution terms for this software are covered by the Common Public License 1.0 (http://opensource.org/osi3.0/licenses/cpl1.0.php) which can be found in the file CPL.TXT at the root of this distribution. By using this software in any fashion, you are agreeing to be bound by the terms of this license. You must not remove this notice, or any other, from this software.

The source code for WTL v.8.0 (and modifications made by Autodesk, if any) is available from www.autodesk.com/lgplsource.

Portions related to KQOAuth v.0.97 are authored by Johan Paul ([email protected]) http://www.johanpaul.com. This Autodesk software contains KQOAuth v.0.97, as modified by Autodesk. KQOAuth v.0.97 is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for KQOAuth v.0.97, as modified by Autodesk, from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1.Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2.Identify:a.This Autodesk software name and release number;b.That you are requesting the source code for KQOAuth v.0.97, as modified by Autodesk; andc.The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this KQOAuth v.0.97 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.

You may modify, debug and relink KQOAuth v.0.97 to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions relating to OpenSSL toolkit v.1.0.0e are Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1.Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3.All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"4.The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected] derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.6.Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)" THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to OpenSSL toolkit v.1.0.0e are Copyright (C) 1995-1998 Eric Young ([email protected]). All rights reserved.

This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1.Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.2.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3.All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([email protected])." The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).4.If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([email protected])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to QAxContainer are Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies). All rights reserved. Contact: Qt Software Information ([email protected]). This software contains QAxContainer.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* Neither the name of Nokia Corporation and its Subsidiary(-ies) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to Qt v.4.7.2 are Copyright (c) 2011 Digia Plc and/or its subsidiary(-ies). All rights reserved. Contact: Qt Software Information ([email protected]). This Autodesk software contains Qt v.4.7.2. Qt is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for Qt v4.7.2 from www.autodesk.com/lgplsource or by sending a written request to:

Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903

Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify: a. This Autodesk software name and release number; b. That you are requesting the source code for Qt v4.7.2; and c. The above URL (www.autodesk.com/lgplsource)

so that Autodesk may properly respond to your request. The offer to receive this Qt source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.

You may modify, debug and relink Qt to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions relating to ACIS 19892001 Spatial Corp.

Portions related to Intel Threading Building Blocks v.4.0 are Copyright (C) 2005-2012 Intel Corporation. All Rights Reserved.

Portions related to Intel Math Kernel Library v.10.0.3 (www.intel.com/software/products/mkl) are Copyright (C) 20002008, Intel Corporation. All rights reserved.

This Autodesk software contains the following software components licensed from Siemens Industry Software Limited:

D-CubedTM HLM 2012. Siemens Industry Software Limited. All Rights Reserved.D-CubedTM CDM 2012. Siemens Industry Software Limited. All Rights Reserved.

Portions relating to Libxml2 2.7.8 Copyright (c) 1998-2003 Daniel Veillard. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Portions related to Qt MFC Migration Framework are Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies). This Autodesk software contains Qt MFC Migration Framework v.2.8, as modified by Autodesk, Inc.. Qt MFC Migration Framework is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for Qt MFC Migration Framework v.2.8, as modified by Autodesk, Inc., from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for Qt MFC Migration Framework v.2.8, as modified by Autodesk, Inc.; andc. The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this Qt MFC Migration Framework source code, as modified by Autodesk, Inc., via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink Qt MFC Migration Framework to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions related to Qt v.4.8.2are Copyright (c) 2009 Digia Plc and/or its subsidiary(-ies). All rights reserved. This Autodesk software contains Qt v. 4.8.2, as modified by Autodesk. Qt is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for Qt v. 4.8.2, as modified by Autodesk, from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1.Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2.Identify:a.This Autodesk software name and release number;b.That you are requesting the source code for Qt v. 4.8.2, as modified by Autodesk; andc.The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this Qt source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink Qt to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

This Autodesk software contains Qt Cryptographic Architecture v. 2.0.2 (QCA). QCA is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for QCA v 2.0.2 from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify:a. This Autodesk software name and release number;b. That you are requesting the source code for QCA v 2.0.2; andc. The above URL (www.autodesk.com/lgplsource)

so that Autodesk may properly respond to your request. The offer to receive this QCA source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software. You may modify, debug and relink QCA to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.Portions related to Threading Building Blocks v.4.0 are Copyright (C) 2005-2012 Intel Corporation. All Rights Reserved.

Portions relating to JPEG software is copyright 1991-1998, Thomas G. Lane. All Rights Reserved. This software is based in part on the work of the Independent JPEG Group.

libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Willem van Schaik libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage. Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions: 1. The origin of this source code must not be misrepresented. 2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source. 3. This Copyright notice may not be removed or altered from any source or altered source distribution. The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated.

Portions related to LuaPlus v5.1 are Copyright 19942008 Lua.org, PUC-Rio. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Portions relating to OpenEXR 1.6.0 Copyright 2004, Industrial Light & Magic, a division of Lucas Digital Ltd. LLC All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of Industrial Light & Magic nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to TIFF Copyright 1988-1997 Sam Leffler. Copyright 1991-1997 Silicon Graphics, Inc. All rights reserved. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.

THE SOFTWARE IS PROVIDED AS-IS AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABIBITLY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Portions relating to Libxerces-c 2.7.0 are copyright 1999-2000, 2004 The Apache Software Foundation. Licensed under the Apache License, Version 2.0 (the License); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an AS IS BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

This product includes the SwiftShader Software GPU Toolkit, Copyright (c) 2003-2011 Transgaming, Inc. All rights reserved.

Portions of this product include one or more Boost libraries, including V.1.46.1. Boost Software License Version 1.0 August 17th, 2003. Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the Software is furnished to do so, all subject to the following:The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Portions relating to EXPRESS Data Manager are intellectual property of Jotne EPM Technology A.S

Portions related to JPEG lib for release 8d of 15-Jan-2012 are Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding. All Rights Reserved. This software is based in part on the work of the Independent JPEG Group.

Portions related to Minpack are Copyright Notice (1999) University of Chicago. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. The end-user documentation included with the redistribution, if any, must include the followingacknowledgment:

"This product includes software developed by the University of Chicago, as Operator of Argonne National Laboratory.

Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear.

4. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY OF ANY KIND. THE COPYRIGHT HOLDER, THE UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, ANDTHEIR EMPLOYEES: (1) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT, (2) DO NOT ASSUME ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS, OR USEFULNESS OF THE SOFTWARE, (3) DO NOT REPRESENT THAT USE OFTHE SOFTWARE WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS, (4)DO NOT WARRANT THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS ERROR-FREE OR THAT ANY ERRORS WILLBE CORRECTED.

5. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDER, THE UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR ANY INDIRECT,INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR LOSS OF DATA, FOR ANY REASON WHATSOEVER, WHETHERSUCH LIABILITY IS ASSERTED ON THE BASIS OF CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR OTHERWISE, EVEN IF ANY OF SAID PARTIES HAS BEEN WARNED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGES.

Portions related to Approximate Nearest Neighbors (ANN) v.1.1.2 are Copyright (c) 1997-2010 University of Maryland and Sunil Arya and David Mount. All Rights Reserved. This Autodesk software contains ANN v.1.1.2. ANN v.1.1.2 is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license and the source code for ANN v.1.1.2 (and modifications made by Autodesk, if any) are included on the media provided by Autodesk or with the download of this Autodesk software. You may modify, debug and relink ANN to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions relating to Xerces-C++ v.3.1.1 are Copyright 1999-2010 The Apache Software Foundation. Portions relating to Xerces v.3.1 are [COPYRIGHT YEAR, COPYRIGHT OWNER]. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

-----

Portions relating to SharpDevelop ic#code 4.2.0.8783 are 2012 AlphaSierraPapa for the SharpDevelop team.This Autodesk software contains the above specified software which are licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license and the source code for each of the above software components (and modifications made by Autodesk, if any) are included on the media provided by Autodesk or with the download of this Autodesk software. You may modify, debug and relink the above specified software to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

-----

This Software includes itextsharp, which Autodesk has licensed under the Mozilla Public License Version 1.1. The source code for itextsharp and a copy of the Mozilla Public License Version 1.1 are available on the media provided by Autodesk or with the download image of this Software.

-----

Portions relating to NUnit.org Vorontsov, nunit.core.dll v.2.6.0.12051 are 2000-2002 Philip Craig. All Rights Reserved. Copyright 2002-2012 Charlie PooleCopyright 2002-2004 James W. Newkirk, Michael C. Two, Alexei A. VorontsovCopyright 2000-2002 Philip A. CraigThis software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment (see the following) in the product documentation is required.Portions Copyright 2002-2012 Charlie Poole or Copyright 2002-2004 James W. Newkirk, Michael C. Two, Alexei A. Vorontsov or Copyright 2000-2002 Philip A. Craig2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.3. This notice may not be removed or altered from any source distribution.

-----

Portions relating to AvalonDock.dll v.1.3.3585 are 2007-2010, Adolfo Marinucci All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* Neither the name of Adolfo Marinucci nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -----

Portions relating to Mono.Cecil.dll v.0.9.5.0 are 2008 - 2011 Jb Evain.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

The demo projects "Base", "Startup" and "RichTextEditor" are licensed underthese terms (MIT license):

Copyright (c) 2005, Daniel Grunwald. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* Neither the name of Daniel Grunwald nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to "ICSharpCode.Core" are 2000-2012 AlphaSierraPapa for the SharpDevelop team.Portions relating to "AddInManager" are 2000-2011 AlphaSierraPapa for the SharpDevelop team.This Autodesk software contains the above specified software which are licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license and the source code for each of the above software components (and modifications made by Autodesk, if any) are included on the media provided by Autodesk or with the download of this Autodesk software. This source code can be found in the SharpDevelop source located at \3rdParty\Source\SharpDevelop_4.2.0.8783. You may modify, debug and relink the above specified software to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

-----

C# Library for Amazon Simple DB , Apache log4net, Castle MicroKernel/Windsor Container , and C# Library and Code for Amazon S3 are licensed under the Apache License, Version 2.0 (the License); you may not use these files except in compliance with the License. You may obtain a copy of the License at:http://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

-----

Portions relating to Memcached are 2003, Danga Interactive, Inc. All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.Neither the name of the Danga Interactive nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

-----

Copyright 1996 2009 Acresso Software Inc. and/or InstallShield Co. Inc. All Rights Reserved.

This product contains proprietary and confidential technology, information and creative works owned by Acresso Software Inc. and/or InstallShield Co. Inc. and their respective licensors, if any. Any use, copying, publication, distribution, display, modification, or transmission of such technology in whole or in part in any form or by any means without the prior express written permission of Acresso Software Inc. and/or InstallShield Co. Inc. is strictly prohibited. Except where expressly provided by Acresso Software Inc. and/or InstallShield Co. Inc. in writing, possession of this technology shall not be construed to confer any license or rights under any Acresso Software Inc. and/or InstallShield Co. Inc. intellectual property rights, whether by estoppel, implication, or otherwise.

All copies of the technology and related information, if allowed by Acresso Software Inc. and/or InstallShield Co. Inc., must display this notice of copyright and ownership in full.

Trademarks

Acresso, AdminStudio, FLEXnet Connect, InstallShield, InstallShield Developer, InstallShield DevStudio, InstallShield Professional, OneClickInstall, and QuickPatch are registered trademarks or trademarks of Acresso Software Inc. and/or InstallShield Co. Inc. in the United States of America and/or other countries. All other brand and product names mentioned herein are the trademarks and registered trademarks of their respective owners.

Restricted Rights Legend

The software and documentation are commercial items, as that term is defined at 48 C.F.R. 2.101, consisting of commercial computer software and commercial computer software documentation, as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.2702, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.2702-1 through 227.7202-4, as applicable, the commercial computer software and commercial computer software documentation are being licensed to U.S. government end users (A) only as commercial items and (B) with only those rights as are granted to all other end users pursuant to the terms and conditions set forth in the Acresso Software standard commercial agreement for this software. Unpublished rights reserved under the copyright laws of the United States of America.

-----

Portions 1997- 2009 Acresso Software Inc. and/or InstallShield Co. Inc.

-----

Portions relating to libcurl v.7.19.7.1 are 1996 - 2009, Daniel Stenberg, . All rights reserved.

Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

Portions related to OpenSSL are Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected].

5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson ([email protected]).

Original SSLeay License Copyright (C) 1995-1998 Eric Young ([email protected])All rights reserved.

This package is an SSL implementation written by Eric Young ([email protected]).The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([email protected])" The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([email protected])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Apache Avro Copyright 2009-2012 The Apache Software FoundationLicensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

-----

Portions relating to ACIS 19892001 Spatial Corp.

Portions related to Intel Threading Building Blocks v.4.0 are Copyright (C) 2005-2012 Intel Corporation. All Rights Reserved.

Portions related to Intel Math Kernel Library v.10.0.3 (www.intel.com/software/products/mkl) are Copyright (C) 20002008, Intel Corporation. All rights reserved.

This Autodesk software contains the following software components licensed from Siemens Industry Software Limited:

D-CubedTM HLM 2012. Siemens Industry Software Limited. All Rights Reserved.D-CubedTM CDM 2012. Siemens Industry Software Limited. All Rights Reserved.

-----

Portions relating to FLEXnet Publisher v.11.11 are Copyright (c) 1987-2012 Flexera Software LLC. All Rights Reserved.

Portions relating to libCurl v.7.15.5 are Copyright (c) 1996 - 2012, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this software without prior written authorization of the copyright holder.

Portions relating to OpenSSL 0.9.8c are

Copyright (c) 1998-2006 The OpenSSL ProjectCopyright (c) 1995-1998 Eric A. Young, Tim J. HudsonAll rights reserved.

Portions relating to Info-Zip are Copyright (c) 1990-1999 Info-ZIP. All rights reserved.

For the purposes of this copyright and license, "Info-ZIP" is defined as the following set of individuals:

Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler, Antoine Verheijen, Paul von Behren, Rich Wales, Mike White

This software is provided "as is," without warranty of any kind, express or implied. In no event shall Info-ZIP or its contributors be held liable for any direct, indirect, incidental, special or consequential damages arising out of the use of or inability to use this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. Redistributions of source code must retain the above copyright notice, definition, disclaimer, and this list of conditions.

2. Redistributions in binary form must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution.

3. Altered versions--including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, and dynamic, shared, or static library versions--must be plainly marked as such and must not be misrepresented as being the original source. Such altered versions also must not be misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the altered versions with the names "Info-ZIP" (or any variation thereof, including, but not limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s).

4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.

Portions relating to Windows Template Library-WTL v.8.0 are Copyright (C) Microsoft Corporation. All rights reserved.

This file is a part of the Windows Template Library. The use and distribution terms for this software are covered by the Common Public License 1.0 (http://opensource.org/osi3.0/licenses/cpl1.0.php) which can be found in the file CPL.TXT at the root of this distribution. By using this software in any fashion, you are agreeing to be bound by the terms of this license. You must not remove this notice, or any other, from this software.

The source code for WTL v.8.0 (and modifications made by Autodesk, if any) is included on the DVD or with the download of this Autodesk software.

Portions related to KQOAuth v.0.97 are authored by Johan Paul ([email protected]) http://www.johanpaul.com. This Autodesk software contains KQOAuth v.0.97, as modified by Autodesk. KQOAuth v.0.97 is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the DVD or with the download of this Autodesk software. You may obtain a copy of the source code for KQOAuth v.0.97, as modified by Autodesk, from www.autodesk.com/lgplsource or by sending a written request to:Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903Your written request must:3.Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and4.Identify:a.This Autodesk software name and release number;b.That you are requesting the source code for KQOAuth v.0.97, as modified by Autodesk; andc.The above URL (www.autodesk.com/lgplsource)so that Autodesk may properly respond to your request. The offer to receive this KQOAuth v.0.97 source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.

You may modify, debug and relink KQOAuth v.0.97 to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

Portions relating to OpenSSL toolkit v.1.0.0e are Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

7.Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.8.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.9.All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"10.The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected] derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.12.Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)" THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to OpenSSL toolkit v.1.0.0e are Copyright (C) 1995-1998 Eric Young ([email protected]). All rights reserved.

This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

5.Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.6.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.7.All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([email protected])." The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).8.If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([email protected])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to QAxContainer are Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies). All rights reserved. Contact: Qt Software Information ([email protected]). This software contains QAxContainer.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.* Neither the name of Nokia Corporation and its Subsidiary(-ies) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions relating to Qt v.4.7.2 are Copyright (c) 2011 Nokia Corporation and/or its subsidiary(-ies). All rights reserved. Contact: Qt Software Information ([email protected]). This Autodesk software contains Qt v.4.7.2. Qt is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the DVD or with the download of this Autodesk software. You may obtain a copy of the source code for Qt v4.7.2 from www.autodesk.com/lgplsource or by sending a written request to:

Autodesk, Inc.Attention: General CounselLegal Department111 McInnis ParkwaySan Rafael, CA 94903

Your written request must:1. Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and2. Identify: a. This Autodesk software name and release number; b. That you are requesting the source code for Qt v4.7.2; and c. The above URL (www.autodesk.com/lgplsource)

so that Autodesk may properly respond to your request. The offer to receive this Qt source code via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.

You may modify, debug and relink Qt to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.

-----

Portions relating to Open Source Computer Vision Library are 2000, 2001, Intel Corporation, all rights reserved. Third party copyrights are property of their respective owners.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:Redistribution's of source code must retain the above copyright notice, this list of conditions and the following disclaimer.Redistribution's in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.The name of Intel Corporation may not be used to endorse or promote products derived from this software without specific prior written permission. This software is provided by the copyright holders and contributors "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the Intel Corporation or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.

-----

Portions relating to ER Mapper Image Compression SDK v.3.3 are (C) 1997 Earth Resource Mapping

-----

PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE and other Pantone, Inc. trademarks are the property of Pantone, Inc. 1998-2000 Pantone, Inc.

-----

The Sentry Spelling-Checker Engine Copyright 1994-2003 Wintertree Software Inc.English Dictionary Copyright 1999 Wintertree Software Inc.French Dictionary Copyright 1999 Wintertree Software Inc.Spanish Dictionary Copyright 1999 Wintertree Software Inc.Italian Dictionary Copyright 1999 Wintertree Software Inc.German Dictionary Copyright 1999 Wintertree Software Inc.

-----

Portions relating to Newtonsoft.Json.dll v.4.5.6.14930 are Copyright (c) Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

-----

-----------------------------

This software contains AutoCAD RealDWG 2014:

AutoCAD RealDWG 2014 2013 Autodesk, Inc. All rights reserved.

All use of this Software is subject to the terms and conditions of the Autodesk End User License Agreement accepted upon installation of this Software and/or packaged with the Software.

This Product or Service may incorporate or use background Autodesk technology components. For information about these components, click here: http://www.autodesk.com/cloud-platform-components.

Trademarks

The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 123D, 3ds Max, Algor, Alias, AliasStudio, ATC, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk 123D, Autodesk Homestyler, Autodesk Intent, Autodesk Inventor, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSketch, AutoSnap, AutoTrack, Backburner, Backdraft, Beast, Beast (design/logo), BIM 360, Built with ObjectARX (design/logo), Burn, Buzzsaw, CADmep, CAiCE, CAMduct, CFdesign, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Creative Bridge, Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, Design Server, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (design/logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DWGX, DXF, Ecotect, ESTmep, Evolver, Exposure, Extending the Design Team, FABmep, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop, ForceEffect, Freewheel, GDX Driver, Glue, Green Building Studio, Heads-up Design, Heidi, Homestyler, HumanIK, i-drop, ImageModeler, iMOUT, Incinerator, Inferno, Instructables, Instructables (stylized robot design/logo), Inventor, Inventor LT, Kynapse, Kynogon, LandXplorer, Lustre, Map It, Build It, Use It, MatchMover, Maya, Mechanical Desktop, MIMI, Moldflow, Moldflow Plastics Advisers, Moldflow Plastics Insight, Moondust, MotionBuilder, Movimento, MPA, MPA (design/logo), MPI (design/logo), MPX, MPX (design/logo), Mudbox, Multi-Master Editing, Navisworks, ObjectARX, ObjectDBX, Opticore, Pipeplus, Pixlr, Pixlr-o-matic, PolarSnap, Powered with Autodesk Technology, Productstream, ProMaterials, RasterDWG, RealDWG, Real-time Roto, Recognize, Render Queue, Retimer, Reveal, Revit, Revit LT, RiverCAD, Robot, Scaleform, Scaleform GFx, Showcase, Show Me, ShowMotion, SketchBook, Smoke, Softimage, Socialcam, Sparks, SteeringWheels, Stitcher, Stone, StormNET, TinkerBox, ToolClip, Topobase, Toxik, TrustedDWG, T-Splines, U-Vis, ViewCube, Visual, Visual LISP, Vtour, WaterNetworks, Wire, Wiretap, WiretapCentral, XSI

ACE, TAO, CIAO, and CoSMIC are copyrighted by Douglas C. Schmidt and his research group at Washington University, University of California, Irvine, and Vanderbilt University, Copyright (c) 1993-2009, all rights reserved.

ACIS Geometric Modeler is the registered trademark of SPATIAL TECHNOLOGY, INC.

Microsoft and Visual Basic are registered trademarks in the United States and other countries and the Microsoft Visual Basic Technology logo is a trademark of Microsoft Corporation.

ISYS and the ISYS logo are registered trademarks or trademarks of ISYS Search Software Inc.

ArchVision, realpeople, and RPC are either registered trademarks or trademarks of ArchVision, Inc.

PANTONE MATCHING SYSTEM and PANTONE PLUS SERIES registered trademarks of Pantone LLC.

Microsoft, Direct3D, DirectX, Excel, Windows, are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries.

RSA is either a registered trademark or trademark of RSA Security, Inc., in the United States and/or other countries.Wise Solutions is either a registered trademark or trademark of Wise Solutions, Inc., in the United States and/or other countries.Adobe, Acrobat, Acrobat Reader, Adobe PDF (logo), Flash, OpenType (logo), Reader, and Streamline are either registered trademarks or trademarks of Adobe Systems, Inc., in the United States and/or other countries.

dataBased Intelligence and dBASE are either registered trademarks or trademarks of dataBased Intelligence, Inc., in the United States and/or other countries.

Microsoft, ActiveX, Direct3D, DirectX, Excel, Microsoft Internet Explorer (logo), OpenType, Tahoma, Windows, Windows (logo), Windows NT, and Windows Start (logo) are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries.

SGI, OpenGL, and OpenGL (logo) are either registered trademarks or trademarks of Silicon Graphics, Inc., in the United States and/or other countries.

SMLib is either a registered trademark or trademark of Solid Modeling Solutions, Inc., in the United States and/or other countries.

Spatial, ACIS, and SAT are either registered trademarks or trademarks of Spatial Corp. in the United States and/or other countries.

Acresso, AdminStudio, FLEXnet Connect, InstallShield, InstallShield Developer, InstallShield DevStudio, InstallShield Professional, OneClickInstall, and QuickPatch are registered trademarks or trademarks of Acresso Software Inc. and/or InstallShield Co. Inc. in the United States of America and/or other countries.

mental images and mental ray are registered trademarks of NVIDIA ARC GmbH, licensed for use by Autodesk, Inc.

Intel, Xeon and Pentium are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

GRANITE is either a registered trademark or trademark of Parametric Technology Corporation, in the United States and/or other countries.

HP Instant Printing is a registered Trademark of Hewlett-Packard Company.

D-Cubed is a trademark of Siemens Industry Software Limited.

Visual LISP, Volo, Vtour, Wire, Wiretap, WiretapCentral, XSI, and XSI (design/logo).

All other brand names, product names or trademarks belong to their respective holders.

Third-Party Software Credits and Attributions

This software is based in part on the works of the following:

Portions related to ezXML are Copyright 2004, 2005 Aaron Voisine, under the following license:

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT, SHALL THE AUTHORIS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

ACIS 19892002 Spatial Corp.

Portions 1997- 2009 Acresso Software Inc. and/or InstallShield Co. Inc.

Portions Copyright (c) 1997-2000 Barry Allyn. All rights reserved.

Adobe Flash Player, Copyright 1996-2006 Adobe Systems Incorporated. All Rights Reserved, Protected by U.S. Patent 6,879,327; Patents Pending in the United States and other countries. Adobe and Flash are either trademarks or registered trademarks in the United States and/or other countries.

Adobe Shockwave Player. Copyright 1996-2006 Adobe Systems Incorporated. All Rights Reserved. Adobe and Shockwave are either trademarks or registered trademarks in the United States and/or other countries.

Portions relating to Adobe Photoshop CS4 software Copyright 1990-1991 by Thomas Knoll. Copyright 1992-1995 by Adobe Systems, Inc.

Portions related to Apache Xerces DLL are Copyright 1999-2000 The Apache Software Foundation. All rights reserved. This product includes software developed by the Apache Software Foundation (http://www.apache.org) subject to its license terms and conditions (http://xml.apache.org/dist/LICENSE.txt).

Typefaces from the Bitstream typeface library Copyright 1992.

Portions related to HLM are D-Cubed HLM 2010. Siements Product Lifecycle Management Software (GB) Limited. All Rights Reserved.

Portions related to are D-Cubed 2D DCM Copyright 2010. Siemens Product Lifecycle Management Software (GB) Limited. All Rights Reserved.

AutoCAD and AutoCAD LT products are produced under a license of data derived from DIC Color Guide from Dainippon Ink and Chemicals, Inc. Copyright Dainippon Ink and Chemicals, Inc. All rights reserved. DIC and DIC Color Guide are registered trademarks of Dainippon Ink and Chemicals, Inc.

Portions relating to JPEG software is copyright 1991-1998, Thomas G. Lane. All Rights Reserved. Portions of this software are based on the work of the Independent JPEG Group.

Active Delivery 2.0 1999-2004 Inner Media, Inc. All rights reserved.

libpng version 1.2.8 - December 3, 2004, Copyright (c) 1998-2004 Glenn Randers-Pehrson, Copyright (c) 1996-1997 Andreas Dilger, Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc.

LibTiff (http://www.libtiff.org), Copyright (c) 1988-1997 Sam Leffler, Copyright (c) 1991-1997 Silicon