COUPLINGS, FITTINGS, VALVES AND ACCESSORIES … · FIRE PROTECTION PRICE LIST PL2018-FP 11546 REV B 02/2018 ... Style 920/920N Mechanical-T Outlet Vic-Tap II Style 920/920N Mechanical-T

victauliclocations.com

FIRE PROTECTION PRICE LIST

PL2018-FP 11546 REV B 02/2018Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries. All other trademarks listed herein are the property of their respective holders, in the U.S. and/or other countries. The terms “Patented” or “Patent Pending” refer to design or utility patents or patent applications for articles and/or methods of use in the United States and/or other countries.

© 2018 VICTAULIC COMPANY. ALL RIGHTS RESERVED.

U.S./World Headquarters4901 Kesslersville Road Easton, PA 18040 USA

EMEAIPrijkelstraat 36 9810 Nazareth, Belgium

Asia PacificUnit 808, Building B Hongwell International Plaza No.1602 West Zhongshan Road Shanghai, China 200235

Effective February 5, 2018FIRE PROTECTION PRICE LIST

FIRE PROTECTION PRICE LISTPL2018-FP Effective February 5, 2018

COUPLINGS, FITTINGS, VALVES AND ACCESSORIESCOUPLINGS, FITTINGS, VALVES AND ACCESSORIES

https://twitter.com/Victaulic

https://www.facebook.com/VictaulicCompany

http://www.youtube.com/user/VictaulicCompany

http://www.linkedin.com/company/victaulic

http://i.youku.com/i/UMzUzODA2ODM2

SECTION 1 – FireLock™ and Fire Protection ProductsStyle 009N FireLock EZ™ Rigid Coupling

Style 005 FireLock™ Rigid Coupling

FireLock™ Installation-Ready™ Fittings FireLock™ and Standard Fittings Style 744 FireLock™ Flange Adapter

No. 67 End of Run Fitting

No. 10-DR Drain Elbow

Series 728 FireLock™ Grooved End Ball Valve

Series 705 FireLock™ Butterfly Valve – Supervised OPEN

Series 707C FireLock™ Butterfly Valve – Supervised CLOSED

Series 765 FireLock™ High Pressure Butterfly Valve – Supervised OPEN

Series 766 FireLock™ High Pressure Butterfly Valve – Supervised CLOSED

Series 771 OS&Y and Series 772 NRS Gate Valves

Series 773 and Series 774 Post Indicators

Supervisory Switches Series 717H and 717 FireLock™ Check Valves

Series 722 FireLock™ Threaded Ball Valve

Series 732H FireLock™ Wye-Type Vic-Strainer

Style 720 Alarm Test Module

Series 747M FireLock™ Commercial Zone Control Riser Module

Series 247 FireLock™ Residential Zone Control Riser Module

Style 735 FireLock™ Fire Pump Test Meter

FireLock™ Innovative Groove System (IGS)SECTION 2 – Victaulic® Hydraulic Control Valves

Series 867-42T Pressure Reducing ValveSeries 867-7UL Pressure Reducing Valve

Series 867-43T Pressure Relief ValveSeries 867-4UF Pressure Relief Valve

Series 867-7UF Pressure Relief Valve

Series 867-400 Pressure Reducing Valve

Series 867-459 Pressure Relief Valve


BERMAD FP-436 Differential Pressure Sustaining Valve

Series 867-460 Differential Pressure Sustaining BERMAD Valve

Series 866-465 Level Control BERMAD Valve




Victaulic® Hydraulic Control Valve Accessories

SECTION 3 – Hole Cut ProductsStyle 920/920N Mechanical-T Outlet

Vic-Tap II Style 920/920N Mechanical-T Cross

Style 922 Outlet Tee

Style 923 Strapless Outlet

SECTION 4 – Couplings, Spare Parts and FittingsStyle 07 Zero-Flex™ Rigid Coupling

Style 177N QuickVic™ Flexible Coupling for Steel

Style 77 Standard Coupling

Style 75 Flexible Coupling

Style 750 Reducing Coupling

Spare Parts IPS Size Grooved End Fittings

SECTION 5 – VicFlex™ Stainless Steel Sprinkler FittingsSeries AH1 Hose Series AH!-CCSeries AH2 Hose Series AH2-300 Hose Series AH2-CCSeries AH5 Hose VicFlex™ Brackets VicFlex™ Reducers and End Fittings VicFlex™ Preassembled System Order Form V36 Dry Sprinkler with Integral Style AB6 Assembly Order Form

V36 Dry Sprinkler with Style AB6 Accessories Series AQC For Clean Room Applications

Series AQD For Duct Systems

Model VS1 VicFlex™ Dry Sprinkler

SECTION 6 – Vic-Press™ System for Schedule 10S Stainless Steel Pipe

Vic-Press™ – Press System for Schedule 10S, Type 304 Stainless Steel Piping

Vic-Press™ – Press System for Schedule 10S, Type 316 Stainless Steel Piping

I

IndexIN

dE

x

VICTAULIC.COM PL2018-FP

http://www.victaulic.com/

SECTION 7 – Pipe Preparation ToolsVE12 Groove-In-Place

VE26 S/C Groove-In-Place

VE26/VE46 Power Drive Kit

VE46 Groove-In-Place

VE226 B/S/M/C Portable Grooving Tool

VE226 Power Drive Kit

RG2100 Roll Grooving ToolVE106 Groove-N-Go

VE206 Portable Roll Grooving ToolVE272SFS Field Roll Grooving Tool

VE268 Shop Fabrication Grooving Tool

VAPS 112 Pipe Stand

VHCT 900 Hole Cutting Tool

HCT908 Hole Cutting Tool

PFT510 Vic-Press™ Tool for Schedule 10S Stainless Steel Pipe

NOTE: Categories can have a single discount applied. Any individual discounts listed will take precedence over category discounts.

Submitted By: __________________________________ Date: __________________________________

Approved By: ___________________________________ Date: __________________________________

VICTAULIC.COM PL2018-FPII

IndexIN

dE

x


Table of contents

Gasket Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VSECTION 1 – FireLock™ and Fire Protection ProductsStyle 009N FireLock EZ™ Rigid Coupling . . . . . . . . . . . . . . . 1-2Style 005 FireLock™ Rigid Coupling . . . . . . . . . . . . . . . . . . . 1-2FireLock™ Installation-Ready™ Fittings

No. 101 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4No. 103 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4No. 102 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5No. 143 Close Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

FireLock™ and Grooved IPS Pipe FittingsNo. 001 – 90° FireLock™ Elbow . . . . . . . . . . . . . . . . . . . 1-6No. 003 – 45° FireLock™ Elbow . . . . . . . . . . . . . . . . . . . 1-6No. 10 - 90° IPS Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6No. 11 - 45° IPS Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6No. 002 – FireLock™ Tee . . . . . . . . . . . . . . . . . . . . . . . . .1-7No. 006 – FireLock™ Cap . . . . . . . . . . . . . . . . . . . . . . . . .1-7No. 20 IPS Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7No. 60 IPS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7

Style 744 FireLock™ Flange Adapter . . . . . . . . . . . . . . . . . . . 1-8Flange Adapter Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8No. 67 End of Run Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9No. 10-DR Drain Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9Series 728 FireLock™ Ball Valve . . . . . . . . . . . . . . . . . . . . . .1-10Series 705 Butterfly Valve – Supervised OPEN . . . . . . . . . . .1-11Series 705 Weatherproof Actuator Replacement Kit . . . . . . . .1-11Series 707C Butterfly Valve – Supervised CLOSED . . . . . . . .1-12Series 765 High Pressure Butterfly Valve –

Supervised OPEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12Series 766 High Pressure Butterfly Valve –

Supervised CLOSED . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-13Series 771 OS&Y and Series 772 NRS Gate Valves . . . . . . . .1-14Flange Mounting Kits – Series 772H NRS . . . . . . . . . . . . . . .1-14Series 773 and Series 774 Post Indicators . . . . . . . . . . . . . .1-15Supervisory Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-15Series 717H FireLock™ Check Valve . . . . . . . . . . . . . . . . . . .1-15Series 717 FireLock™ Check Valve . . . . . . . . . . . . . . . . . . . .1-16Series 722 Threaded Ball Valve . . . . . . . . . . . . . . . . . . . . . . .1-16Series 732H FireLock™ Wye-Type Vic-Strainer . . . . . . . . . . .1-17Series 720 Alarm Test Module . . . . . . . . . . . . . . . . . . . . . . .1-17Series 720 Alarm Test Module with Gauge Port Tap . . . . . . .1-18Series 720 Alarm Test Module with Pressure Relief Option . .1-18Series 720 Alarm Test Module

With Pressure Relief and Gauge Port Options . . . . . . . . .1-18Pressure Relief Valve Kit for Series 720 . . . . . . . . . . . . . . . . .1-19Series 747M Commercial Zone Control Riser Module . . . . . . .1-19Series 247 Residential Zone Control Riser Module . . . . . . . . .1-19Pressure Relief Valve Kit for Series 747M and 247 . . . . . . . . 1-20Series 735 Fire Pump Test Meter . . . . . . . . . . . . . . . . . . . . .1-21FireLock™ Innovative Groove System (IGS)

No. 142 Welded Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . 1-22Style 922 Outlet-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22No. 101 Installation-Ready™ 90° Elbow . . . . . . . . . . . . . 1-23

Style 108 Installation-Ready™ Rigid Coupling . . . . . . . . 1-23No. 102 Installation-Ready™ Tee . . . . . . . . . . . . . . . . . . .1-24No. 148 Sprinkler Reducer . . . . . . . . . . . . . . . . . . . . . . .1-24No. 143 Close Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25No. 145 Female Threaded x Groove 90° Elbow . . . . . . . .1-25No. 146 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25No. 140 Male Threaded x Groove Adapter . . . . . . . . . . . 1-26No. 141 Female Threaded x Groove Adapter . . . . . . . . . 1-26Series 147 End Cap Assembly . . . . . . . . . . . . . . . . . . . . 1-26

SECTION 2 – Victaulic® Hydraulic Control ValvesVictaulic® Hydraulic Control Valves Order Form . . . . . . . . . . . 2-2Series 867-42T Pressure Reducing Valve . . . . . . . . . . . . . . . 2-3Series 867-7UL Pressure Reducing Valve . . . . . . . . . . . . . . . 2-3Series 867-43T Pressure Relief Valve . . . . . . . . . . . . . . . . . . 2-4Series 867-4UF Pressure Relief Valve . . . . . . . . . . . . . . . . . . 2-4Series 867-7UF Pressure Relief Valve . . . . . . . . . . . . . . . . . . 2-5Series 867-400 Pressure Reducing Valve . . . . . . . . . . . . . . . 2-5Series 867-459 Pressure Relief Valve

with Electric Override . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5Series 867-759 Pressure Relief Valve . . . . . . . . . . . . . . . . . . 2-6BERMAD FP-436 Differential Pressure Sustaining Valve . . . . 2-6Series 866-460 Level Control BERMAD Valve

with Modulating Horizontal Float . . . . . . . . . . . . . . . . . . .2-7Series 866-465 Level Control BERMAD Valve

with Bi-Level Electric Float . . . . . . . . . . . . . . . . . . . . . . . .2-7Series 866-466 Level Control BERMAD Valve

with Vertical Float . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8Series 866-480 Level Control BERMAD Valve

with Altitude Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8Series 866-482 Level Control BERMAD Valve

with Altitude Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8Victaulic® Hydraulic Control Valve Accessories . . . . . . . . . . . 2-9SECTION 3 – Hole Cut ProductsStyles 920/920N Mechanical-T Outlet . . . . . . . . . . . . . . . . . . 3-2Vic-Tap II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4Styles 920/920N Mechanical-T Cross . . . . . . . . . . . . . . . . . . 3-5Style 922 Outlet Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8Style 923 Strapless Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8SECTION 4 – Couplings, Spare Parts and FittingsStyle 07 Zero-Flex™ Rigid Coupling . . . . . . . . . . . . . . . . . . . 4-2Style 177N QuickVic Flexible Coupling for Steel . . . . . . . . . . . 4-2Style 77 Standard Flexible Coupling . . . . . . . . . . . . . . . . . . . 4-3Style 75 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Style 750 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . 4-4Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Metal Liners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . 4-7Go-No-Go Pipe Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7Elbows –

No. 12 - 22Z\x° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8No. 13 - 11Z\v° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8No. 100 and No. 110 1Z\x D Long Radius Elbows . . . . . . . 4-8

III

Table of ContentsTA

BLE

OF C

ON

TENTS



No. 29M Tee with Threaded Branch . . . . . . . . . . . . . . . . . . . 4-9No. 35 Cross, No. 33 True Y . . . . . . . . . . . . . . . . . . . . . . . . . 4-9No(s). 40, 42, and 43 Adapter Nipples . . . . . . . . . . . . . . . . .4-10No. 80 Female Threaded Adapter . . . . . . . . . . . . . . . . . . . . .4-10No(s). 18 and 19 Adapter Elbows . . . . . . . . . . . . . . . . . . . . .4-11No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . 4-12No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . .4-14No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . .4-15No. 50 Concentrc Reducer . . . . . . . . . . . . . . . . . . . . . . . . . .4-16 No. 51 Eccentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . .4-16No. 52 Reducer – Male Threaded Small End . . . . . . . . . . . . 4-18SECTION 5 – VicFlex™ Sprinkler Fitting SystemsSeries AH1 VicFlex™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Series AH1-CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Series AH2 VicFlex™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Series AH2-300 VicFlex™ Hose . . . . . . . . . . . . . . . . . . . . . . 5-3Series AH2-CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Series AH5 VicFlex™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4VicFlex™ Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4VicFlex™ Reducers and End Fittings . . . . . . . . . . . . . . . . . . . 5-5VicFlex™ Preassembled System Order Form . . . . . . . . . . . . . 5-5V36 Dry Sprinkler with Integral Style AB6

Assembly Order Form . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7V36 Dry Sprinkler with Style AB6 Accessories . . . . . . . . . . . . 5-8Series AQC-U for Clean Room Applications . . . . . . . . . . . . . . 5-8Series AQD For Duct Systems . . . . . . . . . . . . . . . . . . . . . . . . 5-8VicFlex™ Dry Sprinkler Model VS1 . . . . . . . . . . . . . . . . . . . . 5-9Model VS1 Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9VicFlex™ Dry Sprinkler Brackets . . . . . . . . . . . . . . . . . . . . . .5-10SECTION 6 – Vic-Press™ System

for Schedule 10S Stainless Steel PipeVic-Press 304

Seal Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2Style P500 Loose Seals . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Style P597 Standard Coupling . . . . . . . . . . . . . . . . . . . . . 6-3Style P596 Male Adapter – Threaded . . . . . . . . . . . . . . . . 6-3Series P569 Type 316 Stainless Steel Ball Valve . . . . . . . . 6-4Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . 6-4Style P586 90° Elbow – Short Tangent . . . . . . . . . . . . . . 6-4Style P542 90° Street Elbow . . . . . . . . . . . . . . . . . . . . . . 6-5Style P591 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Style P543 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . 6-5Style P592 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6Style P593 Tee – Reducing Branch . . . . . . . . . . . . . . . . . 6-6Style P588 Tee – Reducing Branch – Threaded . . . . . . . . 6-6Style P594 Concentric Reducer . . . . . . . . . . . . . . . . . . . . 6-7Style P595 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . 6-7Style P565 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . 6-7Style P587 Transition Nipple . . . . . . . . . . . . . . . . . . . . . . 6-8Style P584 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . 6-8Style P599 Female Adapter – Threaded . . . . . . . . . . . . . . 6-8Style P561 Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Style P540 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9PFT510 Vic-Press Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Vic-Press 316Seal Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10Style P500 Loose Seals . . . . . . . . . . . . . . . . . . . . . . . . . .6-11Style P507 Standard Coupling . . . . . . . . . . . . . . . . . . . . .6-11Style P576 Male Adapter – Threaded . . . . . . . . . . . . . . . .6-11Style P508 Slip Coupling . . . . . . . . . . . . . . . . . . . . . . . . 6-12Series P569 Stainless Steel Ball Valve . . . . . . . . . . . . . . 6-12Series P569 Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . 6-13Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . 6-13Style P568 90° Elbow – Short Tangent . . . . . . . . . . . . . 6-13Style P562 90° Street Elbow . . . . . . . . . . . . . . . . . . . . . 6-13Style P571 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . .6-14Style P563 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . .6-14Style P572 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-14Style P573 Tee – Reducing Branch . . . . . . . . . . . . . . . . 6-15Style P578 Tee – Reducing Branch Threaded . . . . . . . . 6-15Style P574 Concentric Reducer . . . . . . . . . . . . . . . . . . . 6-15Style P575 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . .6-16Style P566 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . .6-16Style P577 Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . .6-16Style P585 Threaded Union . . . . . . . . . . . . . . . . . . . . . . .6-16Style P579 Female Adapter – Threaded . . . . . . . . . . . . . .6-17Style P560 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-17PFT510 Vic-Press Tool . . . . . . . . . . . . . . . . . . . . . . . . . . .6-17

Section 7 – Pipe Preparation ToolsVic-Easy Roll Grooving Tools – Field Portable

VE12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2VE26 S/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2VE26/VE46 Power Drive Kit . . . . . . . . . . . . . . . . . . . . . . . .7-2VE46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2VE226 B/S/M/C/BSS/MSS/P . . . . . . . . . . . . . . . . . . . . . . 7-3VE226 Power Drive Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3RG2100 Roll Grooving Tool . . . . . . . . . . . . . . . . . . . . . . . 7-3

Vic-Easy Roll Grooving Tools – Field FabricationVE106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4VE206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5VE272SFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

Vic-Easy Roll Grooving Tools – Shop FabricationVE268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-7VAPS112 Pipe Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8

Hole Cutting ToolsVHCT900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9HCT908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9

Vic-Press™ ToolPFT510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10

How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-11Terms and Conditions of Tool Rental . . . . . . . . . . . . . . . . . . .7-12Terms and Conditions of Tool Sale . . . . . . . . . . . . . . . . . . . . .7-13Terms and Conditions of Sale . . . . . . . . . . . . . Inside Back CoverWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover

VICTAULIC.COM PL2018-FPIV

Table of ContentsTA

BLE

OF

CO

NTE

NTS


Gasket Selection Guide

Gasket Selection GuideRefer to publication 05.01 for more information.

IMPORTANT PLEASE REAd BEFORE ORdERING. Gasket selection must always be specified on your order.

Standard Gaskets

IPS

GRAdETEMP.

RANGE* COMPOUNdCOLOR COdE GENERAL SERVICE GUIdELINES

E –30°F to +230°F EPDM GreenStripe

May be specified for hot water service within the speci-fied temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES OR STEAM SERVICES.

E(Type A)§

Ambient EPDM VioletStripe

Applicable for wet and dry (oil-free air) sprinkler services only. For dry services, Flush-Seal™ gaskets may be speci-fied. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES OR STEAM SERVICES.

* For specific chemical and temperature compatibility, refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.

§ Vic-Plus pre-lubricated gasket. The Grade E Type A gasket is only available for Victaulic FireLock™ products.

Special Gaskets

IPS

GRAdETEMP.


L –30°F to +350°F Silicone RedGasket

May be specified for dry heat, air without hydrocarbons to +350°F | +177°C and certain chemical services.

* For specific chemical and temperature compatibility, refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.

V

GasketsG

ASk

ET SELEC

TION

GU

IdE



VICTAULIC.COM PL2018-FPVI


SECTION 1 – FireLock™ and Fire Protection Products

FireLock™ and Fire Protection Products

1-1VICTAULIC.COM PL2018-FP


Style 009N FireLock EZ™ Rigid Coupling

FireLock EZ™ Rigid Coupling

STYLE 009NRefer to publication 10.64

Refer to Victaulic publication

10.01 for details.

STYLE 009N – GRAdE “E” (TYPE A) GASkET

PIPE inches

Approx. Wgt. Ea.

COUPLING COMPLETE † with Grade “E” (Type A)

Gasket

COUPLING COMPLETE † with Grade

“E” (Type A) Gasket and Stainless

Steel Bolts & Nuts

SPARE PARTS

Nom. Size Outside dia. lb

Price Each Price Each Grade “E” (Type A) GasketPainted Galv. Galv.

1Z\v 1.660 1.4 $59.50 $71.00 $142.50 $56.001Z\x 1.900 1.5 60.50 72.00 145.00 60.00

2 2.375 1.9 68.50 79.50 159.50 63.002Z\x 2.875 2.1 78.50 93.00 188.00 69.50

3 3.500 2.3 88.50 110.00 221.50 79.004 4.500 2.9 124.00 149.00 301.00 104.005 5.563 5.0 164.50 206.50 417.00 105.006 6.625 5.9 196.00 238.00 481.00 111.008 8.625 11.4 327.50 397.50 802.00 159.50

10 10.750 22.6 2088.50 3009.00 6079.00 1026.5012 12.750 27.6 2602.00 3628.00 7329.00 1026.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.

Style 005 FireLock™ Rigid Coupling

FireLock™ Rigid Coupling

STYLE 005Refer to publication 10.02


10.01 for details.

STYLE 005 – GRAdE “E” (TYPE A) GASkET

PIPE inches

COUPLING COMPLETE † With Grade “E” (Type A) Gasket SPARE PARTS

Nom. Size

Outside dia.

Approx. Wgt. Each

lb

Price Each Grade E (Type A) Gasket Only

Price Ea.

Bolt & Nut *

Painted Galv. No. Size inches

Price Each Pltd.

1Z\v 1.660 1.2 $66.50 $80.00 $59.00 2 C\, x 2Z\v $17.501Z\x 1.900 1.2 69.00 81.50 62.50 2 C\, x 2Z\v 17.50

2 2.375 1.6 75.50 90.00 67.00 2 C\, x 2Z\x 18.502Z\x 2.875 1.9 88.00 104.00 73.00 2 C\, x 2Z\x 18.50

3 3.500 2.1 99.50 122.00 83.00 2 C\, x 2Z\x 18.504 4.500 3.1 139.50 167.00 111.00 2 C\, x 2Z\x 18.505 5.563 4.5 169.00 213.00 109.50 2 Z\x x 3 24.006 6.625 5.0 202.50 246.00 119.50 2 Z\x x 3 24.008 8.625 11.3 339.00 410.50 171.00 2 B\, x 4Z\v 27.00


* Number of bolts equals number of segments supplied.

Note: Style 005 FireLock bolts and nuts are sized for use with Style 005 couplings only and must not be used with other Victaulic products.


Grade E (Type A) EPDM gaskets are applicable for wet and dry fire sprinkler systems (ambient temperature) only.

VICTAULIC.COM PL2018-FP1-2

FireLock™ System for Grooved IPS Pipe SE

CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE

http://www.victaulic.com/assets/uploads/literature/10.64.pdf







FireLock™ Rigid Coupling



10.01 for details.

STYLE 005 – GRAdE “E” (TYPE A) FLUSH-SEAL™ GASkET

PIPE inches

COUPLING COMPLETE † With Grade “E” (Type A) Flush-Seal Gasket SPARE PARTS

Nom. Size

Approx. Wgt. Each

lb

Price Each Grade “E” (Type A) Flush-Seal Gasket

Only Price EachPainted Galvanized

1Z\v 1.2 $89.00 $98.00 $80.001Z\x 1.2 92.00 107.50 88.00

2 1.6 99.00 116.50 95.002Z\x 1.9 118.50 136.50 99.00

3 2.1 126.50 147.50 117.004 3.1 176.50 206.00 155.005 4.5 291.00 334.00 216.006 5.0 320.50 374.00 276.008 11.3 517.00 599.50 302.50


Standard gasket and Flush-Seal™ gasket approved for dry pipe systems to –40°F/–40°C. Based on “typical” pipe surface condi-tions, supplemental lubricant is recommended for services installed below 0°F/–18°C and for all dry pipe systems or systems to be subjected to air tests prior to being filled with water. Supplemental lubrication may also be required on pipe with raised or undercut weld seams or pipe that has voids and/or cracks at the weld seams. Victaulic continues to recommend the use of Flush-Seal™ gaskets for dry services.


1-3

FireLock™ System for Grooved IPS Pipe


SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE





FireLock™ Installation-Ready™ FittingsNo. 101 90° Elbow

FireLock™ Installation-Ready™ Fittings

90° Elbow

NO. 101Refer to publication 10.06

NO. 101 90° ELBOW – GRAdE “E” (TYPE A) GASkET

PIPE inches

Approx. Wgt. Ea.

COUPLING COMPLETE † with Grade “E” (Type A) Gasket SPARE PARTS

Nom. Size Outside dia. lbPrice Each Grade “E”

(Type A) GasketPainted Galv.1Z\v 1.660 3.2 $142.50 $178.00 $102.50

1Z\x 1.900 3.7 146.50 183.00 109.002 2.375 5.4 147.50 184.50 116.00

2Z\x 2.875 6.4 178.00 222.50 127.00

† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.


No. 103 45° Elbow

45° Elbow


NO. 103 45° ELBOW – GRAdE “E” (TYPE A) GASkET

PIPE inches

Approx. Wgt. Ea.




1Z\x 1.900 3.1 146.50 183.00 109.002 2.375 4.4 147.50 184.50 116.00

2Z\x 2.875 4.9 178.00 222.50 127.00




FireLock™ System for Grooved IPS PipeSE

CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE




No. 102 Tee

Tee


NO. 102 TEE – GRAdE “E” (TYPE A) GASkET

PIPE inches

Approx. Wgt. Ea.




1Z\x 1.9 4.6 227.00 284.00 163.502 2.375 6.4 230.00 287.50 173.50

2Z\x 2.875 7.5 265.50 332.00 190.00



No. 143 Close Nipple

Close Nipple


NO. 143 CLOSE NIPPLE

Size End to EndApprox. Wgt. Ea.

Price EachNominal

Actual Outside diamer

inches lbinches1Z\v 1.660 2.375 0.4 $35.001Z\x 1.900 2.375 0.5 38.50

2 2.375 2.375 0.7 46.002Z\x 2.875 2.375 1.1 54.50

1-5



SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE




FireLock™ and Grooved IPS Pipe Fittings –No. 001 – 90° FireLock™ Elbow, No. 003 – 45° FireLock™ Elbow

FireLock™ Fittings


90° ELBOW NO. 001 45° ELBOW NO. 003Refer to publication 10.03

No. 001

No. 003


10.01 for details.

FIRELOCk™ FITTINGS – 90° ELBOW OR 45° ELBOW

Nom. Size 90° Elbow No. 001 45° Elbow No. 003

inches

Approx. Wgt. Each

lb

Price Each Approx. Wgt. Each

lb

Price Each

Painted Galv. Painted Galv.2 1.7 $52.00 $66.50 1.8 $52.00 $66.50

2Z\x 3.1 69.50 93.00 2.2 69.50 86.503 4.0 90.50 120.00 3.1 90.50 113.504 6.7 129.50 178.00 5.6 129.50 171.505 12.6 302.50 398.50 8.3 302.50 371.506 18.3 355.50 488.00 11.7 355.50 448.008 25.5 693.00 986.00 20.4 693.00 953.00

NOTE: FireLock™ Fittings are designed for use with FireLock™ and FireLock EZ™ couplings. Use of other products may result in bolt pad interference.

No. 10 - 90° IPS Elbow, No. 11 - 45° IPS Elbow

Fittings

90° ELBOW NO. 10 45° ELBOW NO. 11Refer to publication 07.01

No. 10

No. 11


10.01 for details.

FITTINGS – 90° ELBOW OR 45° ELBOW

Nom. Size 90° Elbow No. 10 45° Elbow No. 11

inches

Approx. Wgt. Ea.

lbC - E inches

Price Each Approx. Wgt. Ea.

lbC - E inches

Price Each

Painted Galv. Painted Galv.C\v 0.5 2.25 $195.00 $205.50 0.5 1.50 $195.00 $205.501 0.6 2.25 104.50 138.00 0.6 1.75 104.50 131.50

1Z\v 1.0 2.75 104.50 138.00 0.9 1.75 104.50 131.50

1Z\x 1.2 2.75 104.50 138.00 0.9 1.75 104.50 131.5010 63.3 9.00 2140.50 2676.00 37.5 4.75 1388.50 1736.0012 74.0 10.00 2354.00 2943.50 66.7 5.25 1666.50 2084.00


(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.



CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE








No. 002 – FireLock™ Tee, No. 006 – FireLock™ Cap


TEE NO. 002 CAP NO. 006Refer to publication 10.03

No. 002

No. 006


10.01 for details.

FIRELOCk™ FITTINGS – TEE OR CAP

Nom. Size Tee No. 002 Cap No. 006

inches

Approx. Wgt. Each

lb

Price Each Approx. Wgt. Each

lb

Price Each

Painted Galv. Painted Galv.1Z\v – – – 0.3 $28.50 $44.00

1Z\x – – – 0.4 30.00 44.002 2.4 $79.00 $98.50 0.6 35.50 48.00

2Z\x 3.6 103.00 131.50 1.0 41.00 52.003 5.3 143.00 183.50 1.2 49.00 62.504 8.7 216.00 280.50 2.4 71.50 98.005 15.7 497.00 622.00 4.1 143.00 195.006 22.7 572.00 746.50 5.9 159.00 219.508 38.7 1215.50 1605.50 12.7 302.00 412.00

NOTE: FireLock™ Fittings are designed for use with FireLock™ and FireLock EZ™ couplings. Use of other products may result in bolt pad interference.

No. 20 IPS Tee

Fittings

TEE NO. 20Refer to publication 07.01

No. 20


10.01 for details.

FITTINGS – STANdARd TEE

Nom. SizeApprox. Wgt. Ea.

Tee No. 20

inches lbPrice Each

Painted Galv.C\v 0.6 $209.00 $226.001 1.0 161.50 210.00

1Z\v 1.5 161.50 210.00

1Z\x 2.0 161.50 210.0010 73.0 2560.50 3200.0012 99.0 3328.50 4160.50


No. 60 IPS Cap

Fittings

CAP NO. 60Refer to publication 07.01

No. 60


10.01 for details.

FITTINGS – CAP

Nom. Size Cap No. 60

inches

Approx. Wgt. Ea.

lb

Price Each

Painted Galv.C\v 0.2 $210.50 $229.001 0.3 89.00 105.50

1Z\v 0.3 89.00 105.50

1Z\x 0.5 89.00 105.5010 21.0 733.00 916.5012 35.6 1282.00 1603.00


Caps are malleable/ductile iron.

1-7



SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE











Style 744 FireLock™ Flange Adapter

FireLock™ Flange Adapter

STYLE 744 – 175 PSI WITH GRAdE “E” (TYPE A) GASkETRefer to publication 10.04


10.01 for details.

STYLE 744 – GRAdE “E” (TYPE A) GASkET

PIPE inches VIC-FLANGE COMPLETE † SPARE PARTS

Nominal Size

Outside diameter

Approx. Wgt. Each

lb

Price Each Grade “E” (Type A) Gasket Price Ea.Painted Galv.

Style 744 - Hinged2 2.375 2.7 $254.00 $294.50 $48.00

2Z\x 2.875 4.2 296.00 351.00 56.503 3.500 4.8 333.00 399.00 59.504 4.500 6.5 433.00 527.00 78.005 5.563 8.3 519.00 632.50 92.006 6.625 9.0 566.50 688.00 107.508 8.626 13.9 710.50 888.00 142.50


The Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL flanges.

For Flange Washers see Spare Parts.


Flange Adapter Notes

Victaulic Flange Adapter Washer Notes

Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Victaulic flange adapter is oth-erwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a metal flange washer be inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing surface. See Spare Parts Section for flange washer prices.

Typical applications where a Victaulic flange washer should be used are:

1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. The flange washer is then inserted between the Victaulic flange adapter and the flange gasket.

2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Victaulic flange adapter.

3. When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange adapters and the rubber faced flange.

4. When mating C.I. flanges to IPS flanges: the flange washer is placed between two Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g. a flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Victaulic flange adapter.

5. When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above.



CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE





No. 67 End of Run Fitting

End of Run Fitting



10.01 for details.

ENd OF RUN FITTING

Nominal SizeApprox.

Weight Each Price Eachinches lb Painted Galv.

1Z\v x Z\x NPT 0.6 $97.00 $120.00

C\v NPT 0.5 97.00 120.001 NPT 0.6 97.00 120.00

1Z\x x Z\x NPT 0.7 97.00 120.00

C\v NPT 0.7 97.00 120.001 NPT 0.7 97.00 120.00

2 x Z\x NPT 0.7 103.00 136.00

C\v NPT 0.7 103.00 136.001 NPT 0.9 103.00 136.00

2Z\x x Z\x NPT 1.3 123.00 148.50

C\v NPT 1.2 123.00 148.501 NPT 1.3 123.00 148.50

3 x C\v NPT 2.0 161.50 199.001 NPT 1.9 161.50 199.00


No. 10-DR Drain Elbow

Drain Elbow

NO. 10-dRRefer to publication 10.05

USA


10.01 for details.

dRAIN ELBOW WITH 1” dRAIN

Nom. SizeApprox. Wgt. Ea. Price Each

inches lb Painted Galv.2Z\x 5.2 $242.50 $311.50

3 5.3 310.00 369.504 8.8 314.50 426.506 18.7 550.50 782.50

1-9



SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE








Series 728 FireLock™ Ball Valve

Fire Protection Valves

FireLock™ Ball Valve

SERIES 728Refer to publication 10.17

Threaded

Grooved


10.01 for details.

SERIES 728 – WITH WEATHERPROOF ACTUATOR

Nominal Size

T x T Ball Valve with Weatherproof Actuator †

G x G Ball Valve with Weatherproof Actuator † *

inches

Approx. Wgt. Each

lb Price Each

Approx. Wgt. Each

lb Price Each1 5.1 $343.00 – –

1Z\v 5.8 365.50 7.5 $365.501Z\x 6.6 433.50 8.5 433.50

2 8.5 523.00 10.5 523.00

* Grooved valve will come standard with a Z\x” NPT tap.† Please specify choice of grooved or threaded ends on order.

B - 020 - 4 6 6 T - W2

TypeAct.

In./mmSize

CodePressure

Rating Body/Ball Seat End Connection Operator

B 010012014020

1/251¼/321½/402/50

4 - 365 psi 6 - Bronze/Chrome Plated Brass

6 - Reinforced TFE T - ThreadedG - Grooved*

W2 - UL/ULC/FM Weatherproof Gear Operator w/2 SPDT SwitchesW9 - UL/FM Weatherproof Gear Operator with 2 SPDT Switches and Extra Long Wire Leads

* 1¼"/32 mm, 1½"/40 mm and 2"/50 mm only



CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE





Series 705 Butterfly Valve – Supervised OPEN

Butterfly Valve – Supervised OPEN

SERIES 705

(with weatherproof actuator)Refer to publication 10.81


10.01 for details.

SERIES 705 BUTTERFLY VALVE

Nominal Size

WRd – Pre-wired without Tap

WRd – Pre-wired with Tap

inches

Approx. Wgt. Each

lb Price Each

Approx. Wgt. Each

lb Price Each2 8.2 $692.50 8.2 $760.50

2Z\x 9.7 692.50 9.7 760.503 10.7 748.50 10.7 822.504 14.0 785.00 14.0 861.505 25.4 1176.00 23.7 –6 28.7 1115.00 28.7 1212.008 43.0 1708.00 43.0 1824.50

10 80.6 4134.00 – –12 94.6 5904.50 – –


Series 705 Weatherproof Actuator Replacement Kit

Weatherproof Actuator Replacement Kit

FOR SERIES 705 – SUPERVISEd OPEN ONLY

(Consists of mounting bolt, actuator, handwheel and assem-bly hardware)Refer to publication 10.81

GEAR OPERATOR REPAIR kIT FOR SERIES 705

Nominal Size inches Part Code

kit Price Each

2 K020705100 $671.002Z\x K024705100 671.00

3 K030705100 671.004 K040705100 720.505 K050705100 720.506 K060705100 783.508 K080705100 1851.00

10 K100705100 2408.0012 K120705100 2408.00


1-11



SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE






Series 707C Butterfly Valve – Supervised CLOSED

Butterfly Valve – Supervised CLOSEd

SERIES 707C

(with weatherproof actuator)Refer to publication 10.75


10.01 for details.

SERIES 707C – PRE-WIREd

Nominal Size

WRd – Pre-wired without Tap

inches

Approx. Wgt. Each

lb Part Code Price Each2 8.2 V020707900 $871.00

2Z\x 9.7 V024707900 871.003 10.7 V030707900 941.504 14.0 V040707900 986.505 25.4 V050707900 1477.506 28.7 V060707900 1401.508 43.0 V080707900 2145.50


Series 765 High Pressure Butterfly Valve – Supervised OPEN

High Pressure Butterfly Valve – Supervised OPEN

SERIES 765

(with Weatherproof Actuator)Refer to publication 10.80


10.01 for details.

SERIES 765 GROOVEd ENd HIGH PRESSURE BUTTERFLY VALVE

Nominal Size

Pre-wired without Tap

Pre-wired with Tap

inches

Approx. Wgt. Each

lb Price Each

Approx. Wgt. Each

lb Price Each2 9.5 $976.00 9.5 $1058.50

2Z\x 9.7 1010.00 9.7 1096.503 10.7 1092.00 10.7 1183.504 14.0 1144.50 14.0 1241.505 25.8 1713.50 25.8 1868.506 28.7 1625.00 28.7 1762.508 43.0 2488.50 43.0 2699.50

10 80.6 6025.00 – –12 94.6 8603.50 – –




CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE








Series 766 High Pressure Butterfly Valve – Supervised CLOSED

High Pressure Butterfly Valve – Supervised CLOSEd

SERIES 766

(with Weatherproof Actuator)Refer to publication 10.83


10.01 for details.

SERIES 766 GROOVEd ENd HIGH PRESSURE BUTTERFLY VALVE

Nominal Size

Pre-wired without Tap

inches

Approx. Wgt. Each

lb Part Code Price Each2 8.2 V020766900 $976.00

2Z\x 9.7 V024766900 1010.003 10.7 V030766900 1092.004 14.0 V040766900 1144.505 25.4 V050766900 1713.506 28.7 V060766900 1625.008 43.0 V080766900 2488.50


1-13



SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE





Series 771 OS&Y and Series 772 NRS Gate Valves

Series 771H OS&Y Groove x Groove Series 771F OS&Y Groove x Flange Series 772H NRS Groove x Groove Series 772F NRS Groove x Flange Gate ValvesRefer to publication 10.92 Series 771H Series 772H Series 771F Series 772F

Refer to Victaulic publication 10.01 for details.

Gate Valve Size inches

Approx. Weight Each

lb

Series 771H OS&Y Groove x Groove

Price Each

Series 771F OS&Y Groove x Flange

Price Each

Approx. Weight Each

lb

Series 772H NRS Groove x Groove

Price Each

Series 772F NRS Groove x Flange

Price Each2Z\x 30.6 $1073.50 $1073.50 29.3 $993.50 $993.50

3 36.0 1395.50 1395.50 63.0 1335.00 1335.004 77.0 1642.50 1642.50 70.0 1589.00 1589.006 144.0 2199.00 2199.00 117.0 2038.00 2038.008 170.0 3446.50 3446.50 188.0 3009.00 3009.00

10 344.7 4639.50 4639.50 297.7 4372.00 4372.0012 489.5 7237.00 7237.00 394.9 6117.00 6117.00

Flange Mounting Kits – Series 772H NRS

Flange Mounting Kits for use with Series 772H NRS Gate Valves

FLANGE MOUNTING kITS FOR USE WITH SERIES 772F NRS GATE VALVES


Victaulic Part Code Price Each

2Z\x – 3 K024772001 $271.004 K040772001 266.50

6 – 8 K060772001 321.0010 – 12 K100772001 495.50

HANdWHEELS FOR SERIES 772H ANd 772F NRS GATE VALVES


Victaulic Part Code Price Each

3 – 4 K030772002 $56.006 – 8 K060772002 152.50




CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE







Series 773 Series 774


10.01 for details.

SERIES 773 ANd SERIES 774 POST INdICATORS

description

Approx. Weight Ea.

lb

Series 773 Wall Post Indicator

Price EachSeries 773 Wall Post Indicator Wall Post Indicators include all hardware required to mount indicator to valve. 90.0 $1303.50

Series 774 Upright Post Indicator 250.0 2844.00

Supervisory Switches

Supervisory Switches SUPERVISORY SWITCHES

Model description Price EachOSY2 Outside Screw and Yoke Valve Supervisory Switch $371.00

Series 717H FireLock™ Check Valve

FireLock™ Check Valve

SERIES 717HRefer to publication 10.08


10.01 for details.

SERIES 717H

Size inches

Approx. Weight Each

lb Price Each2 10.7 $408.00

2Z\x 13.8 431.003 20.0 431.00

1-15



SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE







Series 717 FireLock™ Check Valve

FireLock™ Check Valve


2Z\x and 3”

4 – 12”


10.01 for details.

SERIES 717

Size inches

Approx. Weight Each

lb Price Each2Z\x 3.6 $431.00

3 3.6 431.004 20.0 448.505 27.0 1089.506 38.0 1116.008 64.0 1937.00

10 100.0 3690.0012 140.0 4813.50


Series 722 Threaded Ball Valve

Threaded Ball Valve



10.01 for details.

SERIES 722

Nominal Size inches

Approx. Wgt. Each

lb Price EachZ\v 0.2 $63.50Z\x 0.4 83.00C\v 0.7 84.001 1.0 111.00

1Z\v 1.5 176.001Z\x 2.1 230.00

2 2.4 289.00




CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE








Series 732H FireLock™ Wye-Type Vic-Strainer

FireLock™ Wye-Type Vic-Strainer

SERIES 732HRefer to publication 10.68


10.01 for details.

SERIES 732H

Nominal SizeApprox.

Weight Each Price Each

inches lb Galvanized *Standard

Basket Only2 10.0 $2095.50 $1369.50

2Z\x 14.0 2229.50 1427.503 20.0 2542.00 1241.504 32.0 2958.00 1290.50


* Vic-Strainer Series 732H standard components include galvanized body, access cap and coupling (Grade “E” EPDM, plated bolts and nuts) and Type 304 stainless steel basket (0.062” diameter holes for 2 – 3”/50 – 80 mm sizes; and 0.188” diameter holes for 4”/100 mm sizes). Contact Victaulic for details.

Series 720 Alarm Test Module

Alarm Test Module


Series 720T with Threaded Ends

Series 720G with Grooved Ends


ALARM TEST MOdULE

Size Style 720T NPT Threaded Style 720G Grooved

inches Orifice

Approx. Wgt. Each

lb Price Each

Approx. Wgt. Each

lb Price Each1 x Z\x 7.3 $371.50 – –

ZM\cx 7.3 371.50 – –1Z\v x Z\x 6.9 427.00 6.6 $427.00

ZM\cx 6.9 427.00 6.6 427.001Z\x x Z\x 9.0 696.50 8.5 696.50

ZM\cx 9.0 696.50 8.5 696.502 x Z\x 10.1 751.00 9.3 751.00

ZM\cx 10.1 751.00 9.3 751.00


1-17



SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE








Series 720 Alarm Test Module with Gauge Port Tap

Alarm Test Module

SERIES 720 WITH GAUGE PORT TAPRefer to publication 10.22


ALARM TEST MOdULE – WITH GAUGE PORT TAP

SizeStyle 720T Threaded with Gauge Port

Tap Style 720G Grooved with Gauge Port Tap

inches Orifice

Approx. Wgt. Each

lb Price Each

Approx. Wgt. Each

lb Price Each1 x Z\x 7.3 $410.50 – –

ZM\cx 7.3 410.50 – –1Z\v x Z\x 6.9 465.00 6.6 $465.00

ZM\cx 6.9 465.00 6.6 465.001Z\x x Z\x 9.0 736.50 8.5 736.50

ZM\cx 9.0 736.50 8.5 736.502 x Z\x 10.1 790.00 9.3 790.00

ZM\cx 10.1 790.00 9.3 790.00


Series 720 Alarm Test Module with Pressure Relief Option

Alarm Test Module

SERIES 720 WITH PRESSURE RELIEF OPTIONRefer to publication 10.22


ALARM TEST MOdULE – WITH PRESSSURE RELIEF OPTION

Size Style 720T Threaded with Pressure Relief Option

inches Orifice

Approx. Wgt. Each

lb Price Each1 x Z\x 7.3 $551.50

ZM\cx 7.3 551.501Z\v x Z\x 6.9 613.50

ZM\cx 6.9 613.501Z\x x Z\x 9.0 889.00

ZM\cx 9.0 889.002 x Z\x 10.1 924.00

ZM\cx 10.1 924.00


Series 720 Alarm Test Module With Pressure Relief and Gauge Port Options

Alarm Test Module

SERIES 720 WITH PRESSURE RELIEF ANd GAUGE PORT OPTIONSRefer to publication 10.22


ALARM TEST MOdULE – WITH PRESSURE RELIEF ANd GAUGE PORT OPTIONS

Size Style 720T Threaded with Pressure Relief and Gauge Port Option

inches Orifice

Approx. Wgt. Each

lb Price Each1 x Z\x 7.3 $590.50

ZM\cx 7.3 590.501Z\v x Z\x 6.9 653.00

ZM\cx 6.9 653.001Z\x x Z\x 9.0 929.00

ZM\cx 9.0 929.002 x Z\x 10.1 964.50

ZM\cx 10.1 964.50




CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE











Pressure Relief Valve Kit for Series 720

Pressure Relief Valve Kit

FOR SERIES 720 WITH PRESSURE RELIEF OPTION

SERIES 720 PRESSURE RELIEF VALVE kIT

Riser Module Body Size

Victaulic Price

Nominal inches Part Code Each1 –2 V000720K01 $279.00

Series 747M Commercial Zone Control Riser Module

Commercial Zone Control Riser Module

SERIES 747MRefer to publication 10.96


SERIES 747M – COMMERCIAL ZONE CONTROL RISER MOdULE

Riser Module Body Size drain Size

Approx. Wgt. Each Price Each

Nominal inches inches lbStyle 747M Grooved *

Style 747M Preassembled with Pressure Relief kit

1Z\v 1 15.2 $1002.00 $1517.50

1Z\x 1 15.5 1024.00 1539.502 1 19.9 1072.00 1587.50

2Z\x 1Z\v 22.7 1158.50 1673.503 1Z\v 23.2 1215.50 1731.004 2 30.3 1490.00 2005.506 2 36.7 1663.00 2178.00


*Price includes all components pictured at left.

See Part Code Configuration Guide

Series 247 Residential Zone Control Riser Module

Residential Zone Control Riser Module



SERIES 247 – RESIdENTIAL ZONE CONTROL RISER MOdULE

Riser Module Body Size drain Size

Approx. Wgt. Each Price Each

Nominal inches inches lb Style 247M Grooved *1 1 15.2 $941.00

1Z\v 1 15.2 1002.001Z\x 1 15.5 1024.00

2 1 19.9 1072.00

See Part Code Configuration Guide

*Price includes all components pictured at left.

1-19



SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE








Pressure Relief Valve Kit for Series 747M and 247

Pressure Relief Valve Kit

FOR SERIES 747M ANd 247 RISER MOdULESRefer to publication 10.97

SERIES 747M ANd 247 PRESSURE RELIEF VALVE kIT

Riser Module Body Size Victaulic Price

Nominal inches Part Code Each1 – 6 V000747K01 $463.50

Part Code Configuration Guide

SERIES 247 ANd SERIES 747M

SERIES 247 ANd 747M RISER MOdULES PART COdE CONFIGURATION GUIdE

Code definition OptionsA Class V : Fluid Control Devices

BBB Size (inlet x outlet x drain) Note 2 *

010 : 1” x 1” x 1”012 : 1Z\v” x 1Z\v” x 1”014 : 1Z\x” x 1Z\x” x 1”020 : 2” x 2” x 1”024 : 2Z\x” x 2Z\x” x 1Z\v”030 : 3” x 3” x 1Z\v”040 : 4” x 4” x 2”060 : 6” x 6” x 2”

CCC Series 247 : Series 247 Residential Riser Module747 : Series 747M Commercial Riser Module

D Finish P : Painted in Orange colorE Drain Type G : Grooved Connection

F : NPT Female Threaded ConnectionF Trim Selection S : Standard TrimG Approved Agency U : UL/FM

C : ULC/FMHHH K Factor (Orifice)

Note 3 *028 (K2.8), 030 (K3.0), 035 (K3.5), 042 (K4.2), 049 (K4.9), 056 (K5.6), 069 (K6.9), 080 (K8.0), 112 (K11.2), 140 (K14.0), 168 (K16.8), 250 (K25.0)

Notes 1. Example: “V040747PFSU56” denotes a Series 747M Commercial Zone Control Riser Module

painted in orange color; 4” grooved inlet/4” grooved outlet/2” grooved drain connection; stan-dard trim; UL/FM approved; with K5.6 flow restrictor.

2. Available sizes for Series 247 Residential Riser Modules : 010, 012, 014, 020 Available sizes for Series 747M Commercial Riser Modules : 012, 014, 020, 024, 030,

040, 0603. Approved K Factors for 1” to 2” Series 247 Residential Riser

Modules: 028, 030, 035, 042, 049, 056

Approved K Factors for 1Z\v” to 2” Series 747M Commercial Riser Modules

: 028, 030, 035, 042, 049, 056

Approved K Factors for 2Z\x” to 3” Series 747M Commercial Riser Modules

: 042, 049, 056, 069, 080, 112, 140, 168

Approved K Factors for 4” to 6” Series 747M Commercial Riser Modules

: 042, 049, 056, 069, 080, 112, 140, 168, 250



CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE



Series 735 Fire Pump Test Meter

Fire Pump Test Meter



10.01 for details.

SERIES 735 – MOdEL S OR MOdEL L

Nominal Size

Gallons Minute Style 735 Model S Style 735 Model L

inches (GPM)Wgt. Ea.

lb Price EachWgt. Ea.

lb Price Each2Z\x 100 9.0 $10934.00 14.0 $17648.502Z\x 150 9.0 10934.00 14.0 17648.50

3 200 10.0 12036.00 15.0 18872.004 250 12.0 13679.50 17.0 19651.004 300 12.0 13679.50 17.0 19651.004 450 12.0 13679.50 17.0 19651.005 500 13.0 15021.50 18.0 19746.006 750 15.0 16395.00 20.0 21500.006 1000 15.0 16395.00 20.0 21500.006 1250 15.0 16395.00 20.0 21500.008 1500 22.0 18575.50 27.0 23949.508 2000 22.0 18575.50 27.0 23949.508 2500 22.0 18575.50 27.0 23949.508 3000 22.0 18575.50 27.0 23949.50

10 3500 33.0 22126.50 38.0 27860.5010 4000 33.0 22126.50 38.0 27860.5010 4500 33.0 22126.50 38.0 27860.5012 5000 66.0 27589.00 71.0 34128.00


1-21



SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE





FireLock™ Innovative Groove System (IGS)No. 142 Welded Outlet

FireLock™ IGS Groove System

Welded Outlet


NO. 142 WELdEd OUTLET

Nom. Size inches

Approx. Wgt. Ea.

Price Per Box of 100Run x Branch lb1Z\v – 1Z\x x 1 0.2 $371.00

1Z\x – 2 0.2 371.002 – 2Z\x 0.2 371.002Z\x – 3 0.2 371.00

3 – 4 0.2 371.00

Style 922 Outlet-T

Outlet-T


STYLE 922 OUTLET-T – GRAdE “E” (TYPE A) GASkET

Nom. Size inches

Approx. Wgt. Ea.

COMPLETE OUTLET-T with Grade “E” (Type A) Gasket

Run x Branch lbPrice Each

Painted Galv.1Z\v x 1 1.1 $13.00 $15.50

1Z\x 1.2 13.00 16.002 1.2 13.50 16.00

2Z\x 1.6 15.00 18.00



FireLock™ System for IGS Grooved IPS PipeSE

CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE




No. 101 Installation-Ready™ 90° Elbow

Installation-Ready™ 90° Elbow


NO. 101 INSTALLATION-REAdY™ 90° ELBOW

SizeApprox. Wgt. Ea. Price Each

Nominal inches

Actual Outside diameter inches lb Painted Galv.

1 1.315 2.2 $14.00 $18.00


Style 108 Installation-Ready™ Rigid Coupling

Installation-Ready™ Rigid Coupling


STYLE 108 INSTALLATION-REAdY™ RIGId COUPLING


Nominal inches

Actual Outside diameter inches lb Painted

1 1.315 1.5 $10.00 $12.00


1-23

FireLock™ System for IGS Grooved IPS Pipe


SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE




No. 102 Installation-Ready™ Tee

Installation-Ready™ Tee


NO. 102 INSTALLATION-REAdY™ TEE


Nominal inches

Actual Outside diameter inches lb Painted Galv.

1 1.315 3 $17.00 $22.50


No. 148 Sprinkler Reducer

Sprinkler Reducer

NO. 148

NPT or BSPT Sprinkler OutletRefer to publication 10.54

NO. 148 SPRINkLER REdUCER

End to End Nominal SizeApprox. Wgt.

Each Units Price

inches inchesThreaded Outlet Size

lb Per Boxinches3.0 1 Z\x C\v 0.4 50 $205.003.5 1 Z\x C\v 0.5 50 225.004.0 1 Z\x C\v 0.6 50 245.004.5 1 Z\x C\v 0.6 50 265.005.0 1 Z\x C\v 0.7 50 285.005.5 1 Z\x C\v 0.8 40 244.006.0 1 Z\x C\v 0.8 40 260.00

12.0 1 Z\x C\v 1.7 20 260.0018.0 1 Z\x C\v 2.5 10 125.0024.0 1 Z\x C\v 3.4 10 150.0030.0 1 Z\x C\v 4.2 8 140.0036.0 1 Z\x C\v 5.0 8 160.00

Note: 36” size features sprinkler outlet on both ends



CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE




No. 143 Close Nipple

Close Nipple


NO. 143 CLOSE NIPPLE

Size End to EndApprox. Wgt.

Each Price

NominalActual Outside

diameterinches lb Box of 25inches

1 1.315 1.5 0.2 $39.001 1.315 2.0 0.3 51.501 1.315 2.5 0.4 62.501 1.315 3.0 0.4 75.001 1.315 3.5 0.5 85.001 1.315 4.0 0.6 97.501 1.315 4.5 0.6 111.501 1.315 5.0 0.7 124.00

No. 145 Female Threaded x Groove 90° Elbow

Female Threaded x Groove 90° Elbow


NO. 145 FEMALE THREAdEd x GROOVE 90° ELBOW

SizeApprox. Wgt. Ea.

Price Each

Nominal inches

lb Painted Galv.Threaded x

GroovedZ\x x 1 0.5 $6.00 $7.00

C\v 0.5 6.00 7.001 0.5 6.00 7.00


No. 146 Cap

Cap


NO. 146 CAP

SizeApprox. Wgt. Ea. Price per Box of 20

Nominal inches

Actual Outside diameter inches lb Painted Galvanized

1 1.315 0.2 $80.00 $102.00


1-25

FireLock™ System for IGS Grooved IPS Pipe


SECTIO

N 1

FIR

ELOCk

™ SYS

TEM FO

R G

RO

OVEd

IPS

PIPE





No. 140 Male Threaded x Groove Adapter

Male Threaded x Groove Adapter


NO. 140 MALE THREAdEd x GROOVE AdAPTER

Size inches

Approx. Wgt. Ea.

Price Per Box of 50Nom. Size Outside dia. lb1 1.315 0.3 $185.50

No. 141 Female Threaded x Groove Adapter

Female Threaded x Groove Adapter


NO. 141 FEMALE THREAdEd x GROOVE AdAPTER

SizeApprox. Wgt. Ea.

Price Per Box of 50Nominal inches

Actual Outside diameter inches lb

1 1.315 0.5 $185.50

Series 147 End Cap Assembly

End Cap Assembly


SERIES 147 ENd CAP ASSEMBLY

PIPE inches

Approx. Wgt. Ea.

End Cap Assembly Consisting of Style 108 Coupling and No. 146 Cap with

Grade “E” (Type A) Gasket

Nom. Size Outside dia. lbPrice Each

Painted Galv.1 1.315 1.7 $15.50 $22.50




CTI

ON

1

FIR

ELO

Ck

™ S

YSTE

M F

OR

GR

OO

VEd

IP

S P

IPE





SECTION 2 – Victaulic® Hydraulic Control Valves

Victaulic® Hydraulic Control Valves



Victaulic® Hydraulic Control Valves

Victaulic® Hydraulic Control ValvesVi

ctau

lic®

Hyd

raul

ic C

ontr

ol V

alve

s

Pres

sure

Cont

rol

Serie

s 867

-400

Press

ure Re

ducin

g Valv

eSe

ries 8

67-7U

L Pres

sure R

educ

ing Va

lveSe

ries 8

67-4U

F Pres

sure R

elief

Valve

Serie

s 867

-7UF P

ressur

e Reli

ef Va

lveSe

ries 8

67-45

9 Pres

sure R

elief

Valve

with

Elec

tric O

verri

deSe

ries 8

67-75

9 Pres

sure R

elief

Valve

with

Elec

tric O

verri

deSe

ries 8

67-43

6 Di�e

rentia

l Pres

sure S

ustai

ning V

alve

Serie

s 867

-42T P

ressur

e Red

ucing

Valve

Serie

s 867

-43T P

ressur

e Reli

ef Va

lveLe

vel C

ontro

lSe

ries 8

66-4

60 Le

vel C

ontro

l Valv

e with

Mod

ulatin

g Hori

zonta

l Floa

tSe

ries 8

66-4

65 Le

vel C

ontro

l Valv

e with

Bi-Le

vel El

ectri

c Floa

tSe

ries 8

66-4

66 Le

vel C

ontro

l Valv

e with

Bi-Le

vel V

ertica

l Floa

tSe

ries 8

66-4

82 Le

vel C

ontro

l Valv

e with

Altit

ude P

ilot

Classi

c Delu

ge 1

869/Y

-1M Hy

drauli

cally C

ontro

lled D

eluge

Valve

with

EasyL

ock M

anua

l Rese

t86

9/Y-2M

Elec

tronic

ally C

ontro

lled D

eluge

Valve

with

EasyL

ock M

anua

l Rese

t86

9/Y-3M

Elec

tro-Pn

euma

ticall

y Con

trolle

d Delu

ge Va

lve w

ith Ea

syLoc

k Man

ual R

eset

869/Y

-4M Pn

euma

ticall

y Con

trolle

d Delu

ge Va

lve w

ith Ea

syLoc

k Man

ual R

eset

869/Y

-5M Hy

drauli

cally C

ontro

lled,

Anti-

Colum

ning D

eluge

Valve

with

EasyL

ock M

anua

l Rese

tCo

mbin

ation

Pres

sure

Cont

rol D

eluge

1

869/Y

-2MC E

lectri

c Pres

sure C

ontro

l Delu

ge Va

lve w

ith M

anua

l Rese

t86

9/Y-3D

C Elec

tric P

ressur

e Con

trol O

n/O� D

eluge

Valve

869/Y

-4DC P

neum

atic P

ressur

e Con

trol O

n/O� D

eluge

Valve

869/Y

-5DC H

ydrau

lic Pre

ssure

Contr

ol On

/O� D

eluge

Valve

869/Y

-6DC E

lectro

-Pneu

matic

Press

ure Co

ntrol

On/O

� Delu

ge Va

lveOn

/O�

Delug

e 1

869/Y

-3D El

ectri

cally C

ontro

lled O

n/O� D

eluge

Valve

869/Y

-3D-R

L Elec

trical

ly Con

trolle

d On/O

� Delu

ge Va

lve w

ith El

ectri

c Rem

ote Re

set La

tch86

9/Y-4D

Pneu

matic

ally C

ontro

lled O

n/O� D

eluge

Valve

869/Y

-5D Hy

drauli

cally C

ontro

lled O

n/O� D

eluge

Valve

869/Y

- 6D E

lectro

-Pneu

matic

ally C

ontro

lled O

n/O� D

eluge

Valve

Clas

sSe

ries

Size

Valv

e Pat

tern

Body

Mat

eria

lOp

tions

Coat

ing

Volta

geTu

bing

and

Fitti

ngs

End

Conn

ectio

nsG -

Glob

e Typ

e (80

0E/80

0Y

Sta

ndard

) Y -

Y Typ

e (80

0 Only

) A -

Ang

le (80

0 Only

)

C - D

uctile

Iron

S - Ca

st Ste

elN -

Stain

less S

teel 31

6B -

Bron

zeU -

Nick

el Al.

Bron

ze

015

020

025

761

030

040

160

165

080

100

120

FP -

Stand

ardFS

- Sea

water

FC - F

oam

C

oncen

trate

1 ½"

2" 2 ½"

76.1 m

m3" 4" 16

5.1 m

m6" 8" 10

"12

"

A5 -

ANSI

#150

RFa5

- AN

SI #1

50FF

A3 -

ANSI

#300

RF16

- ISO

-PN16

25 -

ISO-PN

25VI

- Groo

ved A

NSI

C6

06-81

(

Stand

ard)

NP -

Fema

le NP

T

PR -

Polye

ster

Re

d

(

Stand

ard)

ER -

High B

uilt

Epox

y Red

UC

- Un

coated

NN -

Stainl

ess

St

eel 31

6

(Stan

dard)

MM

- Mo

nel

NA -

Not A

pplic

able

4DC -

24VD

C - N.

C.4D

O - 24

VDC -

N.O.

4DS -

4DS -

24VD

C -

Mag

na La

tch5D

C - 11

0VDC

- N.C.

5DO -

110V

DC - N

.O.5A

C - 11

0V/50

-60 N

.C.5A

O - 11

0V/50

-60 -

N.O.

2AC -

220V

/50-6

0 N.C.

2AO -

220V

/50-6

0 - N.

O.

A - A

Trim

P - P

ressur

e Swi

tch Ge

neral

P7 -

Ex Pr

oof P

ressur

e Swi

tchP9

- EE

xd AT

EX Pr

essure

Switc

hS -

Sing

le Lim

it Swi

tch, G

enera

l Purp

oseS7

- Sin

gle Ex

Proo

f, Lim

it Swi

tchS9

- Sin

gle EE

xd Pr

oxim

ity Lim

it Swi

tchSS

9 - D

ouble

EExd

Prox

imity

Limit S

witch

6 - P

ressur

e Gau

ge As

sembly

6n -

S.S. G

lyceri

n Pres

sure G

uage

Assem

bly6m

- Mo

nel P

ressur

e Gua

ge As

sembly

7 - Ex

Proo

f NEC

Class

1 Div.

1 Sole

noid

9 - Ee

xd AT

EX So

lenoid

DC -

Drip

Check

DV -

Drain

Valve

D - M

anua

l Emerg

ency

Relea

se Bo

x H -

Mach

anica

l Latch

ingW

- Wate

r Moto

r Alar

m As

sembly

E - Sp

ecial

Elasto

mer

F - La

rge Co

ntrol

Filter

I - Va

lve Po

sition

Indic

ator

J - Ju

nctio

n Box

N - S.

S. 31

6 Trim

Acces

sories

Q - P

ressur

e Tran

smitt

erK -

Speci

al

Nam

e/Co

mpa

ny:

E-m

ail:

Phon

e:

This

form

mus

t be

�lle

d ou

t com

plet

ely

with

eac

h or

der a

nd s

ent

with

you

r pur

chas

e or

der.

Plea

se F

AX

to y

our l

ocal

Cus

tom

er C

are

Cent

er(s

ee b

ack

cove

r for

con

tact

info

rmat

ion)

.

NO

TE: P

rice

is n

ot d

epen

dent

on

end

conn

ectio

ns o

r rig

ht a

ngle

con

�gur

atio

n un

less

oth

erw

ise

stat

ed.

NO

TE: "

A" tr

im in

clud

es g

auge

s, dr

ip c

heck

, dra

in, m

anua

l pul

l sta

tion,

and

all

nece

ssar

y tr

im fo

r val

ve fu

nctio

n.1 A

vaila

ble

as 8

00E

and

800Y

val

ve s

tyle

s.


Victaulic® Hydraulic Control Valves SE

CTI

ON

2

HYd

RAU

LIC

CO

NTR

OL

VALV

ES


Series 867-42T Pressure Reducing Valve

Pressure Control Valves

Pressure Reducing Valve

SERIES 867-42T BERMAd MOdEL FP 42TRefer to publication 30.93

Nominal Size High Built Epoxy Red (Standard) *

inchesOGS ANSI Class 300RF

Price Each1Z\x $3329.50 –

2 3744.00 –2Z\x 3636.50 –

3 4394.50 $5121.504 6348.00 6995.006 12360.00 12360.008 17681.00 17680.00

10 – 34910.50


* Other finishes and valve body materials available upon request.

Agency approvals, such as UL and FM, vary by size and end connection. Refer to publication 30.93 for details.

Series 867-7UL Pressure Reducing Valve


SERIES 867-7UL BERMAd MOdEL FP 720-ULRefer to publication 30.93

Nominal Size Standard Polyester Red Coating (Standard) *

inchesOGS ANSI Class 150RF ANSI Class 300RF NPT

Price Each1Z\x $2767.50 $4077.50 $4733.50 –

2 2930.50 2916.50 3342.00 $2909.002Z\x 3131.50 3360.00 3829.50 3362.50

3 3299.50 3735.50 4147.00 3754.504 4335.50 4896.50 5186.00 –6 7262.50 7739.00 8523.00 –8 12683.50 13675.50 – –

10 – 27946.00 – –12 – 39571.50 – –




Above pricing based on model FP-XXX-867-7UL-Y-C-XX-PR-NN-66. All other configurations are priced on application.


Victaulic® Hydraulic Control ValvesSEC

TION

2

HYd

RAU

LIC C

ON

TRO

L VALVE

S




Series 867-43T Pressure Relief Valve

Pressure Relief Valve

SERIES 867-43T BERMAd MOdEL FP 43TRefer to publication 30.93


inchesOGS ANSI Class 300RF

Price Each1Z\x $3339.50 –

2 3492.50 –2Z\x 4191.50 –

3 4415.50 $4415.504 5622.00 5622.006 8181.50 8181.508 12402.00 12402.00






SERIES 867-4UF BERMAd MOdEL FP 430-UFRefer to publication 30.93


inchesOGS ANSI Class 150RF NPT

Price Each2 – $3266.50 $3286.003 $4143.50 4246.50 –4 5518.00 5328.50 –6 9266.00 9185.50 –8 11676.50 11803.00 –

10 – 18366.00 –12 – 26680.00 –




Above pricing based on model FP-XXX-867-4UF-G-C-ER-NN. All other configurations are priced on application.


Victaulic® Hydraulic Control ValvesSE

CTI

ON

2

HYd

RAU

LIC

CO

NTR

OL

VALV

ES






SERIES 867-7UF BERMAd MOdEL FP 730-UFRefer to publication 30.93

Nominal Size Standard Polyester Red Coating (Standard) *

inchesOGS

ANSI Class 150RF

ANSI Class 150RF Angled

ANSI Class 300RF NPT

Price Each1Z\x $4571.00 $4571.00 $4571.00 – –

2 3500.50 3500.50 3500.50 $3500.21 $3497.502Z\x 3522.50 3522.50 3522.50 – 3530.00

3 4521.00 4548.50 4548.50 4479.00 –4 6809.50 6928.50 6928.50 6819.50 –6 11076.00 11662.00 11662.00 11258.50 –8 16145.50 16814.00 16814.00 – –

10 – 29215.50 29215.50 – –12 – 41626.50 41626.50 – –




Above pricing based on model FP-XXX-867-7UF-X-C-XX-PR-NN. All other configurations are priced on application.

Series 867-400 Pressure Reducing Valve


SERIES 867-400 BERMAd MOdEL FP 420-00Refer to publication 30.93


inchesOGS ANSI Class 150RF NPT

Price Each2 – $3266.50 $3286.003 $4143.50 4246.50 –4 5364.00 5328.50 –6 9266.00 9185.50 –8 11676.50 11803.00 –

10 – 18366.00 –12 – 26680.00 –



Above pricing based on model FP-XXX-867-400-G-C-XX-ER-NN. All other configurations are priced on application.

Series 867-459 Pressure Relief Valve with Electric Override


SERIES 867-459 BERMAd MOdEL FP 430-59

with Electric OverrideRefer to publication 30.93

Nominal Size High Built Epoxy Red (Standard) *inches Price Each

2 $4975.503 6047.004 7271.006 10705.008 14803.50

10 22099.5012 30379.50



End connection is not differentiated by price. OGS, Class 150RF flange and NPT available.

Above pricing based on model FP-XXX-867-459-G-C-XX-ER-4DC-NN. All other configurations are priced on application.


Victaulic® Hydraulic Control Valves SEC

TION

2

HYd

RAU

LIC C

ON

TRO

L VALVE

S







SERIES 867-759 BERMAd MOdEL FP 730-59Refer to publication 30.93

Nominal Size Standard Polyester Red Coating (Standard) *inches Price Each

2 +2Z\x +

3 +4 +6 +8 +

10 +12 +


+ Quoted on application. Contact Victaulic for pricing and availability.



Above pricing based on model FP-XXX-867-759-Y-C-XX-PR-4DC-NN. All other configurations are priced on application.

BERMAD FP-436 Differential Pressure Sustaining Valve

BERMAD Differential Pressure Sustaining Valve

SERIES 867-436 BERMAd FP-436


2 $4274.003 5318.004 6571.506 9869.508 13881.50

10 21037.0012 29158.50







CTI

ON

2

HYd

RAU

LIC

CO

NTR

OL

VALV

ES



Series 866-460 Level Control BERMAD Valve with Modulating Horizontal Float

Level Control Valves

Level Control BERMAD Valve

SERIES 866-460 BERMAd FP-450-60

with Modulating Horizontal FloatRefer to publication 30.93


2 $3341.503 4407.504 5629.006 9100.008 13169.00

10 20356.0012 30529.50





Series 866-465 Level Control BERMAD Valve with Bi-Level Electric Float



with Bi-Level Electric Float


2 $3968.003 5026.004 6250.506 9711.508 13806.50

10 20975.0012 31164.00




Above pricing based on model FP-XXX-866-465-G-C-XX-ER-4DC-NN N. All other configurations are priced on application.



TION

2

HYd

RAU

LIC C

ON

TRO

L VALVE

S



Series 866-466 Level Control BERMAD Valve with Vertical Float



with Vertical Float


2 $5363.503 6060.004 7281.506 10796.008 14474.00

10 22735.0012 32994.50




Above pricing based on model FP-XXX-866-466-G-C-ER-NN. All other configurations are priced on application.

Series 866-480 Level Control BERMAD Valve with Altitude Pilot



with Altitude Pilot


2 $5363.503 6060.004 7281.506 10796.008 14474.00

10 22735.0012 32994.50




Above pricing based on model FP-XXX-866-480-M6-G-C-XX-ER-NN. All other configurations are priced on application.

Series 866-482 Level Control BERMAD Valve with Altitude Pilot



with Altitude Pilot


2 $5363.503 6060.004 7281.506 10796.008 14474.00

10 22735.0012 32994.50




Above pricing based on model FP-XXX-866-482-M6-G-C-XX-ER-NN. All other configurations are priced on application.



CTI

ON

2

HYd

RAU

LIC

CO

NTR

OL

VALV

ES


Victaulic® Hydraulic Control Valve Accessories

Accessories Component description Configurator Code Price EachPressure Switch (Std.) P $783.00Ex. Proof Pressure Switch P7 2843.00EEx d Pressure Switch P9 3181.00Position Indicator (Std. Materials) 2 – 4” I 1573.50Position Indicator (Std. Materials) 6 – 12” I 1897.50Limit Switch Assembly S 2154.50Ex. Proof Limit Switch Assembly/UL S7 4463.50Ex. Proof/EEx.d Limit Switch/Proximity Switch S9 5457.50Double Ex. Proof/EEx.d Limit Switch/Proximity Switch SS9 8190.00Ex. Proof Junction Box J 590.00Large Control Filter F 1484.50Water Motor Alarm Assembly including Strainer W 1354.00Mechanical-Latch Adder H 1779.50Std. Pressure Gauge Plus Manometer Block Valve 6 158.50S.S. Glycerin Pressure Gauge Plus Manometer Block Valve 6n 590.00Solenoid Ex. Proof Ex. NEMA 7 and 9 7 764.40Solenoid Ex.Proof EEx. m. ATEX 8 938.00Solenoid Ex.Proof EEx. d. ATEX 9 1761.00




TION

2

HYd

RAU

LIC C

ON

TRO

L VALVE

S




SECTION 3 – Hole Cut Products

Hole Cut Products



Styles 920/920N Mechanical-T Outlet

Mechanical-T Outlet

STYLES 920/920NRefer to publication 11.02

Style 920 Female


10.01 for details.

STYLE 920 – FEMALE THREAdEd BRANCH

Size StyleCOMPLETE MECHANICAL-T Female Threaded Branch † Spare Parts

inches Run x Brch. Number

Approx. Wgt. Ea.

lb

Price Each

Bolts & Nuts Size

inches

Standard Grade “E” or “T”

GasketsPainted Galv.2 x Z\x 920N 3.1 $97.00 $122.00 Z\x x 2C\v $21.00

C\v 920N 3.1 97.00 122.00 Z\x x 2C\v 21.001 920N 3.0 97.00 122.00 Z\x x 2C\v 21.00

1Z\v 920N 3.5 111.50 138.50 Z\x x 2C\v 24.00

1Z\x 920N 3.6 111.50 138.50 Z\x x 2C\v 24.00

2Z\x x Z\x 920N 3.0 97.00 122.00 Z\x x 2C\v 21.00

C\v 920N 3.0 97.00 122.00 Z\x x 2C\v 21.001 920N 2.9 97.00 122.00 Z\x x 2C\v 21.00

1Z\v 920N 3.5 136.00 165.00 Z\x x 3Z\v 24.00

1Z\x 920N 3.6 136.00 165.00 Z\x x 3 24.003 x Z\x 920N 3.4 111.50 136.00 Z\x x 2C\v 21.00

C\v 920N 3.4 111.50 136.00 Z\x x 2C\v 21.001 920N 3.3 111.50 136.00 Z\x x 2C\v 21.00

1Z\v § 920N 3.8 140.50 176.00 Z\x x 2C\v 24.00

1Z\x § 920N 4.1 140.50 176.00 Z\x x 2C\v 24.002 § 920N 4.9 162.00 200.50 Z\x x 3Z\v 24.00

4 x Z\x 920N 3.7 140.00 167.00 Z\x x 2C\v 21.00

C\v 920N 3.7 140.00 167.00 Z\x x 2C\v 21.001 920N 3.6 140.00 167.00 Z\x x 2C\v 21.00

1Z\v 920N 4.0 164.00 193.50 Z\x x 2C\v 24.00

1Z\x 920N 4.2 170.00 214.00 Z\x x 2C\v 24.002 920N 5.0 170.00 216.00 Z\x x 2C\v 24.00

2Z\x 920 5.8 177.50 229.50 1 x 2C\v 27.003 920 8.4 189.00 242.50 1 x 3Z\v 30.00

5 x 1Z\x 920 7.7 207.50 263.00 B\, x 4C\v 24.002 920 8.2 207.50 263.00 B\, x 4C\v 24.00

2Z\x 920 8.3 219.00 279.00 B\, x 4C\v 27.003 920 8.4 233.00 299.50 B\, x 4C\v 30.00

6 x 1Z\v 920N – – – Z\x x 2C\v 24.00

1Z\x 920N 5.1 213.00 272.00 Z\x x 2C\v 24.002 920N 5.6 213.00 272.00 Z\x x 2C\v 24.00

2Z\x 920 7.6 229.00 296.00 B\, x 4C\v 27.003 920 8.4 243.50 312.50 B\, x 4C\v 30.004 920 10.1 270.00 350.50 B\, x 4C\v 39.50

8 x 2 920 11.6 371.00 467.50 C\v x 4Z\v 28.50

2Z\x 920 11.6 371.00 467.50 C\v x 4Z\v 28.503 920 12.6 391.50 496.00 C\v x 4Z\v 30.004 920 15.3 403.00 520.00 C\v x 4Z\v 39.50


Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.

† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.

§ Requires Z\x x 3Z\v” bolts when used in cross configuration.


Hole Cut ProductsSE

CTI

ON

3

HO

LE C

UT

PR

Od

UC

TS





Mechanical-T Outlet

STYLES 920/920NRefer to publication 11.02

Style 920 Grooved

Refer to

Victaulic pub-lication 10.01

for details.

STYLES 920/920N GROOVEd MECHANICAL-T OUTLET

Size StyleCOMPLETE MECHANICAL-T

Grooved Branch Spare Parts

inches Run x Branch Number

Approx. Wgt. Ea.

lb

Price Each

Bolts & Nuts Size

inches

Standard Grade “E” or “T”

GasketsPainted Galv.2 x 1 920N – – – – $21.00

1Z\v 920N 3.2 $111.50 $138.50 Z\x x 2C\v 24.00

1Z\x 920N 3.2 111.50 138.50 Z\x x 2C\v 24.00

2Z\x x 1 920N – – – – 21.001Z\v 920N 3.2 136.00 165.00 Z\x x 3Z\v 24.00

1Z\x 920N 3.3 136.00 165.00 Z\x x 3 24.003 x 1 920N – – – – 21.00

1Z\v § 920N 3.7 140.50 176.00 Z\x x 2C\v 24.00

1Z\x § 920N 3.8 140.50 176.00 Z\x x 2C\v 24.002 § 920N 4.6 162.00 200.50 Z\x x 3Z\v 24.00

3Z\x x 2 920N 3.8 625.50 781.50 Z\x x 2C\v 24.004 x 1 920N – – – – 21.00

1Z\v 920N 3.6 164.00 193.50 Z\x x 2C\v 24.00

1Z\x 920N 3.9 170.00 214.00 Z\x x 2C\v 24.002 920N 4.6 170.00 216.00 Z\x x 2C\v 24.00

2Z\x 920 5.0 177.50 229.50 Z\x x 2C\v 27.003 920 6.4 189.00 242.50 Z\x x 3Z\v 30.00

5 x 1Z\x 920 7.6 207.50 263.00 B\, x 4C\v 24.002 920 8.0 207.50 263.00 B\, x 4C\v 24.00

2Z\x 920 7.9 219.00 279.00 B\, x 4C\v 27.003 920 8.8 233.00 299.50 B\, x 4C\v 30.00

6 x 1Z\v 920N 4.8 213.00 272.00 Z\x x 2C\v 24.00

1Z\x 920N 5.1 213.00 272.00 Z\x x 2C\v 24.002 920N 5.6 213.00 272.00 Z\x x 2C\v 24.00

2Z\x 920 7.6 233.00 296.00 B\, x 4C\v 27.003 920 8.4 243.50 312.50 B\, x 4C\v 30.004 920 10.1 270.00 350.50 B\, x 4C\v 39.50

8 x 2 920 11.6 371.00 467.50 C\v x 4Z\v 28.50

2Z\x 920 11.6 371.00 467.50 C\v x 4Z\v 28.503 920 11.6 391.50 496.00 C\v x 4Z\v 30.004 920 12.5 403.00 520.00 C\v x 4Z\v 39.50


Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.


3-3

Hole Cut Products


SECTIO

N 3

H

OLE

CUT P

RO

dU

CTS







Vic-Tap II

Vic-Tap II * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi.

Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II.

Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.

Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x 2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).

* Parts A & B can be purchased separately.

Tool Model Part Number

Shipping Weight

lbRental

Per Month List PriceVic-Tap II - Parts A and B only R000902VT2 70 $5306.50 $11658.50Part A only R100902VT2 – – 7952.50Part B only R300901VT1 – – 7967.00Part C †4 x 2Z\x”/100 – 65 mm R016931010 – – 2337.005 x 2Z\x”/125 – 65 mm R020931010 – – 2337.006 x 2Z\x”/150 – 65 mm R024931010 – – 2337.008 x 2Z\x” /200 – 65 mm R032931010 – – 2337.00

NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $835.00. Part. No. N-E15-000-004.NOTE: 40”/1016 mm minimum clearance is required for the Vic-Tap II.

† Part C available galvanized. Contact Victaulic for pricing and delivery.


Hole Cut ProductsSE

CTI

ON

3

HO

LE C

UT

PR

Od

UC

TS


Styles 920/920N Mechanical-T Cross

Mechanical-T Cross

STYLE 920/920N *Refer to publication 11.03


10.01 for details.

The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order.STYLES 920/920N MECHANICAL-T CROSS

Nominal Size inches Style

COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket †

Run x BranchNumber Painted Galv. A B

2 x 2 x Z\x x Z\x 920N $152.00 $194.50

Z\x x C\v 920N 174.00 222.50

Z\x x 1 920N 152.00 194.50

Z\x x 1Z\v 920N 174.00 222.50

Z\x x 1Z\x 920N 174.00 222.50

C\v x C\v 920N 152.00 222.50

C\v x 1 920N 152.00 194.50

C\v x 1Z\v 920N 174.00 222.50

C\v x 1Z\x 920N 174.00 222.501 x 1 920N 152.00 194.501 x 1Z\v 920N 174.00 222.501 x 1Z\x 920N 174.00 222.50

1Z\v x 1Z\v 920N 174.00 222.50

1Z\x x 1Z\v 920N 174.00 222.50

1Z\x x 1Z\x 920N 174.00 222.50

2Z\x x 2Z\x x Z\x x Z\x 920N 152.00 194.50

Z\x x C\v 920N 152.00 194.50

Z\x x 1 920N 152.00 194.50

Z\x x 1Z\v 920N 208.00 269.50

Z\x x 1Z\x 920N 208.00 286.50

C\v x C\v 920N 152.00 194.50

C\v x 1 920N 152.00 194.50

C\v x 1Z\v 920N 208.00 269.50

C\v x 1Z\x 920N 208.00 286.501 x 1 920N 152.00 194.501 x 1Z\v 920N 208.00 269.501 x 1Z\x 920N 208.00 269.50

1Z\v x 1 920N 208.00 269.50

1Z\v x 1Z\v 920N 208.00 269.50

1Z\x x 1 920N 208.00 269.50

1Z\x x 1Z\v 920N 208.00 269.50

1Z\x x 1Z\x 920N 208.00 222.503 x 3 x Z\x x Z\x 920N 170.00 219.00

Z\x x C\v 920N 170.00 219.00

Z\x x 1 920N 208.00 260.00

Z\x x 1Z\v § 920N 208.00 260.00

Z\x x 1Z\x § 920N 208.00 260.00

Z\x x 2 § 920N 240.50 298.00

* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 11.03, or contact Victaulic for details.‡ Available grooved only.




3-5

Hole Cut Products


SECTIO

N 3

H

OLE

CUT P

RO

dU

CTS








3 x 3 x C\v x C\v 920N $170.00 $219.00

C\v x 1 920N 208.00 260.00

C\v x 1Z\v 920N 208.00 260.00

C\v x 1Z\x 920N 208.00 260.00

C\v x 2 920N 240.50 298.001 x 1 920N 170.00 219.001 x 1Z\v 920N 208.00 208.001 x 1Z\x 920N 208.00 260.001 x 2 920N 240.50 298.00

1Z\v x 1Z\v § 920N 208.00 260.00

1Z\x x 1Z\v § 920N 208.00 260.00

1Z\x x 1Z\x § 920N 208.00 260.002 x 1Z\v § 920N 240.50 271.002 x 1Z\x 920N 240.50 298.002 x 2 § 920N 240.50 298.00

4 x 4 x Z\x x Z\x 920N 208.00 270.50

Z\x x C\v 920N 208.00 270.50

Z\x x 1 920N 208.00 270.50

Z\x x 1Z\v 920N 252.50 316.50

Z\x x 1Z\x 920N 252.50 316.50

Z\x x 2 920N 270.50 318.50

C\v x C\v 920N 208.00 270.50

C\v x 1 920N 208.00 270.50

C\v x 1Z\v 920N 252.50 316.50

C\v x 1Z\x 920N 252.50 316.50

C\v x 2 920N 270.50 318.501 x 1 920N 208.00 270.501 x 1Z\v 920N 252.50 318.501 x 1Z\x 920N 270.50 316.501 x 2 920N 270.50 318.50

1Z\v x 1Z\v 920N 252.50 316.50

1Z\x x 1Z\v 920N 252.50 316.50

1Z\x x 1Z\x 920N 252.50 316.502 x 1Z\v 920N 270.50 318.502 x 1Z\x 920N 270.50 318.502 x 2 920N 270.50 318.50

2Z\x x 2Z\x 920 270.50 343.003 x 2Z\x 920 281.50 363.503 x 3 920 281.50 363.50






Hole Cut ProductsSE

CTI

ON

3

HO

LE C

UT

PR

Od

UC

TS





5 x 5 x 1Z\x x 1Z\x 920 $309.00 $391.502 x 1Z\x 920 324.50 391.502 x 2 920 309.00 391.50

2Z\x x 1Z\x 920 324.50 414.00

2Z\x x 2 920 324.50 414.00

2Z\x x 2Z\x 920 324.50 414.003 x 1Z\x 920 348.00 446.003 x 2 920 348.00 446.003 x 2Z\x 920 348.00 446.003 x 3 920 348.00 446.00

6 x 6 x 1Z\v ‡ x 1Z\v ‡ 920N 316.00 406.50

1Z\x x 1Z\v ‡ 920N 316.00 406.50

1Z\x x 1Z\x 920N 316.00 406.502 x 1Z\x 920N 316.00 406.502 x 2 920N 329.50 438.50

2Z\x x 2Z\x 920 339.50 438.503 x 2Z\x 920 362.50 464.503 x 3 920 362.50 464.504 x 2Z\x 920 400.50 520.004 x 3 920 400.50 520.004 x 4 920 400.50 520.00

8 x 8 x 2 x 2 920 554.00 699.002Z\x x 2 920 554.00 699.00

2Z\x x 2Z\x 920 554.00 699.003 x 2Z\x 920 583.00 741.503 x 3 920 583.00 741.504 x 2Z\x 920 603.00 779.504 x 3 920 603.00 779.504 x 4 920 603.00 779.50





3-7

Hole Cut Products


SECTIO

N 3

H

OLE

CUT P

RO

dU

CTS


Style 922 Outlet Tee

Outlet Tee



10.01 for details.

STYLE 922 – GRAdE “E” EPdM TYPE A GASkET

Nominal Size inches

Approx. Wgt. Ea.

COMPLETE OUTLET-TEE Grade “E” Type A Gasket

Run x Branch lbPrice Each

Painted Plated1Z\v x Z\x 1.07 $22.00 $41.00

C\v 1.17 22.00 41.001 1.20 22.00 44.50

1Z\x x Z\x 1.15 22.00 41.00

C\v 1.20 22.00 41.001 1.42 22.00 45.50

2 x Z\x 1.30 22.00 45.50

C\v 1.37 22.00 45.501 1.50 23.50 50.50

2Z\x x Z\x 1.40 25.50 50.50

C\v 1.50 25.50 50.501 1.65 25.50 52.50


Style 923 Strapless Outlet

Strapless Outlet


4 – 8”

10” and larger


10.01 for details.

STRAPLESS OUTLET – WITH GRAdE “E” GASkET

Nominal SizeCOMPLETE STRAPLESS OUTLET

With “E” or “T” Gasket *

inchesApprox. Wgt. Per Unit

lbPrice

Per Unit4 – 8 x Z\x NPT IPS 1.9 $240.504 – 8 x C\v NPT IPS 1.6 257.0010 and larger x Z\x NPT IPS 1.9 240.5010 and larger x C\v NPT IPS 1.6 257.00

* Available with Grade “T” Gasket. Contact Victaulic for details.


Hole Cut ProductsSE

CTI

ON

3

HO

LE C

UT

PR

Od

UC

TS








SECTION 4 – Couplings, Spare Parts and Fittings

Couplings, Spare Parts and Fittings



Style 07 Zero-Flex™ Rigid Coupling

Grooved IPS Pipe Couplings

Zero-Flex™ Rigid Coupling

STYLE 07

(with Style 77 gasket)Refer to publication 06.02


10.01 for details.

STYLE 07 – GRAdE “E” OR “T” GASkET OR FLUSH-SEAL™ GASkET

PIPE

Approx. Wgt. Ea.

COUPLING COMPLETE †

With Grade “E” or “T” Gasket


with Flush-Seal “E” or “T” Gasket SPARE PARTS

inches

lb

Price Each Price Each Plated Bolt & NutNom. Size

Outside dia. Painted Galv. Painted Galv. No. *

Size § Inches

1 1.315 1.6 $81.00 $101.50 $114.50 $136.50 2 C\, x 2

1Z\v 1.660 1.6 75.50 95.00 107.50 127.50 2 C\, x 2

1Z\x 1.900 1.6 81.00 101.50 114.50 136.50 2 C\, x 22 2.375 2.3 103.00 129.00 135.50 161.50 2 Z\x x 2Z\x

2Z\x 2.875 2.6 117.00 148.00 162.00 189.50 2 Z\x x 2C\v

3 3.500 3.0 136.00 172.00 171.00 209.50 2 Z\x x 2Z\x

4 4.500 5.3 188.50 242.50 239.00 294.50 2 Z\x x 2C\v

5 5.563 7.4 242.50 316.50 378.00 665.00 2 B\, x 3Z\v

6 6.625 8.3 321.00 415.50 445.00 544.50 2 B\, x 3Z\v

8 8.625 15.1 504.00 655.00 588.00 735.50 2 C\v x 4Z\v

10 10.750 23.5 979.00 1306.00 1176.50 1493.00 2 M\, x 6Z\x

12 12.750 28.2 1093.00 1463.00 1337.50 1719.50 2 M\, x 6Z\x



§ Metric thread size bolts available. Contact Victaulic.

NOTE: See Spare Parts Section for spare part prices.

Style 177N QuickVic Flexible Coupling for Steel

QuickVic™ Flexible Coupling for Steel

STYLE 177NRefer to publication 06.24


10.01 for details.

STYLE 177N – GRAdE “EHP” OR “T” GASkET

PIPEApprox. Wgt. Ea.

COUPLING COMPLETE † With Grade “EHP” or “T” Gasket SPARE PARTS

inches

lb

Price EachGrade “EHP” or

“T” GasketNom. Size

Outside dia. Painted Galv.

2 2.375 3.3 $89.00 $117.00 $69.502Z\x 2.875 3.8 103.50 144.00 75.50

3 3.500 4.3 114.50 158.00 85.504 4.500 7.4 165.00 232.00 114.505 5.563 10.0 263.50 378.00 171.006 6.625 12.8 293.50 420.00 191.008 8.625 20.7 505.00 750.00 229.50



NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.


Couplings, Spare Parts and FittingsSE

CTI

ON

4

CO

UPLI

NG

S, S

PAR

E P

AR

TS A

Nd

FIT

TIN

GS








Style 77 Standard Flexible Coupling

Standard Coupling



10.01 for details.






With Flush-Seal “E” or “T” Gasket SPARE PARTS

inches

lb


Outside dia. Painted Galv. Painted Galv. No.*

Size § Inches

C\v 1.050 1.1 $59.00 $78.50 $91.00 $111.50 2 C\, x 21 1.315 1.2 59.00 78.50 91.00 111.50 2 C\, x 2

1Z\v 1.660 2.0 76.50 101.50 111.50 137.50 2 Z\x x 2Z\x

1Z\x 1.900 2.1 83.00 108.00 116.50 144.00 2 Z\x x 2Z\x

2 2.375 2.6 89.00 117.00 122.00 152.00 2 Z\x x 2Z\x

2Z\x 2.875 3.1 103.50 144.00 148.00 188.00 2 Z\x x 2C\v

3 3.500 3.7 114.50 158.00 152.50 197.50 2 Z\x x 2C\v

3Z\x 4.000 5.6 164.00 229.00 219.50 288.00 2 B\, x 3Z\v

4 4.500 6.7 165.00 232.00 220.00 288.00 2 B\, x 3Z\v

5 5.563 10.6 248.00 356.00 383.00 497.00 2 C\v x 4Z\v

6 6.625 12.0 293.50 420.00 425.50 557.50 2 C\v x 4Z\v

8 8.625 20.8 476.00 707.00 573.00 785.00 2 M\, x 510 10.750 27.8 775.00 1109.50 919.00 1235.00 2 1 x 612 12.750 31.1 880.50 1260.00 1079.50 1420.50 2 1 x 6Z\x

* Number of bolts equals number of segments supplied.





Style 75 Flexible Coupling

Flexible Coupling



10.01 for details.






With Flush-Seal “E” or “T” Gasket SPARE PARTS

inches

lb


Outside dia. Painted Galv. Painted Galv.

Size § Inches

1 1.315 1.3 $59.50 $73.50 $93.50 $110.00 C\, x 2

1Z\v 1.660 1.4 60.50 78.50 98.00 116.50 C\, x 2

1Z\x 1.900 1.5 73.50 91.00 106.50 127.00 C\, x 22 2.375 1.7 89.00 117.00 110.00 131.00 C\, x 2

2Z\x 2.875 1.9 103.50 144.00 131.00 154.50 C\, x 23 3.500 2.9 114.50 158.00 138.00 166.00 Z\x x 2C\v

4 4.500 4.1 165.00 232.00 196.50 240.50 Z\x x 2C\v

5 5.563 5.8 248.00 356.00 333.50 397.00 B\, x 3Z\v

6 6.625 7.0 293.50 420.00 368.50 446.50 B\, x 3Z\v

8 8.625 12.4 476.00 707.00 611.50 733.00 C\v x 4Z\v





4-3



SECTIO

N 4

C

OU

PLIN

GS, S

PAR

E PA

RTS

AN

d FITTIN

GS








Style 750 Reducing Coupling

Reducing Coupling



10.01 for details.

STYLE 750 – GRAdE “E” OR “T” GASkET


COUPLING COMPLETE † With Grade “E” or “T” Gasket

SPARE PARTS

Nominal Size

lb

Price EachPlated Bolt &

Nut

inches Painted Galv.Size § Inches

2 x 1 2.0 $145.50 $175.00 C\, x 2

1Z\x 2.0 117.50 142.00 C\, x 2

2Z\x x 2 2.9 152.00 189.50 C\, x 23 x 2 4.6 172.00 218.00 Z\x x 2C\v

2Z\x 4.1 150.00 189.50 Z\x x 2C\v

4 x 2 8.8 272.00 342.00 B\, x 3Z\v

2Z\x 8.3 244.00 321.00 B\, x 3Z\v

3 6.4 229.00 295.00 B\, x 3Z\v

5 x 4 10.8 307.00 401.50 C\v x 4Z\v

6 x 4 16.1 461.50 580.50 C\v x 4Z\v

5 12.6 405.00 524.00 C\v x 4Z\v

8 x 6 22.3 688.50 871.00 M\, x 510 x 8 32.3 883.00 1118.00 1 x 6




NOTE: Support rings required on vertical installations. Please specify on order.




CTI

ON

4

CO

UPLI

NG

S, S

PAR

E P

AR

TS A

Nd

FIT

TIN

GS





Lubricant

Lubricant LUBRICANT Price EachPACK With 12 Tubes – 4 Fluid Ounces/120 ml Each $432.50

CONTAINER One Quart – 32 Fluid Ounces/960 ml Each 189.00


To ensure easy assembly and service of all your Victaulic installations including HDPE, be sure to include plenty of Victaulic Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold.

LUBRICANT USAGE GUIdESize of Gasket inches

Number of Gaskets Size of Gasket inches

Number of Gaskets Size of Gasket inches

Number of Gaskets

Per Tube Per Quart Per Tube Per Quart Per Tube Per Quart2 140 1120 8 31 252 16 11 863 97 773 10 25 202 18 10 764 71 558 12 21 171 20 9 696 49 383 14 12 98 24 7 57

Gaskets

Gaskets GASkETS FOR STYLES 07, 75, 77 COUPLINGS

Nom. Size Standard Gaskets

inches

Grade “E” EPdM or Grade “T”

NitrileFlush-Seal

Grade “E” or “T”C\v $43.00 $80.001 43.00 80.00

1Z\v 46.00 84.50

1Z\x 48.00 85.502 48.00 88.00

2Z\x 56.50 106.503 60.50 106.50

3Z\x 75.50 137.505 97.50 250.506 104.50 256.508 142.50 264.50

10 178.00 341.0012 207.50 405.50


4-5



SECTIO

N 4

C

OU

PLIN

GS, S

PAR

E PA

RTS

AN

d FITTIN

GS


SILICONE GASkETS FOR STYLES 07, 75, 77 COUPLINGS

Nom. Size inches

Grade “L” Silicone

C\v $148.501 148.50

1Z\v 212.501Z\x 222.00

2 137.502Z\x 159.00

3 171.503Z\x 225.00

4 249.004Z\x +

5 487.506 534.508 597.00

10 775.0012 915.00



Gaskets

NOTE: For pricing couplings complete with any special gaskets - take the standard cou-pling price with Grade “E” or “T” gasket complete (Victaulic Main Price List), sub-tract the standard gasket price, then add on the price of the special gasket. Gasket guidelines can be found in the latest Victaulic Gasket Selection Guide (publica-tion 05.01). This information is general in scope and Victaulic should be consulted for guidelines when a question arises.

STANdARd “E” OR “T” GASkETS FOR STYLE 750

Nom. Size Price Eachinches Grade “E” or “T”

2 x 1 $46.001Z\x 46.00

2Z\x x 2 59.003 x 2 66.50

2Z\x 66.504 x 2 76.50

2Z\x 78.003 80.00

5 x 4 93.006 x 4 105.00

5 114.508 x 6 127.00

10 x 8 152.50


Metal Liners

Metal Liners

STYLES 77 ANd 75 COUPLINGS

(Type 304 Stainless Steel)

STYLES 77 ANd 75 COUPLINGS

Nom. Size inches Price Each

2 +2Z\x +

3 +4 +5 +6 +8 +

10 +

Nom. Size inches Price Each

12 +14 +16 +18 +20 +24 +





CTI

ON

4

CO

UPLI

NG

S, S

PAR

E P

AR

TS A

Nd

FIT

TIN

GS


Plated Trackhead Bolts and Nuts

Plated Trackhead Bolts and Nuts

PLATEd TRACkHEAd BOLTS ANd NUTS

Bolt and Nut Size

inches Price EachC\, x 2 $22.50Z\x x 2Z\x 24.00

2C\v 24.003 24.00

3Z\v 24.00B\, x 2C\v 27.50

3Z\v 27.503Z\x 29.00

4 36.505 46.00

C\v x 4Z\v 32.005 42.50

M\, x 5 56.005Z\x 63.506Z\x 69.50

Bolt and Nut Size

inches Price Each1 x 3Z\x $60.50

5 56.505Z\x 69.50

6 69.506Z\x 73.50

1Z\, x 4 93.505Z\x 93.50

1Z\v x 3Z\x 93.505Z\x 271.00

1C\, x 5C\v 315.001Z\x x 4Z\x 299.50

5C\v 337.501C\v x 6 589.001M\, x 6 779.50


Go-No-Go Pipe Tape

Go-No-Go Tape Tool Model Part Number Purchase PricePT-100-A Imperial Go/No-Go Grooved Pipe Diameter Tape Each RW75-100-MCH $86.50

Box of 6 RW75-100-KIT 469.50


* Each box contains 6 Go-No-Go Tapes.

# Tool discount applies.

4-7



SECTIO

N 4

C

OU

PLIN

GS, S

PAR

E PA

RTS

AN

d FITTIN

GS


Elbows –No. 12 - 22Z\x°, No. 13 - 11Z\v°

Grooved IPS Pipe Fittings

ElbowsRefer to publication 07.01

No. 12 Standard & Gooseneck

No. 13


10.01 for details.

ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW

Nom. Size 22Z\x° Elbow No. 12 11Z\v° Elbow No. 13

inches

Approx. Wgt. Ea.

lbC - E inches


lbC - E inches

Price Each

Painted Galv. Painted Galv.1 0.6 ‡ 3.25 $653.00 $674.50 0.3 (sw) 1.38 $261.00 +

1Z\v 0.8 1.75 114.00 144.00 0.5 1.38 114.00 $144.00

1Z\x 0.8 1.75 114.00 144.00 0.5 1.38 114.00 144.002 1.4 ‡ 3.75 114.00 144.00 1.0 1.38 114.00 144.00

2Z\x 2.3 ‡ 4.00 114.00 144.00 1.5 1.50 114.00 144.003 3.1 ‡ 4.50 164.00 205.00 2.1 1.50 164.00 203.00

3Z\x 4.0 (sw) 2.50 380.00 507.50 2.7 (sw) 1.75 380.00 448.504 5.6 2.88 215.50 279.00 3.6 1.75 199.50 264.005 7.8 (sw) 2.88 656.00 791.00 5.0 (sw) 2.00 656.00 771.506 12.2 ‡ 6.25 601.00 764.50 7.0 2.00 601.00 725.508 20.0 ‡ 7.75 1249.50 1552.50 10.1 2.00 1068.50 1269.00

10 30.0 4.38 1648.50 2141.00 11.8 2.13 1539.50 1837.0012 40.0 4.88 2227.50 2762.00 29.3 2.25 2227.50 2697.50




‡ Gooseneck design.

No. 100 and No. 110 1Z\x D Long Radius Elbows

Long Radius - 1Z\x D ElbowsRefer to publication 07.01

No. 100

No. 110


10.01 for details.

LONG RAdIUS – 90° LONG RAdIUS ELBOW OR 45° LONG RAdIUS ELBOW

Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *

inches

Approx. Wgt. Ea.

lbC - E inches


lbC - E inches

Price Each

Painted Galv. Painted Galv.2 2.5 4.38 $235.50 $308.50 1.8 2.75 $205.00 $258.50

2Z\x 3.4 5.13 294.50 338.00 2.8 3.00 651.00 732.003 6.0 5.88 235.50 308.50 4.9 3.38 205.00 258.504 12.3 7.50 349.50 467.00 7.3 4.00 248.00 329.505 18.0 9.25 1768.00 2026.50 14.8 (sw) 4.88 1643.00 1803.006 30.4 10.75 1012.50 1329.50 17.4 5.50 726.50 931.008 66.0 14.25 2418.00 3091.00 36.0 7.25 1262.50 1641.00

10 107.0 15.00 2781.00 3476.50 57.0 6.25 1704.00 2130.5012 156.0 18.00 3060.00 3824.50 90.0 7.50 2301.50 2877.00





CTI

ON

4

CO

UPLI

NG

S, S

PAR

E P

AR

TS A

Nd

FIT

TIN

GS








No. 29M Tee with Threaded Branch

TeeRefer to publication 07.01

No. 29M


10.01 for details.

TEE WITH THREAdEd BRANCH

Nom. SizeApprox. Wgt. Ea.

Tee with Male Threaded

Branch No. 29M

inches lbPrice Each

Painted Galv.C\v 0.6 $411.50 $462.001 1.0 – –

1Z\v 1.5 337.00 395.00

1Z\x 2.0 524.00 617.002 3.0 337.00 395.00

3Z\x 7.9 (sw) + +4 11.3 694.50 954.505 17.8 1993.00 +6 25.7 1779.50 2094.508 47.6 + +

10 99.0 + +12 133.0 + +




No. 35 Cross, No. 33 True Y

Cross and WyeRefer to publication 07.01

No. 35

No. 33


10.01 for details.

CROSS ANd WYE – STEEL CROSS OR STEEL 90 TRUE Y

Nom. SizeSteel Cross

No. 35Steel 90 True Wye

No. 33

inches

Approx. Wgt. Ea.

lb


lb

Price Each

Painted Galv. Painted Galv.C\v 0.9 + + 0.7 + +1 1.3 $387.50 $446.50 1.1 $592.50 +

1Z\v 2.1 465.50 542.00 1.5 592.50 +

1Z\x 2.5 501.50 581.50 1.8 592.50 $705.502 3.8 286.50 341.50 2.5 592.50 705.50

2Z\x 6.1 286.50 341.50 4.3 592.50 705.503 10.5 509.50 623.00 6.1 708.00 842.00

3Z\x 11.5 1022.50 1218.50 9.6 + +4 15.8 843.50 1038.00 9.8 928.00 1115.00

4Z\x 18.5 + + – – –5 20.0 1719.00 2070.50 15.0 1327.00 1593.006 28.0 2204.50 2676.50 22.3 1637.50 1995.008 48.0 2904.00 3592.50 36.0 2358.00 2897.50

10 121.5 4763.50 5892.50 69.9 3915.00 4795.5012 110.0 6874.50 8563.00 80.0 4324.00 5469.00



4-9



SECTIO

N 4

C

OU

PLIN

GS, S

PAR

E PA

RTS

AN

d FITTIN

GS








No(s). 40, 42, and 43 Adapter Nipples

Adapter Nipples ‡

Same prices apply for: No. 40 Grooved x Threaded No. 42 Grooved x Beveled No. 43 Grooved x GroovedRefer to publication 07.01

No. 40

No. 42

No. 43

AdAPTER NIPPLES – GROOVEd x THREAdEd, GROOVEd x BEVELEd, OR GROOVEd x GROOVEd

Nom. Size Price Per Length – inchesinches 3 4 6 8 10 12

C\v $63.50 $63.50 + + + +1 63.50 63.50 $100.00 + + +

1Z\v 63.50 63.50 100.00 + + +

1Z\x 63.50 63.50 100.00 $115.50 $132.00 $151.00 2 63.50 63.50 100.00 115.50 132.00 151.00

2Z\x 73.50 73.50 133.00 133.00 155.50 176.50 3 89.00 89.00 143.50 171.50 200.50 228.50 4 145.00 145.00 145.00 237.00 279.00 321.00 5 297.00* 297.00* 297.00 413.00 509.50 586.00 6 380.50 380.50* 380.50* 492.00 570.50 648.00 8 426.50* 426.50* 426.50* 566.50 777.50 872.00

10 550.50* 550.50* 554.00* 597.00 919.00 1093.00 12 747.50* 747.50* 705.00* 747.50 1163.00 1385.50

Special lengths not shown, heavier wall thickness, electroplated and galvanized nipples are priced on application.GALVANIZED AND EXTRA HEAVY ARE NON-CANCELLABLE AND NON-RETURNABLE ITEMS.‡ Contact Victaulic for pricing on seamless adapter nipples.

NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.

Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6” and smaller are made from Schedule 40 pipe; for nominal sizes 8” and larger, from Schedule 30 pipe. NOTE: For Pump Package Nipples with 1 Z\x” hole cut to receive Style 923 Strapless Outlet or Style 924 Thermometer Outlet add $149.00 to No. 40, 42 or 43 Nipple prices and request No. 40-H, 42-H or 43-H on order. No. 40-H, 42-H and 43-H are non-cancellable and non-returnable.* These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved.


No. 80 Female Threaded Adapter

Female Threaded AdapterRefer to publication 07.01

No. 80

FEMALE THREAdEd AdAPTER

Nom. SizeApprox.

Wgt. EachNo. 80

Price Eachinches lb Painted Galv.

C\v 1.0 $534.50 $591.501 1.0 572.50 614.50

1Z\v 1.5 (sw) 303.00 339.50

1Z\x 1.5 (sw) 392.00 418.002 1.4 186.50 218.00

2Z\x 1.5 186.50 218.003 2.9 215.50 263.004 4.5 329.00 412.00


Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.




CTI

ON

4

CO

UPLI

NG

S, S

PAR

E P

AR

TS A

Nd

FIT

TIN

GS




No(s). 18 and 19 Adapter Elbows

Adapter ElbowsRefer to publication 07.01

No. 18

No. 19


10.01 for details.

AdAPTER ELBOWS – 90° AdAPTER ELBOW OR 45° AdAPTER ELBOW

Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19

inches

Approx. Wgt. Ea.

lb


lb

Price Each

Painted Galv. Painted Galv.C\v 0.5 $267.50 $284.00 0.5 $272.00 $288.001 0.5 179.50 222.00 0.6 – –

1Z\v 0.9 200.50 222.00 0.6 – –

1Z\x 1.1 255.00 296.00 0.9 294.50 314.502 2.5 179.50 222.00 1.9 – –

2Z\x 3.0 310.50 339.50 2.3 303.00 312.503 5.8 288.00 352.50 5.0 515.50 553.506 17.6 888.00 1122.50 12.7 1080.00 1200.50



4-11



SECTIO

N 4

C

OU

PLIN

GS, S

PAR

E PA

RTS

AN

d FITTIN

GS





No. 25 Grooved Reducing Tee

Reducing TeeRefer to publication 07.01

No. 25


10.01 for details.

REdUCING TEE

Size Reducing Tee No. 25inches Approx.

Wgt. Each lb

Price Each

Run x Branch Painted Galv.1 x 1 x C\v (sw) 1.0 $274.00 $322.00

1Z\v x 1Z\v x 1 (sw) 1.3 284.50 322.00

1Z\x x 1Z\x x C\v (sw) 1.5 286.50 394.001 (sw) 1.5 394.00 405.50

1Z\v (sw) 1.7 299.00 330.502 x 2 x C\v 2.5 371.00 437.00

1 2.7 339.50 397.001Z\v (sw) 1.8 423.00 444.50

1Z\x 3.0 339.50 403.00

2Z\x x 2Z\x x C\v (sw) 3.9 457.00 495.001 3.8 339.50 397.00

1Z\v 4.2 510.50 601.00

1Z\x 3.9 339.50 403.002 4.5 339.50 403.00

3 x 3 x C\v (sw) 5.7 526.50 548.501 6.1 299.50 381.50

1Z\v 8.0 419.50 554.50

1Z\x 6.5 299.50 386.002 6.2 299.50 386.00

2Z\x 6.6 299.50 386.004 x 4 x C\v (sw) 8.0 673.00 718.50

1 7.8 403.00 503.001Z\v (sw) 9.6 791.00 921.50

1Z\x 10.2 403.00 503.002 11.2 403.00 528.00

2Z\x 11.4 403.00 528.003 11.6 403.00 528.00

5 x 5 x 1 (sw) 14.0 886.00 1090.501Z\x (sw) 14.3 1125.50 1218.50

2 (sw) 14.5 974.50 1204.002Z\x 15.2 794.50 1000.00

3 16.6 794.50 1000.004 16.7 859.50 1086.00

6 x 6 x 1 (sw) 23.0 1068.50 1310.001Z\x (sw) 24.0 1104.00 1511.00

2 21.6 946.50 1242.502Z\x 21.4 946.50 1242.50

3 26.5 946.50 1242.504 25.0 946.50 1242.505 23.2 946.50 1249.50

8 x 8 x 1Z\x (sw) 33.0 1363.50 1659.002 (sw) 33.5 1363.50 1721.00

2Z\x (sw) 39.0 1363.50 1721.003 33.6 1469.00 1754.00






CTI

ON

4

CO

UPLI

NG

S, S

PAR

E P

AR

TS A

Nd

FIT

TIN

GS





Size Reducing Tee No. 25inches Approx.

Wgt. Each lb

Price Each

Run x Branch Painted Galv.8 x 8 x 4 41.8 $1969.50 $2545.00

5 (sw) 34.0 1969.50 2562.006 42.3 1969.50 2573.00

10 x 10 x 1Z\x (sw) 62.0 1973.50 2585.502 (sw) 62.0 2005.50 2585.50

2Z\x (sw) 62.4 2037.00 2585.503 (sw) 60.0 2068.50 2607.004 (sw) 61.0 2100.50 2625.005 (sw) 52.0 2131.50 2664.50

6 59.0 2163.00 2704.508 (sw) 64.7 2194.50 2743.50

12 x 12 x 1 (sw) 77.0 2198.00 2752.50 2 (sw) 80.0 2219.50 2760.50

2Z\x (sw) 78.0 2242.50 2769.003 (sw) 82.0 2265.00 2778.004 (sw) 80.0 2288.00 2786.505 (sw) 75.0 2310.50 2795.006 (sw) 75.0 2333.00 2803.508 (sw) 80.0 2603.50 3128.00

10 (sw) 84.0 2749.50 3322.50




4-13



SECTIO

N 4

C

OU

PLIN

GS, S

PAR

E PA

RTS

AN

d FITTIN

GS


No. 29T Threaded Reducing Tee

Reducing Tee with Threaded BranchRefer to publication 07.01

No. 29T


10.01 for details.

REdUCING TEE WITH THREAdEd BRANCH

Size Reducing Tee No. 29T with Threaded Branchinches Approx. Wgt. Each

lbPrice Each

Run x Branch Painted Galv.1 x 1 x C\v (sw) 1.0 + +

1Z\v x 1Z\v x 1 (sw) 1.3 + +

1Z\x x 1Z\x x C\v (sw) 1.5 + +1 (sw) 1.5 + +

1Z\v (sw) 1.7 + +2 x 2 x C\v 2.5 $703.00 $461.50

1 2.7 358.50 419.501Z\v (sw) 2.9 601.50 643.00

1Z\x 3.0 358.50 425.50

2Z\x x 2Z\x x C\v (sw) 3.5 703.00 724.501 3.8 358.50 419.50

1Z\v 3.8 780.50 802.00

1Z\x 3.9 358.50 425.502 4.5 358.50 429.00

3 x 3 x C\v (sw) 5.9 655.50 695.501 6.1 358.50 447.50

1Z\v 6.3 880.50 936.50

1Z\x 6.5 358.50 450.002 6.2 358.50 450.00

2Z\x (sw) 6.4 860.50 931.504 x 4 x C\v (sw) 7.2 950.50 1170.50

1 7.8 447.50 550.501Z\v (sw) 8.5 917.50 988.50

1Z\x 9.2 447.50 560.002 11.2 447.50 560.00

2Z\x 11.4 447.50 576.503 11.6 447.50 578.00

5 x 5 x 2 (sw) 14.5 955.00 1041.002Z\x 15.2 858.50 1087.00

3 (sw) 16.6 794.50 1000.004 (sw) 16.7 858.50 1170.50

6 x 6 x 1 (sw) 23.0 1302.00 1513.501Z\x (sw) 25.0 1152.50 1449.50

2 21.6 1114.50 1387.002Z\x 21.4 1114.50 1387.00

3 26.5 1114.50 1387.004 (sw) 25.0 1407.50 1513.505 (sw) 23.2 1114.50 1387.00

8 x 8 x 2 (sw) 33.5 1363.50 1880.003 (sw) 33.6 1880.00 2437.504 (sw) 41.8 1969.50 2545.005 (sw) 34.0 1969.50 2560.506 (sw) 42.3 2179.00 2992.50







CTI

ON

4

CO

UPLI

NG

S, S

PAR

E P

AR

TS A

Nd

FIT

TIN

GS





No. 29T Threaded Reducing Tee

Reducing Tee with Threaded BranchRefer to publication 07.01

No. 29T


10.01 for details.

REdUCING TEE WITH THREAdEd BRANCH

Size Reducing Tee No. 29T with Threaded Branchinches Approx. Wgt. Each

lbPrice Each

Run x Branch Painted Galv.10 x 10 x 2 (sw) 62.0 $2283.50 $3335.50

3 (sw) 60.0 2283.50 2832.504 (sw) 61.0 2389.00 3053.005 (sw) 52.0 2100.50 3116.506 (sw) 59.0 2441.50 3157.508 (sw) 64.7 3292.00 3680.00

12 x 12 x 3 (sw) 80.0 3075.00 3969.504 (sw) 82.0 3295.00 4231.005 (sw) 75.0 3483.00 4523.506 (sw) 75.0 3525.00 4566.008 (sw) 80.0 3624.00 4671.50

10 (sw) 84.0 3793.00 4679.00




4-15



SECTIO

N 4

C

OU

PLIN

GS, S

PAR

E PA

RTS

AN

d FITTIN

GS





No. 50 Concentrc Reducers, No. 51 Eccentric Reducers

ReducersRefer to publication 07.01

No. 50

No. 51


10.01 for details.

REdUCERS – CONCENTRIC OR ECCENTRIC *

Size Concentric Reducer No. 50 Eccentric Reducer No. 51

inches

Approx. Wgt. Ea.

lb


lb

Price Each

Painted Galv. Painted Galv.1Z\v x C\v 1.9 $465.50 $510.50 3.2 + +

1 1.9 487.00 535.50 3.2 + +1Z\x x C\v 1.4 548.00 592.00 4.5 + +

1 0.8 122.50 143.50 4.5 (sw) $475.00 $601.501Z\v 1.0 122.50 143.50 4.5 502.50 628.00

2 x C\v 0.9 122.50 143.50 2.0 (sw) 566.50 +1 0.7 122.50 143.50 2.3 (sw) 566.50 601.00

1Z\v 1.2 133.00 156.50 4.6 (sw) 618.50 +

1Z\x 1.0 122.50 143.50 1.1 127.00 150.50

2Z\x x C\v 1.3 953.50 1028.50 3.3 1431.50 1613.001 1.1 165.50 190.00 3.5 1333.00 1476.00

1Z\v 3.3 122.50 143.50 1.4 136.00 157.00

1Z\x 3.6 122.50 143.50 3.7 (sw) 617.50 705.502 3.9 122.50 143.50 4.3 253.00 343.00

3 x C\v 1.5 958.50 1072.00 4.5 + +1 1.3 133.00 162.00 4.8 (sw) 1430.50 1574.00

1Z\v 1.4 212.50 244.50 4.8 1295.50 +

1Z\x 5.1 146.50 178.00 5.1 (sw) 713.00 832.502 1.6 108.00 131.50 6.0 289.00 394.00

2Z\x 1.8 146.50 177.00 7.0 289.00 403.00

3Z\x x 3 2.0 156.00 188.00 7.0 (sw) 1571.00 +4 x 1 3.0 161.50 197.50 6.5 (sw) 2894.00 +

1Z\v 4.6 1225.00 1373.50 – – –

1Z\x 2.6 222.00 293.00 8.1 (sw) 1751.50 1891.502 2.4 143.50 176.00 3.3 352.00 490.50

2Z\x 2.7 177.00 215.00 3.4 352.00 490.503 3.2 177.00 215.00 3.5 352.00 490.50

3Z\x 2.9 177.00 215.00 8.0 (sw) 2450.00 +5 x 2 9.0 (sw) 1723.00 1903.50 5.2 (sw) 1931.50 +

2Z\x 4.3 358.50 436.50 10.8 (sw) 1645.50 +3 5.0 205.00 253.00 11.1 (sw) 1591.00 1772.504 4.3 243.50 304.00 12.0 477.00 673.00






CTI

ON

4

CO

UPLI

NG

S, S

PAR

E P

AR

TS A

Nd

FIT

TIN

GS





Size Concentric Reducer No. 50 Eccentric Reducer No. 51

inches

Approx. Wgt. Ea.

lb


lb

Price Each

Painted Galv. Painted Galv.6 x 1 5.0 $322.00 $401.00 14.5 (sw) $2997.00 $3255.00

1Z\x 5.5 + + + 2905.50 +2 6.6 322.00 401.00 14.5 (sw) 2735.00 2978.00

2Z\x 6.4 358.50 439.50 14.2 (sw) 3255.00 3543.503 6.4 322.00 401.00 15.0 633.00 888.004 6.5 282.50 363.50 17.0 555.00 814.505 6.4 415.50 514.50 17.0 665.50 942.50

8 x 3 9.3 572.50 713.00 22.0 (sw) 3175.50 3458.504 10.4 572.50 716.50 23.0 (sw) 2777.50 3168.505 11.6 572.50 720.50 23.0 (sw) 2777.50 3168.506 11.9 726.00 909.00 24.0 1119.00 1522.50

10 x 4 19.7 1301.50 1603.00 32.0 (sw) 4902.50 5879.005 33.0 2863.00 3266.50 34.6 4617.50 5434.006 20.0 1424.50 1775.00 36.9 (sw) 3483.00 4128.508 22.0 1424.50 1805.00 21.6 2949.50 3667.00

12 x 4 44.0 6228.50 7413.00 48.0 (sw) 5149.00 6056.506 24.6 1698.50 2098.00 50.0 (sw) 4652.00 5603.008 52.0 2546.00 3006.00 53.5 (sw) 4534.50 5424.50

10 39.0 2546.00 3151.50 57.0 (sw) 4060.00 4814.00




4-17



SECTIO

N 4

C

OU

PLIN

GS, S

PAR

E PA

RTS

AN

d FITTIN

GS


No. 52 Reducer – Male Threaded Small End

Reducer - Male Threaded Small EndRefer to publication 07.01

No. 52


10.01 for details.

REdUCER – MALE THREAdEd SMALL ENd

Nominal Size

Approx. Wgt. Ea. Price Each

inches Inlet x Outlet lb Painted Galv.

1Z\x x 1 0.8 $127.00 $156.001Z\v 0.9 133.00 156.50

2 x C\v 0.9 127.00 156.001 0.7 127.00 156.00

1Z\v 1.2 127.00 156.00

1Z\x 1.0 127.00 156.00

2Z\x x 1 1.1 171.00 197.001Z\v 1.2 179.50 220.50

1Z\x 1.3 188.00 220.502 1.4 127.00 156.00

3 x C\v 1.5 (sw) 903.00 961.001 1.3 138.00 166.00

1Z\x 1.5 156.00 186.502 1.5 156.00 186.50

2Z\x 2.4 188.00 220.504 x 1 2.3 177.50 215.00

1Z\x 2.7 413.50 540.502 2.6 189.00 226.00

2Z\x 2.6 189.50 232.503 2.5 232.00 273.50

5 x 4 4.5 1307.00 1421.506 x 1 5.5 358.50 439.50

2 5.7 358.50 439.502Z\x 5.8 358.50 439.50

3 5.8 358.50 439.504 6.5 (sw) 2145.50 2376.005 2.0 (sw) 3349.00 +







CTI

ON

4

CO

UPLI

NG

S, S

PAR

E P

AR

TS A

Nd

FIT

TIN

GS





SECTION 5 – VicFlex™ Sprinkler Fitting Systems

VicFlex™ Sprinkler Fitting Systems



Series AH1 VicFlex™ Hose

Series AH1 HoseRefer to publication 10.85

Braided AH1 Hose

Size Approx. Wgt. Ea. Victaulic BoxPrice Eachinches lb Part No. Quantity

31 x Z\x 2.4 A31HAQBBA1 10 $65.50C\v 2.4 A31TAQBBA1 10 65.50

36 x Z\x 2.6 A36HAQBBA1 10 70.00C\v 2.6 A36TAQBBA1 10 70.00





Series AH1-CC

Series AH1-CCRefer to publication 10.95

Braided AH1-CC Hose

SizeApprox. Wgt.

Ea. Box Victaulic Price Each Victaulic Price Each

inches lb Quantity Part No.Painted Coupling Part No.

Galv. Coupling

31 x Z\x 2.9 10 A31HAQBP1C $76.00 A31HAQBG1C $87.00

C\v 2.9 10 A31TAQBP1C 76.00 A31TAQBG1C 87.0036 x Z\x 3.1 10 A36HAQBP1C 80.50 A36HAQBG1C 91.50




C\v 4.6 10 A72TAQBP1C 107.50 A72TAQBG1C 118.50




Braided AH2 Hose


31 x Z\x 2.8 A31HAQFBA2 10 $88.50C\v 2.8 A31TAQFBA2 10 88.50

36 x Z\x 3.1 A36HAQFBA2 10 93.50C\v 3.1 A36TAQFBA2 10 93.50






VicFlex™ Sprinkler Fitting Systems SE

CTI

ON

5

VICFL

Ex™

SPR

INk

LER

FIT

TIN

G S

YSTE

MS





Series AH2-CC

Braided AH2-CC HoseRefer to publication 10.85

SizeApprox. Wgt.

Ea. Box Victaulic Price Each Victaulic Price Each

inches lb Quantity Part No.Painted Coupling Part No.

Galv. Coupling

31 x Z\x 3.3 10 A31HAQBP2C $98.00 A31HAQBG2C $109.00





C\v 5.7 10 A72TAQBP2C 129.50 A72TAQBG2C 140.50


Series AH2-300 VicFlex™ Hose

Series AH2-300 Hose

FM Approved up to 300 psiRefer to publication 10.84

Braided AH2-300 Hose


31 x Z\x 2.8 A31HAQB300 10 $97.50C\v 2.8 A31TAQB300 10 97.50

36 x Z\x 3.1 A36HAQB300 10 102.00C\v 3.1 A36TAQB300 10 102.00





Series AH2-CC

5-3



SECTIO

N 5

VIC

FLEx™

SPR

INk

LER FITTIN

G SYS

TEMS






Unbraided AH5 Hose


31 x Z\x 1.8 A31HAQFBUE 10 $58.50C\v 2.1 A31TAQFBUE 10 58.50

48 x Z\x 1.9 A48HAQFBUE 10 68.00C\v 2.8 A48TAQFBUE 10 68.00

60 x Z\x 2.3 A60HAQFBUE 10 80.00C\v 3 A60TAQFBUE 10 80.00

72 x Z\x 2.8 A72HAQFBUE 10 91.50C\v 3.4 A72TAQFBUE 10 91.50


VicFlex™ Brackets

VicFlex™ BracketsBrackets Size

Approx. Wgt. Ea. Victaulic Box Price

description inches lb Part No. Quantity EachStyle AB1 24 1.8 A240AB1ADJ 10 $23.00For suspended ceilings – allows installation before ceiling tiles in place 48 2.6 A480AB1ADJ 10 30.00

Style AB2 24 1.8 A240AB2000 10 23.00For suspended ceilings – allows installation before ceiling tile is in place; and hard-lid ceilings – allows for vertical sprinkler adjustment

48 2.7 A480AB2000 10 30.00

Style AB3– 0.3 A000AQFINB 10 9.50Surface mount applications, wood, metal and

block wallsStyle AB4 24 1.5 A240AB4000 10 30.00For hard-lid ceilings with hat furring channel grid systems – allows for vertical sprinkler adjustment 48 2.2 A480AB4000 10 38.50

Style AB5 24 1.6 A240AB5000 10 23.00For hard-lid ceilings; allows for vertical sprinkler adjustment 48 2.3 A480AB5000 10 30.00

Style AB7 24 1.4 A000AQFBEE 10 15.00For suspended ceilings 48 1.9 A000AQFB48 10 23.00Style AB7 Adjustable 24 1.5 A275AQFADJ 10 15.50For suspended ceilings 48 2.0 A551AQFADJ 10 22.50Style AB10

6 1.1 A06AB100TZ 10 30.50For Armstrong® Techzone™ CeilingsStyle AB11 24 1.5 A240B11000 10 23.00For lay-in panel suspended t-grid ceilings or drywall suspended t-grid ceilings, allows for low profile installations (for use only with specific low profile elbows found in the accessories section)

48 2.7 A480B11000 10 30.00

Style AB12

– 0.4 A040AQBB12 10 10.00For suspended and hard-lid ceilings, allows for vertical sprinkler adjustment, and allows for low profile installation down to 4” | 100 mm




CTI

ON

5

VICFL

Ex™

SPR

INk

LER

FIT

TIN

G S

YSTE

MS



VicFlex™ Reducers and End Fittings

VicFlex™ Reducers and End Fittings End Fittings and Parts Outlet Size


description inches lb Part No. Quantity Each

Reducing Nipple – 5C\v”/140 mm Length

Z\x 0.7 A004AQBRNH 10 $17.50C\v 0.7 A006AQBRNT 10 17.50

Reducing Nipple – 9”/229 mm Length

Z\x 1.6 A090AQFRNH 10 25.00C\v 1.7 A090AQFRNT 10 25.00

Reducing Nipple – 13”/330 mm Length

Z\x 2.3 A130AQFRNH 10 33.00C\v 2.3 A130AQFRNT 10 33.00

90° Reducing Elbow – 4”/102 mm Length

Z\x 0.9 A000AQFRE4 10 31.50C\v 1.0 A000AQFRE6 10 31.50

90° Reducing Elbow – 6”/152 mm Length

Z\x 0.9 A000AQFRE5 10 31.50C\v 1.2 A000AQFRE7 10 31.50

Low Profile Long 90° Reducing Elbow – Recessed Sprinkler *

Z\x 1.0 A004AQB00L 10 46.00C\v 1.0 A006AQB00L 10 46.00

Low Profile Short 90° Reducing Elbow – Concealed Sprinkler *

Z\x 0.7 A004AQB000 10 46.00C\v 0.7 A006AQB000 10 46.00


* For use with Style AB11 or AB12 Low Profile bracket

VicFlex™ Preassembled System Order Form

5-5



SECTIO

N 5

VIC

FLEx™

SPR

INk

LER FITTIN

G SYS

TEMS


VicFlex™ Preassembled System Order FormBi

llTo

:Sh

ip To:

Tag

Emai

lPh

one

No.

Fax

No.

Stat

e/Pr

ovin

ce

Com

pany

Nam

e

Addr

ess

Ord

er N

o.

Com

pany

Nam

e

Addr

ess

Stat

e

Zip

Code

/Pos

tal C

ode

Zip

Code

Dat

e

Sprin

kler

Fr

ame

Sprin

kler

Sele

ctio

nHo

se/B

rack

et Se

lect

ion

Sprin

kler

Thre

adSp

rinkl

erFi

nish

Defle

ctor

St

yle

*Sp

rinkl

erRe

spon

seSp

rinkl

erK-

Fact

orSp

rinkl

erTe

mpe

ratu

re

Bran

ch Li

neNi

pple

(Inle

t)Ro

om Si

ze/

Escu

tche

onBr

acke

tCl

ass

❑ 0

- No

Brac

ket

❑ A

- VicF

lex❑

27 -

V27

❑ 3

1 - V3

1❑

34 -

V34

❑ 3

8 - V3

8

❑ B

- ST

D PE

ND❑

P -

STD

CNC

❑ G

- EC

LH PE

ND❑

J - E

CLH

CNC

❑ K

- RE

S PEN

D❑

N -

RES C

NC

❑ 1

- ½

" NPT

❑ 2

- ¾

" NPT

❑ 6

- ½

" BSP

T❑

7 -

¾" B

SPT

❑ 2

- 2¼

x 1"

NPT

St

raigh

t❑

6 -

2¼ x

1" BS

PT

Stra

ight

❑ 7

- 2¼

x ¾

" BSP

T St

raigh

t❑

8 -

2¾ x

1¼" B

SPT

Stra

ight

❑ 1

- 5¾

" Stra

ight

❑ 2

- 9"

Stra

ight

❑ 3

- 13

" Stra

ight

❑ 4

- 4¾

" Elbo

w❑

5 -

6¼" E

lbow

❑ 6

- Sh

ort L

ow Pr

o�le

90° E

lbow

*❑

7 -

Long

Low

Pro�

le 90

° Elbo

w *

❑ A

- 13

5°F/

57°C

❑ C

- 15

5°F/

68°C

❑ F

- 20

0°F/

93°C

❑ S

- St

anda

rd❑

Q -

Quick

❑ H

- 4.9

❑ 4

- 5.6

❑ 5

- 8.0

❑ 6

- 11

.2❑

7 -

14.0

❑ L

- La

rge

❑ S

- Sm

all❑

W - W

hite S

S Es

cutch

eon

❑ X

- St

ainles

s Esc

utch

eon

❑ N

- VC2

50❑

0 -

N/A

❑ 1

- Pla

in Br

ass

❑ 2

- Ch

rom

e❑

4 - W

hite (

RAL

9010

)❑

N - V

C250

Hose

Styl

e❑

2 -

31"

❑ 3

- 36

"❑

4 -

48"

❑ 5

- 60

"❑

6 -

72"

Hose

Leng

th❑

1 -

AH1

❑ 2

- AH

2❑

5 -

AH5

❑ 6

- AH

2-30

0❑

8 -

AH2-

CC

Redu

cer

(out

let)

A0

NO

TE: A

ll sy

stem

s are

PO

A. C

onta

ct c

usto

mer

car

e fo

r pric

ing.

* N

ote:

for u

se w

ith A

B11

Brac

ket o

nly.



CTI

ON

5

VICFL

Ex™

SPR

INk

LER

FIT

TIN

G S

YSTE

MS


V36 Dry Sprinkler with Integral Style AB6 Assembly Order Form

V36 Dry Sprinkler with Integral Style AB6 Assembly Order FormBi

llTo

:Sh

ip To:

Tag

Emai

lPh

one

No.

Fax

No.

Stat

e/Pr

ovin

ce

Com

pany

Nam

e

Qua

ntity

(as s

peci

�ed

belo

w):

If un

its o

f di�

eren

t siz

e, ty

pe o

r oth

er o

ptio

n ar

e re

quire

d, p

leas

e at

tach

add

ition

al fo

rm(s

) with

thei

r spe

ci�c

atio

n(s)

sepa

rate

ly.

Add

ress

Ord

er N

o.

Com

pany

Nam

e

Addr

ess

Stat

e

Zip

Code

/Pos

tal C

ode

Zip

Code

Dat

e

V36

Dry

Spr

inkl

er w

ith In

tegr

al S

tyle

AB

6 As

sem

bly

NO

TE: A

ll sy

stem

s are

PO

A. C

onta

ct C

usto

mer

Car

e fo

r pric

ing.

Sprin

kler

Fr

ame

Clas

sSp

rinkl

erTh

read

Sprin

kler

Fini

shDe

�ect

or

Styl

eSp

rinkl

erRe

spon

seSp

rinkl

erK-

Fact

orSp

rinkl

erTe

mpe

ratu

reHo

se

Leng

thBr

acke

tSt

yle

Hose

Styl

eEs

cutc

heon

M

ater

ial

Nipp

le

❑ 1

- 1"

BSPT

❑ 2

- 1"

NPT

❑ A

- VicF

lex™

❑ 3

6 - V3

6 Sp

rinkle

rs❑

B -

STD

PEND

❑ C

- HO

RSID

EWAL

L

❑ 3

- 1"

NPT

❑ A

- 13

5°F/

57°C

❑ C

- 15

5°F/

68°C

❑ F

- 20

0°F/

93°C

❑ J

- 286

°F/1

41°C

❑ S

- St

anda

rd❑

Q -

Quick

❑ 4

- 5.6

❑ 5

- 8.0

❑ 0

- Co

ldRo

lled S

teel

❑ N

- VC2

50

❑ 2

- Ch

rom

e❑

4 - W

hite

(RAL

9010

)❑

N - V

C250

❑ A

B6 -

AB6

Escu

tche

onSt

yle

❑ 1

1 - Fl

ush

❑ 1

3 - Sl

eeve

an

d Skir

t

❑ 2

- 31

"❑

3 -

36"

❑ 4

- 48

"❑

5 -

60"

❑ 6

- 72

"

Free

zer W

all

Thick

ness

¼"

ADi

men

sion

¼"

❑ 0

30 -

3"❑

040

- 4"

❑ 0

50 -

5"❑

060

- 6"

❑ 0

70 -

7"❑

080

- 8"

❑ 0

90 -

9"❑

100

- 10

"❑

110

- 11

"❑

120

- 12

"

❑ 2

- AH

2 Ho

se❑

0

ADi

men

sion

Inch

es

❑ 1

1❑

16

❑ 1

8❑

20

❑ 2

2❑

24

❑ 2

6❑

28

❑ 3

0

A3

00

22

36AB

6

5-7



SECTIO

N 5

VIC

FLEx™

SPR

INk

LER FITTIN

G SYS

TEMS


V36 Dry Sprinkler with Style AB6 Accessories

V36 Dry Sprinkler with Style AB6 Accessories AB6 Optional Accessories

Approx. Wgt. Ea. lb

Victaulic Part No. Price Each

Style AB6 Installation Toggle 0.3 A000AQBTOG $22.50Spacer/Lockwasher Kit – K000AB6SPR 101.00Right Angle Adapter – JM83AB6RAA 48.00Wrench – ST10AQBAB6 110.00


Series AQC-U for Clean Room Applications

Series AQC-U

FOR CLEAN ROOM APPLICATIONSRefer to publication 10.86

Size Approx. Wgt. Ea. Victaulic Part No. Priceinches lb Each

36 x Z\x 2.8 A36HAQC000 $407.0048 x Z\x 3.2 A48HAQC000 428.0072 x Z\x 4.0 A72HAQC000 528.50


NOTE: Approved for use with M+W Zander Facility Engineering GmbH. Other cleanroom ceiling manufacturers can be evalu-ated and potentially approved on a case-by-case basis. Please refer to publication 10.86 for more information.

Series AQD For Duct Systems

Series AQD

FOR dUCT SYSTEMSRefer to publication 10.87

SizeBase Mount

RadiusRound duct

dia.Approx. Wgt.

Ea. Victaulic Priceinches inches lb Part No. Each

24 x Z\x 6.1 Round 12 – 14 2.2 A24HAQD96R $897.509.4 Round 16 – 24 2.2 A24HAQD99R 897.50

18.9 Round 26 – 72 2.2 A24HAQD91R 897.50Square N/A 2.2 A24HAQD96S 897.50

48 x Z\x 6.1 Round 12 – 14 2.6 A48HAQD96R 985.509.4 Round 16 – 24 2.6 A48HAQD99R 985.50


72 x Z\x 6.1 Round 12 – 14 3.1 A72HAQD96R 1110.509.4 Round 16 – 24 3.1 A72HAQD99R 1110.50





CTI

ON

5

VICFL

Ex™

SPR

INk

LER

FIT

TIN

G S

YSTE

MS




VicFlex™ Dry Sprinkler Model VS1

VicFlex™ Dry Sprinkler Model VS1

RECESSEd OR SLEEVE ANd SkIRT PENdENT OR SIdEWALL, CONCEALEd PENdENT

1” NPT Thread K5.6Refer to publication 10.91

Length Approx. Wgt. Ea. Box Price Each

inches lb Quantity †

V3505, V3506, V3509, V3510

Recessed or Sleeve and Skirt Pendent

or SidewallV3517, V3518

Concealed Pendent38 3.9 5 $514.00 $568.5050 4.3 5 550.00 605.0058 4.6 5 586.50 642.00


NOTE: Concealed cover plates must be ordered separately.

† Sold in box quantities of five (5) only.

Flat PlateConcealed Pendent

RecessedPendent

Sleeve and SkirtPendent

RecessedSidewall

Sleeve and SkirtSidewall

– – – – – – – – – – 12A S 4 4 W3 B35 380J

Class Style ThreadDe�ector

Style Response K FactorTemperature Finish

RecessedEscutcheon

Material Code InchesEscutcheon

Style †

Model VS1 Figure Configuration

380 = 38"500 = 50"580 = 58"

35 = V35

A 4 = K5.6Q = QuickS = Std.

3 = 1" NPT8 = 25 mm BSP

12 = Recessed13 = Sleeve and Skirt15 = Concealed

A = 135°F/57°CC = 155°F/68°CE = 175°F/79°CF = 200°F/93°CJ = 286°F/141°C

W = White Stainless SteelX = Stainless Steel

4 = WhiteN = VC-250 ‡0 = Concealed

B = PendentC = Horizontal SidewallP - Concealed

Size

Model VS1 Cover Plates

REPLACEMENT VS1 COVER PLATES

Finish135° F/57° C 165°F/74°C

Part Code Price Part Code PriceChrome A35-06A-0020 $23.00 A35-06D-0020 $23.00

Bright Brass A35-06A-0030 23.00 A35-06D-0030 23.00White A35-06A-0040 23.00 A35-06D-0040 23.00

Custom A35-06A-00_0 + A35-06D-00_0 +


For custom finishes, contact Victaulic for details.

5-9



SECTIO

N 5

VIC

FLEx™

SPR

INk

LER FITTIN

G SYS

TEMS



VicFlex™ Dry Sprinkler Brackets

VicFlex™ Dry Sprinkler Brackets Bracket Size


description inches lb Part No. Quantity † EachStyle VB1

– 0.2 A000000SLV 5 $37.50Wood and metal stud or joistStyle VB2 24 1.5 A24TBAR000 5 111.00Recessed pendent, suspended lay-in tile ceilings 48 2.7 A48TBAR000 5 140.00

Style VB3 24 1.6 A240AQBVB3 5 111.00Concealed pendent, suspended lay-in tile ceilings 48 2.9 A480AQBVB3 5 140.00


† Sold in box quantities of five (5) only.



CTI

ON

5

VICFL

Ex™

SPR

INk

LER

FIT

TIN

G S

YSTE

MS


SECTION 6 – Vic-Press™ System, for Schedule 10S Stainless Steel Pipe

Vic-Press™ System for Schedule 10S Stainless Steel Pipe



™ Vic-Press™ System for Type 304 Schedule 10S Stainless Steel PipeThe Victaulic® Vic-Press™ System for joining Schedule 10S Type 304 (L) stainless steel pipe provides a fast, easy, clean, and reliable means for joining Z\x – 2”/15 – 50 mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press™ Schedule 10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI Class 150 (except steam, according to standard temperature/pressure charts) for water, oil, noncombustible gaseous and general chemical services and are dimen-sioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service.

The Vic-Press™ Schedule 10S System requires no flame or arc as with welding, and no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the coupling and the coupling or fitting is pressed onto the pipe in seconds.

The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME B31.1, B31.3 and B31.9.

Vic-Press™ Schedule 10S Type 304 couplings and fittings are ANSI/NSF 61 Annex G Certified for cold (+86°F/+30°C) and hot (+180°F/+82°C) potable water service for Grade H and Grade E seal materials. FM Approved to 175 psi/1200 kPa service for above ground sprinkler systems.

Vic-Press 304Seal Selection

Seal Selection

(Unless specified otherwise, Grade “H” seals will be supplied)

GRAdETEMP.


STANdARd SEAL

H –20°F to +210°F HNBRTwo

OrangeStripes

May be specified for hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and min-eral oils, engine oil and transmission oil. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372.

OPTIONAL SEALS – Contact Victaulic for delivery time


May be specified for hot water service, dilute acids, oil-free air, chemical services. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM OR STEAM SERVICES.

O +20°F to +300°F Fluoro-elastomer

BlueStripe

May be specified for oxidizing acids, petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids, and air with hydrocarbons. NOT COMPATIBLE FOR USE WITH HOT WATER OR STEAM SERVICES.

* Vic-Press Schedule 10S stainless steel products must only be used on services compatible with seal and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.


Vic-Press™ System For Type 304 Schedule 10S Stainless Steel Pipe SE

CTI

ON

6

VIC

-PR

FES

S™ F

OR

SCH

EdLE

10S


WARNING• Before attempting to install any Vic-Press™ Schedule 10S System products,

carefully read and fully understand the “Vic-Press™ Schedule 10S Products Installation Instructions” (I-P500) and the operating and maintenance manual supplied with the tool.

Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.

Style P500 Loose Seals

Style P500

LOOSE SEALSRefer to publication 18.12

STYLE P500 – SPARE PARTS – LOOSE SEALS

Nominal Size Price Each †

inchesStandard Grade “H” HNBR or Grade “E” EPdM

SealZ\x $9.50C\v 10.501 13.50

1Z\x 17.002 23.50

† Specify choice clearly on order.


Style P597 Standard Coupling

Style P597

STANdARd COUPLING

(P X P)Refer to publication 18.12

STYLE P597 – WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL

Nominal Size

Approx. Weight Each Price Each †

inches lbStandard Grade “H” HNBR or

Grade “E” EPdM SealZ\x 0.2 $59.50C\v 0.3 65.501 0.5 74.00

1Z\x 0.7 99.002 1.0 130.00


Style P596 Male Adapter – Threaded

Style P596

MALE AdAPTER – THREAdEd

(P X M)Refer to publication 18.12


Nominal Size


inches lbStandard Grade “H” HNBR or Grade “E”

EPdM SealZ\x x Z\x 0.3 $111.00C\v x Z\x 0.4 115.50

C\v 0.4 115.501 0.5 133.50

1 x C\v 0.5 137.001 0.6 137.00

1Z\x x C\v 0.8 254.001Z\x 1.0 227.50

2 x 2 1.4 280.50


6-3

Vic-Press™ System For Type 304 Schedule 10S Stainless Steel Pipe


SECTIO

N 6

VIC

-PR

FES

S™ FO

R S

CH

EdLE

10S





Series P569 Type 316 Stainless Steel Ball Valve

Series P569

TYPE 316 STAINLESS STEEL BALL VALVE WITH LOCkING HANdLERefer to publication 18.12

P x P

P x G

G x G

For Series P569 pricing, please refer to Series P569 in the Type 316 section.

Series P589 Brass Body Ball Valve

Series P589

VIC-PRESS™ SCHEdULE 10S SYSTEM BRASS BOdY BALL VALVE

Stainless Steel Vic-Press™ Type 304 Schedule 10S EndsRefer to publication 18.12

SERIES P589 – VIC-PRESS™ SCHEdULE 10S ENdS WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL

Nominal Size




1Z\x 4.7 643.002 6.9 787.00


Style P586 90° Elbow – Short Tangent

Style P586

90° ELBOW – SHORT TANGENT



Nominal Size




1Z\x 1.4 290.502 2.0 371.00




CTI

ON

6

VIC

-PR

FES

S™ F

OR

SCH

EdLE

10S





Style P542 90° Street Elbow

Style P542

90° STREET ELBOW

(P X T)Refer to publication 18.12


Nominal Size




1Z\x 1.4 290.502 2.0 371.00


Style P591 45° Elbow

Style P591

45° ELBOW



Nominal Size




1Z\x 1.7 253.002 2.5 323.50



Style P543

45° STREET ELBOW



Nominal Size




1Z\x 1.7 253.002 2.5 323.50


6-5



SECTIO

N 6

VIC

-PR

FES

S™ FO

R S

CH

EdLE

10S





Style P592 Tee

Style P592

TEE

(P X P X P)Refer to publication 18.12


Nominal Size




1Z\x 1.5 302.002 2.1 375.50


Style P593 Tee – Reducing Branch

Style P593

TEE – REdUCING BRANCH



Nominal Size



Grade “E” EPdM SealC\v x C\v x Z\x 0.5 $222.501 x 1 x Z\x 0.8 229.50

C\v 0.8 235.001Z\x x 1Z\x x Z\x 1.2 277.00

C\v 1.3 280.001 1.4 281.50

2 x 2 x Z\x 1.7 360.50C\v 1.7 366.001 1.8 376.00

1Z\x 2.0 414.50


Style P588 Tee – Reducing Branch – Threaded

Style P588

TEE – REdUCING BRANCH – THREAdEd

(P X P X F)Refer to publication 18.12


Nominal Size



Grade “E” EPdM SealZ\x x Z\x x Z\x 0.4 $302.00C\v x C\v x Z\x 0.5 327.00

C\v 0.6 330.001 x 1 x Z\x 0.9 332.50

C\v 0.9 333.501 1.1 362.00

1Z\x x 1Z\x x Z\x 1.4 376.00C\v 1.5 380.501 1.5 415.50

2 x 2 x Z\x 1.7 429.00C\v 1.7 433.001 2.0 464.00




CTI

ON

6

VIC

-PR

FES

S™ F

OR

SCH

EdLE

10S





Style P594 Concentric Reducer

Style P594

CONCENTRIC REdUCER



Nominal Size



EPdM SealC\v x Z\x 0.5 $181.001 x Z\x 0.6 243.50

C\v 0.7 193.501Z\x x Z\x 0.9 341.50

C\v 1.0 320.501 1.1 178.50

2 x Z\x 1.2 633.00C\v 1.3 285.501 1.4 220.50

1Z\x 1.6 220.50


Style P595 Flange Adapter

Style P595

FLANGE AdAPTER

(P X L)Refer to publication 18.12


Nominal Size




1Z\x 3.6 1035.502 5.8 1153.00




Style P565

FLANGE AdAPTER (VAN STONE TYPE)



Nominal Size




1Z\x 4.1 422.002 6.8 452.50



6-7



SECTIO

N 6

VIC

-PR

FES

S™ FO

R S

CH

EdLE

10S





Style P587 Transition Nipple

Style P587

TRANSITION NIPPLE

(T X G)Refer to publication 18.12

STYLE P587

Nominal Size

Approx. Weight

Each Unit End to End Priceinches lb Inches Each

C\v 0.3 4 $150.501 0.5 4 155.50

1Z\x 0.7 4 194.502 0.9 4 203.50



Style P584 Threaded Union

Style P584

THREAdEd UNION **



Nominal Size




1Z\x 6.0 1577.502 6.8 1944.00


** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For stan-dard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.

Style P599 Female Adapter – Threaded

Style P599

FEMALE AdAPTER – THREAdEd

(P X F)Refer to publication 18.12


Nominal Size




C\v 0.4 138.501 x Z\x 0.7 146.00

C\v 0.6 156.001 0.6 165.50

1Z\x x 1 1.0 261.001Z\x 1.0 328.00

2 x 1Z\x 1.3 323.002 1.2 355.50




CTI

ON

6

VIC

-PR

FES

S™ F

OR

SCH

EdLE

10S





Style P561 Adapter

Style P561

WELd AdAPTER



Nominal Size




1Z\x 0.9 229.502 1.4 271.50


Style P540 End Cap

Style P540

ENd CAPRefer to publication 18.12

STYLE P540

Nominal Size

Approx. Weight Each Price

inches lb EachZ\x 0.1 $138.00C\v 0.1 152.501 0.3 162.50

1Z\x 0.4 208.002 0.5 259.00

PFT510 Vic-Press Tool

PFT510 Vic-Press 10S Tool

The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf stan-dard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 7 – Pipe Preparation Tools for prices and where to call for purchase information.

NOTE: Victaulic Tool Discount will apply.

PFT510 Tool

6-9



SECTIO

N 6

VIC

-PR

FES

S™ FO

R S

CH

EdLE

10S




™ Vic-Press™ System for Type 316 Schedule 10S Stainless Steel PipeThe Victaulic® Vic-Press™ System for joining Schedule 10S Type 316 (L) stainless steel pipe provides a fast, easy, clean, and reliable means for joining Z\x – 2”/15 – 50 mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press™ Schedule 10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI Class 150 (except steam, according to standard temperature/pressure charts) for water, oil, noncombustible gaseous and general chemical services and are dimen-sioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service.

The Vic-Press™ Schedule 10S System eliminates the need for flame as in welding, no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf stan-dard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the coupling and the coupling is pressed onto the pipe and fitting in seconds.

The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME B31.1, B31.3 and B31.9.

Vic-Press™ Type 316 couplings and fittings are recommended for varying concentra-tions of hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and mineral oils, as well as automotive fluids such as engine oil and transmis-sion fluid within the temperature range of –20°F to +210°F/–29°C to +98°C. UL Classified in accordance with ANSI/NSF 61 Annex G for cold (+86°F/+30°C) and hot (+180°F/+82°C) potable water service for Grade H and Grade E seal materials. FM Approved to 175 psi/1200 kPa service for above ground sprinkler systems.

Vic-Press 316Seal Selection

Seal Selection

(Unless specified otherwise Grade “H” seals will be supplied)

GRAdETEMP.


STANdARd SEAL

H –20°F to +210°F HNBRTwo

OrangeStripes

May be specified for hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and min-eral oils, engine oil and transmission oil. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372.

OPTIONAL SEALS – Contact Victaulic for delivery time


May be specified for hot water service, dilute acids, oil-free air, chemical services. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM OR STEAM SERVICES.

O +20°F to +300°F Fluoro-elastomer

BlueStripe

May be specified for oxidizing acids, petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids, and air with hydrocarbons. NOT COMPATIBLE FOR USE WITH HOT WATER OR STEAM SERVICES.

* Vic-Press Schedule 10S stainless steel products must only be used on services compatible with seal and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.



CTI

ON

6

VIC

-PR

FES

S™ F

OR

SCH

EdLE

10S


WARNING• Before attempting to install any Vic-Press™ Schedule 10S System products,

carefully read and fully understand the “Vic-Press™ Schedule 10S Products Installation Instructions” (I-P500) and the operating and maintenance manual supplied with the tool.

Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.

Style P500 Loose Seals

Style P500

LOOSE SEALSRefer to publication 18.11

STYLE P500 – SPARE PARTS – LOOSE SEALS

Nominal Size Price Each †

inchesStandard Grade “H” HNBR or Grade “E” EPdM

SealZ\x $9.50C\v 10.501 13.50

1Z\x 17.002 23.50



Style P507 Standard Coupling

Style P507

STANdARd COUPLING



Nominal Size




1Z\x 0.7 116.502 1.0 169.00


Style P576 Male Adapter – Threaded

Style P576

MALE AdAPTER – THREAdEd

(P X M)Refer to publication 18.11


Nominal Size




C\v 0.4 119.501 0.5 137.50

1 x C\v 0.5 140.501 0.6 140.50

1Z\x x C\v 0.8 257.001Z\x 1.0 291.00

2 x 2 1.4 378.00


6-11



SECTIO

N 6

VIC

-PR

FES

S™ FO

R S

CH

EdLE

10S





Style P508 Slip Coupling

Style P508

SLIP COUPLING



Nominal Size




1Z\x 1.1 124.002 1.6 158.50


Series P569 Stainless Steel Ball Valve

Series P569

TYPE 316 STAINLESS STEEL BALL VALVE WITH LOCkING HANdLERefer to publication 18.11

P x P

P x G

G x G

SERIES P569 – VIC-PRESS SCHEdULE 10S x VIC-PRESS SCHEdULE 10S (P x P)

Nominal SizeApprox.

Weight Each

Price Each Vic-Press x Vic-Press

(P x P) †



1Z\x 6.9 1010.002 9.5 1354.50

SERIES P569 VIC-PRESS SCHEdULE 10S x GROOVEd (P x G)

Nominal SizeApprox.

Weight Each

Price Each Vic-Press x Grooved

(P x G) †


Grade “E” EPdM SealC\v 2.4 $541.501 3.6 651.00

1Z\x 6.9 1010.002 9.5 1354.50

SERIES P569 GROOVEd x GROOVEd (G x G)

Nominal SizeApprox.

Weight Each Price Each

inches lbGrooved x Grooved

(G x G)C\v 2.4 $470.501 3.6 570.50

1Z\x 6.9 899.002 9.5 1192.50





CTI

ON

6

VIC

-PR

FES

S™ F

OR

SCH

EdLE

10S




Series P569 Repair Kits

Series P569

REPAIR kITSRefer to publication 18.11

SERIES P569 REPAIR kITS

Nominal Size Price Each

inches Type 316 Stainless Steel Ball StemZ\x $88.00 +

C\v 84.00 +1 104.50 +

1Z\x 225.50 +2 382.00 +



Series P589 Brass Body Ball Valve

Series P589

VIC-PRESS™ SCHEdULE 10S SYSTEM BRASS BOdY BALL VALVE

Stainless Steel Vic-Press™ Type 316 Schedule 10S EndsRefer to publication 18.11

SERIES P589 – VIC-PRESS™ SCHEdULE 10S ENdS WITH STANdARd GRAdE “H” HNBR SEAL OR OPTIONAL GRAdE “E” SEAL

Nominal Size




1Z\x 4.7 766.502 6.9 975.50


Style P568 90° Elbow – Short Tangent

Style P568

90° ELBOW – SHORT TANGENT



Nominal Size




1Z\x 1.4 359.502 2.0 493.00



Style P562

90° STREET ELBOW



Nominal Size




1Z\x 1.4 359.502 2.0 493.00


6-13



SECTIO

N 6

VIC

-PR

FES

S™ FO

R S

CH

EdLE

10S






Style P571 45° Elbow

Style P571

45° ELBOW



Nominal Size




1Z\x 1.7 312.002 2.5 428.50



Style P563

45° STREET ELBOW



Nominal Size




1Z\x 1.7 312.002 2.5 428.50


Style P572 Tee

Style P572

TEE



Nominal Size




1Z\x 1.5 606.002 2.1 747.50




CTI

ON

6

VIC

-PR

FES

S™ F

OR

SCH

EdLE

10S





Style P573 Tee – Reducing Branch

Style P573

TEE – REdUCING BRANCH



Nominal Size



Grade “E” EPdM SealC\v x C\v x Z\x 0.5 $518.001 x 1 x Z\x 0.8 563.00

C\v 0.8 585.501Z\x x 1Z\x x Z\x 1.2 827.00

C\v 1.3 833.001 1.4 853.00

2 x 2 x Z\x 1.7 966.50C\v 1.7 995.001 1.8 1108.50

1Z\x 2.0 1138.00


Style P578 Tee – Reducing Branch Threaded

Style P578

TEE – REdUCING BRANCH THREAdEd

(P X P X F)Refer to publication 18.11


Nominal Size



Grade “E” EPdM SealZ\x x Z\x x Z\x 0.4 $632.50C\v x C\v x Z\x 0.5 700.50

C\v 0.6 718.501 x 1 x Z\x 0.9 768.00

C\v 0.9 781.501 1.1 840.50

1Z\x x 1Z\x x Z\x 1.4 918.00C\v 1.5 951.001 1.5 989.00

2 x 2 x Z\x 1.7 1012.50C\v 1.7 1049.501 2.0 1112.00


Style P574 Concentric Reducer

Style P574

CONCENTRIC REdUCER



Nominal Size



EPdM SealC\v x Z\x 0.5 $212.501 x Z\x 0.6 270.50

C\v 0.7 200.001Z\x x Z\x 0.9 400.00

C\v 1.0 263.001 1.1 185.00

2 x Z\x 1.2 691.50C\v 1.3 302.501 1.4 227.00

1Z\x 1.6 227.00


6-15



SECTIO

N 6

VIC

-PR

FES

S™ FO

R S

CH

EdLE

10S






Style P575

FLANGE AdAPTER



Nominal Size




1Z\x 3.6 1043.002 5.8 1158.50




Style P566

FLANGE AdAPTER (VAN STONE TYPE)



Nominal Size




1Z\x 4.1 422.002 6.8 452.50



Style P577 Adapter Nipple

Style P577

AdAPTER NIPPLE

(T X G)Refer to publication 18.11

STYLE P577

Nominal Size


inches lb EachC\v 0.3 $155.001 0.5 160.50

1Z\x 0.7 200.502 0.9 208.50


Style P585 Threaded Union

Style P585

THREAdEd UNION **



Nominal Size




1Z\x 6.0 1591.002 6.8 2102.00


** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For standard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.




CTI

ON

6

VIC

-PR

FES

S™ F

OR

SCH

EdLE

10S






Style P579 Female Adapter – Threaded

Style P579

FEMALE AdAPTER – THREAdEd

(P X F)Refer to publication 18.11


Nominal Size




C\v 0.4 159.501 x Z\x 0.7 168.00

C\v 0.6 177.501 0.6 187.00

1Z\x x 1 1.0 311.501Z\v 0.8 311.501Z\x 1.0 391.00

2 x 1Z\v 1.1 387.501Z\x 1.3 387.50

2 1.2 425.00



Style P560 End Cap

P560

ENd CAPRefer to publication 18.11

STYLE P560 ENd CAP

Nominal Size


inches lb EachZ\x 0.1 $313.50C\v 0.1 339.001 0.3 355.50

1Z\x 0.4 418.502 0.5 515.00

PFT510 Vic-Press Tool

PFT510 Vic-Press 10S Tool

The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 7 – Pipe Preparation Tools for prices and where to call for purchase information.

NOTE: Victaulic Tool Discount will apply.

PFT510 Tool

6-17



SECTIO

N 6

VIC

-PR

FES

S™ FO

R S

CH

EdLE

10S






Section 7 – Pipe Preparation Tools

Pipe Preparation Tools

LEASE PURCHASE AGREEMENT

Some tools manufactured by Victaulic are available through a lease purchase agreement. Contact Victaulic for details.



Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

Vic-Easy Roll Grooving Tools – Field PortableVE12

Roll Grooving Tools – Field Portable

VE12 VE12 is designed for manual grooving of C\v – 2”/DN20 – DN50 steel, stainless steel, aluminum and PVC pipe.


Tool Weight/ Shipping Weight

lbRental

Per MonthTool

List PriceVE12 R000012VE0 17/20 $1020.00 $2194.50VE12SS – Lightwall Stainless Steel R200012VE0 17/20 1020.00 2194.50

For tool rating capacity please reference publication 24.01.

VE26 S/C

VE26 VE26 is designed for manual grooving of 2 – 6”/DN50 – DN150 steel, stainless steel, aluminum, PVC, and copper tube.



lbRental

Per MonthTool

List PriceVE26S – Steel, Stainless Steel R100026VE0 22/25 $969.00 $2080.50VE26C – Copper Tube R200026VE0 22/25 969.00 2080.50VE26SS – Lightwall Stainless Steel R700026VE0 22/25 969.00 2080.50VE26P – Aluminum and PVC Pipe R750026VE0 22/25 969.00 2080.50




Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the VE26/VE46 to alternately groove pipe using stationary power drive.



lbRental

Per MonthTool

List PriceVE26/VE46 Power Drive Kit R075026KIT 7/9 N/A $386.00

VE46

VE46 VE46 is designed for manual grooving of 3Z\x – 6”/DN90 – DN150 steel, stainless steel, aluminum and PVC.



lbRental

Per MonthTool

List PriceVE46 – Steel R000046VE0 28/31 $1065.00 $2516.50VE46P – Aluminum and PVC Plastic R200046VE0 28/31 1065.00 2516.50



Pipe Preparation ToolsSE

CTI

ON

7

PIPE

PR

EPA

RAT

ION

TO

OLS






VE226 B/S/M/C/BSS/MSS/P

VE226 B/S/M/C/BSS/MSS/P †

VE226 is designed for use with a standard C\,”/10 mm square drive for roll feed with operator supplied ratchet wrench to roll groove C\v – 6”/DN20 – DN150 steel, stainless steel, aluminum, PVC and copper tube. Included are feeler gauges and allen wrench for depth stop setting. Built-on mount fits Ridgid 300® power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822).



lbRental

Per Month Tool

List Price ^VE226B – C\v – 1Z\x”/DN20 – DN40 R2022260FS 27/42 $1056.50 $2330.50VE226S – 1Z\v – 6”/DN32 – DN150 R2002260FS 27/42 1056.50 2330.50VE226M – 2 – 6”/DN50 – DN150 R3002260FS 27/42 1056.50 2330.50VE226C – 2 – 6”/DN50 – DN150 R1002260FS 27/42 1056.50 2330.50VE226BSS – C\v – 1Z\x”/ DN20 – DN40 R00X2260FS 27/42 1056.50 2330.50VE226MSS – 2 – 6”/DN50 – DN150 RXM02260FS 27/42 1056.50 2330.50VE226P – 2 – 6”/DN50 – DN150 R6002260FS 27/42 1056.50 2330.50

† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.

^ For proper operation, a power drive and pipe stand are required. See Accessories for details.


VE226 Power Drive Kit

VE226 Power Drive Kit Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive. * Ridgid is a registered trademark of the Ridge Tool Company.



lbRental

Per MonthTool

List PriceVE226 Power Drive Kit † R700-226-KIT 75/115 N/A $3789.00

† Drive unit not included.

* Ridgid™ is a trademark of Ridgid, Inc. Victaulic is not associated with Ridgid, Inc.

FireLock™ Innovative Groove System (IGS)RG2100 Roll Grooving Tool

Roll Grooving Tool

RG2100

RG2100 ROLL GROOVING TOOL

Tool Model Part NumberTool Weight

lbTool

List PriceRG2100 – carriage, grooving head, lever, cutter and reamer R1002100RG 54.0 $3472.00

RG2100L – carriage, grooving head and lever R1502100RG 40.0 2748.50

Note: Tool assembly includes: carriage, groover, cutter, reamer and lever.


7-3



SECTIO

N 7

PIP

E P

REPA

RATIO

N TO

OLS





Vic-Easy Roll Grooving Tools – Field FabricationVE106

Vic-Easy Roll Grooving Tools – Field Fabrication

VE106 Groove-N-Go VE106 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v – 6”/DN32 – DN150 pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with 1Z\v – 3”/DN32 – DN80 carbon steel roll sets; 4 – 6”/DN100 – DN150 carbon steel rolls are installed.



lb.Rental

Per MonthTool

List PriceVE106 Groove-N-Go 110V R000106110 140/200 N/A $7339.50VE106 Groove-N-Go 220V R000106220 140/200 N/A 7339.50


VE106 GROOVING ROLLS *

Pipe Material Part Number

Pipe Size Range

inches | dN

Purchase List Price

Each Set †

Standard – Carbon Steel and Sch. 40 Stainless

R912106UA6 1Z\v – 6/32 – 150 Upper $233.50R912106L03 1Z\v – 3/32 – 80 Lower 655.00R904106L06 4 – 6/100 – 150 Lower 655.00

Copper RR02106006 2 – 6/50 – 150 917.00Light Wall Stainless Steel RX RX12106L06 1Z\v – 6/32 – 150 Lower 724.50

EndSealRZ02106003 1Z\v – 3/32 – 80 958.50RZ04106006 4 – 6/100 – 150 958.50

Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details.§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.



CTI

ON

7

PIPE

PR

EPA

RAT

ION

TO

OLS




VE206

VE206 VE206 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v – 6”/DN32 – DN150 pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with standard roll sets for steel 1Z\v” – 6”/DN32 – DN150 (4 – 6”/DN100 – DN150 rolls are installed).

Tool Model Part NumberTool Weight

lbTool

List PriceVE206 – 110V with Ridgid* 700 Power Drive R000206MAS 244 $10855.50VE206 – 110V without power drive unit R000206MA1 220 7754.50

* Ridgid™ is a trademark of Ridgid, Inc. Victaulic is not associated with Ridgid, Inc.

Other compatible power drive units are available upon request.



Pipe Material Part Number

Pipe Size Range

inches | dN

Purchase List Price

Each Set †

Standard – Carbon Steel and Sch. 40 Stainless

R912106UA6 1Z\v – 6/32 – 150 Upper $233.50R912106L03 1Z\v – 3/32 – 80 Lower 655.00R904106L06 4 – 6/100 – 150 Lower 655.00

Copper RR02106006 2 – 6/50 – 150 917.00Light Wall Stainless Steel RX RX12106L06 1Z\v – 6/32 – 150 Lower 724.50

EndSealRZ02106003 1Z\v – 3/32 – 80 958.50RZ04106006 4 – 6/100 – 150 958.50

Any tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.


7-5



SECTIO

N 7

PIP

E P

REPA

RATIO

N TO

OLS




VE272SFS

VE272SFS The VE272SFS portable roll groover mounts easily to the Victaulic Ridgid 300® Power Drive. The VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick and easy. The VE272SFS is also equipped with Victaulic Company’s patented, Enhanced-Tracking grooving rolls. The tool is supplied complete with 2 – 12”/DN50 – DN300 roll sets; 8 – 12”/DN200 – DN300 rolls are installed.

NOTE: Optional C\v/DN20 and 1 – 1Z\x”/DN25 – DN40 grooving rolls available.

Requires a Ridgid 300 power drive.



lbRental

Per MonthTool

List PriceVE272SFS R000272SFS 184/250 $1665.50 $8858.50^Optional Stabilizer (8 – 12”/DN200 – 300 only) R4002720FS – 1665.50 2407.50

† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.

^ For proper operation, a power drive and pipe stand are required. See Accessories for details.


VE272SFS GROOVING ROLLS *

Pipe Material

Part Number

Pipe Size Range

inches | dN

Purchase List Price

Each Set †

Standard

R900268001 C\v/20 $3405.00R900268002 1 – 1Z\x/25 – 40 2933.00R902272003 2 – 3Z\x/50 – 90 1648.00R904272006 4 – 6/100 – 150 1761.00R908272012 8 – 12/200 – 300 1963.50

CopperRR02272006 2 – 6/50 – 150 2041.50RR08272008 8/200 2868.50

Stainless RX

RX75268001 C\v/20 3405.00RX01268002 1 – 1Z\x/25 – 40 2933.00RX02272003 2 – 3Z\x/50 – 90 2297.00RX04272006 4 – 6/100 – 150 2464.50RX08272012 8 – 12/200 – 300 2468.50

EndSealRZ02272003 2 – 3Z\x/50 – 90 2680.50RZ04272006 4 – 6/100 – 150 2741.00RZ08272012 8 – 12/200 – 300 2852.00

PVC/AluminumRP02272003 2 – 3Z\x/50 – 90 1772.00RP04272006 4 – 6/100 – 150 701.50RP08272012 8/200 2141.50

NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.





CTI

ON

7

PIPE

PR

EPA

RAT

ION

TO

OLS




Vic-Easy Roll Grooving Tools – Shop FabricationVE268

Vic-Easy Roll Grooving Tools – Shop FabricationNOTE: All shop models shipped set for 220 power, unless specified otherwise.

VE268 † NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase requires tool power to be hard wired by a local certified electrician.

Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is equipped with a pipe stabilizer for 8 – 12”/DN200 – DN300 nominal pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (2 – 12”/DN50 – DN300 pipe) * (8 – 12”/DN200 – DN300 rolls are installed, unless otherwise specified).

NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.

Request RP-268 for power requirements or visit the Victaulic web site.

† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require differ-ent incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may be required.)



lbRental

Per MonthTool

List PriceVE268 – 220V R000268VE0 735/766 $3985.00 $35979.00^

^ For proper operation, a pipe stand is required. See Accessories for details.



Pipe Material

Part Number

Pipe Size Range

inches | dN

Purchase List Price

Each Set †

Standard

R900268001 C\v/20 $3405.00R900268002 1 – 1Z\x/25 – 40 2933.00R902272003 2 – 3Z\x/50 – 80 1648.00R904272006 4 – 6/100 – 150 1761.00R908272012 8 – 12/200 – 300 1963.50

CopperRR02272006 2 – 6/50 – 150 2041.50RR08272008 8/200 2868.50

EndsealRZ02272003 2 – 3Z\x/50 – 90 2680.50RZ04272006 4 – 6/100 – 150 2741.00RZ08272012 8 – 12/200 – 300 2852.00

Stainless RX

RX75268001 C\v/20 3405.00 1 – 1Z\x/25 – 40 3405.00

RX02272003 2 – 3Z\x/50 – 80 2297.00RX04272006 4 – 6/100 – 150 2464.50RX08272012 8 – 12/200 – 300 2468.50

PVC/AluminumRP02272003 2 – 3Z\x/5- – 90 1772.00

RP04272L06 ^ 4 – 6/100 – 150 701.50RP08272012 8/200 2141.50

NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.* Refer to How to Order at the end of this section.


^ Lower roll only.

7-7



SECTIO

N 7

PIP

E P

REPA

RATIO

N TO

OLS




VAPS112 Pipe Stand

Vic-Easy Tool Accessories

VAPS112 Vic-Easy Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design allows for rotational and forward/traverse movement. They are designed for direct use with Vic-Easy roll grooving tools: VE272SFS, VE268, VE270FSD.

Capacities: 1 – 12”/DN25 – DN300 IPS pipe †

Load Rating: 1075 lbs

Vertical Stroke: 14Z\x”/368.3 mm for adjusting rod; 8Z\x”/215.9 mm leg adjustment; 23”/584.2 mm total

Min. Pipe Height from Floor: 23”/584.2 mm on 12”/300 mm pipe; 21”/533.4 mm on 1”/25 mm pipe

Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.



lbRental

Per MonthTool

List Price VAPS 112 R000112PS0 190/220 $996.50 $7192.50

† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.



CTI

ON

7

PIPE

PR

EPA

RAT

ION

TO

OLS



Hole Cutting ToolsVHCT900

Hole Cutting Tools

VHCT900 Includes three-piece hole cutting tool (Base, drill motor and feed assembly), arbor assembly, coupon remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded 120/1/60 – 10 amp electrical supply. (220/1/60 – 10 amp no cost option)

Capacities: 1 – 4Z\x”/25 – 120 mm holes for Z\x – 4”/DN15 – DN100 Mechanical-T, Strapless Outlet connec-tions.



lbRental

Per MonthTool

List PriceVHCT900 – 110V R000900HCT 36/61 $2163.00 $6630.00

The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.

HCT908

HCT908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x”/120 mm carbon and stainless steel pipe. This allows for use of Mechanical-T, Strapless Outlet, Thermometer Outlet, and Style 922 Outlet Tee. The speed is variable and requires 110 volt power supply to operate.

Capacities: 1 – 2C\v”/15 – 70 mm holes for Z\x – 2 Z\x”/DN15 – 76 mm Mechanical-T connections.



lbRental

Per MonthTool

List PriceHCT908 R000908HCT 35/48 $894.50 $4044.50

The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.

7-9



SECTIO

N 7

PIP

E P

REPA

RATIO

N TO

OLS



Vic-Press™ ToolPFT510

Vic-Press™ Tool

PFT510 Vic-Press™ Tool

The Vic-Press™ tool for ASTM A-312 Schedule 10S stainless steel pipe arrives in 2 carrying cases and includes:

Case 1 – PFT510 Vic-Press™ tool, 2 batteries, 120 VAC charger, wire brush, and 1 tube of lubricant

Case 2 – Z\x”/DN15, C\v”/DN20, and 1”/DN25 jaws, 1Z\x”/DN40 and 2”/DN50m ring-jaws, ring-jaw adapter jaw, insertion gauge set

WARNING: The PFT510 Vic-Press™ tool is designed for use only with Vic-Press™ Schedule 10S system couplings, valves and fittings. Do not attempt to install Schedule 5 Carbon Steel Press products with this tool. Failure to follow this instruction could cause system failure resulting in serious personal injury and property damage. Refer to TM-PFT510 for complete tool operating instructions.



lb #Tool

List PricePFT510 Vic-Press™ Tool – 110V R120510PFS 102 $10977.00

# Weight is for tool and complete set of jaws.

Contact Victaulic for Replacement Gauge Kit (R000501SET) pricing and availability.

PFT510 JAWS ANd AdAPTER

description / Size inches Part Number Price Each

PFT510 Jaw Adapter RJAW510ADP $931.501/2 RJAW510050 764.503/4 RJAW510075 764.501 RJAW510100 764.50

11/2 RJAW510150 2946.002 RJAW510200 2946.00




CTI

ON

7

PIPE

PR

EPA

RAT

ION

TO

OLS



WARNING• Always read and understand all operating and maintenance instructions before

attempting to use any Victaulic pipe preparation tools.Victaulic tool operating and maintenance manuals can also be located at victaulic.com.

• Any Victaulic pipe preparation tools must be used by trained operators ONLY. Operators that use Victaulic Pipe Cut-Off Tools must be knowledgeable in sound welding and safety procedures.

Misuse of any equipment and lack of adherance to proper safety procedures may result in serious personal injury, property damage, and/or product damage.

How to Order

How to Order When ordering tools or tool parts, please include the following information:A. PARTS ORDERS1. Tool Model Number. Example: VE272SFS. 2. Tool Serial Number. The serial number can be found on the tool name plate.3. Part Number and Description. Example: Part #09, R-201-261-0FS, Pump. 4. Where to send the part(s). Company Name, Address and Telephone Number5. Attention: Person’s Name6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. B. TOOL ORDERS1. Tool Model Number. Example: VE416FSD. 2. Tool Description. Example: Vic-Easy VE416FSD Roll Grooving Tool. 3. Where to send the tool. Company Name, Address and Telephone Number4. Attention: Person’s Name5.Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. C. TOOL RENTAL ORDER1. A completed and signed tool rental agreement. 2. Purchase Order Number. 3. Tool Model Number. Example: VE272SFS4. Tool Description. Example: Vic-Easy VE272SFS Roll Grooving Tool. 5. Where to send the tool. Company Name, Address and Telephone6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. NOTES: Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving. PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116. Copper/nickel pipe - contact Victaulic for details. Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets. Note: Vic-Easy tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove Dimension charts and to ANSI/AWWA C-606 standards. SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done. Optional rolls are available at an additional cost.

7-11



SECTIO

N 7

PIP

E P

REPA

RATIO

N TO

OLS



Terms and Conditions of Tool Rental

TERMS AND CONDITIONS OF TOOL RENTAL1. Lessor rents to Lessee and Lessee leases from Lessor the tool(s) and accessories listed on the reverse side hereof, which are designed for use in the preparation of

pipe to receive Victaulic products, hereinafter called the leased property; for the term specified, commencing when the leased property is delivered to carrier for delivery to Lessee.

2. Rental Rate. Lessee agrees to pay rent at the rates specified on this agreement. The rental shall be due and payable at the end of each month during the term of the lease. Terms of payment: net 30 days from date of invoice. If lease is terminated any time during the initial month, the rental shall be payable at the then current published monthly rental rate. If lease is terminated any time during a subsequent month, the rental will be prorated. (This agreement is valid for one (1) year, at the time of signing. It will be automatically renewed with price in effect at the time of renewal until the signee terminates the agreement.)

3. On-Account Payment. Lessee, on executing the agreement, has made an on-account payment to Lessor which shall be returned to Lessee upon termina-tion of the lease, or applied to any open invoices on the Lessee’s account, provided Lessee is not in default under any of the term of the lease and has returned leased property in good condition, less ordinary wear and tear.

4. Freight. Outbound: F.O.B. Shipping Point (Our Option) – Freight Collect. Return: Lessee shall pay all shipping charges for return of the leased property.

5. Use. All leased property is for the exclusive use of Lessee only, and may not be assigned, transferred, sublet or loaned to or used by any other party, without prior written consent of the Lessor.

6. Ownership. The property leased is and shall at all times remain the sole property of the Lessor, and Lessee shall have no right, title or interest therein except as expressly set forth in this Lease.

7. Taxes. Lessee shall pay all taxes, assessments, license and registration fees levied on the leased property while in the Lessee’s possession and Lessee shall keep the leased property free and clear of all liens and encumbrances. Lessee shall pay all sales taxes invoiced by Victaulic Company unless the lessee provides the lessor with a valid sales tax exemption certificate for the state where the tool is delivered.

8. Access. Lessor shall at all times have free access to the leased property and to the premises on which located, for the purpose of examining the leased property.

9. Return of Property. Lessee shall return all leased property, properly crated, freight prepaid, and insured for its market value to Lessor at one of the locations indicated on the back cover. If Lessee fails to return the leased property upon termination, Lessee shall pay rent at the then current monthly rental rate until returned, and Lessor shall also have the right to remove the leased property from Lessee’s premises, without recourse to any legal proceedings.

10. Repairs and Servicing. If leased property, excluding Tool Bits, becomes worn or unserviceable from normal recommended use, Lessor will supply replacement tools and/or parts, without cost, upon return of the leased property to Lessor.

11. Damage or Loss. If leased property is damaged by reason of other than normal recommended use, Lessee shall indemnify Lessor for the cost of repairs. If leased property is not returned to Lessor in accordance with the terms of this Agreement for any cause or reason whatsoever, including, without limiting the generality of the foregoing, loss, theft, damage, accident, neglect, abuse or destruction, by fire or otherwise, whether due to Lessee’s fault or not, Lessee shall pay to Lessor as liquidated damages an amount to be determined by Lessor not to exceed the list price of all leased property, as published in the most current Victaulic price list for Pipe Preparation tools.

12. Indemnity. Lessee assumes full responsibility for the operation of the leased property and shall indemnify, protect, save and keep harmless the Lessor, its agents and servants from and against all losses, damages, penalties, claims, actions, suits, costs, expenses and disbursements, including legal expenses of what-soever kind in nature imposed upon, incurred by, or asserted against the Lessor in any way relating to or arising out of this Lease or of the Lessee’s delivery, pos-session, use, operation or return of the leased property. The indemnities contained in this paragraph shall continue in full force and effect, notwithstanding the termination of this Lease.

13. Lessor’s remedies on default. If the Lessee, with regard to any item or items of property, fails to pay any rent or other amount herein provided when the same shall become due and payable, or if the Lessee, with regard to any item or items of leased property, fails to observe, keep or perform any other provisions of this lease required to be observed, kept, or performed by the Lessee, or if any execution or other writ or process shall be issued in any action or proceeding against the Lessee, whereby the said leased property may be taken, the Lessor shall have the right to exercise any one or more of the following remedies:

(a) To declare the entire amount of rent hereunder immediately due and payable as to any or all items of leased property, without notice or demand to the Lessee.

(b) To sue for and recover all rents, and other payments, then accrued or thereafter accruing, with respect to any or all items of leased property.

(c) To take possession of any or all items of leased property without demand or notice, wherever the same shall be located, without any court order or other pro-cess of law. The Lessee hereby waives any and all damage occasioned by such taking of possession. Any said taking of possession shall not constitute a termina-tion of this lease as to any or all items of leased property unless the Lessor expressly so notifies the Lessee in writing.

(d) To terminate this lease as to any or all items of leased property.

(e) To pursue any other remedy at law or in equity.

Notwithstanding any such repossession or any other action, which the Lessor may take, the Lessee shall be and remain liable for the full performance of all obli-gations on its part to be performed under this lease; provided however, that if the Lessor is able to obtain any monies for said leased property from re-rental or sale thereof, which the Lessor specifically is not in any manner obligated to do, said monies, less expenses, shall be credited to the last payments of the Lessee’s obligation. Waiver of any default herein is not a waiver of any subsequent default. All such remedies are cumulative and may be exercised concurrently or sepa-rately.

14. Bankruptcy. Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as amended, is commenced by or against the Lessee, or if the Lessee is adjudged insolvent, or if the Lessee makes any assignment for the benefit of his creditors, or if a writ of attachment or execution is levied on any item or items of leased property and is not released or satisfied within 10 days thereafter, or if a receiver is appointed in any proceeding or action, to which the Lessee is a party, with authority to take possession or control of any item or items of the leased property, the Lessor shall have any may exercise any one or more of the remedies set forth in Paragraph 13 hereof; and this lease shall, at the option of the Lessor, without notice immediately terminate and shall not be treated as an asset of the Lessee after the exercise of said option.

15. Concurrent Remedies: The rights and remedies provided in this lease for the benefit of the Lessor shall be cumulative and shall not be exclusive but in addi-tion to any other remedies to which the Lessor may be entitled. the Lessee waives trial by jury in any action or proceeding arising hereunder.

16. Lessor’s expenses: The Lessee shall pay the Lessor all costs and expenses, including attorney’s fees, incurred by the Lessor in exercising any of its rights or rem-edies hereunder or enforcing any of the terms, conditions, or provisions hereof.

17. Binding Effect of Lease. This lease agreement shall inure to the benefit of and be binding upon the parties hereto and their respective heirs, executors, administrators, personal or legal representatives, successors and assigns.

18. Applicable Law and Severability. This lease shall be governed by and construed under the laws of the State of Pennsylvania. If any provision herein is invalid, it shall be considered deleted from this lease, and shall not invalidate the remaining provisions of this lease.



CTI

ON

7

PIPE

PR

EPA

RAT

ION

TO

OLS



Terms and Conditions of Tool Sale

TERMS AND CONDITIONS OF TOOL SALEControlling Provisions: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.

No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waive is specifically accepted in writing by an authorized representative of Victaulic.

Prices, Designs and Terms and Conditions of Sale are subject to change without notice.

Minimum Order: $500.00 net for any single order.

Terms of Payment: As stated on invoice. Maximum permissible interest rate thereafter.

Shipping Terms: F.O.B. shipping point (our option), freight prepaid and allowed on single orders having a net price value of $12500 and over, for shipment at one time to one destination within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.

Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.

The most economical routing to recognized delivery points will be used, at our discretion. If special routing is desired, orders should so state.

Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.

Shipping dates are estimated as closely as possible. We use our best efforts to ship within the time estimated, but cannot guarantee to do so. In the event production or shipment is delayed, we reserve the privilege of changing shipping estimate. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.

Orders, when accepted, cannot be countermanded without our written consent. No material will be taken back without our written con-sent. Orders for non-standard material may not be cancelled nor will we accept return of such material for credit.

All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.

Weights: All weights are approximate shipping weights and subject to change without notice.

Victaulic Company maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment without notice and without incurring obligation.

WARRANTYStandard product warranty applies. See Inside Back Cover.

NOTE: Reconditioned tools shall be warranted 30 days from date of purchase.

7-13



SECTIO

N 7

PIP

E P

REPA

RATIO

N TO

OLS


Terms and Conditions of Sale

Terms and Conditions of SaleCONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.

No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.

Prices, Designs and Terms and Conditions of Sale are subject to change without notice.

TERMS OF PAYMENT: As stated on invoice. Maximum legal interest rate charged thereafter.

MINIMUM INVOICE CHARGES: $500 net for any single order.

SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders (excluding Vic-Headers) having a net price value of $12500 and over for shipment at one time to one destination into distributor stock or direct ship to a project, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.

Shipping and handling charges on orders less than net price value of $12500, F.O.B. shipping point (our option) will be paid by the customer. The most economical routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or handling that has been requested by the customer, and is a deviation to our normal handling methods, will be added to the order and paid by the customer.

Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.

Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.

Victaulic will endeavor to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet s hipping dates.

Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent. Orders for non-standard (i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the right to change the designation of products from standard to non-standard and vice versa. This may be done at any time without notice, and without incurring obligation. For further information con-tact Victaulic.

All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.

WEIGHTS: All weights are approximate shipping weights and subject to change without notice.

Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment without notice and without incurring obligation.

Warranty, Victaulic Contact Information

WarrantyWe warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been defective.

THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.

Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.

This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Victaulic’s factory or which has been used in a manner contrary to Victaulic’s instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.

Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.EFFECTIVE FEBRUARY 5, 2018

victauliclocations.com

FIRE PROTECTION PRICE LIST

PL2018-FP 11546 REV B 02/2018Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries. All other trademarks listed herein are the property of their respective holders, in the U.S. and/or other countries. The terms “Patented” or “Patent Pending” refer to design or utility patents or patent applications for articles and/or methods of use in the United States and/or other countries.

© 2018 VICTAULIC COMPANY. ALL RIGHTS RESERVED.

U.S./World Headquarters4901 Kesslersville Road Easton, PA 18040 USA

EMEAIPrijkelstraat 36 9810 Nazareth, Belgium

Asia PacificUnit 808, Building B Hongwell International Plaza No.1602 West Zhongshan Road Shanghai, China 200235

Effective February 5, 2018FIRE PROTECTION PRICE LIST

FIRE PROTECTION PRICE LISTPL2018-FP Effective February 5, 2018

COUPLINGS, FITTINGS, VALVES AND ACCESSORIESCOUPLINGS, FITTINGS, VALVES AND ACCESSORIES

https://twitter.com/Victaulic

https://www.facebook.com/VictaulicCompany

http://www.youtube.com/user/VictaulicCompany

http://www.linkedin.com/company/victaulic

http://i.youku.com/i/UMzUzODA2ODM2

Documents

COUPLINGS, FITTINGS, VALVES AND ACCESSORIES … · FIRE PROTECTION PRICE LIST PL2018-FP 11546 REV B 02/2018 ... Style 920/920N Mechanical-T Outlet Vic-Tap II Style 920/920N Mechanical-T