Cover Dec 2017 - Building Services News...2 Building Services News l November/December 2017NEWS AND PRODUCTS Industry supports ‘Better Life Cycle’ Industry representatives gathered

ISSN 0791-0878 November/December 2017

BuildingBuildingServicesServicesnews

Joint conferencepoints way forward

M&ECA and AECI, Killarney

FREEWITHTHIS

ISSUE

Building Services News 2018 Wallplanner

New ASHRAE Irish Branches

RACGS Golfer of the Year

Digital Lighting Design

Cover Dec 2017.indd 1 28/11/2017 17:10

www.mitsubishielectric.ieEmail: [email protected] Tel: +353-1-419 8800

Ecodan Dedicated Domestic UnitAIR-TO-WATER HEAT PUMP SYSTEM

Part L Compliance Stylish Design

Ultra Quiet Compact Size

Energy Rated A++ High Performance

Renewable Heating Technology

Mitsubishi Advert August 2017.indd 1 27/07/2017 07:54

37 DAIKIN INNOVATORS FORUM Home Energy Innovators Forum initiative proves huge success.

38 XYLEM LIFE-SAVING Xylem’s life-saving water schemes.

39 CAMPION PUMPS DUBLIN Campion Pumps opens new Dublin outlet.

42 JOINT CONFERENCEJoint initiative by M&ECA and ACEI points way forward for the future.

43 SIRUS SCHOLARSHIP Sirus and DIT team up with engineering scholarship.

46 ASHRAE UP PRESENCE ASHRAE Ireland establishes new branches.

47 S&P OPTIMA ULTRA Innovative solution for indoor air quality and comfort.

48 MHI PREMIUM PAC New PAC multi-split from Diamond Air.

49 FERRARI PROCESS FANS Ferrari proves perfect complement to S&P range.

50 HTS AT ST JAMES’S HTS deliver bespoke plantroom at Childrens’ Hospital.

52 LIGHT + BUILDING “Smartifi cation” only way forward.

53 DIGITAL LIGHTING Carl Collins on lighting up digital engineering.

56 ENGINEERING TIM

Building Services News l November/December 2017 1

Skills shortage a surprise? … not really!

It is ironic and indeed somewhat disheartening that, having

survived the recession, building services is now faced with a massive skills shortage that could derail, or at least hinder, the industry’s recovery.

Skills shortages are evident across all industry segments and are impacting on consultancy fi rms, sales and marketing departments, contracting and the crafts/trades inputs.

Sadly, this scenario comes as no great surprise. It was widely predicted and talked about in recent years yet no individuals, or representative bodies, took responsibility for it.

The few minor initiatives currently underway are not of any signifi cance in the grand scheme of things. What’s needed urgently is a cohesive, all-industry approach. Question is, who will step up and lead it?

ISSN 0791-0878Published by:Pressline Ltd, Carraig Court, George’s Avenue, Blackrock, Co Dublin.Tel: 01 - 288 5001/2/3 Fax: 01 - 288 6966 email: [email protected]: www.buildingservicesnews.com www.pressline.iePublisher and Editor: Pat LehaneAdvertisement Director: Joe WarrenOrigination and Design:Pressline Ltd. Tel: 01 - 288 5001Subscription: One Year – e70 Printed by: Swift Print Solutions (SPS).© All editorial contents and all advertisements prepared by the publishers, Pressline Ltd.

NEWS AND PRODUCTS 2Latest industry news and developments.

GRANT BOILER AWARD 10Grant Vortex awarded Which? Best Buy 2017.

BPM TRAINING SUPPORT 12“Inside Tech” courtesy Baxi Potterton Myson.

SPECIFY MERRIOTT OPTIMA 14Introducing Optima, Merriott’s

latest LST radiator range.

MITSUBISHI ELECTRIC RADS 16i-LIFE2 Slim, the new range of fan-assisted

radiators from Mitsubishi Electric.

FARAL ALLIANCE RADIATORS 18Faral Alliance radiator range now comes

with 15-year guarantee.

BTU ROUND UP 19Newlands and Grange results.

NEW MD AT HEVAC 22Hevac looks to the future with Garrett

White appointment as MD.

CONCENTRIX SOLUTION 23Aircon teams with Panasonic at

Belfast’s Concentrix Data Centre.

SEAI AWARDS 31Awards recipients deliver 27 million

in energy cost savings.

BOSS X-POT 36BOSS™ X-POT side stream fi lter from BSS.

RACGS 26 ROUND-UP Results from fi nal outing in Carlow.

Jim Curley delivers his address at the opening of the recent M&ECA and ACEI joint conference in Killarney.

Contents December 2017.indd 1 29/11/2017 09:55

2 Building Services News l November/December 2017

NEWS AND PRODUCTS

Industry supports ‘Better Life Cycle’ Industry representatives gathered last week to acknowledge their support of the Better Life Cycle 2017. The charity cycle committee presented sponsors with a framed jersey from the event which ran earlier this year.

The “Better Life Cycle” is an annual cycle event in aid of St Joseph’s Foundation, Charleville, Co Cork, that is dedicated to improving the lives of people with disabilities. To date the cycle has raised over 262,000.

Next year’s event will be the “Copper Coast Tour 2018”. The cycle will start and finish in Dungarvan with two route options, 150km and 65km. See details on Eventbrite.ie under “Better Life Cycle 2018”.

Photo shows: Kevin Scully, Brian Scully Services with Cathy Walsh, BLC Committee, Noreen Piggot, BLC Treasurer, Denis O’Connor, ACE Control Systems, Tom O’Flynn, BLC Secretary, David Doherty, Hospital Technical Systems, Richard Sherlock, Mitsubishi Electric and John Walsh, BLC Chairman.

Broderick buoyed by outlook Just twelve months on from forming Broderick Consultancy Services, Vincent Broderick has built up a varied and mixed portfolio of brands and clients involving product supply and specification, training, sales and marketing and mentoring services.

“I am very pleased with the level of success we’ve enjoyed in such a short space of time”, Vincent told Building Services News, “and indeed pleasantly surprised and heartened by the level of engagement with, and support from, the industry.”

Essentially, there are two strands to Broderick Consultancy Services – brand representation and sales, marketing and training support. The latter is quite diverse and essentially entails tailored solutions to meet individual client requirements.

When it comes to brand representation ATAG Commercial is a prime example. Vincent has secured some significant projects with the ATAG XL Commercial boiler range that delivers outputs from 65kW to 960kW. Available in three model types – XL70, XL110 and XL140 – they can be installed in-line, back-to-back, wall-mounted or free-standing.

Looking to 2018, Vincent is encouraged by the more optimistic outlook and will unveil a number of new support programmes and brand partnerships as the year unfolds.

Contact: Vincent Broderick, Broderick Consultancy Services. Tel: 087 – 784 8425 email [email protected]

Pumping/fan inverter Mitsubishi Electric’s latest pump and fan inverter, the FR-F800, offers previously unattainable performance in terms of energy saving, optimised speed control, simple start-up, connectivity and the versatility of its features.

The FR-F800 is designed to be used predominantly with pumps and fans but is equally suitable for compressors and HVAC applications. It features many innovative functions that ensure accurate control, while also achieving energy efficiency figures of 98%.

Details on the FR-F800, and all the latest catalogues from Mitsubish Electric, can be accessed via MyMitsubishi where all the latest updates are available on all of the company’s “Family Catalogues”. These catalogues are so called as they list information on each product within each product range, or each “family member” in each product family.

See Register with MyMitsubishi.

Christopher “Kit” Cuttle is a renowned lighting expert who recently did a European tour expounding the merits of, and explaining, a radical new approach to lighting metrics that is now gaining traction within the sector. On the Dublin legs he delivered a lecture in DIT Kevin St and he is pictured here with some of those who attended.

News December 2017.indd 1 29/11/2017 09:12

.

new heat pump standard

A big step setting the

The new generation Daikin Altherma 3

High performance - The 3rd Generation of Daikin Altherma is taking

you beyond the imaginable with its performance: A+++ Seasonal

efficiency and operation range down to -25°C.

Easy to install - The floor standing unit only has a 60 cm² footprint

and you can choose for white or silver-grey colour.

Easy to control - Fully digital, the Daikin Altherma 3 can be controlled

from everywhere with an app or a home control system.

Daikin Altherma 3 Advertisement EN[1].pdf 1 18/11/2017 10:35


NEWS AND PRODUCTS

Low NOx Riello Riello has developed new RDB burners based on blue flame technology, designed to meet the most stringent standards for NOx emissions in oil-fired residential boilers. The new models include RDB BG BLU, and RDB BX and BT Yellow/BLU as well as two-stage variants on both model families.

Riello’s two-stage operation system with suitable controls allows a significant increase in the overall efficiency of oil fired heating systems, along with reduced electrical consumption, making them the perfect solution for high efficiency residential boilers.

RDB BG BLU two-stage burners are suitable for use with kerosene and gasoil, utilising Riello’s new BG combustion head design for cleaner combustion. The combination of two-stage operation and low NOx emissions makes them ideal for condensing and combination oil boilers.

RDB BX BLU two-stage burners use a new BX combustion head to guarantee low NOx emissions in compliance with the ErP Ecodesign Directive. They are suitable for use with kerosene, using a specially designed kerosene pump, and also incorporate an advanced head- setting system.

All Riello RDB burners can be used in a balanced flue or conventional flue configuration and are designed for ease of installation and servicing.

See www.rielloburners.co.uk

Economy of gas-fired

humidification The new Condair DL in-duct adiabatic humidifier offers the accurate humidity control normally only available from steam humidifiers, but with the low-energy performance and evaporative cooling benefit of a cold water system. It also incorporates many anti-microbial features that make it one of the most hygienic humidifiers available.

The Condair DL is a hybrid humidifier that combines spray and evaporative technologies to maximise moisture absorption and provide humidity control at ±2%RH. A water treatment system provides pure water to a grid of nozzles located inside the duct. The nozzles spray towards a ceramic droplet separator, which has the dual action of preventing aerosols from travelling down the duct and offering secondary evaporation through its porous surface. This increases efficiency of the system with 95% of the spray water evaporating during both processes.

The Condair DL offers both the control accuracy of electric steam humidifiers and extremely hygienic operation but without the high electrical energy costs. By pre-heating the airstream prior to the Condair DL with gas-fired heating, the same volume of moisture can be absorbed by the air as steam humidification provides, but at one third the energy cost due to the economy of gas. If a building’s waste heat can be used for the pre-heating process, the humidification energy savings are even greater.

As with all adiabatic humidifiers, the Condair DL also offers the additional benefit of evaporative cooling during the warmer months. As 1kg of absorbed moisture provides 0.68kW of evaporative cooling to the air, the Condair DL can provide over 680kW of cooling per hour from as little as 1kW of consumed electrical energy.

Contact: Damien Power, Condair Area Sales Manager for Ireland. Tel: 091 – 507 120; 0044 7802 669819; email: [email protected]

Fagan joins

GrundfosPaul Fagan has been appointed Sales Engineer, Residential Building Services, Grundfos Ireland. Paul has a strong background selling to the building industry and he is also well known in GAA circles.

His duties will cover the full Grundfos range of domestic and light commercial products and will involve dealing with the residential market, contractors, consultants, specifiers, developers and merchants.

Contact: Tel: 01 – 408 9800; Mobile: 087 – 915 7551; email: [email protected]


Humidification andEvaporative Cooling

Humidifying Irelandfor over 30 years

Contact us for free expert adviceTel: +353 (0)91 507 120Web: www.condair.ie

Nationwide humidifier service team

Specialist advice and system design

Dedicated humidifier spares department

World leading humidifiers

WE AREHIRING

AHU Sales EngineerAHU sales engineer required

for our Dublin offi ce covering the 32 counties.

Product training provided but good knowledge of

AHUs required.

Send CV to [email protected]

Core Air Conditioning Ltd,

Unit A6 Centerpoint Business Park,

Oak Rd, Clondalkin, Co Dublin.

Tel: 01 – 409 8912

WWW.COREAC.COM

R E C R U I T M E N T

Core + Condair Adverts.indd 1 29/11/2017 09:43

DIT female engineering initiative DIT has introduced a unique mentorship programme that brings female engineering students together with professional women mentors from Arup and Schneider Electric, two of the largest multinational engineering companies with operations in Ireland.

The goal is to provide female students with role models who can offer guidance about career opportunities in engineering, provide support and tools for navigating this male-dominated industry, and entice and retain more women in the field.

The structured mentorship programme, which goes by the name of ESTeEM (Equality in Science and Technology by Engaged Engineering Mentoring), sees each mentor paired with two/three students for the duration of the year. The mentors will host regular lunches for the students throughout the academic year, while Arup plans to host additional events for the students at its headquarters in Ringsend.


NEWS AND PRODUCTS

McGrattan & Kenny Q Mark Award McGrattan & Kenny has won a National Q Mark Award for Best Quality Management System for Building Services Contractors at the National Q Mark Awards. This puts them in the top 6.75% of all audits completed by the EIQA on the island of Ireland.

“We are thrilled to win a Q Mark Award for the second year in a row. This shows that quality systems are woven into the fabric of our organisation and is a great achievement as we enter our 50th year in business”, said Eamon McGrattan, Managing Director.

Over 500 people, representing 135 companies, attended the award ceremony in Dublin and McGrattan & Kenny were one of only 26 awards’ recipients on the night.

CER name change to CRU The Commission for Energy Regulation (CER) has changed its name to the Commission for Regulation of Utilities (CRU) to fully reflect its broadened remit and mission to regulate energy, energy safety and water in the public interest.

The sectors the CRU regulates underpin Irish economic competitiveness, investment and growth, while also contributing to Ireland’s international obligations to address climate change.

The CRU will continue to encourage engagement with the energy market in terms of competition, safety and consumer rights. The first step in this has seen the development of a new consumer focused website, www.cru.ie, that will provide a more comprehensive resource for energy and water customers, as well as industry stakeholders.

CRU Chairperson Dr Paul McGowan said: “Since its creation in 1999 the CRU has seen significant changes in the sectors we regulate and we have evolved to keep pace with these developments. The driving principle for the CRU will continue to be the consumer, and ensuring that the public interest is protected across energy, energy safety and water.”

Minister Denis Naughten (above) said: “In view of the Commission’s expanded portfolio, the Energy Act 2016 provided for the change of name to the Commission for Regulation of Utilities. I look forward to continuing to work closely with the Commission for Regulation of Utilities in achieving our goal of a low carbon energy future.”

The McGrattan & Kenny team proudly display the Q Mark Award at the recent presentation ceremony.


NEWS AND PRODUCTS

Great response to Hansen launch Dublin-based manufacturer Sanbra Fyffe reports a great response to its recent launch of the internationally-acclaimed range of products from Hansen, the New Zealand water solution specialists.

The range of over 1,000 products includes poly compression fittings for domestic plumbing, commercial and agri applications. In recent months the Hansen Demo Unit has visited approximately 100 builders merchants and agri-stores nationwide to showcase the extent and diversity of the range.

The unit is equipped with testing equipment so visitors can see first-hand the exceptional performing flow rates of the Hansen Hi-Flo valves. These include the Mini-Fast Flo, Fast-Flo, Super Flo and Max Flo, with flow rates from 9 L/min right up to 570 L/min, providing an option to suit any installation requirements.

Hansen products also received a great reception at the Ploughing Championships in Screggan in September. Visitors to the Hansen stand were impressed that fittings up to and including 1¼” can be hand-tightened to 40 bar and are manufactured to withstand the harshest weather conditions.

“Quality is paramount and Hansen products carry a lifetime guarantee. In addition, one fitting can be used on all pipe types, ultimately saving time and money for the end-user”, said Noel Conroy, Sanbra Fyffe’s Commercial Manager.

Contact: Sanbra Fyffe. Tel: 01 – 842 6255; [email protected] or Tel: 071 - 913 3100 and [email protected]

TOTAL POLY-FITTING SOLUTION

Fits NG, HG & MDPE Pipe

HAND TIGHT

40 BARTO*FITTINGS UP TO 1¼”

NG HG

ME

TR

IC

TOTAL

POLY-FITTING

SOLUTION

FITS NG, HG

& MDPE

PIPE

Distributed byE: [email protected]

T: +353 (0)1 842 6255www.sanbra.ie

E: [email protected]: +353 (0)71 9133100

www.herron.ie



RADIATORS - RADIANT PANELS - TRENCH HEATING HEAT RECOVERY - FAN COILS

Google Headquarters, Dublin 4, Ireland

Beechmount, Homepark, Navan, Co Meath.Call us on 046 – 902 9444 Email: [email protected]

8-9 Versatile Adv Dec 2017.indd 2 29/11/2017 09:59

HEAT SOURCE: Boiler, heat pumpAPPLICATION: Commerical and public, residental,TECHNOLOGY: DBE, Low h2o,Oxygen

STRADA KNOCKONWOOD BESPOKE MAXI

ZEHNDER MULITCOLUMN

TRENCH FREE STANDING

RADIANT PANELSHEAT RECOVERY

HEAT SOURCE: Boiler, heat pump,distrct heatingAPPLICATION: Commerical and public, residental,TECHNOLOGY: DBE, Low h2o, Oxygen

HEAT SOURCE: Boiler, heat pump,district heatingAPPLICATION: Commerical and public, healthcare, educationTECHNOLOGY: DBE, Low h2o, Oxygen

HEAT SOURCE: Heat pump, lowpressured systems, district heatingAPPLICATION: Residential, commercialTECHNOLOGY: Traditional tubular steel

HEAT SOURCE: Boiler,APPLICATION: Commerical and public, residental, education and healthcareTECHNOLOGY: DBE, Low h2o

HEAT SOURCE: BoilerAPPLICATION: Commerical and public, residental, educationTECHNOLOGY: Low h2o, fan assisted, decentralised ventilation, heating and cooling

HEAT SOURCE: Boiler, heat pumpAPPLICATION:retailTECHNOLOGY: Radiant heat for

comfort, safe and hygienic

HEAT SOURCE: Boiler, heat pumpAPPLICATION: Schools, logistics depots and warehouse, gymnasiumTECHNOLOGY: Radiant heat for

safe and hygienic

outstanding energy and noiseperformance and smart technologythat helps improve the installation

8-9 Versatile Adv Dec 2017.indd 3 29/11/2017 09:59

Grant founder Stephen Grant commented: “Receiving this accolade from one of the UK’s leading consumer organisations is a fantastic achievement and is certainly a testament to our range of Vortex condensing oil boilers which are not only efficient, reliable and convenient, but also user and installer friendly. Furthermore, to be the only manufacturer to receive this recognition speaks volumes about the high quality of our products and our place at the forefront of the boiler

market in both Ireland and the UK.”The Grant Vortex boiler range

offers variety and versatility with its extensive assortment of models and is designed to fully meet the needs of both homeowners and installers alike. With its impressive efficiency ratings the Vortex range can help homeowners reduce their annual fuel bills. Meanwhile, the tailored range gives installers the great flexibility and choice required to assist customers with their home heating needs.

For almost 40 years Grant has been spearheading innovative home heating solutions across Ireland and the UK with its dedication to produce high-quality, efficient and reliable heating products. This is further reinforced with the latest recognition from Which? combined with the Energy and Utilities Alliance statistics which announced Grant oil boilers as the number one selling model in 2016.

“For an Irish-owned company based in Birr, Co Offaly – employing over 320 people and up to 80 people in the UK – to achieve this award for home heating appliances in one of Europe’s largest markets gives great pride to everyone involved in Grant”, added Stephen Grant.

Visit www.grant.eu for further information on the full range of boilers from Grant. You can also follow Grant on Facebook and Twitter @GrantIRL


Stephen Grant, founder of Grant Engineering.

Grant Vortex awarded Which? Best Buy 2017 Leading Irish heating technology manufacturer Grant Engineering has been awarded a Which? Best Buy 2017 accolade for its entire range of 63 Grant Vortex condensing oil-fired boilers in its recently-published 2017 boiler review results.

Benefits of Grant Vortex • Each Grant Vortex boiler has an ‘A’ efficiency rating and is up to 97% efficient – one of the most efficient on the market;

• The entire range features the unique and innovative award-winning Grant Vortex heat exchanger;

• Grant Vortex boilers come with a one-year manufacturer’s warranty on the burner and a five-year warranty on the boiler heat exchangers;

• Each boiler is simple to install with no complicated wiring;

• Grant Vortex Combi models ensure instant hot water;

• The Grant Vortex boiler also comes in a utility model – a smaller model specifically designed to fit in the kitchen;

• All Grant Vortex boilers feature whisper-quite operation and full- front service access;

• All Grant Vortex boilers are fully compliant with the ErP Directive.

Grant edit.indd 1 28/11/2017 16:59

MYSONwww. myson.

For renewable or conventional systems, newbuild or renovations MYSON tick all the boxes

For more information contact:Potterton MYSON Ireland Ltd. Tel: +353 (0) 1 459 0870 Email: [email protected]

Panel Radiators

Whether you are planning a new build project, doing renovation work or adding an extension, MYSON has the optimum heating solution for you.

Choose MYSON and you can be confident that you are using the highest quality products and receiving the highest quality service available.

heatingthroughinnovation.Technology

ULTRA EFFICIENT � ULTRA STYLISH � ULTRA INTELLIGENT

MORE...innovation.The award winning ULOW-E2 from MYSON combinesthe very latest in heating technology with the style ofa designer radiator.

Design Radiators & Towel Warmers Fan Convectors

Valves & ControlsUnderfloor HeatingElectric Heating

Potterton Advert Dec 15:Layout 1 27/11/2015 14:35 Page 1

12 Building Services News l November/December 2017 ••

No matter what the industry, technical support is a supremely important resource for getting the job done. For gas engineers, having this support in place is arguably more important than any other issue. While householders may contact a boiler manufacturer in the event of a problem, it’s highly likely that they will also put in a call to the original gas engineer. This means that it’s very often down to Registered Gas Installers (RGIs) to answer customers’ queries. Bearing this in mind it is vital that manufacturers offer knowledgeable and easily accessible technical support to installers.

At Baxi Potterton Myson this necessity is taken very seriously and so the company has dedicated technical experts based at its headquarters in Dublin, plus a team of call-centre staff in the Baxi UK office who have been trained on the particularities of the Irish market. For several days each month training specialist for Ireland Richard Green spends time with the team in Dublin to share knowledge and gain fresh insight which is then relayed back to call-centre staff.

For instance, most boilers in Ireland are installed on a “semi-sealed” system rather than the sealed or conventional heating systems commonly found in the UK. Sealed systems in Ireland often have an automatic filling valve which restores system pressure when it drops below a certain level. Although this can be useful

for householders who are unsure of how to re-pressurise their boiler, it makes it difficult for gas engineers to identify whether there is a leak in the system or not.

Baxi Potterton Myson also receives a number of calls related to maintenance. As there is currently no standardised process in Ireland for annual servicing,

opinions differ regarding what should be included and, as a result, important procedures can be overlooked.

For example, it is good practice to clean electrodes/ionisation probes and measure the charge in the expansion vessel and re-charge or replace if necessary. Without an adequate charge, the vessel cannot enlarge to accommodate the expansion of the heated water, meaning the water has nowhere to go. If this occurs, the safety valves are activated and the system loses pressure, resulting in non-delivery of heating or hot water.

Recognising this issue, Baxi Potterton Myson developed a full training programme for boiler servicing which covers all aspects of best practice. As the company has a fully equipped training centre in Ireland, gas engineers do not have to travel to the UK for training.

By providing comprehensive technical support along with practical and convenient training courses, Baxi Potterton Myson helps gas installers manage their customer relationships and increase their levels of service.

Contact: Damien Delaney, Technical Support Manager, Baxi Potterton Myson.Tel: Tel: 01 – 459 0870; email: [email protected].

‘Inside Tech’ courtesy Baxi Potterton Myson

Damien Delaney with Lee Keogh, a member of the Technical Support Team, during a training session in the purpose-designed Training Centre at Baxi Potterton Myson’s headquarters in Dublin.

For gas engineers, having reliable access to a team of expert technical support staff is a must-have. Whether it’s negotiating a tricky installation or preventing issues further down the line, having on-call advice is vital. Here, Damien Delaney, Technical Support Manager, Baxi Potterton Myson, gives the inside track on technical support.

No matter what the

industry, technical

support is a supremely

important resource for

getting the job done.

‘Damien Delaney

Baxi edit.indd 1 29/11/2017 10:47

To specify the Optima, contact your specialist:Pat O’Donnell on 086 0488 878Damien Parker on 086 4126 546Email: [email protected]


”It is against this background that we developed the new Merriott Optima LST range”, says Pat O’Donnell, Merriott Sales Director, Ireland. “The Optima perfectly complements our family of LST radiators and allows us to service a wider array of environments where safety and security are required”.

Optima is the outcome of a pioneering partnership between QRL Radiator Group (Merriott’s parent company and leading manufacturer of heating solutions in Ireland and the UK), and Kampmann, one of the leading manufacturers in the heating, cooling and ventilation sector in Germany and mainland Europe.

QRL and Kampmann collaborated on 12 months of research and development utilising QRL’s £150 million, fully-automated, one million sq ft production facility in South Wales, and Kampmann’s state-of-the- art R&D facility in Germany, which includes a certified EN442 Test Booth, and a 125 sq m anechoic chamber.

The resulting Optima LST range benefits from the unique water flow characteristics of the Kampmann emitter and the exceptional airflow characteristics of the QRL LST casing. This combination delivers the highest- efficiency, low water content LST on the market, with EN 442 outputs and surface temperature certification by BSRIA in the UK.

Ideal for the education, healthcare and residential care sectors, Optima delivers warmth, safety and elegance for end-users, and simplicity of

installation for contractors. In addition, it complements the overall Merriott heating product range and creates a synergy that consultants

and contractors can utilise along with the other specification-type radiators and radiant panels in the Merriott portfolio.

Key features and benefits• High-output LST that conforms to NHS DN4 which conforms to an average of 43ºC;• Manufactured and tested in accordance with BS EN442;• Four case styles providing floor mounted and wall mounted solutions;• Three TRV configurations (internal/ external);• Highly-efficient, high-output fin coil Kampmann emitter.• Anti-bacterial coating standard on brackets and casing at no extra cost;• No joints in the casing for dust to gather;• Chamfered corners and scratch- resistant cover;• Strong single-piece profiled casing in 1.6mm steel;• Linear front with 3mm deep rib detail for extra strength and durability.

Contact: Pat O’Donnell, Merriott Sales Director, Ireland. Tel: 086 – 048 8878; email: [email protected]

‘Specify Merriott Optima newest LST radiator range’ Today’s radiator market demands high- performing, energy saving and low water content products.

The new LST Optima delivers warmth, safety and elegance.

Pat O’Donnell, Merriott Sales Director, Ireland.

Merriott edit.indd 1 28/11/2017 17:00

Heat loss calculations available for the Vortex Air and Aerona3

– contact the Grant Technical Team on 057 9126967or email [email protected] further information visit www.grant.euFollow Grant online: GrantIRL and @GrantIRL

THINK BOILERS.THINK GRANT.

All Grant products are available from plumbing and heatingmerchants throughout Ireland.

BUILDING ORRETROFITTING?Grant has it covered with the new VortexAir Hybrid!

Combining the trusted attributes of the Grant Vortexcondensing oil-fired boiler with the green advantage ofan Aerona³ inverter driven air source heat pump (ASHP),the new Grant VortexAir is the perfect home heatingsolution for new builds or retrofits alike.

By using two heat sources to maximise system efficiency, theVortexAir Hybrid offers an innovative solution to homeowners when seeking a sustainable alternative to boiler replacementswith minimal disruption to the home. It also helps those buildinga new home to meet Part L and renewable obligations asrequired under building regulations in the Republic of Ireland.

BENEFITS OF THEGRANT VORTEXAIR HYBRID✔ Designed by Grant✔ Easy to install and maintain✔ 16kW ASHP Aerona3 (with ErP rating A++) coupled to either

a unique 15-21kW or 21-26kW Vortex oil boiler (ErP rating A)✔ Boiler works as a stand-alone unit and can be installed

internally or externally✔ Heat pump always fitted externally✔ Property always has back-up heating✔ Offers householder a choice of fuels✔ Meter ready, fully pre-plumbed and wired✔ Option to manually switch between hybrid and oil✔ Complies with Part L of the building regs✔ Ideal for new-build and retrofit applications✔ The air to water heat pump always gets priority

to ensure low running costs. ✔ A++ Aerona3 ASHP (6kW, 10kW and 16kW)

also available as a stand-alone unit

HEAT LOSSCALCULATIONSAVAILABLE FOR THE

VORTEX AIR& AERONA3

CONTACT GRANT TECHNICAL TEAM

HYBRID OIL-FIRED BOILER WITH HEAT PUMP

Grant BSN full page advert Nov 2017:Layout 1 22/11/17 10:51 Page 1


With a depth of only 13cm, this streamlined, wall-mounted unitgives advanced levels of comfort in an elegant design, with satin-white, wipe-clean, modern composite surfaces. Its elegant design makes it the perfect solution for residential applications while it is also suitable for retrofit.

In many cases the i-LIFE2 Slim can replace existing radiators with simple connection to pipework, while radiators can be replaced individually or together. Each cabinet just needs in/out water supply from the heating system and a single-phase electrical connection. This can be wired in or via a standard 3-pin plug.

The elegant satin-white, wall-mounted cabinet is designed to

blend seamlessly into any setting, with a linear and sleek casing incorporating minimal lines and gentle curves. An automatic opening and closing system smartly manages the airflow from the deflectors at the top of the unit, helping ensure that heat is distributed evenly and quickly around the room.

At the heart of the i-LIFE2 Slim is an advanced heat exchanger with an extensive front surface. This ensures high airflows across the heat exchanger and a greater transfer of heat from the hot water pipes to the room. Each unit features advanced finger-tip control so temperatures can be moderated in separate rooms, making it easier to match individual needs. With a simple click, the desired

level of comfort can be achieved in a few minutes.

The i-LIFE2 Slim is packed with advanced controls and functions and incorporates the latest PID logic, making it quick to respond and ensuring that rooms comes up to temperature quickly. Thanks to its ultra-quiet variable speed fan motor, it provides perfect comfort in any room, quickly achieving the desired temperature without any fluctuation in noise.

i-LIFE2 Slim is also available in an inverter version with radiant panel. The brushless motor allows a perfect adaptation to thermal load, without any temperature fluctuations. Tangential fans operate through continuous air flow modulation with no speed steps or relay switching as with traditional fan coil units. High efficiency is guaranteed in any HVAC installation setup, in combination with any low temperature heat generator, and particularly when partnered with a Mitsubishi Electric Ecodan heat pump.

Features and benefits• DC motor with inverter technology with continuous speed regulation, to ensure the best performance with a very low noise level;• Elegant design and reduced depth of only 13 cm, for installation in a residential environment;• Tangential fan with asymetric blades that ensures the continuous modulation of the airflow for better comfort and real energy savings;• Coil with large frontal area that allows it reach high airflows with very low pressure drop;• Honeycomb polypropylene air filter that can be regenerated by washing or blowing;• Elegant cover structure that integrates the use of high-quality plastic materials, with traditional galvanised and epoxy powder- coated materials;• Configured for 2-pipe systems.

Contact: David McConnell, Heating Products Manager, Mitsubishi Electric Ireland. Tel: 01 – 419 8800; email: [email protected]

i-LIFE2 Slim radiators from Mitsubishi Electric i-LIFE2 Slim is the new Climaveneta fan-assisted radiator – with inverter technology for heating, cooling and dehumidifying – now available in Ireland from Mitsubishi Electric. This addition considerably strengthens the scope of the heating options offered by the company, especially as the i-LIFE2 Slim is ideal for connecting to air source heat pump systems.

The Stylish i-LIFE2 Slim assisted radiator blends harmoniously into almost any interior with exact comfort control.

Mitsubishi edit.indd 1 29/11/2017 08:54

THE MAXIMUM OF VERSATILITY

15 Year Warranty

Low Water Content

Faster Heat Up Time

Ideal For Low Temperature Systems

Low Energy Consumption

Corrosion Resistant

www.hevac.ieMuirfield DriveNaas RoadDublin 12

t 01 419 1919 | e [email protected]

Unit 1Furry Park Industrial EstateDublin 9


South Ring West Business ParkTramore RoadCork


Hevac Advert December 2017.indd 1 29/11/2017 10:05

Faral Alliance retains the focus on Italian design but these aesthetics are fashioned to complement any interior décor style. A unique and exclusive production process delivers the perfect finish that results in a synthesis of design, functionality and performance. Aluminium and technology combine to create harmony and comfort with surfaces that are tip-rounded, making for one of the most aesthetically-appreciated radiators on the market.

Apart from its aesthetic and performance values, aluminium is eco-friendly, hygienic and functional.

Scientific research confirms the benefits of aluminium heating radiators, endorsing the fundamental strengths that have always been at the core of Faral radiators. The benefits of aluminium radiators include:• Economical: It is economical not only at the time of purchase but also in operating costs thanks to the high thermal efficiency and flexibility of use;• Ecological: Aluminium is 100% recyclable and substantially limits the energy consumption with low operating temperatures;

• Hygienic: Low temperatures limit the air convective motions and so too the dust and dirt accumulation on the walls; • Easy installation: Installation is simple while controlling the various systems in the home is also easy.

Faral radiators are manufactured with the best alloy quality and are fully compliant with current European standards and regulations.

Energy savingRecently, the operating temperatures of heating systems have decreased considerably, thanks mainly to better construction standards and more efficient heat generators. The increased use of heat pumps and solar panels has also been an important factor. These influences mean that heating systems now operate, on average, at temperatures of around 40ºC/50ºC.

This scenario makes aluminium the ideal material for radiators as it has no rival to its exceptional characteristics of heat transfer. Faral radiators optimise these characteristics from the initial stages of the design to maximise the instant response in changes of the fluid temperature flowing through it. For these reasons aluminium is referred to as the best choice to reduce energy waste and to improve environmental quality.

The thermal output of Faral radiators is certified in accordance with the Regulations EN 442-2 and their sealing is guaranteed with materials free of harmful compounds. Faral Alliance radiators suit the needs of every home, integrate easily with home systems, and are practical and easy to install.

Contact: Dave Grenville, Domestic Heating & Plumbing Manager, Hevac. Tel: 01 – 419 1919; email: [email protected]

Faral radiators come with 15-year guarantee


Faral Alliance retains the focus on Italian design.

When Faral introduced the Tropical radiator model back in 1966 it revolutionised the domestic heating market and, since then, Faral has continued to lead the sector with innovative designs and standard-setting products. Faral Alliance is the latest development in this process. Made in Italy, it combines attractive design with performance excellence, and is ideal for modern heating system requirements.

Hevac edit.indd 1 28/11/2017 16:58


Newlands – Stephen Keating, sponsor of the BTU President’s Day with Mick Matthews, Winner Class 1 and Des Bindley, BTU President.

Newlands – Paudie Gillen who accepted the winner’s prize on behalf of Shaun Gillen with Des Bindley, BTU President.

Newlands presents stiff challenge This year’s BTU President’s Day was held at the splendid Newlands Golf Club, home club of BTU President Des Bindley who was on hand to welcome members and guests as they arrived. It was a fine Autumn day and, with the course in pristine condition, it presented a stiff challenge for all participants. Sponsor was Lynch Interact with Stephen Keating represented the company on the day.

Results were as follows:Overall winner: Shaun Gillen, 36 Pts.Class 1 Winner: M Mathews, 33pts; Second: J Lavelle, 31pts; Third: G Hutchinson, 28pts.Class 2 Winner: G Tobin, 33pts; Second: J Littlefield, 31pts; Third: L McDermot, 31pts. Class 3 Winner: D Mooney, 30pts; Second: V Broderick, 27pts; Third: J White, 26pts. Front 9: S Kiernan, 18pts; Back 9: M Kelly, 16pts; Visitor: B Sweeney, 31pts.

. n

BTU GOLF NEWS

The Grange lives up to expectations It is always a pleasure for the BTU to play The Grange and this year was no exception. The beautiful weather was complemented by the excellent condition of the course, and matched by the quality of the locker room, facilities and food.

Given that this is a championship course, Shaun Gillen’s score of 42pts was quite extraordinary. Sponsor for the outing was Versatile.

Results were as follows:Overall winner: Shaun Gillen, 42 Pts.Class 1 Winner: J Lavelle, 30pts; Second: C Lennon, 29ptsClass 2 Winner: S Kiernan, 29pts (Back 9); Second: M Bready, 29pts. Class 3 Winner: D Daly, 34pts (Back 9 ); Second: J. Warnock, 34pts. Front 9: P Gille 17pts; Back 9: V Broderick, 19pts; Visitor: S Higgins, 33pts.The Grange – Dave Daly, BTU Captain with overall winner Shaun Gillen.

The Grange – BTU Captain Dave Daly with Vincent Broderick, Back 9 winner.

BTU Golf.indd 1 29/11/2017 10:43

20 Building Services News l November/December 2017 ADVERTISEMENT FEATURE

To be the best, be with the best

Then there is the cost to the environment There is also another good reason for switching to energy-effi cient Grundfos pumps. If all pumps worldwide were replaced with modern, energy-effi cient pumps, we could reduce global electricity consumption for pumps from 10% to 6%.

This 4% reduction is equivalent to the annual power consumption of one billion consumers. This has tremendous implications for the environment, as the reduction in energy consumption translates into reduced energy production and consequently into reduced carbon emissions.

The Grundfos MAGNA3 circulator pump

If you think pumps are expensive, consider the cost of running them Pumps are everywhere, and modern living would be impossible without them. In fact, pumps consume 10% of all electricity produced globally.

The electricity consumed by pumps amounts to more than you might think. Here isan interesting fact: The purchase price accounts for 5% of the pump life-cycle cost (LCC), which is the total cost of buying and operating a pump throughout its service life. Service and maintenance account for 10% of the LCC. The remaining 85% of the LCC is the energy costs for running the pump.

This is one reason why switching to energy-effi cient Grundfos pumps makes sound business sense: With 85% of the LCC spent on electricity, and with energy prices on the rise, you can expect a quick return on investment. Moreover, once the investment has been written off, a reliable and energy-effi cient Grundfos pump will keep providing operational savings year after year.

Our experience indicates that two thirds of all pumps installed today are ineffi cient and use 60% more energy than energy-effi cient alternatives. Replacing such pumps can lead to signifi cant savings.

Grundfos DPS December 2018.indd 2 29/11/2017 09:37


How can we know that 85% of the pump LCC is spent on electricity? Because, as with any mechanical process, it is possible to measure pump effi ciency. Grundfos has developed two tailor-made tools for working out the electricity consumption of your pumping installation: the Energy Check consultation and the Pump Audit service.

Both tools are part of the Grundfos optimisation and consultancy portfolio of service offerings that are designed to optimise your pumping operations.

An Energy Check or a Pump Audit provides hard facts on the actual performance of your current pumps, as well as fi gures showing the potential benefi t of replacing them with energy-effi cient Grundfos alternatives. This gives you a rock-solid foundation for making sound business decisions that may considerably lower your LCC. In fact, LCC reductions mean that it will often be possible to achieve a very favourable return on investment.

Energy Check process and benefi ts An Energy Check is a FREE offering that gives you energy optimised replacement options for old constant-speed pumps. A Grundfos specialist visits your site and performs a non-intrusive pump survey based on the available data about your system.

All variables are noted, and you get a comprehensive report with estimations of the possible energy and fi nancial savings with new energy effi cient pumps. The free Energy Check is also a useful way of identifying candidates for the Grundfos Pump Audit process.

Benefi ts include• Exact overview of current pumping system costs and potential savings on running costs; • Improved environmental profi le of your facility; • Compliance with design standards for energy-using products.

Pump Audit process and benefi tsA Pump Audit is used to identify potential savings in replacing an existing pump set based on actual pump measurements. Using an ultrasonic clamp-on fl ow meter, pressure transducers, a power meter and a data logger, a Grundfos specialist records performance data and creates a load profi le for the pump.

You receive a report based on the load profi le comparing the operating economies of the existing pump and a replacement pump using specialised equipment and software. This report enables you to make a well-informed replacement decision ensuring maximum energy savings and system performance.

Benefi ts include• Accurate identifi cation of current pump operating effi ciency; • Considerable savings on running costs; • Signifi cant reductions to installation carbon footprint.

Grundfos Ireland Tel: 01 – 408 9800

email: [email protected] www.grundfos.ie

Grundfos Energy Management Team In 2012 Grundfos Ireland set up a specialist energy management team to promote energy awareness and help our customers save energy. Liam Kavanagh and Stuart O’Kennedy, graduates from energy engineering in GMIT and ITT, underwent extensive Grundfos training on pumps, systems, controls and energy management.

While energy effi cient pumps are an integral component in energy savings, we take a holistic view of the system, optimising pump selection, control and operation of the system to maximise savings. The unique and advanced functionality of the Grundfos Magna, E Pump and booster pump ranges are fully utilised to drive energy consumption down.

To date we have assisted customers from all sectors including hospitals, educational facilities, hotels and industrial manufacturing facilities to save millions of kW hours through pump system optimisation. In many cases our solutions qualify for SEAI ACA, Triple E and EEOS schemes and funding. Whether you are a consultant, contractor or FM company, the Grundfos Energy Check or Pump Audit services can help you save energy for your customers.

To fi nd out more about these services contact our engineers at Tel: 01 – 408 9800; email: [email protected] or [email protected]

Grundfos Energy Check and Pump Audit

Stuart O’Kennedy with Liam Kavanagh

Grundfos DPS December 2018.indd 3 29/11/2017 09:38


Garrett has been with Hevac for 20 years and his career path has very much mirrored the development and evolution of the company over that time. So, it is appropriate that he should now assume the role of Managing Director as Hevac embarks on the next next stage of its development.

Changing industry

“Our industry is changing and it is important that we move with it”, says Garrett. “The challenge is to focus on getting that right, based on an offer of value-for-money with quality, reliable products and unrivalled customer service. This includes everything from on-time, in-full deliveries to in-house technical design capabilities and after sales service support. We have recently streamlined pre-order and collection systems in an effort to make engagement with our trade counter staff more efficient, while also focusing on continual improvement of our comprehensive local and nationwide delivery service from our two Dublin- based branches and one in Cork.

“We have a dynamic team here at Hevac, and one that represents a wealth of experience within the business. In addition, we carry over 6,500 unique products in stock with thousands more available to order. Moreover, this figure rises to 11,000 given the ready access we have to the ex-stock product holdings of our sister companies Tubeco, Origen and Polytherm. We truly are a one-stop-shop for the heating, plumbing and mechanical services industry.

“An added strength of the close working relationship we enjoy with our sister companies is that we can supply the most comprehensive and efficient district heating system combination that includes boilers, CHP and HIUs, through to underfloor heating and distribution pipework. In recent years we have built on this capability to include full ‘design and build’ packaged plant room and flue installation services, along with a full AHU and ventilation product portfolio.

“This is delivered by Hevac’s dedicated specification design team of fully qualified and experienced building services and mechanical engineers which is led by Paul Devereux. Paul and the team ensure that design assistance, guidance and technical support are provided to our customers.

Customer focus

“As we look to the future, we are squarely focused on customer service. We truly appreciate every order we receive and we operate on the principle that customer satisfaction equals repeat business and we welcome every opportunity to prove ourselves in this regard”..

Garrett White has been appointed Managing Director of Hevac Ltd, one of the longest-established suppliers to the heating and mechanical services industry in Ireland. With a board of directors that represents over 130 years experience in the sector and a portfolio of quality, market-leading brands from all over the world, it is recognised as one of the foremost players in the industry.

HEVAC LOOKS TO THE FUTURE WITH GARRETT WHITE APPOINTMENT AS MD

APPOINTMENT PROFILE

Garret White.indd 1 29/11/2017 13:14

Given this emphasis on quality, Aircon only partners with brand-leading product suppliers. Panasonic is a prime example of this and over the years Ian and Vincent Mahony from Panasonic have worked closely on securing and executing a broad cross-section of commercial projects. One of the most recent is the Concentrix Call Centre in Belfast. This was a very challenging project but, by working closely together, consultants Beattie Flannigan, mechanical contractors Harvey Group and Aircon Contracts’ Manager Stevie McGarry devised and delivered the perfect solution.

The design brief was to provide

cooling to a new call centre located on the old Maysfi eld Leisure Centre site in Belfast. Cooling was required because of the shortage of electrical power to the site.

The electrical power requirement in the building was at a premium because of the nature of Concentrix’s business with an enormous power load needed for lighting, computers, servers etc.

This requirement was further compounded by the high sensible heat gains generated by the large volumes of computers and lighting, not to mention a staff complement approaching 1500 people.

The solution the team devised was

based on larger numbers of indoor units of a lower capacity being used due to the low ceiling heights, while just under 1.2MW of Panasonic DX gas fi red cooling was provided, using somewhere between 20kW and 25kW of electrical input. Full details of the equipment specifi ed were:• 155 Panasonic VRF cassette indoor units to serve all call centre and meeting room areas;• 13 Panasonic gas heat pump 3-pipe VRF outdoor units serving the indoors;• Five Panasonic gas heat pump 2-pipe VRF outdoor units to server AHU DX;• Panasonic centralised and full Modbus BMS control;• 19 Panasonic split Hi Wall systems to serve various small UPS and comms rooms;• Panasonic Air Off Control employed to provide a very high sensible heat ratio, 90%+;• All indoor units were sized to meet duty at medium speed.

The Concentrix was a very complex and challenging project requiring a sophisticated solution that was high-performing, cost-effective, energy-effi cient and 100% reliable. Between them the collective supplier, design and contracting team came up with the perfect answer and saw to its seamless installation and subsequent commissioning.

Aircon Sales and Service of Belfast delivers air conditioning design, supply, maintenance, installation and service solutions across all market segments. “Quality underpins our entire delivery model”, says Ian McFerran, Aircon Managing Director, “with professionalism and attention to detail the primary focus. Coupled with competitive and cost-effective pricing, the overall package we deliver sets us apart from other market players”.

Aircon delivers perfect data centre solution

Some of the Panasonic GHP units installed on the roof of the Concentrix building by Aircon Sales and Service of Belfast.


Aircon edit.indd 1 30/11/2017 09:54

Our products …

www.coreac.com

Core DPS advert July 2015:Layout 1 06/08/2015 10:29 Page 1

… speak forthemselves

(for everything else, speak to our staff)

Core DPS advert July 2015:Layout 1 06/08/2015 10:29 Page 2


Fergus Daly of sponsor Mitsubishi Electric with Kevin Roden.

Fergus Daly of sponsor Mitsubishi Electric with Matt Butler, overall winner.

The very successful RACGS programme for 2017 concluded on a high recently with a large attendance participating in the Mitsubishi Electric sponsored outing at Carlow Golf Club. This is one of Ireland’s oldest and most respected golf clubs and, as expected, it was in prime condition, despite the onslaught of Hurricane Ophelia just days before.

The spectacular setting was matched on the day by Matt Butler’s equally spectacular winning score, especially given that Carlow is a championship course.

As it was the last outing the season the Daikin Golfer of the Year was also announced with John Ryan deservedly collecting the trophy from Mitsubishi Electric’s Fergus Daly.

Fergus Daly of sponsor Mitsubishi Electric with Johnny Lynam.

Fergus Daly of sponsor Mitsubishi Electric with John Ryan, Daikin Golfer of the Year.

RACGS season concludes in Carlow on a high

RACGS Edit.indd 1 29/11/2017 10:41

Here we grow again …

AIR CONDITIONINGMHI Diamond 4pp December 2017.indd 5 30/11/2017 09:13

For more information, please visit www.mhiae.com call us on 0207 025 2772

or email [email protected]

*At 65°C water supply

e For mor

*A

en quiries @or email 02call us on

wwwinformation, please visit

t 65° C water suppl y

@mhiae.com207 025 277 2

.mhiae.comwDiamond Air Conditioning Ltd,

C5 Bymac Centre, Northwest Business Park,

Blanchardstown, Dublin 15. Tel: 01 – 636 3131;

email: [email protected];

www.www.diamondair.ie

Diamond Air Conditioning Ltd, C5 Bymac Centre, Northwest Business Park,

Blanchardstown, Dublin 15. Tel: 01 – 636 3131; email: [email protected];

www.diamondair.ie

Here we grow again …This year marks a major watershed, on two fronts, for Diamond Air Conditioning. On the one hand its market penetration and excellent sales performance now confi rm it as a major player in the commercial air conditioning and heating sector. On the other, and perhaps more signifi cantly, directors Michael Clancy and Graham McCann view this strong position as but the beginning of a whole new chapter for the company.

“There is no denying that we have come a long way in a relatively short period of time”, says Michael, “and that we have enjoyed considerable success, especially through our partnership with Mitsubishi Heavy Industries (MHI). However, while obviously very pleased with our progress to date, our focus is not retrospective but rather on the future.”

“As we approach 2018”, says Graham, “we’re thoroughly prepared for the next phase in our development. We’ve just taken possession of new, purpose-designed premises that include offi ces and a fully-fi tted-out Training Centre. We’ve implemented new management structures and operational procedures, taken on additional staff, and have a large portfolio of innovative MHI products that has just come on stream (see Back Page). We’re very excited for 2018 and beyond, and look forward to signifi cantly growing our business in partnership with MHI and our installer/dealer network.”

Annemarie Schaal, Sales Manager, MHI with Masayuki Fujinami, Managing Director, Mitsubishi Heavy Industries Air Conditioning Europe, and Graham McCann and Michael Clancy, Directors, Diamond Air Conditioning.

About Diamond Air Conditioning Diamond Air Conditioning was appointed over three years ago as the MHI distributor in Ireland for its extensive portfolio of air conditioning and heating products. Principals are Michael Clancy and Graham McCann who, between them, have 30 years experience of working with the brand.

The company provides nationwide coverage through a dealer network of specialist installers who are fully au fait with the MHI product range, and who regularly undergo training programmes and seminars on new product introductions delivered by Diamond Air Conditioning at its Training Centre.

Apart from the actual product ranges, Diamond Air Conditioning also provides design assistance and technical support. It works closely with the installer, consultant and client on all projects to devise the best possible solution, and to ensure that it is executed to deliver optimum performance, energy savings, and full compliance with all regulatory standards and requirements.

Apart from Michael and Graham, other team members and support staff include Elaine Ryan, Jennifer Clancy, Jennifer O’Connor and Alison McCann. Between them they handle all calls, accounts management and logistics queries, and direct themto the appropriate expert so that the matter is dealt with in a speedy and effi cient manner.

Jennifer O’Connor with Ali McCann, Jenny Clancy and Elaine Ryan.

ADVERTISEMENT FEATURE

71 Premier Business Park, Ballycoolin Road, Dublin 11.Tel: 01 – 636 3131

Email: [email protected]

MHI Diamond 4pp December 2017.indd 2 30/11/2017 09:13

Diamond Air Conditioning Ltd,

C5 Bymac Centre, Northwest Business Park,

Blanchardstown, Dublin 15. Tel: 01 – 636 3131;

email: [email protected]; www.diamondair.ie

On-time Site Delivery Logistics is a critical part of the service provided by Diamond Air Conditioning and it has partnered with Diamond Shipping to ensure that all orders are processed in a timely fashion to guarantee on-site delivery to the required location and at the specifi ed time.

Diamond Shipping is located close to Diamond Air Conditioning’s new premises and provides a full turnkey logistics service. It houses considerable stocks across the entire MHIbrand and processes all order fulfi llment via an automated system that is managed and controlled by Diamond Air Conditioning.

Ex-stock availability is assured as Diamond Shipping carries 250 rolling pallets of MHI products at any giventime. It also draws down product, and collects it directly using its own drivers and vehicles, from the MHI European logistics hub in Rotterdam.

When delivering to sites around Ireland all vehicles carry the Diamond Air Conditioning livery, while the drivers wear high-vis vests featuring the company’s logo. Deliveries are scheduled to suit the installation programme of the project in question, with next-day delivery guaranteed on all orders received before 12 noon on any given day.

Diamond Shipping personnel Krystian Wedrychowicz, Joe Finnegan, Director, James Goldrick and Gillian McCormack.

Q-Ton – an Industry First At a time when there is increasing pressure on the use of refrigerants with global warming potential, MHI has developed the unique Q-ton air to water heat pump that uses CO2 gas as a refrigerant. It also features the world’s fi rst two-stage compressor, combining rotary and scroll technology, and delivers maximum effi ciencies with minimal carbon footprint.

Q-ton heat pumps can be confi gured as stand-alone units or with up to 16 units in tandem, providing anything between 3,000lts to 100,000lts of safe hot water daily. Whether single or multiple units are used, the Q-ton system is controlled from a single, simple control panel that can be remotely installed for ease of access and operation.

It is suitable for a wide range of applications requiring the supply of sanitary hot water and is the perfect solution for new-build and retrofi t alike. It also facilitstes compliance with existing, and anticipated, energy and carbon-related standards.

MHI e-service MHI e-service is an application that enables users to make a quick search — by scanning the unit’s QR code – when trouble-shooting to understand the meaning of

codes that may appear. It also makes it easy to rectify any problems, or potential problems, that may be identifi ed.

The application covers MHI’s split (RAC & PAC), VRF, Q-ton and A2W ranges.

Easy Reckoner ‘Cheat Sheet’ While there is no denying we are in the electronic age, a large number of installers still look for a quick-reference printed document detailing the core MHI range, and all relevant information.

To satisfy this need Diamond Air Conditioning has produced a sturdy, laminated, single-sheet print-out detailing model numbers and related data such as capacity, decibel levels, weight, etc. This has proved extremely popular with engineers.

AIR CONDITIONING


www.diamondair.ie

Benchmark Innovations Feature Across New Ranges

SRK ZS Range

SRK ZS is the new range of wall mounted units ranging from 2.5kW to 11.5kW. They offer improved seasonal efficiencies, wireless remote with 7-day timer, ultra-low fan speed, night set-back and silent modes.

SRC ZSX Hyper Range The new SRC ZSX Hyper range features new hyper condensers, optimised refrigerant control, superior inverter boards, twin rotary compressors, low-resistance design of indoor unit and COP of 5.20.

SRK ZSX Hyper Range

These new wall mounted Hyper units range from 2kW to 6kW, offer seasonal efficiencies with SEERs of 7.60 on some models, silent operation mode, sound pressure down to 21dB(A) on certain models and night set-back function.

RC-EX3 eco touch

The RC-EX3 eco touch is a touch-screen controller providing full function control and more than 90 function settings. The data accessible includes refrigerant and air temperatures, compressor speed, and various operational data. This is very useful for service engineer

Draft Prevention Panel The new FDT-VG series of ceiling cassettes feature unique draft prevention panels that provide a comfortable airflow without any draft. Whether cooling or heating a room, the remote control can be used to instantly direct how airflow exits the unit and suppress any warm or cool drafts. It is the perfect solution for call centres and open-plan offices.

For full details contact:Graham on 087 – 950 9402orMichael on 087 – 262 0701



The Royal Hospital in Kilmainham was once again the prestigious venue for the presentation of the Sustainable Energy Authority of Ireland’s annual Sustainable Energy Awards. This is the 14th year of the Awards and the 2017 entrants to the eight categories demonstrated savings of over 27 million.

Commenting on the Awards, Jim Gannon, Chief Executive of SEAI, said: “The SEAI Sustainable Energy Awards are all about showcasing the excellent work that is happening around the country as businesses, communities and public bodies push the boundaries in energy efficiency and the switch to clean energy. This is especially the case where climate change is at the forefront of the news agenda, particularly as countries gather for climate talks at COP23 in Bonn right now. The 120 entrants to the Awards are playing their part and I commend the winners on their outstanding achievements in saving energy.”

The Awards were devised to promote excellence in energy efficiency and renewable energy throughout the island of Ireland and this year there were three category sponsors – Enprova (Public Sector); ESB Smart Energy Services (Large Business – Energy Management); and Gas Networks Ireland (Large Business – Energy Project).

Details of the various category winners follow.

SEAI Energy Awards highlight 27 million + savings

in energy costs

2017

Small Business: M50 Concession M50 Concession Ltd is a public/private partnership company that provides maintenance on the M50 motorway, and employs 23 people. It has installed power controllers which reduce the amount of energy used for lighting at set times of the night depending on traffic flows. This is a viable affordable alternative and an example of what can be done quickly to achieve significant savings. When combined with LED upgrades, it could prove to be a real game-changer in street lighting efficiency. The project has delivered 43% energy saving equating to financial savings of just over 300,000 annually.

Julie O’Neill, Chairperson SEAI with Sean Hollywood and Borja Santamaria, M50 Concession, and Jim Gannon, CEO, SEAI.

Community: Energy Communities Tipperary Co-Op

Energy Communities Tipperary Co-operative CLG brings 12 communities in Tipperary together in a co-operative to carry out deep retrofits on homes. The aim of the project was to save energy, save money, create warm homes and generate jobs. Its action has resulted in home owners benefitting from higher levels of comfort, with 4 million generated in energy cost savings to date.

The project brings together rural communities with diverse backgrounds and needs, and focuses on what can actively be done to mitigate climate change one step at a time. This approach could easily be adopted by other rural communities.

Aileen Campion, Liam Lynch and Marcella Maher Keogh, all of Energy Communities Tipperary Co-Op, winners of the SEAI Community Award.

SEAI Awards edit.indd 2 29/11/2017 09:33

Dublin: +353 (1) 630 5757Belfast: +44 (28) 90 36 55 55


Quality System Solutions for large domestic and commercial boiler projects


C&F Quadrant is one of Ireland’s leading suppliers of heating and plumbing products with a portfolio of market-leading brands catering for both commercial and domestic applications. With offi ces in Dublin and Belfast, and a network of regional representatives and merchant trading partners, comprehensive all-Ireland coverage is assured.

Complementing and supporting the extensive product portfolio is a team of highly-qualifi ed, engineering-led, personnel. Experience runs to the core of C&F Quadrant with long service commonplace at all levels, from trade counter personnel through to technical support, fi eld sales engineers and back-up administration.

This long-service feature is mirrored in the long-standing trading relationships it enjoys with many of its suppliers, some of which date back 20, 30 and even 40 years. Those currently in the portfolio are ACV, Bosch, Coster, Flamefast, Unical and Vaillant.

Boilers from all brands represented are listed on the SEAI Triple E Product Register and qualify for the Accelerated Capital Allowance Scheme.

Brief details of all are as follows.

Included in the C&F Quadrant portfolio is the

Coster range of energy control products that offers solutions for the automation, control and management of heating and air conditioning sites.

The Coster product mix covers:• Automation of boilers and burners;• Heating;• Thermostatic mixing valves;• Air conditioning;• Gas safety/alarm systems;• Valves/actuators;• Controllers and instruments for various uses;• Energy metering and allocation of charges.

Flamefast gas sensors are suitable for use with a wide range of gases and applications. They can be interfaced with a Flamefast GasGuard System or Building Management System using its digital and analogue outputs, as well as being able to connect into much larger systems with a multi-channel controller.

This high-specifi cation and cost-effective gas detection solution offers complete protection from gas leaks and is ideally suited for both industrial and commercial applications.

C&F Quadant offi ce and warehouseheadquarters in Dublin

Email: [email protected]&F DPS December 2017.indd 2 29/11/2017 10:13


www.cfquadrant.ie

Excellent products supplied and supported by C&F Quadrant Prestige wall hung boilers from ACV comprise an extended range of four models, in sizes 50kW, 75kW, 100kW and 120kW, and incorporating ACV’s unique, self-cleaning stainless steel heat exchanger.

Prestige boilers can be installed in a cascade from two to eight units with a maximum combined output of 920kW. A cascade installation greatly improves the system efficiency and fuel usage, resulting in reduced running costs and lower emissions. There is also an integrated non-return flue valve to make fluing options easier.

Installation and maintenance is simple as all parts are serviceable from the front of the unit, while the ACVMAX® system control also has an easy menu structure.

Bosch has specialised in commercial and industrial boiler construction for 150 years, using innovation, quality and performance efficiencies to establish industry benchmarks others have sought to emulate. Bosch commercial boilers have a very strong presence in Ireland, thanks largely to its long-standing partnership with C&F Quadrant, who have been distributing and supporting the brand for 40 years.

Today’s Bosch portfolio includes energy-efficient cast iron boilers, and stainless steel and condensing boilers for commercial heating solutions. A typical example is the Buderus GE range which can achieve up to 92% NCV with low-flue gas temperatures and effective all-round thermal insulation. Easy to install and maintain, the cast iron boiler sections can be transported and supplied separately for assembly in the plant room.

The Unical rModulex EXT enbloc modulating boiler has flexibility as its key advantage and comprises 12 gas condensing models with outputs from 100kW to 900kW. With a cascade installation, the boiler output capacity can be widened to over the 900kW range.

Modulex EXT delivers a certified efficiency up to 109% at the minimum modulated capacity. Seasonal efficiency is +30% when compared with conventional boilers, while the inimitable modulation ratio is up to 1:40. There is also a modulating pump directly managed by the boiler to ensure the maximum condensation at all regimes.

These levels of output are matched by simple installation. Not only is outdoor installation possible with a protection degree of IPX5D, but the compact and light construction makes it easier to manoeuvre.

Lightweight for its class and with a compact design, the Vaillant ecoTEC wall hung boiler can be sited almost anywhere. This versatile condensing boiler includes a comprehensive range of flues, fittings and accessories, and is available in five output ranges – 46kW, 65kW, 80kW, 100kW and 120kW. It is fully compatible with Vaillant’s range of intelligent eBUS controls and has flue lengths up to 24m concentric.

C&F DPS December 2017.indd 3 29/11/2017 10:13


Large Business Management Programme: Dairygold Dairygold’s energy management programme is founded on the international energy management standard ISO50001 and it has received certification for two processing sites in Mitchelstown. The standard is extensively utilised to drive the ongoing development of the energy management programme and to identify energy saving-projects for investment. To date Diarygold has implemented numerous projects, including the largest biogas boiler installation in Europe. Most of the projects carried out were relatively low-cost while delivering a quick payback. Annual energy savings of 7.67GW and 300,000 in cost savings have been achieved to date.

Julie O’Neill, Chairperson SEAI with John Walsh, ESB; Gabriel Kelly and Daire McKeirnan, both of Dairygold.

Large Business Project: Astellas, Kerry Plant

Astellas Ireland is a pharmaceutical company that manufactures a range of health treatments which are distributed globally from Kerry. Astellas has applied the Energy Efficient Design Standard IS399 approach, which considers potential opportunities to maximise energy saving benefits from the start of new investment projects. This minimises energy consumption through the project lifecycle. It has applied the standard to three projects to date – a canteen expansion, a compressed air upgrade and a chiller plant upgrade. Collectively, these projects have delivered annual energy savings of 1.7GWh and

135,000 cost savings. A further six projects are currently underway.

Photo shows Fran McFadden, Gas Networks Ireland, with Colm Timmons and Tim Moroney, Astellas.

Public Sector: National Ambulance Service The HSE’s National Ambulance Service has undertaken a Green Technology Initiative in its fleet of emergency ambulances. It has reduced fuel use and emissions through driver

behaviour changes, an eco-anti-idle system and built-in solar PV systems which fully charge the vehicles’ equipment while parked up on call. To date, savings of over 750,000 have been achieved.Paddy Sweeney, Enprova with Julie O’Neill, Chairperson SEAI, Pat Grant, Nicola Lawlor and Martin Dunne, National Ambulance Service.

Energy Team of the Year: WIT WIT is the first Institute of Technology to achieve the international energy management standard ISO 50001. This supports organisations in all sectors to use energy more

efficiently through the development of an energy management system. WIT has exceeded its public sector 33% energy saving target, having achieved over 36% to date, and has made cost savings of over

300,000. A team of WIT staff and students working together have driven the project and they continue to enable staff and students to bring energy to the agenda of everyday life at WIT, as well as in their homes.Elaine Greenan and Elaine Sheridan, WIT.

Research: Exergyn Exergyn research is based on developing an engine to convert hot water to power. It is expected to be the only zero emission generator that can deliver reliable low-cost power whenever it is needed and could solve many of the world’s energy problems. Exergyn had to design a test apparatus to test the endurance of the engine material to prove the fatigue-life of components as well as the engine itself. A full-scale trial engine is almost ready for testing.Georgiana Tirca and Alan Healy, Exergyn with Jim Gannon, CEO, SEAI.

Design: Durkan Residential Durkan is a Dublin-based private housing developer who has focused on developing cost-effective methods for building energy- efficient houses. It has built the largest certified Passive House development in Ireland at its site in Citywest. Each house takes only 12 weeks to build and is extremely cost-effective to run. The 58 houses meet Ireland’s 2020 Near Zero Energy Buildings (nZEB) targets for performance and surpass the proposed Building Regulation standards for energy efficiency and renewable energy.

Julie O’Neill, Chairperson SEAI with Barry and Kevin Durkan, Durkan Residential.

SEAI Awards edit.indd 3 29/11/2017 09:34

BSS Boss Advert December 2-17.indd 1 29/11/2017 10:14


BOSS X-POT …the next step in evolution Renewing an existing and inefficient boiler plant by upgrading the boilers, pumps and other ancillary items will inevitably increase energy efficiency, lower running costs, cut maintenance expenditure and generally improve performance of the system. However, including the BOSS™ X-POT side stream filter and dosing unit within the system delivers even greater efficiencies

Recipient of the H&V News, Commercial Building Services Product of the Year 2015, the BOSS™ X-POT helps in cleaning up the existing pipework, radiators and fan coil units, and offers an extensive array of benefits that include removal of air and system microbubbles, which reduces oxygen levels within the system water.

It also captures and removes magnetic and non- magnetic suspended solids down to an industry best 0.5micron via the twin filtration of magnetic grate and the non- magnetic cartridge filter (BSRIA BG29/2012 Guideline is 5 micron). Furthermore, the BOSS™ X-POT can be used as a dosing pot to simply add water treatment chemicals to the system.

The BOSS™ X-POT range caters for <4Bar right up to 25Bar maximum working pressures, so there is a model for all system sizes and pressure ranges. The BOSS™ X-POT performance far exceeds standard plant items such as dirt and air separators, dosing pots and magnetic filters, which are limited to removing system debris down to 30 microns. Furthermore, the value added engineering cost savings of the BOSS™ X-POT are circa 50ºC over and above the standard items on this project.

When the new boiler room in a refurbishment project begins to take shape, the BOSS™ X-POT is installed across the main system pumps. It simply works by using the differential pressure of the system pump to push a small percentage of dirty system water, in line with BSRIA Guidelines, into the unit through the twin filtration chamber. The cleaned system water is then returned into the negative side of the same pump. It’s simple and very effective.

Once the new boiler plant is commissioned, the system is turned on to connect to the whole building. Inhibitor can be added via the BOSS™ X-POT to give extra protection against further corrosion and to inhibit any formation of scale on any existing plate heat exchangers.

The ideal inhibitor is the super concentrated BOSS™ X-POT commercial inhibitor. It not only protects systems up to 90°C, but is also BuildCert Approved, sanctioned by many boiler manufacturers, and has been specially formulated with in built polymers to slowly lift settled corrosion debris in low flow areas and transport them back to be captured by the BOSS™ X-POT. The combination of these give increased performance and energy efficiency to heat emitters. Contact: BSS Group (Ireland). www.bssireland.ie Tel: 01 – 416 5100; email: [email protected]

BOSS™ X-POT delivers full side stream filtration, and all in a dosing pot.

The Boss X-POT compact side stream filter.

BSS edit.indd 1 29/11/2017 10:23

Formal presentations were brief and focussed, the content and delivery style designed to educate, and to stimulate thought, ideas and

discussion. They were also quite diverse and covered everything from nZEB through to innovative product development, new refrigerant gases

and related legislation, and heat pump and boiler evolution.

The common theme throughout the day was Design Thinking, and Daikin had engaged a team of professionals in this field to coordinate the proceedings. While Design Thinking is now a very sophisticated concept that is being applied more and more across all business sectors, this was a first for a building services-related event in Ireland. Rather than dwell on the academic explanation of what Design Thinking entails, suffice to say that the embodiment of what it means is in the name … it literally does do – and did at this event – what it says on the tin.

From when delegates arrived they were encouraged to engage in a simple but very effective process that involved putting thoughts and ideas on post-its. These were then collected and collated and used to further stimulate and engage the delegates over the coffee breaks, the lunch, and finally for the final workshop session.

Here delegates divided into teams of five and “brain-stormed’ to come up with ideas, concepts and initiatives that could be rolled out to the public at large to explain the social, health, energy and lifestyle benefits of the products and systems now being introduced by the industry. On completion of this exercise a representative from each team had to present their idea to everyone present. Delegates then voted to select the best idea with the winning team securing a stay at Cliff at Lyons.

The whole concept worked extremely well with delegates seamlessly engaging and participating in the process, and with some excellent results. Even more beneficial is that, while the day itself came to a conclusion, Daikin regards it merely as the start of a process. The findings and suggestions from the day are currently being collated and evaluated, and they will shortly be shared online and through similar functions that will see the Daikin-led Home Energy Innovators Forum concept develop and grow.

Daikin Home Energy Innovators Forum proves huge success


Calin Tasnadi, Dakin Ireland with Hervé Pierret, Daikin Europe, Michael Hanratty, IHER Services and Ian Killoch, Daikin Ireland.

Cliff at Lyons was the prestigious venue for a unique initiative called Home Energy Innovators Forum organised by Daikin Ireland early in November. The occasion comprised a day-long programme of networking, presentations, workshops and interactive modules designed to embrace the collective views of invited delegates made up of architects, consultants, local authority representatives and installers. Hosts on the day were John O’Shaughnessy, Calin Tasnadi, Shane McCarthy and Ian Killoch.

Shane McCarthy, Daikin Ireland with Graham Wright, Daikin UK, JohnO’Shaughnessy, Daikin Ireland and Daniel Berberich, Daikin Europe.

Daikin edit.indd 1 29/11/2017 08:56

Diseases such as cholera, for example, aren’t a thing of the past. For millions around the world cholera is a disease that is still prevalent and capable of killing in a matter of days. The World Health Organisation estimates that up to 143,000 deaths are caused every year by this bacterial infection.

It’s the 21st century and no-one should die from ingesting or washing with contaminated water. Yet so many people still have inadequate

access to safe water and sanitation facilities. What’s more, as large sections of the population are displaced by severe conflicts, such as those happening in Syria and Burma right now, illness and death from water-based diseases are likely to increase.

It is against this background that Xylem founded Watermark, a programme dedicated solely to providing safe water resources for communities in need around the

world. Using Xylem’s expertise in solving water-related challenges, the company has already helped thousands of people and educated thousands more. Projects have ranged from providing water access to schools and communities in remote areas, to emergency response efforts during natural disasters.

Xylem concurrently introduced Waterdrop, a scheme designed to involve customers in the work being carried out to support people in need around the world. As a member of the Waterdrop scheme, customers collect points, or “drops”, by learning about, selecting or specifying Xylem’s products or services for commercial building services applications.

For every drop collected, Xylem donates 1US Dollar towards the construction of water towers for communities. Each drop also enters customers into a draw. The prize? To become part of the volunteer team that builds and installs these towers at various locations around the world.

Xylem’s first trip saw 14 volunteers travel to the Philippines to build two water towers for 2,000 children and their families. Each tower delivers 10,000 litres of drinking water a day.

Since Waterdrop was launched, the business has collected enough “drops” to fund 28 million litres of clean water, and provided 5,000 people with access to potable drinking water. Xylem urges all of its customers to join the Waterdrop loyalty scheme and start making a difference to lives around the world. Signing up is simple … log on to www.xylemwaterdrop.com for full details.

Contact: Kevin Devine, Business Development Manager, Xylem Water Solutiuons Ireland. Tel: 01 - 452 4444; Mobile: 087 – 757 7411; email: [email protected]

38 Building Services News l November/December2017

Xylem’s Watermark and Waterdrop schemes bring life-saving water In rich developed countries like Ireland access to clean running water is something that we take for granted. This isn’t the case everywhere. In fact, one person in nine worldwide lacks access to safe drinking water. The consequences of this can be fatal, with around 50ºC of hospital beds worldwide currently occupied by people suffering from water-based diseases.

Community members enjoying the fruits of a Xylem Waterdrop project.

Xylem edit.indd 1 29/11/2017 10:24

The Campion Pumps’ headquarters is located in Gortnahoe, just off the M8, a central location that allows it reach most areas throughout the country in under two hours. However, to better serve the growing volumes of business in the greater Dublin region, it recently opened a purpose designed office, workshop and warehouse complex at Unit 56, Broomhill Drive, Tallaght, Dublin 24.

There was a very large turnout for the official opening with a mix of installers, specifiers, housebuilders, industry personnel and representatives from its supply partners attending on the day. It was a celebratory occasion but with the added value of a whole programme of CPD seminars. Customer flow-through is already quite significant and this new Dublin outlet will see Campion Pumps consolidate and grow its market presence into the future.


Campion Pumps is a 100% Irish-owned company that has seen considerable year-on-year growth since it was established in 1988. It supplies, installs, services and maintains a full range of water and waste water pumping stations nationwide to a customer base spread across the industrial, commercial and domestic markets, as well as local authorities and group water schemes.

Right: Lisa-Jane Mears, Hanley Pepper with Alan Campion and Padraic Keating, Hanley Pepper.

Below: PJ Ryan, Campion Pumps with John Quigley, Xylem Area Sales Manager, Martin Campion, Campion Pumps, Eric Le Guern, Xylem Regional Director Western Europe, Duncan Lewis, Xylem, Managing Director, UK & Ireland, Alan Campion, Campion Pumps and Austin Kennedy, Xylem, Head of Sales & Operations, Ire/NI.

Campion Pumps opens Dublin Outlet

Above: Martin Campion with son Michéal, wife Catherine, and Duncan Lewis, Xylem Water Solutions, Managing Director, UK & Ireland having performed the official opening of the new premises.

Right: Colm Caffrey, Cairn Homes with PJ Ryan, Campion Pumps and Donal Stenson, Cairn Homes.

Campion edit.indd 1 29/11/2017 10:33

Intelligent remote control for heating andcooling systems

BUILDING AUTOMATIONCONTROL TECHNOLOGYSENSOR TECHNOLOGY

Smart control withb@home

Smart control for smart peopleWith the b@home system by alre, it is possible to control and monitor your heating and cooling systems at any time and from any location. Regardless if you’re using your smartphone/tablet app or standard browser – the intuitively straightforward operation permits individual or central regulation of rooms.

It’s also very easy to operate the b@home system with a remote control – if you are not at home either externally via the internet or locally via your home network. These control options that you can choose according to your requirements not only offer the highest level of comfort, but also improve energy consumption.

The b@home gate is the key component of the b@home system and serves as an interface between the alre wireless system and the WLAN/LAN router. It is possible to upgrade exisiting alre wireless systems. The optional b@home control unit provides central access to all channels and heating/cooling zones. It can be used as a central or room control unit and is compatible with all common switch programs.

Easy-to-follow instructions provide for simple installation and quick setup of the b@home system.

FREE APPS

Manotherm DPS December 2017.indd 2 29/11/2017 10:15

All options and advantages at a glance

1

2

4

5

6

3

Gate

electrical heating

2

electrical heating

3

Cooling ceiling

51

Radiator

4

Infrared heating mobile Radiator

6

Intelligent solutions for intelligent buildings

The Controls Centre,

4 Walkinstown Road, Dublin 12.

Tel: 01 - 452 2355/452 2229 Fax: 01 - 451 6919

email: [email protected]

www.manotherm.ie

Programme and control any heating and/ or cooling system from any location.

Up to 32 rooms or hot/cold zones.

Fast and easy commissioning.

Simple and easy to use.

Individual room control.

Suitable for all heating types – radiators, electric, underfloor, heatpumps, radiant panel.

Can be used on all platforms – Windows, Android and iOS.

Works offline with no loss of functionality.

Easily expandable to 32 zones without large outlay or onsite works.

Free apps, no follow-up costs such as monthly subscription fees.

Very simple to retrofit with little or no set up costs or disruption.

German engineeredto the highestEuropean standards

Manotherm DPS December 2017.indd 3 29/11/2017 10:15

The event was over-subscribed with 100-plus delegates representing senior management from leading Irish-based contractors and consulting engineers participating. The presentations and discussion sessions covered everything from developments in building performance through to the process of design and innovation, and ultimately the delivery of quality projects, efficiently and cost-effectively.

The proceedings began at mid-day with registration, networking and a light lunch before Greg Hayden, ACEI and Ethos Engineering, gave the opening address after an introduction by Jim Curley, M&ECA and Jones Engineering.

Meeting Clients’ Expectations – A Public Sector Client’s Perspective was the topic of Jim O’Sullivan’s presentation. Jim is Assistant Chief Engineer for M&E, OPW and he gave a very honest appraisal of the difficulties the OPW has in engaging with consulting engineers and contractors. His detailed analysis highlighted the key challenges, but also included the positives that could be built on. He acknowledged that while the engagement process can be sophisticated and convoluted, the objective must be to make it simple.

Changing Dynamics and the Private Sector Delivery Process was the topic addressed by Denis Browne, EU Regional Data Centre Lead, Google. Denis reflected many of the sentiments Jim had expressed, but perhaps in a more direct, “no holds barred” manner. He was critical of the lack of pride in the sector, the limitations with the learning/teaching

processes, and the failure of the industry to listen to, and value, the opinions and views of crafts people. He challenged those present to devise a more efficient delivery model, particularly in the data centre arena.

Other topics and speakers featured included The BIM Challenge by Darragh Canning, Arup; Achieving Compliance under the New Regime by Brian Kavanagh, Garland; Preparing for NZEB – The Energy Debate by Chris Hughes, SEAI; and Advancements in Energy Storage Technology by Neil Primrose, Eaton.

The conference was followed by a reception and gala dinner in the Killarney Plaza Hotel that evening at which the networking and sharing of ideas continued well into the early hours.

This inaugural event was a major success on the day but, what’s more important is that it has kick-started a process that will contribute enormously to the future well-being of the industry. A benchmark has been set for an honest appraisal of the current delivery model and it is the responsibility of all parties – clients, consultants and contractors – to build on this. Roll on the next event.


Sean Downey, Director, Specialist Contracting, CIF with Michael Kennedy, Suir Engineering and President, ECA and Greg Hayden, Ethos Engineering and ACEI.

M&ECA and ACEI show route forward with joint conference The ACEI and M&ECA set the template for future industry collaboration recently with the format of their inaugural joint conference on building services in Killarney. The programme was dynamic and innovative, with the entire event designed to facilitate and encourage networking, and the sharing of ideas and opinions.

M&ECA and ACEI edit.indd 1 28/11/2017 17:02

Ciara Ahern, the Head of Building Engineering in DIT says: “The buildings in which we spend 90% of our time are responsible for about half of global energy use. Society urgently needs building engineers to help realise our ambitious climate change targets for our built environment.”

DIT and Sirus have joined forces to introduce the inaugural Sirus Scholarship in Building Engineering 2017. The scholarship was established with James Byrne, a DIT graduate and his colleague Frank Caul, who joined forces in 1989 to form the very successful Sirus Group. It employs approximately 100 people, many of them building engineering student graduates from DIT, and operates across Ireland and mainland Europe.

The Sirus team specialises in the control and management of building systems across a diverse range of sectors including industry, education, retail, hospitality, healthcare, life sciences, data centres and airports. “Sirus is always looking for good people”, says Frank Caul, “and we prefer to employ the graduates from

Building Engineering in DIT as they are able to hit the ground running and contribute to the company quickly. These graduates invariably climb the career ladder very quickly.”

The two talented students awarded this year’s Sirus Scholarship are Zoe Elliott, from Newtownmountkenndy, Co Wicklow and Pauric O’Connell, from Virginia in Cavan. Both are third-year students of Bachelor of Engineering (Hons) in Building Engineering (Course code: DT026) at DIT.

DIT has an open access policy to education and allows students access the system at apprenticeship level, and without honours maths. “If you want in, there is a way in”, says Ciara Ahern. “Some of our best students are those who access the system at apprenticeship level and ordinary degree level”.

“Stick-with-it” attitudeJames Byrne is an excellent example of this, starting off his career as an apprentice plumber in DIT. “This is why we set up the scholarship based on the attributes of grit and perseverance, rather than academic merit”, says James. “At the end of the day it is a ‘stick-with-it’ attitude that gets you through tough times in education, business and in life in general.”

To support the initiative Sirus also donated a state-of-the-art recirculating air conditioning teaching system to the college which DIT is excited to put into use.


DIT’s Bachelor of Engineering in Building Engineering is a unique course designed to attract students to fill the strong industry demand for building engineering graduates.

Sirus Building Engineering Scholarship at DIT

Frank Caul, Managing Director of Sirus with scholarship winners Zoe Elliott and Pauric O’Connell, and James Byrne, Chief Executive Officer, Sirus.

Sirus edit.indd 1 29/11/2017 10:26


Today, more than ever, building owners – and consequently specifying consulting engineers and mechanical contractors – realise that indoor comfort is not just about air quality and temperature control, but also about creating low-noise comfortable environments.

Creating solutions that meet all of these criteria is a major challenge but one that Lindab Ireland can fulfil thanks to its top-quality Caice fan coil units and innovative Koolair grilles and diffusers range.

Lindab Ireland brings the benefits and strengths of the vast resources of Lindab Group to bear when devising project solutions, and complements them with engineering input from its own team to ensure they are tailored for climatic conditions in Ireland.

Integral to all solutions developed is performance excellence, energy efficiency, long life cycle and critically, low noise. This is often neglected by other solutions providers but something that Lindab regards as essential when creating the perfect indoor comfort zone.

Lindab Koolair Partnership The Koolair Group specialises in the manufacture of air diffusion and distribution products and is renowned for the design, development and innovation of its extensive product ranges. The partnership between Lindab Ireland and Koolair utilises these resources and has resulted in an innovative range of diffusers designed specifi cally for the Irish market. These are all tested and verifi ed for performance and regulatory compliance at the R&D and innovation laboratory at Koolair Headquarters.

A typical example of the pioneering products within the range is the DFRA-OV-PR adjustable blade swirl diffuser with hinged perforated face. The 1200mm x 300mmface is highly aesthetic and perfectly matches the supply and return diffuser models. It functions with a high induction rate which results in lower velocities in the occupied zone but with high unit fl owrates.

Lindab Ireland is part of the highly-acclaimed Lindab Group that develops, manufactures, markets and distributes products and system solutions for ventilation and HVAC industries

www.lindab.com

Indoor comfort also means superior aesthetics!

Lindab Fire Damper Range Lindab Protect is our range of ventilation fi re protection systems offering greater safety in ventilation systems. Solutions which we havedeveloped in order to protect property – and save lives. Our range of Fire Smoke Dampers is fully certifi ed to EN15650,EN1366-2,EN-13501-2,EN10294-4 & EN1751. We have a CIBSE certifi ed CPD available.


Libdab DPS December 2017.indd 2 30/11/2017 17:06


Koolair DFRA-C Swirl Diffuser The Koolair DFRA-C fi xedblade swirl diffuser, complete with Coanda plate, is a popular option for exposed ceiling applications.

The overall collection of swirl diffusers, grilles and bespoke air terminals is ideallycomplemented by thermally adjustable diffusers that can be installed in heights up to 12m, with airfl ows up to 1 m3/s. There is also a variety of linear slot diffusers with adjustable throws, curved and continuous lengths that can be integrated into any ceiling type.

Lindab Design Support Koolair has an advanced, modern set of web-based programmes that can be used to select models, verify velocities, temperature gradients and air distribution patterns for its entire portfolio. These include the following:

Quick Selection TableQuick product selection software

Komfortair 3DAir to air product selection software with 3D fi gures

Komfortair-waterAir to water product selection software

Lindab Delivers Ultra-quiet Fan Coil Units Caice is an award-winning manufacturer of quiet, energy effi cient attenuators and fan coil units. Its powerful fan coil units provide air-conditioning for offi ces, hotel rooms and residential apartments, the fl exible modular design allowing components to be added to suit specifi c project requirements. An added advantage is the compact construction which makes it ideal for installation within ceiling or fl oor voids. Features and benefi ts include:• Modular concept allowing for easy design redevelopment, integrated attenuator options;• Low installation heights;• Noise levels as low as NR25, guaranteed acoustic performance;• 0-10V infi nitely variable controller on EC models;• Optional Trend controllers and PICV valves;• BMS compatible;• Published test data to BS 4856;• BIM models available for entire range.

Lindab Ireland, Unit 2B, Nangor Road Business Park,

Nangor Road, Dublin 12.Tel: 01 – 456 8200Email: [email protected]

www.lindab.com

Libdab DPS December 2017.indd 3 30/11/2017 09:53


There were also presentations from Region XIV DRC Costas Balaras, CIBSE Vice-President Kevin Kelly, and Engineers Ireland Chair for the Energy and Environment Division.

With the assistance of a generous student fund from Daikin Ireland to

support students in their studies, three new ASHRAE student branches have been formed in Ireland. Professor Olesen and Dr Balaras joined the ASHRAE board, students and staff to inaugurate two of the new branches at University College Dublin and the Dublin Institute of Technology.

ASHRAE Past President Tom Watson also visited Ireland recently to meet with the students at the Cork Institute of Technology where he inaugurated another ASHRAE Student Branch. This was followed with presentations on refrigeration from Tom and Seamus Kerr of The Institute of Refrigeration Ireland.

NEW ASHRAE CHAPTER AND THREE NEW IRISH ASHRAE STUDENT BRANCHESASHRAE President, Professor Bjarne Olesen, visited Ireland recently to officially inaugurate the new Chapter and give his presidential address to members and delegates at Engineers Ireland.

ASHRAE President Professor Bjarne Olesen

ASHRAE Ireland President Dr Simeon Oxizidis, President Elect, Dr Donal Finn, Secretary, Dr Daniel Coakley and Region XIV DRC Dr Costas Balaras.

Seamus Kerr, President of Institute of Refrigeration Ireland.

Inauguration of the ASHRAE Student Branch at Dublin Institute of Technology.

ASHRAE edit.indd 1 29/11/2017 10:35


For instance, increasing fresh air

rates from 12 l/s to 24 l/s per person

has shown to reduce short-term sick

leave by 35%.

FläktGroup’s Optivent® is a trusted

line of VAV dampers that have

been optimised with the latest

cutting-edge innovation to tackle

this challenge. With advanced airflow analysis based on ultrasound technology, the new Optivent® Ultra heralds a new dawn for demand controlled ventilation (DCV). It is a landmark innovation that eliminates the traditional problems such as noise, turbulence and pressure drops in the airflow that beset VAV

dampers. Dust build-up affecting measuring precision, contaminating the air and requiring maintenance is also addressed.

A demand-controlled ventilation (DCV) system detects momentary demand on ventilation and adapts to provide what’s needed – no more, no less. Doing so requires precision and flexibility from both system and components. Optivent® Ultra as a variable air volume damper fits at the heart of any DCV system, adding further comfort benefits to the installation.

Unique to Optivent® Ultra it that it has adapted ultrasound to analyse the airflow inside a ventilation duct. Precise sensors and algorithms give a very detailed image of the air stream by studying how sound waves are affected by the moving air.

Measuring airflow in the system by means of ultrasound is more precise than traditional pressure sensors. Over time these collect dust and that build-up affects both precision and pressure drop, causing unnecessary energy costs. It also calls for more maintenance. Without physical sensors, ultrasound lowers this maintenance cost too. Moreover, when ductwork is brushed for regular cleaning, ultrasound sensors are completely unaffected.

Employing demand-controlled ventilation is a smart way to save energy and deliver excellent indoor air quality. When air is adapted to supply momentary demand in this way, energy can be saved without any sacrifice.

The trick is to sense demand in temperature and CO2 levels and to adapt the ventilation accordingly. This is precisely what Optivent® Ultra does.

Contact: Gavin Power, Sales Manager, Flakt Woods Ireland. Tel: 01 – 463 4600; Mobile: 086 – 826 3058; email: [email protected]

Optivent® Ultra – innovative solution for DCV for indoor air quality and comfort Today people spend over 90% of their time indoors in buildings that are becoming more and more airtight to reduce energy consumption. This means well planned ventilation and indoorair quality is more important than ever before, not just for comfort reasons, but also to enable people to perform to their best, to get well sooner in hospital and to be more productive at work.

FläktGroup Optivent® is a trusted line of VAV dampers that have been optimised with the latest cutting-edge innovation.

FlaktWodds edit.indd 1 29/11/2017 10:31

Traditionally for commercial applications, the PAC single-split and multi-split combines up to four matching indoor units with a single outdoor unit and can be simultaneously operated with a single remote control.

The new highly-efficient technology, combined with longer piping, contributes towards vast energy saving and environmental protection.

The new outdoor units provide a price-competitive solution and show

excellent improved cooling and heating capacities of up to 15.5kW, with nominal heating capacity for the 14kW outdoor unit.

With its industry-leading small unit size, the single-fan outdoor units are very easy to transport and install. Low outdoor unit noise levels and increased height differences between the outdoor and indoor unit of up to 50m make the updated range a great fit for many different applications where space and installation flexibility is of the essence.

With a vast amount of different indoor units available and a new

connection for the recently-introduced 10kW MHI SRK wall-mounted unit, the number of possible applications is greatly increased.

In addition, the new premium inverter FDC-VSA range boasts higher seasonal efficiencies than the previous model and is already meeting the strict European Minimum Energy Performance Standard (MEPS) levels for 2021, with many indoor/outdoor combinations reaching A++ energy ratings in cooling mode.

Contact: Michael Clancy (087 – 262 0701) or Graham McCann (087 – 950 9402), Diamond Air Conditioning. Tel: 01 – 636 3131; email: [email protected]; www.diamondair.ie


Premium PAC range from Mitsubishi Heavy Industries Mitsubishi Heavy Industries (MHI) has introduced a new and improved premium 4-6 HP outdoor unit PAC range to the Irish market.

Model FDC100-140VSA from Mitsubishi Heavy Industries’ premium 4-6 HP outdoor unit PAC range.

Key features• Keep compact size up to 6HP • Higher seasonal efficiency • Small height for easy installation: H: 845mm x W: 970mm x D: 370mm • Now compatible with SRK-ZS-R.

Low outdoor unit noise levels and increased height differences between outdoor and indoor unit of up to 50m make the updated range a great fit for many different applications

PAC is now compatible with the recently-introduced SRK-ZR-S.

MHI Diamond edit.indd 1 29/11/2017 09:03

“Ferrari has proved the perfect complement to the Soler & Palau Ventilation Group product range”, says Robert Holmes, Managing Director of S&P Ireland Ventilation Systems, “and has strengthened our market-leading position as a major supplier of ventilation system solutions for residential, commercial, industrial and infrastructure applications.”

The Ferrari range of industrial fans includes direct and belt-driven centrifugal fans, plug-fans, axial fans, blower fans, in-line fans and duct fans. Ferrari also offers a comprehensive range of commercial and domestic fan products suitable for cooling, heating and ventilation in HVAC and industrial process markets, for clean air and dirty air or particulate. They can be used as blowers, exhaust fans, forced draught fans or induced draught fans.

In addition, Ferrari specialises in ATEX fans for petro-chemical markets (ATEX Certified) where there is an explosion risk. Fans conform to 2014/34/EU

(ATEX) and are suitable for Zones 1 and 2 gas and Zones 21 and 22 dust applications.

Certification is important across all areas of application and Ferrari has approvals for high-temperature smoke extract fans for both smoke and fume extract applications (EN12101-3 certified). The centrifugal fans are certified as dual purpose fans (normal running temperature and 400ºC for two hours).

Ferrari uses aerofoil technology in its impeller-blade design to provide high-efficiency fans which absorb lower levels of power and provide quiet running noise levels. In accordance with the EU Directive 640/2009, effective 1 January 2017, all motors from 0.75kW to 375kW have to be IE-3 or IE2+inverter. As standard Ferrari goes down to 0.18kW with IE-3 rating and offers IE-4 as an option.

In-house production of all fan components and accessories is compliant with ISO 9001, ISO 14000 and OHSAS 18000 integrated system – both centrifugal and axial – and this guarantees a high level of product quality. Furthermore, many of the production processes are certified compliant with the most demanding international standards.

Full details of the entire industrial process fan range are contained in the comprehensive new 550-page catalogue, copies of which are freely available.

Contact: S&P Ireland Ventilation Systems. Tel: 01 – 412 4020; email: [email protected]; www.solerpalau.ie


Ferrari proves perfect complement to the S&P ventilation portfolio Further to the acquisition of Ferrari Ventilatori Company by Soler & Palau Ventilation Group last year, S&P Ireland Ventilation Systems has seen its market penetration grow significantly on foot of the extended and complementary nature of the Ferrari product range. That trend is set to continue thanks to new marketing initiatives from the company, including publication of its latest 550-page Industrial Process Fans catalogue, copies of which are now freely available.

S&P edit.indd 1 29/11/2017 07:54


Packaged plant rooms are normally associated with boilers, headers and water services, whereas this plantroom houses quality medical gas equipment including compressors and buffer equipment generating medical air, nitrogen and vacuum for the hospital.

The unit was manufactured in Wales and is a GRP construction. Walls are insulated and fire-rated to an agreed specification. There are two fans in the roof of the plantroom – one supplies air into the plantroom while the other is set for extraction of air if the plantroom becomes too warm. It also has acoustic lining to help minimise sound produced by the plant during operation.

Due to the BCAR compliance requirement, the project team visited the factory on two stages of the build to insure standards and specifications were upheld.

The size and footprint of the unit meant delivery was in two parts with final assembly onsite. Medical plant equipment was installed just before the second half of the plantroom was

HTS DELIVERS UNIQUE SOLUTION FOR NATIONAL CHILDREN’S HOSPITAL Hospital Technical Systems (HTS) recently completed delivery of a bespoke packaged plantroom to a corner site for the National Childrens’ Hospital at St James’s in Dublin. Although offsite fabrication is nothing new, this plantroom is unique in a number of ways. It houses medical gas equipment, is a GRP two-part construction, and is BCAR compliant.

One of the two parts of the plantroom enclosure being dropped on site.

PROJECT PROFILE

Project Details;

• Project: National Children’s Hospital Enabling Works

• Specialist Medical Gases: Hospital Technical Systems

• Mechanical Contractor: Jones Engineering

• Consultants: Arup

• Main Contractor: BAM

HTS edit.indd 2 28/11/2017 17:06


dropped into position. Final assembly took just two days onsite, after which HTS began piping and connecting up plant.

The medical air 7-bar system is a new quadruplex medical air plant with two receivers. It is also HTM 02-01 compliant. Two of the four pumps connected to the plant operate as “primary” supply while the other two are the “secondary” supply. The plant rotates the pumps in relation to use.

All plant was commissioned by trained HTS personnel and the plantroom has since been handed over to the hospital and is in full operation.

Project manager, Stephen Lavelle stated: “The plantroom presented a

unique challenge on a number of levels but the onsite coordination and final delivery was excellent due to a coordinated team effort.”

Director, David Doherty added: “We are delighted with the finished plantroom. It is just one element of the project but is key in providing medical gases to existing and future patients.”

Hospital Technical Systems offer design, supply and install of medical gases, plant and equipment to the hospital, pharma, food and educational sectors. Established in 1990, its headquarters are in Dublin and it provides nationwide supply, installation and commissioning, along with a 24-hour call out service.

Images A through to E (above and right) show the different constituent elements of the packaged plantroom during and after fit-out.

Exterior view of the finished plantroom as it sits on site.

A B

C

D

E

HTS edit.indd 3 28/11/2017 17:06

Light + Building is the world‘s leading trade fair for lighting, lighting design, and intelligent building services technology. It is also a platform for the digital revolution in buildings. Every two years Light + Building addresses the themes and trends of tomorrow, and these will be prominently featured at the next event in Frankfurt on 18 to 23 March 2018.

Current and future challenges posed by the growing demand for energy and climate-protection objectives can only be met with intelligent construction and building services solutions. The primary focus is on the reduction of CO2 emissions and greater efficiency.

In devising these solutions a forward-looking, future-proofing approach is essential because of the rapid and constantly-changing pace of technology developments. Traditional planning and construction processes must also be reviewed, and indeed revised/discarded, in favour of the adoption of initiatives such as BIM.

The smart city – the networked and intelligent city – is the solution for urbanisation problems. Through the use of digital technologies, cities will become smarter, more efficient and more sustainable. The infrastructure, buildings and services must be modernised using solutions for the internet of things (IoT).

The IoT is penetrating all sectors. Thus, smart homes (digitalisation and networking in private dwellings) and smart buildings (automation and the central operation of technical facilities from dedicated buildings) are important parts of the internet of things. Common to both is that intelligent building-services technology solutions are increasingly software dependent.

Smart living – the digitalisation and interlinkage of different aspects of life – is another cog in the system of

tomorrow’s intelligent living and working environments. Smart living is not only of interest to the younger generation. Given the process of demographic change and the growing number of single households, it is also of growing significance for older people. Thanks to intelligent technology, they now have the chance to remain independent longer.

Whether smart homes, smart buildings, smart living or smart cities, “smartification” is a never-ending process that changes all aspects of life. Smart solutions ensure that buildings become an integral part of the internet of things. Light + Building 2018 will be dominated by smart solutions with the world’s leading suppliers of lighting, electrical technology and house and building automation showing market-ready, intelligent solutions for a smarter world. Venue: Frankfurt am Main. Dates: 18 to 23 March 2018.

See also www.light-building.messefrankfurt.com

‘Smartification’ the only solution

Frankfurt am Main 18 to 23 March 2018

Light

Home and building automation

Electrical engineering

Light+Building edit.indd 1 28/11/2017 17:04


Construction has been slowly progressing throughout the centuries, especially with the advent of new tools to design and create new buildings and infrastructure, but if we had a time-machine and could transport a builder from say, Roman times, I think that builder would be more shocked about what we are wearing than how we are building.

Other market sectors have been far more receptive to change and have accelerated away from construction in terms of efficiency, and hence profitability. How has this happened and why have we let it? I personally think that there are two things at play here:• Everything we construct is bespoke;• We are too used to the magnitude of cost for construction.

There is nothing wrong with bespoke construction. Each building, however similar it may seem on the outside, will be unique in terms of the underlying geology, the building orientation, etc. So, let’s not worry about that, but determine that we can make unique projects using standard processes and

approaches. It is the cost factor that needs to be tackled.

I’m not going to try and sort out all the woes of our great industry in a single article, so let’s look at one part of it and see what we can do there. I’m going to start with light and lighting, for the sole reason that I am working with the Society of Light and Lighting on a Lighting Knowledge Series: LightBytes Roadshow right now, so it is front and centre in my brain.

To my mind there are four stages that we go through with any constructed project, despite what the various plans of

work say, and they boil down to design, specify, build and operate.

Design The design process requires human intervention for the innovation, art and stylistic concepts, but much of a designer’s time is spent doing repeated calculation, scheduling and drawing (or modelling). Much of this can be automated so let’s look at a simple lighting-based example.

We can machine-harvest required lux levels from room data sheets and, where this is not specified, from standard tables, such as those in the CIBSE Guide A or the SLL Code for Lighting. This may look similar to Figure 1.

LIGHTING UP DIGITAL ENGINEERING Digital Engineering is rapidly gaining recognition as the container phrase for BIM, digital tools, industrial revolution 4.0 and all the “smart” related work like smart buildings, smart cities, etc. As such, it is easy to get carried away with all the possibilities, the “what-ifs” of new technologies, new ways of working, and forget that to be able to do that, we have to change our “business as usual” thinking, writes Carl Collins, Digital Engineering Consultant.

Carl Collins, Digital Engineering Consultant, began using CAD in 1983 with the first commercial release of AutoCad with experience in Electro-Optic Instrument systems, having studied and practiced as a mechanical design engineer. As well as being highly conversant with document control, QEMS and IT systems, Carl is an experienced user and manager of AutoDesk products, including AutoCad and Revit.

Carl has been BIM Leader and Pioneer for Arup Associates, and Global Content Leader for Arup for over 12 years. He has also worked with various standards institutions, writing the standards that support BIM in the UK and internationally, and is currently a Digital Engineering Consultant to CIBSE and the Landscape Institute.

LIGHTING

Lighting Up Digital.indd 1 29/11/2017 13:16

This data can then be associated with particular rooms within your model and automatically create the Concept Design deliverables, such as that shown in Figure 2.

This is but one example of what the machines can do for us in the design phase. Other things may be automated circuit referencing, displaying electrical phases on views of the model, and many other things too. My first thought when a process is boring is that there is likely to be a way of automating it, freeing up my time to do more interesting things.

Specify Specification of actual products to be procured and installed is a complex process, made more complex by the

nature of relationships between the parties. The consulting engineer will want one thing, the contractor another (possibly cheaper) thing, and the manufacturer something else. All of this very often avoids asking the client what they actually want.

The “great metric of our time” has been the price of a product, but this is a very simple and crude way of measuring the worth of something. There is far more to a product than its price … it has running costs, maintenance costs, replacement costs and end-of-life costs associated with the WEEE Directive. All of these are not (usually) part of the price, but are part of the cost, and yet we still haven’t considered the other value that a product can bring.

Let’s consider our lighting design again. Does the luminaire that the consultant wants to use have a particular Colour Rendering Index (CRI) that is important to the way the design works? How can the contractor know all the important variables that are required by the design and meaningfully compare the products available?

This is where standard forms of data exchange become useful. If all the luminaires are described in a similar way, then a machine can compare them using any metric that the designer thinks important and the contractor can purchase the right fitting for the right price (and cost!).

We can achieve this using Product Data Templates, as depicted in Figure 3.

Build The process of construction is second only in order of cost magnitude to operating a building or other constructed asset. So, this needs to be done right, or there will be time and cost overruns (when has that ever happened in a construction project?).

The issues that commonly face contractors are “wrong stuff”, “wrong time”, “wrong place”. So, how can we look at what we need, and where and when it is needed? Again, technology can come to our aid here. We can use our design models to create a time-line of what needs to happen before other things can happen. Our industry has actually been pretty good at doing this over the years, using Gantt charts to map out the required progress, but this chart was usually separate from the design and construction process. It couldn’t map the exact design or lead- in times, so the data was good, but not great.

Also, the actual act of construction was done for the first time on the project itself, there was very rarely any rehearsal. With digital tools we can now see what we are building, as it will look when built, and practice the stages we need to go through to get there.


Figure 2 – Concept Design deliverable

Figure 1 – Table of lux levels


This view of the finished article is just another view of the data we have been creating, so it will always be correct.

In FIgure 4 we can see where the luminaires will be positioned, we can

see that they are mounted in the false ceiling, so we can see instantly that the ceiling needs to be in place before we can install them.

In Figure 5 we can see the effect that

the luminaires will have on the space. It is simply another view of the same data that exists in the drawings and in the luminaire schedule.

OperateThe operation of a constructed asset is the costliest process in its existence, yet our industry has been very poor at providing the information that the users of the asset require to run it effectively.

Consider the very simple lighting design we have been looking at so far. How will the users of this meeting room use the lighting? Often there will be a control panel (scene selector or bank of light switches) for the users to operate the lights. On the assumption that the system does not have daylight linking, has anyone told them that during daylight hours you should turn the ones by the window off, as the natural daylight will be sufficient?

Has anyone labelled the lighting controls with what they are there for, or do we have a bank of buttons that give no clue? The user will then try all the combinations until they find what they want, or just turn them all on, as that is quicker.

Part of the digital revolution in construction is “Soft Landings”, which is intended to give some training and feedback to the users of the space on how to use it and inhabit it. Thus armed, they can use it as it was designed and constructed, which in turn will help produce results that are more akin to the designer’s vision, and help to close the energy gap.

ConclusionIn this article I have looked at lighting, which is just one aspect of the design, construct and inhabit process that all construction projects go through. This hopefully has shown us that there are many possibilities to remove the boring jobs and, at the same time, provide our clients with a better service.

Now go forth and digitise!

Figure 3 – Product Data Template


Figure 4 – Cartoon view of design

Figure 5 – Rendered view of design



Beware ‘Rapid Build’ Fire safety audits commissioned by the Department of Education have uncovered items which need to be addressed to bring some of the “Rapid Build” schools up to the correct standard. The Rapid Build Schools construction programme in 2008 delivered badly-needed schools in an accelerated timeframe. However, it now seems that fast-tracking design and construction can introduce risks which may outweigh the benefits.

Apart from the economic cost of rectifying the problems later, and the cost of investigating and designing solutions to the problems, the reality is that students are occupying buildings at a time when those buildings are not up to standard. Look out for the words “Rapid” or “Fast Track” in future development proposals.

It will do, sure it’s only temporary! Young and enthusiastic contractors will rise to the challenge and deliver whatever is required with surprising haste. Older experienced hands will stop to recall that “temporary” doesn’t have a time limit specified. Sure wasn’t the Eiffel Tower a temporary construction for the World Fair in Paris 1889 … never mind London’s Millennium Wheel.

The problem with engineering even temporary constructions is that

engineering calculations need defined dates and timelines. This allows engineers to evaluate the expected stresses and strains on the installation over a particular timeline, and then to design and specify suitable materials and solutions.

But Ireland is falling in love with temporary constructions. Temporary is quick, costs less, and is easier to get planning permission for. Only time will tell what standards these temporary installations were designed and constructed to.

Container living Living in a box is just what 1,000 students have been doing in Wenckehof Copenhagen. The student village was constructed in 2006 using “up-cycled” containers. The US Army corps has used container villages to house thousands of personnel in Iraq and Afghanistan. Is this the solution to Irelands housing crisis? Quick to deliver, using off-site assembly, rapidly re-locatable … what’s not to like?

Well I suppose the external view of a container is really the “what’s not to like” part. We all have a vision of rusted steel containers on wharves and even on building sites. But lets face it, those building site containers often provide comfortable office and canteen locations on those sites. A decent coat of paint outside and maybe this is the future. Now all we need is a mind-set change to adapt this rapid solution to Ireland.

MUSINGS of

Engineering

TimAthena Swans and WiBSE We are being engulfed by acronyms guiding the women in engineering initiatives. The Athena SWAN Charter was established “to encourage and recognise commitment to advancing the careers of women in science, technology”. The SWAN part is from the Scientific Women’s Academic Network. Athena Swan has been embraced by most of Ireland’s third level colleges.

CIBSE Ireland has also embraced the challenge byforming a women in building services engineering group (WiBSE) which will follow the format established by CIBSE UK. The group will support and encourage women joining, working, staying and progressing in the building services industry.

It’s getting difficult to remember what all the acronyms mean, but the result should be a greater presence of women in the building services industry, which will be a welcome boost for all.

Engineering TIm.indd 1 29/11/2017 10:29

• Unique contoured styling • Pre-set operation

• Energy-saving performance • Increased max piping length

• Noise level down to 19dB(A) • Optional Wi-Fi control

• High seasonal efficiency • Weekly timer function

• High COP levels • Improved cool/heat auto changer

www.mhiae.com www.diamondair.ie

For more information, please visit www.mhiae.com call us on 0207 025 2772

or email [email protected]

*At 65°C water supply

e For mor

*A

enquiries@or email 02call us on

wwwinformation, please visit

At 65°C water supply

@mhiae.com207 025 2772

.mhiae.comwDiamond Air Conditioning Ltd,

C5 Bymac Centre, Northwest Business Park, Blanchardstown, Dublin 15. Tel: 01 – 636 3131;

email: [email protected]; www.www.diamondair.ie

Diamond Air Conditioning Ltd, C5 Bymac Centre, Northwest Business Park,

Blanchardstown, Dublin 15. Tel: 01 – 636 3131; email: [email protected];

www.diamondair.ie

Three colour options …

Diamond Air Conditioning Ltd, C5 Bymac Centre, Northwest Business Park, Blanchardstown. Dublin 15. Tel: 01 – 636 3131; email: [email protected]; www.diamondair.ie

… from the ZS Premium Series ac units

by Mitsubishi Heavy Industries

IBC MHI Diamond Adv Dec 2017.indd 1 29/11/2017 10:19

CONTROL YOUR COMFORT AND SAVE AS NEVER BEFORE

5,00 COP

HIGH PERFORMANCE T-CAP

A++

ErP 55°C 5 YEARS COMPRESSOR WARRANTY

CONSTANT HEATINGAT –20°C

–28°CA

35°C SYSTEM LABEL DHW 55°C

A

www.aircon.panasonic.ie

For total comfort and real savings at home, choose the Aquarea H Generation with Smart Cloud

· Top class energy efficiency of A++ at 55°C

(A+++ at 35°C with system label)

· Reduced installation time and costs

· All in One with 2 zones control

· Maintenance free and stainless steel tank

Panasonic Advert October 2017.indd 1 28/09/2017 16:44

Documents

Cover Dec 2017 - Building Services News...2 Building Services News l November/December 2017NEWS AND PRODUCTS Industry supports ‘Better Life Cycle’ Industry representatives gathered