cover page - Saveurja for Streets and Public spaces.pdf · cuStomer SPeak “Wipro Lighting has been at the forefront of offering leading edge technologies. I recommend Wipro Lighting

�Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale

cover page

Lighting for StreetS and PubLic SPaceS

�

Turbo .15[WST/H 69]

uno .16[WST/H 71]

Leo .18[WST/H 76]

expreSS .19[WSM/S 24]

expreSS .19[WST/H 25]

WST 65 .23

contentS

customer Speak .06

applications guide .08

product codification .10

Ingress protection (Ip) classification .11

customer benefits .13

Product indeX

WSM 20/21 .26 WSS 20/21 .26

a. Street Light Luminaires [hid]

WSF 15 .28 WSp 11126 .29 WpM/S 27 .31

vecTor .34WFH 51

vecTor .34WFT/ H 52

WFZ 31 .35 WFZ 42 .36 SpecTra [WFZ 66] .37

c. flood Light Luminaires

b. Street Light Luminaires [cfL/ ftL] & Post tops


Modern Trends in Street Lighting .38

Lamp Information .42

branch addresses

cuStomer SPeak

“Wipro Lighting has been at the forefront of

offering leading edge technologies. I recommend

Wipro Lighting Products & solutions as they offer

the best value for our clients.”

B. R. V. MUTRHY

Potential Service consultants (P) Ltd., bangalore

We have used Wipro Lighting Solutions and Products for

BCCI offices in Mumbai. The Lighting Solutions, Technical

Support and Designs provided by Lighting Solution Group,

Mumbai is good and innovative. Their Lighting Solutions

have helped us in creating best lighting effects for their

prestigious project. The response time in submitting

designs is also good.

We wish them all the best for the future ahead.

Amol Prabhu

Shashi Prabhu and associates, Mumbai & Pune

It is my privilege to endorse the product

of Wipro Lighting. We have been using

the fitting and the fixtures of Wipro in our

institutional, health care and office building.

We have found the products worthy and have

value for its cost.

sAngeeT sHARMA

S. d. Sharma and associates

Panchkula

We are glad to appreciate the products and

services offered by Wipro Lighting for several

projects. We find that they have very wide range

of products to suit varied needs, which include

interior, exterior and landscape lighting.

We are very much satisfied with the service,

products and especially the post delivery services

offered, and will surely consider them for our

future projects. We wish them all the best.

sUResH PATel,

Sthapati interiors Pvt. Ltd., ahmedabad

�

aPPLicationS guide

Offices(Open-plan Offices, sOftware develOpment centers, call centers, fOyers, cOrridOrs, Office OutdOOrs, etc.)

HOtel & caterinG(Bars, HOtel rOOms, restaurants, canteens, OutdOOrs, etc.)

car parKs

GaraGe

autO sHOwrOOm

HOspitals & clinics(wards, OperatinG tHeaters, General rOOms, HOspital OutdOOrs)

entrance areas

HOmes

scHOOl & lecture Hall

puBlic access & circulatiOn areas(entrance Halls and lOBBies, staircases)

pHarmaceutical plant(cleanrOOm & semi cleanrOOm areas)

receptiOn

swimminG pOOl

mines

cOnveyOr Gallery

auditOrium

facade liGHtinG

statues


�

pOrts and dOcKs cOnferences maJOr rOads(HiGHways, BOulevards, cOllectOr rOads, rOundaBOuts, crOssinGs, traffic JunctiOns)

service area

railway statiOn

airpOrts

lOcal rOads(sOciety rOads & sHOppinG streets witH mainly lOcal traffic)

secOndary rOads(urBan & rural rOads)

resOrt

wareHOuses

tHe arts(art Galleries, museums, cinemas, places Of wOrsHip, etc.)

Gardens(parKs, farmHOuses, resOrts, BunGalOws)

spOrts facilities

BanKs & insurance cOmpanies

petrOl pump

fOOd and BeveraGe industry

retail sHOp racKs

manufacturinG plant(prOductiOn plants, wOrKsHOps, laBOratOries, etc.)


10

W 6� ��0WIPRO STREET lIghT Mhl WATTAgE

OF lAMPPRODUCT

CODE

S h

Product codification

first letter - cOmmOn fOr all prOducts

w wiprO f fantasy

u urBanO G GalaXy

c cleanrOOm

SECOND lETTER - PRODUCT TYPEc cOmmercial v cOmmerciali industrial H HiGHBay/ midBay/ lOwBays street/ stepliGHt f flOOd liGHtw well Glass/ wall liGHt K BulKHeadp pOst tOp B Ballast/ BOllarda aviatiOn r retailu underwater d driveOver/ walKOvert tracKliGHt G cOntrOl Gear

ThIRD lETTER - TYPE OF lAMPG incandescent lamp: Glsf linear fluOrescent lamp: ftlp cOmpact fluOrescent lamp: cflm HiGH pressure mercury vapOur lamp: Hpmvs HiGH pressure sOdium vapOur (elliptical) lamp: Hpsv-et HiGH pressure sOdium vapOur (tuBular) lamp: Hpsv-tQ tunGsten HalOGen lampn neOn spiral lampH metal Halide lamp: mHl

first two numerals: product code as per design methodologythird numeral: no. of lamps in the luminaire last two numerals: wattage of lamps used in the luminaire

EXCEPTIONSin case of Hid luminaires (mercury/ sodium/ metal Halide) the last three numbers represent the lamp wattage. number of lamps is not indicated.

in case of aviation obstruction luminaire, the numerals do not represent the wattage of the lamp.

NOTE* all trademarks are properties of the respective owners.** innovation and improvement are a way of life at wipro. we reserve the right to modify the product without prior intimation.

Given below is an example to explain the process of codification.

the products are assiGned cataloGue nos. based on product type, lamp type, number of lamps and wattaGe of the lamp used.


��

ingreSS Protection (iP) cLaSSification - degree of Protection


DegRee of PRoTecTion inDicATeD BY THe fiRsT cHARAcTeRisTic nUMeRAl (DUsT PRoTecTion)

DescRiPTion sHoRT DefiniTion

0 Non-protected No special protection

1 Protected against solid objects greater than 50 mm

A large surface of the body, such as a hand (but no protection against deliberate access). Solid objects exceeding 50 mm diameter


Finger or similar objects not exceeding 80 mm in length. Solid objects exceeding 12 mm in diameter

3 Protected against solid objects greater than 2.5 mm

Tools, wires etc of diameter or thickness greater than 2.5 mm. Solid objects exceeding 2.5 mm in diameter


Wires or strips of thickness greater than 1.0 mm. Solid objects exceeding 1.0 mm in diameter

5 Dust-protected Ingress of dust is not totally prevented. But dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment

6 Dust-tight No ingress of dust

DegRee of PRoTecTion inDicATeD BY THe seconD cHARAcTeRisTic nUMeRAl (MoisTURe PRoTecTion)

DescRiPTion sHoRT DefiniTion

0 Non-protected No special protection

1 Protected against dripping water

Dripping water (vertically falling drops) shall have no harmful effect

2 Protected against dripping water when tilted up to 15O

Vertically falling drops shall have no harmful effect when the object is tilted to any angle upto 15O from its normal position

3 Protected against splashing water

Water falling as a spray at an angle up to 60O from the vertical shall have no harmful effect

4 Protected against splashing water

Water splashed against the enclosure from any direction shall have no harmful effect

5 Protected against water jets

Water projected by a nozzle against the enclosure from any direction shall have no harmful effect

6 Protected against heavy seas

Water from heavy seas or water projected in heavy jets shall not enter the enclosure in harmful quantities

7 Protected against the effect of immersion

Ingress of water in a harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time

8 Protected against submersion

The equipment is suitable for continuous submersion in water under conditions which shall be specified by the manufacturer. Note: Normally this will mean that the equipment is hermetically sealed. However with certain types of equipment it can mean that water can enter but only in such a manner that it produces no harmful effects

�3Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale

cuStomer benefitS

SimPLe moduLaritY

VaLue for moneY

aeSthetic

0�enhancedefficiencY

LuminaireS with different ShaPeS and formS, enhanceS the oPticaL quaLitY of Surrounding areaS

high ingreSS Protection LuminaireS

•

•

VarietY of aeSthetic LuminaireS makeS StreetS PLeaSing bY daY and Stunning bY night

high quaLitY materiaLS and unique finiSh, ProVideS the range, SPeciaL StYLe and eLegance

•

•

high corroSion reSiStance and Longer Life

wide range of LuminaireS for Varied aPPLicationS

•

•

03

02

04

wide and uniform Light diStribution

integrateS weLL with anY kind of Site and architecturaL eLementS

•

•

Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale

14

Turbo [WST 69/ WSH 69]

��Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale

SPECIFICATIONSdie cast aluminium compact and aesthetic housing with

electrochemically brightened high purity anodised aluminium pot optics reflector

ip 66 optically sealed lamp compartment with flat toughened glass totally sealed to reflector using silicon sealant ensuring ip and long life performance

top maintainable product with hingeable top cover with loss proof thumb screw giving access to control gear and lamp compartment

anti corrosive stainless steel clamps with gasket totally seals lamp holder cap and facilitates easy lamp replacement

special air breathing filter is provided in lamp holder cap for better ventilation to ensure longer lamp life

lamp position adjustment to control distribution of light on street side and kerb side of road

removable control gear for ease of maintenanceintegral pole mounting arrangementHeavy duty copper wound ballast, pf capacitor and electronic

ignitor per-wired upto terminal block.conforms to is 10322 part 5/ sec 1: 19�7

ACCESSORIES4 way 10 amps Gfp mains connectorlamp holder base e40 porcelain body with silver contacts

INSTAllATIONinstallation to suit 60 mm diameter pole

•

•

•

•

•

•

•••

•

••

•

turbo [ wSt 69/ wSh 69 ]DIe-caST aLuMInIuM Top MaInTaInabLe STreeT LIgHT LuMInaIre WITH poT opTIcS reFLecTor

electrical data cat.no lamp rated voltage (v) mains current (a) approx weight (kg) case lot (in nos)WST 69150 1 x 150 W HPSV (T) 230/ 240 0.8 8.70 01WST 69250 1 x 250 W HPSV (T) 230/ 240 1.3 10.00 01WSH 69250 1 x 250 W MHL (T) 230/ 240 1.3 10.00 01

suitable for 150/ 250 w hpsv (t) and 250 w mhl (t) lamps

DIMenSIon DraWIng WST 69/ WSH 69

160

582

302

lamp cOmpartment: ip 66Gear cOmpartment: ip 54


16

uno [ wSt 71/ wSh 71 ]DIe-caST aLuMInIuM Top MaInTaInabLe STreeT LIgHT LuMInaIre WITH curveD TougHeneD gLaSS

SPECIFICATIONSpressure die cast, compact and aesthetic housing

with electrochemically brightened high purity anodized aluminium pot optics reflector

ip 66 sealed lamp compartment with curved toughened glass totally sealed to reflector using silicon sealant

top maintainable product with quick release lamp holder assembly

anti corrosive, stainless steel quick release toggle facilitates easy opening of top cover and gives instant access to lamp compartment

top cover link mechanism enables holding top cover in open state during maintenance

variable optics arrangement to control distribution of light on street and kerb side of road

lamp compartment is totally sealed near lamp holder assembly using silicon gasket

special air breathing filter is provided for better heat ventilation to facilitate longer lamp life

Heavy duty copper wound ballast, pf capacitor and electronic ignitor pre-wired upto terminal block

conforms to is 10322/ part 5/ sec 1: 19�7

INSTAllATIONinstallation to suit 52 mm diameter pole

•

•

•

•

•

•

•

•

•

•

•

suitable for 150/ 250 w hpsv (t) and 250 w mhl (t) lamps


electrical data cat. no. lamp rated voltage (v) mains current (a) approx. weight (kg) case lot ( in nos)WST 71150 1 x 150 W HPSV (T) 230/ 240 0.8 9.70 02WST 71250 1 x 250 W HPSV (T) 230/ 240 1.3 11.00 02WSH 71250 1 x 250 W MHL (T) 230/ 240 1.3 11.00 02

52

635

lamp cOmpartment: ip 66Gear cOmpartment: ip 54

uno [WST 71/ WSH 71]

195

270

�7Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale

uno [WST 71/ WSH 71]


1�

lamp cOmpartment: ip 66Gear cOmpartment: ip 54Leo [ wSt 76/ wSh 76 ]

DIe caST aLuMInIuM STreeT LIgHT LuMInaIre WITH poT opTIcS reFLecTor

SPECIFICATIONSpressure die cast, compact and aesthetic housing with

electrochemically brightened high purity anodized aluminium pot optics reflector

ip 66 optically sealed lamp compartment with curved toughened glass totally sealed to reflector using silicon sealant

anti corrosive, die cast quick release toggle facilitates easy opening of top cover and gives instant access to lamp compartment

lamp compartment is totally sealed near lamp holder assembly using silicon gasket

variable optics arrangement to control distribution of light on street and kerb side of road

special air breathing filter is provided for better heat ventilation to facilitate longer lamp life

Quick release lamp holder assemblyHeavy duty copper wound ballast, pf capacitor and electronic

ignitor per-wired upto terminal block.conforms to is 10322/ part 5/ sec 1: 19�7

INSTAllATIONside and bottom pole mounting optionsinstallation to suit maximum 60 mm diameter pole

•

•

•

•

•

•

••

•

••

electrical data cat. no. lamp rated voltage (v) mains current (a) approx. weight (Kg.) case lot (in nos.)WST 76150 1 x 150 W HPSV (T) 230/ 240 0.80 11.00 02WST 76250 1 x 250 W HPSV (T) 230/ 240 1.30 12.20 02WST 76400 1 x 400 W HPSV (T) 230/ 240 2.10 13.30 02WSH 76250 1 x 250 W MHL (T) 230/ 240 1.30 12.20 02WSH 76400 1 x 400 W MHL (T) 230/ 240 2.10 13.30 02

suitable for 150/ 250/ 400 w hpsv (t) and 250/ 400 w mhl (t) lamps


Leo [WST 76/ WSH 76]

258

60

76 778

348

348

��Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale

eXPreSS [ wSm/ S 24 ]eXPreSS [ wSt/ h 25 ]poT opTIcS Ip 65 Deep DraWn aLuMInIuM STreeT LIgHT LuMInaIre

SPECIFICATIONSsingle piece deep drawn aluminium housing with built

in electrochemically brightened, anodised high purity aluminium pot optics reflector

die cast aluminium pole mounting system with option of side and bottom entry

silverized finish from outsideHinged toughened glass shieldanti corrosive ss togglesepdm gasketcomplete with heavy duty copper wound ballast, pf capacitorHeat and abrasion resistant Xlpe wiresconforms to is 10322/ part 5/ sec 1 : 19�7

ACCESSORIESlamp Holders es (e40) porcelain10 amps G.f.p mains connector for 2.5 sq. mm

and pf improvement capacitorinternal earthing terminal for 14 swG earthing wirethree wire electronic ignitor; super imposed pulse

type ignitor offered on request

OPTIONAl FEATURESexternal earthing terminalpost top mounting suitable for outer dia: 40-50 mm

(wsm/ s 24 series) & 45-55 mm (wst/ H 25 series)

INSTAllATION

suitable for side bracket mounting on pole with outer dia. 40-50 mm (in wsm/ s 24 series) and 45-55 mm (wst/ H 25 series)

PACkINg CASE lOT Housing: 1 no. Ballast: 4 nos.

•

•

•••••••

••

••

••

•

••

wsm/ s 24 - suitable for 80/ 125 w hpmv and 70 w hpsv (e) lampswst/ h 25 - suitable for 150/ 250 w hpsv (t) and 250 w mhl (t) lamps

DIMenSIon DraWIng WSM/ S 24 DIMenSIon DraWIng WST/ H 25

WSM/ S 24

WST / H 25

electrical data cat. no. lamp rated voltage (v) mains current (a) approx. weight (kg) case lot ( in nos)WSM 24080* 1 x 80 W HPMV (BC Lampholder) 230/ 240 0.43 4.10 01 WSM 24125* 1 x 125 W HPMV (BC Lampholder) 230/ 240 0.66 4.50 01WSS 24070 1 x 70 W HPSV (E)(with internal starter) 230/ 240 0.46 4.50 01 WSS 24071 1 x 70 W HPSV (E)(without internal starter) 230/ 240 0.46 4.50 01 WST 25150 1 x 150 W HPSV (T) 230/ 240 0.80 8.70 01 WST 25250 1 x 250 W HPSV (T) 230/ 240 1.30 8.70 01 WSH 25250 1 x 250 W MHL (T) 230/ 240 1.30 8.70 01*In case required with ES cap, suffix ES to the cat. no.

ip 65

480

145

260 600325

185


22

WST 65

23Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale

wSt 65DIe caST aLuMInIuM STreeT LIgHT LuMInaIre WITH poT opTIcS reFLecTor

SPECIFICATIONSsingle piece die cast aluminium stove enamelled black housing

with electrochemically brightened, anodised high purity aluminium, pot optics parabolic reflector

complete with heavy duty copper wound ballast, pf correction capacitorHingeable acrylic bowlanti corrosive ss togglesepdm gasketconforms to is 10322/ part 5/ sec.1 : 19�7

ACCESSORIESlamp Holder Ges (e40) skirted porcelain2 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableearthing terminal for 14 swG earthing wire (inside)three wire electronic ignitor

INSTAllATIONsuitable for mounting on pole with outer dia < 60 mmcable entry through bracket from side

OPTIONAl FEATURESepoxy paintingexternal earthing terminal

PACkINg CASE lOT Housing: 1 no acrylic (wsa 65): 10 nos.Ballast: 4 nos.

•

•••••

••••

••

••

•••

60 hoLe

365 648

345

suitable for 1 x 150 w/ 250 w hpsv (t) lamps

DIMenSIon DraWIng WST 65

electrical data cat. no. lamp rated voltage (v) main current (a) approx. weight (kg) case lot (in nos)WST 65150 1 x 150 W HPSV (T) 230/ 240 0.80 8.20 01WST 65250 1 x 250 W HPSV (T) 230/ 240 1.30 9.40 01

WST 65

ip 55


26

SPECIFICATIONSsingle piece deep drawn aluminium stove enamelled black

outside and white inside housingHigh purity anodised aluminium side reflectorsHingeable acrylic diffuser: wsa 20 for wsm/ s 20

and wsa 21 for wsm/ s 21epdm foam gasketanti corrosive ss toggles for acrylic bowl clampingcomplete with heavy duty copper wound ballast,

pf correction capacitorconforms to is 10322/ part 5/ sec. 1: 19�7

ACCESSORIESlamp holder 3 pin Bc / es 27 porcelain for wsm/s 20;

and Ges (e40), skirted porcelain for wsm/s 212 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableearthing terminal for 14 swG earthing wire (inside)three wire electronic ignitor (for Hpsv lamps only)all accessories are pre-wired upto terminal block


INSTAllATIONsuitable for mounting on pole with-

Outer dia < 50 mm for wsm 20/ wss 20 (with adjustable ‘u’ clamps) Outer dia < 55 mm for wsm 21/ wss 21 (with adjustable ‘u’ clamps)

PACkINg CASE lOT Housing: 1 no. acrylic (wsa 20/ 21): 10 nos.Ballast: � nos. for wsm/ s 20 and 4 nos. for wsm/ s 21

•

••

•••

•

•

••••

••

•

•••

wSm/ S 20wSm/ S 21SIngLe pIece STreeT LIgHT WITH SIDe reFLecTor

WSM/ S 20/ 21

DIMenSIon DraWIng WSM/ S 20 DIMenSIon DraWIng WSM/ S 21

wsm/ s 20 - suitable for 80/ 125 w hpmv and 70 w hpsv (e) lampswsm/ s 21 - suitable for 250 w hpmv and 150/ 250 w hpsv (e) lamps

electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot (in nos)WSM 20080* 1 x 80 W HPMV (BC Lamp holder) 230/ 240 0.43 4.20 01WSM 20125* 1 x 125 W HPMV (BC Lamp holder) 230/ 240 0.66 4.30 01WSS 20070 1 x 70 W HPSV (E) (with Internal Starter) 230/ 240 0.46 4.50 01WSS 20071 1 x 70 W HPSV (E) (without Internal Starter) 230/ 240 0.46 4.50 01WSM 21250 1 x 250 W HPMV 230/ 240 1.30 6.40 01WSS 21150 1 x 150 W HPSV (E) 230/ 240 0.80 6.30 01 WSS 21250 1 x 250 W HPSV (E) 230/ 240 1.30 7.10 01* In case required with ES cap, suffix ES to the cat. no.

ip 43

627

225

355

50 PoLe entrY

43455 PoLe entrY

628

270


WSM/ S 20/ 21


2�

cat. no. a B c d (inner diameter)WCP 15140 1340 120 105 35WCP 15240 1345 145 125 43

SPECIFICATIONSsheet aluminium stove enamelled grey housing fitted

with gear trayclear ribbed acrylic coverslim open type low loss copper wound ballast,

pf correction capacitorconforms to is 10322/ part 5/ sec. 1: 19�7

ACCESSORIESsleek snap fit rotor holder & starter seatpinch type starter with r.f. suppression capacitor2 way 5 amps Gfp mains connector for 1 sq. mm incoming cableearthing terminal for 14 swG earthing wire all accessories are pre-wired upto terminal block

INSTAllATIONprovision for mounting through pole with -

pipe outer dia < 35 mm for wsf 15140 pipe outer dia < 43 mm for wsf 15240

cable entry from side through rubber piercing plug

OPTIONAl FEATURESsuper low loss ballastepoxy paintingexternal earthing terminal

•

••

•

•••••

•

•

•••

wSf 15SeconDarY roaD FLoureScenT STreeT LIgHT LuMInaIre

a

b

cd

suitable for 36 w/ 40 w ftl (t8) lamps

electrical data cat. no. lamp rated voltage (v) main current (a) approx. weight (kg) case lot (in nos)WSF 15140 1 x 36/40 W FTL (T8) 230/ 240 0.23 3.80 08WSF 15240 2 x 36/40 W FTL (T8) 230/ 240 0.43 4.50 06

DIMenSIon DraWIng WSF 15

WSF 15

ip 44

2�Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale

SPECIFICATIONS long life silverised finish aluminium housinglong life epdm foam gasketfitted with stainless steel toggles for easy

maintainance of productremovable gear tray helps faster maintainancecable entry from side through rubber piercing plugdeep drawn aluminium housing fitted with gear trayclear acrylic coverslim open type low watt loss copper wound ballastconform s to is 10322/ part 5/ sec. 1: 19�7

ACCESSORIESsleek pBt lamp holder & starter seatpinch type starter2 way 5 amps Gfp. mains connector for 1.0 sq. mm. incoming

cable internal earthing terminal for 14 swG earthing wire

INSTAllATIONprovision for mounting through pole with pipe outer diameter

from 20 to 32 mm

OPTIONAl FEATURESexternal earthing terminal

•••

••••••

•••

•

•

wSP 11136SILverISeD FInISH coMpacT FLuoreScenT (cFL) STreeT LIgHT

WSp 11136

DIMenSIon DraWIng WSp 11136

suitable for 1 x 36 w cfl (tc-l ) lamps

electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot (in nos)WSP 11136 1 x 36 W CFL (TC-L) 230/ 240 0.23 1.50 08

490 105

105

ip 54


590

380

100

inner diameter 60

SPECIFICATIONS rota moulded double conical shaped Hdpe domecast aluminium spigot fitted with gear tray, heavy duty copper

wound ballast, with or without p. f. capacitorHeat and ageing resistant gasket between spigot and domea bracket fixed to gear tray supports the lamp holder for fixing

lamp in cap-up positionsconforms to is 10322/ part 5/ sec. 1: 19�7

ACCESSORIESlamp holder 3 pin Bc/ es 27 porcelain 2 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableearthing terminal for 14 swG earthing wire (internal)three wire electronic ignitor (for Hpsv lamps only)all accessories are pre-wired upto terminal block

INSTAllATIONsuitable for mounting on pole with outer dia < 60 mmcable entry through pole from bottom

PACkINg CASE lOTspigot assembly : 1 no., dome : 1 no., Ballast : � nos

••

••

•

•••••

••

•

wPm 27/ wPS 27DecoraTIve DoubLe conIcaL InTegraL poST Top LuMInaIre

WpM 27/ WpS 27

DIMenSIon DraWIng WpM 27/ WpS 27

suitable for 80/ 125 w hpmv and 70 w hpsv (e) lamps

electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot (in nos)WPM 27080* 1 x 80 W HPMV (BC lamp holder) 230/ 240 0.43 5.20 01WPM 27125* 1 x 125 W HPMV (BC lamp holder) 230/ 240 0.66 5.60 01WPS 27070 1 x 70 W HPSV (E) (with internal starter) 230/ 240 0.46 5.60 01WPS 27071 1 x 70 W HPSV (E) (without internal starter) 230/ 240 0.46 5.60 01* In case required with ES cap, suffix ES to the cat. no.

ip 55


34

electrical data cat no. lamp rated voltage (v) mains current (a) approx. weight (kg) case lot (in nos)WFH 51070 1 x 70 W MHL (HIT-DE ) 230/ 240 0.41 4.10 02WFH 51150 1 x 150 W MHL (HIT-DE) 230/ 240 0.84 5.10 02WFT 52150 1 x 150 W HPSV (T) 230/ 240 0.80 7.80 01WFT 52250 1 x 250 W HPSV (T) 230/ 240 1.30 9.20 01WFT 52400 1 x 400 W HPSV (T) 230/ 240 2.10 10.20 01WFH 52250 1 x 250 W MHL (T) 230/ 240 1.30 9.20 01WFH 52400 1 x 400 W MHL (T) 230/ 240 2.10 10.20 01

Vector [ wfh 51 ] Vector [wft/ h 52 ] InTegraL FLooDLIgHT WITH aSYMMeTrIc beaM reFLecTor

SPECIFICATIONS die cast aluminium stove enameled housing with adjustable

mounting cradleHigh purity anodized aluminium reflector with bright hammered

finish for wide beam light distributionanti corrosive stainless steel togglesHeat resistant hingeable toughened glass and silicon

gasket assemblyZinc passivated removable control gear tray with a separate

chamber for efficient heat dissipationip 65 - dust, water and insect proofHeavy duty copper wound ballast and all accessories

pre-wired upto terminal blockconforms to is 10322/ part5/ sec. 1: 19�7

ACCESSORIESlamp holder e40 base porcelain (wfZ 52) and rx-7s base (wfZ 51)10 amps Gfp mains connector for 2.5 sq. mm cablepf improvement capacitorexternal double compression cable glandthree wire electronic ignitor

•

•

••

•

••

•

•••••

405

445

305

290

160

140

220

105

105

295

195

120

wfh 51 - suitable for 70/ 150 w mhl (hit-de) lampswft/ h 52 - suitable for 150/ 250/ 400 w hpsv (t) and 250/ 400 w mhl (t) lamps

DIMenSIon DraWIng WFH 51

WFH 51

DIMenSIon DraWIng WFT/ H 52

WFT/ H 52

ip 65


SPECIFICATIONSdie cast aluminium oxy-metallised lamp holder housing with

cooling fins, spun high purity anodised aluminium parabolic reflector

Heat resistant toughened glass sealed with silicon sealantmounting cradle along with protractorconforms to is 10322/ part 5/ sec 1 : 19�7

ACCESSORIES

lamp Holder base Ges (e 40), skirted porcelain2 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableXlpe internal wiring with class ‘H’ insulationearthing terminal for 14 swG earthing wiresuitable for 19 mm et cable entrylamp holder is pre-wired upto terminal block

INSTAllATIONmounting with 3 nos. of m-12 bolt on mounting cradle

note : distance of control Gear Box from iuminaire should be less than 30 mtrs. for proper re-ignition


PACkINg CASE lOTflood light : 1 no., c. G. Box: 4 nos., Ballast : 4 nos

•

•••

••••••

•

••

•

wfz 31non-InTegraL SYMMeTrIc FLooD LIgHT LuMInaIre

495

510

14 hoLe3 noS. 5050

WFZ 31

DIMenSIon DraWIng WFZ 31

suitable for 1 x 250 w and 1 x 400 w hpmv/ hpsv (e/t)/ mhl lamps

ip 65

electrical data cat.no lamp type rated voltage (v) mains current (a) approx. weight (Kg) case lot cG BoxWFZ 31250 1 x 250 W HPMV 230/ 240 1.3 6.0 01 WGM 56250/16250WFZ 31250 1 x 250 W HPSV (E/T) 230/ 240 1.3 6.0 01 WGS 56250/16250WFZ 31250 1 x 250 W MHL 230/ 240 1.3 6.0 01 WGH 56250/16250WFZ 31400 1 x 400 W HPMV 230/ 240 2.1 6.0 01 WGM 56400/16400WFZ 31400 1 x 400 W HPSV (E/T) 230/ 240 2.1 6.0 01 WGS 56400/16400WFZ 31400 1 x 400 W MHL 230/ 240 2.1 6.0 01 WGH 56400/16400

Please order suitable control gear box


36

wfz 42HeavY DuTY non-InTegraL SIngLe LaMp aSYMMeTrIc WIDe beaM FLooD LIgHT LuMInaIre

SPECIFICATIONS die cast aluminium painted black housing with

mounting cradle along with protractorHigh purity anodized aluminium reflector with

bright hammered finishtoughened glass permanently fixed to housing

using silicon sealantnarrow beam distribution can be offered on requestconforms to is 10322/ part 5/ sec. 1: 19�7

ACCESSORIESlamp Holder base Ges (e 40), skirted porcelain2 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableearthing terminal for 14 swG earthing wiresuitable for 19 mm et cable entrylamp holder is pre-wired upto terminal blocksilicon insulation internal wiring

INSTAllATION mounting with 3 nos. m-12 bolt on mounting cradle

note : distance of control Gear Box from iuminaire should be less than 30 mtrs. for proper re-ignition.


PACkINg CASE lOTflood light (wfZ 40) : 1 no., c. G. Box: 4 nos., Ballast : 4 nos

•

•

•

••

••••••

•

••

•suitable for 250/ 400 w hpsv (t) and 250/ 400 w mhl (t) lamps

WFZ 42

electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot cG BoxWFZ 42250 1 x 250 W HPSV (T) 230/ 240 1.3 4.1 01 WGS 56250/16250WFZ 42400 1 x 400 W HPSV (T) 230/ 240 2.1 4.1 01 WGS 56400/16400WFZ 42250 1 x 250 W MHL (T) 230/ 240 1.3 4.1 01 WGH 56250/16250WFZ 42400 1 x 400 W MHL (T) 230/ 240 2.1 4.1 01 WGH 56400/16400

Please order suitable control gear box


406145

72.53 nos.

300

139

ip 65


SPectra [wfz 66]non-InTegraL SYMMeTrIc WIDe beaM FLooD LIgHT LuMInaIre

SPECIFICATIONS extruded ribbed anodised aluminium compact and aesthetic

housing with pdc oxy-metallised aluminium end caps for better heat dissipation

specially designed pre-anodized super high purity aluminium reflector

Heat resistant toughened glass and epdm gasketanti corrosive stainless steel toggles for tool less

lamp replacementmounting cradle with protractorconforms to is 10322/ part 5/ sec. 1: 19�7

INSTAllATION mounting with 2 nos., m10 bolts on cradle

PACkINg CASE lOTfloodlight: 1 no.; c.G. Box: 4 nos.; Ballast: 4 nos.

•

•

••

••

•

•

suitable for 2 x 250 w and 2 x 400 w hpsv (t) and mhl (t) lamps

SpecTra [WFZ 66]

electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot cG BoxWFZ 66250 2 x 250 W HPSV (T) 230/ 240 2.6 7.2 01 WGS 56250/16250 (2 nos)WFZ 66400 2 X 400 W HPSV (T) 230/ 240 4.2 7.2 01 WGS 56400/16400 (2 nos)WFZ 66250 2 X 250 W MHL (T) 230/ 240 2.6 7.2 01 WGH 56250/16250 (2 nos)WFZ 66400 2 X 400 W MHL (T) 230/ 240 4.2 7.2 01 WGH 56400/16400 (2 nos)

Please order 2 nos suitable control gear box


ip 65

cat. no. DiM-AWFZ 66250 675WFZ 66400 735

168diM-a

180 c/c

335

422

Ø 10.5 mm holes, 2 nos.

3�

modern trendS in Street Lighting

NEED FOR STREET lIghTINg

a. IMproveS vISuaL conDITIonS on roaD DurIng nIgHTas darkness increases, visual performance deteriorates. road

lighting restores lost performance, enabling shapes and colours to be adequately made out.

a research, focusing on road lighting and accidents, shows that good road lighting improves visual performance and considerably reduces the number of accidents – by 30% overall and by 45% on country roads, and at crossroads and accident black spots.

b. IMproveS nIgHT TIMe SaFeTYwe rely on our eyes for more than �0% of the sensory impressions

we register. so poor visual conditions obviously reduce the amount of information that reaches our brain. that, in road traffic, is extremely dangerous. road lighting thus makes for greater safety at night, because it helps or even actually enables us to fill the gaps in the information we receive.

it is not enough just to maintain the correct lighting level. Brightness also needs to be distributed evenly so that visual tasks – including the “navigational tasks” – can be properly performed. dark patches act as camouflage, making obstacles and hazards hard to make out or completely concealing them from view. camouflage zones occur where too few luminaires are installed or individual luminaires are deactivated or defective.

c. reDuceS nIgHT TIMe accIDenTSGood road lighting improves visual performance and considerably

reduces the number of accidents. doubling the average roadway luminance significantly reduces the number of accidents, that happen at night.

despite lighter traffic, accidents on the roads at night are both more frequent and more serious than during the day. although night time motoring accounts for only 25% of all kilometers driven, nearly 50% of fatal accidents occur during the hours of darkness.

D. reDuceS crIMe DurIng nIgHTGood, correct lighting also prevents crime. experience has

shown that acts of violence and crimes against property are mostly committed in dark, secluded places. those who commit them are less inhibited in such places because there is less risk of being identified and because potential victims are insecure and more vulnerable.

Higher horizontal illuminance – together with high vertical illuminance where the presence of pedestrians is pronounced – makes for better visual perception: suspicious movements are spotted farther away, details and the intentions of approaching figures are made out more clearly. Higher lighting level gives residents a greater sense of security, which makes for a better neighbourhood and a better quality of life.

e. FacILITaTeS TraFFIc FLoWGood street lighting gives the vehicles correct direction, especially

important on country roads. when one is travelling alone on unfamiliar roads, street lighting helps in giving a cue on where one needs to proceed.

•

•

•

•

•

•

•

•

•

daylight – visual performance at peak

night time – visual performance deteriorates


3�

ADDITIONAl PlANNINg REQUIREMENT FOR STREET lIghTINg there are certain supplementary factors which need to be considered while planning lighting for the streets:

conFLIcT areaSconflict areas include all areas where road users typically travel

at speed exceeding 30 km/h and where motorised traffic streams intersect one another or overlap areas frequented by other types of road user. examples are crossroads and t-junctions, pedestrian crossings, cycle path crossings and roundabouts.

conflict areas require a lighting level at least as high as that of the approach road with the highest luminance. where the requirements of the road are generally low, conflict area lighting needs to be raised more than for roads with generally high requirements.

veHIcLeS parkeD aT SIDe oF roaDlighting, here, should aid orientation, and make people, vehicles,

boundaries and obstructions easier to distinguish. Besides, a good level of lighting with high vertical illuminance acts as a deterrent for burglars, car thieves and assailants.

the risk of accidents is reduced by arrangements of supplementary luminaires delivering higher illuminance.

coMpLexITY oF vISuaL FIeLDSthe impact of road lighting can be affected by visual elements in

the visual field, such as advertising boards, roadside kiosks, side trees etc., which may distract or disturb the road user while driving.

aMbIenT ILLuMInancevery bright surroundings, e.g. an illuminated sports facility in the

vicinity, can interfere with visual perception on the road, due to the contrast in lighting levels.

crIMe rISk In areathis is assessed as the ratio of the crime rate in the actual traffic

area to the crime rate in the wider area around it. Higher horizontal illuminance, together with high vertical

illuminance where the presence of pedestrians is pronounced, makes for better visual perception: suspicious movements are spotted farther away, details and the intentions of approaching figures are made out more clearly. fast and reliable identification gives us more time to prepare for danger and react accordingly. a higher lighting level gives residents a greater sense of security, which makes for a better neighbourhood and a better quality of life.

FacIaL recognITIon requIreMenTSpedestrian areas are accepted as “safe” where it is possible to

recognize approaching persons, anticipate their intentions and identify any potential threat.

peDeSTrIan croSSIngSHigh vertical illuminance is required for both the crossing itself

and the waiting areas at either side. this can be delivered by supplementary lighting.

•

•

•

•

•

•

•

•

•

•

CRITERIA FOR STREET lIghTINg AND lAMP SElECTION

crITerIa For SeLecTIng LaMpS:luminous efficacy of lamp – lumens / wattlamp life – service lifelumen maintenancecolour rendering index

crITerIa For SeLecTIng LuMInaIreS:economical Operation (Higher efficiency, proper photometric distribution)

lighting Quality and functionalitymechanical and electrical reliability

(ip protection, lamp-Ballast compatibility)

longer life (material selection, suitability in difficult environmental conditions)

maintenance friendly featureslight control (light pollution and light trespass)

lIghT COlOUR AND COlOUR RENDERINg OF lAMPS

light colour describes the colour of the light radiated by a lamp. colour rendering refers to the effect its light has on the appearance of coloured objects. in outdoor lighting, these two characteristics are of relatively minor importance. even so, it is still advisable to use lamps with good colour rendering properties so that discernible colour contrasts are perceived and information intake is thus maximized.

lamps with poor colour rendering properties, such as low- pressure sodium vapour lamps, are only suitable for pedestrian crossing, seaport and security lighting.

kEY CRITERIA FOR ThE ClASSIFICATION OF ROADS

main users of roadspeed of trafficdensity of trafficOther users and excluded usersintersection densitydifficulty of navigational task

••••

•••

•

••

•

•

••••••


40

Classification Type of Road Average Maintained Illuminance (Lux) Uniformity (Emin/Eavg)

grouP a1 high traffic speed and density 30 0.40

grouP a2 mixed traffic speed and density 15 0.40

grouP b1 considerable traffic – medium speed and density 08 0.33

grouP b2 light traffic and low density 04 0.33

Transverse variation of illuminance for A1 & A2 roads is 33% & for B1 & B2 it is 20% (Emin/Emax)

ROAD ClASSIFICATION – INDIAN PRACTICE

ROAD ClASSIFICATION – INTERNATIONAl PRACTICE

Situation/ Road Classification

Speed of Main User Main Users Other Allowed Users Excluded Users Application Examples

a1 > 60 Km/ hr motorised traffic - slow moving vehicles, cyclists, pedestrians

motorways, roadways for vehicles only

a2 > 60 Km/ hr motorised traffic slow moving vehicles cyclists, pedestrians major country roads with separate cycle roads and footpath

a3 > 60 Km/ hr motorised traffic slow moving vehicles, cyclists, pedestrians

- minor country roads

b1 30-60 Km/ hr motorised traffic, slow moving vehicles

cyclists, pedestrians - trunk roads, through roads, distributor roads

b2 30-60 Km/ hr motorised traffic, slow moving vehicles, cyclists

pedestrians - -

c1 5-30 Km/ hr cyclists pedestrians motorised traffic, slow moving vehicles

cycle paths/ cycle/ footpath

d1 5-30 Km/ hr motorised traffic, pedestrians

slow moving vehicles, cyclists

motorway service areas

d2 5-30 Km/ hr - slow moving vehicles, cyclists

- station forecourts, bus stations, car parks

d3 5-30 Km/ hr motorised traffic, cyclists

slow moving vehicles, pedestrians

- local access & residential streets with speed limit 30 Km/hr, mostly with footpaths

d4 5-30 Km/ hr motorised traffic, slow moving vehicles, cyclists, pedestrians

- - local access and residential streets with speed limit 30 Km/hr, mostly without footpaths

e1 walking speed pedestrians - motorised traffic, slow moving vehicles, cyclists

pedestrian shopping precincts

e2 walking speed - motorised traffic, cyclists

pedestrian & shopping precincts with loading & feeder traffic, home Zones

a1-a2-a3 classified roads b1-b2 classified roads c1 classified roads d1-d2-d3-d4 classified roads


4�

lIghTINg FOR ‘A’ CATEgORY ROADS

objecTIveHigher illumination and uniformityHigh intensity light sourcesno luminaires should be positioned on central verge on bends;

and closer spacing on bends for better visual guidance lighting should be geared up for visual comfort of motoristsroad sides, carriage way and potential hazards should be

clearly visiblespecial attention need to be given to roundabouts

LuMInaIre recoMMenDaTIonS:luminaires with High wattage Hid lamps should be used

- Hpsv lamps - mHl lamps

recommended wattages – 250 w/ 400 w Hpsv/mHlluminaires should have High ingress protection

- ip 65 and aboveluminaires should have sharper cut-Off

- low light pollution - low light trespass

lIghTINg FOR ‘B’ CATEgORY ROADS

objecTIveHigher illumination and uniformityHigh intensity light sourcesluminaires need to be more functional in naturelighting should be geared up more for visual comfort of

motorist as well as pedestrianroad sides, carriage way and possible hazards should be

clearly visibledecorative luminaires can be used on class B roads passing

through residential areas

LuMInaIre recoMMenDaTIonS: luminaires with High wattage Hid lamps should be used.


recommended wattages – 150 / 250 w Hpsv/mHlluminaires should have High ingress protection

- ip 65 and aboveluminaires should have sharper cut-Off

- low light pollution - low light trespass

•••

••

•

•

••

•

••••

•

•

•

••

•

lIghTINg FOR ‘C’ AND ‘D’ CATEgORY ROADS

objecTIvecomparative lower illumination but higher uniformitymedium intensity light sourceslighting should be done considering visual

requirements of slow moving users sufficient illuminations on side footpaths/ roads for prevention of crimeroad sides, carriage way, possible hazards should be clearly visibleavoid light trespass in residential buildingsuse luminaires with urban design

LuMInaIre recoMMenDaTIonS:luminaires with medium wattage Hid lamps should be used


recommended wattages – 70/ 150 w Hpsv/ mHlluminaires should have High ingress protection - ip 65 and aboveluminaires with vandal resistant design should be preferred

lIghTINg FOR TRAFFIC CAlM ROADS (E1/E2 CATEgORY)

lighting should be mainly for protection of walking pedestrianit should be provided to get better facial expression it should be with urban style lightingroad symbols should be more prominently displayedarchitectural and decorative aspects need to be considered

while selecting light fitting

•••

••••

•

•••

•••••


42

International Code Wattage (W) Length (mm) Diameter (mm) Lamp Holder Luminous Flux (Lumen)/ Intensity (Cd)

Colour Temp. (K) Colour RenderingIndex (CRI Group)

COMPACT FlUORESCENT lAMPS

tc-L 36 411 - 2G11 2750 6500 1b36 411 - 2G11 2900 4000 1b36 411 - 2G11 2900 3000 1b36 411 - 2G11 2900 2700 1b

FlUORESCENT lAMPS (TRI-BAND PhOSPhOR TYPE)

t8 36 1200 - G13 3250 6500 1b36 1200 - G13 3350 4000 1b

METAl hAlIDE lAMPS

hPSV (e) 70* 156 72 e27 5600 2000 20150 227 92 e40 14500 2000 20250 227 92 e40 27000 2000 25400 292 122 e40 48000 2000 25

hPSV (t) 150 211 47 e40 15000 2000 25250 257 47 e40 28000 2000 25400 283 47 e40 48000 2000 25

hQi-e/ MhL (e) 250 226 90 e40 19000 5200 1a400 285 120 e40 34000 4400 2b400 290 120 e40 26000 5500 1a

hQi-t/ MhL (t) 250 225 46 e40 20000 5200 1a400 273 46 e40 34000 4000 2b

400 285 62 e40 27000 5900 1b

hit-de/ hQi-tS 70 114.2 20 rx7s 5100 3000 2a70 114.2 20 rx7s 5700 4200 1b150 132 23 rx7s-24 11700 3000 2a150 132 23 rx7s-24 12000 4200 1b

hPMV 80 152 70 e27 3500 4200 48125 173 75 b-22d3 6200 4100 46125 173 75 e27 6200 4200 46250 227 90 e40 12700 4100 45400 290 120 e40 22000 3900 45

* 70 w hpsv (e) lamps are available with both internal starter as well as without internal starter

data provided is indicative. please refer lamp manufacturer’s data for lighting design calculations.

LamP information


branchaddreSSeS

NORTh

F-16, okhla Industrial area, phase I, new delhi - 110 020Tel: 011-41708121 - 30; Telefax: 011 - 41708121email: [email protected]

S.c.o. - 188-190, Sector - 34a, chandigarh - 160 022Tel: 0172-2661355/ 2660714/ 2667586; Fax: 0172 - 2648426email: [email protected]

e/149, Transport nagar,Lucknow kanpur road, lucknow - 226012Tel: 0522-2434734/ 2434352email: [email protected]

b-16/17, palsania complex, near T b Hospital, Subhash nagar Shopping centre, Jaipur - 320016Tel: 0141-2280014/ 2280289email: [email protected]

6-j, compound, Lasudia Mori, opp.police Station, indore - 457371Tel: 0731-2802463, 5023486email: [email protected]

western up/ uttarakhandHaridwaremail: [email protected]

SOUTh

no.139, 7th cross, n S palya, off: bannerghatta road, Bangalore - 560076Tel.: 080-41503260 - 68. Fax: 080 - 26781232email: [email protected]

Door no 33 & 34, pvg complex,gk Industrial estate, ganesh nagar, alapakkam chennai - 600116Tel: 044-32518016/ 24769653email: [email protected]

no.41, chokkampudur Main road, Sriram nagar, Telungupalayam post, coimbatore - 641039Tel: 0422-2477841/ 2478751 email: [email protected]

2nd Floor, kummancherry Hardwares building, opp. Hotel Sea gate, pathadipalam,South kalamassery, changampuzha nagar po, cochin - 682033Tel: 0484-4014556 - 57email: [email protected]

madurai (Tamilnadu)email: [email protected]

mangalore (karnataka)email: [email protected]

EAST

3, pretoria Street, 3rd Floor, Kolkata - 700071Tel: 033-22828489/ 9891; Fax: 033 - 22825912 email: [email protected]

WEST

Wilson House, 3rd Floor, nagardas road, andheri (e), mumbai - 400069Tel: 022 - 66941056 - 8, Fax: 022 - 66941060 email: [email protected]

203/ 204, Hindustan kohinoor complex, next to Hcc, LbS Marg, vikhroli - West, mumbai - 400083Tel: 022- 67213755email: [email protected]

CENTRAl

bhosale Heights, 1195/5, Fergusson college road, pune - 411005Tel: 020 - 25510583/ 25535081; Fax: 020 - 25535401email: [email protected]

a/210, Fairdeal House, opp. St. xavier’s Hostel, Swastik char rasta, navrangpura, ahmedabad - 380009Tel: 079 - 26400809/ 66051628email: [email protected]

311, pujer complex, Subhanpura, Baroda - 390023Tel: 0265 - 2395830/ 35/ 36/ 41/ 45; Fax: 0265 - 2331459email: [email protected]

103, Shriniketan apartments, nargunkar layout, Deo nagar, khamla road nagpur - 440015.Telefax: 0712 - 2233562email: [email protected]

plot no., 13 a/ 1, road no 9, IDa east Division nacharam, r. r. District,Hyderabad - 500074Tel: 040 - 27178906/ 27178905email: [email protected]

D. no. 1 - 99, Sirigudinagar, Yendada,visakhapatnam - 530045Tel: 0891 - 2720030/ 2528420email: [email protected]

cu4, advani business centre, neelkamal arcade,atmaram broker road, above Federal bank, panjim, Goa - 403001Tel: 0832 - 6650404email: [email protected]

c/o. Hindustan agenciesplot no. 135, Mancheswar Industrial estate,Bhubaneshwar - 751010Tel.: 0674 - 6450804email: [email protected]

rajkot email: [email protected]

khasra no.1470/81, p H no.106,ring road no.1, near jagdamba Mandir,opp Hotel new relax, kushalpur,raipur - 492001Tel: 0771 - 2426601/ 4056137email: [email protected]

buSIneSS oFFIce:

wipro Lighting5th Floor, godrej eternia - c,old pune - Mumbai road, Shivaji nagar,pune - 411 005Tel : +91.20.6609 8700Fax : +91.20.6609 8777email : [email protected]

regISTereD oFFIce:

wipro LimitedDoddakannelli, Sarajpur road,bangalore - 560 035Tel : +91.80.2844 0011Fax : +91.80.2844 0057

www.wiprolighting.comInnovation and Improvement are a way of life at Wipro. We reserve the right to modify the product without prior intimation.

WIPRO lIghTINg ADVANTAgE

innovative lighting solutions for streets & public spaces through:

• energy saving solutions with latest international technologies

• capability to service multi-locational accounts

• service commitment : more than 20 branches and over 150 dedicated stockists

• ease of contact through help-line (toll free) and website

• trustworthiness and reliability of wipro

Documents

cover page - Saveurja for Streets and Public spaces.pdf · cuStomer SPeak “Wipro Lighting has been at the forefront of offering leading edge technologies. I recommend Wipro Lighting