CPC rate contract Gr -A-B-D-E-18-05-20 - OUAT

ODISHA UNIVERSITY OF AGRICULTURE & TECHNOLOGY, BHUBANESWAR 751003

1

No. 585 / CAET, dt. 31.03.2020 NOTIFICATION

With reference to Tender call notice no. No 16/CAET dated 3rd Jan 2020 and 361/CAET, 22nd Feb 2020 of OUAT and subsequent approval of the higher authority, rate contract of the following laboratory equipment, instruments, Field Machineries, miscellaneous items, etc. (Group-A, Group B, Group D & Group E) has been finalised. The rate contract for different items shall remain valid till 31.03.2021 or till the finalisation of the next rate contract for the specific item, whichever is earlier. Order should be placed with due approval of the competent authority after following rules and regulation of the University. The indenter should obtain an undertaking from the supplier that equipment costing more than Rs. 5/- lakhs is not obsolete and parts and service has to be provided for at least for next 10 years by the supplier/ manufacturer. Indenter may check the make, model and technical specification with the hard copy available with the chairman, CPC. Any discrepancy in the rate contract should be brought to the notice of the Chairman immediately for taking further action. Tax Deduction at Source (TDS) as per No.Pen-I-38/18 23444/UAT, dt.04.10.2018 For availing GST concession/customs duty exemption, necessary certificates like End User Certificate & certified DSIR certificate may be submitted to the supplier as per requirement. Payment should be made after obtaining performance bank guarantee (10%) as per the Annexure I and II, as the case may be. Standard installation certificate should be made before payment as per Annex. III. Sd/-

CHAIRMAN, CENTRAL PURCHASE COMMITTEE and DEAN, CAET Memo No. 585(1)/ CAET, dt.31/03/2020 Copy forwarded to all Deans/ Directors/ Associate Dean, C.A.,Chiplima/ Bhawanipatna/ CH, Chiplima/ AII HoDs/ Controller of Examination/ Medical Officer, OUAT Health Center/ Chief Librarian, Central Library/ All ADRs, RRTTS/AII Programme Coordinators, KVK/AII Officer-in-Charge, RRTTSS & Projects by e-mail.

CHAIRMAN, CENTRAL PURCHASE COMMITTEE and DEAN, CAET

Memo No. 585(2)/ CAET, dt.31/03/2020 Copy forwarded to Registrar/Comptroller, OUAT, Bhubaneswar for information and necessary action.


Memo No. 585(3)/ CAET, dt.31/03/2020 Copy forwarded to DPME, OUAT, Bhubaneswar for information and necessary action. He is requested to upload the entire notification in OUAT website.


Memo No. 585(4)/ CAET, dt.31/03/2020 Copy forwarded to the Secretary to Vice Chancellor, OUAT for kind information of the Hon'ble Vice Chancellor. Condolence



2

GROUP A: LABORATORY EQUIPMENTS

A-1: Low volume Concentrator

1.,Bench Top Type with Nitrogen Cylinder, 2. Evaporation medium : Nitrogen Gas 3. Sample volume : 1 ml to 30 ml size, 4. Min No of samples : 50 5. Nitrogen Control valves with ON/OFF Switches, 6. 50 nitrogen –dispending nozzle in five horizontal rows 7. Easy ON/OFF switches to turn Nitrogen Flow on or off to the nozzle above the sample vials 8. Gas regulator range : 0 to 100 PSI (approx), 9. Pressure gauge range : 0 to 100 PSI 10. Controlled: Fully Automatic Microprocessor based, 11. Variable time and Temp setting arrangement 12. Display: LCD Digital temp & time 13. Time Range: 15 sec to 10 hours 14. Temperature range: Ambient to 100 ºC (thermal cutout for safety) 15. Start/stop : Green LED indication when process is On 16. Power supply : 230 V AC / 3Amp 50 Hzs 17. Error indication : LED indication with Buzzer 18. Easy ON/OFF switches to turn Nitrogen Flow on or off to the nozzle Side Handles for easy movement 20. SS 316 tank & Nozzle for durability and maintenance free 21. Efficient & adjustable ventilation with Built-in exhaust fan with blower 22. Flexible Transparent gas Path Tubing 23. Snap fitting 8mm OD Flexible Polyethylene Tubing for nitrogen supply 24. Audible alarm with automatic shut down for timed end point 25. All mechanical components are isolated from the chemical fumes and vapors for longer life. 26. Standard fittings like Nuts, Ferrules, Union, Couplings, clamps, Hardware Hose Pipe, Cable etc. 27. Two Nos. of Nitrogen cylinders with regulator and all other accessories. 28. Suitable Online UPS with minimum 45 min. back up to be supplied. GSTN 21AAFCK0803K1ZZ PAN AAFCK0803K Make PCI Analytical Pvt.Ltd. Model EV PLUS 50 Price, Rs. 367800 Discount, Rs. - Price after discount, Rs. 367800 Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 18390 warranty 3 YEARS Onsite delivery price, Rs. Rs.3,86,190/- Order to be placed with: M/S PECK BIOTECH PRIVATE LIMITED,N1/14,IRC Village Nayapalli,BBSR-751015

A-2: 2D ELECTROPHORE SIS SYSTEM

PROTEAN i12 IEF System 2D electrophoresis system having isoelectric focusing (IEF) proteins, run 1–12 IPG strips in 7, 11, 13, 17, 18, or 24 cm focusing trays. Each channel in the isoelectric focusing tray is independently powered, enabling precise control over each IPG strip Run gel side up, gel side down, or with loading cups — focusing trays and electrode assemblies accommodate all possible gel configurations.


3

System with 90–240 VAC, includes basic unit, positive and negative electrode assemblies, more than 7 cm, 11 cm, and 17 cm focusing trays with IPG strip retainers, 1 pack each of 7 cm, 11 cm, and 17 cm 3 styluses, pH 3–10 , IPG strips in 7 cm, 11 cm, and 17 cm lengths, 12, 13, 18 & 24 cm focusing tray, GSTN 21AFLPD1412R1ZM PAN AFLPD1412R Make BIO-RAD, USA Model 164-6000 Price, Rs. 1428570 Discount, Rs. - Price after discount, Rs. 1428570 Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 71429 warranty 3 years Onsite delivery price, Rs. Rs.14,99,999/- Order to be placed with: M/s Bio-technika, plot No-848, Sudarsan Palace-II, Madhusudan Nagar, Unit-IV, Bhubaneswar-751001, Odisha

A-3: MICRO PLATE READER

On board software, featuring an intuitive user interface, preset or customized end point and kinetic analysis protocols, powerful curve fittings routines and statistical analysis. • Test protocol and reporting for transmission • Ability to read flat U, V Bottom and micro-plate with 12 channel strips. • Automatic calibration • Single and dual wave length detection Motorized door for plate loading & retrieval • Integral thermal printer • Built in variable speed plate shaking capability OPTICAL SPECIFICATIONS: Spectral range: 340 – 850 nm Photometric method: Single/dual wave length Photometric range: 0 – 3.0 OD. Bandwidth : more than 10 nm Resolution : more than 0.001 OD Measurement range: 0 – 2.5 at 405 nm Accuracy : 1% Linearity : 1% Light source: Tungsten halogen lamp (20W) Warm up time : 3 min. Shaking speed : 3 speeds(low, medium,high) Data storage : Calendar / clock function, 50 assay protocol. Filters : 410, 450, 490, 595, 655, 750 Reading speed: 6 seconds/96 well plate Interfaces : Serial Interfaces RS–232 & parallel interface Shaking : Shaking with 3 modes also available Other specification as per submitted GSTN 21AJPPD1174J1ZE PAN AJPPD1174J Make Thermo Fisher scientific Model 51119100 Price, Rs. 370000 Discount, Rs. -- Price after discount, Rs. 370000


4

Packing, forwarding, insurance etc., installation charges, Rs. YES Taxes: GST @5% against DSIR certificate, Rs. 18500 warranty 3 years Onsite delivery price, Rs. Rs.3,88,500/- Order to beplaced with M/s Pristine Bio Chemical, Plot-689/9, Nayapalli, Behera Sahi, Bhubaneswar-751012

A-4: CHEMIDOC

Molecular Imager ChemiDoc System with suitable PC, camera, darkroom, UV transilluminator, epi-white illumination, cables, firewire card, Software, instructions and UPS. Specification: CCD based Imager with CCD Resolution more than 4 Mega Pixels, Pixel Density : 16-bit Pixel size (HxV) more than 4.5 x 4.5 micrometre Max Sample size: - 25 X 35 cm Camera Cooling sysem upto -250C. Motorized zoom lens, C-mount, f/1.0 -1.2, 10 - 70mm Illumination modes: Trans-UV, Trans-white and epi-white Excitation source: 300 standard, Incorporates Multidye technology with Filter sliders options positions: Flouroscence:2, Chemiluminescence:1 with emission filters Quantum efficiency at 425 nm (chemiluminescence)- 50% Quantum efficiency at 600nm (EtBr)- 55 % Peak quantum efficiency- 70 % Fluorescence application (EtBr, SYBR Green, SYPRO Ruby, Flamingo fluorescent gel stains) Colorimetry application (Coomassie Blue, Silver stain, blots, prestained markers) GFP, colorimetric Chemiluminescence Fluorescent western blots Gel alignment templates, and software acquisition. 3 D Viewer Resolves closely spaced bands and detects signals from a wide range of sample intensities to Size and quantify proteins of interest and produce publication quality data and images Image Lab software: Unsurpassed automation of the image capture and analysis for Proteins and nucleic acids gels electrophoresis and blotting To be supplied with 2 KVA on line UPS with standard back up (30 mints) with branded computer and suitable printer Illumination multiplexing optional GSTN 21AFBPR4974E1ZK PAN AFBPR4974E Make Synoptics Ltd (UK) Model G:BOX-CHEMI-XRQ Price, Rs. GBP 9900 Discount, Rs. - Price after discount, Rs. GBP 9900 Packing, forwarding, insurance etc., installation charges, Rs. GBP 350 Taxes: GST @5% against DSIR certificate, Rs. GBP450 (Customs clearing charges) warranty 3 years Onsite delivery price, Rs. GBP 10700/- = Rs.10,05,800/- Taking 1

GBP = Rs.94 approx. Order to be placed with: M/S Science Solutions, VIM-460, Sailashree Vihar, Chandrasekharpur, Bhubaneswar-751021


5

A-5: Portable Ultrasound Scanner

Portable Colour Doppler Ultrasound Scanner with multi frequency Transrectal probe and additional convex probes (microconvex) and linear one between 3.5 to 10.0 MHz. Extended pure harmonic detection (ExPHD) Technology, Viewing monitor should have minimum 10 inch diagonal LCD with Tilt angle variable, equipment should have both B and M mode for image display, should support Electronic convex probe and linear probe, at least 6 step STC/TGC gain adjustments, Real time magnification up to 6 times minimum, cine loop memory, should have 2 USB port for flash drives, inbuilt nonvolatile image memory of 1000 frames and at least 4 sets of independent measurement calipers. The system must have the ability to function by AC/DC or battery power with the same degree of functionality, the battery life (run time) shall be atleast 2 (Two) hours GSTN 21AAFCK0803K1ZZ PAN AAFCK0803K Make BPL Medical Technologies Model E CUBE i7 Price, Rs. 13,20,000 Discount, Rs. - Price after discount, Rs. 13,20,000 Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 66,000 warranty 3 YEARS Onsite delivery price, Rs. Rs.13,86,000/- Order to be placed with: M/S PECK BIOTECH PRIVATE LIMITED, N1/14, IRC Village Nayapalli, BBSR-751015

A-6: Band Sealer

Heavy duty continuous Band Sealing with variable speed Speed: 0 to 10 meters/ minute, Sealing width: 5-10mm Temp range: 0-300 deg C, Max coveyor loading: 3kg (approx) Inbuilt gas flushing Inbuilt date and batch code embossing GSTN 21AAMFS1533N1Z3 PAN AAMFS1533N Make Royal Pack Industries Model CSM-1000-H Price, Rs. 174762 Discount, Rs. - Price after discount, Rs. 174762 Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 8738 warranty 3 years Onsite delivery price, Rs. Rs.1,83,500/- Order to be placed with: M/s Sheet Profile Company, Gosani Nuagan, Main Road, Berhampur, Ganjam 760003, [email protected]


6

A-7: Vacuum Packaging Machine for food

A-8: Pulveriser (paste)

Suitable to make paste by pulverising fruit and vegetables like ginger, garlic, onion, carrot, cashew nut etc. (SS 304) Capacity: 100 kg /hr (approx) Contact parts: food grade SS Inbuilt water jackatted head With electric motor and control system Suitable for continuous operation of 8 hours without break 5 HP 3phase GSTN 21AAMFS1533N1Z3 PAN AAMFS1533N Make Sree Valsa Engg.Co. Model SELVIN512 Price, Rs. 231000 Discount, Rs. - Price after discount, Rs. 231000 Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 11550 warranty 3 years Onsite delivery price, Rs. Rs. 2,42,550/- Order to be placed with: M/s Sheet Profile Company, Gosani Nuagan, Main Road, Berhampur, Ganjam 760003, [email protected]

a) Should have SS304 chamber b) Sealing length: 100 to 500 mm or better c) Sealing width: 10 mm (approximately d) Double sealing e) Transparent window for vacuum chamber f) Should have facility for selecting variable vacuum g) Should have facility of selecting different temperature h) Should automatically vacuum, flush gas and seal i) Should be able to operate for continuous use for 6 to 8 hours without break j) Minimum packing cycle should be 2 to 4 cycle per minute

With gas flushing system inbuilt GSTN 21AAMFS1533N1Z3 PAN AAMFS1533N Make Royal pack industries Model VSM 500 Price, Rs. 210000 Discount, Rs. - Price after discount, Rs. 210000 Packing, forwarding, insurance etc., installation charges, Rs. Taxes: GST @5% against DSIR certificate, Rs. 10500 warranty 3 years Onsite delivery price, Rs. Rs.2,20,500/- Order to be placed with: M/s Sheet Profile Company, Gosani Nuagan, Main Road, Berhampur, Ganjam 760003, [email protected]


7

A-9: Dry Pulveriser

a) Suitable for dry grinding of wheat, spices, besan b) Multipurpose pulveriser (beater type with different screen) c) Capacity: 20 to 60 kg/h with feeding hopper and feed control arrangement d) Body: Stainless steel e) With single phase motor (3 HP), overload protection

GSTN 21AAMFS1533N1Z3 PAN AAMFS1533N Make Sree Valsa Engg.Co. Model SELVIN512 Price, Rs. 210000 Discount, Rs. - Price after discount, Rs. 210000 Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 10500 warranty 3 years Onsite delivery price, Rs. Rs. 2,20,500/- Order to be placed with: M/s Sheet Profile Company, Gosani Nuagan, Main Road, Berhampur, Ganjam 760003, [email protected]

A-10: Trinocular Research Microscope with HD Camera (photomicrographic attachment)

Trinocular Research Microscope specifications: a) Viewing Head: 360° Rotatable sidentop trinocular head interpupillary b) Distance: 48mm-75mm. c) Eye piece: Wide field eye piece WF10X/20mm with dioptre adjustment. d) Objective: Infinity plan objective: 4X, 10X, 40X, 100X (oil). e) Nosepiece: Quadruple Nosepiece (Backward) f) Stage: Double layer Mechanical Stage, 142mmx140mm/76mmx50mm. g) Condenser: Sliding –in centerable condenser N.A. 1.25/N.A. 0.9 h) Focusing: Co axial coarse and Fine adjustment moving range 20mm, Fine division 0.002mm. i) Illumination: LED brightness adjustable j) up-gradable: to Phase contrast, Dark field, Fluorescent and Polarizing microscope. k) HD CAMERA (Photomicrographic attachment) specifications (Dazzler HI-D 5.0 MP HD)

l) Camera type: CMOS HD CAMERA – 5.0 MP 5.0MP（2592×1944 with image analysis Software. Dgsoft proMED Ver 5.06 Image Analysisi & measurement software

a) High sensitivity, low noise with excellent color correction b) USB live video transfer c) Compatible with Windows 7/8/10 d) Easy and fast software installation e) User‐friendly and sophisticated image processing applications f) Premium optical lens adapter Image Sensor : 1/2.5″CMOS (HD) g) Valid Pixel : 2592×1944 (5.0M ) Digital Output : 24–bit (color) Image Format h) frame rate : 2592×1944 2.5 f/s 1024×768 10 f/s i) Sensitivity : 0.53v @ 550um/lux/s j) SNR : 40dB k) Exposure : Auto/Manual Exposure White l) Balance : Auto/Manual White Balance


8

m) Working Temperature : -30°C ~ 70°C n) System : Win7/Win8/ Win10 32bit or 64bit.

GSTN 21ABRPC6639F1ZR PAN ABRPC6639F Make LABOVISION Model KXi 2000 Price, Rs. 129600 Discount, Rs. 6,500/- Price after discount, Rs. 1,23,100/- Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 6,155 warranty 3 years Onsite delivery price, Rs. Rs.1,29,255/- Order to be placed with: M/s Orissa Scientific company, High court square, Cuttack 753002, 0674-2509077, [email protected]

A-11: Cooling centrifuge

-8 deg C , with R244M-12x1m ml angle rotor & R248M-24x1.5ml angle head & VS-03 voltage stabiliser GSTN 21AAACL5586D1ZS PAN AAACL5586D Make Remi Model C-24 plus Price, Rs. 2,22,000 Discount, Rs. - Price after discount, Rs. 2,22,000 Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 11,100 warranty 3 years Onsite delivery price, Rs. RS.2,33,100/- Order to be placed with: M/s Lab Chemical pvt. Ltd, P.B.No 14, Unit IV market complex, Shop no. W/5, Bhubaneswar 751001, [email protected], 0674-2506676

A-12: Homogeniser

Suitable for homogenising juice, pulp etc. 100 l/h Double stage200kg/cm2, WP: 175kg/cm2 960 rpm Plunger dia:20mm, 3 nos. Homogenizing speed 235 stokes/m, 5hPsquirel cage motor Three phase 440 V, 2kW Capacity: 100 liter/h (approx) Pressure: upto 60 Mpa All contact parts to be food grade SS Homogenizer chamber should be made of single piece forged AISI 303 block with suction/discharge valves and diaphragh type pressure gauge

Complete with control panel GSTN 21AGZPD9094N1ZK PAN AGZPD9094N


9

Make SANA Model SA-HM-8(H) Price, Rs. 4,70,000 Discount, Rs. - Price after discount, Rs. 4,70,000 Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 23,500 warranty 3 years Onsite delivery price, Rs. RS.4,93,500/- Order to be placed with: M/s Rashmita Traders, 1997-B,1st floor,Lingaraj Nagar,Old Town,Bhubaneswar 751002

A-13: Rice puffing machine

Cap: 50-75kg/.h 0.5hp 3 phase Continuous rotation Heating by LPG Feeding: hopper- 25 kg with vibration Keypad control system GSTN 22AABFY9654R1ZC PAN AABFY9654R Make Yash Engineering Model LPG 50kg 2019 Price, Rs. 172000 Discount, Rs. - Price after discount, Rs. 1,72,000 Packing, forwarding, insurance etc., installation charges, Rs. - Taxes: GST @5% against DSIR certificate, Rs. 8,600 warranty 3 years Onsite delivery price, Rs. Rs.1,80,600/- Order to be placed with: M/s Yash Engineering,Vill:Kusmi, Po: Salhebhata, Tah:Bagbahara, Dist: Mahasamud,Chatisgarg 493449, [email protected], 7771044048


10

GROUP B: FARM EQUIPMENTS B-1: Fuel Consumption Meter with GPS system

Suitable to be fitted with tractor and power tiller and monitoring from anyplace, including laptop and software Make WAGENCONTROL Model DFM100D485 GSTN PAN warranty 4 years Price Rs 5,80,000 Discount - Price after discount Rs 5,80,000 Packing, forwarding,insurance etc., installation charges - Taxes: GST @5% against DSIR certificate Rs 29,000 Onsite delivery price (Rs. Rs 6,09,000 Order to be placed with: M/s N K Instruments, 28/5, Convent Road, Ground Floor, Kolkata-700014

B-2: Plasma Cutting Machine

Table Size: 3000 X 4000 mm, Plate Cutting length & width: 3100 x 1600 mm CNC Controller: Hi Tech Globus 10.1”,Positioning speed: up to 12000 mm/min Plasma Torch Station: Plasma AVC with HIS, Motor and Drives: Digital AC servo drive Plasma Source: PMX 85 with professional nesting software and CNC Controller software, Cutting Table with suction blower to blow out smoke and dust, Including installation Make Vermani Electromech Model Finecut DGT1500 GSTN 21AAMFS1533N1Z3 PAN AAMFS1533N Warranty 1 year Price Rs. 30,15,000/- Discount - Price after discount Rs. 30,15,000/- Packing, forwarding, insurance etc., installation charges - Taxes: GST @5% against DSIR certificate Rs. 1,50,750/- Onsite delivery price (Rs. Rs. 31,65,750/- Order to be placed with: M/s Sheet Profile Company Gosani Nuagan, Main Road, Berhampur, Ganjam 760003

B-3: Hydraulic Press

Capacity - 100 T, Motor - 15 hp, Oil tank - 100 Lt, Spindle travel; 8”, Bed: 24” X 24” Die for capsule punching, round punching & angle cutting Make Jyoti CNC Automation Ltd. Model DX 200-4A GSTN 21AAMFS1533N1Z3 PAN AAMFS1533N


11

Warranty 1 year Price Rs. 4,72,100/- Discount - Price after discount Rs. 4,72,100/- Packing, forwarding,insurance etc., installation charges - Taxes: GST @5% against DSIR certificate Rs. 23,605/- Onsite delivery price (Rs. Rs. 4,95,705/- Order to be placed with : M/s Sheet Profile Company Gosani Nuagan, Main Road, Berhampur, Ganjam 760003

B-4: CNC Lathe

Swing over bed dia: 428 mm Maximum turning length(with chuck): 300 mm Maximum turning dia: 280 mm Spindle speed: 4500-5000 rpm With controller and all accessories (Fanuc Oi TF) Make Maxturn Model Plus+ GSTN 33AAACM2543B1Z7 PAN AAACM2543B Warranty 3 year Price Rs 23,48,200/- Discount Rs. 3,58,200/- Price after discount Rs. 19,90,000/- Packing, forwarding,insurance etc., installation charges Rs. 1,21,500/- Taxes: GST @5% against DSIR certificate Rs. 99,500/- Onsite delivery price (Rs. Rs. 22,11,000/- Order to be placed with: MTAB Engineers Pvt Ltd, G 26A, SIDCO Industrial Estate, Kakkalur, Thiruvallur-602003, Tamilnadu

B-5: Torque Transducer

Contactless transmission Measurement of rotating parts Cylindrical shaft ends Nominal (rated) torques - 200 Nm, Nominal (rated) rotational speed : up to 8000 rpm Accuracy class : 0.5 % or better, Torque measuring system (voltage) Supply voltage : 18-26 V (D.C.) Voltage output : 0-10 V (D.C.) Linearity error including hysteresis, related to nominal (rated) sensitivity: ± 0.5 % FSO Degree of protection per EN 60529 : IP 40 Operating temperature range : 10- 600C With accessories : Female cable connector with solder log 12 pin Connecting cable : Length 5 m, 12 pin – flying leads Torsional rigid coupling both end Make KISTLER, GERMANY Model 4520A200


12

GSTN 19ACVPN1810E1Z1 PAN ACVPN1810E warranty 3 years Price Rs. 3,42,000/- Discount - Price after discount Rs. 3,42,000/- Packing, forwarding,insurance etc., installation charges - Taxes: GST @5% against DSIR certificate Rs. 17,100/- Onsite delivery price (Rs. Rs.. 3,59,100/- Order to be placed with : M/s N K Instruments, 28/5, Convent Road, Ground Floor, Kolkata-700014

B-6: Groundnut Pod cleaning-cum-grading unit with complete set

Capacity – 1 ton/hr Rotary Grader with Blower, 3 phase 5HP motor 1440 rpm, Pulley,frame, hopper & outlet Screen (1st 6mm hole, 2nd & 3rd 11mm round hole, one extra 8 mm andanother extra 14mm) made up of 18 gauge sheet.Bucket elevator 21 feet height with 3 phase 2HP motor 1440 rpm,frame, pulley, bucket, and belt, Flat screen round grader (centrifugal type) with frame, 3 phase 2HPmotor 960 rpm, pulley and accessoriesWith all accessories, transportation, foundation, installation and commissioning Make Parmar Brand Model Parmar Brand GSTN 24AACFP9162C1ZG PAN AACFP9162C Warranty 3 years Price Rs 3,85,500/- Discount - Price after discount Rs 3,85,500/- Packing, forwarding,insurance etc., installation charges Rs 1,00,000/- Taxes: GST @5% against DSIR certificate Rs 19,250/- Onsite delivery price (Rs. Rs 5,04,250/- Order to be placed with: M/s PARMAR Iron Works, Near new bus stand, Atkot Road, Jasdan-360050

B-7: Groundnut digger cum-shaker

With V-shape cutting blade suitable for 540 PTO rpm of tractor Make Sahu Industries Model SIJGDS-1 GSTN 21DMDPS3694J1JP PAN DMDPS3694J Warranty - Price Rs 1,25,000 Discount - Price after discount Rs 1,25,000/- Packing, forwarding,insurance etc., installation charges Rs 10,000/- Taxes: GST @5% against DSIR certificate Rs 6,250/- Onsite delivery price (Rs.) Rs 1,41,250/- Order to be placed with: M/s Sahu Industries, MG Chowk, Jeypore-764001


13

B-8: Groundnut thresher

Suitable for both dry and freshly harvested crop, tractor operated suitable for 35 hp tractor Make Sahu Industries Model SIJGNT-1 GSTN 21DMDPS3694J1JP PAN DMDPS3694J Warranty 3 years Price Rs 2,14,285/- Discount - Price after discount Rs 2,14,285/- Packing, forwarding,insurance etc., installation charges Rs 10,000/- Taxes: GST @5% against DSIR certificate Rs 10,714/- Onsite delivery price (Rs. Rs 2,34,999/- Order to be placed with: M/s Sahu Industries, MG Chowk, Jeypore-764001

GROUP-D COMPUTERS, PRINTERS, NETWORKING AND OTHER ACCESSORIES

D-1: HPC (High Performance Computing Cluster)

(a) Master Node

Form factor: 2U rack mountable CPU: 2 x Intel Xeon-Gold 6238 (2.1GHz/22-core/140W) Processor Motherboard: Intel C621 /higher series chipset Memory: 288GB DDR4@2933MHz, 24 DIMM slots or higher Memory protection: Advanced ECC with multi-bit error protection, Online spare, mirrored memory HDD: 2 x 480GB SSD RAID controller: PCIe 3.0 based 12Gb/s SAS Raid Controller with RAID 0/1/1+0/5/50/6/60 (onboard or on a PCI Express slot) Networking: 4 port 1G Ethernet, 2 x 10G Ethernet, 1 x 100G IB-EDR/OPA Storage Networking: Dual port SAS/FC HBA Interface: Micro SD slot (1 no), USB 3.0 (5 no’s) Bus Slots: Three PCI-Express 3.0 slots, at least two x16 PCIe slots Power Supply: Hot plug redundant low halogen power supplies, minimum 90% efficiency. Cooling: Redundant hot-plug system fans Management: a) System remote management should support browser based graphical remote console along with Virtual Power button, remote boot using USB/CD/DVD Drive. It should be capable of offering upgrade of software and patches from a remote client using Media/image/folder; It should support server power capping and historical reporting and should have support for multifactor authentication. b) Server should have dedicated 1Gbps remote management port. c) Remote management port should have storage space earmarked to be used as a repository for firmware, drivers and software components. The components can be organized in to install sets and can be used to rollback/patch faulty firmware d) Server should support gentles management using the out-of-band remote management port. e) Server shall provide insights, forecasting and recommendations for quicker problem resolutions including automating case creation for enhanced service experience Warranty: 5-year Parts, 5-year labour, 5-year onsite


14

(b) Computer Node

Support with NBD Hardware replacement GSTN 21AAACE6958LIZG PAN AAACE6958L Make HPE Model HP-DL380 Basic Price of each Rs. 11,21,500.00 (Without GST) Total cost of equipment Rs. 11,21,500.00 Educational discount NIL Price after discount Rs. 11,21,500.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment Rs. 56,075.00 Standard Warranty provided Yes (5 Years) Extended warranty/CAMC After warranty period

AMC for 1st year= 21% of Basic price AMC for 2nd year= 22% of Basic price AMC for 3rd year= 23% of Basic price AMC for 4th year= 24% of Basic price AMC for 5th year= 25% of Basic price GST @ 5% Extra will be charged

Any other Taxes/ Charges (if any) NIL On Site Delivery price Rs. 11,77,575.00 Order to be placed with: M/s- Embee Software Pvt. Ltd., A-154, Second Floor, Eastern Block, Sahid Nagar,, Bhubaneswar-07, [email protected], [email protected], 0674-2540550(O), 9437364173/9337126529(M), 0674-2540550(O)

Compute Node Chassis Requirement: (Set of 4 servers with enclosure) Vendor should offer a Server chassis / enclosure based solution which can hold dense servers(Pure CPU based compute nodes) on an average of 0.5U per Server, capable of getting mounted in a standard 19" 42U Rack (max depth of 1000mm). Each of the Server nodes should be individually serviceable, without shutting down the other Server nodes. Any blank slots in the Chassis as part of the solution shall not be counted to work out the average of .5U per Server. The entire solution should be offered with redundant power supplies at enclosure level. The offered Power supplies shall be with minimum 2000W per Power Supply. The offered Power supply Wattage should be such that failure of one power supply, should not throttle rest of the servers. The chassis / enclosure should be configured with redundant fans Compute Node Requirement: (Each of the compute nodes in the chassis/enclosure should be configured with the following) CPU: 2 x Intel Xeon-Gold 6238 (2.1GHz/22- core/140W) Processor Motherboard: Intel C621 /higher series chipset Memory: 288GB DDR4 @ 2933MHz, 16 DIMM slots or higher Memory protection: Advanced ECC HDD: 1 x 2TB SATA Networking: 2 port 1G Ethernet, 1 x 100G IB-EDR/OPA Management port: 1G dedicated remote management port Bus slots: Ability to be configured with minimum two PCIe -Gen3 (x8/16) low profile IO slots Management:


15

(c) GPU Node

a) System remote management should support browser based graphical remote console along with Virtual Power button, remote boot using USB/CD/DVD Drive. It should be capable of offering upgrade of software and patches from a remote client using Media/image/folder; It should support server power capping and historical reporting and should have support for multifactor authentication. b) Server should have dedicated 1Gbps remote management port. c) Remote management port should have storage space earmarked to be used as a repository for firmware, drivers and software components. The components can be organized in to install sets and can be used to rollback/patch faulty firmware d) Server should support agent less management using the out-of-band remote management port. e) Server shall provide insights, forecasting and recommendations for quicker problem resolutions including automating case creation for enhanced service experience Warranty: 5-year Parts, 5-year labour, 5-year onsite Support with NBD Hardware replacement. GSTN 21AAACE6958LIZG PAN AAACE6958L Make HPE Model HPE Apollo R2200 12LFF(1) - Chassis

HPE ProLiant XL 170R (4) - Server (4 server enclosure)

Basic Price of each Rs. 33,81,000.00 Total cost of equipment Rs. 33,81,000.00 Educational discount NIL Price after discount Rs. 33,81,000.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment Rs. 1,69,050.00 Standard Warranty provided Yes (5 Years) Extended warranty/CAMC After warranty period



Form factor: 2U rack mountable CPU: 2 x Intel Xeon-Gold 6238 (2.1GHz/22-core/140W) Processor Motherboard: Intel C621/higher series chipset Memory: 288GB DDR4 @ 2933MHz, 24 DIMM slots or higher Memory protection: Advanced ECC with multi-bit error protection, Online spare, mirrored memory HDD: 1 x 2TB SATA Networking: 4 port 1G Ethernet, 1 x 100G IB-EDR/OPA GPU: Each of the nodes should be configured with 2 x NVIDIA T4 16GB GPUs & must be scalable to 3 GPUs in future.


16

(d) Storage Node

Interface: Micro SD slot (1 no), USB 3.0 (5 no’s) Bus Slots: Three PCI-Express 3.0 slots, at least two x16 PCIe slots Power Supply: Hot plug redundant low halogen power supplies, minimum 90% efficiency. Cooling: Redundant hot-plug system fans Management: a) System remote management should support browser based graphical remote console along with Virtual Power button, remote boot using USB/CD/DVD Drive. It should be capable of offering upgrade of software and patches from a remote client using Media/image/folder. It should support server power capping and historical reporting and should have support for multifactor authentication. b) Server should have dedicated 1Gbps remote management port. c) Remote management port should have storage space earmarked to be used as a repository for firmware, drivers and software components. The components can be organized in to install sets and can be used to rollback/patch faulty firmware d) Server should support gentles management using the out-of-band remote management port. e) Server shall provide insights, forecasting and recommendations for quicker problem resolutions including automating case creation for enhanced service experience Warranty: 5-year Parts, 5-year labour, 5-year onsite Support with NBD Hardware replacement. GSTN 21AAACE6958LIZG PAN AAACE6958L Make HPE Model HPE DL380 Basic Price of each Rs. 13,71,200.00 Total cost of equipment Rs. 13,71,200.00 Educational discount NIL Price after discount Rs. 13,71,200.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment Rs. 68,560.00 Standard Warranty provided Yes (5 Years) Extended warranty/CAMC After warranty period



Solution to be offered for 100TB PFS storage with 4GB/sec Write performance using IOR. Solution should be scalable to 200TB. Commercial support up to L3 should be quoted for offer Parallel File System Usable capacity for OSS should be min. 100TB usable RAID6 (Hardware / Software RAID). Preferred disk layout: 9D + 2P or 8D + 2P. Minimum NL SAS disks (12Gbps) or SAS or SSD can be used.


17

(e) IB Switch

Usable capacity for MDS:-Vendor should size as per solution/ performance requirement. The usable capacity should be min. 2% of the OST capacity. Storage Array. The Storage Array used for MDS and OSS can be common or independent as per solution requirement. Node requirement for MDS/OSS: - The solution should be configured with minimum 4 nodes, i.e. one MDS Node pair and one OSS node pair. The MDS node should be configured with 2 x Minimum 6-core@3GHz CPU and 96GB Memory or better. The OSS node should be configured with 2 x Minimum 12-core@3GHz CPU and 384GB Memory or better CPU and memory specifications. In case of any node failure, the services should start from the other surviving node, without any manual intervention. One hard disk each to be configured as spare for both Metadata and OSS. Spare can be either hot spares. Solution should be configured with No Single Point of Failure including Power Supplies and fans. Warranty: 5-year Parts, 5-year labour, 5-year onsite Support with NBD Hardware replacement. GSTN 21AAACE6958LIZG PAN AAACE6958L Make HPE Model HPE DL360 (4), D6020(1) Basic Price of each Rs. 69,34,600.00 Total cost of equipment Rs. 69,34,600.00 Educational discount NIL Price after discount Rs. 69,34,600.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment Rs. 3,46,730.00 Standard Warranty provided Yes (5 Years) Extended warranty/CAMC After warranty period



100% non-blocking factor with a Fat Tree topology with 100Gbps InfiniBand/Intel OPA switch with redundant power supplies. Cables as per solution requirements should be included. Warranty: 5-year Parts, 5-year labour, 5-year onsite Support with NBD Hardware replacement. GSTN 21AAACE6958LIZG PAN AAACE6958L Make Mellanox Model Mellanox IB EDR v2 36p


18

(f) Ethernet Switch

Basic Price of each Rs. 7,21,000.00 Total cost of equipment Rs. 7,21,000.00 Educational discount NIL Price after discount Rs. 7,21,000.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment Rs. 36,050.00 Standard Warranty provided Yes (5 Years) Extended warranty/CAMC After warranty period



24-port 1G Ethernet switch with additional 4-port 1G SFP ports Rack mount configuration with mounting kits Minimum 800MHz processor, 1GB Flash, and 1GB RAM 56Gbps throughput and 41.7 Mpps packet forwarding capacity 30K MAC address table, REST API, OpenFlow/equivalent, VxLAN IPv6 security: RA Guard, and DHCPv6 Protection, PBR Console access: Serial, USB Warranty: 5-year Parts, 5-year labour, 5-year onsite Support with NBD Hardware replacement. GSTN 21AAACE6958LIZG PAN AAACE6958L Make Aruba Model Aruba 2930F 24G Basic Price of each Rs. 1,13,400.00 Total cost of equipment Rs. 1,13,400.00 Educational discount NIL Price after discount Rs. 1,13,400.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment Rs. 5,670.00 Standard Warranty provided Yes (5 Years) Extended warranty/CAMC After warranty period



19

(g) Rack (42U, Server Rack) and KVM Switch


Server Racks should be of 600 mm wide and 1200 mm deep with caster wheels and leveling feet, front and Back doors perforated with min 77% perforation, cable entry from the top and bottom, vertical equipment mounting space of 42U and each U position marked with its numbering both on the Front and Back 19 Inch Rail, vertical mounting rails having two sets of EIA mounting holes perpendicular to the primary mounting holes to allow devices to be mounted in the side channel, front and rear doors should open a minimum of 148 degrees for easy access to the interior, the front door to be field reversible so that it may open from either side, frame to support 1360kg static weight load,1022kg dynamic (non- transit) weight load, and 907kg transit weight load, sheet metal components powder coated RAL7021(Black) Two nos. IP PDU with each rack, each IP PDU should have Minimum IEC 320 C13 x 30 and IEC 320 C19 x 6 No. of output sockets, Input current rating: 3 phase and 16A as per requirement for load upto 11KW. It should support High Operating temperature of 0 to 60 deg C, hot swappable Communication module in the rack PDU with dual Ethernet Ports, reporting error thru email or any other suitable model. Minimum 16-port KVM Switch with all cables & adapters, 17” rack console with integrated keyboard & touchpad, Warranty: 5-year Parts, 5-year labour, 5-year on site Supports NBD On Hardware and software. GSTN 21AAACE6958LIZG PAN AAACE6958L Make VERTIV Model 42U VR RACK

( KVM Switch: LRA195KMM16D-001) Basic Price of each Rs. 3,92,300.00 Total cost of equipment Rs. 3,92,300.00 Educational discount NIL Price after discount Rs. 3,92,300.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment Rs. 19,615.00 Standard Warranty provided Yes (5 Years) Extended warranty/CAMC After warranty period




20

(h) Precision Air Conditioner

(i) Online UPS (40KVA)

a) Precision air conditioner having digital scroll Compressor, EC fan compatible with R 410 A Refrigerant with horizontal air flow pattern, can be placed in-between the racks or at the ends of rows, close to the heat source with 20kW Nominal capacity to work in 1+1 configuration. Inside room temperature and humidity should maintain 22+/-1 deg C, 50+/-5 RH respectively against maximum ambient outside temperature and humidity of 45 deg C and 90% respectively. Outdoor Condenser unit shall comprise of Copper coil with Aluminium fins and Axial fan with fan speed controller motor. The outdoor unit shall be IP54 type of protection. b) The vendor must provide 5 years comprehensive warranty for all software and hardware components. The vendor will thus be responsible for upkeep, update and upgrade of the software components and maintenance as well as replacement of faulty hardwares for 5 years. c) The OEM should have their service Centre at Bhubaneswar and they should have 24x7 after sales support system. The OEM should have supplied Precision AC System to at least two customers for HPC application. GSTN 21AAACE6958LIZG PAN AAACE6958L Make Liebert Model Liebert CRV 20 Basic Price of each Rs. 16,42,722.00 Total cost of equipment Rs. 16,42,722.00 Educational discount NIL Price after discount Rs. 16,42,722.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment Rs. 82,136.10 Standard Warranty provided Yes (5 Years) Extended warranty/CAMC After warranty period


Any other Taxes/ Charges (if any) NIL On Site Delivery price Rs.17,24,858.10 Order to be placed with: M/s- Embee Software Pvt. Ltd., A-154, Second Floor, Eastern Block, Sahid Nagar,, Bhubaneswar-07, [email protected], [email protected], 0674-2540550(O), 9437364173/9337126529(M), 0674-2540550(O)

40KVA UPS System with IGBT based rectifier and Inverter 0.9 output power factor, 3 phase input & output to work in N+N parallel redundant configuration with SMF Battery bank for 60 minutes back up. Each UPS System should have inbuilt static, Maintenance bypass switch and Battery breaker in UPS to Battery path. UPS & Battery should have 5years warranty. GSTN 21AAACE6958LIZG PAN AAACE6958L Make Liebert Model Liebert ITA


21

D-2: Desktop Computer

Basic Price of each Rs. 16,19,300.00 Total cost of equipment Rs. 16,19,300.00 Educational discount NIL Price after discount Rs. 16,19,300.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment Rs. 80,965.00 Standard Warranty provided Yes (5 Years) Extended warranty/CAMC After warranty period



Processor: Intel 8th Generation Core i7 with 3.2 GHz, 6 core with V-Pro Motherboard: Intel Q370 or better Chipset on OEM Motherboard Memory: 8GB DDR4 RAM expandability up to 64 GB on 4 DIMM Slots, (Non-ECC dual-channel up to 2666 MT/s DDR4 SDRAM) Graphics: In built Intel integrated graphics HDD / HDD Controller : 1 TB 7200 RPM, SATA III 6 Gbps, with pre-failure alert indication Network Controller & HBA: Integrated onboard Ethernet controller 10/100/1000mbps with remote wakeup Security/Certification : TPM 2.0, Energy star, ROHS, EPEAT certification for India, FCC, ISO 9001,14001,20001,27001 Monitor : 23.8" or higher IPS Panel LED backlit with Minimum resolution of 1920x1080 with VGA & HDMI input Optical Drive: DVD RW drive Operating System : Pre-installed Windows 10 Professional 64 bits Form factor : Tower Keyboard: USB keyboard Mouse: USB Optical Scroll Mouse Ports and Slots : Minimum 10 USB Ports, out of which 5 USB Ports should be in front for easy access 1 Universal audio jack for headphone / Mic, HDMI video port; Display Port/DVI-D Port, RJ-45 network connector, serial Port, Audio –out, Audio-in Minimum 4 PCI/PCIe Slots, (1 x PCIex16, 1 x PCIex4,1 x PCIex1,1 PCI) & 2x (M.2 PCIe) Audio : High Definition Integrated Audio with Internal Speaker Power : 400W power supply with 92% efficiency GSTN 21BXLPS0038P1Z5 PAN BXLPS0038P Make HP Model HP Pro Desk 600G5 Micro Tower PC Basic Price of each Rs. 59,200.00 Total cost of equipment Rs. 59,200.00


22

D-3: Workstation

Educational discount NIL Price after discount Rs. 59,200.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment GST @ 18% Rs. 10,656.00 Standard Warranty provided 3 Years On-site Extended warranty/CAMC NA Any other Taxes/ Charges (if any) NIL On Site Delivery price Rs. 69,856.00 Order to be placed with: M/s- Bithal Sales and Solutions, Plot no.-409/12, Near Shiv Temple, SishuVihar, Patia, Bhubaneswar-751024, Odisha, [email protected], 0674-2744342, Mob-9090960541

MB Smart Cache or better Processor Motherboard Intel C 246 Chipset Motherboard Memory 32 GB DDR4 2666 MHz RAM expandability up to 128 GB on 4 DIMM Slots, or higher Graphics N-VIDIA Quadro P2000 or better graphics card (Certified drivers for card application) to be supplied HDD / HDD Controller 2 TB 7200 RPM, SATA Hard disk with integrated SATA controller, Should support RAID 0,1 Network Controller & HBA Integrated onboard Ethernet controller 10/100/1000mbps with Intel V Pro & Intel AMT 12.0 support Security/Certification EPEAT, TPM 2.0,SATA Port disablement, Power on Password Monitor 23.8" or higher IPS Panel LED backlit with Minimum resolution of 1920x1080 with VGA & HDMI input Optical Drive DVD RW Operating System Pre-installed Windows 10 Professional 64 bits (Workstation) with authentication Form factor Tower/SFF Mouse USB optical scroll mouse Ports and Slots Minimum 6 USB Ports , 1 Universal audio jack for headphone / Mic Display Port, RJ-45 network connector, serial Port, Minimum 4 PCI/PCIe Slots (1 x PCIex16, 1 x PCIex4,1 x PCIex1,1 PCI) & 2x M.2, 1xM.2 WLAN Audio High Definition Integrated Audio with Internal Speaker Power 310W power supply with 90% efficiency GSTN 21BXLPS0038P1Z5 PAN BXLPS0038P Make HP Model HP Z2 Tower G4 Basic Price of each Rs. 1,37,000.00 Total cost of equipment Rs. 1,37,000.00 Educational discount NIL Price after discount Rs. 1,37,000.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment GST @ 18% Rs. 24,660.00 Standard Warranty provided 3 Years On-site Extended warranty/CAMC NA Any other Taxes/ Charges (if any) NIL On Site Delivery price Rs. 1,61,660.00


23

D-4: Network Laser Printer

D-5: Laptop

Order tobe placed with: M/s- Bithal Sales and Solutions, Plot no.-409/12, Near Shiv Temple, SishuVihar, Patia, Bhubaneswar-751024, Odisha, [email protected], 0674-2744342, Mob-9090960541

Network ready, A3 & A4 size, Dual tray with by-pass, speed minimum 50ppm, duplex facility, Enlarge & reduction features, Auto Document Feeder, Scanning speed minimum 50 ppm. Warranty: 3 years GSTN 21 ABTPS2561A1ZU PAN ABTPS2561A Make Konica Minolta Model BH-558e (B & W) Basic Price of each Rs. 2,85,713.33 Total cost of equipment Rs. 2,85,713.33 Educational discount Nil Price after discount Rs. 2,85,713.33 Customs clearing charges (if applicable) Nil Packing, forwarding and insurance charges (if any) Nil GST@5% on equipment GST @ 5% Rs. 14,285.67(on production of

circular letter ) Standard Warranty provided 3 years onsite warranty Extended warranty/CAMC After warranty period

CAMC for 1st year= Rs. 23,600/- CAMC for 2nd year= Rs. 23,600/- CAMC for 3rd year= Rs. 25,600/- CAMC for 4th& 5th year= Rs. 27,600/- Tax/GST as applicable during that period or the contract prices are inclusive of @ 5% GST.

Any other Taxes/ Charges (if any) Nil On Site Delivery price Rs. 2,99,999.00 Order to be placed with : M/s-B N reprographics Services, Plot No.-201, Saheed Nagar, Bhubaneswar-751007, [email protected], 0674-2548310,2548309, 9437061810

Core i3 7th Generation Processor 8Gb DDR4 RAM 64 Bits Windows 10 Operating system 14” display GSTN 21BXLPS0038P1Z5 PAN BXLPS0038P Make HP Model HP 240 G7 Notebook PC Basic Price of each Rs. 32,966.10 Total cost of equipment Rs. 32,966.10 Educational discount NIL Price after discount Rs. 32,966.10 Customs clearing charges (if applicable) NIL


24

D-6: Online UPS (6 KVA)

Packing, forwarding and insurance charges (if any) NIL GST@5% on equipment GST @ 18% Rs. 5933.90 Standard Warranty provided 3 Years On-site Extended warranty/CAMC NA Any other Taxes/ Charges (if any) NIL On Site Delivery price Rs. 38,900.00 Order to be placed with: M/s- Bithal Sales and Solutions, Plot no.-409/12, Near Shiv Temple, SishuVihar, Patia, Bhubaneswar-751024, Odisha, [email protected], 0674-2744342, Mob-9090960541

6KVA On Line UPS System with IGBT based rectifier and Inverter unity output power factor, 1 phase input & output, inbuilt isolation transformer, inbuilt static & maintenance bypass switch, 50 deg C operating temperature with SMF Battery bank for 30 minutes back up. UPS & Battery should have 5years warranty. GSTN 21AAJFP5115E1ZQ PAN AAJFP5115E Make Powertek Model Powertek 6KVA Basic Price of each UPS – Rs. 51,559.32

Battery – Rs. 60,000.00 Battery Stand – Rs. 2,000.00

Total – Rs. 1,13,559.32 Total cost of equipment Rs. 1,13,559.32 Educational discount NIL Price after discount Rs. 1,13,559.32 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) Rs. 3,000.00 GST@5% on equipment @18% on UPS – Rs. 9,280.68

@28% on Battery – Rs. 16,800.00 @18% on Battery Stand – Rs. 360.00

Standard Warranty provided 5 Years On-site Extended warranty/ CAMC Yes (As per checklist)

Rs. 11,000.00 + Applicable GST per year without battery.

Any other Taxes/ Charges (if any) Rs. 2,000.00 On Site Delivery price Rs. 1,45,000.00 Order to be placed with: M/s- P.S. Enterprise, 7/48, M.I.G-II, B.D.A Colony, Chandrasekharpur, Bhubaneswar-751016 , [email protected], 9437004176 (M)


25

D-7: LAB Networking

(a) Network Switch

B, C, D, E, F, G & H: 24 Port Patch panel, I/O Box (Single), Cat-6 Cable, Patch cord 1 Mtr. & 2 Mtr., 9U Wall mount Rack, Installation Charges and Cable management

(a) Network Switch 48-port 1G Ethernet switch with additional 4-port 10G SFP+ ports Rack mount configuration with mounting kits Minimum 1GHz processor, 1GB RAM and 1GB Flash 176Gbps throughput and 112 Mpps packet forwarding capacity 30K MAC address table, REST API, sFlow, Open Flow/equivalent, VxLAN RMON and Extended RMON, 1500 VLAN IPv6 security: RA Guard, and DHCPv6 Protection, PBR Console access: Serial, USB Stacking module and cable as applicable OEM should be in Gartner’s leader quadrant consecutively for 3 Years in LAN category Warranty: 5-year Parts, 5-year labour, 5-year onsite Support with NBD Hardware replacement. GSTN 21BXLPS0038P1Z5 PAN BXLPS0038P Make HPE Model Aruba 2903F48G4SFP+ Basic Price of each Rs. 1,49,490.00 Total cost of equipment Rs. 1,49,490.00 Educational discount NIL Price after discount Rs. 1,49,490.00 Customs clearing charges (if applicable) NIL Packing, forwarding and insurance charges (if any) NIL GST@ 18% on equipment Rs. 26,908.20 Standard Warranty provided 3 Years in LAN category,

5 Years on Labour and Parts, 5 Years On-site support with NBD H/W replacement.

Extended warranty/CAMC NA Any other Taxes/ Charges (if any) NIL On Site Delivery price Rs. 1,76,398.20 Order to be placed with: M/s- Bithal Sales and Solutions, Plot no.-409/12, Near Shiv Temple, Sishu Vihar, Patia, Bhubaneswar-751024, Odisha, [email protected], 0674-2744342, Mob-9090960541

(b) Patch Panel: 24-port CAT6 patch panel (loaded) (c) I/O Box: I/O (Single) with box and faceplate (d) CAT6 Cable: CAT 6 Cable (305 meters) (e) Patch Cord (1m): CAT6 1 meter patch cord, factory crimped (f) Patch Cord (2m): CAT6 2 meter patch cord, factory crimped (g) Wall Mount Rack: 9U wall mount rack with all accessories (h) Installation Charges including Cable : Management (L/S-01) GSTN 21BXLPS0038P1Z5 PAN BXLPS0038P


26

GROUP E: FURNITURE AND MISCELLANEOUS ITEMS E-1: Wooden Cot (for Hostel)

Size: (L) 78” (L) x 36” (B) x 18” (H) Frame made of sal wood Top Made of non sal wood plank Make M/S Janla Wood Products Co-

operative Society ltd. Model GSTN 21AAABJ0233AA1ZS PAN AAABJ0233A warranty 3 YEARS Price 7,530/- Discount - Price after discount 7,530/- Packing, forwarding,insurance etc., installation charges - Taxes: GST 1335 @ 18% Onsite delivery price (Rs. Rs.8885/- Order to be placed with : M/s Janla Wood Products Co-operative Society Ltd.,AT/PO.Janla, dist: Khurda, email: [email protected], Mob:8763333900

E-2: Wooden Chair

Seating height: 460 mm, seat size (455 mm – 510 mm) x (455 mm – 510 mm) Back height: 990 mm; Legs: four of size: at least 45 mm x 45 mm. Sal wood frame, Seat material: 19 mm DWR Ply (ISI mark) fixed with 1mm mica (ISI Mark), Wood color polishing and finishin Make M/S Janla Wood Products Co-

operative Society Ltd. Model GSTN 21AAABJ0233AA1ZS

EMD Rs. 4,900/-, 150148, PNB Make D-Link Model Basic Price of each Rs. 58,130/- Total cost of equipment Rs. 58,130/- Educational discount Nil Price after discount Rs. 58,130/- Customs clearing charges (if applicable) Nil Packing, forwarding and insurance charges (if any) Nil GST@18% on equipment @18%: Rs. 10,463.40 Standard Warranty provided Yes (3 years on-site) Extended warranty/CAMC -- Any other Taxes/ Charges (if any) Nil On Site Delivery price Rs. 68,593.40 Order to be placed with: M/s- Bithal Sales and Solutions, Plot no.-409/12, Near Shiv Temple, SishuVihar, Patia, Bhubaneswar-751024, Odisha, [email protected], 0674-2744342, Mob-9090960541


27

PAN AAABJ0233A warranty 3 YEARS Price 5,305/- Discount - Price after discount 5,305/- Packing, forwarding,insurance etc., installation charges - Taxes: GST 955 @ 18% Onsite delivery price (Rs. Rs.6,259/- Order to be placed with : M M/s Janla Wood Products Co-operative Society Ltd.,AT/PO.Janla, dist: Khurda email: [email protected], Mob:8763333900

E-3:Wooden Table

Size 3’ x 2’ , height 2’6” , Legs four 45 mm x 45 mm, sal wood frame, top made up of 19 mm DWR ply (ISI mark) fixed with 1 mm mica, wood colour polish and finishing Make M/S Janla Wood Products Co-

operative Society lt Model GSTN 21AAABJ0233AA1ZS PAN AAABJ0233A warranty 3 YEARS Price 6048/- Discount - Price after discount 6048/- Packing, forwarding,insurance etc., installation charges - Taxes: GST @5% against DSIR certificate 1089 @ 18% Onsite delivery price (Rs. Rs.7,137/- Order to be placed with : M/s Janla Wood Products Co-operative Society Ltd.,AT/PO.Janla, dist: Khurda, email: [email protected], Mob:8763333900

E-4: Dining Table with granite top

Size 8’ x 3’ , height 2’6” , six nos., stainless steel of tubular frame of 16 gauge s.s, polished granite top Make M/S Janla Wood Products Co-

operative Society lt Model GSTN 21AAABJ0233AA1ZS PAN AAABJ0233A warranty 3 YEARS Price 22,694/- Discount - Price after discount 22694/- Packing, forwarding,insurance etc., installation charges - Taxes: GST @5% against DSIR certificate 4085 @ 18% Onsite delivery price (Rs. Rs.26,779/- Order to be placed with : M/s Janla Wood Products Co-operative Society Ltd.,AT/PO.Janla, dist: Khurda email: [email protected], Mob:8763333900


28

Annexure I BANK GUARANTEE FORM FOR PERFORMANCE SECURITY

The Comptroller Odisha University of Agriculture & Technology Bhubaneswar 751003 WHEREAS ……………………………………………………………………………. (Name and address of the Supplier) (hereinafter called “the Supplier”) has undertaken, in pursuance of purchase order no……………………. dated …………. to supply ………(description of goods and services) (herein after called “the contract”). AND WHEREAS it has been stipulated by you in the said purchase order that the Supplier shall furnish you with a bank guarantee by a scheduled commercial bank recognized by you for the sum specified therein as security for compliance with its obligations in accordance with and due performance of the contract; AND WHEREAS we have agreed to give the Supplier such a bank guarantee; NOW THEREFORE we hereby affirm that we are guarantors and responsible to you, on behalf of the Supplier, up to a total of Rs. …………………………………………… ……………………………. (amount of the guarantee in words and figures), and we hereby irrevocably and absolutely undertake to pay you immediately, upon your first written demand declaring the Supplier to be in default under the contract and without cavil or argument, any sum or sums within the limits of (amount of guarantee) as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the sum specified therein. We hereby waive the necessity of your demanding the said debt from the Supplier before presenting us with the demand. We agree that no change or addition to or other modification of the terms of the contract to be performed there under or of any of the contract documents which may be made between you and the Supplier shall in any way release us from any liability under this guarantee and we hereby waive notice of any such change, addition or modification. The Bank guarantee shall be interpreted in accordance with the laws of India. The Guarantor Bank represents that this Bank Guarantee has been established in such form and with such content that is fully enforceable in accordance with its terms as against the Guarantor Bank in the manner provided herein. The Bank Guarantee shall not be affected in any manner by reason of merger, amalgamation, restructuring or any other change in the constitution of the Guarantor Bank or the Supplier. The Bank further undertakes not to revoke this Guarantee during its currency except with the previous express consent of the Purchaser in writing. The Bank declares that it has power to issue this Guarantee and discharge the obligations contemplated herein, the undersigned is duly authorized and has full power to execute this Guarantee for an on behalf of the Bank. This guarantee shall be valid up to and including the ……. day of ………, 20…… ……………………………. (Signature with date of the authorised officer of the Bank) …………………………………………………………. Name and designation of the officer …………………………………………………………. Seal, name & address of the Bank and address of the Branch


29

Annexure II BANK GUARANTEE PROFORMA FOR ADVANCE PAYMENT

(ON NON-JUDICIAL STAMP PAPER OF AN APPROPRIATE VALUE) The Comptroller Odisha University of Agriculture & Technology Bhubaneswar 751003 Dear Sir, we______________________________ (name & address of bank) hereby refer to the Purchase Order no____, dated________ and pro-forma Invoice/Bill no____ dated _____ between ______________ (Name & address of indenting officer), herein after called as indenter and M/s________________, herein after called as supplier in terms of the tender No. _______ for supply of ___________ with onsite delivery price of _______. This guarantee shall be construed as an irrevocable, absolute, unconditional and direct guarantee for an amount of Rs. ______ without regard to the validity, regularity or enforceability of any obligation of the parties to the purchase order & proforma invoice/bill. The Comptroller, OUAT shall be entitled to enforce this guarantee without being obliged to resort initially to any other security or to any other remedy to enforce any of the obligations herein guaranteed and may pursue any or all of it remedies at one or at different times. Upon default of the supply & successful installation and demonstration at indenter site, we agree to pay to the Comptroller, OUAT, Bhubaneswar on demand and without any demur the sum of Rs. __________________ or any part thereof, immediately upon presentation of a written statement by the Comptroller, OUAT, Bhubaneswar that the amount of said demand is due from the Supplier to the _______ (Indenting officer), OUAT by virtue of breach of supply, installation & demonstration by the Supplier under the terms of the aforesaid purchase order &pro-forma invoice/bill. Notwithstanding any dispute or disputes raised by the supplier in any suit or proceeding pending before any Court or Tribunal relating thereto, liability under this present guarantee is absolute and unequivocal. The determination of the amount due under the guarantee shall be in the sole discretion of the Comptroller, OUAT, Bhubaneswar whose decision shall be conclusive and binding on us as guarantor. It is mutually agreed that the Comptroller, OUAT, Bhubaneswar shall have the fullest liberty without affecting in any manner our obligation hereunder with or without our consent to vary any of the terms of the said purchase order or to extend the time for performance by the Supplier, from time to time any of the powers exercisable by the Comptroller, OUAT, Bhubaneswar against the Supplier and either to forebear or enforce any of the terms and conditions relating to the said Purchase Order and we shall not be relieved from our liability by reasons of any variation or any extension being granted to the Supplier or for any forbearance, act or omission on the part of the Comptroller, OUAT, Bhubaneswar or any indulgence by the Comptroller, OUAT, Bhubaneswar to the Supplier or by any such matter or thing whatsoever which under the law relating to the sureties would but for this provision have effect of so relieving our obligation. This guarantee is confirmed and irrevocable and shall remain in effect until _____________________ and such extended periods, which may be mutually agreed to. We hereby expressly waive notice of any said extension of the time for performance and alteration or change in any of the terms and conditions of the said Purchase order. This guarantee will not be discharged due to change in constitution of the Bank or the Contractor. We ______________________ (Name of the Bank) undertake not to revoke this guarantee during its currency without written consent of the authority. This guarantee will not be discharged due to change in the constitution of the Bank or the Supplier. Very truly yours, ------------------------------------------------------- --------------------------------------------------------- (Name, Seal & Authorised Signature of the Bank and date)


30

Annexure III

MODEL CERTIFICATE OF INSTALLATION No. _____ Dated

1. Reference: Purchase Order No…………. Dt….. Invoice no……..Contract No. ……… dt….. 2. It is certified that

a. M/s _____________have completed installation of ______________ (name of equipment) on ______________ [date(s)] and Site Acceptance Test (SAT) and other inspection & tests, as stipulated in the purchase order on, ______________ [date(s)]to the satisfaction of the Purchaser and user at the designated site ______ (name of the site).

b. Records of SAT and other inspection & tests are annexed to this Certificate. c. Sample test, Software, Instruction Manual & Technical Manual, Soft & hard copies of Documentation, etc.

have been taken over (all documents required to be delivered at the time of SAT).

For Tenderer For Purchaser

Witness: Witness:

Signature Signature

Name Name

Designation Designation

Address Address

Date Date

Documents

CPC rate contract Gr -A-B-D-E-18-05-20 - OUAT